Related
I'm looking to replace the launcher.apk in the /system/app folder. I know i could just download a replacement launcher from the market and use that but whenever i do that my phone seems to slow down considerably.
So what i'm hoping is that somebody can tell me the adb commands to use to remove the Launcher.apk from the system/app folder and replace it with my choice of launcher? If you know how please reply with the exact commands. Telling me to use adb uninstall will not help seeing as how i've already tried and it didn't work
Please do not tell me to go read adb for dummies or an adb command guide cause i have tried to use these and the commands i type in never work.
Please do not tell me to use the search button as i have and noone seems to have asked this question yet.
If it's not possible just say so.
you may be able to do this through terminal too.
ive not found a tutorial on this specific application but it can be done.
Try this
1. su (allows root permission)
2. mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system (make the system folder writeable)
3. cat /system/app/.apk > /sdcard/launcherbackup.apk (backs up system launcher)
4. cat /sdcard/(launcher name).apk > /system/app/launcher.apk (copies launcher to system)
5. enjoy
**PLEASE NOTE**
I am not responsible for if this fails. i have yet to try it myself as i find no need. the code was taken from another tutorial but so far has yet to fail to work for me on other aspects
**PLEASE NOTE**
Well theres 2 types of home replacements.
1. Who allow themselves to replace stock launcher
2. Who dont allow and have to be used as stand-alone
Regardless ur cleanest method would be :
adb remount
adb shell rm /system/app/Launcher.apk
adb uninstall com.android.launcher
adb shell rm /data/dalvik-cache/*Launcher*
adb shell rm /cache/dalvik-cache/*Launcher*
Now just place ur favorite launcher in ur /system/app folder.
adb remount
adb push <drag apk here> /system/app/
Now just reboot ur phone
traumatism said:
you may be able to do this through terminal too.
ive not found a tutorial on this specific application but it can be done.
Try this
1. su (allows root permission)
2. mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system (make the system folder writeable)
3. cat /system/app/.apk > /sdcard/launcherbackup.apk (backs up system launcher)
4. cat /sdcard/(launcher name).apk > /system/app/launcher.apk (copies launcher to system)
5. enjoy
**PLEASE NOTE**
I am not responsible for if this fails. i have yet to try it myself as i find no need. the code was taken from another tutorial but so far has yet to fail to work for me on other aspects
**PLEASE NOTE**
Click to expand...
Click to collapse
I did this for my hero and it works, thanks man
thanks a lot
traumatism said:
you may be able to do this through terminal too.
ive not found a tutorial on this specific application but it can be done.
Try this
1. su (allows root permission)
2. mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system (make the system folder writeable)
3. cat /system/app/.apk > /sdcard/launcherbackup.apk (backs up system launcher)
4. cat /sdcard/(launcher name).apk > /system/app/launcher.apk (copies launcher to system)
5. enjoy
**PLEASE NOTE**
I am not responsible for if this fails. i have yet to try it myself as i find no need. the code was taken from another tutorial but so far has yet to fail to work for me on other aspects
**PLEASE NOTE**
Click to expand...
Click to collapse
can i replace stock by any other launcher by this method???
You can use Link2sd app to convert an app (launcher from market) to system app, then reboot your device and then disable stock launcher in settings or freeze it with link2sd.
I still find having stock launcher there, in case something is wrong with an update, very useful, so I wouldn't even freeze the stock launcher.
Edit: obviously, root required, but its not like you didn't know that from the beginning.
Sent from my Nexus 7 using xda app-developers app
Daneshm90 said:
Well theres 2 types of home replacements.
1. Who allow themselves to replace stock launcher
2. Who dont allow and have to be used as stand-alone
Regardless ur cleanest method would be :
adb remount
adb shell rm /system/app/Launcher.apk
adb uninstall com.android.launcher
adb shell rm /data/dalvik-cache/*Launcher*
adb shell rm /cache/dalvik-cache/*Launcher*
Now just place ur favorite launcher in ur /system/app folder.
adb remount
adb push <drag apk here> /system/app/
Now just reboot ur phone
Click to expand...
Click to collapse
Wow I replaced my stock by holo launcher!!! Working fine
Thaknk you
bkrill said:
I'm looking to replace the launcher.apk in the /system/app folder. I know i could just download a replacement launcher from the market and use that but whenever i do that my phone seems to slow down considerably.
So what i'm hoping is that somebody can tell me the adb commands to use to remove the Launcher.apk from the system/app folder and replace it with my choice of launcher? If you know how please reply with the exact commands. Telling me to use adb uninstall will not help seeing as how i've already tried and it didn't work
Please do not tell me to go read adb for dummies or an adb command guide cause i have tried to use these and the commands i type in never work.
Please do not tell me to use the search button as i have and noone seems to have asked this question yet.
If it's not possible just say so.
Click to expand...
Click to collapse
The best n easiest way wud b usin a root browser.
Firstly root ur mob n download a file manager that can browse root folder such as root explorer.
Copy the launcher.apk file from ur sd card n paste it to system/app folder aftr activating r/w setting n set permissions to rw-r-r.
N then move the stocklauncher.apk to ur sd card.
For samsung gb mobs stock launcher is touchwiz30launcher.apk
Try to do tings in simple ways.
Sent from my GT-S5302 using xda app-developers app
Whatsapp problems
Hey guys,
The 4.4 KitKat Rom is working just fine. But I ran into some problems with Whatsapp. I successfully validated my phone number and restored my old messages. Now the problem is that Whatsapp won't recognize my contact numbers? When I press on the "New Conversation" button my friendlist should appear but it doesn't. Then I tried refreshing the list by pressing on menu and refresh. Then he tells me "Please try again later".
Has anybody got the same issues? Or any ideas?
Thanks
Ochs said:
Hey guys,
The 4.4 KitKat Rom is working just fine. But I ran into some problems with Whatsapp. I successfully validated my phone number and restored my old messages. Now the problem is that Whatsapp won't recognize my contact numbers? When I press on the "New Conversation" button my friendlist should appear but it doesn't. Then I tried refreshing the list by pressing on menu and refresh. Then he tells me "Please try again later".
Has anybody got the same issues? Or any ideas?
Thanks
Click to expand...
Click to collapse
theres no issue if change stock launcher only i think
bkrill said:
I'm looking to replace the launcher.apk in the /system/app folder. I know i could just download a replacement launcher from the market and use that but whenever i do that my phone seems to slow down considerably.
So what i'm hoping is that somebody can tell me the adb commands to use to remove the Launcher.apk from the system/app folder and replace it with my choice of launcher? If you know how please reply with the exact commands. Telling me to use adb uninstall will not help seeing as how i've already tried and it didn't work
Please do not tell me to go read adb for dummies or an adb command guide cause i have tried to use these and the commands i type in never work.
Please do not tell me to use the search button as i have and noone seems to have asked this question yet.
If it's not possible just say so.
Click to expand...
Click to collapse
Another suggestion guys.......note: dont ever uninstall the previous launcher yet...this result a crash...just do this first...your phone should be rooted try Link2SD app from playstore just scroll down and move app to phone and then the upper right corner you'll see the menu then convert to system app...and upper left corner then reboot....100% is working.....by arowenayih
Hi,
this thread is meant as a starting point for every kind of questions. I will write everything I know into this thread and update it (hopefully) frequently
Here are the topics handled for now (if you have any other questions you want to have answered you can PM me, so I can try to handle it if I know the solution and add this to my to do list in point 5!!! ):
1. How can I root my phone
1.1 General information/Basic adb-commands
1.2 Do I have to create a goldcard?
1.3 Tools you need
1.4 The automated way
1.5 The manual way (recommended by the author)
1.6 Problems and (hopefully good) solutions
1.7 References
2. Flashing images/ROMs
2.1 What is a recovery image
2.2 What is a boot image
2.3 How to flash/tools needed
2.3.1 Creating a Goldcard
2.4 Where can I get an overview of the existing ROMs?
2.5 Problems during flashing and solutions
2.6 References
3. Information about the Tattoo/Useful stuff
3.1 How to install busybox?
3.2 Can it perform multitouch?
3.3 How to increase battery life?
3.4 Using own ringtones for calls/sms
3.5 How to disable data transfer with a custom ROM?
3.6 How to make the Tattoo ring louder?
3.7 How to replace the home screen?
3.8 Disabling xxx-synchronisation with Google-servers
3.9 Backing up apk's and data to your PC
3.10 How to enable more languages on my mobile?
3.11 How to manually delete system apks? Alternatively with GUI?
4. Dev-Goodies
4.1 Modifying update.zips and resigning them
4.2 Modifying resources in apk-files and resigning them
4.3 Installing apks via adb for getting exact error codes if installation fails
4.4 Everything related to ROM cooking
5. Things I will do better in this thread due to user request
Please note: I won't be giving tutorials about Android-apps usage beside the one mentioned in my tutorial!
