Hi,
So recently KitKat is released for AT&T Moto X's. Excited, I decided to upgrade the phone to KitKat.
I was previously rooted with RockMyMoto, and before updating to KitKat, I went to unroot the phone through the SuperSU app that was installed.
As I was unsure if it was really unrooted, I opened up Titanium Backup (which required root) and it popped up with an error that Titanium Backup wouldn't work because my device was not rooted.
So with this confirmation (a really noob way to check), I went ahead to download the update through the default system settings app. After the download, I proceeded to install it.
Before installing the update, it said the phone will shut down and proceed with the update, which takes around 20 minutes, and it will be done once it boots up again. And this is where the problem comes. After the phone switched off, the phone just reboots immediately, as if it was just restarting. And after 30 seconds or so, the phone switches off and restarts again. Initially, I thought this was normal, but it kept on restarting and I knew something was up.
I don't know what to do now. I have tried holding down the volume buttons and power button to reboot into recovery, but every time I select the recovery option, the phone just reboots like normal and does not reboot to recovery. I even tried to "race against time" and restore my phone through settings app, but it doesn't allow me to.
What can I do? Please help me
I looked up on the internet, and it seems that I have to remove the OTA cache from the cache folder, but how can I do it? I don;t have root access anymore...
EDIT: FIXED, PLEASE DELETE
darylbu said:
Hi,
So recently KitKat is released for AT&T Moto X's. Excited, I decided to upgrade the phone to KitKat.
I was previously rooted with RockMyMoto, and before updating to KitKat, I went to unroot the phone through the SuperSU app that was installed.
As I was unsure if it was really unrooted, I opened up Titanium Backup (which required root) and it popped up with an error that Titanium Backup wouldn't work because my device was not rooted.
So with this confirmation (a really noob way to check), I went ahead to download the update through the default system settings app. After the download, I proceeded to install it.
Before installing the update, it said the phone will shut down and proceed with the update, which takes around 20 minutes, and it will be done once it boots up again. And this is where the problem comes. After the phone switched off, the phone just reboots immediately, as if it was just restarting. And after 30 seconds or so, the phone switches off and restarts again. Initially, I thought this was normal, but it kept on restarting and I knew something was up.
I don't know what to do now. I have tried holding down the volume buttons and power button to reboot into recovery, but every time I select the recovery option, the phone just reboots like normal and does not reboot to recovery. I even tried to "race against time" and restore my phone through settings app, but it doesn't allow me to.
What can I do? Please help me
I looked up on the internet, and it seems that I have to remove the OTA cache from the cache folder, but how can I do it? I don;t have root access anymore...
EDIT: FIXED, PLEASE DELETE
Click to expand...
Click to collapse
How did you fix it?
I am having this very same problem. My phone just today went into boot loop. Running KangKat on unlocked 1053 with Faux kernel. No boot logo or anything. The phone just vibrates then after 30 seconds or so, it vibrates again. It does this non-stop.
I can plug my phone into USB and the phone's contents come up on my computer, but I can't get the screen to turn on!! Any ideas?
Recovery
Globalrebel said:
I am having this very same problem. My phone just today went into boot loop. Running KangKat on unlocked 1053 with Faux kernel. No boot logo or anything. The phone just vibrates then after 30 seconds or so, it vibrates again. It does this non-stop.
I can plug my phone into USB and the phone's contents come up on my computer, but I can't get the screen to turn on!! Any ideas?
Click to expand...
Click to collapse
Are you able to hold power + volume to get in to your recovery?
Then you can reinstall your nandroid. Or, then you can flash a different rom.
MikeNaples said:
Are you able to hold power + volume to get in to your recovery?
Then you can reinstall your nandroid. Or, then you can flash a different rom.
Click to expand...
Click to collapse
Or he can also boot into bootloader with adb by doing adb reboot bootloader then typing fastboot erase cache
serophia said:
Or he can also boot into bootloader with adb by doing adb reboot bootloader then typing fastboot erase cache
Click to expand...
Click to collapse
This process seems to work quite well.
I'd recommend to use MFastboot. With your phone off, you can boot into fastboot by holding power and volume down for a few seconds, release and it will boot into fastboot. Connect the usb cable, and first try "fastboot erase cache". If that doesn't work by itself, repeat the process but also use "fastboot erase userdata" (THIS WILL ERASE ALL YOUR DATA!) but at least there is a chance you might get it to boot normally. It´s like a factory reset, you will have to start from scratch.
