Database Develop

[tweak] improve 3d performance of lg p500 - updated

I started new thread with new libs here
this is libs were ported from xperia x8 section, as lg p500 n x8 has same adreno gpu this tweak works in both..
i tried it in oxygen rom 2.3.2 and Slimgen v1.5.1
it works it will improve 3d scores and improve game performance
Instructions:
1. Download New Adreno Libs
2. Remove libGLES_android.so from /system/lib/egl
3. Flash new adreno libs
4. Add this @ ur build.prop
Code:
Code:
debug.sf.hw=1
debug.composition.type=gpu
ro.secure=0
windowsmgr.max_events_per_sec=280
debug.performance.tuning=1
video.accelerate.hw=1
dalvik.vm.verify-bytecode=false
dalvik.vm.dexopt-data-only=1
persist.android.strictmode=0
ro.min_pointer_dur=1
5. Reboot, Enjoy
NOTE ; 1) PLS BACKUP before trying anything
2) i have tried it in only oxygen rom 2.3.2 and Slimgen v1.5.1
TO download New Adreno Libs and for screenshots and instructions with pictures see this link http://rk00064.blogspot.in/2012/03/improve-lg-optimus-one-p500-3d.html
This thread is on xda News , check this out http://www.xda-developers.com/android/tweak-for-lg-p500-increases-3d-graphics-performance/
say thanks to LtHuNTer_StepheN
Dont forget to press THANKS button
Visit RK world for everyone my blog for games, tweaks, gadgets, hacks, and more cool stuff
Also Like Facebook fan page

Anyone has tested it???
Sent from my LG-P500 using xda premium

This is very specific, you should mention that this only works on Gingerbread (I'm not sure about CyanogenMod, however)

guys i have tested it. After flashing it and changing build.prop , i got an antutu 3d score of about 676 and in neocore 62.9fps oc at 768mhz.... as i already mentioned i have tested it in oxygen n slimgen roms, it really works ...
u can try it , there is no harm in it...
I hope u ppl press THANKS button for this ... thank u

Tried it with latest nightly n gave me bootloop had to restore backup
Sent from my LG-P500 using xda premium

rk00064 said:
guys i have tested it. After flashing it and changing build.prop , i got an antutu 3d score of about 676 and in neocore 62.9fps oc at 768mhz.... as i already mentioned i have tested it in oxygen , NFE n slimgen roms, it really works ...
u can try it , there is no harm in it...
I hope u ppl press THANKS button for this ... thank u
Click to expand...
Click to collapse
You won't get the same score in antutu each time you run it. For all we know, your phone could have been at peak performance when you ran the test (meaning the score might decrease the next time you run antutu). Do you have any evidence (other than your antutu result) that is more reliable? Or is this just a placebo? Last question: this came from the xperia x8 thread. How do you know that it works on our phone without conflicting other parts of the phone?

sweetnsour said:
You won't get the same score in antutu each time you run it. For all we know, your phone could have been at peak performance when you ran the test (meaning the score might decrease the next time you run antutu). Do you have any evidence (other than your antutu result) that is more reliable? Or is this just a placebo? Last question: this came from the xperia x8 thread. How do you know that it works on our phone without conflicting other parts of the phone?
Click to expand...
Click to collapse
is it ok if i put some screenshots as evidence???

sweetnsour said:
You won't get the same score in antutu each time you run it. For all we know, your phone could have been at peak performance when you ran the test (meaning the score might decrease the next time you run antutu). Do you have any evidence (other than your antutu result) that is more reliable? Or is this just a placebo? Last question: this came from the xperia x8 thread. How do you know that it works on our phone without conflicting other parts of the phone?
Click to expand...
Click to collapse
yes sir it is really true in antutu we cant get constant scores everytime, but atleast we can use it to check the performance to some extent..
you can also check out neocore benchmark screenshots in the link,
I played gangster2 after adding this tweak, its really smooth at oc 710mhz...
its came from x8 thread , i have got an x8 after using this tweak with nAa kernel i got something around 700 in antutu, as both lg p500 and x8 has got same adreno 200 gpu, i tested it, it really worked, so i posted it on xda so that others could get some help from it...
sir, i'm new on xda, pls guide me this is my first post itself...
thank u...

