I've been use my GT-N7000 with paranoid rom for long time (Since its release). Using pie to navigate instead of hardware button.
Until one rainy day. my phone just got a drop of water on home button and it's broken. but I continue using my phone with pie's soft button without problem.
But the time's come when I do a routine clean flash rom from stock after dirty flash for many time. I just use power menu to reboot into download mode and flash to stock rom using odin as usual. next step is just easily got into stock recovery and flash Philz rom for CWM.... Here's where I get stuck. My stock rom got bootloop. and now I can't go anywhere without home button.
My Note is half dead now.
ilakya said:
Just to share my experience so this thread is not in help forum.
I've been use my GT-N7000 with paranoid rom for long time (Since its release). Using pie to navigate instead of hardware button.
Until one rainy day. my phone just got a drop of water on home button and it's broken. but I continue using my phone with pie's soft button without problem.
But the time's come when I do a routine clean flash rom from stock after dirty flash for many time. I just use power menu to reboot into download mode and flash to stock rom using odin as usual. next step is just easily got into stock recovery and flash Philz rom for CWM.... Here's where I get stuck. My stock rom got bootloop. and now I can't go anywhere without home button.
My Note is half dead now.
Click to expand...
Click to collapse
for that there is USB Jig which will allow you to get into download mode and you can flash philz kernel with bootloop fix from there.
treacherous_hawk said:
for that there is USB Jig which will allow you to get into download mode and you can flash philz kernel with bootloop fix from there.
Click to expand...
Click to collapse
Thank you. I'm looking for one of that.
ilakya said:
Just to share my experience so this thread is not in help forum.
I've been use my GT-N7000 with paranoid rom for long time (Since its release). Using pie to navigate instead of hardware button.
Until one rainy day. my phone just got a drop of water on home button and it's broken. but I continue using my phone with pie's soft button without problem.
But the time's come when I do a routine clean flash rom from stock after dirty flash for many time. I just use power menu to reboot into download mode and flash to stock rom using odin as usual. next step is just easily got into stock recovery and flash Philz rom for CWM.... Here's where I get stuck. My stock rom got bootloop. and now I can't go anywhere without home button.
My Note is half dead now.
Click to expand...
Click to collapse
All you have to do is connect yr phone to pc and use adb to reboot recovery. I ve the same broken home button i use jig to go to download mode and odin to flash jb. Usually after flashing u ve to go to recovery to wipe factory data reset otherwise u will be in splash screen loop. While it is in this loop adb will see yr device just use it to reboot into recovery. I did it this way and it works for me. I assume yr usb debugging is on before u flash it. Good luck
ndmuni said:
All you have to do is connect yr phone to pc and use adb to reboot recovery. I ve the same broken home button i use jig to go to download mode and odin to flash jb. Usually after flashing u ve to go to recovery to wipe factory data reset otherwise u will be in splash screen loop. While it is in this loop adb will see yr device just use it to reboot into recovery. I did it this way and it works for me. I assume yr usb debugging is on before u flash it. Good luck
Click to expand...
Click to collapse
Thanks! I'll try it.
Related
my problem is that i used to have Cm9 (beta 8) but i wanted to return to my operator stock ROM so i flash it with Odin, One package, but now it keeps rebootng i can see samsung logo and then Telcel (splash screen o boot animation) it keeps doing it again and again i cant go to Download Mode via Home-vol down-power because my volumen key doesn't work (i brake it), i just need to know what to do? can i go to download mode via ADB or what help me
When phone switched off:
Home Button + Power - open recovery
Wipe Data and Cache, reboot
You could try Recovery mode and wipe.
keki92 said:
my problem is that i used to have Cm9 (beta 8) but i wanted to return to my operator stock ROM so i flash it with Odin, One package, but now it keeps rebootng i can see samsung logo and then Telcel (splash screen o boot animation) it keeps doing it again and again i cant go to Download Mode via Home-vol down-power because my volumen key doesn't work (i brake it), i just need to know what to do? can i go to download mode via ADB or what help me
Click to expand...
Click to collapse
Your might want to try PWR + HOME to get into Recovery Mode screen, then Wipe Data (Factory Reset), when done remove battery, wait 10 sec., then insert battery and boot normally... has worked for me on the orphaned S5830D SGAce w/ DTLKI4 f/w. BUT, be aware, all user settings and installed apps are vaporized !!! Stuff on /SDCARD is safe.
Cheers,
help please
donACEsko said:
When phone switched off:
Home Button + Power - open recovery
Wipe Data and Cache, reboot
Click to expand...