Let's start now:
1. How can I root my phone?
1.1 General information/Basic adb-commands
Rooting a phone enables you to do things, which normally aren't possible for the average user like:
- Removing apps which were preinstalled by the provider (like Orange, Vodafone, etc.). My Tattoo had Vodafone apps for buying music and other sh*t, which was installed on the system partition (to which a "normal" user has no rights to write to, including deleting).
The Tattoo was successfully rooted by a bunch of guys here, namely -bm-, mainfram3 and Coburn64 (maybe, I don't remember quite correctly ). Also the Tattoo was the first phone having a security mechanism hindering a user to mount the filesystems as read/write, which had to be overridden by remapping the read only memory region to a read/write one. This is done by the module Tattoo-hack.ko, also made by mainfram3. He also created the first boot.img, which enabled su directly from adb and loading Tattoo-hack directly from boot on.
A few words about adb:
ADB is a tool for communicating from the PC with the mobile phone. For this a service is running on the phone enabling the communication via Terminal Emulator. Here are the most useful adb-commands:
Code:
adb push localFileFromPC /path/on/mobilephone
-> pushes a file "localFileFromPC" to a specified location on the phone
adb pull /path/to/file pathFromPC
-> receives a file from the phone and stores it to "pathFromPC"
adb remount
-> This is only possible in custom ROMs, remounts the file system to r/w automatically
adb shell "command"
-> executes "command" and returns to the computer shell
adb shell
-> opens a shell session on the phone (from here on you have to be very careful! Also you can execute now normal linux commands like rm, mv, ls, chmod and so on, but not cp (this can done through busybox)). You will have to use this more often, so get used to it ;)
1.2 Do I have to create a goldcard?
I read this question quite often. For rooting, you don't need it, but for SIM-locked phones you can't flash custom unbranded ROMs (I think).
A guide to create a goldcard follow this link: http://forum.xda-developers.com/showpost.php?p=5179788&postcount=1 (thanks to MiSSigNNo to this point)
1.3 Tools you need
A complete set of tools can be found here Feel free to mirror it:
http://rapidshare.com/files/403766494/Tattoo.rar.html
This package contains:
- adb binaries for Windows (sorry Linux users )
- su (Please note: use the su-binary attached in this post, not the one in the archive!!!!!)
- m7 exploit
- Amon_RA recovery.img
- mainfram3 boot.img
- flash_image binary
- tattoo-hack.ko
1.4 The automated way
This method was created by maverixx and can be found here. This basically consists of a package doing everything you need by itself. It roots the phone and flashes maverixx recovery.img, which (no offense) I don't like as much as I like Amon_RA's one!). Just click the batchfile and it does the rest (you have to connect your phone via USB to your PC though ).
If you want to use the automated way, but flashing Amon_RA's recovery, just replace the recovery.img from maverixx' package with the recovery.img provided in my archive file (see 1.3 for the link).
In my time here I noticed quite a few users experiencing problems either with a fully functional su or with the recovery image not flashing certain update.zip packages. It seems to be a matter of luck.
1.5 The manual way (recommended by the author)
I personally like what is done when and how, that's why I recommend the manual way. So let's get down to business Let's see if you know all the adb-commands I wrote here:
1. Let's say you have everything unpacked into C:\Tattoo
2. In your terminal (on your PC) type:
- adb shell "mkdir /data/local/bin" (if it returns an error it means that the directory already exists, just proceed)
- adb push m7 /data/local/bin/
- adb push su /data/local/bin/
- adb push flash_image /data/local/bin/
- adb push tattoo-hack.ko /data/local/bin/
- adb push recovery.img /sdcard
- adb push boot.img /sdcard
3. We have every needed file on the phone now. Type now (we are still in your terminal):
- adb shell
$ cd /data/local/bin
$ chmod 766 m7 (I don't retain this step as mandatory, so if this process fails, just proceed)
$ while ./m7 ; do : ; done
lots of text until you see something like "wrote shell code", press enter 2 or 3 times enter to see:
#
4. Then perform this:
- # export LD_LIBRARY_PATH=/system/lib
- # export PATH=/system/bin
- # insmod ./tattoo-hack.ko
- # mount -o rw,remount /dev/block/mtdblock5 /data
- # mount -o rw,remount /dev/block/mtdblock3 /system
- # cat ./su > /system/bin/su
- # chmod 4755 /system/bin/su
- # chmod 755 ./flash_image
Click to expand...
Click to collapse
Questions?
1.6 Problems and (hopefully good) solutions
Q: How do I execute my command line tool?
A: On your Windows host, go to Start->Run...->type "cmd"
Q: Where is my adb? When I type it in my shell it says that it was not found!
A: The adb binary is found in the archive I supplied above or in the Google SDK. As my archive-file is quite smaller than the Google SDK you should take mine. Let's suppose your adb binary is unpacked in C:\Tattoo, then type:
Code:
Your\Current\Location> cd C:\Tattoo
C:\Tattoo> adb <command>
Q: adb says "error: device not found" when I try to launch the shell on the phone!
A: Connect the phone with the usb cable and make sure the sd card is not mounted as drive on your PC!!!
Q: When I want to copy something the phone returns that "cp" is not found! Also when I try to move a file, it says "cross-link device".
A: Well, copying from one partition to another is only possible either via busybox or via
Code:
cat file > /location/filename
Example:
cp /data/su /system/bin
is realized by typing
cat /data/su > /system/bin/su
Also make sure that system is r/w!!!
Q: flash_image returns write errors when flashing recovery/boot image!
A:
For boot: Try to redo the flash procedure
For recovery: Note that you can't flash the same recovery.img as the one already installed, so install another recovery.img first (like maverixx) and then Amon_RA's again. If it still doesn't work reboot, remount the partitions r/w, insmod tattoo-hack.ko and retry flashing.
Q: How can I unroot my device?
A: Just delete su from /system/xbin and restore the old boot.img. Alternatively see here for retrieving a stock ROM to flash it on your phone.
PM me with more questions and I'll post them with the possible solution.
1.7 References
- Zecanilis EXCELLENT Root-Recovery-Flash images thread
- maverixx' One-click root method+recovery thread
- Coburn64's Newbie guide for manual rooting (recommended reading!)
2. Flashing images/ROMs
2.1 What is a recovery image
A recovery image is not only useful to flash custom ROMs on your device. It also enables you to backup your entire phone contents to restore it completely in case of a brick, if anything should happen...especially SIM-locked mobiles should be backed up as soon as possible. Also many recovery image modders add several non-standard features like mounting the SD card while in recovery mode or enabling adb support, etc.
2.2 What is a boot image
The boot image not only contains the kernel which brings up your Tattoos, it only can be modified to load up modules enabling ext2/3 support, loading camera, remapping read only code to an r/w area (tattoo-hack.ko), etc. Without a working boot.img, don't even bother trying to boot the phone (maybe if you do a logcat it returns something useful to solve this problem )
2.3 How to flash/tools needed
Execute steps 1 to 4 in topic 1.5 first!
5. Now comes the hard part:
- # ./flash_image boot /sdcard/boot.img
- # ./flash_image recovery /sdcard/recovery.img
it can be that flash_image reports errors in the last step (recovery.img step), but another user said it would be still working to boot to recovery...but to be sure (if you got the error!!!) flash maverixx recovery.img and then again the one I supplied in my archive (Amon_RA)
Reboot once and when you connect with adb to your phone you should see the difference
Click to expand...
