[Q] PLEASE HELP!!!Captivate keeps restarting - Captivate Q&A, Help & Troubleshooting

here is the thing
i use the odin to install this : I897UCJF6-final-OCD-REV0
and my captivate is 2.1
the process was successful but when it came to my phone...it just keeps restarting the at&t logo all the time!!!!!
I plug my phone into PC,the screen changes to battery and I press many combinations of buttons,,both computer and phone
do not react at all!!! now i cannot get into downloading mode and odin cannot recognize my phone.
any one who can help me???

ybwbqg9379 said:
here is the thing
i use the odin to install this : I897UCJF6-final-OCD-REV0
and my captivate is 2.1
the process was successful but when it came to my phone...it just keeps restarting the at&t logo all the time!!!!!
I plug my phone into PC,the screen changes to battery and I press many combinations of buttons,,both computer and phone
do not react at all!!! now i cannot get into downloading mode and odin cannot recognize my phone.
any one who can help me???
Click to expand...
Click to collapse
please help!!!!!

Here is a thread that may help ya get into Download mode... http://forum.xda-developers.com/showpost.php?p=33227541&postcount=1.
If that thread doesn't help, then u will need a Jig to get ya into download mode. And once there, i would suggest flashin to KK4 GB 2.3.5 here... http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3.
Sent from my SAMSUNG-SGH-I747 using xda premium

4-2ndtwin said:
Here is a thread that may help ya get into Download mode... http://forum.xda-developers.com/showpost.php?p=33227541&postcount=1.
If that thread doesn't help, then u will need a Jig to get ya into download mode. And once there, i would suggest flashin to KK4 GB 2.3.5 here... http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
thank you so so so much!

Related

Help pls: My fone doesnt open after firmware upgrade

Pls can anyone help me im sooooo desperate. i just upgraded my fone via kies but after upgrade my fone is now blank, i cant use it anymore. pls hell. did i brick my fone??? can i bring it to life again??
You should try to reinstall the stock firmware. First see if you can get into download mode. Two ways, while your phone is off, hold down volume, the home button, and power button together till you get a yellow sign that has a digging android. If that don't work, other way is to take battery out, hold down volume, home button, and power together and reinsert the battery. Once you get to that stage, use Odin to reinstall your firmware.
Sent from my GT-I9000 using XDA App
sfms said:
You should try to reinstall the stock firmware. First see if you can get into download mode. Two ways, while your phone is off, hold down volume, the home button, and power button together till you get a yellow sign that has a digging android. If that don't work, other way is to take battery out, hold down volume, home button, and power together and reinsert the battery. Once you get to that stage, use Odin to reinstall your firmware.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
shud all my apps be restored?? or back to square 1?
Well seeing as though you updated via kies, all your apps are deleted. I would just start fresh and back to stock. After that I would install a custom rom from the forums here, in my opinion, these rom makers do a great job making Roms that will make your phone be a phone and more
Sent from my GT-I9000 using XDA App
sfms said:
Well seeing as though you updated via kies, all your apps are deleted. I would just start fresh and back to stock. After that I would install a custom rom from the forums here, in my opinion, these rom makers do a great job making Roms that will make your phone be a phone and more
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
so did i really bricked my fone then? if i send my fone to samsung do u think it will void my warranty?
if im back to square one, can i upgrade to froyo 2.2?
i will tell them what really happened that ive upgraded my firmware via kies then my fone did not boot up.
That will work ;-)
Sent from my GT-I9000 using XDA App
I wouldn't really say you bricked your phone. If you can get into download mode you are clear and your phone can come back to life. Just so you know.
Sent from my GT-I9000 using XDA App
sfms said:
I wouldn't really say you bricked your phone. If you can get into download mode you are clear and your phone can come back to life. Just so you know.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
i tried doing the download mode but i cant get to that
Two choices return phone to Samsung saying broke under Kies update .
Or use recovery jig and flash stock firmware this is an unofficial method that will invalidate your warranty .
jje
sfms said:
You should try to reinstall the stock firmware. First see if you can get into download mode. Two ways, while your phone is off, hold down volume, the home button, and power button together till you get a yellow sign that has a digging android. If that don't work, other way is to take battery out, hold down volume, home button, and power together and reinsert the battery. Once you get to that stage, use Odin to reinstall your firmware.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
\hey i got the yellow sign digging whats next???
JJEgan said:
Two choices return phone to Samsung saying broke under Kies update .
Or use recovery jig and flash stock firmware this is an unofficial method that will invalidate your warranty .
jje
Click to expand...
Click to collapse
i got the yellow sign digging what,s next??
softpinkishlips said:
i got the yellow sign digging what,s next??
Click to expand...
Click to collapse
Flash stock firmware for your phone via Odin .
http://forum.xda-developers.com/showthread.php?t=882014
jje
JJEgan said:
Flash stock firmware for your phone via Odin .
http://forum.xda-developers.com/showthread.php?t=882014
jje
Click to expand...
Click to collapse
i got the yellow digging but my fone is not connected to my pc. i turned it off again. so should i connect my fone via usb to my pc? then press again the 3 bttons?
Sorry went to bed, just woke up. Anyways download the stock firmware for your phone. Make sure you download the right one. Meaning if you have the i9000M, download i9000M, or if you have i9000T, download i9000T. If you check behind your battery you'll.find your model. I don't think it really matters, I mean your just gonna flash another rom once your phone is back to life for sure. ;-)
Sent from my GT-I9000 using XDA App
Odin will detect your phone if your phone is in download mode.
Sent from my GT-I9000 using XDA App
sfms said:
Odin will detect your phone if your phone is in download mode.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
ok i have a few questions: after flashing my fone will all my apps be restored or ill be back to square 1? what is flashing means? if this did not happen to me, is flashing still needed?
softpinkishlips said:
ok i have a few questions: after flashing my fone will all my apps be restored or ill be back to square 1? what is flashing means? if this did not happen to me, is flashing still needed?
Click to expand...
Click to collapse
what odin will i use? there are 3
im here now. it says: cant mount / dev/block/stl10 invalid argument
ex. copy dbdate media: cant mount DBdata
your storage is not prepared yet. pls use UI menu for format and reboot actions
copy default media content failed

