Related
I upgraded my phone using the leaked ICS build that hit a little bit before the final one was released. I would like to get my phone updated to the official ICS build. I was looking through GSLEON's thread in the dev forum and he mentions:
GSLEON3 said:
The absolute safest way to update to ICS is to relock your device & return it to as close to stock as you can get it. Relocked you can flash the leaked GB AT&T rom in football's thread.
Click to expand...
Click to collapse
I found the thread: http://forum.xda-developers.com/showthread.php?t=1338919 and am downloading RUU_Holiday_Cingular_US_1.63.502.4_Radio_1.11.1020.03_30.77.551061.02L_release_221238_signed.exe
In the "Official AT&T Vivid ICS RUU from HTC" thread GSLEON3 says
GSLEON3 said:
Make sure that if you have a custom recovery that is is updated & double check that it is. Write the version numbers down to confirm, both before & after.
There was an early recovery that could not (CANNOT) be overwritten without flashing a modified PH39IMG file first, then flashing stock or new modified recovery.
If you update with your device with that original recovery, you may be very sorry.
Click to expand...
Click to collapse
I'm pretty sure this applies to me, here's my information:
Code:
Locked
Holiday PVT Ship S-On RL
Hboot-1.85.0024
MICROP-0360
OpenADSP-v02.6.0.226.00.0202
eMMC-boot
Feb 10 2012,22:49:47
Software Information
More Screen
My problem with this is two-fold:
1. I'm not sure where to get the specially modified ph39img
2. I'm really nervous because I like my phone a lot!
Any help you can offer would be really appreciated!
Here's a screenshot of my homescreen because I accidentally took one while getting it out of the case!
newsaint said:
I upgraded my phone using the leaked ICS build that hit a little bit before the final one was released. I would like to get my phone updated to the official ICS build. I was looking through GSLEON's thread in the dev forum and he mentions:
I found the thread: http://forum.xda-developers.com/showthread.php?t=1338919 and am downloading RUU_Holiday_Cingular_US_1.63.502.4_Radio_1.11.1020.03_30.77.551061.02L_release_221238_signed.exe
In the "Official AT&T Vivid ICS RUU from HTC" thread GSLEON3 says
I'm pretty sure this applies to me, here's my information:
Code:
Locked
Holiday PVT Ship S-On RL
Hboot-1.85.0024
MICROP-0360
OpenADSP-v02.6.0.226.00.0202
eMMC-boot
Feb 10 2012,22:49:47
Software Information
More Screen
My problem with this is two-fold:
1. I'm not sure where to get the specially modified ph39img
2. I'm really nervous because I like my phone a lot!
Any help you can offer would be really appreciated!
Here's a screenshot of my homescreen because I accidentally took one while getting it out of the case!
Click to expand...
Click to collapse
Well firstly the RUU your referring to is for official gingerbread. You dont need to flash the modified file unless you have the old recovery so thats un needed. Use this official RUU link http://dl3.htc.com/application/htc_vivid_att_RUU_3.26.502.56_US.exe to flash your phone to the official ics build.
Thanks for the heads up, sorry for misinterpreting things. I'll give this a go when I get off work!
Looks like it worked! Thanks again
TWRP OK?
I have done some research on this and have found that I can get s-off by flashing a RUU rom. The thing is is that I have to have an updated recovery. Right NOw i have the TWRP 2.4.4.0 and wondering if Im good to flash the RUU or if i need to return to stock recovery.
I dont mind losing root as I can re root it.
Originally Posted by sketchscarz View Post
I used the steps and it gives me this message. I am s-on
Old beer detected...... Ple
Starting up......
Connecting to device...
Backing up......
Transferring backups....
Secondary backup FAILED!!
Press ENTER to exit.....
Try it again but you have to use original RUU ICS for your device before following these steps
you can download that from here : http://forum.xda-developers.com/show....php?t=1564776
vivid almost unlocked need to verify recovery or flash stock recovery
config.dat ran to change radio, since not s=off failed.
need to flash recovery to stock recovery/ current recovery could brick phone whjen flashing stock RUU .IMG ROM
Not positive that i have the recovery that makes brick sandwich, becasue there is a old recovery that does not allow certain system files to fetch the files needed to install RUU.