Click to collapse
2.3.1 Creating a Goldcard
This is a post I took from MiSSigNNo, kudos to him:
Creating the Gold Card:
[...]
4. We need the android-sdk tools, we can find them here: http://developer.android.com/sdk/index.html download them, and unzip in a folder maybe in C:\androidtools
5. Go the the Command line (Start->Execute->write cmd and OK), and there you should find where you unzip the android-sdk tools, example cd c:\androidtools\tools
6. Run this command "adb shell cat /sys/class/mmc_host/mmc1/mmc1:*/cid" if you had the microSD in the drive you will find a long number like:
532600bd227d9c0347329407514d5402
7. Go to this page to reverse it: http://hexrev.soaa.me/ and copy the code reversed:
In our example it will be: 00544d5107943247039c7d22bd002653
8. Go to this page to generate your GoldCard image: http://revskills.de/pages/goldcard.html
And put your reversed number and you email. You will receive an email with a file called "goldcard.img"
9. Now you need an Hex editor like HXD. Download it from: http://download.cnet.com/HxD-Hex-Edi...html?tag=mncol
10. Exactly the same as the instructions I pasted above:
11. Install and launch HxD Hex Editor program. (make sure you use "Run as Administrator" under Vista and win 7)
12. Go to Extra tab > Open Disk. Under Physical disk, select Removable Disk (Must be your SD card), uncheck “Open as Readonly), click OK. (BEWARE, MUST BE UNDER PHYSICAL DISK NOT LOGICAL DISK, THIS MISTAKE MADE ME BIG PROBLEMS)
13. Go to Extra again, Open Disk Image, open up goldcard.img which you’ve saved/unzipped earlier.
Now, you should have two tabs, one is your removable disk, the other is goldcard.img. Press OK when prompted for “Sector Size” 512 (Hard disks/Floppy disks), click OK.
14. Click on goldcard.img tab. Go to Edit tab > Select All, edit tab again > copy.
15. Click on the “removable disk” tab. Select offset (line) 00000000 till offset (line) 00000170 (including the 00000170 line), click on Edit tab and then Paste Write.
16. Click on File > Save. now you can exit the program. You now have a gold card.
[...]
Click to expand...
Click to collapse
2.4 Where can I get an overview of the existing ROMs?
Look it up here (Excellent work liderzre)
2.5 Problems during flashing and solutions
Q: HEEEEELLLPPP! flash_image says that it couldn't write to some memory addresses! What can I do?
A: Don't panic. First make sure to have loaded tattoo-hack.ko, remounted system and data to r/w and then try again with another recovery.img (either maverixx or Amon_RA). Flashing the same recovery.img again WON'T WORK!!!! That's why you have to take a little detour by first flashing another recovery image.
Q: How do I boot to recovery??
A: Type in your command line while the phone is plugged in:
Code:
adb shell "reboot recovery"
. If this doesn't work, turn off your phone, hold down the home-button and press the power-button. Then when the Tattoo logo can be seen, release the home button and the recovery screen should be seen
2.6 References
- Zecanilis EXCELLENT Root-Recovery-Flash images thread
- maverixx' One-click root method+recovery thread
3. Information about the Tattoo/Useful stuff
3.1 How to install busybox?
Load the busybox binary here (select the one with arm6 at the end). Put this binary onto your data or system partition (I suggest /system/xbin) and now there are two ways to install/enable it. See below
Method 1 (will extract EVERY FEATURE, but consumes A LOT of your disk space so be careful or switch to method 2)
Do this in your command line:
Code:
adb remount (make it r/w if not done already)
adb shell "mkdir /system/xbin" (create dir if it doesn't exist)
adb push busybox /system/xbin (please make sure to have busybox in the same directory as adb ;) )
adb shell
cd /system/xbin
./busybox --install
Method 2 (saves your precious disk space )
Do this in your command line
Code:
/system/xbin/busybox --install -s /system/xbin
3.2 Can it perform multitouch?
Nope, the Tattoo has a resistive touch screen, which is known to be NON-multitouch...newer generation or high-end phones usually have capacitative screens. My suggestion is not taking the Nexus One anymore, since their touch screen type supports only 2 fingers at once, while phones like the Samsung Galaxy S have a SUPER responsiveness and sensibility (and of course 10 fingers support).
3.3 How to increase battery life?
Okay, here are little tips how to increase battery life - mine holds 7 to 8 days and I surf, call ppl and sms almost every day:
1. Flash either fyodor 0.6.4.2 or Abyzou 2.1.9 - my favourite is fyodor ones (if I still would have a Tattoo, of course )
2. Download APNd roid from the market or here and disable your 3G Internet connection (for activating it, just start the program again!)
3. If you see that you have NO RECEPTION AT ALL in one place (at work for instance), turn off your phone as this will DRASTICALLY decrease battery life because the phone tries constantly to search for a network it can log on to.
4. Try to keep your phone in normal temperature areas (between 20 and 27 degrees celsius = 68 - 80.6 degrees fahrenheit)
5. Kill unneeded apps automatically (there are quite a few apps doing this)
3.4 Using own ringtones for calls/sms
Create a folder called "media" on the root of your SD card and a sub-folder called "audio" there you have to create one folder called "notifications" for SMS and "ringtones" for call sounds. Place every desired track into these folders and reboot your phone. You should see the entries now when choosing ringtones. Alternatively just load "Ringo Pro", a really powerful tool also able to display SMS pop-ups and much more.
3.5 How to disable data transfer with a custom ROM?
As already explained above, load APN droid from the market or here.
3.6 How to make the Tattoo ring louder?
There is a little app called "Louder Volume Hack" enabling your phone to ring much louder than normally. You can load it on any popular w*rez-site Unfortunately I cannot enter the link to the app here or PM it. Any questions requesting a link to this app will be deleted instantly, so don't bother trying and use Google. There are several buttons displayed, but for better visibility I suggest enabling the Widget and hacking the system there. Also please note that ROOT access is required!! Refer to section 1 to root your phone.
3.7 How to replace the home screen?
There are two ways to do it. Method 1 is the easier one, but runs the Google Launcher and the replacement laucher in parrallel, which implies more CPU usage and battery drain. Method 2 is the more brutal one, but enables you to run just one launcher.
Method 1:
Install the replacement home app and press the home button. A dialog should appear asking you which Home Launcher should be used.
Method 2:
Put your home replacement apk onto the root of your SD and make sure you have busybox installed and /system mounted as writeable. Rename the Home replacement apk to Launcher.apk and fire up adb shell:
Code:
mv /system/app/Launcher.apk /system/app/Launcher.apk.old && mv /system/app/Launcher.odex /system/app/Launcher.odex.old && cp /sdcard/Launcher.apk /system/app && chmod 755 /system/app/Launcher.apk
Should be a pretty generic approach
3.8 Disabling xxx-synchronisation with Google-servers
Go to settings, data synchonisation and disable the entries you don't want to have synch'ed with Google. Since it's long time ago since I did this (remember that I don't own a Tattoo anymore) the procedure can be slightly different from ROM to ROM.
3.9 Backing up apk's and data to your PC
By popular request, here a topic about how to backup apk's and their corresponding data manually (can be done separately, too if you want just one of the two). Doing it with the tar command HOPEFULLY preserves also all permissions!!! Check it:
Hit up adb shell and make sure have busybox:
Code:
for the apks
# tar -cvf /sdcard/dataAppsBackup.tar /data/app
for the data
# tar -cvf /sdcard/dataDataBAckup.tar /data/data
If you want to decompress these files again do:
Code:
# tar -xvf /sdcard/dataAppsBackup.tar -C /data
# tar -xvf /sdcard/dataDataBackup.tar -C /data
Note that these files won't be compressed! If you want to save some disk space on your SD then add the parameter 'z' (without the quotes) in the tar arguments (e.g. tar -cvfz for compressing and tar -xvfz for decompressing)
3.10 How to enable more languages on my mobile?
There is an app called MoreLocale in the market enabling you to select more languages. Download it, it's free
3.11 How to manually delete system apks? Alternatively with GUI?
For deleting manually you only need root-access. With GUI you need RootExplorer (buy it or do what you need to do to get this app-but with these features I would suggest to buy the app ).