Continuum v5.1, v5.2 got big trouble

Hi Experts,
I have a Cappy and i love Continuum 5 ROM. I never miss any versions from beta2 to RC 3, everything is ok, but now when contimuum v5.1 was released. I tried to flash it but i got a big problem in that version. The first, i encountered Boot Loop issue while booting, but it's not the biggest problem, my cappy is still boot up to the home screen, and here everything was became very bad. My Cappy got lag and cant interact with return and it reboot automatic after that.
Now, when v5.1 was released, i believed it'll be fixed, but it's still exists. .
my cappy cant boot up to home screen. it repeats booting to continuum animation and restart forever.
can anybody give me a suggestion for turning my cappy back !!!!!!!! Please help
Did you have full battery? I made this mistake too... Be sure that you did everything correctly..
Sent from my captivate using XDA App
I would suspect you could simply use the 1-CLICK ODIN program to restore the phone then follow the steps carefully for 5.1 (which is a pretty awesome ROM btw)
I'm sure i charged full battery before flashing.
ProBoner said:
I would suspect you could simply use the 1-CLICK ODIN program to restore the phone then follow the steps carefully for 5.1 (which is a pretty awesome ROM btw)
Click to expand...
Click to collapse
i flashed to stock room with odin3 1.7 (using PDA + PIT files. i did that successful many times with 2.2 ). but now, with 2.3.3 i got brick( maybe lost boot), although flashed by odin without any errors ( 1 succeed/ failed 0) .
now i cant make the cappy go to download mode. please helppppp.
3 buttons with no interaction !!
sounds like u flashed a stock rom that didnt have old bootloader, safe way to have done it is with non 3 button fix odinoneclick flash to stock. dunno if a JIG will help u get back into download mode
CremeFraiche said:
sounds like u flashed a stock rom that didnt have old bootloader, safe way to have done it is with non 3 button fix odinoneclick flash to stock. dunno if a JIG will help u get back into download mode
Click to expand...
Click to collapse
Really, can i get back by using JIG ? My cappy cant boot up anymore. still pess power button but nothing was display.
longdct said:
Really, can i get back by using JIG ? My cappy cant boot up anymore. still pess power button but nothing was display.
Click to expand...
Click to collapse
You do know that download mode volume down and power, or volume down and usb connection? Figure might as well say cause I had what looked to be black screen before, but went in download mode. And can you not odin one click?
Ps. I have had stay black till reboot but if it give com port even with black screen it is in download mode
Sent from my GT-I9000 using XDA Premium App
leezrd said:
You do know that download mode volume down and power, or volume down and usb connection? Figure might as well say cause I had what looked to be black screen before, but went in download mode. And can you not odin one click?
Ps. I have had stay black till reboot but if it give com port even with black screen it is in download mode
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Thanks Leezrd, i tried these methods but nothing was happened. the Odin3 cant recognize any com port
longdct said:
Thanks Leezrd, i tried these methods but nothing was happened. the Odin3 cant recognize any com port
Click to expand...
Click to collapse
Have you tried odin one click I heard that if odin 3 doesn't work odin one click will
Sent from my GT-I9000 using XDA Premium App
leezrd said:
Have you tried odin one click I heard that if odin 3 doesn't work odin one click will