I know my answer is out of date but it might be useful for someone coming for this same solution.
Moto x Stuck in TWRP loop
pls help me guys it just goes on restarting it dose not even goes in recovery mode
Guys.. I got struck at unlocked boot loader. Flashed TWRP on 5.1 ( GB retail rom). And its not booting now and not able to flash any rom.. kindly Help...!!!
C6603 Stuck in bootloop! [Last update: 24/1/14]
UPDATE 24/01/14
This issue has been SOLVED.
I replaced the battery with one from eBay and the phone is working flawlessly, all the ROM flashing I went through was not the problem at all. Remember that if you are going to try to replace the battery you may as well buy a new rear glass piece as it is almost guaranteed that the glass will break in the removal process. You will also require new a adhesive piece. The entire procedure cost me $51AUD (battery, glass, adhesive).
All the content below is irrelevant, if your phone randomly shuts off (instantaneously) on boot or soon after, try to replace your battery!
Thanks for your help.
I've got quite a story to tell and if you have the patience to read it, I will greatly appreciate your assistance. TL;DR BELOW
In the beginning I was running 4.2.2, on a stock Australian 10.3.A.0.423 Unbranded ftf. It had been working flawlessly for a month or so until quite recently. It had developed a problem where it would only remain switched on whilst being plugged into the wall socket. As soon as (or thereafter) I removed the plug out of the phone, with one touch, one action, BAM! The display was off and I had to restart the phone again. I spent a few hours browsing for solutions to this problem, most of them said to hold the power and vol+ buttons until the handset vibrated 3 times. That turned it off alright, but I'm looking to go in the other direction.
After a stressful while scrounging old forum posts, I came to the conclusion that the fault is in my ROM, after all, I had flashed from 4.1.2 (I think) to 4.2.2 just a month prior (I flashed a ROM instead of waiting until the snail-like carriers here in Australia decided to dribble out the release). So now being convinced that I ROM is at fault I browse XDA for a newer stock one. Hey! Look! 4.3 it being rolled out in Aust, I check whether it's available to me yet, and obviously, no, it is not. I stumble upon this thread in my travels. I spend a while working to meet it's requirements. Get flashtool, get unlocked bootloader, get root, install cwm, and attempt to install XzDualRecovery 2.6. I've placed the XDR.zip on the sdcard in the XZ, I run the zip using CWM, it seems successful, I then go to reboot and check whether my 4.3 works, after I select reboot I'm asked whether I wish to root the phone. Why yes! that seems easy enough, and just as I select 'ok' the screen goes blank. The bloody phone has switched off in the middle of my work! I try to boot and it hangs on the Sony logo then reboots, creating a cycle. I decide to plug it back in to the wall socket (as this is the only way to get it to boot and remain on), huzzah, it runs. But the root had failed. The rest of my rant is insignificant until now (around 7 hours of failed attempts later)
So in an attempt to keep this wall of text down, I try my best to summarize, If I am not clear enough, just say.
I tried reflashing my old 4.2.2 ROM back, this makes the whole thing worse, now the phone won't even get past the Sony logo (even when plugged to a socket), I flash a different 4.3 ftf, nothing, I restore with PCC, I restore with SUS, I create a ftf from the SUS files and attempt to flash that. Nothing, nothing works. So where am I at now?
The phone still has battery, although, I'm not sure how much, I can no longer get it to charge as it hangs on the Sony logo. The phone should be flashed with 10.3.A.0.423, but when I check the baseband version in Fastboot cmd prompt, it still says 10.4.B.0.569, I feel as though flashtool isn't flashing properly, but I've read that this is usually a non-issue. I can boot into flashmode and fastboot mode. I can unlock and lock the bootloader. I can use ADB and Fastboot CMD (Minimal version) to read values and run commands. Actually, I managed to use the phone in fastboot mode, in conjunction with ADB and Fastboot CMD, I ran the command "fastboot continue" and the phone went on to charge off the usb power, It didn't seem to charge very fast, or at all, and I haven't been able to get it to do it again. So a TL;DR:
-C6603 stuck in bootloop.