Note: I do not take any responsibility if you delete the wrong apk and you lose any functionality of the phone. Do this only if you know what you're doing!
The manual way:
Connect the phone via USB, fire up adb shell and type:
Code:
insmod /LOCATION TO [URL="http://TATTOOHACK.KO/tattoo-hack.ko"]TATTOOHACK.KO/tattoo-hack.ko[/URL]
mount -o rw,remount /dev/block/mtdblock3 /system
cd /system/app
rm NAMEOFAPK.apk
The GUI way:
Install RootExplorer, open it, navigate to /system/app and press the little "Mount R/W" button at the top of the screen and begin deleting
4. Dev-Goodies
4.1 Modifying update.zips and resigning them
See this thread and get enlightened
4.2 Modifying resources in apk-files and resigning them
Same procedure as above:
1. Extract the file with WinRAR/WinZIP, delete the contents of META-INF and start modifying what you have to modify
2. Pack everything again into a ZIP file and sign it with the signapk.jar file (can be found somewhere in the forum or here). The syntax of how to use this can be found in the last link (yes, it's only 10 KB ).
4.3 Installing apks via adb for getting exact error codes if installation fails
Prerequisites: Either know the exact path to the apk or put it into the same directory as your adb executable and hit up your command line:
Code:
adb install /path/to/apk/file.apk
OR
adb install file.apk (implies that apk is located in same dir as adb)
4.4 Everything related to ROM cooking
Check this link (thanks to Decad3nce) and this one (thanks to mxlaser).
5. Things I will do better in this thread due to user request
- Nothing
The end for now.
Note: If you think that my thread is good, then please rate it with 5 stars
Changelog:
Version 1.0
- Initial draft
Version 1.1
- Added complete topic 1 now
- Fixed layout and some typos
Version 2.0
- Added complete topic 2 and half of 3
Version 2.1
- First prototype with all topics finished (will rework parts which are not quite understandable)
Version 2.2
- Added new question to 1.6
Version 2.3
- Added section 4.4 -> Everything related to ROM Cooking DUDEEEESSSSS
Version 2.4
- Added 3.11 How to manually delete system apks? Alternatively with GUI?
Version 2.5
- attached working su file - thanks to lovenemesis for this
Version 2.6
- added some mirrors for the Tattoo.rar archive - thanks to emb0re for providing some space
Version 3
- added topic about creating gold cards (2.3.1)
hi
very good initiative stuck
Great work
Very intuitive guide for beginner.
Though as an experienced and new android application developer, it really took me a whole afternoon to understand every step of the whole process. I am sure this guide would save many others wonderful Saturday afternoon.
Nice Work
Great Work From You Sir. This Will Be Useful for Beginners I Think This Will Save Lot Of Our Time's. And Mods Too
Thanks for the feedback...I hope that I can fill many topics tomorrow
P.S.: Indeed this is meant for the many unexperienced users who desperately want to flash custom ROMs but don't know how to do it...this also spares a lot senseless thread-posts I hope...^^
Dude
SSj Man Can You Add Tutorial Abt How to get the Apk file which i download from market in my mobile. if that is possible
3. We have every needed file on the phone now. Type now (we are still in your terminal):
- adb shell
$ cd /data/local/bin
$ while ./m7 ; do : ; done
lots of text until you see something like "wrote shell code", press enter 2 or 3 times enter to see:
#
Click to expand...
Click to collapse
For me I need to add execute permission for m7 before expolit, with
Code:
chmod 766 m7
.
jagan_3400 said:
SSj Man Can You Add Tutorial Abt How to get the Apk file which i download from market in my mobile. if that is possible
Click to expand...
Click to collapse
You mean getting the apk from your mobile on your PC for example?
lovenemesis said:
For me I need to add execute permission for m7 before expolit, with
Code:
chmod 766 m7
.
Click to expand...
Click to collapse
Hm, normally when you push the file via adb it will have user permissions, which includes execution...but I will add it to exclude any possible error...thanks for the info.
It might be worth to mention this in 3.1 Busybox installation:
Code:
adb push busybox /system/xbin/
I accidentallly use "adb push busybox /system/xbin" without the ending "/". Well, you know the rest part of the story...
Hmm, probably this one first, at least for the stock HTC ROM
Code:
adb shell "mkdir /system/xbin"
PS: Kind of weird for its name xbin, not the usual sbin on desktop linux. ;-)
TheSSJ said:
You mean getting the apk from your mobile on your PC for example?
Hm, normally when you push the file via adb it will have user permissions, which includes execution...but I will add it to exclude any possible error...thanks for the info.
Click to expand...
Click to collapse
Maybe it's because I am using a Fedora box, which the default permission for files in $HOME does not include execution.
lovenemesis said:
Hmm, probably this one first, at least for the stock HTC ROM
Code:
adb shell "mkdir /system/xbin"
PS: Kind of weird for its name xbin, not the usual sbin on desktop linux. ;-)
Click to expand...
Click to collapse
You're right, I added it already in the guide, thanks for the feedback. Well, /system/xbin isn't a "normal" directory indeed, but it was created for extra executables which normally aren't shipped in stock ROMs (like busybox).
4. Then perform this:
- # export LD_LIBRARY_PATH=/system/lib
- # export PATH=/system/bin
- # insmod ./tattoo-hack.ko
- # mount -o rw,remount /dev/block/mtdblock5 /data
- # mount -o rw,remount /dev/block/mtdblock3 /system
- # cat ./su > /system/bin/su
- # chmod 4755 /system/bin/su
Click to expand...
Click to collapse
I suppose after this step the stock ROM is rooted. Right?
But in Android Terminal Emulator gives me $ still. "su" reports an link_image error, which basically said about missing libbinder.so library.
Is it normal or I need to push an libbinder.so to /system/lib as well?
BTW: "adb shell " gives me # straightly.
Regards,
Hmm, I pushed another "su" binary to overwrite the one in Tattoo.rar. And now it works fine in Android Terminal Emulator.
Here is the su binary I use:
View attachment su.zip
Oops, Titanium Backup still refuses to work despite of working "su" binary.
What else should I do?
market not working
hi
i dont know why but the Market does not work for me can u give any solutions for the same im just not able to log in it keeps saying error i also tried with google mail and gmail id but no luck any suggestion pls
few questons kindly answer
hi
i have afew questions can u kindly answer
1. is wipe a must before flashing a new rom
i have flashed the Modoco rom and it was mentioned that this was not needed but i have read in many threads asking to do the same before flashing
2.to bring back contacts after flashing new rom can i use
a. backup pro or titanium backup
b. can i just use the out look sync and get back my contacts from my PC
3. if i restore the stock rom and latter on want to try one of the cooked roms do i need to do the rooting again ie does flashing stock rom remove the rooting
Note : i have been a WM user new to AM is why im asking such questions in the WM i have one app pim backup which would get back all my contacts in 1 min and when flashing any WM it will automatically wipe all the data from the phone this does not seem to be the case with AM is why i have asked above Questions
thanks in advance
lovenemesis said:
Oops, Titanium Backup still refuses to work despite of working "su" binary.
What else should I do?
Click to expand...
Click to collapse
Titanium Backup needs Busybox and su to work. If Titanium Backup tells you that it found BusyBox, then try to copy "su" to the following to locations:
/system/bin and /system/xbin
I think with the first it should work then.
haree said:
hi
i dont know why but the Market does not work for me can u give any solutions for the same im just not able to log in it keeps saying error i also tried with google mail and gmail id but no luck any suggestion pls
Click to expand...
