How to port Cm7 based roms
Guys, as i did a port of Reincarnation to s5830i, i received some PM questioning how to port. But i'll tell you, i take zero (0) credits on method. I used this: http://forum.xda-developers.com/showthread.php?t=2276871. Even so, it still needs some changes in build.prop for making the rom usable. So, i decided to make a guide about it.
Things needed:
bieltv.3 RC1 build
rom you'll port
Rom porter tool by mnishamk
Notepad++
Okay, here are the steps:
1.Enter "Start porting rom"
2.Enter "Cyanogen Based"
3.Drag the base rom (bieltv.3 RC1) and press enter
4.Drag the port rom and press enter
5.Press enter until you see "editing build.prop file"
6.Enter "GRI40"
7.Enter "GINGERBREAD"
8.Press "1" and press enter
9.Enter just numbers, with the version of your rom (like for SGS3 V5, should be entered 5.0)
10.Enter CyanogenMod version (7.2)
11.Enter "21"
12.Enter "14"
13.Enter the name of the rom
14.Wait 'til it finishes compressing
15.Close the tool.
16.Extract rom in OUTPUT folder
17.Enter build.prop
18.In build.prop, do this changes:
18a: Change every "cooper" to "cooperve"
18b: Change S5830 to S5830i
18c: Change "system.prop for XXXXX" until "ADDITIONAL_BUILD_PROPERTIES" to this:
#
# system.prop for GT-S5830i
#
# Dalvik
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.startheapsize=32m
dalvik.vm.dexopt-data-only=1
dalvik.vm.dexopt-flags=m=y
dalvik.vm.heapsize=32m
dalvik.vm.checkjni=false
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=500
dev.sfbootcomplete=0
# Screen Rotation
persist.sys.rotationanimation=false
# Bluetooth
net.bt.name=Android
# RIL
rild.libpath=/system/lib/libbrcm_ril.so
ro.telephony.ril_class=samsung
rild.libargs=-d /dev/smd0
DEVICE_PROVISIONED=1
ro.ril.ntmodeglobal=true
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
mobiledata.interfaces=pdp0,eth0,gprs,ppp0
ro.telephony.call_ring.delay=0
ro.ril.disable.power.collapse=0
# Display
ro.sf.lcd_density=160
qemu.sf.lcd_density=160
video.accelerate.hw=1
ro.opengles.version=131072
# Google Location
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
# Wifi interface
wifi.interface=eth0
wifi.supplicant_scan_interval=15
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.dns1=8.8.8.8
net.dns2=8.8.4.4
# USB / SD card
persist.service.usb.setting=0
persist.sys.vold.switchexternal=1
# Statgefright
media.stagefright.enable-player=true
ro.media.dec.jpeg.memcap=10000000
#Alsa
alsa.mixer.playback.master=Speaker
alsa.mixer.capture.master=Mic
alsa.mixer.playback.earpiece=Earpiece
alsa.mixer.capture.earpiece=Mic
alsa.mixer.playback.headset=Headset
alsa.mixer.capture.headset=Mic
alsa.mixer.playback.speaker=Speaker
alsa.mixer.capture.speaker=Mic
alsa.mixer.playback.bt.sco=BTHeadset
alsa.mixer.capture.bt.sco=BTHeadset
alsa.mixer.playback.bt.a2dp=BTHeadset
alsa.mixer.capture.bt.a2dp=BTHeadset
# Performance Tweaks
ro.compcache.default=0
persist.sys.use_dithering=0
view.fading_edge_length=8v
view.minimum_fling_velocity=25
view.scroll_friction=0.008
view.touch_slop=15 X
debug.composition.type=mdp
windowsmgr.max_events_per_sec=150
debug.performance.tuning=1
# CM parts hack
persist.sys.use_16bpp_alpha=1
persist.sys.jit-mode=int:jit
persist.sys.jit-mode=1
persist.sys.scrollingcache=3
#Tweaks
ro.setupwizard.enable_bypass=1
persist.sys.purgeable_assets=1
Click to expand...
Click to collapse
19.Change Torch.apk of the rom you ported to RC1's Torch.apk (otherwise Torch won't work)
20.Compress and test on your Ace-I
Hit thanks if i helped
Nice for noobs! Now Ace-I will be flooded with CM7.2 ROMs
Sniper Killer said:
Nice for noobs! Now Ace-I will be flooded with CM7.2 ROMs
Click to expand...
Click to collapse
It already is
Sniper Killer said:
Nice for noobs! Now Ace-I will be flooded with CM7.2 ROMs
Click to expand...
Click to collapse
iamareebjamal said:
It already is
Click to expand...
Click to collapse
It is always better to have more roms
Good guide!It would be better for porting CM7 ROM based on biel's CM RC Version.I will try porting NIghtlyfourE1 again and as Sniper said it would have a flood of CM ROM.
edit:Now NFe1 is stable.
Sniper Killer said:
Nice for noobs! Now Ace-I will be flooded with CM7.2 ROMs
Click to expand...
Click to collapse
Sniper, if this guide is followed correctly it will result in a bugless port. Having bugless cm roms is nice, right?
Sent from my GT-S5830i using xda app-developers app
Wow, thanks for this. I will try it tommorow!
Hi
ROM Ace-i-Sure 11.1 is the port?
TiTaN_88 said:
Hi
ROM Ace-i-Sure 11.1 is the port?
Click to expand...
Click to collapse
No
Care to read OP of the ROM?
If it's a port, it will be written there
TiTaN_88 said:
Hi
ROM Ace-i-Sure 11.1 is the port?
Click to expand...
Click to collapse
Hmm... please explain.
Lol I port manually, without using any additional software. Only Total Commander, Notepad++ and apktools. :laugh:
ivchek said:
Lol I port manually, without using any additional software. Only Total Commander, Notepad++ and apktools. :laugh:
Click to expand...
