Plese Help Htc one m7_ul basband imei unknown - One (M7) Q&A, Help & Troubleshooting

Hi i AM NE HERE PLEASE HELP ME OUT ABOUT MY HTC ONE M7 CID ORANG001
Bootloader Unlocked Tempered
m7_ul pvt ship s-on rh
hboot 1.44.0000
radio -4a.13.3231.27
opendsp-v26.120.274.0202
emmc-boot
may 5 2013,02:40:50:-1
condition were same when came to me
booting again and again from htc logo
i install recovery
recovery-clockwork-6.0.3.1-m7 via fast boot
then install cm-10.1-20130730-NIGHTLY-m7ul
and gapps via recovery
phone turn on properly but imei and Baseband unknown and after few minuts phone restart again
i getvar via fastboot
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.13.3231.27
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.28.61.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA35NW926022
(bootloader) imei: 35443xxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: ORANG001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3846mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many li
finished. total time: 0.051s
Also i try to install backup from recovery backup downloaded from http://forum.xda-developers.com/showthread.php?t=2207874
there u can see
M7 CWM Nandroid Backup / CID ORANG001 / 1.28.61.7 (Orange UK - Thanks to Azzabear)
but instalation abrot
when i try to s-off for chang cid via revone it gives error
Gaining root access (thanks to Dan's motochopper)...Segmentation fault
from google play store i install rootcheck it says device not rooted properly
superuser i install twice
please help me thanks in advance
Please help me

lasertec_06 said:
hi i am ne here please help me out about my htc one m7 cid orang001
bootloader unlocked tempered
m7_ul pvt ship s-on rh
hboot 1.44.0000
radio -4a.13.3231.27
opendsp-v26.120.274.0202
emmc-boot
may 5 2013,02:40:50:-1
condition were same when came to me
booting again and again from htc logo
i install recovery
recovery-clockwork-6.0.3.1-m7 via fast boot
then install cm-10.1-20130730-nightly-m7ul
and gapps via recovery
phone turn on properly but imei and baseband unknown and after few minuts phone restart again
i getvar via fastboot
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4a.13.3231.27
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.28.61.10
(bootloader) version-misc: Pvt ship s-on
(bootloader) serialno: Fa35nw926022
(bootloader) imei: 35443xxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: M7_ul
(bootloader) platform: Hboot-8064
(bootloader) modelid: Pn0710000
(bootloader) cidnum: Orang001
(bootloader) battery-status: Good
(bootloader) battery-voltage: 3846mv
(bootloader) partition-layout: Generic
(bootloader) security: On
(bootloader) build-mode: Ship
(bootloader) boot-mode: Fastboot
getvar:all failed (status read failed (too many li
finished. Total time: 0.051s
also i try to install backup from recovery backup downloaded from http://forum.xda-developers.com/showthread.php?t=2207874
there u can see
m7 cwm nandroid backup / cid orang001 / 1.28.61.7 (orange uk - thanks to azzabear)
but instalation abrot
when i try to s-off for chang cid via revone it gives error
gaining root access (thanks to dan's motochopper)...segmentation fault
from google play store i install rootcheck it says device not rooted properly
superuser i install twice
please help me thanks in advance
please help me
Click to expand...
Click to collapse
i got s-off and temperd removed via revone and changed cid 1111111
can you help me witch ruu i can use for imei basband unknown

lasertec_06 said:
i got s-off and temperd removed via revone and changed cid 1111111
can you help me witch ruu i can use for imei basband unknown
Click to expand...
Click to collapse
How do you get the S-off and tempered removed? Which version of renove?
Thanks.