Click to collapse
Do you use MoDaCo ROM or did u switch now to another? Normally the phone asks for log-in credentials when going online. When you enter them correctly, the login window should disappear and you should be able to access market...I know this sounds stupid, but check if you entered you PW correctly!
haree said:
hi
i have afew questions can u kindly answer
1. is wipe a must before flashing a new rom
i have flashed the Modoco rom and it was mentioned that this was not needed but i have read in many threads asking to do the same before flashing
2.to bring back contacts after flashing new rom can i use
a. backup pro or titanium backup
b. can i just use the out look sync and get back my contacts from my PC
3. if i restore the stock rom and latter on want to try one of the cooked roms do i need to do the rooting again ie does flashing stock rom remove the rooting
Note : i have been a WM user new to AM is why im asking such questions in the WM i have one app pim backup which would get back all my contacts in 1 min and when flashing any WM it will automatically wipe all the data from the phone this does not seem to be the case with AM is why i have asked above Questions
thanks in advance
Click to expand...
Click to collapse
1. As I told you via PM already: If the ROM is based on the same source ROM (HTC stock in your case) then a wipe is NOT required, but if you switch android version (AOSP, Vanilla, FroYo, Eclair) then you HAVE TO wipe.
2.
a) I had only problems with Titanium backup concerning restoring contacts. I would suggest using MyBackup Pro
b) Well, if you can sync to outlook, then I suppose yes, but I really doubt that these features are implemented in custom ROMs...
3. Well, if you mean restoring the NAND-backup and then flashing another cooked ROM (which are all rooted by default ), then no - you don't need to re-root. Only if you would flash the original/official HTC ROM which comes shipped as exe-file, but I don't see the sense in flashing this one...use your NAND-backups
TheSSJ said:
Titanium Backup needs Busybox and su to work. If Titanium Backup tells you that it found BusyBox, then try to copy "su" to the following to locations:
/system/bin and /system/xbin
I think with the first it should work then.
hi
thanks buddy for patiently answering all my Q
i got it now but i dont know why this Bl***dy market does not work what every i try ie when the net is on and ur browsing u see the E on ur phone screen and then the 2 white arrows flash this it self does not happen when i try to log in to market
just dont know what is wrong
right now im using Modoco and happy with it seems to be real fast and everything is working on this ROM
Click to expand...
Click to collapse
I looked around the net for a feasable solution but nobody seemed to give me a practical solution. So I decided to experiment and came up with an unbelivable solution that takes literally 20-30 seconds per app and is FULLY automated.
My problem was as follows. I like to install new ROMs by wiping, flashing and reinstalling my apps. The problem with that is when you have 130 apps and Astro file manager seems to install 3-5 then quits back to the packages screen, it becomes extremely friken agrivating and simply hell-as annoying!
So I needed a way to install all my previously backed up apps (which Astro does a BEAUTIFUL job with) from my SD card to my phone all in one go, without prompts and without any input.
To do this its simple, just write your own batch script and run adb install.
You will need:
1. Android SDK (your version, ie. 2.2, 2.1, 1.6 ect.)
Code:
youtube.com/watch?v=A1SOSXwkc_8
2. USB Cable to PC
3. Enable "USB Debugging" on phone
**Prefer doing a fresh install of latest ROM, no third party apps and dont open Android Market if you have Froyo because it will try and download all your previously downloaded apps again. Cool but not cool here.**
Now, I assume you already have the APK bunch on your SD card, like I had.
I use Astro File Manager to backup all my apks to my /sd/backup/apps (which is automatically set).
Once you have all your APKs in one directory, I suggest putting them on you C:\. For example "c:\apps" for ease of scripting.
Step 1.
Open command prompt (CMD) and change directory to your "c:\apps"
Example:
Code:
cd..
cd..
cd apps
Now you should see your path set as "C:\apps" in CMD.
Step 2.
Create directory print.
In CMD "C:\apps" run:
Code:
dir /s /b > print.txt
This will print all directory files and extensions but nothing else, like size and attributes into your "C:\apps" folder. Now you will see a "print.txt" file in your "c:\apps" folder. If you open it, you will see a list of all your APKs.
Step 3.
Assuming you are using Notepad to view your "print.txt" file, press "CTRL+H". This will open the Find and Replace dialog box.
In Find type
Code:
C:\
In replace type
Code:
adb install -r c:\
Hit enter and it will modify all the APKs with the adb install command. Save and close notepad.
Step 4.
Now you need to rename that .txt extension in your "c:\apps\print.txt" to "print.bat". You need to have extension shown in windows. Google that if you dont know how to do that.
Once saved as a .bat file, simply execute and it will run through the sequence to install all your APK files without any prompts on your phone. Voila, and enjoy.
EXAMPLE:"c:\apps\print.bat"
Code:
adb install -r c:\apps\com.twitter.android-1.apk
adb install -r c:\apps\com.ups.mobile.android-2.apk
adb install -r c:\apps\com.vavni.android.battleship-1.apk
adb install -r c:\apps\com.viclabs.myRemote-2.apk
adb install -r c:\apps\com.waterflea.wifiscan-1.apk
adb install -r c:\apps\com.wyse.pocketcloud-1.apk
adb install -r c:\apps\com.xrath.jmsn-2.apk
adb install -r c:\apps\com.xtralogic.android.rdpclient-1.apk
adb install -r c:\apps\com.xtremelabs.android.speedtest-1.apk
adb install -r c:\apps\com.yahoo.mobile.client.android.im-1.apk
adb install -r c:\apps\com.yahoo.mobile.client.android.mail-2.apk
adb install -r c:\apps\com.yahoo.mobile.client.android.search-1.apk
adb install -r c:\apps\hongbo.bluescreen-1.apk
adb install -r c:\apps\info.marlan.sim-1.apk
adb install -r c:\apps\koushikdutta.telnet-1.apk
adb install -r c:\apps\kr.mobilesoft.yxplayer-2.apk
adb install -r c:\apps\net.mafro.android.wakeonlan-1.apk
adb install -r c:\apps\nl.rogro.GScript-1.apk
adb install -r c:\apps\org.ajeje.fakelocation-1.apk
adb install -r c:\apps\org.ale.abtc-1.apk
adb install -r c:\apps\org.android7.aviplayer-1.apk
adb install -r c:\apps\org.connectbot-1.apk
adb install -r c:\apps\org.gmote.client.android-1.apk
adb install -r c:\apps\org.iii.ro.meridian-1.apk
adb install -r c:\apps\org.kman.WifiManager-1.apk
adb install -r c:\apps\org.openobjectives.serverassistant-1.apk
adb install -r c:\apps\org.prowl.networkmapper-1.apk
adb install -r c:\apps\org.transdroid-1.apk
This will go in sequence and show "success" when finished installing. It will then run the next command in sequence until its done.
** I tried to write this thread as a help to those trying to do the same thing I was trying to do. This is in no way meant to validate anything and is meant merely as a resource to anybody. If your going to be an ass, shove it, if you like it, im happy I could help.**
Wow, that certainly is an interesting solution. Personally I just push everything to data/app when in recovery, wipe dalvik-cache, then reboot, always works fine.
An even easier solution:
http://forum.xda-developers.com/showthread.php?t=716806
Thanks man! this helpes me out with multiple installs on the SDK's VM.
hello,
i know i am off topic but i dont find only this thread with the app i am searching.
i search for the "ups mobile" app and the market on my desire (froyo 2.2) found this app not. (Sorry for my english) The app is free, no warez!
Can anyone send my the app or an link with the app ?
many thanks and sorry for off topic.
peter
Check this out...
http://forum.xda-developers.com/showthread.php?t=740545
All the work are already done :0)
Thanks for the advice. However, I have about 50 apks to backup and Astro is unable to backup like 15 of them. IE Crystallight Defense. It just says it's unable to do it and I don't know why. Thanks for any help.
awesome, simple yet effective ... just restored 103 apps
thanks
this is simplest method yet...
copy .apk to any folder in sdcard, mine "marketapp"
then type these following commands below:
=====================================
adb shell
su
cd /sdcard/marketapp
for app in *.apk; do pm install -r $app; done
=====================================
regards,
d4rkcell
Install apk
Hello Fellow Androids!
If this is off topic, please accept my apologies. I am searching through all of XDA for a simple solution to adding apk. Now before you start bashing, please keep in mind that I am well aware of the "search" options + google + XDA etc.