Need to verify recovery/flash stock RUU rom
if recovery is not verified / flash stock recovery
proceed to write radio
---------- Post added at 03:58 AM ---------- Previous post was at 03:25 AM ----------
sketchscarz said:
config.dat ran to change radio, since not s=off failed.
need to flash recovery to stock recovery/ current recovery could brick phone whjen flashing stock RUU .IMG ROM
Not positive that i have the recovery that makes brick sandwich, becasue there is a old recovery that does not allow certain system files to fetch the files needed to install RUU.
Need to verify recovery/flash stock RUU rom
if recovery is not verified / flash stock recovery
proceed to write radio
Click to expand...
Click to collapse
Found some more research with the borked ROm which seems to turn s-off. The rom is compiled from a stock ruu so im thinking I can still flash this Unlock_code.bin and get me unlocked with this awesome rom
http://forum.xda-developers.com/showthread.php?t=2171741
all thanks goes to homeslice976 and please dont beat me up for posting your link as I am looking for easier ways to get this phone unlocked so i can activate it on tmobile.
It seems that I have found an alternative to having the bootloader unlocked and the s-off to be able to change the radio to tmobile with Unlock_code.bin on the stock RUU img
I have since flashed the WXC recovery pretty awesome wildchild, great work!
Hey guys,
Right, I have a hardware issue with my phone so need to return it to Three UK.
Currently I have Android Revolution HD 11 on my phone and have updated to 2.17 firmware, s-off.
So I need stock, firmware to be reverted to 1.28.771 and to change my CID to H3G__001 (currently HTC__001). There doesn't appear to be an RUU for three.
First off I'm assuming the H3G nandroid backup in the "[COLLECTION] HTC M7 RUU, OTA, and Stock Nandroid Downloads" thread doesn't actually touch the firmware so it would remain at 2.17?
So my thinking is this:
Flash the generic europe RUU (do I need to lock my bootloader before doing this)? (RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13. 3231.27_10.31.1131.05_release_310878_signed.exe)
Change CID to H3G__001
Nandroid restore of H3G ROM. (M7 CWM Nandroid Backup / CID H3G__001 / 1.28.771.x )
s-off to lock and remove tamper.
s-on.
OTA update?
Will this work?
Or does anyone have a link to the 1.28.771 firmware?
Thanks for the help.
Ardmanz said:
Hey guys,
Right, I have a hardware issue with my phone so need to return it to Three UK.
Currently I have Android Revolution HD 11 on my phone and have updated to 2.17 firmware, s-off.
So I need stock, firmware to be reverted to 1.28.771 and to change my CID to H3G__001 (currently HTC__001). There doesn't appear to be an RUU for three.
First off I'm assuming the H3G nandroid backup in the "[COLLECTION] HTC M7 RUU, OTA, and Stock Nandroid Downloads" thread doesn't actually touch the firmware so it would remain at 2.17?
So my thinking is this:
Flash the generic europe RUU (do I need to lock my bootloader before doing this)? (RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13. 3231.27_10.31.1131.05_release_310878_signed.exe)
Change CID to H3G__001
Nandroid restore of H3G ROM. (M7 CWM Nandroid Backup / CID H3G__001 / 1.28.771.x )
s-off to lock and remove tamper.
s-on.
OTA update?
Will this work?
Or does anyone have a link to the 1.28.771 firmware?
Thanks for the help.
Click to expand...
Click to collapse
Any ideas?
You don't have to lock the bootloader and you need s-off to downgrade.
http://forum.xda-developers.com/showpost.php?p=42396455&postcount=20
Rest of the steps...well sounds good but unfortunatelly i'm not expert so dunno
I'm really interested if it works this way for you as i have a VF-uk one, and once i have to go back to stock this info would be really helpful.
Please let we know your progress
Good luck
prodizo said:
You don't have to lock the bootloader and you need s-off to downgrade.
http://forum.xda-developers.com/showpost.php?p=42396455&postcount=20
Rest of the steps...well sounds good but unfortunatelly i'm not expert so dunno
I'm really interested if it works this way for you as i have a VF-uk one, and once i have to go back to stock this info would be really helpful.
Please let we know your progress
Good luck
Click to expand...