Click to collapse
I port that way, like i did with Miui cream and CoD rom. I used this software to port only the Reincarnation Rom. When you ported LeWa rom, did you face any trouble with phone.apk?
mathm2013 said:
When you ported LeWa rom, did you face any trouble with phone.apk?
Click to expand...
Click to collapse
Fortunately, no... I port it manually... at all users 4pda are operated manually or using almost no services, it reduces the chances for error to 1%.
ivchek said:
Fortunately, no... I port it manually... at all users 4pda are operated manually or using almost no services, it reduces the chances for error to 1%.
Click to expand...
Click to collapse
I ported manually and using software, and even so faced problems. Did you ported from cooper?
mathm2013 said:
I ported manually and using software, and even so faced problems. Did you ported from cooper?
Click to expand...
Click to collapse
Yea..Porting manually gives less errors.(Based on experience) certain phone.apks give error...Find another one from some other build.
Sent from my GT-S5830i using xda app-developers app
mathm2013 said:
I ported manually and using software, and even so faced problems. Did you ported from cooper?
Click to expand...
Click to collapse
Yes, of course, I think it is so much easier.
Manual porting could be beneficial.
Maybe you could add some lines in OP about manual porting, just a suggestion! :good:
if only we could port kernels T.T
Related
Posted at sammobile:http://www.sammobile.com/threads/329-P7510-Galaxy-Tab-10.1-wifi-Firmwares.
NOT MY WORK OR MY RELEASE the credit goes to sammobile.
I havent tried it as i only have the GT-P7500
Just saw the same thing. I have the GT-P7510, but haven't tried it yet. Would love a already rooted stock ROM that I can flash with Odin
New bootloader is included.
BOOTLOADER_P7510XWKH8_CL519295.tar.md5
I don't flash it; scary because locked bootloaders
Like it every rom is smoother
---------- Post added at 09:19 PM ---------- Previous post was at 09:16 PM ----------
jenskristian said:
Just saw the same thing. I have the GT-P7510, but haven't tried it yet. Would love a already rooted stock ROM that I can flash with Odin
Click to expand...
Click to collapse
Root is 2 seconds work, don't be lazy
strunkie said:
New bootloader is included.
BOOTLOADER_P7510XWKH8_CL519295.tar.md5
I don't flash it; scary because locked bootloaders
---------- Post added at 09:19 PM ---------- Previous post was at 09:16 PM ----------
Root is 2 seconds work, don't be lazy
Click to expand...
Click to collapse
Got a link? I have the one I used for UEKME, but will that one work?
jenskristian said:
Got a link? I have the one I used for UEKME, but will that one work?
Click to expand...
Click to collapse
i use this root.
Install with recovery mode or clockwork
Update superuser with the market and the SU binary with superuser.
And download busybox from the market (busybox installer)
I downloaded and tried to extract the system.img for more information but couldn't mount it. Could someone post a build.prop? Would be awesome
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=HMJ37
ro.build.display.id=HMJ37
ro.build.version.incremental=XWKH8
ro.build.version.sdk=12
ro.build.version.codename=REL
ro.build.version.release=3.1
ro.build.date=Tue Aug 30 10:10:04 KST 2011
ro.build.date.utc=1314666604
ro.build.type=user
ro.build.user=root
ro.build.host=DELL122
ro.build.tags=release-keys
ro.product.model=GT-P7510
ro.product.brand=samsung
ro.product.name=GT-P7510
ro.product.device=GT-P7510
ro.product.board=GT-P7510
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=tegra
# ro.build.product is obsolete; use ro.product.device
ro.build.product=GT-P7510
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=GT-P7510-user 3.1 HMJ37 XWKH8 release-keys
ro.build.fingerprint=samsung/GT-P7510/GT-P7510:3.1/HMJ37/XWKH8:user/release-keys
ro.build.characteristics=tablet,nosdcard
# Samsung Specific Properties
ro.build.PDA=P7510XWKH8
ro.build.hidden_ver=P7510XWKH8
ro.build.changelist=519295
ro.build.buildtag=
# end build properties
#
# system.prop for P3
#
ro.opengles.version = 131072
wifi.interface=eth0
rild.libpath=/system/lib/libsec-ril-apalone.so
rild.libargs=-d /dev/ttys0
keyguard.no_require_sim=yes
# Samsung Tvout Service
ro.sectvout.enable=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.ringtone=S_Minimal_tone.ogg
ro.config.notification_sound=S_On_time.ogg
ro.config.alarm_alert=Good_Morning.ogg
dev.sfbootcomplete=0
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=288m
ro.secdevenc=true
ro.carrier=wifi-only
drm.service.enabled=true
ro.setupwizard.mode=OPTIONAL
ro.setupwizard.enterprise_mode=1
ro.com.google.gmsversion=3.1_r2
ro.error.receiver.system.apps=com.google.android.feedback
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-samsung
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Languages:
Bahasa Indonesia
Catela
Cestina
Dansk
Deutsch
English (UK)
English (US)
Espanol (espana)
Espanol (Estados Unidow)
Estonian
Francais (belgie)
Francais (france)
hrvatski
Icelandic
italiano
Kazakh
latviesu
Magyar
Nederlands (belgie)
Nederlands (Nederland )
Norsk Bokmal
polski
portugues
Romania
Slovencina
Slovenscina
Suomi
Svenska
Tieng Viet
Turce
Much more strange languages (chinese rusia and more!)
Edit: I was confused about this version and the one I tried for real (XXKH3). Sorry
I tried it already and went back to uekme, the rom was super fast and snappy but the font smoothing has been changed and fonts look like ****... too bad.
For those who are curious, the fonts are thinner, smaller, and super fuzzy, I thought I needed some new glasses !!!
I'm sure they changed the font smoothing technology because of some lingering patent war between them and apple, forcing them to turn to some other smoothing techno.
Makes me afraid for the upcoming updates which will be coming one day or the other.
Maybe Ice Cream Sandwich will have fuzzy fonts on the Galaxy Tab
Sent from my HTC Vision using XDA App
Latoc said:
I tried it already and went back to uekme, the rom was super fast and snappy but the font smoothing has been changed and fonts look like ****... too bad.