-Possibly has a 4.2.2 ROM installed (10.3.A.0.423 Unbranded AU)
-Cannot Charge
-Can run flashmode and fastboot mode
-Can use ADB and Fastboot
-Can use SUS, PCC, and Flashtool to flash stock roms
-Can't figure this out for the life of me!
UPDATE 01/01/14
Currently I have a kernel installed that allows me to use cwm twrp (doomkernel v19, maybe), I have flashed a 'flashable' stock 4.3 rom using cwm and the phone didn't manage to get past the kernel logo. HOWEVER, using fastboot mode, I run the command "fastboot continue", and if I allow the phone to go past the kernel logo it vibrates, the LED turns green as opposed to showing a purple one, and it will begin charging (The LED isn't green as a result of the battery level). EDIT [1/1/14 3:01AM]: I tried to launch the phone whilst it was charging, the charging symbol went away and the phone remained on a black screen (lcd is on, but nothing is displayed) for a few seconds before shutting off automatically.
I must mention, I cannot get into recovery unless I boot the phone into fastboot mode, run the command in fastboot: "fastboot continue". If I don't do this, it simply crashes (shuts off) when showing the kernel logo.
If you need to know more I will provide as much information as I can, as succinct as I can, as fast as I can. I am in this for the long run. Thank you for your time,
UPDATE 08/01/14
I've come to the conclusion that my issue is battery related. After repeated from flashes and fastboot attempts, I managed to get the phone charging a few times, I witnessed the level was sporadic upon infrequent viewings. I have come across a few other very similar threads and feel that it is necessary to try replacing the battery, I try and post a youtube clip that details what happens currently.
Keringkien
keringkien said:
C6603 Stuck in bootloop!
I've got quite a story to tell and if you have the patience to read it, I will greatly appreciate your assistance. TL;DR BELOW
In the beginning I was running 4.2.2, on a stock Australian 10.3.A.0.423 Unbranded ftf. It had been working flawlessly for a month or so until quite recently. It had developed a problem where it would only remain switched on whilst being plugged into the wall socket. As soon as (or thereafter) I removed the plug out of the phone, with one touch, one action, BAM! The display was off and I had to restart the phone again. I spent a few hours browsing for solutions to this problem, most of them said to hold the power and vol+ buttons until the handset vibrated 3 times. That turned it off alright, but I'm looking to go in the other direction.
After a stressful while scrounging old forum posts, I came to the conclusion that the fault is in my ROM, after all, I had flashed from 4.1.2 (I think) to 4.2.2 just a month prior (I flashed a ROM instead of waiting until the snail-like carriers here in Australia decided to dribble out the release). So now being convinced that I ROM is at fault I browse XDA for a newer stock one. Hey! Look! 4.3 it being rolled out in Aust, I check whether it's available to me yet, and obviously, no, it is not. I stumble upon this thread in my travels. I spend a while working to meet it's requirements. Get flashtool, get unlocked bootloader, get root, install cwm, and attempt to install XzDualRecovery 2.6. I've placed the XDR.zip on the sdcard in the XZ, I run the zip using CWM, it seems successful, I then go to reboot and check whether my 4.3 works, after I select reboot I'm asked whether I wish to root the phone. Why yes! that seems easy enough, and just as I select 'ok' the screen goes blank. The bloody phone has switched off in the middle of my work! I try to boot and it hangs on the Sony logo then reboots, creating a cycle. I decide to plug it back in to the wall socket (as this is the only way to get it to boot and remain on), huzzah, it runs. But the root had failed. The rest of my rant is insignificant until now (around 7 hours of failed attempts later)
So in an attempt to keep this wall of text down, I try my best to summarize, If I am not clear enough, just say.
I tried reflashing my old 4.2.2 ROM back, this makes the whole thing worse, now the phone won't even get past the Sony logo (even when plugged to a socket), I flash a different 4.3 ftf, nothing, I restore with PCC, I restore with SUS, I create a ftf from the SUS files and attempt to flash that. Nothing, nothing works. So where am I at now?
The phone still has battery, although, I'm not sure how much, I can no longer get it to charge as it hangs on the Sony logo. The phone should be flashed with 10.3.A.0.423, but when I check the baseband version in Fastboot cmd prompt, it still says 10.4.B.0.569, I feel as though flashtool isn't flashing properly, but I've read that this is usually a non-issue. I can boot into flashmode and fastboot mode. I can unlock and lock the bootloader. I can use ADB and Fastboot CMD (Minimal version) to read values and run commands. Actually, I managed to use the phone in fastboot mode, in conjunction with ADB and Fastboot CMD, I ran the command "fastboot continue" and the phone went on to charge off the usb power, It didn't seem to charge very fast, or at all, and I haven't been able to get it to do it again. So a TL;DR:
-C6603 stuck in bootloop.
