Related
Support Has been Dropped for xda...
Please Delete Thread Mods.
~Eugene
Great work.
Lets see the tests
Good to see you on here Eugene
Sent from my SGH-T959 using XDA App
can you add mimocan lag fix to this? Thanks
Im waiting for a ginny pig to try the test flash hehehee
rhcp0112345 said:
Im waiting for a ginny pig to try the test flash hehehee
Click to expand...
Click to collapse
I always Test & make sure My stuff works 100% before I post anything..
P.S.
You need to Wipe before Flashing via ClockworkMod Recovery..
Currently Testing the zImage Flash atm, so I'll likely have an update shortly that lets you flash the zImage as well.
thang422 said:
can you add mimocan lag fix to this? Thanks
Click to expand...
Click to collapse
Please Post a Link.
Which was the zImage again? Kernel?
rhcp0112345 said:
Which was the zImage again? Kernel?
Click to expand...
Click to collapse
Correct
I can't post the link... Im not allow too
showthread.php?t=727279
do we put the stock vibrant file on the memory card or the internal storage ?
sorry its methood 2 that is needed.
Thanks
showthread.php?t=727279
fivestar0234 said:
do we put the stock vibrant file on the memory card or the internal storage ?
Click to expand...
Click to collapse
internal storage
thanks. it works great!
So (just to be clear) Do I download this, rename it to update.zip, then "reinstall" in recovery?
Or do i have to install rom manager, and flash from its boot screen
basataom said:
So (just to be clear) Do I download this, rename it to update.zip, then "reinstall" in recovery?
Or do i have to install rom manager, and flash from its boot screen
Click to expand...
Click to collapse
Don't Rename, well you can... But never rename to update.zip as this is how Clockwork is Used.. You select from install from .zip & select the name...
You and do either
adb reboot recovery from cmd prompt once you Have the update.zip downloaded from Rom Manager
or
You can Flash from Rom Manager.
Hey,
Great work here.
but, one question. I was told by koush during our talks about getting the bricks un-bricked that the only way to flash the baseband/radio was through odin.
does this flash the radio/baseband?
Thanks. Just want to clarify.
rhcp0112345 said:
Hey,
Great work here.
but, one question. I was told by koush during our talks about getting the bricks un-bricked that the only way to flash the baseband/radio was through odin.
does this flash the radio/baseband?
Thanks. Just want to clarify.
Click to expand...
Click to collapse
This only flashes the system partition that is all.
ah ok. so its the same as the nandorid backup only using the stock-firmware.
Gotcha. Just wanted to be clear what is what
Eugene got a vibrant nice
Sent from my SGS Vibrant using tapatalk
This is More useful for
- Themes
- Removal Of Bloat Ware
- Mod's & Edits
- etc....
All the Heavy stuff ie.. radio / zImage etc... needs to be flashed by odin flasher.
Also, this Man justanothercrowd knows his Stuff, so remember that
P.S.
Those using ODIN Flasher,
There should never be a Reason to select Reformat Partitions unless Samsung Tells us to!
Hey,
I am trying to fix a friends optimus black. He has CWM recovery installed but when I flash ROMs then reboot system, it just boots straight back to the recovery. Is there anything I am doing wrong? I have tried 3 different ROMs from the dev section, ICS, GB and JB. I make sure to do a full wipe between flashing.
Many thanks, as I don't have much experience with this phone. (Although I have many years experience with flashing android roms)
RolloJarvis said:
Hey,
I am trying to fix a friends optimus black. He has CWM recovery installed but when I flash ROMs then reboot system, it just boots straight back to the recovery. Is there anything I am doing wrong? I have tried 3 different ROMs from the dev section, ICS, GB and JB. I make sure to do a full wipe between flashing.
Many thanks, as I don't have much experience with this phone. (Although I have many years experience with flashing android roms)
Click to expand...
Click to collapse
Reflash with Smart Flash Tool. A few kernels automatically go to recovery if they fail to load. I can't think of anything else.
