Related
Been having problems since flashing a Rogers stock Froyo Kernel yesterday. I made it back to stock but found I couldn't upgrade to any 2.2 ROMs, it seems that the ext4 lagfix was still activated on the Internal SD card and this prevented me from remounting anything on it or formatting. I am now stuck in recovery mode, although it is possible to get into download mode as well. I have access to CWM, and I've been farting around with wiping caches, formatting partitions, etc.
I have attempted everything I can think of to try to flash back to stock, including the Captivate tookbox 2.6 for Rogers, and the Odin 1-Click with the Master Clear option. Nothing seems to work. I get the classic message:
E: Can't mount /dev/block/stl10
(Invalid argument)
E: copy_dbdata_media:Can't mount DBDATA
The real problem seems to be that there is no update.zip on the internal sd card for me to use as a backup to flash back to stock. I am having no luck with the two software packages above, but it seems that if I could push my own backed-up update.zip I made a few days ago to the internal sd, I could get past this.
I need help. Please give me some advice.
Call off the dogs- after I installed the driver package that was included with Odin 1-Click I managed to get a master clear and a flash to the AT&T stock.
I must have spent 3 hours installing different driver packages today.
This has worked for me, depending on how bad the problem is...
Assuming the phone will boot, this will format the internal SD card.
GSM Master Reset: *2767*3855#
pkley said:
This has worked for me, depending on how bad the problem is...
Assuming the phone will boot, this will format the internal SD card.
GSM Master Reset: *2767*3855#
Click to expand...
Click to collapse
Thanks, I appreciate the reply. I couldn't get past recovery mode, so I couldn't access the dialer. I ended up getting the ODIN 1-click to flash the AT&T stock ROM, then I flashed back to my native Rogers Eclair.
Just in the process of getting Stock Froyo back on the handset.
A little information is a dangerous thing...
I have a samsung galaxy s, gt-i9000. It was on the t-mobile network. It stopped working one day and is now stuck on a boot loop. (It does go into download mode)
Can anyone help me? ps. I do not know the original firmware names etc.
Hooolagon said:
I have a samsung galaxy s, gt-i9000. It was on the t-mobile network. It stopped working one day and is now stuck on a boot loop. (It does go into download mode)
Can anyone help me? ps. I do not know the original firmware names etc.
Click to expand...
Click to collapse
If your phone goes in to download mode you can flash, using Odin, a full stock firmware.
Have you ever update it since you've bought it?
umberto1978 said:
If your phone goes in to download mode you can flash, using Odin, a full stock firmware.
Have you ever update it since you've bought it?
Click to expand...
Click to collapse
I have a problem saying Cant Mount sdcard
I have the exact same problem as ysr84.. When i click "reboot system now" it just goes back into the boot loop.
Also.. My phone does go into download mode.. I have tried to flash using Odin3 but get the image as ysr84.. My phone then repeats the boot loop sequence..
PS. I do not know which firmware the phone started with, I have been flashing with JVR.
Since I bought the phone I have not tried to update it, I think there was no available update.. =/ not 100% sure..
Although when flashing with JVR I get the "Can't mount etc"
Android system recovery <3e>
Enter: OK Key, Select : Vol UP / Vol Down
reboot system now
apply update from sdcard
wipe data/factory reset
wipe cache partition
_____________________________________
--Installing package...
Finding update package...
Opening update package...
Verifying update package...
Installing update...
Successfully installed package.
--Copying media files...
Successfully copied meida files.
--Wiping data...
Formatting /data
E:format_volume: rfs format failed on dev/block
/mmcblkop2
Formatting /dbdata...
Formatting /cache...
Deleting Meta Data
Data wipe failed.
-- Appling Multi-CSC...
Installing Multi-CSC
Applied the CSC-code 'KOR'
Successfully applied multi-CSC.
^This is the message I get after a fresh install using Odin3 with repartition selected. I had used the firmware package JVR.
ysr84 said:
I have a problem saying Cant Mount sdcard
Click to expand...
Click to collapse
Which firmware you tried to flash...and how? If you want more help about flashing follow http://www.hdtechvideo.com
anukilimanoor said:
Which firmware you tried to flash...and how? If you want more help about flashing follow http://www.hdtechvideo.com
Click to expand...