-Possibly has a 4.2.2 ROM installed (10.3.A.0.423 Unbranded AU)
-Cannot Charge
-Can run flashmode and fastboot mode
-Can use ADB and Fastboot
-Can use SUS, PCC, and Flashtool to flash stock roms
-Can't figure this out for the life of me!
If you need to know more I will provide as much information as I can, as succinct as I can, as fast as I can. I am in this for the long run. Thank you for your time,
Keringkien
Click to expand...
Click to collapse
download any FTF , 4.2.2 or 4.3 , connect your device to flash tool as flashmode , and select to flash the ftf , when you are selecting the ftf in the flash tool , at the right side check all at the wipe section , and uncheck all at the exclude section
but your internal storage might get also wiped , but i assume it already happened when you unlocked your boot loader
elias234 said:
download any FTF , 4.2.2 or 4.3 , connect your device to flash tool as flashmode , and select to flash the ftf , when you are selecting the ftf in the flash tool , at the right side check all at the wipe section , and uncheck all at the exclude section
but your internal storage might get also wiped , but i assume it already happened when you unlocked your boot loader
Click to expand...
Click to collapse
Alrighty then, I'll give that a go later. I have just found a 4.3 for Australia, perhaps it will be different. Thanks for the quick reply.
keringkien said:
Alrighty then, I'll give that a go later. I have just found a 4.3 for Australia, perhaps it will be different. Thanks for the quick reply.
Click to expand...
Click to collapse
this thread could be helpful : http://forum.xda-developers.com/showthread.php?t=2229250
i'm not sure if that problem could be solve, but it was, like you said, different. never saw anything like that either.
Anyway:
Can it boot into custom recovery in its state now?( for mounting storage for something else in case you have cwm or twrp installed)
Jambu95 said:
this thread could be helpful : http://forum.xda-developers.com/showthread.php?t=2229250
i'm not sure if that problem could be solve, but it was, like you said, different. never saw anything like that either.
Anyway:
Can it boot into custom recovery in its state now?( for mounting storage for something else in case you have cwm or twrp installed)
Click to expand...
Click to collapse
Thanks so much for the reply. The thread has something I can try, if this new rom fails (I expect it will). What is custom recovery? I cannot access the storage, only fastboot and flashmode. no cwm and xdr was never completed.
ROM just failed, trying SUS now.
keringkien said:
Thanks so much for the reply. The thread has something I can try, if this new rom fails (I expect it will). What is custom recovery? I cannot access the storage, only fastboot and flashmode. no cwm and xdr was never completed.
ROM just failed, trying SUS now.
Click to expand...
Click to collapse
oh dear, custom recovery is cwm (clockworkmod recovery) or twrp (team win recovery project), it means, it allows you to do something important just before it boot into system, which is bootstall or bootloop as you call it. you cannot boot into system, then try to boot into recovery ( which is before it boot the system), that might help.
both recoveries will allow you to mount storage to copy things to sd cards from pc.
you can try unlock bootloader and flash custom kernel with recoveries, maybe you "could" boot into one of those recoveries.
I also got the same problem, but mine is a C6602. I was trying to setup a mail exchange, then it asked for some permission. I push enter, then after an hour, it start the bootloop.
The phone boot till the main screen, i could swipe and play around for 10 second, then it reboot.
I have tried everything from hard reset, to FlashTool to SUS, relock, unlock, flash stock, from old stock to new stock, it just won't work :|
Jambu95 said:
oh dear, custom recovery is cwm (clockworkmod recovery) or twrp (team win recovery project), it means, it allows you to do something important just before it boot into system, which is bootstall or bootloop as you call it. you cannot boot into system, then try to boot into recovery ( which is before it boot the system), that might help.
both recoveries will allow you to mount storage to copy things to sd cards from pc.
you can try unlock bootloader and flash custom kernel with recoveries, maybe you "could" boot into one of those recoveries.
Click to expand...