For those who are curious, the fonts are thinner, smaller, and super fuzzy, I thought I needed some new glasses !!!
I'm sure they changed the font smoothing technology because of some lingering patent war between them and apple, forcing them to turn to some other smoothing techno.
Makes me afraid for the upcoming updates which will be coming one day or the other.
Maybe Ice Cream Sandwich will have fuzzy fonts on the Galaxy Tab
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
Aha i like this font, works on a 17" sony vaio Full-HD, font are smaller here
Latoc said:
I tried it already and went back to uekme, the rom was super fast and snappy but the font smoothing has been changed and fonts look like ****... too bad.
For those who are curious, the fonts are thinner, smaller, and super fuzzy, I thought I needed some new glasses !!!
I'm sure they changed the font smoothing technology because of some lingering patent war between them and apple, forcing them to turn to some other smoothing techno.
Makes me afraid for the upcoming updates which will be coming one day or the other.
Maybe Ice Cream Sandwich will have fuzzy fonts on the Galaxy Tab
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
How exactly did you flash this?
jenskristian said:
How exactly did you flash this?
Click to expand...
Click to collapse
I'm sorry guys, I was a bit too quick, I double checked and the one I flashed was from August 28th, namely XXKH3, it is about the same batch, but it is not THIS rom I flashed, so I cannot judge about the fonts on this rom.
Again, sorry.
PS: I'm downloading this one as I type this, so I can see for myself !
Excellent can't wait to get home this is by far the newest
Sent from my GT-P7510 using Tapatalk
Come on. Flashed two days ago kh5 and now this. When can i actually use my tab? :-D
Can someone make a cwm flashable zip of /system?
Sent from my GT-P7510 using Tapatalk
oclock said:
Come on. Flashed two days ago kh5 and now this. When can i actually use my tab? :-D
Can someone make a cwm flashable zip of /system?
Sent from my GT-P7510 using Tapatalk
Click to expand...
Click to collapse
Im deodexing and building from this already. Should have a rom release in replacement to my KME version.
task650 said:
Im deodexing and building from this already. Should have a rom release in replacement to my KME version.
Click to expand...
Click to collapse
Awesome. I'll be all over it. Will this be your OG ROM or the In Paris ROM? (I assume it can't be the stock ROM, right?)
task650 said:
Im deodexing and building from this already. Should have a rom release in replacement to my KME version.
Click to expand...
Click to collapse
great to hear!
task650 said:
Im deodexing and building from this already. Should have a rom release in replacement to my KME version.
Click to expand...
Click to collapse
Can't wait. Can you update us on the progress?
task650 said:
Im deodexing and building from this already. Should have a rom release in replacement to my KME version.
Click to expand...
Click to collapse
Could you also post a stock deodexed and rooted version? That would be really appreciated.
Is there a changelog posted anywhere?
Just flashed and it is running smooth. Feels faster than any of the other roms available (previously running Paris v4 with pershot kernel oc'd to 1.3). I did not flash the new bootloader though. Odin'd the latest overcome recovery and flashed the root package in recovery and so far so good.
P7510UEKMM:
Android 3.2
Download:
http://hotfile.com/dl/135008863/06ca0fd/GT-P7510_XAB_P7510UEKMM_P7510XABKMM_P7510UEKMM.rar.html
Pass: sampro.pl
It seems that Przekret is faster then me when it comes to up and downloading. I actually found this update by trying different CSC codes and it got automatically published on check fus.
It's the same US Wifi only update that was released today.
Has anyone tested this with pershoot's kernel and will the "regular" root zip still work?
Is a pit file needed when flashing with Odin?
Downloading.....
Tnx...
DutchDanny said:
Downloading.....
Click to expand...
Click to collapse
Do you plan on putting together a cwm flashable zip out of that Odin package? That would be great!
Can someone please upload this to multiupload? thanks a lot
Give me a few.. and you can flash CWM
DutchDanny said:
Give me a few.. and you can flash CWM
Click to expand...
Click to collapse
Wouldt be nice...Tia
Is this one multilanguage? Dutch...?
Can anybody tell me what's different from the jjkj6 rom? Both are Android 3.2, right?
paalkr said:
Can anybody tell me what's different from the jjkj6 rom? Both are Android 3.2, right?
Click to expand...
Click to collapse
KMM is a US release.
The other from Israel, and does not support other languages.
Don't know yet about other languages on KMM, as soon as i know, I will let you know
saving my SD now
EDIT: multi Languages EN, EU, Chinees, and other strange stuff
EDIT: NO WiFi issues on NL setup
Wifi problem?
Apparently, this update is causing issues with wifi. Pretty important on a Wifi only tablet, lol.
http://www.androidcentral.com/galax...wifi-process?utm_source=ac&utm_medium=twitter
http://phandroid.com/2011/11/14/sam...te/?utm_source=twitterfeed&utm_medium=twitter
excellent!
anyone know if its recovery 2e? like the 3.1?
am gona flash with odin .this is what i was waiting for! yey!
sucks for me cuz i have to go to work soon...but after i come from work am gona flash this one!
so backing up now!
---------- Post added at 05:21 AM ---------- Previous post was at 05:16 AM ----------
Highriser said:
Apparently, this update is causing issues with wifi. Pretty important on a Wifi only tablet, lol.
http://www.androidcentral.com/galax...wifi-process?utm_source=ac&utm_medium=twitter
http://phandroid.com/2011/11/14/sam...te/?utm_source=twitterfeed&utm_medium=twitter
Click to expand...
Click to collapse
so can anyone who flashed via odin confirm this?
i wonder if the installer using the 'trasditiona' way is not wiping everything and hence the problems??
I have no WiFi issues after flashing with Odin
I think it's for US WiFi Setup, where I read a lot of WiFi issues
DutchDanny said:
I have no WiFi issues after flashing with Odin
Click to expand...