Click to collapse
Hello, I have tried to flash my phone with 'any' firmware as I do not know which firmware my phone was on before.
It maybe a trouble with partition.
You can try to re-virgin your phone by flashing an old eclair (JM8/JM9) firmware always using odin with pit 512, re-partition flagged.
Be careful if using a copy with bootloader.
After that (if phone boot regurarly) you can get any gingerbread firmware, obviusly if you used in the previous step bootloader for eclair firmware, than you'll get a copy of gingerbread with it's bootloader.
But i'm not sure this helps you.
Hope you solve this, guy.
umberto1978 said:
Be careful if using a copy with bootloader.
After that (if phone boot regurarly) you can get any gingerbread firmware, obviusly if you used in the previous step bootloader for eclair firmware, than you'll get a copy of gingerbread with it's bootloader.
But i'm not sure this helps you.
Hope you solve this, guy.
Click to expand...
Click to collapse
What do you mean by bootloader?
Hooolagon said:
What do you mean by bootloader?
Click to expand...
Click to collapse
If you, using 7ZIP, extract the archive PDA.TAR.MD5, from a package firmware with 3 files+pit512, you'll find boot.bin and sbl.bin.
boot.bin --> primary bootloader
sbl.bin --> secondary bootloader
I hope you don't mean what does a bootloader with your question.....
You'll have to try flashing different ODIN or Heimdall Stock builds. Unfortunately, it may or may not fix your problem. Make sure you have a USB Download Jig just in case because you'll probably get times where it looks like it won't turn on and its the only way to get it back up and running. If all else fails and your warranty is still intact, use it. These are the early signs of internal SD Card failure. If warranty is not an option, you should be able to use the external as your primary partition and lose the internal completely. Its what I'm doing currently on my i9000M with the infamous broken internal SD Card. My internal SD Card is gone completely but everything is running under my External SD Card perfectly.
Okay, so it's included within the three files + pit. That's okay, I thought there was more then four files after the extraction.. I am downloading JM8... Will tell you how I get on.
This time it said...
Android system recovery <2e>
Samsung recovery utils
for BML
reboot system now
apply update from sdcard
wipe data/factory reset
wipe cache partition
_____________________________________
E:copy_dbdata_media:format SDCARD:
Formatting SDCARD...
format_root_device: /dev/block/mmcblkop1format_r
fsdevice -> /dev/block/mmcblkop1
format_vfat_device -> argv[1] :-F
format_vfat_device -> argv[2] : 32
format_vfat_device -> argv[3] :-0
format_vfat_device -> argv[4] : android
format_vfat_device -> argv[5] : /dev/block/mmcbl
kop1
update media, finished
#MANUAL MODE#
-- Appling Multi-CSC...
Installing Multi-CSC
mps_dat value: KOR
copy_multi_carrier from: KOR
multicsc : can not acces tp /system/csc/KOR/system/
copy_common_data
^That's what happend when I flashed with JM8, (I had only flashed with PDA and repartition unchecked, due to phone and csc missing from the download.)
I will now click reboot system now...
dawgpound6985 said:
You'll have to try flashing different ODIN or Heimdall Stock builds. Unfortunately, it may or may not fix your problem. Make sure you have a USB Download Jig just in case because you'll probably get times where it looks like it won't turn on and its the only way to get it back up and running. If all else fails and your warranty is still intact, use it. These are the early signs of internal SD Card failure. If warranty is not an option, you should be able to use the external as your primary partition and lose the internal completely. Its what I'm doing currently on my i9000M with the infamous broken internal SD Card. My internal SD Card is gone completely but everything is running under my External SD Card perfectly.
Click to expand...
Click to collapse
Could you perhaps guide me on how to do so, I also think my internal SD CARD is also "buggered"..
Thanks in advance..
Woah WOAH WOAH HAHAHA!... Its alive... slightly! It turns on with the galaxy S logo and does some sort of sound thing.. =/ then turns off! But wahay!... Thanks Umberto1978..
I did this by first flashing JM8 PDA with repartition off...