Try changing your CWM Recovery by flashing another version. Use my CWM Recovery flasher (in my signature).
thanks, i tried changing CWM using your flasher, but it still didnt work.
I cant use the smartflasher as all the links are broken...
RolloJarvis said:
thanks, i tried changing CWM using your flasher, but it still didnt work.
I cant use the smartflasher as all the links are broken...
Click to expand...
Click to collapse
Did you go in to s/w upgrade mode?and did you use the links in n00by's how-to guide?
Sent from my LG-P970 using xda app-developers app
UniversalSS said:
Did you go in to s/w upgrade mode?and did you use the links in n00by's how-to guide?
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Yes but the links in the guide link to the smart flasher thread where the links are broken... So I can't use the tool. Any ideas?
RolloJarvis said:
Yes but the links in the guide link to the smart flasher thread where the links are broken... So I can't use the tool. Any ideas?
Click to expand...
Click to collapse
What do you need? Some ROMs to flash? Find links to kdz files in post 3. Extract and root it yourself (also see post 3 on my how to).
might be redundant saying this but in cwm itself have you flashed the 6.0.1.4 update within itself ald?
N00BY0815 said:
What do you need? Some ROMs to flash? Find links to kdz files in post 3. Extract and root it yourself (also see post 3 on my how to).
Click to expand...
Click to collapse
I was trying to follow the unbricking guide in this thread: http://forum.xda-developers.com/showthread.php?t=1448803
but the links for the following are broken:
stock ROM V10A EEU XXX with .bin & .fls. [CRC MD5: d880b8834400575b5827bafbf29a745e] - DepositFiles, FileServe, WUpload.
Other bin/fls ROMs are HERE. (All these links are working again!)
You need to install LG Mobile drivers. They are located HERE. [CRC MD5: e4614071e72c0292d3a8238908b5c7ba]
Click to expand...
Click to collapse
Also, I am on CWM 6.0.1.4 but now I get an error when I try to choose a zip from the SD card "E: Can't mount /sdcard"
Cheers for the help.
EDIT: managed to find the files... will update soon.
EDIT 2: Flashed the official firmware with smart flasher, now im in a bootloop with the "firmware update" screen, first I had a BSOD.
Im about to flash the V20a files using smart flasher. fingers crossed.
EDIT 3: Flashing worked via smart flashing tool... BUT I'M STILL STUCK IN CWM RECOVERY!
any ideas?
Thanks
RolloJarvis said:
I was trying to follow the unbricking guide in this thread: http://forum.xda-developers.com/showthread.php?t=1448803
but the links for the following are broken:
Also, I am on CWM 6.0.1.4 but now I get an error when I try to choose a zip from the SD card "E: Can't mount /sdcard"
Cheers for the help.
EDIT: managed to find the files... will update soon.
EDIT 2: Flashed the official firmware with smart flasher, now im in a bootloop with the "firmware update" screen, first I had a BSOD.
Im about to flash the V20a files using smart flasher. fingers crossed.
EDIT 3: Flashing worked via smart flashing tool... BUT I'M STILL STUCK IN CWM RECOVERY!
any ideas?
Thanks
Click to expand...
Click to collapse
Wipe data, cache, then go to advanced, wipe dalwik, go back, go to mounts&Storage, mount as mass storage device, put any ROM you want on your sd card, go back, install zip from sd card, choose zip and install the ROM you downloaded
N00BY0815 said:
Wipe data, cache, then go to advanced, wipe dalwik, go back, go to mounts&Storage, mount as mass storage device, put any ROM you want on your sd card, go back, install zip from sd card, choose zip and install the ROM you downloaded
Click to expand...
Click to collapse
I have just done exactly these steps. I have tried flashing both the zeus rom and AOKP jelly bean build 4. Each time the ROM flashes successfully, however when I select "reboot system now," it just boots straight back to recovery again...
The only thing I could think of trying would be to restore a nandroid with cwm. I dont have one though, can anyone link me to a working nandroid, or upload one?
thanks
A crazy idea......
Stuck G key?