Click to collapse
Nice!!! Cant wait for your flashable release!!! Thanks as always!
DutchDanny said:
I have no WiFi issues after flashing with Odin
I think it's for US WiFi Setup, where I read a lot of WiFi issues
Click to expand...
Click to collapse
Good! Any change for a pre-rooted CWM flashable build? Is all the Nordic languages included?
paalkr said:
Good! Any change for a pre-rooted CWM flashable build? Is all the Nordic languages included?
Click to expand...
Click to collapse
I think I did see that... sorry for me you kinda EU.... You so close to me
And ROOT will be there, no fun without it
and Odin does NOT wipe your SD
build.prop
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=HTJ85B
ro.build.display.id=HTJ85B.UEKMM
ro.build.version.incremental=UEKMM
ro.build.version.sdk=13
ro.build.version.codename=REL
ro.build.version.release=3.2
ro.build.date=Thu Oct 27 19:31:43 KST 2011
ro.build.date.utc=1319711503
ro.build.type=user
ro.build.user=se.infra
ro.build.host=SEP-81
ro.build.tags=release-keys
ro.product.model=GT-P7510
ro.product.brand=samsung
ro.product.name=GT-P7510
ro.product.device=GT-P7510
ro.product.board=GT-P7510
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=tegra
# ro.build.product is obsolete; use ro.product.device
ro.build.product=GT-P7510
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=GT-P7510-user 3.2 HTJ85B UEKMM release-keys
ro.build.fingerprint=samsung/GT-P7510/GT-P7510:3.2/HTJ85B/UEKMM:user/release-keys
ro.build.characteristics=tablet,nosdcard
# Samsung Specific Properties
ro.build.PDA=P7510UEKMM
ro.build.hidden_ver=P7510UEKMM
ro.build.changelist=568557
ro.build.buildtag=jenkins-HUDSON_GA_HONEYCOMB_P4-WIFI-TW_USA-BESTBUY-407
# end build properties
#
# system.prop for P3
#
ro.opengles.version = 131072
wifi.interface=eth0
rild.libpath=/system/lib/libsec-ril-apalone.so
rild.libargs=-d /dev/ttys0
keyguard.no_require_sim=yes
# Samsung Tvout Service
ro.sectvout.enable=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.ringtone=S_Minimal_tone.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.config.alarm_alert=Good_Morning.ogg
dev.sfbootcomplete=0
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=288m
ro.secdevenc=true
ro.carrier=wifi-only
drm.service.enabled=true
ro.setupwizard.mode=OPTIONAL
ro.setupwizard.enterprise_mode=1
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.error.receiver.system.apps=com.google.android.feedback
ro.com.google.gmsversion=3.2_r3
ro.com.google.clientidbase=android-samsung
ro.com.google.locationfeatures=1
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
DutchDanny said:
I think I did see that... sorry for me you kinda EU.... You so close to me
And ROOT will be there, no fun without it
and Odin does NOT wipe your SD
Click to expand...
Click to collapse
Thanks! Can't wait
A Few Questions
Is this a completely stock build? System, kernel, recovery?
Is it root-able with the current methods available?
Highriser said:
Is this a completely stock build? System, kernel, recovery?
Is it root-able with the current methods available?
Click to expand...
Click to collapse
I bet Task650 will release his 3.2 ROM VERY soon Go to his thread and keep punching that f5
Uploading STOCK odex KMM multi lang ROOTED
You will see a new thread poping up shortly
Features:
Stock
Rooted
Deodexed
Busybox
Zipaligned
Init.d Support
Based off UK BTU rom for XXALE8
Feel free to do whatever you want from it
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Build.prop Content:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=IMM76D.I9300XXALE8
ro.build.version.incremental=I9300XXALE8
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Sun May 13 06:50:29 KST 2012
ro.build.date.utc=1336859429
ro.build.type=user
ro.build.user=se.infra
ro.build.host=SEP-74
ro.build.tags=release-keys
ro.product.model=GT-I9300
ro.product.brand=samsung
ro.product.name=m0xx
ro.product.device=m0
ro.product.board=smdk4x12
ro.product.cpu.abi=armeabi-v7a
ro.product_ship=true
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=exynos4
# ro.build.product is obsolete; use ro.product.device
ro.build.product=m0
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=m0xx-user 4.0.4 IMM76D I9300XXALE8 release-keys
ro.build.fingerprint=samsung/m0xx/m0:4.0.4/IMM76D/I9300XXALE8:user/release-keys
ro.build.characteristics=default
# Samsung Specific Properties
ro.build.PDA=I9300XXALE8
ro.build.hidden_ver=I9300XXALE8
ro.build.changelist=554452
# end build properties
#
# system.prop for smdk4x12
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/ttyS0
ro.sf.lcd_density=320
ro.lcd_min_brightness=20
ro.kernel.qemu=0
persist.sys.storage_preload=1
net.streaming.rtsp.uaprof=http://wap.samsungmobile.com/uaprof/
# Multimedia property for Smart View
media.enable-commonsource=true
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.opengles.version=131072
hwui.render_dirty_regions=false
ro.sec.fle.encryption=true
ro.secwvk=220
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
windowsmgr.max_events_per_sec=100
ro.config.ringtone=S_Over_the_horizon.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.config.alarm_alert=Walk_in_the_forest.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
ro.error.receiver.default=com.samsung.receiver.error
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
keyguard.no_require_sim=true
ro.com.android.dataroaming=false
ro.com.android.dateformat=MM-dd-yyyy
ro.com.google.clientidbase=android-samsung
drm.service.enable=true
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.com.google.gmsversion=4.0_r2
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Install Instructions:
Wipe data/cache/dalvik
Flash rom in recovery
Reboot
Delete anything you don't want and profit
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Note to Developers:
If you want to use my rom as a base, go ahead. Please just give proper credit in the OP. Thanks
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Download:
Download Here
MD5:
fda8e61b8564077be9b0f6dd394ccaf3
Upload failed I'll try again in the AM.