I will check & revert tonight.
Sent from my LG-P500 using XDA

@OP.. had you tried it your self? what rom?
cause it gave me bootloop on nightly build

What if you do NOT add those build.props with new libs, or you add those build.props with original libs? How's the performance then?

Bec de Xorbin said:
What if you do NOT add those build.props with new libs, or you add those build.props with original libs? How's the performance then?
Click to expand...
Click to collapse
only libs - good changes performance
only build.prop - slight changes
libs+build.prop - massive..
Dont forget to press THANKS button

neko95 said:
@OP.. had you tried it your self? what rom?
cause it gave me bootloop on nightly build
Click to expand...
Click to collapse
ya i have tried, i works .... see that screeshots link which i have given...
i tried in oxygen 2.3.2 n slimgen....
not sure of nightly builds, bt bootloop problems may fixed by flashing franco's kernal , try it im not sure..
bt it really works in oxygen 2.3.2 n slimgen
Dont forget to press THANKS button

rk00064 said:
ya i have tried, i works .... see that screeshots link which i have given...
i tried in oxygen 2.3.2 n slimgen....
not sure of nightly builds, bt bootloop problems may fixed by flashing franco's kernal , try it im not sure..
bt it really works in oxygen 2.3.2 n slimgen
Dont forget to press THANKS button
Click to expand...
Click to collapse
ok.. slimgen had two versions.. one is based on Mik os 6.5.8 and nightly.. so which one is it you have tried?

neko95 said:
ok.. slimgen had two versions.. one is based on Mik os 6.5.8 and nightly.. so which one is it you have tried?
Click to expand...
Click to collapse
slimgen.sethpda-v1.3#18
also i flashed this kernel in the attachments

rk00064 said:
slimgen.sethpda-v1.3#18
also i flashed this kernel in the attachments
Click to expand...
Click to collapse
ok thanks.. why did you flash different kernel?

neko95 said:
ok thanks.. why did you flash different kernel?
Click to expand...
Click to collapse
simply tried, it increased performance
pls press THANKS button instead of saying it... thnk u

Some of those lines that have to be added to build.prop require to wipe dalvik cache before rebooting to have effect.
And no, I'm not going to press thanks

Yea I had franco kernel installed n I still got bootloop on nightly
Sent from my LG-P500 using xda premium

dalvik.vm.dexopt-flags=m=v,o=y seems to be the offendant line, removing it will allow me to boot fine, othewise i get a bootloop in CM nightlies... (wiping dalvik does not help..)
Even though it boots, it doesnt do justice in traditional benchs, neocore (61.7) and quadrant (1024) @748 performance, those are practically the same scores i usually get without this tweak...
havent tried antutu nor playing games yet...
BTW, theres kinda similar tweak in optimus black
http://forum.xda-developers.com/showthread.php?t=1323005

[Q] Use v6 supercharger and smurfed out on other roms

hello,
although the topic of supercharger says that it can be used in all kinds of roms i just want to make sure.
is it possible to use these 2 tweaks (now optional for sapphire) on roms like zeus/echelon/marvel?
i know the devs of these roms aply tweaks demselves so that's why i want to know. i can imagine that to much tweaks can be bad for the rom..
maybe it's possible but i won't gain much.
thanks in advance for the help

for me it helps a lot..
I am using marvel v4, and without the SManager applying the tweaks, the software has a certain lagg..
When I see at the screen "SManager has gained root acces", which means he is now activating the script, I see a reallly big difference in speed and battery consumption, in a positive way.
So my answer would be yes, definately. I recommend the script.

as we say in dutch, i am going to take on my bad shoes and just give it a try..
have a good backup so can always go back..

On this topic
What are the downsides of using v6supercharger if there are any?

I cant think of any..
Because the script only tweaks the build.prop if I'm correct, it just applies changes to make it faster and better for your battery.

duvee said:
I cant think of any..
Because the script only tweaks the build.prop if I'm correct, it just applies changes to make it faster and better for your battery.
Click to expand...
Click to collapse
V6 SuperCharger Does tweaks at systme/etc/init.d, build.prop and it changes the values for memorykiller and other mumbo jumbo, if you read the original thread for V6SC you can learn what are the things it does.

duvee said:
I cant think of any..
Because the script only tweaks the build.prop if I'm correct, it just applies changes to make it faster and better for your battery.
Click to expand...
Click to collapse
If it is so good...... Why LG, Samsung, etc. don't make the tweaks themselves?? Are they interested to keep users using laggy and poor-battery devices??? Why that??