Sent from my LG-P970 using xda premium
could be... I havent got the phone at the moment but ill check next week. Not sure how i'd fix it though
got the phone back again... when i go into CWM "Key Test" option, it implies "button 0" is being pressed repetitively. Anyone know which button this is?
Dear Community, greetings.
I have a problem as wrote in the title: I can't boot into cwm recovery. I am gonna try to summarize the main points that lead me here.
Assumption
I used to install custom ROMS flawlessy, following always the instruction etc...
Last rom I've installed was CM7.2 Apocalypse, Project Silk and Link2SD
I needed to restore stock rom
I searched with Google and came across the following solutions
I searched on XDA and came across the following solutions
What I have done...
I flashed using odin 4.38 -> GB 2.3.6 2012 October 2.3.6 S5830XWKTS S5830ITVKT2 downloaded from sammobile.com
I rooted the phone with upd_1.zip (that is attached to this thread)
I tried to install recovery-clockwork-5.0.2.6-galaxyace-fix.zip
...and trying to boot into recovery pushing POWER BT + HOME BT the phone stucks on the screen with "Galaxy GT-S5830" and the top-left corner was green
What I have done #2
I tried to use S5830XXKA6 but I dind't neither managed to boot properly (wiped data/factory and cache)
Tried to flash CWM directly with Odin using "One Package"
Could you kindly help me out?:fingers-crossed: I am also willing to give you further information as you ask.
Thanks everyone for your time.:good:
F.
---- PARTIAL FIX by myself ----
1. Format the sdcard in linux with GParted (you need to install android-tools-adb, android-tools-fastboot)
2. Flashed stock firmware S5830XWKTS S5830ITVKT2 with ODIN Multidownloader 4.38 (downloadeble from www.sammobile.com under ITALY)
3. Rooted with upd_1.apk and updated with Superuser 3.0 (attached)
4. Installed CWM 6.0.1.4
5. Restore an old backup of mine.
6. Rejoice
But your Phone is still working right ?
I mean you are able to use ur stock firmware ryt ?
Vishrut Chhajer said:
But your Phone is still working right ?
I mean you are able to you ur stock firmware ryt ?
Click to expand...
Click to collapse
First of all, thank you very much for the reply. Then, the answer is yes and no. I flashed several firmwares. Some of them did work, others don't. Right now I managed to use the one I've mentioned before and
S5830XWKT7_S5830ITVKT1_ITV
S5830XWKP6_XWKPN
but trying S5830_XXKA6 it goes in bootloop also wiping data and cache.
Further information:
I noticed a problem with CSC. While booting in standard recovery an error message appeared saying something like "can't open /system/csc/XEU/system", so I've created the whole directory path and put the files that were in /system/csc inside. This issue is fixed. I am going to investigate and let you know if with other firmware I listed above I get the same behaviour.
Re: [TS] Galaxy Ace S5830 - Can't boot into cwm recovery
Use the old cwm recovery 5.0.2.4 instead of 6
It was madde by ketut kumajaya
Sent from my ST25i using xda app-developers app
Re: [TS] Galaxy Ace S5830 - Can't boot into cwm recovery
SpaceCaker said:
Use the old cwm recovery 5.0.2.4 instead of 6
It was madde by ketut kumajaya
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
He flashed with Odin, so his recovery must have been flashed back to stock. :/
@OP, flash a "Full-package" file with Odin and see what happens
Re: [TS] Galaxy Ace S5830 - Can't boot into cwm recovery
You could alwayd manually move recovery.img with dd commands to your partitions
But atleast you should have recovery 3e if you reflashe odin rom
Sent from my ST25i using xda app-developers app
@everyone thanks for joining the discussion!:good:
SpaceCaker said:
Use the old cwm recovery 5.0.2.4 instead of 6
It was madde by ketut kumajaya
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
@SpaceCaker I didn't manage to find it across the web, could you kindly point me a resource, or attach it, please?
Prawesome said:
He flashed with Odin, so his recovery must have been flashed back to stock. :/
@OP, flash a "Full-package" file with Odin and see what happens
Click to expand...