Link is up guys enjoy. Should work. Idk I uploaded with tether so if it was bad again I'll wait till I'm home tonight and use real wifi.
Working well for me. Thank you.
EDIT: Argh... the download kept grinding to a halt after 50Mb or so. I kept restarting it and eventually got it downloaded but there is a MD5 mismatch. Trying again.
EDIT 2: I downloaded again, this time without errors... BUT I got the same MD5 as previously 8008d0db30f377c441630f81edeac21f. Is this actually correct?
I'm going to flash it anyway (Life is nothing without an adventure)
EDIT 3:
Code:
Status (0)
Installation aborted
I guess I had better have my adventure tomorrow
im going to try and make my first custom rom with this, thanks for your hard work.
Read above you. The file is broken and needs to be re-uploaded.
When will it be uploaded. Wasted lot of time trying to install. Waiting for fresh upload.
jsbutran said:
When will it be uploaded. Wasted lot of time trying to install. Waiting for fresh upload.
Click to expand...
Click to collapse
Relax.
You could have saved yourself alot of time if you had read the posts above yours.
Thread reopened guys... Thanks for waiting and thanks to nobnut for testing this for me
Thanks.
I get the following error -
Error in /emmc/Custom/rom/ics/SGS3_Stock_dmeadows013.zip (Status1)
Installation aborted.
I think you got a bad downlo. Check the md5 and they afain.
Sent from my Rezound churning Cream
Thanks !
i downloaded the same file from samfirmware (twice) and it fails md5 check in odin. i think the file is corrupt before we start.
tharizdun_uk said:
i downloaded the same file from samfirmware (twice) and it fails md5 check in odin. i think the file is corrupt before we start.
Click to expand...
Click to collapse
You shouldn't be flashing this in odin.. This is to flash in a custom recovery.
Sent from my Rezound churning Cream
dmeadows013 said:
You shouldn't be flashing this in odin.. This is to flash in a custom recovery.
Sent from my Rezound churning Cream
Click to expand...
Click to collapse
His not alone i downloaded this 5 times then on the 6th time i used md5 check program that i have it does match your md5 checksum but when i flash it in cwm it gives the status 7 error..
When I try to flash in Recovery it comes up "Starting AROMA INSTALLER version 2.0" then I get a error. My current rom in omega and did wipe data/factory reset and also formatted system, data, cache and rebooted recovery. Also reflashed recovery, same message comes up.
dmeadows013 said:
You shouldn't be flashing this in odin.. This is to flash in a custom recovery.
Sent from my Rezound churning Cream
Click to expand...
Click to collapse
it was the file downloaded from samfirmware that i was flashing with odin not your file. it looks like the original file is corrupt as odin complains about the md5 not matching
Where is the description of the ROM? What's good about this ROM? Reason I ask is I'm looking for a good UK based Rom, are you going to do any tweaking and enhancing ;-)
Sent from my GT-I9300 using xda premium
Have you deodexed also smemo?
Anyone?
Sent from my GT-I9300 using xda premium
Hi everyone, I'm looking for a method to make sound louder in ringtones, notifications, music, I tried several methods but none results.:crying:
I try hack mod
My phone haven't the file default_gain.conf
only one result is a hack camera sound, editing volume.db
I try with volume+ and speaker boost none results..
if anyone knows some method, please can you post it
sorry by my english
my s3mini firmware is I8190XXALL2 I8190OXXALL1 rooted by avicohh
Thanks avicohh :good:
Hi, I have activate in my rom this mod:
XxXPachaXxX Sony Exclusive Pack! | BRAVIA-xLoud | PlayStation Cert WORKING!
This works very good and I've noticed so far no bugs. If demand for explanations, links exist then please write again.
Thanks and sorry for my bad english ... Then I have enabled init.d support for Stock rom & stock (secure) kernel.
Greeting,
leather.face (formerly Prototyp1981)
leather.face said:
Hi, I have activate in my rom this mod:
XxXPachaXxX Sony Exclusive Pack! | BRAVIA-xLoud | PlayStation Cert WORKING!
This works very good and I've noticed so far no bugs. If demand for explanations, links exist then please write again.
Thanks and sorry for my bad english ... Then I have enabled init.d support for Stock rom & stock (secure) kernel.
Greeting,
leather.face (formerly Prototyp1981)
Click to expand...
Click to collapse
Thanks leather.face, please can you post the installation instructions for s3mini :fingers-crossed:
Install Instruction for the " xLoud and bravia engine "
Black_Armor said:
Thanks leather.face, please can you post the installation instructions for s3mini :fingers-crossed:
Click to expand...
Click to collapse
Hi, yes I can send the installation instructions but today it is nothing more, tomorrow (sometime) ... I post only the install instruction for the xLoud & Bravia Engine without the batchscript for init.d support. I send Faria the batchscript and he will included the init.d files in his next rom update.
Greeting
Edit: I post in the next 2 hours the instruction with files (zip).
Edit 2:
" Install Instruction "
Sorry I can not posting outside links in their messages ... For screenshots in permissions please send me a PM and when I have more 10 posts then I can posting outside links. Thanks for your understanding!
xLoud & Bravia Engine by XxXPachaXxX
Search in google for this zip " XxXPachaXxX_Sony_ICS_pack.zip " and extract this zip on your micro sd-card. Then start a root file manager and open/edit your build.prop in the system folder with a text editor and add these lines for xLoud & Bravia Engine:
Code:
#Xloud Engine Service
nro.semc.sound_effects_enabled=true
nro.semc.xloud.supported=true
npersist.service.xloud.enable=1
#
#Bravia Engine Service
ro.service.swiqi.supported=true
persist.service.swiqi.enable=1
" build.prop before leaving store " and delete the build.prop.bak. The permission for the build.prop is r-w-r-r . Then copy and paste all files in the specified folder. Permissions must be set manually!
The folder playcert in the XxXPachaXxX_Sony_ICS_pack.zip is unimportant for the xLoud & Bravia Engine Hack.