Click to collapse
Hey,
Yup this worked perfectly (almost). Reset your CID to your originally carriers before running the nandroid backup or it will be missing your carriers boot screen.
The only thing is the recovery seems to be missing. I'd expect the HTC recovery to load when selecting it from the bootloader but all I get is a red triangle. I obviously need to sort this before sending it back (Monday).
Any ideas?
I haven't s-on'd yet because I want to sort out recovery first. That should be pretty simple though.
I guess I just need a link to stock recovery.img.
Just tried and mine does same. I have stock recovery so thats fine.
Hope you get a nice new one:laugh:
Cheers
Stock recovery will display a red triangle..your all set
Sent from my HTC One using xda app-developers app
Yup. I just realised. Completely 100% back to stock now with s-on.
It's been quite a journey. Hopefully they can repair it quickly so I can get ARHD 11 back on.
Ardmanz said:
Yup. I just realised. Completely 100% back to stock now with s-on.
It's been quite a journey. Hopefully they can repair it quickly so I can get ARHD 11 back on.
Click to expand...
Click to collapse
Ardmanz said:
Yup. I just realised. Completely 100% back to stock now with s-on.
It's been quite a journey. Hopefully they can repair it quickly so I can get ARHD 11 back on.
Click to expand...
Click to collapse
Would you make the step by step?
It would really helpful
If I ain't wrong,
1. Get the RUU's
2. Change CID to HTC_001 before flashing RUU
3. Flash RUU
4. Write original CID
5. Nandroid Restore
6. Re S-ON with Revone
Is that right?
Grand_Goblin said:
Would you make the step by step?
It would really helpful
If I ain't wrong,
1. Get the RUU's
2. Change CID to HTC_001 before flashing RUU
3. Flash RUU
4. Write original CID
5. Nandroid Restore
6. Re S-ON with Revone
Is that right?
Click to expand...
Click to collapse
Yup, those are the exact steps that I took.
Note* make sure you just boot into custom recovery and don't actually flash it when restoring your nandroid backup. Having custom recovery on your device is a dead give away.
Grand_Goblin said:
Would you make the step by step?
It would really helpful
If I ain't wrong,
1. Get the RUU's
2. Change CID to HTC_001 before flashing RUU
3. Flash RUU
4. Write original CID
5. Nandroid Restore
6. Re S-ON with Revone
Is that right?
Click to expand...
Click to collapse
Ardmanz said:
Yup, those are the exact steps that I took.
Note* make sure you just boot into custom recovery and don't actually flash it when restoring your nandroid backup. Having custom recovery on your device is a dead give away.
Click to expand...
Click to collapse
sorry man, but "flash it" refers to?
I don't get it and I don't wanna mess up
Grand_Goblin said:
sorry man, but "flash it" refers to?
I don't get it and I don't wanna mess up
Click to expand...
Click to collapse
Normally you would use the following command to install custom recovery:
Code:
fastboot flash recovery recovery.img
Use this command instead:
Code:
fastboot boot recovery.img
That allows you to boot into custom recovery without actually installing it onto your phone.
Ardmanz said:
Normally you would use the following command to install custom recovery:
Code:
fastboot flash recovery recovery.img
Use this command instead:
Code:
fastboot boot recovery.img
That allows you to boot into custom recovery without actually installing it onto your phone.
Click to expand...
Click to collapse
matursuwun - Thank You so much! (in Javanese)
Hi,
I unlocked and rooted my HTC one about a month ago, used CWM recovery.
Today I Got an OTA update now and couldn't install it. Decided to relock and flash factory RUU.
checked my version, it was 1.27.206.1.
Downloaded the file:
OTA_M7_UL_JB_50_O2_UK_1.29.206.11-1.27.206.1_P_release_315484_signed9p2n1xhj0mbk0nvf.zip
When tried flashing got this error:
12 signature verify fail (during fastboot)
I don't know what to do anymore, i really want this update to 4.2.2, and don't really want a custom ROM.
If there's a way to install the OTA update without flashing factury RUU please lemme know,
otherwise if you know how to fix this verify error, please help.
Thanks,
Y.
This is not an RUU.. Its an OTA file.... Download the correct RUU and flash
Sent from my HTC One using xda premium
link?
mathrania said:
This is not an RUU.. Its an OTA file.... Download the correct RUU and flash
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
could i have the link please?
for example
will this file work?