Click to collapse
@Prawesome I tried with several all-in-one package (S5830XWKT7 I yet said, and...):
S5830XWKS2_S5830XENKS1_S5830XWKS2_HOME.tar.md5
I also tried to root with upd_1.zip (and did it successefully) and after to updating the xbin/su to the latest version 3.3.1 flawlessy, too.
But... (keep reading)
SpaceCaker said:
You could alwayd manually move recovery.img with dd commands to your partitions
Click to expand...
Click to collapse
@SpaceCaker I don't know how to do it. Could you explain, please?
SpaceCaker said:
But atleast you should have recovery 3e if you reflashe odin rom
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
@SpaceCaker I have the standard Samsung Recovery 3e, complaying about csc and its location (that I could fixed as I said above).
Right know I've also tried to flash cwm 4.0.0.9 without any success. Always stucked to GT-S-5830-www.samsung.etc... screen
Let me know if you want more infos.
Thanks,
F.
Re: [TS] Galaxy Ace S5830 - Can't boot into cwm recovery
Fandonius said:
@everyone thanks for joining the discussion!:good:
@SpaceCaker I didn't manage to find it across the web, could you kindly point me a resource, or attach it, please?
@Prawesome I tried with several all-in-one package (S5830XWKT7 I yet said, and...):
S5830XWKS2_S5830XENKS1_S5830XWKS2_HOME.tar.md5
I also tried to root with upd_1.zip (and did it successefully) and after to updating the xbin/su to the latest version 3.3.1 flawlessy, too.
But... (keep reading)
@SpaceCaker I don't know how to do it. Could you explain, please?
@SpaceCaker I have the standard Samsung Recovery 3e, complaying about csc and its location (that I could fixed as I said above).
Right know I've also tried to flash cwm 4.0.0.9 without any success. Always stucked to GT-S-5830-www.samsung.etc... screen
Let me know if you want more infos.
Thanks,
F.
Click to expand...
Click to collapse
The 3e recovery also complains about csc on stock rom
Even on froyo
Will upload the cwm5 i used
Sent from my ST25i using xda app-developers app
SpaceCaker said:
The 3e recovery also complains about csc on stock rom
Even on froyo
Will upload the cwm5 i used
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
Thanks, could you please upload the firmware you used, too?
Ok some little news:
I managed to flash CWM 6.0.1.8, tried to restore some of my old nand backup (also having mismatch and tricking it emptying the nandroid.md5) but had problems with linked partition sd-ext.
Obtained this error
make_extf4fs /block/mmcblk0p2
Click to expand...
Click to collapse
So tried to wipe/format, but after it stuck on boot.
Still waiting for the cwm 5.0.2.4. Can someone post it?
Thanks
So, thanks for your help . I managed to solve it by myself.
And here's how:
1. Format the sdcard in linux with GParted (you need to install android-tools-adb, android-tools-fastboot)
2. Flashed stock firmware S5830XWKTS S5830ITVKT2 with ODIN Multidownloader 4.38 (downloadeble from www.sammobile.com under ITALY)
3. Rooted with upd_1.apk (attached)
4. Installed CWM 6.0.1.5
5. Restore an old backup of mine.
6. Rejoice
Fandonius said:
So, thanks for your help . I managed to solve it by myself.
And here's how:
1. Format the sdcard in linux with GParted (you need to install android-tools-adb, android-tools-fastboot)
2. Flashed stock firmware S5830XWKTS S5830ITVKT2 with ODIN Multidownloader 4.38 (downloadeble from www.sammobile.com under ITALY)
3. Rooted with upd_1.apk (attached)
4. Installed CWM 6.0.1.5
5. Restore an old backup of mine.
6. Rejoice
Click to expand...
Click to collapse
6.0.1.5 it's bugged. So I am trying to get back to 5.0.2.6 but still being stucked on the Galaxy Ace Logo.
Fandonius said:
6.0.1.5 it's bugged. So I am trying to get back to 5.0.2.6 but still being stucked on the Galaxy Ace Logo.