Once these steps are completed perform a reboot and it should work . Should questions arise, I will help very much further and I hope I could help with this mod.
I send all my credits for this mod to " XxXPachaXxX " !
Optional - more build.prop tweaks - incrase performance, scroll speed and more. Open/edit your build.prop in the system folder with a text editor and add these lines:
Code:
#Optimizations
persist.adb.notify=0
persist.sys.purgeable_assets=1
dalvik.vm.verify-bytecode=false
dalvik.vm.dexopt-flags=v=n,o=v
persist.sys.purgeable_assets=1
#
#Disable Kernel Error Checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
#
# Disables data sent and logging
ro.config.nocheckin=1
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
#
#PowerSaver Tweaks
debug.sf.hw=1
pm.sleep_mode=1
usb_wakeup=enable
proximity_incall=enable
power_supply.wakeup=enable
ro.config.hw_power_saving=1
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
persist.sys.use_dithering=0
#
# Signal Tweaks
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.ril.hsdpa.category=8
ro.ril.hsupa.category=6
persist.cust.tel.eons=1
#
#Support for ipv4 and ipv6
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
#
#Enable Dual Transfer Mode
ro.ril.enable.dtm=1
#
#Net Tweaks
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.tcp.buffersize.default=6144,87380,110208,6144,16384,110208
net.tcp.buffersize.wifi=262144,524288,1048576,262144,524288,1048576
net.tcp.buffersize.lte=262144,524288,3145728,262144,524288,3145728
net.tcp.buffersize.hsdpa=6144,262144,1048576,6144,262144,1048576
net.tcp.buffersize.evdo_b=6144,262144,1048576,6144,262144,1048576
net.tcp.buffersize.umts=6144,87380,110208,6144,16384,110208
net.tcp.buffersize.hspa=6144,87380,262144,6144,16384,262144
net.tcp.buffersize.gprs=6144,8760,11680,6144,8760,11680
net.tcp.buffersize.edge=6144,26280,35040,6144,16384,35040
#
#Raise JPG quality to 100%
ro.media.enc.jpeg.quality=100
#
#Increase overall touch responsiveness
windowsmgr.max_events_per_sec=90
debug.performance.tuning=1
video.accelerate.hw=1
#
#Faster Scrolling
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
#
#Touch tunning
touch.presure.scale=0.001
#
#For sensor sleep control
ro.ril.sensor.sleep.control=1
#
#Improve overall media quality
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
#
#Dialing Tweaks
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
" build.prop before leaving store " and delete the build.prop.bak. The permission for the build.prop is r-w-r-r . Reboot your phone.
Greeting and I wish all users a nice saturday!
leather.face (Prototyp1981)
PS: Everything should be working then I would appreciate a thank you on the button. :angel:
Works fine Big THX
Gesendet von meinem GT-I8190 mit Tapatalk
Mr_I_Pink said:
Works fine Big THX
Gesendet von meinem GT-I8190 mit Tapatalk
Click to expand...
Click to collapse
Hi, I am glad you to hear it. If there are problems, I like to help where I can continue.
Greeting leather.face
Volume+ by Meltus
Sent from Spaceball One.
Thanks leather.face, works well.. :highfive:
Sorry for the delay, I had a lot of work
blackknightavalon said:
Volume+ by Meltus
Sent from Spaceball One.
Click to expand...
Click to collapse
Hi, sorry for my noob question but who is Meltus?
Regards
---------- Post added at 03:18 PM ---------- Previous post was at 03:16 PM ----------
Black_Armor said:
Thanks leather.face, works well.. :highfive:
Sorry for the delay, I had a lot of work
Click to expand...
Click to collapse
Hi, thanks for your statement and in the future I modfied more but I must see what is the result of my work. I wish a nice day.
Regards leather.
leather.face said:
Hi, sorry for my noob question but who is Meltus?
Regards
---------- Post added at 03:18 PM ---------- Previous post was at 03:16 PM ----------
Hi, thanks for your statement and in the future I modfied more but I must see what is the result of my work. I wish a nice day.
Regards leather.
Click to expand...
Click to collapse
"Meltus" is one of the Android hackers from WAY back when the HTC Dream was still the brand-new iPhone killer who came up with the original volume hacks.
blackknightavalon said:
Volume+ by Meltus
Sent from Spaceball One.
Click to expand...
Click to collapse
Saw volume+ however it says for GB only and not stock firmware.
Has anyone tried the app? noticed any gain?
Thanks!
Sent from my GT-I8190 using xda app-developers app
bOkz said:
Saw volume+ however it says for GB only and not stock firmware.
Has anyone tried the app? noticed any gain?
Thanks!
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
It works on ICS and JB as well. I just tested it on my device.
blackknightavalon said:
It works on ICS and JB as well. I just tested it on my device.
Click to expand...
Click to collapse
Thanks for comfirming!
Did you noticed significant gains?
Thanks!
Sent from my GT-I8190 using xda app-developers app
bOkz said:
Thanks for comfirming!
Did you noticed significant gains?
Thanks!
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
Not "significant," but noticeable.
blackknightavalon said:
Not "significant," but noticeable.
Click to expand...
Click to collapse
Gotcha, installing now!
Thanks!
Sent from my GT-I8190 using xda app-developers app
blackknightavalon said:
"Meltus" is one of the Android hackers from WAY back when the HTC Dream was still the brand-new iPhone killer who came up with the original volume hacks.
Click to expand...
Click to collapse
Hi, okay, thanks for your info. Have a nice evening and tomorrow a nice Sunday.
Greeeting
anybody can help me?
leather.face said:
Hi, yes I can send the installation instructions but today it is nothing more, tomorrow (sometime) ... I post only the install instruction for the xLoud & Bravia Engine without the batchscript for init.d support. I send Faria the batchscript and he will included the init.d files in his next rom update.
Greeting
Edit: I post in the next 2 hours the instruction with files (zip).