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
I wish i have a chance to do this. but now i cant go to download mode. it makes me so sad.
longdct said:
I wish i have a chance to do this. but now i cant go to download mode. it makes me so sad.
Click to expand...
Click to collapse
Get a jig and use it to get into DL mode. Please make 100% sure you know what you are doing before you flash.
longdct said:
I wish i have a chance to do this. but now i cant go to download mode. it makes me so sad.
Click to expand...
Click to collapse
Use command command prompt. "/android" Then "adb shell" then "su" then "roboot download" might not work with adb but could give it a try
Sent from my GT-I9000 using XDA Premium App
zelendel said:
Get a jig and use it to get into DL mode. Please make 100% sure you know what you are doing before you flash.
Click to expand...
Click to collapse
thanks for your help. if it really lost bootloader, JIG has any effect? if terrible thing is true. can u tell me how i can do to relive my phone ?
longdct said:
thanks for your help. if it really lost bootloader, JIG has any effect? if terrible thing is true. can u tell me how i can do to relive my phone ?
Click to expand...
Click to collapse
Your best bet is the jig. If that doesnt work then I would try and get a warrenty replacment. I went over the thread and it stated that if you get a bootloop you should boot into recovery and reflash the rom, did you do that?
longdct said:
thanks for your help. if it really lost bootloader, JIG has any effect? if terrible thing is true. can u tell me how i can do to relive my phone ?
Click to expand...
Click to collapse
If you lost bootloader then you will have to JTAG, if your under warranty you can say you were updating to froyo and it turned off and never turned back on
Sent from my GT-I9000 using XDA Premium App
zelendel said:
Your best bet is the jig. If that doesnt work then I would try and get a warrenty replacment. I went over the thread and it stated that if you get a bootloop you should boot into recovery and reflash the rom, did you do that?
Click to expand...
Click to collapse
he can't get a turn on so probably not able to get in recovery but to OP with gb recovery is volume up and power
Sent from my GT-I9000 using XDA Premium App
i was having some issues gettin my captivate into download mode using odin to go back to stock also. what worked for me however was to have usb plugged into comp and phone and THEN hold volume up and down. port was then recognized and i went to download. badda bing badda boom.
zelendel said:
Your best bet is the jig. If that doesnt work then I would try and get a warrenty replacment. I went over the thread and it stated that if you get a bootloop you should boot into recovery and reflash the rom, did you do that?
Click to expand...
Click to collapse
right. i got a bootloop when flash to v5.2. i tried to flash the rom in recovery mode many times, but it's still exists. even i flash back to RC3. i got only the android text animation on the screen.
thus i have to flash to the stock by that way. and now i got a brick
I've had problems in the past with getting to download mode on the cappy. I did some googling trying to find a way, ended up finding a very good page on it:
http://samsungcaptivate.wikia.com/wiki/Putting_the_Phone_into_Download_Mode
I hope that helps.
Had the same problem with my cappy. The problem is that after all you did, you have one bootloader from i9000 and another from i897. The jig won`t help. I`ve found the people that recovered the phone with JTAG.