Hehe.. why? Don't give the customer the best product but let them want more/better.. and you can't expect a flawless product for the price of an OB
Verstuurd van mijn LG-P970 met Tapatalk

today i tried v6 supercharger my handy fly now

handy?
i tried these two tweaks on Echelon but i didn't notice any difference..
The only difference is untutu benchmark.. it gave stable 2600/2650 on stock echelon.
after the tweaks the score went down to 2550/2600.
I also tried the tweaks on sapphire en there was definitly an increse of performance..
so it's just about the rom you use these tweaks on..
offcourse not so unusual because the most stock roms have allready been tweaked

Pollie81 said:
handy?
i tried these two tweaks on Echelon but i didn't notice any difference..
The only difference is untutu benchmark.. it gave stable 2600/2650 on stock echelon.
after the tweaks the score went down to 2550/2600.
I also tried the tweaks on sapphire en there was definitly an increse of performance..
so it's just about the rom you use these tweaks on..
offcourse not so unusual because the most stock roms have allready been tweaked
Click to expand...
Click to collapse
i tried it with my p970 on zeus v 5.03
points say nothing about the feeling

Psxmaster said:
i tried it with my p970 on zeus v 5.03
points say nothing about the feeling
Click to expand...
Click to collapse
i totally agree, but sometimes the difference is so little that it's hard to notice..
thats why i also do a benchmark.

which one is the bes Stock rom for gaming?

hi friendz..
can any one tell me which one is the best STOCK ROM for gaming(games like nfs,dead space...etc hd games..)
im using gingerDX v028 now but the dead space game in closing after sometime :crying::crying:
plzzzzz tell me mates....

For those games u mentioned : none of them
Playing those games with custom kernel & popular performance ROMs is a pain.(nearly impossible)
Now consider playing them with stock kernel under the hood.
Is it important how did i send this?

I'm not playing games so much, but you can try my ROM MV3,but it isn't uploaded yet. I think it's great for gaming!

http://forum.xda-developers.com/showthread.php?p=20698396
Have a look @ this thread...might be helpful
Is it important how did i send this?

2010matej said:
I'm not playing games so much, but you can try my ROM MV3,but it isn't uploaded yet. I think it's great for gaming!
Click to expand...
Click to collapse
He means Stock 2.1.1. Eclair rom is the best for gaming.
+ 1 to that. I also used a long time stock 2.1.1.C.0.0., enable everything using x8toolbox (it becomes almost like matej's rom) and do not forget to update Busybox to the latest, and SU to 3.1. Surprisingly, stock rom is the only one to support busybox bigger, like 19. The other roms still use old version and they brick if you try to update.
But still, there is another Rom with very good behaviour, and I think slightly better than stock in gaming, even I did not try all games: FroyoPro by Irakkarl. It scores better in Antutu as well, even if 2d is smaller, but the 3d values are close to 500 which is great.
Cheers,

elderduke said:
the 3d values are close to 500 which is great.
Cheers,
Click to expand...
Click to collapse
I have nearly 700 in 3D & it still sucks...
& i use busybox 1.19.4 & don't have any problems
BTW V 1.20.1 is available
Is it important how did i send this?

faraz_fireboy said:
I have nearly 700 in 3D & it still sucks...
& i use busybox 1.19.4 & don't have any problems
BTW V 1.20.1 is available
Is it important how did i send this?
Click to expand...
Click to collapse
wow...great values, but I'm sure on custom Kernel. I meant STOCK kernel.

elderduke said:
wow...great values, but I'm sure on custom Kernel. I meant STOCK kernel.
Click to expand...
Click to collapse
So u meant stock kernel...
Yeah that changes everything. But that won't chang the nature of our device... playing DEAD Space in x8?
No multi touch (not cypress)
Adreno 200
256 MB RAM
max 825 mhz armv6
3.0 inch display
That doesn't make sense 4 me
Is it important how did i send this?

yup, you would be right, but the issue here I think is a bit diferent (angle): is it working?
DEADSPACE runs in stock and also FroyoPro. All GB roms that I have tried FC. So at least it works. and that's stock [email protected], no OC...

elderduke said:
yup, you would be right, but the issue here I think is a bit diferent (angle): is it working?
DEADSPACE runs in stock and also FroyoPro. All GB roms that I have tried FC. So at least it works. and that's stock [email protected], no OC...
Click to expand...
Click to collapse
IS IT SMOOTH? NO LAGS?
coz i tried it before on minicm7 2.1.6 & it was working but so laggy
& i have synaptics :banghead:
Is it important how did i send this?