Edit 2:
" Install Instruction "
Sorry I can not posting outside links in their messages ... For screenshots in permissions please send me a PM and when I have more 10 posts then I can posting outside links. Thanks for your understanding!
xLoud & Bravia Engine by XxXPachaXxX
Search in google for this zip " XxXPachaXxX_Sony_ICS_pack.zip " and extract this zip on your micro sd-card. Then start a root file manager and open/edit your build.prop in the system folder with a text editor and add these lines for xLoud & Bravia Engine:
Code:
#Xloud Engine Service
nro.semc.sound_effects_enabled=true
nro.semc.xloud.supported=true
npersist.service.xloud.enable=1
#
#Bravia Engine Service
ro.service.swiqi.supported=true
persist.service.swiqi.enable=1
" build.prop before leaving store " and delete the build.prop.bak. The permission for the build.prop is r-w-r-r . Then copy and paste all files in the specified folder. Permissions must be set manually!
The folder playcert in the XxXPachaXxX_Sony_ICS_pack.zip is unimportant for the xLoud & Bravia Engine Hack.
Once these steps are completed perform a reboot and it should work . Should questions arise, I will help very much further and I hope I could help with this mod.
I send all my credits for this mod to " XxXPachaXxX " !
Optional - more build.prop tweaks - incrase performance, scroll speed and more. Open/edit your build.prop in the system folder with a text editor and add these lines:
Code:
#Optimizations
persist.adb.notify=0
persist.sys.purgeable_assets=1
dalvik.vm.verify-bytecode=false
dalvik.vm.dexopt-flags=v=n,o=v
persist.sys.purgeable_assets=1
#
#Disable Kernel Error Checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
#
# Disables data sent and logging
ro.config.nocheckin=1
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
#
#PowerSaver Tweaks
debug.sf.hw=1
pm.sleep_mode=1
usb_wakeup=enable
proximity_incall=enable
power_supply.wakeup=enable
ro.config.hw_power_saving=1
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
persist.sys.use_dithering=0
#
# Signal Tweaks
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.ril.hsdpa.category=8
ro.ril.hsupa.category=6
persist.cust.tel.eons=1
#
#Support for ipv4 and ipv6
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
#
#Enable Dual Transfer Mode
ro.ril.enable.dtm=1
#
#Net Tweaks
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.tcp.buffersize.default=6144,87380,110208,6144,16384,110208
net.tcp.buffersize.wifi=262144,524288,1048576,262144,524288,1048576
net.tcp.buffersize.lte=262144,524288,3145728,262144,524288,3145728
net.tcp.buffersize.hsdpa=6144,262144,1048576,6144,262144,1048576
net.tcp.buffersize.evdo_b=6144,262144,1048576,6144,262144,1048576
net.tcp.buffersize.umts=6144,87380,110208,6144,16384,110208
net.tcp.buffersize.hspa=6144,87380,262144,6144,16384,262144
net.tcp.buffersize.gprs=6144,8760,11680,6144,8760,11680
net.tcp.buffersize.edge=6144,26280,35040,6144,16384,35040
#
#Raise JPG quality to 100%
ro.media.enc.jpeg.quality=100
#
#Increase overall touch responsiveness
windowsmgr.max_events_per_sec=90
debug.performance.tuning=1
video.accelerate.hw=1
#
#Faster Scrolling
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
#
#Touch tunning
touch.presure.scale=0.001
#
#For sensor sleep control
ro.ril.sensor.sleep.control=1
#
#Improve overall media quality
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
#
#Dialing Tweaks
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
" build.prop before leaving store " and delete the build.prop.bak. The permission for the build.prop is r-w-r-r . Reboot your phone.
Greeting and I wish all users a nice saturday!
leather.face (Prototyp1981)
PS: Everything should be working then I would appreciate a thank you on the button. :angel:
Click to expand...
Click to collapse
'Then copy and paste all files in the specified folder' >> where to locate all files inside .zip? i cant found META-INF folder in my device... where is the folder should be?
sorry for the stupid questions because i'm a noob in android. i'm confuse, hoping someone answer me... thanks in advance
for people with low volume, try this http://forum.xda-developers.com/showthread.php?t=2110681
works great in the N version......
Hi,
I lives in france and so i have a volume limit inbuilt on my S3 mini GT-I8190 due to the european law.
I found a tuto for the S3 (at mobilenewspedia) and try to apply it to the S3 mini but i didn't found the default_gain.conf file.
Is your mod a way to disable the european limit ?
Thanks
THIS IS A Q&A THREAD DEDICATED
TO
CYANOGENMOD 12
BY @varun.chitre15 FOR ANDROID ONE DEVICES​
plz do not spam the development thread by posting questions !!!
For support and troubleshooting of cm12 , kindly post it here ; you will get your Answers .
No one likes to reply and spam thread to a repeated question in development thread ..
NOTE : DO NOT ASK FOR ETA !!!
cm12 beta 2 bugs:-
battery drain (stock battery backup better)
setting-mobile celluler network force close
no crt animation (add plzz)
no option in sim setting for switch 3g to 2g data signal. (like in stock)
thirdparty apps taking time to install (in beta 1 it install quickly)
camera fc on stop recording
bluetooth buggy (hope it will fix in beta 3)
hotspot buggy
K1Ng0r.fTw~ said:
cm12 beta 2 bugs:-
battery drain (sock battery backup better)
setting-mobile celluler network force close
no art animation (add plzz)
no option in sim setting for switch 3g to 2g data signal. (like in stock)
thirdparty apps taking time to install (in beta 2 it install quickly)
camera fc on stop recording
bluetooth buggy (hope it will fix in beta 3)
hotspot buggy
Click to expand...
Click to collapse
1. I feel battery pretty much same
2.cm bug
3. dev cannot add or remove features.. out of his control
4. cm bug .. guess its inside cellular setting.. use toggle network app
5. No idea.. haven't tested
6. there is a fix posted for video recording bug in that thread , search it !!