Click to collapse
I'm well aware what cwm is, I just assumed that because you said 'custom' that it might possibly be different, as recovery is always custom anyway, sorry for the misunderstanding.
I am able to flash a 'boot.img' that enables me to use cwm and twrp, HOWEVER, the only way I can access it (as in cause the phone to remain on long enough for it to parse the boot.img) is to connect the phone to my computer in fastboot mode, then using the Fastboot command: "fastboot continue", it will run the 'img' and allow me to enter twrp or cwm. It still won't begin charging or even show the Xperia logo if I allow it to continue without accessing the recovery options.
Thanks for your help.
keringkien said:
I'm well aware what cwm is, I just assumed that because you said 'custom' that it might possibly be different, as recovery is always custom anyway, sorry for the misunderstanding.
I am able to flash a 'boot.img' that enables me to use cwm and twrp, HOWEVER, the only way I can access it (as in cause the phone to remain on long enough for it to parse the boot.img) is to connect the phone to my computer in fastboot mode, then using the Fastboot command: "fastboot continue", it will run the 'img' and allow me to enter twrp or cwm. It still won't begin charging or even show the Xperia logo if I allow it to continue without accessing the recovery options.
Thanks for your help.
Click to expand...
Click to collapse
if you can mount the storage, you could copy the flashable stock rom (4.3) and copy it into your sd card, and maybe you can flash through there by following instructions from that thread.
---------- Post added at 11:21 PM ---------- Previous post was at 11:20 PM ----------
billhainh said:
I also got the same problem, but mine is a C6602. I was trying to setup a mail exchange, then it asked for some permission. I push enter, then after an hour, it start the bootloop.
The phone boot till the main screen, i could swipe and play around for 10 second, then it reboot.
I have tried everything from hard reset, to FlashTool to SUS, relock, unlock, flash stock, from old stock to new stock, it just won't work :|
Click to expand...
Click to collapse
look for the disaster recovery thread i posted above
Jambu95 said:
if you can mount the storage, you could copy the flashable stock rom (4.3) and copy it into your sd card, and maybe you can flash through there by following instructions from that thread.
---------- Post added at 11:21 PM ---------- Previous post was at 11:20 PM ----------
Click to expand...
Click to collapse
I tried to mount the storage, my pc wouldn't detect the phones storage, I managed to push the stock rom zip to the sd card using ADB. I still had cwm recovery and could flash the zip using it. Still, however, the phone shuts down before it gets past the kernel logo. Again, I used the phone in Fastboot mode and forced it to continue using "fastboot continue", I left it go past the kernel logo and it is charging at the moment. I may try to start the phone now, yet expect it to crash again.
EDIT: I tried to launch the phone whilst it was charging, the charging symbol went away and the phone remained on a black screen (lcd is on, but nothing is displayed) for a few seconds before shutting off automatically.
EDIT: Happy New Year!
Thank you.
keringkien said:
I tried to mount the storage, my pc wouldn't detect the phones storage, I managed to push the stock rom zip to the sd card using ADB. I still had cwm recovery and could flash the zip using it. Still, however, the phone shuts down before it gets past the kernel logo. Again, I used the phone in Fastboot mode and forced it to continue using "fastboot continue", I left it go past the kernel logo and it is charging at the moment. I may try to start the phone now, yet expect it to crash again.
EDIT: I tried to launch the phone whilst it was charging, the charging symbol went away and the phone remained on a black screen (lcd is on, but nothing is displayed) for a few seconds before shutting off automatically.
EDIT: Happy New Year!
Thank you.
Click to expand...
Click to collapse
this problem occurs with every kernel you've used (including stock and custom kernels)?
Jambu95 said:
this problem occurs with every kernel you've used (including stock and custom kernels)?
Click to expand...
Click to collapse
Yes that is correct, it's current issue (turning off sponanteously) occurred when I was running stock 4.2.2 (no root, no bootloader unlock).
keringkien said:
Yes that is correct, it's current issue (turning off sponanteously) occurred when I was running stock 4.2.2 (no root, no bootloader unlock).
Click to expand...
Click to collapse
lol, you should unlock the bootloader before you flash a custom boot.img. the primary solution now is to flash any rom to see if it boots up normally , then you can still find a way to revert back to stock.
Jambu95 said:
lol, you should unlock the bootloader before you flash a custom boot.img. the primary solution now is to flash any rom to see if it boots up normally , then you can still find a way to revert back to stock.
