Database Develop

[q] help ginger yoshy update

Hi to all,
is there any method to update ginger yoshi from v1.1 to v1.2
without data lost?
My phone is Dream 32b!
Please help!

Normally, you first wipe, and then flash Rom!
Try it without wipe, and only flash the Rom!
Maybe this works, or you have to download your apps again!

casello said:
Hi to all,
is there any method to update ginger yoshi from v1.1 to v1.2
without data lost?
My phone is Dream 32b!
Please help!
Click to expand...
Click to collapse
Well this is possible, all you have to do is use Titanium Backup..

casello said:
Hi to all,
is there any method to update ginger yoshi from v1.1 to v1.2
without data lost?
My phone is Dream 32b!
Please help!
Click to expand...
Click to collapse
Follow these steps.
1. Install Titanium Backup.
2. Do a backup either "Apps+System data" or preferably "App" only.
3. Reboot, wipe or superwipe and flash the new ROM as per instructions.
4. Boot into ROM and install Titanium Backup.
5. Recover the backed up data..

hi,
for first thanks to all.
I have also this problem: when i set cpu speed at 614MHz the phone reboot continuously after few minutes!
I do the wipe and try also the superwipe in the senquence that you say me
but the problem is still alive: g1 reboot continuously...

[Q] Can some one help me please? :)

I am trying to intall GingerCruzt revision 7.4 but...
When i intalled it through xrecovery and chose install custom zip when it boots i get the lockscreen and when i unlock it i just get ''Status Bar forceclose" and a black screen I tryed wipe cache but that didnt work.

braidijs said:
I am trying to intall GingerCruzt revision 7.4 but...
When i intalled it through xrecovery and chose install custom zip when it boots i get the lockscreen and when i unlock it i just get ''Status Bar forceclose" and a black screen I tryed wipe cache but that didnt work.
Click to expand...
Click to collapse
Restore your backup or flash original stock rom, then wipe data and flash gingercruzt again using xRecovery.

thanks but I installed gingercruzt 7.3 and then installed 7.4 works fine

[Q] Unable to flash GingerDx V023

I previously had GingerDx V022 and it was working perfect.
Today I tried to Flash GingerDx V023 Using Xrecovery V0.1
I even initiated a full wipe and also wiped dalvik cache etc etc
But every time I flash , I get stuck at the SE Logo , unable to go back to xrecovery. Then I have to use PCC And re-root all over again.
I tried to find CWM V014 , although Xrecovery always worked for GingerDx (all previous versions)
But couldn't find it.
I havent even customized GingerDx V023. Just tried to directly flash it after downloading.
Doesnt work
What is going wrong ?
Help Please I really want to upgrade to this ROM
Xperia X8 E15i
GingerDx V022
Stock Kernel

it's same problems with me. Just waiting for helping by another peoples

Use ClockworkMod - it's absolutely necessary. You could use toolbox http://forum.xda-developers.com/showthread.php?t=1117100 to obtain double recovery. Then just tap the screen (dual recovery) or buck button to access CWM.

Mayank77 said:
I previously had GingerDx V022 and it was working perfect.
Today I tried to Flash GingerDx V023 Using Xrecovery V0.1
I even initiated a full wipe and also wiped dalvik cache etc etc
But every time I flash , I get stuck at the SE Logo , unable to go back to xrecovery. Then I have to use PCC And re-root all over again.
I tried to find CWM V014 , although Xrecovery always worked for GingerDx (all previous versions)
But couldn't find it.
I havent even customized GingerDx V023. Just tried to directly flash it after downloading.
Doesnt work
What is going wrong ?
Help Please I really want to upgrade to this ROM
Xperia X8 E15i
GingerDx V022
Stock Kernel
Click to expand...
Click to collapse
gingerdx v13 and above needs to be flashed with cwm

kirmada said:
gingerdx v13 and above needs to be flashed with cwm
Click to expand...
Click to collapse
I flashed GingerDx V020,V021,V022 All with XRecovery
And
Using
http://forum.xda-developers.com/show....php?t=1117100 did not work for me... I tried all combinations.

what is your kernel?

Did you flash the fixed version of v23 for stock kernel ?

kenel
install the update immediately after installation and check the'' rom addons for stock kernel''

reginned land
There is a version v023b.
Try this

same problem with v23a.
i have reflashed with version b and it works
(stock kernel)

Thanks to the developers it works

gingerdx 023b
I have problem with my auto rotation after I use the camera. Rest is perjust perfect.
Currently using v.022 (stock kernel)
has v023 fix this?

Please help I think its hard brick :(

Hi everyone, first of all sry for my bad english... I really need yours help...Yesterday I rooted my friend's Xperia X8 (with SuperOneClick), flash CWM 3.0.2 with RecoverX program, then flash 4.0.2 CWM with 3.0.2, so I had a rooted and CWM"ed" 4.0.2 x8, I flashed GingerDX rom (stock kernel version) V028b,sure before I flashed GingerDX I did a nandroid backup with stock 2.1 rom (with CWM 4.0.2) and everything works fine but today ebuddy on the phone got fc and phone got random reboots....I said that no problem..."We just restore the stock backup"...Okay go to CWM (when I flashed GingerDX my CWM upgraded to 5.0.2) I went to CWM did Wipe/Data Wipe/Cache Wipe/Dalvik Cache, and Format/system then restore the stock backup but when It finished and I rebooted the phone, the phone stuck at white Sony Ericsson logo, and I cant go to cwm and I cant do anything... I think the problem is that the backup was made with CWM 4.0.2 and I restored with CWM 5.0.2...please help Ive gopt 3 hours to repair the phone. THANK you very much!