M7 CWM Nandroid Backup / CID O2__102 / 1.27.206.1 (O2 Germany - Thanks to Laberistkus (Android-Hilfe member))
it says germany,,, i dunno. Also, once i install it, will it wipe my data? and would i be able to install the OTA update then?
Thanks
which version? bugging out here...
hey,
which of these will do?
RUU ZIP:
PN07IMG_M7C_DUG_JB_50_HTCCN_CHS_CU_1.12.1402.1_Rad io_1237.17.18.0423_release_318980_signed.zip
PN07IMG_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.16. zip
RUU_M7_U_JB_50_hTC_Asia_WWE_1.29.707.4_R_Radio_4A. 14.3250.13_10.33.1150.01_release_312087_signed_2_4 .zip
PN07IMG_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.3.z ip
RUU_PN07IMG_M7_U_JB_50_hTC_Asia_TW_1.29.709.4.zip
-----
Decrypted RUU's:
RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.3_ROM_D ecrypted.zip (Developer Edition - Thanks to Matt95)
PN07IMG_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.3 - Decrypted.zip (Developer Edition - Decrypted RUU - Thanks to scrosler)
RUU_M7_UL_JB_50_Cingular - 1.26.502.12 - Decrypted.zip (AT&T - Decrypted RUU - Thanks to scrosler)
abuanthar said:
will this file work?
M7 CWM Nandroid Backup / CID O2__102 / 1.27.206.1 (O2 Germany - Thanks to Laberistkus (Android-Hilfe member))
it says germany,,, i dunno. Also, once i install it, will it wipe my data? and would i be able to install the OTA update then?
Thanks
Click to expand...
Click to collapse
If it matches your cid.. Then yes
Sent from my HTC One using xda premium
---------- Post added at 03:13 PM ---------- Previous post was at 03:12 PM ----------
abuanthar said:
hey,
which of these will do?
RUU ZIP:
PN07IMG_M7C_DUG_JB_50_HTCCN_CHS_CU_1.12.1402.1_Rad io_1237.17.18.0423_release_318980_signed.zip
PN07IMG_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.16. zip
RUU_M7_U_JB_50_hTC_Asia_WWE_1.29.707.4_R_Radio_4A. 14.3250.13_10.33.1150.01_release_312087_signed_2_4 .zip
PN07IMG_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.3.z ip
RUU_PN07IMG_M7_U_JB_50_hTC_Asia_TW_1.29.709.4.zip
-----
Decrypted RUU's:
RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.3_ROM_D ecrypted.zip (Developer Edition - Thanks to Matt95)
PN07IMG_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.3 - Decrypted.zip (Developer Edition - Decrypted RUU - Thanks to scrosler)
RUU_M7_UL_JB_50_Cingular - 1.26.502.12 - Decrypted.zip (AT&T - Decrypted RUU - Thanks to scrosler)
Click to expand...
Click to collapse
None of these
Sent from my HTC One using xda premium
CID
mine is 02__01
is there anything i can do about it?
what do i need to check to know if the ruu is good for me? just the CID?
anything else?
and will i be able to install OTA updates once i do that?
Thanks!
read this post: http://forum.xda-developers.com/showthread.php?t=2370146 (amazing what a quick google search can do)
maybe nicely ask the 'gandalf' guy by pm to send you a link to a O2 UK nandroid he has..
thanks
yeah i saw this, thanks a lot -
but won't it erase all my data?
abuanthar said:
yeah i saw this, thanks a lot -
but won't it erase all my data?
Click to expand...
Click to collapse
It would
Sent from my HTC One using xda premium
abuanthar said:
Hi,
I unlocked and rooted my HTC one about a month ago, used CWM recovery.
Today I Got an OTA update now and couldn't install it. Decided to relock and flash factory RUU.
checked my version, it was 1.27.206.1.
Downloaded the file:
OTA_M7_UL_JB_50_O2_UK_1.29.206.11-1.27.206.1_P_release_315484_signed9p2n1xhj0mbk0nvf.zip
When tried flashing got this error:
12 signature verify fail (during fastboot)
I don't know what to do anymore, i really want this update to 4.2.2, and don't really want a custom ROM.