Click to expand...
Click to collapse
I never said that I flashed a custom boot.img whilst on a locked bootloader. The reason I tried all the things that I have is because the phone was spontaneously shutting down (on stock, unedited). Perhaps once I made the mistake of flashing a boot.img before unlocking, but I have since unlocked and flashed many roms and kernels. Thanks for your reply.
keringkien said:
I never said that I flashed a custom boot.img whilst on a locked bootloader. The reason I tried all the things that I have is because the phone was spontaneously shutting down (on stock, unedited). Perhaps once I made the mistake of flashing a boot.img before unlocking, but I have since unlocked and flashed many roms and kernels. Thanks for your reply.
Click to expand...
Click to collapse
the device can't get pass the sony logo?
edNHour consum
Jambu95 said:
the device can't get pass the sony logo?
Click to expand...
Click to collapse
That is correct, it doesn't hang but suddenly turns off, the only way I can use recovery tools in the kernel is if I plug the phone into my pc in Fastboot mode, then issue the command "fastboot continue" from cmd.
keringkien said:
That is correct, it doesn't hang but suddenly turns off, the only way I can use recovery tools in the kernel is if I plug the phone into my pc in Fastboot mode, then issue the command "fastboot continue" from cmd.
Click to expand...
Click to collapse
i think there is something wrong with your motherboard or the battery connection, i'm not sure, because my pc got that problem before, it just boot up to starting windows... and then reboot, in the end i found out the capacitor got swelled in the power supply.
Jambu95 said:
i think there is something wrong with your motherboard or the battery connection, i'm not sure, because my pc got that problem before, it just boot up to starting windows... and then reboot, in the end i found out the capacitor got swelled in the power supply.
Click to expand...
Click to collapse
That is certainly possible, I have had to replace the back glass and during that operation it is possible that the battery got too hot and is now lower in voltage or something. Thanks for the suggestion, I would appreciate a second opinion with this...
Thank you.
keringkien said:
That is certainly possible, I have had to replace the back glass and during that operation it is possible that the battery got too hot and is now lower in voltage or something. Thanks for the suggestion, I would appreciate a second opinion with this...
Thank you.
Click to expand...
Click to collapse
if you still have your warranty, you can go to the center and request for a replacement, the best solution now is to revert to as stock as possible, if can get the bootloader locked again then it's good,
Jambu95 said:
if you still have your warranty, you can go to the center and request for a replacement, the best solution now is to revert to as stock as possible, if can get the bootloader locked again then it's good,
Click to expand...
Click to collapse
I imagine it is still under warranty, however I have read that unlocking the bootloader permanently voids warranty. And I have replaced the back of my white phone with a black glass, perhaps if I get a new white rear glass it will be ok, but then I might as well just replace the battery $40AUD isn't too expensive IMO.
My motorola Nexus 6 won't turn on, when I try to power it on, it shows the Google sign then shuts off immediately. When I plug in the charger from a complete power off, the white battery sign keeps flashing, it shows for 1 second then shuts off then repeats the cycle of showing the battery sign then shutting off. It boots into bootloader/fastboot mode fine, and I have tried flashing the factory image, it flashes fine but it still shuts off immediately while showing the google sign. It won't even boot into recovery after the flash, it just shuts off after the google sign. This isn't my first nexus, in know that flashing factory image should fix 99% of issues. Please help.
P.S I didn't purchase officially from google or Motorola, bought it from a guy who claimed he bricked it trying to install a font pack so I figured let me buy it and restore factory image. Didn't work. I tried flashing manually, the process went fine, but it it still turns off at google splash image. I tried Wugfresh toolkit also to no avail. He said he rooted it, installed custom recovery and euphoria os rom. Then he installed the fontpack, it told him to reboot to apply changes, and it wouldn't boot past google screen after that. It doesnt even get to the boot animation. It just shuts off. When its off and u plug in the charger it does the same thing, you just keep seeing the charging symbol over and over because its constantly rebooting. Its a T-Mobile Nexus 6 BTW, model number XT1103. I spoke to my friend who has a local repair shop and he says there is nothing out for his z3x or his other boxes for the nexus 6 because it is such a new and rare device. His theory is that the partition tables have been corrupted somehow and need to be rewritten manually. Please any help would be appreciated. I can promise a hefty $$ reward for any individual that helps me recover it to a working state.
can you get a custom recovery on successfully.........?
did you flash the stock image manually?
mediaman123 said:
can you get a custom recovery on successfully.........?
did you flash the stock image manually?