Then flashing JM1 PDA PHONE AND CSC WITH 512 PIT...
on restart this happened..
Sure. This is what I did on my i9000M. Internal SD Card is useless so everything is now running off my External 8 GB microSD.
Go to this page and grab Heimdall and JVT build:
http://forum.xda-developers.com/showthread.php?t=1196179
Heimdall: http://www.glassechidna.com.au/products/heimdall/
JVT: http://www.multiupload.com/QMORULUWRQ
ODIN may work but I haven't tried it out myself and the packages above are made specifically for Heimdall. Set up Heimdall along with its specific drivers (included in Heimdall) to allow it to flash the phone.
- Make sure you have an external SD Card in your phone and make sure its formatted to FAT32.
- Flash the Heimdall JVT build with repartion checked using Heimdall
- Once it reboots, it'll try to format the SD Card but fail to do so and give you an error message. Ignore it and reboot the phone.
- It should now boot into Stock JVT firmware. If you go to your Storage under settings, you'll notice that Internal and External SD Card will be unavailable which is expected. You'll have 2 GB of internal storage for apps and whatever other things.
- You have two options here: 1) Continue using stock JVT; 2) Flash a custom ROM.
So let's say you want to flash a custom ROM like Cyanogenmod or MIUI. Fire up Heimdall again and go back into download mode. Flash the CF-Root for JVT kernel by Chainfire using Heimdall:
http://forum.xda-developers.com/showpost.php?p=15188469&postcount=9
This will allows you to flash CWM files. You can now install Cyanogemod or whatever custom ROMs you like.
Switching the primary partitions:
Cyanogenmod has a setting where you can switch the primary partitions in Cyanogenmod settings.
Cyanogenmod Settings --> Application --> UNCHECK use internal storage --> Reboot. Your External SD Card will now be the primary partition.
For myself, I am currently running Galnet's MIUI ICS. It doesn't have the Cyanogenmod settings above. I instead use the vold.fstab trick to switch the two partitions. If you navigate to "system/etc" folder, you'll see a file called vold.fstab. Open it with Notepad++ or some other note editor. You'll see the following (this is only for Galnet's MIUI, other ROMs will have something similar. Just switch the partitions like below):
Code:
# internal sdcard
dev_mount sdcard /mnt/sdcard/external_sd auto [U]/devices/platform/s3c-sdhci.0/mmc_host/mmc0[/U]
# external sdcard
dev_mount emmc /mnt/sdcard 1 [U]/devices/platform/s3c-sdhci.2/mmc_host/mmc2[/U]
Switch the two underlined around and push the vold.fstab back into system/etc/ and put the correct permissions. Your external card will now be your primary partition and your internal SD card (unavailable) is the external.
So why switch the partitions? You don't necessarily have to but if you want your phone storage to be neat, do it as it changes your sdcard mounts around, etc. You'll also get back USB mounting functions which you can't do with the internal storage being unavailable and the primary partition.
Hooolagon said:
Woah WOAH WOAH HAHAHA!... Its alive... slightly! It turns on with the galaxy S logo and does some sort of sound thing.. =/ then turns off! But wahay!... Thanks Umberto1978..
I did this by first flashing JM8 PDA with repartition off...
Then flashing JM1 PDA PHONE AND CSC WITH 512 PIT...
on restart this happened..
Click to expand...
Click to collapse
Yeah unfortunately, you have the dreaded Galaxy S bootloop. Internal SD Card is probably toast. You can test this by removing the External SD Card and trying to boot. It most likely won't get as far. What happened is that ODIN flashed Android to your external card and trying to boot off it.
I have tried to use heimdall, and once it had loaded and the phone rebooted I did get the error message, however after ignoring this, once I had rebooted the phone it goes back into the boot loop.?
Hooolagon said:
I have tried to use heimdall, and once it had loaded and the phone rebooted I did get the error message, however after ignoring this, once I had rebooted the phone it goes back into the boot loop.?
Click to expand...
Click to collapse
Have you tried reformatting your external SD Card? Just format it to FAT32 and then try again. Also, first boot may take a few minutes. You can verify that its booting fine by using logcat if you have ADB installed on your computer.