If there's a way to install the OTA update without flashing factury RUU please lemme know,
otherwise if you know how to fix this verify error, please help.
Thanks,
Y.
Click to expand...
Click to collapse
Also, you can't flash an OTA with a custom recovery....
hi im looking to go back to stock with my htc one virgin mobile but i have no clue what im doing sorry can Someone help me please if you need info please PM me many thanks
Hi GearshiftJB,
If you have S-OFF you can use the following guide to help you return to stock - [GUIDE] How to Return to 100% Stock.
If, however, you're S-ON then the method I'd use it to download and flash a stock ROM. If you use this method, you should still have root access but if you want to remove root access aswell then you can un-root your phone through the SuperSU app.
I hope this helps and if you need any more help/information, just let me know
Sent from my HTC One using XDA Premium 4 mobile app
Thank you very much! I will try this out later tonight when I am home again and will PM you if anything!
GearshiftJB said:
will PM you if anything!
Click to expand...
Click to collapse
Just post here.
hey guys, at this part
Phone should boot to the bootloader. Now run:
Code:
fastboot oem writecid CWS__001
Now verify that the stock CID shows on the bootloader screen by running:
Code:
fastboot reboot-bootloader
Should I use CWS_001 or is there a different code for the bellévirgin mobile people like me thanks for the help so far
okay so now I keep getting invalid CID whenever I try to change it to anything
okay I've been trying for hours I can't seem to find the proper RUU or Stock Virgin Recovery image
my CID is currently 11111111 where for bell/virgin it should be BM___001 right?
my HBOOT is at 1.55.0000
radio is 4A.20.3263.16
OS - 3.23.666.1
currently unlocked + S-off
BenPope said:
Just post here.
Click to expand...
Click to collapse
I have been but haven't been getting any response
bump - Still need help please.
My bootloader is unlocked, cid still supercid, hboot 1.55.0000, OS 3.23.666.1 but I'm still running Android Revolution??
I have not been able to find a stock bell/virgin ROM to flash in recovery .. I have no idea what I'm doing.
GearshiftJB said:
bump - Still need help please.
My bootloader is unlocked, cid still supercid, hboot 1.55.0000, OS 3.23.666.1 but I'm still running Android Revolution??
I have not been able to find a stock bell/virgin ROM to flash in recovery .. I have no idea what I'm doing.
Click to expand...
Click to collapse
Not being mean but if you have no idea why did you go the custom route? Why did't you check out how to restore to stock for this very situation?
You should be able to find a nandroid backup from someone and use this to restore the phone
EddyOS said:
Not being mean but if you have no idea why did you go the custom route? Why did't you check out how to restore to stock for this very situation?
You should be able to find a nandroid backup from someone and use this to restore the phone
Click to expand...
Click to collapse
I'm trying to restore via CWM using.. http://www.htc1guru.com/dld/m7-cwm-nandroid-backup-cid-bm___001-1-29-666-5-zip/ that for Bell.
I can't seem to find where to put the backup once it's downloaded though..
Why did I go the custom route? I was curious. I originally had thought that it would be easy to restore if I just backed up what I originally had.. but that backup got lost and I'm just not up to date with how to do any of this. Thanks for the reply!
GearshiftJB said:
I'm trying to restore via CWM using.. http://www.htc1guru.com/dld/m7-cwm-nandroid-backup-cid-bm___001-1-29-666-5-zip/ that for Bell.
I can't seem to find where to put the backup once it's downloaded though..
Why did I go the custom route? I was curious. I originally had thought that it would be easy to restore if I just backed up what I originally had.. but that backup got lost and I'm just not up to date with how to do any of this. Thanks for the reply!
Click to expand...
Click to collapse
Therein lies the problem - assumption. You should always read up on everything you can so you know what you can/can't do with your particular handset.
You have to put the backup in the relevant folder on your phone so that the recovery can see the backup, e.g. /data/media/clockworkmod/backups/
EddyOS said:
Therein lies the problem - assumption. You should always read up on everything you can so you know what you can/can't do with your particular handset.
You have to put the backup in the relevant folder on your phone so that the recovery can see the backup, e.g. /data/media/clockworkmod/backups/
Click to expand...