Long story short, I have:
1) Rooted
2) Fashed many Roms (currently on Stock 2.1)
3) Lag Fixxed (see signature)
4) Removed Bloatware
5) I am familiar with ABD and commands
Problem:
All I'm trying to do is install certain "apk"s using ADB. I am well aware of the Program that installs/ pushes apps automatically that are found in G1 + Vibrant + HTC + Droid Forums without having to do any typin......BUT.....I would like to know my way around ABD <----Main reason why i dont want the easy way out.
I have been here:
http://forum.xda-developers.com/showthread.php?t=716806
as well as here:
http://forum.xda-developers.com/showthread.php?t=743457
even been here:
http://forum.xda-developers.com/showthread.php?t=740545
I know what you are thinking, why not use them? As i said before, i would like to be efficient with ADB. So...
I have tried methods found here:
http://forum.xda-developers.com/showthread.php?t=517874
As well as:
http://forum.xda-developers.com/showthread.php?t=532719
The problem I am having is:
Whether i navigate to my folder (desktop with all my apps) and use either
"adb push app /system/sd/app
adb push app-private /system/sd/app-private"
or simply
"adb install <path to file> - Example: adb install c:/apps/apps2sd.apk"
I always get the error: "cant find <whatever apk> to install"
No matter which directory i have it, i get that message.
Note:
1) I have debugging on
2) I mounted sd <----also tried Without mounting
3) I have used the same command when I removed bloatware but i understand Adding apks are slightly different.
4) I have all the drivers installed + Microsoft's .net framework + etc
What am i doing wrong?
All Critics, input, education bashing (just not hating) lol are welcome. Thanks!
dannycurtean said:
**Prefer doing a fresh install of latest ROM, no third party apps and dont open Android Market if you have Froyo because it will try and download all your previously downloaded apps again. Cool but not cool here.**
Click to expand...
Click to collapse
Very nice, thanks.
Is there any way to make installed APKs being seen by Market ?
I mean, is it possible to relink all the batch-installed .apk files as they were installed from Android market ?
If not, this method is fine at first but becomes painful with all the lost market updates
Thanks a lot
darkcell said:
this is simplest method yet...
copy .apk to any folder in sdcard, mine "marketapp"
then type these following commands below:
=====================================
adb shell
su
cd /sdcard/marketapp
for app in *.apk; do pm install -r $app; done
=====================================
regards,
d4rkcell
Click to expand...
Click to collapse
Thanks a lott for this !!!!
having about 260 apps installed it saves me several hours to reinstall after updating to froyo !!
k.mooijman said:
Thanks a lott for this !!!!
having about 260 apps installed it saves me several hours to reinstall after updating to froyo !!
Click to expand...
Click to collapse
Would be them updated from market, afterwards ?
I fear they'll loose the market link, by installing them from local apk files...
Even easier.
Thanks for the great information. I realize you can save yourself a few steps after gathering all the apk's in one location by using this command line (XP or higher):
Step 2. In the Android SDK folder containing adb, type:
Code:
for %f in (c:\apps\*.apk) do @(echo adb install -r %f)
dannycurtean said:
I looked around the net for a feasable solution but nobody seemed to give me a practical solution. So I decided to experiment and came up with an unbelivable solution that takes literally 20-30 seconds per app and is FULLY automated.
My problem was as follows. I like to install new ROMs by wiping, flashing and reinstalling my apps. The problem with that is when you have 130 apps and Astro file manager seems to install 3-5 then quits back to the packages screen, it becomes extremely friken agrivating and simply hell-as annoying!
So I needed a way to install all my previously backed up apps (which Astro does a BEAUTIFUL job with) from my SD card to my phone all in one go, without prompts and without any input.
To do this its simple, just write your own batch script and run adb install.
You will need:
1. Android SDK (your version, ie. 2.2, 2.1, 1.6 ect.)
Code:
youtube.com/watch?v=A1SOSXwkc_8
2. USB Cable to PC
3. Enable "USB Debugging" on phone
**Prefer doing a fresh install of latest ROM, no third party apps and dont open Android Market if you have Froyo because it will try and download all your previously downloaded apps again. Cool but not cool here.**
Now, I assume you already have the APK bunch on your SD card, like I had.
I use Astro File Manager to backup all my apks to my /sd/backup/apps (which is automatically set).
Once you have all your APKs in one directory, I suggest putting them on you C:\. For example "c:\apps" for ease of scripting.
Step 1.
Open command prompt (CMD) and change directory to your "c:\apps"
Click to expand...
Click to collapse
darkcell said:
this is simplest method yet...
copy .apk to any folder in sdcard, mine "marketapp"
then type these following commands below:
=====================================
adb shell
su
cd /sdcard/marketapp
for app in *.apk; do pm install -r $app; done
=====================================
regards,
d4rkcell
Click to expand...
Click to collapse
This looks like a great solution. Is there some way to run this from the phone itself? When I tried using Terminal Emulator in ICS, I get a Segmentation Fault error.
Found this in Google results, was extremely useful for restoring all my Xoom apps from my pre-root times
Hi to spartan062984
Couple of suggestions which I found to work.
Copy adb.exe to \windows\system32.--- this will give you a global adb which works from any directory.
Make a folder 'APK' ( or what you wish ) and put your apk's into it.
In DOS cd to APK and then run your install e.g. adb install xyz.apk \app
Hope it works for you
Keith
dannycurtean said:
I looked around the net for a feasable solution but nobody seemed to give me a practical solution. So I decided to experiment and came up with an unbelivable solution that takes literally 20-30 seconds per app and is FULLY automated.
My problem was as follows. I like to install new ROMs by wiping, flashing and reinstalling my apps. The problem with that is when you have 130 apps and Astro file manager seems to install 3-5 then quits back to the packages screen, it becomes extremely friken agrivating and simply hell-as annoying!
So I needed a way to install all my previously backed up apps (which Astro does a BEAUTIFUL job with) from my SD card to my phone all in one go, without prompts and without any input.
To do this its simple, just write your own batch script and run adb install.
You will need:
1. Android SDK (your version, ie. 2.2, 2.1, 1.6 ect.)
Code:
youtube.com/watch?v=A1SOSXwkc_8
2. USB Cable to PC
3. Enable "USB Debugging" on phone
**Prefer doing a fresh install of latest ROM, no third party apps and dont open Android Market if you have Froyo because it will try and download all your previously downloaded apps again. Cool but not cool here.**
Now, I assume you already have the APK bunch on your SD card, like I had.
I use Astro File Manager to backup all my apks to my /sd/backup/apps (which is automatically set).
Once you have all your APKs in one directory, I suggest putting them on you C:\. For example "c:\apps" for ease of scripting.
Step 1.
Open command prompt (CMD) and change directory to your "c:\apps"
Example:
Code:
cd..
cd..
cd apps
Now you should see your path set as "C:\apps" in CMD.
Step 2.
Create directory print.
In CMD "C:\apps" run:
Code:
dir /s /b > print.txt
This will print all directory files and extensions but nothing else, like size and attributes into your "C:\apps" folder. Now you will see a "print.txt" file in your "c:\apps" folder. If you open it, you will see a list of all your APKs.
Step 3.
Assuming you are using Notepad to view your "print.txt" file, press "CTRL+H". This will open the Find and Replace dialog box.
In Find type
Code:
C:\
In replace type
Code:
adb install -r c:\
Hit enter and it will modify all the APKs with the adb install command. Save and close notepad.
Step 4.
Now you need to rename that .txt extension in your "c:\apps\print.txt" to "print.bat". You need to have extension shown in windows. Google that if you dont know how to do that.
Once saved as a .bat file, simply execute and it will run through the sequence to install all your APK files without any prompts on your phone. Voila, and enjoy.