I have to say I have cypress and on my phone was working fine...did not play very much , though, only I was curious if it works. Oh and also that other game in Japanese with the Resident Evil caracters, I forgot the name, but it's a famous FPS....

elderduke said:
He means Stock 2.1.1. Eclair rom is the best for gaming.
+ 1 to that. I also used a long time stock 2.1.1.C.0.0., enable everything using x8toolbox (it becomes almost like matej's rom) and do not forget to update Busybox to the latest, and SU to 3.1. Surprisingly, stock rom is the only one to support busybox bigger, like 19. The other roms still use old version and they brick if you try to update.
But still, there is another Rom with very good behaviour, and I think slightly better than stock in gaming, even I did not try all games: FroyoPro by Irakkarl. It scores better in Antutu as well, even if 2d is smaller, but the 3d values are close to 500 which is great.
Cheers,
Click to expand...
Click to collapse
I have install busybox to latest 19. ...,but I can't install xrecovery then. So I install 18... and it's works.

I had everything installed by x8toolbox, including busybox 1.19.4 and dual recovery and it worked on stock....see that also new update for 1.20., did not try yet.

Please learn how to write the title,looks like a 9yrlod work
Sent from my E15i using xda app-developers app

[L7] - How to speed up system

Hi!
Developer of xda developers created aplication which eliminates 90% of the lags.
1. File Seeder 2.0 is available in this forum.
2. Copy this file to card SD and install by CWM.
3. Wipe cache and dalvik cache
4. Restart system.
Tested on my LG L7 [P700] Jelly Bean 4.1.2 root+CWM 6.0.2.8

What does it do exactly?

Enhanced performance system.

ah Seeder .. well it's really really good app ,if you dont wanna flash it there are also apk version available.

for rooted phone ?

It kills processes or???
Sent from my LG-P700 running on CM10.

Could you please reupload the file?

nobooody said:
Could you please reupload the file?
Click to expand...
Click to collapse
The apk can be found here
http://forum.xda-developers.com/showthread.php?t=1987032

seeder works well on my lg l7, it really works

Robot2345 said:
seeder works well on my lg l7, it really works
Click to expand...
Click to collapse
br aware what you are doing,,or else will brick your phone

Poland_Developers said:
Hi!
Developer of xda developers created aplication which eliminates 90% of the lags.
1. File Seeder 2.0 is available in this forum.
2. Copy this file to card SD and install by CWM.
3. Wipe cache and dalvik cache
4. Restart system.
Tested on my LG L7 [P700] Jelly Bean 4.1.2 root+CWM 6.0.2.8
Click to expand...
Click to collapse
seeder?? i tried it but i notice nothing
antutu return the same phone score
on my l5 it only use more battery...

Placebo effect
Swypnięte z L7 by Tapatalk Pro @ AOSP 4.4.2

I think better way to improve performance of our phone is installing custom ROM like Vanir AOSP (the fastest in my opinion)

pingwin114 said:
Placebo effect
Swypnięte z L7 by Tapatalk Pro @ AOSP 4.4.2
Click to expand...
Click to collapse
Completely agree, Seeder does nothing, it even slows down your phone…
___________________________________________________________
Phone : LG P-700 running Vanir 4.4.2 by bart452
Tablet : Asus Nexus 7 2013 stock rooted with Glitch Kernel.

From what it says in official thread I reckon it simply tweaks a couple of parameters. It might speed things up in the factory rom, but otherwise I wouldn't install it in a custom rom since it might conflict with the already implemented tweaks.