Click to collapse
okay.
anyways I just finished the download, put it in the clockwork mod folder/backup and will try to restore/back up from it now.
in order to have stock OTA updates will I have to go back to S-on, lock bootloader and normal cid? also my Hboot is 1.55.0000 does this require a downgrade? thanks! I'm making progress!
When I use CWM to try and restore I cant locate the file. It says cant mount /external_sd or cant mount /sdcard
I'll thoroughly search for where the back up I'm creating now is stored
GearshiftJB said:
okay.
anyways I just finished the download, put it in the clockwork mod folder/backup and will try to restore/back up from it now.
in order to have stock OTA updates will I have to go back to S-on, lock bootloader and normal cid? also my Hboot is 1.55.0000 does this require a downgrade? thanks! I'm making progress!
Click to expand...
Click to collapse
OTA have worked fine with S-OFF for me, and with the unlocked bootloader
EddyOS said:
OTA have worked fine with S-OFF for me, and with the unlocked bootloader
Click to expand...
Click to collapse
good to know!
I can't seem to get CWM to find the nandroid backup that I downloaded though. I couldn't find the ones I made via my computer either?
GearshiftJB said:
good to know!
I can't seem to get CWM to find the nandroid backup that I downloaded though. I couldn't find the ones I made via my computer either?
Click to expand...
Click to collapse
Probably cause CWM looks for them in /data/media/clockworkmod/backups
and your PC looks at /data/media/0/... (ie /sdcard/ as of Android 4.2.2)
Sent from my HTC One using xda app-developers app
nkk71 said:
Probably cause CWM looks for them in /data/media/clockworkmod/backups
and your PC looks at /data/media/0/... (ie /sdcard/ as of Android 4.2.2)
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Thank you. I relized I had to set root access for ES file manager. I'm about to try to restore the backup now that I put it in data/media..
so i flashed the nandroid backup for bell found here http://forum.xda-developers.com/showthread.php?t=2428276
and i seem to have lost touch screen capabilities ..
GearshiftJB said:
so i flashed the nandroid backup for bell found here http://forum.xda-developers.com/showthread.php?t=2428276
and i seem to have lost touch screen capabilities ..
Click to expand...
Click to collapse
Use an OTG to connect a mouse, and download the OTA, that will fix the touchscreen.
Sent from my HTC One using xda app-developers app
Hey Guys! Sorry to bother you! Can u provide Direct link To HTC One M7 Latest RUU File Asia/India ?? There are lots of RUU's which is why i'm confused! Thank You
J.K said:
Hey Guys! Sorry to bother you! Can u provide Direct link To HTC One M7 Latest RUU File Asia/India ?? There are lots of RUU's which is why i'm confused! Thank You
Click to expand...
Click to collapse
How are we supposed to known which one you need if you are not giving any information about your phone?
Post the output of "fastboot getvar all" (except imei and serialno) and we will be able to tell you if there is a ruu for your phone
alray said:
How are we supposed to known which one you need if you are not giving any information about your phone?
Post the output of "fastboot getvar all" (except imei and serialno) and we will be able to tell you if there is a ruu for your phone
Click to expand...
Click to collapse
I don't have the phone! I downloaded ASIA/INDIA version which took 4hrs! Later i came to know it wasn't RUU file :'( Any other ways to know ? It's International version with Unlocked It was Running 4.4.3 And Do i need to S-OFF to Use RUU's?
J.K said:
I don't have the phone! I downloaded ASIA/INDIA version which took 4hrs! Later i came to know it wasn't RUU file :'( Any other ways to know ? It's International version with Unlocked It was Running 4.4.3
Click to expand...
Click to collapse
we need to know:
your CID
your MID
What version number is currently installed on the phone
s-on or s-off
locked or unlocked bootloader
all these info are included in a "fastboot getvar all" except the bootloader status (locked or unlocked)
And Do i need to S-OFF to Use RUU's?
Click to expand...
Click to collapse
it all depend the output of "fastboot getvar all" but if the phone was on 4.4.3, yes you'll probably need s-off. There might be alternatives that doesnt require s-off (stock odexed rom, reset rom, nandroid backup....)
waiting for your fastboot getvar all
alray said:
we need to know:
your CID
your MID
What version number is currently installed on the phone
s-on or s-off
locked or unlocked bootloader
all these info are included in a "fastboot getvar all" except the bootloader status (locked or unlocked)
it all depend the output of "fastboot getvar all" but if the phone was on 4.4.3, yes you'll probably need s-off. There might be alternatives that doesnt require s-off (stock odexed rom, reset rom, nandroid backup....)
waiting for your fastboot getvar all
Click to expand...