....... double posting i answered your question already at GDX bug list look for it

this no hard brick, this is soft brick...download flashtool and stock firmware then flash..

what he said you at the other thread or flash stock rom with flashtool

Thank you so much guys I solved the problem CHEERS!

flash back to 2.1 using pccompanion or seus.

skrillex13 said:
Thank you so much guys I solved the problem CHEERS!
Click to expand...
Click to collapse
Nice..
Sent from my X8 using Tapatalk 2

Need help bricked phone :(

i recently flashed the eXistenZ Ultra 2, and im sure i did everything fine, after flashing the rom in recovery and flashing suprsu and wifi fix, i powered off the phone, and powered on but sony logo has apeared until now , and welcoming`s sounding 999..times. i cant turn it off, or i should say i cant do anything.
please help,

After flashing ROM and the fixes you should flash the 12.1.A.0.266 Firmware with FlashTool!
If problem still persists:
http://xda-university.com/as-a-user/how-to-recover-from-a-bootloop
Take a look at this site A recovery would be quite useful, but I think the kernel of eXistenZ ROM has one. If not, you'll find one in the development section. Otherwise, use the ADB as solution.
Good luck

Thanx for the post!
I used force shut down and then flash the 254 rom, and did all those things, and the problem occured again.
does the recovery software have to be the touch recovery? I use CWM v6 that enables with volume +.
and i use SuperSU fix.zip rather than superUser.zip and generally i flash rom, supersu fix.zip and wifi fix.zip. i flashed those three, before first booting, do i have to boot first before flashing wifi fix.zip?

eefathi said:
Thanx for the post!
I used force shut down and then flash the 254 rom, and did all those things, and the problem occured again.
does the recovery software have to be the touch recovery? I use CWM v6 that enables with volume +.
and i use SuperSU fix.zip rather than superUser.zip and generally i flash rom, supersu fix.zip and wifi fix.zip. i flashed those three, before first booting, do i have to boot first before flashing wifi fix.zip?
Click to expand...
Click to collapse
I think you need to flash 12.1.A.0.266 instead of 12.0.A.2.254 after flashing ROM. You could also wipe data, cache and dalvik cache, reflash eXistenZ ROM and SuperSU fix (or SuperUser but SuperSU should be ok), shut down the phone with the option in recovery and then flash the 12.1.A.0.266 with FlashTool.
It doesn't matter which recovery you take. Use the one you like best. I'm not quite sure, but to go sure, please flash the wifi fiz.zip after first boot up!

Schokonuss said:
I think you need to flash 12.1.A.0.266 instead of 12.0.A.2.254 after flashing ROM. You could also wipe data, cache and dalvik cache, reflash eXistenZ ROM and SuperSU fix (or SuperUser but SuperSU should be ok), shut down the phone with the option in recovery and then flash the 12.1.A.0.266 with FlashTool.
It doesn't matter which recovery you take. Use the one you like best. I'm not quite sure, but to go sure, please flash the wifi fiz.zip after first boot up!
Click to expand...
Click to collapse
thanx again,
i flashed the 266 kernel before the first boot, and the rom runs correctly,
but ive got some new problems:
1. performance, when i click on performance, it closes unexpectedly and says it has stopped.
2. i used go backup for backing up from data in 4.1, but in this rom i restored my apps,the apps installed correctly but goBackup says the data restoring successfully finished , but the data didnt restored, by the way at the time i backed up from my apps&data, i swapped memories with that linux code that this forum did.

eefathi said:
thanx again,
i flashed the 266 kernel before the first boot, and the rom runs correctly,
but ive got some new problems:
1. performance, when i click on performance, it closes unexpectedly and says it has stopped.
2. i used go backup for backing up from data in 4.1, but in this rom i restored my apps,the apps installed correctly but goBackup says the data restoring successfully finished , but the data didnt restored, by the way at the time i backed up from my apps&data, i swapped memories with that linux code that this forum did.
Click to expand...
Click to collapse
You're welcome
1. Do you have SuperSU installed? On AOKP ROM I'm running it asked for superuser permission for ROM Control (the control center implemented in the settings of the ROM). Maybe it'll ask you if SuperSU is installed. Otherwise, because it is after the first boot it needs to rebuild cache and so on.. If problem persists after reboot, just use an other clock speed controler (No-frills CPU, SetCPU..)
2. If you did that at the same time, maybe Go Backup didn't really backup your data. Try again, if it doesn't work and if you have a nandroid backup (backup from recovery) you can go into recovery, then to advanced restore and restore data. Otherwise your data is unfortunately gone I think :/
PS: I prefer Titanium Backup