EXAMPLE:"c:\apps\print.bat"
Code:
adb install -r c:\apps\com.twitter.android-1.apk
adb install -r c:\apps\com.ups.mobile.android-2.apk
adb install -r c:\apps\com.vavni.android.battleship-1.apk
adb install -r c:\apps\com.viclabs.myRemote-2.apk
adb install -r c:\apps\com.waterflea.wifiscan-1.apk
adb install -r c:\apps\com.wyse.pocketcloud-1.apk
adb install -r c:\apps\com.xrath.jmsn-2.apk
adb install -r c:\apps\com.xtralogic.android.rdpclient-1.apk
adb install -r c:\apps\com.xtremelabs.android.speedtest-1.apk
adb install -r c:\apps\com.yahoo.mobile.client.android.im-1.apk
adb install -r c:\apps\com.yahoo.mobile.client.android.mail-2.apk
adb install -r c:\apps\com.yahoo.mobile.client.android.search-1.apk
adb install -r c:\apps\hongbo.bluescreen-1.apk
adb install -r c:\apps\info.marlan.sim-1.apk
adb install -r c:\apps\koushikdutta.telnet-1.apk
adb install -r c:\apps\kr.mobilesoft.yxplayer-2.apk
adb install -r c:\apps\net.mafro.android.wakeonlan-1.apk
adb install -r c:\apps\nl.rogro.GScript-1.apk
adb install -r c:\apps\org.ajeje.fakelocation-1.apk
adb install -r c:\apps\org.ale.abtc-1.apk
adb install -r c:\apps\org.android7.aviplayer-1.apk
adb install -r c:\apps\org.connectbot-1.apk
adb install -r c:\apps\org.gmote.client.android-1.apk
adb install -r c:\apps\org.iii.ro.meridian-1.apk
adb install -r c:\apps\org.kman.WifiManager-1.apk
adb install -r c:\apps\org.openobjectives.serverassistant-1.apk
adb install -r c:\apps\org.prowl.networkmapper-1.apk
adb install -r c:\apps\org.transdroid-1.apk
This will go in sequence and show "success" when finished installing. It will then run the next command in sequence until its done.
** I tried to write this thread as a help to those trying to do the same thing I was trying to do. This is in no way meant to validate anything and is meant merely as a resource to anybody. If your going to be an ass, shove it, if you like it, im happy I could help.**
Click to expand...
Click to collapse
This works good so far.. lets hope that system process likes it.
trying now.
darkcell said:
this is simplest method yet...
copy .apk to any folder in sdcard, mine "marketapp"
then type these following commands below:
=====================================
adb shell
su
cd /sdcard/marketapp
for app in *.apk; do pm install -r $app; done
=====================================
regards,
d4rkcell
Click to expand...
Click to collapse
I love simple solutions in linux
You have killed all 100km long tutorials and apps
Very Good, Thanx
i'm testing
very good method..
good lock..
I just put cm7 on a sd and am running it on my NC. how do I get the market on it? I saw one link but don't understand how to do it.
If all you want is the market, you can download the newest market APK from my webserver. The link is:
http://www.r00tyou.com/android/tools/Vending(new).apk
To push it to the device simple connect the device to your computer using ADB and type the following in the console:
adb devices
adb install \path\to\the\downloaded\apk.apk
Click to expand...
Click to collapse
Wait for it to successfully transfer over and install.
The viola, you have the newest market APK.
However, I suggest that you download the newest GAPPS from the cyanogen website and push over the whole gapps.
To do this, simply download the latest GAPPS from here:
http://wiki.cyanogenmod.com/index.php?title=Latest_Version#Google_Apps
Again, using ADB type the following commands:
adb shell mount -o remount,rw /dev/block/mmcblk0p5 /system
adb push [the path to your SDK tools folder]\system system/
adb reboot
Click to expand...
Click to collapse
The console will show the progress of what apps are being transferred over and installed. Once it is done rebooting it will prompt you for logging in to your google account to setup your device. You can simply skip this (Tapping in each corner of the screen starting from the top left going clockwise) or you can proceed with the setup process.
Hope that helps
Thanks for the info. It took some doing because I haven't written code since DOS.
Thanx alot man i had the same problem and this worked perfecty
Not sure if it's important since /system/ is mounted ro anyway but all apps in /system/app/ have 644 permissions, pushing files with adb (whether in linux or windoz) will give them 755 permissions defaultly, so I usually do a:
chmod 644 [app-name].apk
after I transfer the file. Might be a good idea to do this if you are remounting it a lot.
Cheers,
Mike
PS. Themed Markets :-D
ADB:-
Android Debug Bridge
Very useful program made itself by Google for Programmers and developers. Its based on command line and basically communicates with your Android to respond to certain commands. There is vast amount of knowledge about adb but its most useful commands limit to getting:-
Logcat:-
A real time log of what is happening in background of our devices. It is really useful for developers to see which component has malfunctioned and helps to narrow down their search for what failed and what needs to be fixed. Several times users are asked to give logcats of their devices which are giving errors. We will go in detail that how to get logcats in every and easiest way possible.
App Installation and Management:-
adb proves really handy if you want to install apks directly from your PC or want to batch install or delete them.
Shell Execution:-
You must have heard of Terminal Emulator. It is an app for android to execute shell commands(linux commands) which are basically present as applets in /system/bin, /system/sbin or /system/xbin(in our case) folders. A very imporant applet called busybox is installed there mainly used for execution of basic commands during root browsing or ROM installation. Many times updater script of ROMs use busybox commands to install it. Well, these commands can be initiated from your device too but they can be initiated from adb also making it easy for programmers.
Pushing and Pulling:-
Most used commands of adb. adb makes it a piece of cake for new device developers to get an ideo of structure and basic knowledge of devices by pulling command. We can pull out i.e copy any files or folders from our devices to our PC, even the root directories without rooting the devices. It help rooters and ROM chefs of new devices to get an idea and implement their mods on them. Pushing is also very useful command. It copies your files and folders from PC to your device. Very useful in pushing some /system apps and other things
Remounting and setting permissions
Basic commands:-
Of-course basic commands such as rebooting and rebooting in recovery mode and download mode are supported.
Others:-
There are several other features of adb such as fastboot, aapt, etc
Setting up ADB
Pre Requirements:-
PC(This is a windows guide, if asked I will add linux and mac guide later)
Java Runtime environment or Java Developing kit
Your Device Drivers
An Android Device
USB Debugging MUST be turned ON in the device for ADB to see it & Developer options is hidden in Android 4.2 and
above, Hitting Build number 10 times in
About Phone/Tablet reveals the menu (Thanks lilHermit for reminding me to add it)
Assuming you all these ready and working properly, we continue
If you are having trouble completing Pre-Requisites, there are several guides featuring them too
Start
1. First Download Android SDK. Roughly about 70 MB
2. There may be any compressed zip file or exe file
If zip file, then extract it to C:\android-sdk
If exe file then double click on it and install it in C:\ Drive(or any other drive you want)
3. Now to get adb and other tools, you need to download 'Platform Tools'
To download them, go to the android-sdk folder and double click on SDK Manager
It will ask you which package to download? However, it is your choice which package to Download, but here, we will only talk about platform
Tools. So, simply tick on Platform Tools and click on install. Once you have done it. Go to the platform-tools folder in the directory where you installed android-sdk. You will find several files there like adb, fastboot, aapt, etc
4. Now, you can backup the whole folder of android-sdk to any external storage that will make you not download package
again if you want to. You can have it placed in any computer and run it as it does not require registry to work
5. Now, you are just one step away from using adb. Next step is SKIPPING SETTING ENVIRONMENT VARIABLE (If you however want to set environment variables. Click on Show Content)
We can easily append the sdk platform-tools and tools folder to your systems environmental path variable directly from command line(cmd) by simply issuing one command and performing a system reboot:
Code:
[COLOR=Black]SETX PATH "%PATH%;[/COLOR][COLOR=Indigo]SDK_Install_Path[/COLOR][COLOR=Black]\platform-tools;[/COLOR][COLOR=Indigo]SDK_Install_Path[/COLOR][COLOR=Black]\android-sdk-windows\tools" -m[/COLOR]
Just replace the "SDK_Install_Path" in the above with the proper path of your SDK installation. Example: C:\android-sdk-windows
(Thanks to WugFresh for telling me :victory
Many guides on internet say that it is to be done for making it easy for users and if you have some basic knowledge of Command Prompt,
you will know that to execute any application with command prompt, you first need to change the directory to the one where application is
placed. And to skip changing the directories every time you open CMD, you need to put that application is environment variable. However, we will not do so.
6. Type cmd in the search bar. Copy cmd.exe from there. Go to the directory where you have installed android-sdk. Go to platform-tools folder. Paste cmd there, right click on it and in the settings, select Run as Administrator.