Flash jm9 mate, not jm8. Seems to resurrect better. With odin. Pit 512 with Repartition.
Sent from my GT-I9000 using xda premium
Hooolagon said:
Woah WOAH WOAH HAHAHA!... Its alive... slightly! It turns on with the galaxy S logo and does some sort of sound thing.. =/ then turns off! But wahay!... Thanks Umberto1978..
I did this by first flashing JM8 PDA with repartition off...
Then flashing JM1 PDA PHONE AND CSC WITH 512 PIT...
on restart this happened..
Click to expand...
Click to collapse
I am at work but will give this a shot... I also found a lot of people resolved problem by using JM8 with repartition and 512 pit
then with JPM & pit 803 with no repartition ticked...
Use Odin 1.3... 1.8 wont allow you to tick and untick with a repart file...
Will post results tonight... its been two days and i have tried everything...
Evening,
After trying nearyl everything I found online to get my phone back into a working state I finally gave up and decided to ask
you for help.
So, it all began with me trying to flash the Jelly Bean Port onto my SGS in the hope it would fix my constant crashes and other problems
I had after another flash.
I got it working at some point, but it did not react when I plugged it in the usb port as mass storage device or any other mode for that matter.
So I tried some other solutions.
A couple tries later i started getting the "cant mount /dbdata" error which i fixed with a solution from this forum using a dbata.tar as PDA, using the JW4 firmware.
However because I wanted the usb to work I tried again to get jelly bean to run, without success.
I'm no unable to boot the phone passed "Enter your password to decrypt storage" or in any other mode.
When flashing I keep getting "Failed to mount /data" which seems to disappear at times when the external sd is inserted.
My Computer regocnizes the Phone as two different drives, even when i remove the sd...
So yeah.
The moral of the story is: I cant get the phone to run on any mode except jellybean and there without usb connection, if i get passed the decrypt thing.
Currently all flashing leads me to the recovery screen saying:
"Can't mount /data " and "Cache wipe failed" after that it just bootloops.
So, can anyone help me out?
P.S. I can at all times enter recovery and download mode.
Hey
If u can enter download mode, why dont u flash 2.3.6??that should clean all your problems..
Plus if you upgrade to JB your external sd-card wont be mounted to ur system...(you cannot alter any data directly to your external sdcard...
There are 3 ways to solve your prob..
1.use CWM..
--goto mounts and storage, then hit external sdcard..
2.use your external memory card directly with ur system..that means without your phone
3.(long method)
Transfer ur data to internal sdcard then use a file manager and transfer to external memory card
Cheers
If I Helped, dont mind Hitting the Thanks button...
Flashing an old Stock Rom mostly fixes all problems for me and should do the same for you
Sent from my GT-I9001 using xda app-developers app
Hi,
Thanks for the answers.
Flashing an old Stock Rom mostly fixes all problems for me and should do the same for you
Click to expand...
Click to collapse
I tried this approach and flashed the JVU Version from samfirmware.
It leads to the following error:
Code:
Failed to mount /sdcard (file exists)
(...)
Format_volume: rfs format failed on /dev/block/mmcblk0p2
During the boot up, after the first flash.
Note: The external SD-Card was not in the phone, as well as the sim card.
After that it starts bootlooping.
If I insert the external SD-Card before the flashing process i only get:
Code:
Format_volume: rfs format failed on /dev/block/mmcblk0p2
And the Phone starts to bootloop again.
I've tried to google this and I get two reactions:
The internal SD is fried.
Format the internal SD using CWM.
I believe I did try the second approach, but i would greatly appreciate a short guide on how-to properly format my internal SD
There are 3 ways to solve your prob..
Click to expand...
Click to collapse
I was under the impression they had fixed that bug in V6.
Anyway, it's not the real problem since I would rather get my phone to work again, before I go ahead and try out jelly bean again.
The ics semaphore.tar odin kernel from the semaphore thread has worked for everyone I've suggested it to.
For some reason it seems to work where other flashable packages don't, worth a try.
Sent from horseback.