[MOD] Mackay Kernel 3.2 Modded for CM10 with GPS Fix

First of all, many thanks to Kasper_h for all your work.
This is a mod of Mackay's Kernel 3.0, designed to work with the offical CM10 stable. I've seen various posts about CM not working, so I put this mod togther to get a fully working CM10 based ROM based on the offical CM10 stable.
The advantages of CM10 over CM10.1
Video recording works
Skype Video Calling works
Barcode Scanning apps work
Burst mode camera apps work
Apps2SD works
Bluetooth File transfer (send/receive) works
GPS works
The disadvantages of CM10 over CM10.1
Code base is obsolete, so no more fixes/updates/features etc
Feels slightly less fluid/responsive than Mackays Rom
Feels slightly less stable than Mackays Rom
This has the standard CM10 ramdisk, modified to include Kasper_h's GPS Fix, along with Mackay's Kernel 3.0 zimage (unmodified).
See Kasper_H's original thread here: http://forum.xda-developers.com/showthread.php?t=2153164
Kasper_h's kernel source here: https://github.com/kasperhettinga/lge-kernel-sniper
Get the CM10 stable from here: http://get.cm/?device=p970
Get the Google apps for 4.1.x from here: http://goo.im/gapps
How to Install
1. Reboot to recovery
2. Wipe data/factory reset
3. Install CM10 stable
4. Install Gapps for 4.1.x
5. Install P970-MackayKernel-3.0-Mod-for-CM10-GPS-Fix (attached to this post)
6. Reboot
Issues
1. In about phone, kernel version is shown as unavailable, but shows correctly in CPUSpy
2. If you enable Kernel Same Page Merging (in settings/Performance/Memory) it will cause occasional reboots/screen locks.
3. Very occasional vibration lock, lasting 30-40 seconds, so just wait if that happens. To avoid, disable Vibrate on Touch in settings/sound
4. Video recording with the CM10 camera crashes (still photo and gallery is fine), download Ucam Ultra https://play.google.com/store/apps/details?id=com.ucamera.ucam&hl=en for issue free video recording
Enjoy
Edit: Updated Mackay Kernel to 3.1
Edited 26/8/13: Updated Mackay Kernel to 3.2
Edited 28/10/13: Uploaded Mackey Kernel 1.9, which seems to fix the random rebooting bug, vibration bug and fixes a couple of games that didn't work on the 3.2 Kernel

It's not working on CM10.1? Could be fixed in that case?
Thanks for your work.

Mexickano said:
It's not working on CM10.1? Could be fixed in that case?
Thanks for your work.
Click to expand...
Click to collapse
Use Mackay ROM, it has this kernel included, or get the kernel from Mackay's thread. It will work with CM10.1.
The kernel in this thread has been modified for CM10.

Kernel 3.1 came out with fixes on vsync.Saves battery and improving performance
Sent from my LG-P970 using Tapatalk 4

TMinh said:
Use Mackay ROM, it has this kernel included, or get the kernel from Mackay's thread. It will work with CM10.1.
The kernel in this thread has been modified for CM10.
Click to expand...
Click to collapse
Kernel from Mackay's ROM have this
The advantages of CM10 over CM10.1
Video recording works
Skype Video Calling works
Barcode Scanning apps work
Burst mode camera apps work
Apps2SD works
Bluetooth File transfer (send/receive) works
GPS works
Click to expand...
Click to collapse
anyway thanks for make it more clear.

Question : cpu governor & i/o schedule in ur kasper_h's kernel mod have same original mackay kernel 3.0.8x ??
Sent from my LG-P970 using Tapatalk 2

jobzsparrow said:
Question : cpu governor & i/o schedule in ur kasper_h's kernel mod have same original mackay kernel 3.0.8x ??
Click to expand...
Click to collapse
Yes, its the same kernel, its the ramdisk that's diferent in this mod.

using with Kernel same page still not found problem (2.)
Sent from my LG-P970 using Tapatalk 2

@jason600 can you update the kernel to the latest one ( v3.1 ) ? Thanks :highfive:

DaemonOnx said:
@jason600 can you update the kernel to the latest one ( v3.1 ) ? Thanks :highfive:
Click to expand...
Click to collapse
Currenty testing 3.1 at the moment, as long as I don't find any serious issues, I'll upload it tomorrow.
Edit: Updated to Mackay Kernel 3.1, see attachment in first post.