Click to collapse
but my buttons vol down and vol up doesn't work
lgo51 said:
Your might want to try PWR + HOME to get into Recovery Mode screen, then Wipe Data (Factory Reset), when done remove battery, wait 10 sec., then insert battery and boot normally... has worked for me on the orphaned S5830D SGAce w/ DTLKI4 f/w. BUT, be aware, all user settings and installed apps are vaporized !!! Stuff on /SDCARD is safe.
Cheers,
Click to expand...
Click to collapse
yes i know that wiping all data works again but my keys Vol + or Vol - doesn't work it's any way to do it via SDK or ADB
RTFM !
keki92 said:
yes i know that wiping all data works again but my keys Vol + or Vol - doesn't work it's any way to do it via SDK or ADB
Click to expand...
Click to collapse
The keys needed are: POWER and HOME
The keys not used are: VOLUME +/-
keki92 said:
my problem is that i used to have Cm9 (beta 8) but i wanted to return to my operator stock ROM so i flash it with Odin, One package, but now it keeps rebootng i can see samsung logo and then Telcel (splash screen o boot animation) it keeps doing it again and again i cant go to Download Mode via Home-vol down-power because my volumen key doesn't work (i brake it), i just need to know what to do? can i go to download mode via ADB or what help me
Click to expand...
Click to collapse
One package? Aren't you supposed to use the one with the 5 different files and not just one? To make a completely clean stock rom install, I mean. If that's what you want.
I think he(or she) want a stock rom only. You need to do a full wipe after flash with odin. Maybe touch recovery helps you, but i cant find any . You can go to download mode by "adb reboot download" , i think it cant success without wipe.
Or maybe try to flash a rom with 5 files as SuperAce609 said.
No. You can't flash 2.3.6 directly.
You need to flash 2.3.3 first , then 2.3.4 and last 2.3.6 using Odin.
Sent from my impulses.
yeowwwai said:
No. You can't flash 2.3.6 directly.
You need to flash 2.3.3 first , then 2.3.4 and last 2.3.6 using Odin.
Sent from my impulses.
Click to expand...
Click to collapse
no need for that bro !!!!
@OP
just go to recovery > factory reset(wipe data)
and then reboot......Ur done
so simple.....
lol. u guys didnt even try to understand what his problem in the first place. atleast read the first post properly before giving suggestions.
the poor guy had his vol up and down button broke, and u suggest him to wipe data in recovery.
thing is his vol up and downn button doesnt work! so how can he navigate in recovery? lol
btw op, u said that u flashed onepackagee file via odin. so how did u manage to go into download mode in the first place when your vol down button is busted?
if u managed to go into download mode again, this time flash the full package instead.
SuperAce609 said:
One package? Aren't you supposed to use the one with the 5 different files and not just one? To make a completely clean stock rom install, I mean. If that's what you want.
Click to expand...
Click to collapse
I am having the same problem.
The phone keeps rebooting on startup. The phone can go in download mode but can't go in recovery mode.
Do you know any good link to download multi file package? I can't seem to find it anywhere
which Rom You were using and which firmware do you want?
keki92 said:
which Rom You were using and which firmware do you want?
Click to expand...
Click to collapse
My phone was running 2.2.1 Froyo. I tried to upgrade it to 2.3.6 using process mentioned here. http://androidadvices.com/update-gal...wktm-firmware/
The Odin completed successfully and restarted the phone. But the phone was running spanish language. I was getting an alert after every 3-4 seconds. But i could not read it as it was spanish. I restarted the phone and it went in boot loop. The phone keeps rebooting every 2 seconds.
I can't get into recovery mode but I can get to download mode.
I have tried flashing many ROMs from sammobile.com but none of them is working.
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
If you can get into download mode (power off, hold V+/V-, insert USB), you can try flashing a ROM via Heimdall. Apex 12.5 has a package you can flash from Heimdall.
You can also try Mosaic 9, as that has an Odin-based installer package.
surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
yes you can, use the link below and download any of the latest rom with bootloader based on odin.
http://forum.xda-developers.com/showthread.php?t=1300843
Galaxy Grand Bricked
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP
KrisjNoel said:
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP
Click to expand...
Click to collapse
Read above, the answer was given.
http://forum.xda-developers.com/showthread.php?t=1300843
same problem but on a different device its gt-i9070 by samsung I download ROMs already but cant flash them there is absolute no custom recovery for this model tried anything and everything on google and xda , any solution to apply ROM not using recovery
Is this file can use to flash i9300??? Where can i get custom rom for gt-i9300 that flash via odin...bcoz my s3 also cannot boot to recovery mode to hard reset
Hey,
I'm using samsung galaxy star s5282. I rooted this phone 2 days ago. Everything went good until today when i was i my class it suddenly switched off. When i rebooted it, it hang on the samsung logo.
I tried to boot into cwm recovery mode by pressing v+, home, power but it boots into default system recovery mode.