First of all I flash stock firmware. / 3 PDA files, MODEM, CSC / odin with the pit512 and Re-partition.za second is that the flash / ICS, JB / clearing script to use the kernel, then the full wipe and cwm JB installation ....
adytum said:
The ics semaphore.tar odin kernel from the semaphore thread has worked for everyone I've suggested it to.
.
Click to expand...
Click to collapse
Did you mean this Semaphore Thread?
If so, just tried it, didnt work, still get the same error as before:
Code:
Format_volume: rfs format failed on /dev/block/mmcblk0p2
misacek said:
First of all I flash stock firmware. / 3 PDA files, MODEM, CSC / odin with the pit512 and Re-partition.za
Click to expand...
Click to collapse
At this Point, I get the first error concering the formating, see above.
If I still continue and manage to get JB to work (I event tried the kernel cleaning script). I get locked out because of this "Enter password to
decrypt storage" Error. Which is known to be fixed by performing a factory reset, which I cant do, because of the first error.
f_erin said:
I get locked out because of this "Enter password to
decrypt storage" Error. Which is known to be fixed by performing a factory reset, which I cant do, because of the first error.
Click to expand...
Click to collapse
try and enter any password five times until prompted that this will wipe the card, than you should be able to do so
So, today I decided to buy a new smartphone after one last try of getting my old one to work.
I used the default guide to flash JellyBean and now it works ...
I guess it was scared or something, I'll keep using it to check of fluently it works for now and bought and sd reader to solve the usb issue.
So this thread can be closed.
Thanks to all for their tips.
My Cappy is having some serious issues! It used to run slimROM 4.2 and untill the night that it started illuminating the ceiling of my room with the ATT bootloader logo. I woke up checked it out and... nothing would run. System kept rebooting without end. As I am a somewhat knowledgeable flasher got into recovery mode and flashed my rom again. It went to the ATT bootloaders then it showed the slimROM logo as if it were to load it and then the screen went off. Dead!
I tried Heimdall SamsungCaptivate-SGHi897-UCKB2-Rooted-One-Click without any success.
Last, I tried returning it to stock using ODIN and this is the error message that I get
--Copying media files...
E:failed to mount /sdcard (no such file or directory
E:copy_dbdata_media:Can't mount /sdcard your storage not prepared yet. Please use UI menu for format and reboot actions.
Media files copy failed.
--Wiping data...
Formatting /data...
E: format_volume: rfs format failed on dev/block/mmcblk0p2
Formatting /dbdata...
Formating /cache...
Data wipe failed.
-- Applying Multi-CSC...
Installing Multi-CSC
Applied the CSC-Code 'ATT'.
Successfully applied multi-CSC
Click to expand...
Click to collapse
.
That's it. I think my /sdcard is dead. Are there any other possibilities and maybe a chance to bring my phone back to life? Please help!!!
I will be generous to anyone who can help.
Best
frenzisor said:
My Cappy is having some serious issues! It used to run slimROM 4.2 and untill the night that it started illuminating the ceiling of my room with the ATT bootloader logo. I woke up checked it out and... nothing would run. System kept rebooting without end. As I am a somewhat knowledgeable flasher got into recovery mode and flashed my rom again. It went to the ATT bootloaders then it showed the slimROM logo as if it were to load it and then the screen went off. Dead!
I tried Heimdall SamsungCaptivate-SGHi897-UCKB2-Rooted-One-Click without any success.
Last, I tried returning it to stock using ODIN and this is the error message that I get
.
That's it. I think my /sdcard is dead. Are there any other possibilities and maybe a chance to bring my phone back to life? Please help!!!
I will be generous to anyone who can help.
Best
Click to expand...
Click to collapse
When you tried Heimdall, did you use a different USB port?
Also, is that quote from Odin/Heimdall? If so, you might wanna try other GB versions (Heimdall UCKF1 worked for me before when Odin KK4 didn't).
Another thing, do you have a external sd? If so, try booting with it in.
Booting of External SD card
BWolf56 said:
When you tried Heimdall, did you use a different USB port?
Also, is that quote from Odin/Heimdall? If so, you might wanna try other GB versions (Heimdall UCKF1 worked for me before when Odin KK4 didn't).
Another thing, do you have a external sd? If so, try booting with it in.
Click to expand...