Click to expand...
Click to collapse
Yes I tried pushing the stock recovery individually and it succeeded in the command prompt, but won't enter recovery, just shows google and shuts off. I tried pushing twrp too but same outcome. Yes I had flashed the stock image manually, everything flashed well from what the command promt said, but when it should reboot to recovery after flash to wipe, just shuts off.
jeromechrome1 said:
Yes I tried pushing the stock recovery individually and it succeeded in the command prompt, but won't enter recovery, just shows google and shuts off. I tried pushing twrp too but same outcome. Yes I had flashed the stock image manually, everything flashed well from what the command promt said, but when it should reboot to recovery after flash to wipe, just shuts off.
Click to expand...
Click to collapse
Please! Anyone!
by manually do you mean flashing all the separate parts of the stock image separately, system, boot, recovery, cache and so on..........
I don't know what else to do after going through with that process.....
Make sure you have the latest fastboot by updating SDK Manager. Then reflash bootloader then reboot back to bootloader to reset. Then proceed to flash each partition again. Directions below.
fastboot flash bootloader bootloader.img <-- rename bootloader to this to make it easier
fastboot flash radio radio.img <--- again rename to make easier
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash recovery recovery.img
fasyboot flash system system.img
Hope this helps.
I'm a total newb here so take what I tell you with a grain of salt. I had your exact same problem on my Nexus 5. Every single thing you just described is what happened to my N5. And just like your N6...I was able to boot up into recovery (stock and TWRP), I was able to flash all the things manually and even used Wug's NRT. But then whenever I tried to actually boot up the device it could never pass the Google logo....basically EVERYTHING THAT IS HAPPENING TO YOU.
What I did to fix everything? Changed my battery. Sounds stupid and totally irrelevant but that did the trick. When I opened up my phone I noticed my battery had a nasty bulge and realized it was defective. Bought a new one for $25 and have never had any issues ever since. I suggest you look at your battery and see if that is the root of your problem. I have heard of the N6 having some batteries expanding and causing the back covers to pop off...this could be related to your problem.
Like I said I am a newb and thought I'd share my experience in the hopes it solves your problem.
Good luck buddy! :good:
my N6 is actually away getting repaired for the exact issue you described, expanding battery [assumed], and cover coming away from the bezel.....
I believe though that if you keep the device plugged into the wall when trying to boot up with this battery defect it will get through the boot, at least in the beginning anyway....
I believe also that if it was a battery issue the device would power off first, as opposed to just sticking on the Google logo.........
ldkud50 said:
Make sure you have the latest fastboot by updating SDK Manager. Then reflash bootloader then reboot back to bootloader to reset. Then proceed to flash each partition again. Directions below.
fastboot flash bootloader bootloader.img <-- rename bootloader to this to make it easier
fastboot flash radio radio.img <--- again rename to make easier
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash recovery recovery.img
fasyboot flash system system.img
Hope this helps.
Click to expand...
Click to collapse
I tried all of that already bro, it takes the files fine i did each individually including the bootloader. yes i have the latest sdk and latest fasboot. same issue no matter what i try. thank you all for ur help so far, really appreciate it.
jeromechrome1 said:
I tried all of that already bro, it takes the files fine i did each individually including the bootloader. yes i have the latest sdk and latest fasboot. same issue no matter what i try. thank you all for ur help so far, really appreciate it.
Click to expand...
Click to collapse
Thats too bad. Maybe the device is hosed. RMA for a new one.
Same thing happened to me. As soon as I updated to the newest version of fastboot on my computer, everything worked...
jeromechrome1 said:
My motorola Nexus 6 won't turn on, when I try to power it on, it shows the Google sign then shuts off immediately. When I plug in the charger from a complete power off, the white battery sign keeps flashing, it shows for 1 second then shuts off then repeats the cycle of showing the battery sign then shutting off. It boots into bootloader/fastboot mode fine, and I have tried flashing the factory image, it flashes fine but it still shuts off immediately while showing the google sign. It won't even boot into recovery after the flash, it just shuts off after the google sign. This isn't my first nexus, in know that flashing factory image should fix 99% of issues. Please help.