I again flashed cwm recovery many times using odin but it dosent work. Odin shows pass but when i reboot my phone in cwm recovery mode my phone enters in default system recovery mode.
What should i do please please please help.....
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
applies to all recoveries
cheers
bhavnoor singh
surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
Surenda 1863,
I had exactly the same problem and it took me almost one week of fiiddling and searching the Web to solve it.
The solution was in front me since day ONE : install ODIN on the PC !
In my case, I had I had accidentally wiped out the stock ROM and the tablet was hopelessly frozen on the download mode. I couldn't turn it off to boot it back with any of the usual buttons ( Volume , Home, Power)
I made the wrong assumption that since my PC didn't see the tablet, it couldn't connect to Odin either . I was wrong!
Here is what you have to do:
1. Install Odin on your PC. Connect the tablet to it. You will see that Odin sees the tablet because there will be a caption saying "added" on the top left.
2. Press the AP tab button at the right to go to the location where your Stock ROM is. The stock ROM file will have an MD5 ending.
3 Once the file is loaded (next to the AP button) just press Start. You will see the DOWNLOAD bar gradually filling up on the tablet and at the top left of ODIN.
4. When the operation is terminated, you will see a caption " PASSED" at the top left of he Odin screen and the tablet will automatically boot up to the HOME screen.
As simple as this! I didn't even have to worry about flashing the TWRP ( or CWR) recovery system, probably because the OS ROM was already wiped out. May be your case is different. I only know that in my case it worked like a charm.
Ittiandro
Was on CM9 wiped everything. Clean install and flashed a JB rom (CM10) and am now stuck on boot screen? I am flashing for a friend I rooted his phone a while ago and needed to update him. I do this on my own HTC device all the time. So i am not sure what one does when stuck on a samsung device. Help is greatly appreciated
zkrp5108 said:
Was on CM9 wiped everything. Clean install and flashed a JB rom (CM10) and am now stuck on boot screen? I am flashing for a friend I rooted his phone a while ago and needed to update him. I do this on my own HTC device all the time. So i am not sure what one does when stuck on a samsung device. Help is greatly appreciated
Click to expand...
Click to collapse
Is it bootlooping? How long as it been on the boot screen?
Are you able to get in recovery? If so, reflash (dirty) right over CM10. If that doesn't work, get in download mode, flash stock KK4 with Odin then Corn kernel with Odin 1.85, from there, you can flash CM10 and the Gapps.
BWolf56 said:
Is it bootlooping? How long as it been on the boot screen?
Are you able to get in recovery? If so, reflash (dirty) right over CM10. If that doesn't work, get in download mode, flash stock KK4 with Odin then Corn kernel with Odin 1.85, from there, you can flash CM10 and the Gapps.
Click to expand...
Click to collapse
what is the method to get into Recovery without the power button? My friend just told me his button is janky at best? It goes to the white AT&t screen then sits on that screen the whole time never moves sometimes is goes black but just pops back up. We wiped everything so there is nothing to boot to. We were trying to just wipe everything clean and start over to just clean up the device. So what options do I have, or do you suggest? thanks again
zkrp5108 said:
what is the method to get into Recovery without the power button? My friend just told me his button is janky at best? It goes to the white AT&t screen then sits on that screen the whole time never moves sometimes is goes black but just pops back up. We wiped everything so there is nothing to boot to. We were trying to just wipe everything clean and start over to just clean up the device. So what options do I have, or do you suggest? thanks again
Click to expand...
Click to collapse
The buttons combo to recovery is both volumes + power button, Download mode is volume down + power button
this worked for me
BWolf56 said:
Is it bootlooping? How long as it been on the boot screen?
Are you able to get in recovery? If so, reflash (dirty) right over CM10. If that doesn't work, get in download mode, flash stock KK4 with Odin then Corn kernel with Odin 1.85, from there, you can flash CM10 and the Gapps.
Click to expand...
Click to collapse
this is what worked for me in similar situation.
zkrp5108 said:
what is the method to get into Recovery without the power button? My friend just told me his button is janky at best? It goes to the white AT&t screen then sits on that screen the whole time never moves sometimes is goes black but just pops back up. We wiped everything so there is nothing to boot to. We were trying to just wipe everything clean and start over to just clean up the device. So what options do I have, or do you suggest? thanks again
Click to expand...
Click to collapse
The bootloop you are experiencing isn't really something that you did wrong. Going from ICS to JB includes a partition layout change and when you flash a JB rom the first time it will either reboot during the first flash or it will flash quickly(only flashing the new kernel and changing the layout) then when you try to boot you end up in a bootloop.