Click to collapse
I unlocked My Bootloader to Use Paranoid Android!! Any other way download the file ? Coz i won't have much time to Download 2mr when i get the phone! Coz My internet is not even 1Mbps
J.K said:
I unlocked My Bootloader to Use Paranoid Android!! Any other way download the file ? Coz i won't have much time to Download 2mr when i get the phone! Coz My internet is not even 1Mbps
Click to expand...
Click to collapse
Bootloader is UNLOCKED with S-ON N Currently its running CM 11 M12
J.K said:
Bootloader is UNLOCKED with S-ON N Currently its running CM 11 M12
Click to expand...
Click to collapse
still need to know:
your CID
your MID
What version number is currently installed on the phone
s-on or s-off ---> s-on
locked or unlocked bootloader --> unlocked
The fact that your phone is currently running CM11 is irrelevant for finding the right ruu. We need to know what firmware version is on your phone (example: 5.12.707.104)
alray said:
still need to know:
your CID
your MID
What version number is currently installed on the phone
s-on or s-off ---> s-on
locked or unlocked bootloader --> unlocked
The fact that your phone is currently running CM11 is irrelevant for finding the right ruu. We need to know what firmware version is on your phone (example: 5.12.707.104)
Click to expand...
Click to collapse
How do i know that ? When i no longer have Stock ROM ? Or Phone ? Will flashing Diffrerent RUU may brick my device ?
J.K said:
How do i know that ? When i no longer have Stock ROM ?
Click to expand...
Click to collapse
by using fastboot: "fastboot getvar all"
Or Phone?
Click to expand...
Click to collapse
Obviously, you can't have these info if you don't have the phone in your possession.
Will flashing Diffrerent RUU may brick my device ?]
Click to expand...
Click to collapse
No, s-on will prevent you flashing the wrong RUU. Anyway I'm 99% sure there will be no RUU availabe for you phone. WIth s-on you can only flash RUU that are same or higher version then what was on the phone before. There is no 4.4.3 RUU except for t-mobile which is not your version.
So unless you achieve s-off, you will not be able to use a ruu.
But there might be some others alternatives to bring your phone back to stock like a reset rom, stock odexed rom or a nanadroid backup,
Unfortunately, if you can't tell me more on your device (CID/MID and firmware version). I can't help you more and I cant point you the stock rom, reset rom or nandroid backup you need.
alray said:
still need to know:
your CID
your MID
What version number is currently installed on the phone
s-on or s-off ---> s-on
locked or unlocked bootloader --> unlocked
The fact that your phone is currently running CM11 is irrelevant for finding the right ruu. We need to know what firmware version is on your phone (example: 5.12.707.104)
Click to expand...
Click to collapse
alray said:
by using fastboot: "fastboot getvar all"
Obviously, you can't have these info if you don't have the phone in your possession.
No, s-on will prevent you flashing the wrong RUU. Anyway I'm 99% sure there will be no RUU availabe for you phone. WIth s-on you can only flash RUU that are same or higher version then what was on the phone before. There is no 4.4.3 RUU except for t-mobile which is not your version.
So unless you achieve s-off, you will not be able to use a ruu.
But there might be some others alternatives to bring your phone back to stock like a reset rom, stock odexed rom or a nanadroid backup,
Unfortunately, if you can't tell me more on your device (CID/MID and firmware version). I can't help you more.
Click to expand...
Click to collapse
Let me explain you each And everything! 2mr the new owner is going to show up (Coz i sold My One) He asked that he'll give me his phone so that he can get OTA's And he prefer stock rom over CM... I asked him to bring up his phone 2mr! He may come N wait for the phone to get it back as it was before! So is there any way u could tell me which will work to get to stock i'll download the file Or RUU whole night N flash it back when i get the phone Coz i can't download 2mr it'll take 4hrs to download 1GB!! I downloaded on ZIP which ended up being Flashable Zip! (Guru_Reset_M7_3.63.707.4) If i flash that ZIP using CWM ... Will i able to get OTA ?