Click to expand...
Click to collapse
Get in odin and flash cwm5 odin flashable version u can in dev thread
Sent from my GT-S5830 using xda app-developers app
R: [PARTIALLY-SOLVED] Galaxy Ace S5830 - Can't boot into cwm recovery
SnowPluralism said:
Get in odin and flash cwm5 odin flashable version u can in dev thread
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
Thanks for joining the discussion!
I've tried but got stuck to the boot screen with galaxy ace logo and green corner. Could someone tell me where to look to get more info? I mean log, or test I can do... It's so strange I can only flash 6.0.1.5.
Fandonius said:
Thanks for joining the discussion!
I've tried but got stuck to the boot screen with galaxy ace logo and green corner. Could someone tell me where to look to get more info? I mean log, or test I can do... It's so strange I can only flash 6.0.1.5.
Click to expand...
Click to collapse
Leave cwm 6 ....flash stock rom via download mode and then flash cwm 5!
Sent from my GT-S5830 using xda app-developers app
I tried with no success. Please let me know how to give you more information if you need.
Thanks for your answering.
I got the same problem, I googled and a link lead me to here.
I try to flash PX Recovery, but the result is same, stuck on boot logo.
Fandonius said:
I tried with no success. Please let me know how to give you more information if you need.
Thanks for your answering.
Click to expand...
Click to collapse
If u already flashed cwm with rom manager theres nothing u can do about it!
Sent from my GT-I9300 using XDA Premium HD app
Try flashing this:
CWM 5.0.2.6. FIX
When your system reboot, wait until Android boot again, install TERMINAL EMULATOR's app and type this commands:
Code:
su
reboot recovery
After you've done it, your device'll reboot into recovery mode automatically
Viper The Ripper said:
Try flashing this:
CWM 5.0.2.6. FIX
When your system reboot, wait until Android boot again, install TERMINAL EMULATOR's app and type this commands:
Code:
su
reboot recovery
After you've done it, your device'll reboot into recovery mode automatically
Click to expand...
Click to collapse
Tried and doesn't work. Still stuck on boot logo
Hello, my problem i can not chnage the kernel and costume rom, but i used already costume rom and i could change kernel also. One month ago i put back official rom and now, if i want to install any rom it is starting but after couple of minutes stop with error. I have open bootloader end root. Please help me. Sorry for my english and thanks the help.
spytom said:
Hello, my problem i can not chnage the kernel and costume rom, but i used already costume rom and i could change kernel also. One month ago i put back official rom and now, if i want to install any rom it is starting but after couple of minutes stop with error. I have open bootloader end root. Please help me. Sorry for my english and thanks the help.
Click to expand...
Click to collapse
Update your recovery to the latest version.
JoinTheRealms said:
Update your recovery to the latest version.
Click to expand...
Click to collapse
Thx, i try it now,i will let u know what happened. Thanks again.
Hello, i'v tried your tip, but still can not flash. I installed CWM. I saw the failed massege and it says, somthing wrong with my sd card. In CWM i can not format, mount and partitioning. But the phone and my laptop see my sd card and no have probleme with it. Maybe my sd card large? It is 8 Gb. The message is: Error (7) sd card, but if i put recovery zip in the phon memory, i got the same message.
spytom said:
Hello, i'v tried your tip, but still can not flash. I installed CWM. I saw the failed massege and it says, somthing wrong with my sd card. In CWM i can not format, mount and partitioning. But the phone and my laptop see my sd card and no have probleme with it. Maybe my sd card large? It is 8 Gb. The message is: Error (7) sd card, but if i put recovery zip in the phon memory, i got the same message.
Click to expand...
Click to collapse
Try using All in one 880p pack, to install Recovery! it may help.
Javier_Vzla said:
Try using All in one 880p pack, to install Recovery! it may help.
Click to expand...
Click to collapse
Keep in mind that the included recoveries in that tool kit are outdated and therefore won't be able of flashing KitKat ROMs. If you plan on using it, you must download the latest recovery you want to use yourself and replace it in the tool's sources.