help Captivate "Firmware upgrade fail"

was updated with Odin and get this message on the screen
Firmware Upgrade Fail !
Try using recovery mode
as the image of last post
says in that thread that is solved so
I do not understand
The phone-!-computer is a download mode, so if you can get to that, you should just Odin 1-click back to stock KK2 (get one with CWM) and reflash Illuminance.
Click to expand...
Click to collapse
please help
I'm desperate and I am new to this
please help me
I like helping people when new issues come up, not old ones, use the search button before making a new thread... You will find your answers in old threads
Sent from my SGH-i897 using xda premium
That screen IS download mode - it's just telling you it won't go any further than that.
Follow the steps for what you were trying to do before with Odin, and you should be able to fix it straight away.
Don't worry, this phone is almost unbrickable.
My phone is ubrickable.
Sent from my SGH-i897 using xda premium
Here ya go... LMGTFY
First link has the answer.
unplug phone, pull battery, reinsert battery, while holding both volume buttons insert usb cable, open odin, remove usb cable, connect usb cable to phone and pc, flash. thats the process. done it countless times with the screen you describe.
Just getting stuck with ODIN..
I continued with ODIN update after seeing this issue.. but somehow the screen is stuck at 'Set PIT File'. DO NOT TURN OFF TARGET. Does not seem to be going any further for 30 mins now..
the screen you are telling about is just like another version of download mode
first open odin one click then connect the device in download mode and click on start button you will get device running
Try leaving the battery out for like 5 minutes and/or use another odin 1 click
Sent from my SAMSUNG-SGH-I897 using XDA
My one also .. jig is not helping also .. please
^
This....as i posted earlier in this thread.
Here ya go... LMGTFY
First link has the answer.
For other Captivate to pc connection issues, download and recovery mode help...go here...http://forum.xda-developers.com/showthread.php?p=33227541
ebhathiya...stop double and triple posting. Help will come...as it has already.
Stop freakin out and search before posting and especially before opening new threads.
Plz and thx u :thumbup:
Sent from my SAMSUNG-SGH-I897 using xda premium
4-2ndtwin said:
^
This....as i posted earlier in this thread.
Here ya go... LMGTFY
First link has the answer.
For other Captivate to pc connection issues, download and recovery mode help...go here...http://forum.xda-developers.com/showthread.php?p=33227541
ebhathiya...stop double and triple posting. Help will come...as it has already.
Stop freakin out and search before posting and especially before opening new threads.
Plz and thx u :thumbup:
Sent from my SAMSUNG-SGH-I897 using xda premium
Click to expand...
Click to collapse
LOL This made my day :highfive:
try to use odin one click restore to stock rom

[Q] Desperate! Bricked SGS i9000m Bell

I attempted to root my SGS i9000m using odin, I put the phone into download mode and ran odin, it flashed some files and now my phone wont boot or enter recovery/download mode! It randomly shows AT&T World phone splash screen whenever i try to turn it on. That screen just keeps flashing and refuses to boot or be recognized by the computer. When I plug the phone into a USB cord it wont turn on at ALL.
Please, please don't tell me Im screwed!
Try and look into getting a USB JIG, which may get your phone booting into download mode and from there hopefully Odin detects it so you can flash
Yeah you flashed the wrong firmware on your phone.. u need a jig.. and next time READ!
Sent from my GT-I9000 using xda premium
Thanks, what's a jig? I did read, I just downloaded the wrong version of Odin and I did it late at night.. Not a good combination.
ZaySk said:
Thanks, what's a jig? I did read, I just downloaded the wrong version of Odin and I did it late at night.. Not a good combination.
Click to expand...
Click to collapse
Search the forums for a jig.. I think you can buy them on ebay .. or if your handy with a soldering gun you can make it yourself.
There is no wrong version of Odin.. you just downloaded the wrong firmware and flashed it before reading what phone it was for
Sent from my GT-I9000 using xda premium
Btw a jig is a device with an USB plug, that plugged in your phone switched off, the turn on, should put it in download mode.
Inviato dal mio GT-I9000 usando Tapatalk
Where are you located? Maybe someone near you has a jig.
Did you pull the battery out and then put it back in to see if you can get into download mode? That worked for me when I messed up my first root attempt.
if you can get into download mode.. you should be able to flash the correct firmware.. no jig needed...