J.K said:
Let me explain you each And everything! 2mr the new owner is going to show up (Coz i sold My One) He asked that he'll give me his phone so that he can get OTA's And he prefer stock rom over CM... I asked him to bring up his phone 2mr! He may come N wait for the phone to get it back as it was before! So is there any way u could tell me which will work to get to stock i'll download the file Or RUU whole night N flash it back when i get the phone Coz i can't download 2mr it'll take 4hrs to download 1GB!! I downloaded on ZIP which ended up being Flashable Zip! (Guru_Reset_M7_3.63.707.4) If i flash that ZIP using CWM ... Will i able to get OTA ?
Click to expand...
Click to collapse
If that phone was s-on and on stock 4.4.3 before, it should be on hboot 1.57 which mean you'll need to use a 6.xx.707.xx stock rom/reset rom/nandroid backup. Not even sure if you'll need a .707 version.
There is a 5.xx.707.x reset rom in the general section. Maybe it could be that one, maybe not, but you could download that one so you'll be ready tomorrow.
alray said:
If that phone was s-on and on stock 4.4.3 before, it should be on hboot 1.57 which mean you'll need to use a 6.xx.707.xx stock rom/reset rom/nandroid backup. Not even sure if you'll need a .707 version.
There is a 5.xx.707.x reset rom in the general section. Maybe it could be that one, maybe not, but you could download that one so you'll be ready tomorrow.
Click to expand...
Click to collapse
Is that RUU ? Or Flashable ZIP ? Coz he want get OTA
btw maybe you could ask the owner to send you the output of "fastboot getvar all" so you could be ready for tomorrow...
---------- Post added at 03:19 PM ---------- Previous post was at 03:18 PM ----------
J.K said:
Is that RUU ? Or Flashable ZIP ? Coz he want get OTA
Click to expand...
Click to collapse
its a flashable zip with the aroma installer. Its a stock rom and stock recovery and radio are included which mean you are supposed to be able to flash ota after flashing this zip.
alray said:
btw maybe you could ask the owner to send you the output of "fastboot getvar all" so you could be ready for tomorrow...
---------- Post added at 03:19 PM ---------- Previous post was at 03:18 PM ----------
its a flashable zip with the aroma installer. Its a stock rom and stock recovery and radio are included which mean you are supposed to be able to flash ota after flashing this zip.
Click to expand...
Click to collapse
It's not about Flashing OTA!! Will he receive OTA ? Directly thru the phone ?
J.K said:
It's not about Flashing OTA!! Will he receive OTA ? Directly thru the phone ?
Click to expand...
Click to collapse
its a stock rom so yes. He will be prompted to download and install the ota normally.
But if the phone firmware (x.xx.xxx.x) doesnt match that rom version (5.12.707.104), the ota installation might fail.
alray said:
its a stock rom so yes. He will be prompted to download and install the ota normally.
But if the phone firmware (x.xx.xxx.x) doesnt match that rom version (5.12.707.104), the ota installation might fail.
Click to expand...
Click to collapse
Okay!! Will that Flashable ZIP Works ? What's the worst case scenario ? I can't ask the owner Coz he's n00b!!
wait
I found another reset rom, its a 6.13.707.106 version which is the latest version I think. https://www.androidfilehost.com/?fid=95784891001611719
so tomorrow, check the getvar all, if the version main is 6.13.707.106 then flash the zip linked above
if the version main is 5.12.707.104, flash this one: https://www.androidfilehost.com/?fid=23578570567720676
in both cases, when flashing the zip, you'll be prompted to install stock recovery, stock radio and root. Say yes to install stock recovery and radio but say no for root.
btw, give yatindroid a thanks for these roms in his thread: http://forum.xda-developers.com/htc-one/general/stock-rom-reset-t2802061
J.K said:
Okay!! Will that Flashable ZIP Works ?
Click to expand...
Click to collapse
Yes they are often used by many ppl here. Flash it using a custom recovery, no needs to relock the bootloader, once flashed, the custom recovery will be overwritten by the stock recovery so he will be able to install future ota updates.
What's the worst case scenario ?
Click to expand...
Click to collapse
the version-main doesn't match the 2 reset roms linked above.