P.S I didn't purchase officially from google or Motorola, bought it from a guy who claimed he bricked it trying to install a font pack so I figured let me buy it and restore factory image. Didn't work. I tried flashing manually, the process went fine, but it it still turns off at google splash image. I tried Wugfresh toolkit also to no avail. He said he rooted it, installed custom recovery and euphoria os rom. Then he installed the fontpack, it told him to reboot to apply changes, and it wouldn't boot past google screen after that. It doesnt even get to the boot animation. It just shuts off. When its off and u plug in the charger it does the same thing, you just keep seeing the charging symbol over and over because its constantly rebooting. Its a T-Mobile Nexus 6 BTW, model number XT1103. I spoke to my friend who has a local repair shop and he says there is nothing out for his z3x or his other boxes for the nexus 6 because it is such a new and rare device. His theory is that the partition tables have been corrupted somehow and need to be rewritten manually. Please any help would be appreciated. I can promise a hefty $$ reward for any individual that helps me recover it to a working state.
Click to expand...
Click to collapse
I know, it's been a long time, but coud you tell me what happened to the phone?
I attempted to OTA update my stock Nexus 6 to 5.1 last night, setting it aside to do its thing and went to bed. When I turned the phone on this morning it went into the boot animation which just goes on indefinitely. I have attempted to clear the cache which did nothing. I was wondering if there is a work around without having to wipe the phone and thus lose all my data.
I have seen the first boot take up to 20 minutes you didn't turn off before then did you?
Sent from my Google N6 on VZ
No I left it in my pocket on my commute to work and tried to restart the phone over 2 hours later
Andrew_3 said:
No I left it in my pocket on my commute to work and tried to restart the phone over 2 hours later
Click to expand...
Click to collapse
Leave it booting for over 20 minutes. If it isnt booting after that, it isnt going to.
The next option is using fastboot to wipe the phone.
fastboot erase cache
fasboot erase userdata
Agreed 20 minutes is probably too long but I wanted to understand how long he was waiting. I know I get crazy impatient
Sent from my Google N6 on VZ
So left it over 20 mins and it did nothing. I have installed the 15 seconds ADB installer with all the drivers. Fastboot can recognise the device but the code >adb devices can't find anything! I even plugged in my Nexus 9 which works just fine with no result.
If during the upgrading process you used the command "fastboot erase cache" and received the message "did you mean format?" or something like that, then you need toflash the cache.img.
"fastboot flash cache chache.img"
I was stuck in a infinite boot animation at one point also. Did the above, and the phone booted in 15 seconds.
Andrew_3 said:
So left it over 20 mins and it did nothing. I have installed the 15 seconds ADB installer with all the drivers. Fastboot can recognise the device but the code >adb devices can't find anything! I even plugged in my Nexus 9 which works just fine with no result.
Click to expand...
Click to collapse
adb devices won't find fastboot devices. Adb works only in android or recovery. Fastboot only works in bootloader.
I didn't do the upgrade myself it was OTA!
Won't re flashing the image wipe the phone though?
Andrew_3 said:
I didn't do the upgrade myself it was OTA!
Won't re flashing the image wipe the phone though?
Click to expand...
Click to collapse
Yes, it will, but at this point, you either have a phone that won't boot, or the possibility of a phone that will afterwards, which one do you want?
I'd flash the image and see what you get. It's a small tradeoff at the moment.
Oh, and RootSU, like the new avatar!
My friend got the exact same problem - tried the OTA update, and after that the phone is stuck at the boot animation. I tried to clear cache/factory reset, and once it even booted up, but after showing the android logo it displayed something like "services stopped" (it was too fast to read carefully) and it powered down. And now no matter what I do, it stays on the boot animation. Is there anything I can do about it without my friend loosing his warranty?
PS. And when I tried the "fastboot erase cache" it displayed the "did you mean format?". Where can I find the "cache.img" to flash - and will it void the warranty?
Edit: Ok - I have flashed the Cache.img - now the phone boots quite fast, but immediately after the "android" logo I get "exchange services stopped", and "Print spooler stopped" with an "ok" that I can't click :/
Edit2: If I would have to flash the whole rom, which one should I choose? LMY47 - D, E, I ?
Edit 3: I have flashed the "I" version, and my friends phone works again