Sent from my LG-P880 using xda app-developers app
balloon27 said:
Keep in mind that the included recoveries in that tool kit are outdated and therefore won't be able of flashing KitKat ROMs. If you plan on using it, you must download the latest recovery you want to use yourself and replace it in the tool's sources.
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
+1
Or you can use the toolkit and then flash the cwm of laufersteppenwolf, easy way.
Thanks guys, i start to give up I have CWM 6.0.3.1. I tried to install CWM 6.0.4.5. zip, it sad is done, but when i restart the recovery i got the same cwm (6.0.3.1). I tried also with Rom manager, but the recovery disapeared, when i push the vol down and power off, it is stuck on the screen lg logo. So i don't know what can i do.
spytom said:
Thanks guys, i start to give up I have CWM 6.0.3.1. I tried to install CWM 6.0.4.5. zip, it sad is done, but when i restart the recovery i got the same cwm (6.0.3.1). I tried also with Rom manager, but the recovery disapeared, when i push the vol down and power off, it is stuck on the screen lg logo. So i don't know what can i do.
Click to expand...
Click to collapse
Have you tried the toolkit suggested above? I'll see if I can upload it with updated files for you!
Thanks guys u r very kind, i could flash the new CWM. Yes i have the toolkit. After the cwm flash i tried again vanir rom flashing, but i could not. I made a log file from the error. Please ckeck it, maybe somebody understand it, i am not. http://www.megafileupload.com/en/file/515636/recovery-1--log.html
spytom said:
Thanks guys u r very kind, i could flash the new CWM. Yes i have the toolkit. After the cwm flash i tried again vanir rom flashing, but i could not. I made a log file from the error. Please ckeck it, maybe somebody understand it, i am not. http://www.megafileupload.com/en/file/515636/recovery-1--log.html
Click to expand...
Click to collapse
The log says CWM can't open the ROM's .zip file. Might be a bad download.
Greetings from my Nexus 7 FHD!
Thanks the help to everybody, it was hard but i could flash vanir rom finally. :laugh:
CLOCKWORKMOD RECOVERY 6.0.1.2
Click to expand...
Click to collapse
This is the CWM recovery found on the latest CM9 sources.
INSTALLATION
Click to expand...
Click to collapse
Download the update.zip found here
Place it on your SD card
Flash it on your actual recovery (doesn't matter if it's stock one)
USAGE
Click to expand...
Click to collapse
Press home + volume up + home button to enter
Our sources can be found on BroadcomCM Github
reserved
Wow ..well done ..
Sent from my GT-S5830i using Tapatalk 2
Wondered.....nice work bro....:thumbup::beer:
Send from Tapatalk 2
When I tried to wipe cache with this version, my phone stopped detecting the cache partition :/ Doing it again with version 5 put it back to normal,, but yeah.
Sent from my HP Pavilion g6 Notebook PC using Tapatalk
Sorry for english.
Bug: If i unmount /system and i can mount this again. Error: Error mounting /system
This problem is and with /data and /cache..
With /sdcard work good.
Other problem is..i can mount /sd-ext ..i have ext3 partition.
I can try to make backup (for testing) because i can remount /data /system /cache..
Prob with "STATUS 7"
After Flashing with cwn 6.. Im still having the same Prob.. I want to download c11 on my Ace i ?
Any Suggestions!!:crying:
Cool vats said:
After Flashing with cwn 6.. Im still having the same Prob.. I want to download c11 on my Ace i ?
Any Suggestions!!:crying:
Click to expand...
Click to collapse
cn u xplane properly
i cnt getit..
if ur getting problem with cmw
then
Flash via odin
In PDA section
https://docs.google.com/file/d/0BzmTivDo1WcYTmp1N0hibG9UMTg/preview?pli=1
hit thnx if i help u
Sent from my GT-S5830i using Tapatalk 2
Here is the Solution!!