Now as far as getting back into recovery... my power button is jacked too so heres some ideas for you. If you do a battery pull and then replace it does the phone automatically power on? If yes then do a battery pull, then before replacing it, hold down the power and both volume buttons. Insert the battery while still holding them all. You should then see the att screen then maybe the kernel splash screen or itll just go black. As soon as you see the att screen again release all of the buttons and it will (hopefully) boot you into recovery. This has worked for me even though my power button doesn't work.
zkrp5108 said:
what is the method to get into Recovery without the power button? My friend just told me his button is janky at best? It goes to the white AT&t screen then sits on that screen the whole time never moves sometimes is goes black but just pops back up. We wiped everything so there is nothing to boot to. We were trying to just wipe everything clean and start over to just clean up the device. So what options do I have, or do you suggest? thanks again
Click to expand...
Click to collapse
The method of adb or at least "[Utility] ADB Portable by Red_81" found in the dev forum would work... but only if somehow ur debugging was enabled. If not, then download mode is the only option.---hold both volume +&- and insert mirco usb...
Sent from my SAMSUNG-SGH-I777 using xda premium
Hi guys, so i got a new Mini2, and... messed with it, pulled a firmware version from a dif zone by mistake... after i had cwm jena and clockworkz working, installed that asian firmware, and never got the phone to work again, tried several stock rom installs (17 and counting, with/without jena firmware download also), it just keeps doing the boot loop, and i can't access the Recovery menu (vol +/- home power buttons at start).
I've been reading all the meaningful threads here, tried doing button combination with battery, without and nothing seems to work.
Any and all help will be greatly appreciated.
Take it to samsung service senter if u got warranty and if isnt try to use another mini 2 battery but I think it may not work and try to press all butoms at same time for 2min and if nothing work buy or make a JTag
Sent from my GT-S6500D using xda app-developers app
go to download mode and don't accept terms (up volume) and quick hold recovery combination when it will start to reboot (ofc when samsung logo will appear don't hold keys). Try few times and it will work, if not 1st then another time. Do factory restet, reboot phone and take off battery. Turn on in download mode and install MD1 XEO stock and do again factory reset using trick from above (go to download mode and don't accept terms (up volume) and quick hold recovery combination when it will start to reboot.)
Worked...
brainscollector said:
go to download mode and don't accept terms (up volume) and quick hold recovery combination when it will start to reboot (ofc when samsung logo will appear don't hold keys). Try few times and it will work, if not 1st then another time. Do factory restet, reboot phone and take off battery. Turn on in download mode and install MD1 XEO stock and do again factory reset using trick from above (go to download mode and don't accept terms (up volume) and quick hold recovery combination when it will start to reboot.)
Click to expand...
Click to collapse
You sir... you are my new hero! key trick is pressing the recovery combination quick before logo appears and ... guess what i was holding the damn buttons so hard i was thinking they'd eventually lose pressure
My mini2 is alive :angel:
I'm glad to help you cheers
I have similar problem:
1. no recovery mode, only download mode
2. no matter what stock firmware I flash using odin I get bootloop
I tried the trick to go download mode > reject codition and then press the recovery mode combination but did not work
I wonder if there is a Cyanogen firmware in tar.md5 format so I can flash with odin ?
mihaivt said:
I have similar problem:
1. no recovery mode, only download mode
2. no matter what stock firmware I flash using odin I get bootloop
I tried the trick to go download mode > reject codition and then press the recovery mode combination but did not work
I wonder if there is a Cyanogen firmware in tar.md5 format so I can flash with odin ?
Click to expand...
Click to collapse
Did flash a incompatible kernel? Try flashing stock kernel, recovery adn ROM.
Hi.
My note bootloop after trying new kernel. Forgot the kernel bcoz it happen 3 months ago.
The issues:
1. Home button broken. So i cant go to recovery mode.
2. Try using adb reboot to recovery but device is not detected. My phone keep rebooting.
3. The phone can go to download mode only. (using usb jig)
4. Try flash stock rom, others kernel but the problem still.
im trying search for this problem but the solution only i must boot to recovery.
Sorry for my bad english.
Thanks.
mikagami29 said:
Hi.
My note bootloop after trying new kernel. Forgot the kernel bcoz it happen 3 months ago.
The issues:
1. Home button broken. So i cant go to recovery mode.
2. Try using adb reboot to recovery but device is not detected. My phone keep rebooting.
3. The phone can go to download mode only. (using usb jig)
4. Try flash stock rom, others kernel but the problem still.
im trying search for this problem but the solution only i must boot to recovery.
Sorry for my bad english.
Thanks.
Click to expand...
Click to collapse
after flashing stock rom using odin when device restarts remove usb jig and press home and volume plus to go to recovery mode.. then clear cache and dalvik cache .. tis should solve ur problem. tricky part is after completion of odin flash u have to quickly go to recovery using volume and home button once the flash is complete so that when device restarts u can go to recovery direct.