Click to collapse
I the quote is from Odin. What is extremely weird is that right after i posted this. My phone booted into GB. I then proceeded to see what my storage was doing and it turns out that I am somehow (I am not sure how this happened) i am running of my External SD card. My phone still can't see any internal SD card. Any suggestions?
Should i try to use ROM manager and flash recovery and try a ROM from there?
I am still worried that my Internal SD is not working.
frenzisor said:
I the quote is from Odin. What is extremely weird is that right after i posted this. My phone booted into GB. I then proceeded to see what my storage was doing and it turns out that I am somehow (I am not sure how this happened) i am running of my External SD card. My phone still can't see any internal SD card. Any suggestions?
Should i try to use ROM manager and flash recovery and try a ROM from there?
I am still worried that my Internal SD is not working.
Click to expand...
Click to collapse
***First of all, don't touch ROM Manager, it doesn't do well with the Captivate.
Custom recovery is flashed through kernels with Odin 1.18 (or 1.17). You simply grab the .tar file and put it in the PDA slot while you phone is in download mode. (On stock GB, you'll want Corn kernel)
Now my guess is that your external sd needs reformat. Backup w/e is on it (same with your internal if you can access it from your pc) and full format it to FAT32. If that alone doesn't fix it, wipe your internal as well.
Hi at all, I've a problem with my samsung galaxy note n7000, I have the latest 4.1.2 original samsung touchwiz , I've only rooted it,
the problem is that the android os doesn't mount the internal sd card, and get me a notification that say "blank usb memory or not supported file system", I tried to reboot custom recovery(philz recovery) and wipe data and cache, format sd card but nothing works, can anyone help me????
Did you format it to fat32? In recovery did you try formating the external storage?
diaboliko.hacker said:
Hi at all, I've a problem with my samsung galaxy note n7000, I have the latest 4.1.2 original samsung touchwiz , I've only rooted it,
the problem is that the android os doesn't mount the internal sd card, and get me a notification that say "blank usb memory or not supported file system", I tried to reboot custom recovery(philz recovery) and wipe data and cache, format sd card but nothing works, can anyone help me????
Click to expand...
Click to collapse
*bump
I'm facing the same problem right now. It occurred after I did a hard reset. In the best case scenario, this is just a partition table corruption, but in the worst, a physically damaged card.
On Linux, I have fixed partition tables with a nifty tool called gpart (not gparted). There is a similar utility available for Linux, Windows, Mac etc. called TestDisk. Unfortunately, these tools are not available on Android. However, there is something called aparted available on Play Store that supposedly fixes filesystems.
I have installed it, but it wants to install some browser addons too. I've tried to repair the filesystem that it shows as empty, but no luck so far. I will shortly check its online manual, but I hope we can get something like gpart on Android.
diaboliko.hacker said:
Hi at all, I've a problem with my samsung galaxy note n7000, I have the latest 4.1.2 original samsung touchwiz , I've only rooted it,
the problem is that the android os doesn't mount the internal sd card, and get me a notification that say "blank usb memory or not supported file system", I tried to reboot custom recovery(philz recovery) and wipe data and cache, format sd card but nothing works, can anyone help me????
Click to expand...
Click to collapse
Hi, I have been able to get the Internal SDCard (/storage/sdcard0) mounted again, albeit with loss of data. Look at my recent post http://forum.xda-developers.com/showpost.php?p=48595569&postcount=24
and the one from which I got the hint
http://forum.xda-developers.com/showpost.php?p=35726016&postcount=6
The step by step procedure is here: http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12
but if you have only one partition damaged, you could just check it with e2fsck and then, if necessary, recreate it with mkfs.exfat or the other method in the referred post.
EDIT: link to parted and other files: http://forum.xda-developers.com/showpost.php?p=38598228&postcount=4
http://www.droidforums.net/forum/htc-droid-eris/78650-internal-storage-partitions-screwed-up.html
I don't know if you can recover your original data - I had tried formatting the partition, by mistake, to ext4 with mke2fs. You could avoid this, and see if you can back up your partition with dd before re-formatting it to fat32.
solved, I download latest frimware, and flash it throught odin and all are fixed