Cool vats said:
After Flashing with cwn 6.. Im still having the same Prob.. I want to download c11 on my Ace i ?
Any Suggestions!!:crying:
Click to expand...
Click to collapse
Flash via odin
In PDA section :good:Download it from attached files!!
https://docs.google.com/file/d/0BzmT.../preview?pli=1
NOTE!! Flash in PDA Section only!!
:victory:
Cool vats said:
Flash via odin
In PDA section :good:Download it from attached files!!
https://docs.google.com/file/d/0BzmT.../preview?pli=1
NOTE!! Flash in PDA Section only!!
:victory:
Click to expand...
Click to collapse
exactly what i said in previous post
:silly:
Hit thnks if i help you
Sent from my GT-S5830i using Tapatalk
dj88 said:
exactly what i said in previous post
:silly:
Hit thnks if i help you
Sent from my GT-S5830i using Tapatalk
Click to expand...
Click to collapse
I think he even copied your link LOL.
No, Bt i kw from whre you people get this..
Dont act smart!!
Sent from my GT-S5830i using Tapatalk 2
Cool vats said:
No, Bt i kw from whre you people get this..
Dont act smart!!
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
I didn't said that
just shared link..
Hitesh2626 said:
I think he even copied your link LOL.
Click to expand...
Click to collapse
lol
Installation problem
Hi everyone
A friend gave me a S5839i and I tried to install cwm a hundred times, and It was completely impossible. I access to the stock recovery, apply the update from sd card and after selecting the approppiate file cwm appears on screen, but when you access again to recovery, goes to stock one. ¿Anybody can help me?
Thanks in advance
miguelagarcia2 said:
Hi everyone
A friend gave me a S5839i and I tried to install cwm a hundred times, and It was completely impossible. I access to the stock recovery, apply the update from sd card and after selecting the approppiate file cwm appears on screen, but when you access again to recovery, goes to stock one. ¿Anybody can help me?
Thanks in advance
Click to expand...
Click to collapse
What kernel your use? On Raphael Kernel you cannot replace CWM without flash with odin (boot.img)
il3gal said:
What kernel your use? On Raphael Kernel you cannot replace CWM without flash with odin (boot.img)
Click to expand...
Click to collapse
It is stock, I'm triying to flash another rom
Enviado desde mi GT-I8190N mediante Tapatalk
Getting Status 0 error while installing cm-11 from your link with this CWM 6.0.1.2
I don't know but how i have the CWM 6.0.1.2 as default after trying lot of things and my phone directly boots to 6..0.1.2 instead of stock recovery.
Please help how to install CM-11. Even CM-10 will do but not sure how to get the working build with my above CWM.
kingsdeb said:
Getting Status 0 error while installing cm-11 from your link with this CWM 6.0.1.2
I don't know but how i have the CWM 6.0.1.2 as default after trying lot of things and my phone directly boots to 6..0.1.2 instead of stock recovery.
Please help how to install CM-11. Even CM-10 will do but not sure how to get the working build with my above CWM.
Click to expand...
Click to collapse
MTD build does not required a oldest recovery. Find CWM 6.0.5.3 at Discussion thread. Restore back to stock and flash again. Well, it should be work for now.
RevolutionBolt said:
MTD build does not required a oldest recovery. Find CWM 6.0.5.3 at Discussion thread. Restore back to stock and flash again. Well, it should be work for now.
Click to expand...
Click to collapse
How to restore back to stock recovery ? I have some 6.0.5.3 CWM as well but not working. A little more explanation will help.
kingsdeb said:
How to restore back to stock recovery ? I have some 6.0.5.3 CWM as well but not working. A little more explanation will help.
Click to expand...
Click to collapse
Well, to get to stock recovery, download XXLK1 firmware anywhere. And restore with Odin. Make sure you put files in right places. And install back CM11 with latest nightly with CWM 6.0.5.3. It should work for now. You'll be fine after install but don't forget install Galaxy Y MODEM after installed CM11. It's bug on our CM11 if you don't install, we can't boot without install it. If you know this already, just leave it.