yo!! good work , i'm installing
ps. this mod have got grant from kasper_h ?
Sent from my LG-P970 using Tapatalk 2

jobzsparrow said:
yo!! good work , i'm installing
ps. this mod have got grant from kasper_h ?
Sent from my LG-P970 using Tapatalk 2
Click to expand...
Click to collapse
Do you mean did I ask kasper_h for permission before doing this mod? Then the answer is no. Kasper_h has stated in the mackay thread he would not do a CM10 version, because of this I considered it would be ok provided it was fully credited to him, which I have done.
If kasper_h is unhappy with this mod for any reason, I'll take it down at once.

jason600 said:
Do you mean did I ask kasper_h for permission before doing this mod? Then the answer is no. Kasper_h has stated in the mackay thread he would not do a CM10 version, because of this I considered it would be ok provided it was fully credited to him, which I have done.
If kasper_h is unhappy with this mod for any reason, I'll take it down at once.
Click to expand...
Click to collapse
Let me answer this one myself, easiest I guess
As I have said in my own thread, I am perfectly happy with people using my work. That is what opensource is about: people improving each-others work And as said in the quoted post, I also said that I will not work on a CM10 version of the kernel, but that I am happy to support others who want to port the kernel to CM10.

kasper_h said:
Let me answer this one myself, easiest I guess
As I have said in my own thread, I am perfectly happy with people using my work. That is what opensource is about: people improving each-others work And as said in the quoted post, I also said that I will not work on a CM10 version of the kernel, but that I am happy to support others who want to port the kernel to CM10.
Click to expand...
Click to collapse
Thanks for that kasper, and my apologies for not asking beforehand, which with hindsight, I should of done.

both pretty Developers :thumbup:
Sent from my LG-P970 using Tapatalk 2

kasper_h said:
Let me answer this one myself, easiest I guess
As I have said in my own thread, I am perfectly happy with people using my work. That is what opensource is about: people improving each-others work And as said in the quoted post, I also said that I will not work on a CM10 version of the kernel, but that I am happy to support others who want to port the kernel to CM10.
Click to expand...
Click to collapse
Kasper Hettinga(Apologies if spelt incorrectly)You are a good man,You should have applied for Recognized Developer if not Contributer.You totally deserve it for the magical works you have done.If I could I would have bought you a sack of coffee beanz.Good man.
Sent from my LG-P970 using Tapatalk 4
---------- Post added at 11:06 PM ---------- Previous post was at 11:03 PM ----------
Please fix the KSM bug as I want/need to use that feature ,thanks
Sent from my LG-P970 using Tapatalk 4

BlackPie said:
Kasper Hettinga(Apologies if spelt incorrectly)You are a good man,You should have applied for Recognized Developer if not Contributer.You totally deserve it for the magical works you have done.If I could I would have bought you a sack of coffee beanz.Good man.
Sent from my LG-P970 using Tapatalk 4
Click to expand...
Click to collapse
If you look closely you see that it says "Recognised Developer" under his name :silly:

RomWiz said:
If you look closely you see that it says "Recognised Developer" under his name :silly:
Click to expand...
Click to collapse
Oh.I must have missed that
Sent from my LG-P970 using Tapatalk 4

BlackPie said:
Please fix the KSM bug as I want/need to use that feature ,thanks
Click to expand...
Click to collapse
Firstly, KSM works, but the bug might cause occasional reboots (maybe once per day)
Secondly, although Kernel Samepage Merging helps reduce ram usage, the effect is not that dramatic.
If you having memory problems, try the following:
1. Disable JIT. No noticable performance drop and each running process uses a few less mb's of ram. With lots of running apps, this adds up. To disable JIT, add the following line to your build.prop:
Code:
dalvik.vm.execution-mode=int:fast
2. Install Greenify https://play.google.com/store/apps/details?id=com.oasisfeng.greenify&hl=en and hibernate apps that run in the background.
3. Install a 200mb swap file on the system partition (much faster than the sd card). You'll be able to load virtally any game/large app. Download Turbo Boost http://forum.xda-developers.com/showthread.php?t=2145133 and extract it on your pc. For a 200mb swap on system copy the file from TURBO BOOST MOD v3.02-AROMA\swap\system\200\etc\init.d\98swap_system_v300 and put it in /etc/init.d on your phone, then reboot. The swap file is created automatically.
4. Install V6 Supercharger http://forum.xda-developers.com/showthread.php?t=991276

Version 3.1 doesn't boot for me, while 3.0 does just fine.