Faiyaz5yaz said:
1. I feel battery pretty much same
2.cm bug
3. dev cannot add or remove features.. out of his control
4. cm bug .. guess its inside cellular setting.. use toggle network app
5. No idea.. haven't tested
6. there is a fix posted for video recording bug in that thread , search it !!
Click to expand...
Click to collapse
ohk thank you so much
Which fix for video recording are you talking about??
Do u mean changing the media_codec.xml file????
I have already tried that but still the camera FC on video recording
I am still wondering if i am the only one who has this bug bcoz no one else has mentioned it.
Already tried making a clean install 3 times but same problem exists
Faiyaz5yaz said:
1. I feel battery pretty much same
2.cm bug
3. dev cannot add or remove features.. out of his control
4. cm bug .. guess its inside cellular setting.. use toggle network app
5. No idea.. haven't tested
6. there is a fix posted for video recording bug in that thread , search it !!
Click to expand...
Click to collapse
Help me plzz how can i root cm12 ????
K1Ng0r.fTw~ said:
Help me plzz how can i root cm12 ????
Click to expand...
Click to collapse
its prerooted most of the custom roms are prerooted.. :good:
deccen90 said:
its prerooted most of the custom roms are prerooted.. :good:
Click to expand...
Click to collapse
No cm12 by varun is not prerooted -_-
K1Ng0r.fTw~ said:
No cm12 by varun is not prerooted -_-
Click to expand...
Click to collapse
I'm using it build2 rooted man
deccen90 said:
I'm using it build2 rooted man
Click to expand...
Click to collapse
root explorer say root needed for acess :/
---------- Post added at 01:10 PM ---------- Previous post was at 12:29 PM ----------
How to root now??
Alright guys now i m a bit confused i even dont know if I am posting this on the correct thread cause i hear alot that beta2 is laggy so what do you ppl suggest me shall I stay on stock or just flash cm12 beta 2 or 1
Send from my A1 using XDA Free mobile app
Murtaza Gheewala said:
Alright guys now i m a bit confused i even dont know if I am posting this on the correct tread cause i hear alot that beta2 is laggy so what do you ppl suggest me shall I stay on stock or just flash cm12 beta 2 or 1
Send from my A1 using XDA Free mobile app
Click to expand...
Click to collapse
flash beta 2
K1Ng0r.fTw~ said:
flash beta 2
Click to expand...
Click to collapse
And i have to flash root like stock rom
Send from my A1 using XDA Free mobile app
Murtaza Gheewala said:
And i have to flash root like stock rom
Send from my A1 using XDA Free mobile app
Click to expand...
Click to collapse
ya. but i dont know how to root.
deccen90 said:
I'm using it build2 rooted man
Click to expand...
Click to collapse
Can i know how u got root access
Send from my A1 using XDA Free mobile app
Murtaza Gheewala said:
Can i know how u got root access
Send from my A1 using XDA Free mobile app
Click to expand...
Click to collapse
Just give permission when prompted nothing more ...i wonder why you guys asking [emoji15]
I think it's rooted. If its not then flash supersu zip from chainfire
Sent from my A1 using XDA Free mobile app
Thank you for creating this thread now I understood why there is such a mess in development thread ...
Tweaks for data
Some editing in build.prop and you just have to on the aeroplane mode and back to normal mode n you get data ( you have to do it just once, not 3 to 4 times)
Steps :
1. Root the cm12 rom
2. Install any root Explorer or build.prop editor
3. Copy the following in build.prop (don't delete the things that are in it by default)
4. Save and exit
5. Reboot
Editing:
wifi.supplicant_scan_interval=497
pm.sleep_mode=1
power.saving.mode=1
ro.ril.disable.power.collapse=0
ro.vold.umsdirtyratio=20
pm.sleep_mode=1*
ro.ril.disable.power.collapse=0*
profiler.force_disable_err_rpt=1*
profiler.force_disable_ulog=1*
dalvik.vm.checkjni=false*
dalvik.vm.execution-mode=int:jit
ro.ril.power_collapse=1
power_supply.wakeup=enable
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.config.hw_power_saving=1
persist.service.adb.enable=1
ro.telephony.call_ring.delay=0
persist.sys.shutdown.mode=hibernate
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
dalvik.vm.dexopt-flags=m=y
persist.service.pcsync.enable=0*
persist.service.lgospd.enable=0
debug.performance.tuning=1
ro.secure=0
persist.sys.use_16bpp_alpha=1
ro.product.gpu.driver=1
ro.min.fling_velocity=8000
ro.lge.proximity.delay=15
mot.proximity.delay=15
ro.ril.enable.amr.wideband=1
touch.presure.scale=0.0001
windowsmgr.max_events_per_sec=150
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.min_pointer_dur=8
persist.service.lgospd.enable=0
persist.service.pcsync.enable=0
ro.ril.enable.a52=1
ro.ril.enable.a53=0
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ime_extend_row_keyboard=true
ime_onehand_keyboard=true
ime_split_keyboard=true
ime_vibration_pattern=0:60
ro.media.enc.jpeg.quality=100
ro.kernel.android.checkjni=0
ro.config.hw_menu_unlockscreen=false
persist.sys.use_dithering=0
persist.sys.purgeable_assets=1*
dalvik.vm.dexopt-flags=m=y
ro.mot.eri.losalert.delay=1000
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspa=6144,87380,524288,6144,163 84,262144
net.tcp.buffersize.lte=524288,1048576,2097152,5242 88,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,8 7380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144, 87380,1048576
ro.ril.hsxpa=2
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=10
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=7
ro.ril.hsdpa.category=10
ro.ril.enable.a52=1
ro.ril.set.mtu1472=1
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
htc.audio.alt.enable=0
htc.audio.hac.enable=0
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 18700
wifi.supplicant_scan_interval=180
Hit thanks if I helped you
K1Ng0r.fTw~ said:
root explorer say root needed for acess :/
---------- Post added at 01:10 PM ---------- Previous post was at 12:29 PM ----------
How to root now??
Click to expand...
Click to collapse
use latest supersu.zip