7. You are done. Now what to do in it?
ADB Commands
Type adb in command prompt. And several commands will show up on your screen. It is very difficult to analyse these all commands, so we will only talk about most used and important commands
Connect your device via USB cable
And open the CMD in platform-tools folder(Make a shortcut of it on desktop). And type the suitable commands
Code:
adb devices
Will show the list of devices attached to the PC andtheir serial numbers. If this shows up correctly on your PC, then it means that everything is fine for continuing.
Logcat
Code:
adb logcat
It will display the real time log of your device
Best time to do it is when your device boots up
Now, many users ask me how to copy the logcat and upload it from CMD
There are several methods:-
1. Right click on the Title Bar of Command Prompt. Hover the cursor over edit and select mark. Select all the things you want to copy and then click enter. All the things will be copied to clipboard.
2. This is the correct way of getting logcat saved.
Code:
adb logcat > logcat.txt
This command will create a logcat.txt document in platform-tools folder with the complete logcat of the device. Ofcourse you can type any name instead of logcat.txt
3. I prefer taking logcat this way as it neatly compiles logs of different time
Code:
adb logcat -v long > logcat.txt
This is a very nice way to get logcat.
Installing Apps
Code:
adb install %PATH OF APK%
This will install an app on your Android
For example, if my app AreeB.apk is in G:\ drive (G:\AreeB.apk)
Then I will type
Code:
adb install G:\AreeB.apk
Be sure your apk is not in a folder that has space in its name, else the command will break at space bar.
For eg:-
G:\Program Files\AreeB.apk
Note:
If you have spaces in path of apk, you can execute the command without breakage if you include the path inside quotes. (Thanks to etcman)
Eg:-
Code:
adb install "G:\Program Files\AreeB.apk"
Mounting
However, I never found any problem in tweaking with system files with adb, but some users said that they couldn't do it, so the problem was that their system partition was mounted as Read Only(R/O)
So, it is necessary now to tell how to mount system partition as Read Write(R/W)
Code:
adb remount
It is easiest way to do so, if it does not work then
There is another method that we will discuss in ADB Shell commands section
Pushing and Pulling
For pushing,
Type
Code:
adb push %PATH TO BE PUSHED% %PATH WHERE TO BE PUSHED%
Suppose I have an app named SystemUI.apk(PATH = G:\SystemUI.apk) which I want to push in /system/app/ on my android(or in other words, install an app as a system app). Then I would type
Code:
adb push G:\SystemUI.apk /system/app/
More examples
G:\Dance.txt file to be pushed in Dance folder in sdcard
Code:
adb push G:\Dance.txt /sdcard/Dance/
OR
Code:
adb push G:\Dance.txt /mnt/sdcard/Dance/
G:\Movies folder to be transferred in SDCARD in Videos Folder
Code:
adb push G:\Movies /sdcard/Videos/
G:\system\framework\framework-res.apk to be pushed in /system/framework/
Code:
adb push G:\system\framework\framework-res.apk /system/framework/
For pulling,
push command replaces with pull and paths are swapped
Code:
adb pull %PATH TO BE PULLED FROM% %PATH TO PLACE PULLED FILE%
Example,
All system apps are to be pulled to G:\ROM\system\app
Code:
adb pull /system/app G:\ROM\system\app\
build.prop to be extracted to desktop
Code:
adb pull /system/build.prop C:\Users\Areeb\Desktop\
However, if a folder is in platform-tools folder, you don't need to type full path
Suppose if I type
Code:
adb pull /system/ system
Then a folder named system will be created inside platform-tools with all the files in system in it
If a file is in platform-tools folder, then also no need to type full path
For example,
There is an app name DeskClock.apk in this folder then, to push it to /system/app, type
Code:
adb push DeskClock.apk /system/app/
ADB Shell Commands
This mode of adb allows you to execute linux shell commands from your PC
These commands can aldo be executed through the mobile using Terminal Emulator
To initiate shell mode
Type
Code:
adb shell
You will get an prompt like this
sh-3.2#
Now you are in shell mode
adb commands won't work here and a new set of commands will work here. But we will only go in a little detail here.
Assuming you are in adb shell mode, I will only type commands that will work on shell. Note:- These commands won't work if you type them alone on cmd. But, these command will directly work on your mobile's Terminal Emulator
As these commands can also work on mobile, I am going to tell you a way of taking logcat on mobile
Type
Code:
logcat
You will see log of your device
To save this
Type
Code:
logcat > /sdcard/log.txt
A file named log.txt will be generated in sdcard
Uninstalling Applications
Code:
cd /data/app
This will change the directory to /data/app
Code:
ls
This will show the list of files in there
Suppose, there is an app named com.opera.browser (Opera Mobile) you want to uninstall it
Type
Code:
rm -r com.opera.browser
This will uninstall the app
Mounting Command:-
Code:
mount -o rw,remount /dev/block/mtdblock3 /system
Miscellanous commands:-
su: Initiates root request
du: Shows file foldrs and size
date: Shows todays date
ls: Shows list of directory
cd: Changes working directory
rm: Removes the file
logcat: Displays logcat
mount: Mounts the partition
busybox: Busybox Applets
Credits
Google: For Android and several searchings
Samsung: For Galaxy Ace s5830I
paxChristos for amazing logcat guide
Broadcom: For their Open Sourceness
XDA Forums : For the precious knowledge
Reserved
Reserved Once More
Last One
Reserve the guide
install full rom
how to install a full rom from adb?
Pretty sure it's impossible. Sorry.
Sent from my E15i using XDA Premium App
Perfect Guide to use ADB Commands..
It is very clear and perfect guide to use ADB commands.. I tested this all and works fine..
You can use apks to do logcats from the phone too, I use catlog.
About Broadcom being open sourced made me laugh hahaha.
open source broadcomm, i see what you did there .
Updated OP
Hey, I have downloaded adb a week ago. I did everything like your tutorial and more but adb doesn't see my device. I already have USB Debugging on and have the USB Drivers, but it doesn't work. This is what I get (Screenshot)
Android-fany said:
Hey, I have downloaded adb a week ago. I did everything like your tutorial and more but adb doesn't see my device. I already have USB Debugging on and have the USB Drivers, but it doesn't work. This is what I get (Screenshot)
Click to expand...
Click to collapse
Probably because of bad drivers
Can you use any other software with your mob
Because when I had this problem, reinstalling drivers fixed it.
iamareebjamal said:
Probably because of bad drivers
Can you use any other software with your mob
Because when I had this problem, reinstalling drivers fixed it.
Click to expand...
Click to collapse
I already reinstalled it like 5 times. Still doesn't work.
Android-fany said:
I already reinstalled it like 5 times. Still doesn't work.
Click to expand...
Click to collapse
Which Windows?
Which ROM?
iamareebjamal said:
Which Windows?
Which ROM?
Click to expand...
Click to collapse
Windows Vista
Stock Rom + Interactive Kernel (If the kernel is important too)
Android-fany said:
Windows Vista
Stock Rom + Interactive Kernel (If the kernel is important too)
Click to expand...
Click to collapse
Ah Vista
That old Nemesis
Frankly telling you bro, Vista sucks big time
I unistalled it as soon as I found out that Android kitchen won't work on it
Sorry bro
I don't know much about Vista
Install 7 or 8
AW: [GUIDE][ADB]Easiest How to use adb, logcat, etc for noobs and newbies
iamareebjamal said:
Ah Vista
That old Nemesis
Frankly telling you bro, Vista sucks big time
I unistalled it as soon as I found out that Android kitchen won't work on it
Sorry bro
I don't know much about Vista
Install 7 or 8
Click to expand...
Click to collapse
I can't install Windows 7/8 because it is not my computer.
But Android Kitchen and the other tools works. Just not adb.
Tapatalked by s5830i
Android-fany said:
I can't install Windows 7/8 because it is not my computer.
But Android Kitchen and the other tools works. Just not adb.
Tapatalked by s5830i
Click to expand...
Click to collapse
Very strange
Download My Phone Explorer and check if its working!!
Its just 2mb-6mb