[Q] Captivate soft bricked.

I need Help people, Understand my problem First,
1. I bought a new Samsung AT&T Captivate.
2. Upgraded to 2.3 Kies.
3. Used CornKernel_UCKK4_v705 to root my phone and flash CWM.
4. backed up my OS 2.3 using CWM,
5. Success fully installed STABLE CM 10.0.
6. Everything was great. Tried installing CM 10.1 and Gapps crashed everytime.
7. THEN i made the big Mistake, RESTORED 2.3 stock OS using CWM and it stuck at some point and battery drained.
8. Now my phone hangs at AT&T logo. and if try to enter download mode battery logo flashes.
9. I tried ODIN one click to unbrick to recover the stock OS and now i cant even get into DOWNLOAD mode.
Please Help friends i know u must have faced such situation, i NEED HELP. :crying:
Avikar said:
I need Help people, Understand my problem First,
1. I bought a new Samsung AT&T Captivate.
2. Upgraded to 2.3 Kies.
3. Used CornKernel_UCKK4_v705 to root my phone and flash CWM.
4. backed up my OS 2.3 using CWM,
5. Success fully installed STABLE CM 10.0.
6. Everything was great. Tried installing CM 10.1 and Gapps crashed everytime.
7. THEN i made the big Mistake, RESTORED 2.3 stock OS using CWM and it stuck at some point and battery drained.
8. Now my phone hangs at AT&T logo. and if try to enter download mode battery logo flashes.
9. I tried ODIN one click to unbrick to recover the stock OS and now i cant even get into DOWNLOAD mode.
Please Help friends i know u must have faced such situation, i NEED HELP. :crying:
Click to expand...
Click to collapse
Try holding volume up + volume down and then plug in the USB cord that is plugged into your PC. This should take you to download mode. If this doesn't help you will have to purchase a jig
n205des said:
Try holding volume up + volume down and then plug in the USB cord that is plugged into your PC. This should take you to download mode. If this doesn't help you will have to purchase a jig
Click to expand...
Click to collapse
Thanks for the quick reply,
Yeah i have ordered one, Jig is on the way but now what after coming to download mode? Odin disabled my download mode, What should i do now?
Avikar said:
Thanks for the quick reply,
Yeah i have ordered one, Jig is on the way but now what after coming to download mode? Odin disabled my download mode, What should i do now?
Click to expand...
Click to collapse
download this
http://www.mediafire.com/?sbjd049x4m36pb6
after downloading it run it as administrator
then connect the jig to the phone and then it will boot in download mode
then you caqn remove the jig and connect the usb cable to the pc
and you will see a yellow prompt like the one in odin..
and then click on start..
the stock rom flashing will start...
Dude why the hell "junior" written under ur name, U RECOVERED MY PHONE.
n205des said:
download this
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
after downloading it run it as administrator
then connect the jig to the phone and then it will boot in download mode
then you caqn remove the jig and connect the usb cable to the pc
and you will see a yellow prompt like the one in odin..
and then click on start..
the stock rom flashing will start...
Click to expand...
Click to collapse
tHANKS to the brain who developed this resistor thing, My phone moved to Download mode and then thanks to the person who gave me the link in the above comment,,
But now i cant flash CWM I flashed it earlier without any problem but now i cant and seriously after using JB 4.1 GB seems very bad,
Any ways a great great thanks my phone is breathing because of u.. High Five
Avikar said:
tHANKS to the brain who developed this resistor thing, My phone moved to Download mode and then thanks to the person who gave me the link in the above comment,,
But now i cant flash CWM I flashed it earlier without any problem but now i cant and seriously after using JB 4.1 GB seems very bad,
Any ways a great great thanks my phone is breathing because of u.. High Five
Click to expand...
Click to collapse
it already has CWM in it as it does not have the stock kernel..
it is based on boog's KI1/KI2 Kernel
but how to boot into cwm??
n205des said:
it already has CWM in it as it does not have the stock kernel..
it is based on boog's KI1/KI2 Kernel
Click to expand...
Click to collapse
I almost tried everything but can nt boot into cwm. what the combo for this kernel to boot into recovery?
Avikar,
This Stickied thread will prove helpful.... Captivate - PC Connection Issues, Download Mode and Recovery Mode Help
Sent from my SAMSUNG-SGH-I747 using xda premium
Avikar said:
I almost tried everything but can nt boot into cwm. what the combo for this kernel to boot into recovery?
Click to expand...
Click to collapse
volume+ volume- and power button is the combo for recovery..
Still not there.
n205des said:
volume+ volume- and power button is the combo for recovery..
Click to expand...
Click to collapse
I have recovered from a soft brick using a jig, I know these shortcuts very well but none is working even to come into a download mode i always need a Jig it was all good when i installed cm 10.0 the second day i bought this phone but now after the attempt to restore into stock ROM was a mess, then thanks to u my phone got a life again, but now even the CornKernel_UCKK4_v705 isn,t working on my phone,
Any IDEAS???
^
The KK4 Corn Kernel will only boot up and run if u r on KK4 firmware or a Rom of that base...or previous stock firmware/roms.
Sent from my SGH-I777 using xda premium
Avikar said:
I have recovered from a soft brick using a jig, I know these shortcuts very well but none is working even to come into a download mode i always need a Jig it was all good when i installed cm 10.0 the second day i bought this phone but now after the attempt to restore into stock ROM was a mess, then thanks to u my phone got a life again, but now even the CornKernel_UCKK4_v705 isn,t working on my phone,
Any IDEAS???
Click to expand...
Click to collapse
it does not boot in recovery,right?
have you tried through rom manager??
^
Rom manager does not work well with the Captivate.
Sent from my SGH-I777 using xda premium
4-2ndtwin said:
^
Rom manager does not work well with the Captivate.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
but it can help by booting into recovery without the three button combo.
Yes, to that. Thank u for clarifying. :thumbup:
Sent from my SGH-I777 using xda premium
Still nothing.
4-2ndtwin said:
Yes, to that. Thank u for clarifying. :thumbup:
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
1.KK4_Root_v1_1: Bricks my phone. Have to use Jig to come to download mode,
2.I897UCJF6-final-OCD-REV0: This is stock rom using odin, which also bricks my phone,
3.KI2_noBL_BoogsKernel: this wakes up my phone to GB stock Rom but no sign of booting into recovery, and my phone lost its root after installing it,
4.CornKernel_UCKK4_v705: successfully flashed using ODIN but still can not boot into recover.
Looks like I have to stick to Gingerbread for eternity and for more clarification,
Currently my has Firmware 2.3.5
Baseband I897UCKI2
Kernel 2.6.35.7-I897UCKI1- CL607313
Build: GINGERBREAD.UCKI2
Avikar said:
1.KK4_Root_v1_1: Bricks my phone. Have to use Jig to come to download mode,
2.I897UCJF6-final-OCD-REV0: This is stock rom using odin, which also bricks my phone,
3.KI2_noBL_BoogsKernel: this wakes up my phone to GB stock Rom but no sign of booting into recovery, and my phone lost its root after installing it,
4.CornKernel_UCKK4_v705: successfully flashed using ODIN but still can not boot into recover.
Looks like I have to stick to Gingerbread for eternity and for more clarification,
Currently my has Firmware 2.3.5
Baseband I897UCKI2
Kernel 2.6.35.7-I897UCKI1- CL607313
Build: GINGERBREAD.UCKI2
Click to expand...
Click to collapse
try flashing froyo or eclair
you can find these packages here
http://forum.xda-developers.com/showthread.php?t=1300843
Which one to try first?
Sent from my SAMSUNG-SGH-I897 using xda app-developers app
Avikar said:
Which one to try first?
Sent from my SAMSUNG-SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
try anything which you like
n205des said:
try flashing froyo or eclair
you can find these packages here
http://forum.xda-developers.com/showthread.php?t=1300843
Click to expand...
Click to collapse
As i mentioned stock rom 2.1 eclair from the same forum Bricks my phone,
Didnt try 2.2,
recently on the 2.3 from the same forum but no help...Instead of boot logo some white backgound with million colour dots appear and I can not
enter to recovery or download mode i have tried every thing,,,

Categories

Resources