lasertec_06 said:
Hi i AM NE HERE PLEASE HELP ME OUT ABOUT MY HTC ONE M7 CID ORANG001
Bootloader Unlocked Tempered
m7_ul pvt ship s-on rh
hboot 1.44.0000
radio -4a.13.3231.27
opendsp-v26.120.274.0202
emmc-boot
may 5 2013,02:40:50:-1
condition were same when came to me
booting again and again from htc logo
i install recovery
recovery-clockwork-6.0.3.1-m7 via fast boot
then install cm-10.1-20130730-NIGHTLY-m7ul
and gapps via recovery
phone turn on properly but imei and Baseband unknown and after few minuts phone restart again
i getvar via fastboot
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.13.3231.27
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.28.61.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA35NW926022
(bootloader) imei: 35443xxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: ORANG001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3846mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many li
finished. total time: 0.051s
Also i try to install backup from recovery backup downloaded from http://forum.xda-developers.com/showthread.php?t=2207874
there u can see
M7 CWM Nandroid Backup / CID ORANG001 / 1.28.61.7 (Orange UK - Thanks to Azzabear)
but instalation abrot
when i try to s-off for chang cid via revone it gives error
Gaining root access (thanks to Dan's motochopper)...Segmentation fault
from google play store i install rootcheck it says device not rooted properly
superuser i install twice
please help me thanks in advance
Please help me
Click to expand...
Click to collapse
Get S-OFF via Revone before you do anything else.
Nevermind, it seems you already did that, which is great. Follow my guide : HERE. Quote me if you come across any errors or weird stuff so I can see you answered.
marosas said:
How do you get the S-off and tempered removed? Which version of renove?
Thanks.
Click to expand...
Click to collapse
Revone is a way of getting S-OFF that is most likely the easiest one, but requires an older firmware. As soon as your HBOOT is 1.54 and up, you have to use Rumrunner which is a bit tougher to use.

attanasi0 said:
Get S-OFF via Revone before you do anything else.
Nevermind, it seems you already did that, which is great. Follow my guide : HERE. Quote me if you come across any errors or weird stuff so I can see you answered.
Revone is a way of getting S-OFF that is most likely the easiest one, but requires an older firmware. As soon as your HBOOT is 1.54 and up, you have to use Rumrunner which is a bit tougher to use.
Click to expand...
Click to collapse
I get s-off but my problem still same got s-off via Revone changed cid 111111111 flash with more than one Ruu still baseband imei unknown its kind of efs repair problem any way i gave back the HTC to customer Not happy ending

i have the same problem too, how I can fix that

App Móvil Habana said:
i have the same problem too, how I can fix that
Click to expand...
Click to collapse
Suggestion, if you flash a custom ROM, suggest boot into bootloader after install and "fastboot erase cache" before you reboot phone if it doesn't boot or after you have flashed a new recovery do the same.
This assists both

Related

Htc One M7 Stuck on logo s-on

Last Two Days ago I took from customer Htc one m7 logo hang htc condition.
Phone goes to Recovery Mode I make it Wipe But phone still same problem.it was 1.55 hboot.then i try flash phone with RUU but its give me error 155 During Flashing time.Then i make Ressurect it with riffbox after there hboot 1.44 also change CID I make it Super cid1111111.
But at this moments I cant flash this phone with RUU,ZIP.
I try also adb tool flashing. but same nothing happened to me.
I must sure it need to s-off but i cant make it s-off bcoz phone is still logo hang.
Plz anyone hale me.
Code:
ot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.00.000.00
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT358W9xxxx
(bootloader) imei: 354xxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4326mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.076s
facebook.com said:
Last Two Days ago I took from customer Htc one m7 logo hang htc condition.
Phone goes to Recovery Mode I make it Wipe But phone still same problem.it was 1.55 hboot.then i try flash phone with RUU but its give me error 155 During Flashing time.Then i make Ressurect it with riffbox after there hboot 1.44 also change CID I make it Super cid1111111.
But at this moments I cant flash this phone with RUU,ZIP.
I try also adb tool flashing. but same nothing happened to me.
I must sure it need to s-off but i cant make it s-off bcoz phone is still logo hang.
Plz anyone hale me.
Code:
ot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.00.000.00
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT358W9xxxx
(bootloader) imei: 354xxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4326mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.076s
Click to expand...
Click to collapse
1- next time just bump you own thread (after 24 hours) http://forum.xda-developers.com/showthread.php?t=2674672
no need to double-thread!!
2- the reason nobody answered, is probably because we have no clue what you are doing: riffbox, SuperCID, locked bootloader, S-On = all very confusing
3- no functioning ROM = no S-Off
4- you need to have an unlocked bootloader to be able to flash custom stuff
5- maybe try a RUU.EXE
nkk71 said:
1- next time just bump you own thread (after 24 hours) http://forum.xda-developers.com/showthread.php?t=2674672
no need to double-thread!!
2- the reason nobody answered, is probably because we have no clue what you are doing: riffbox, SuperCID, locked bootloader, S-On = all very confusing
3- no functioning ROM = no S-Off
4- you need to have an unlocked bootloader to be able to flash custom stuff
5- maybe try a RUU.EXE
Click to expand...
Click to collapse
I try to flash Bootloader Lock & unlock but It same no take flash phone.
I try also TWRP recovery flash but its give me error e:can't mount sdcard
facebook.com said:
I try to flash Bootloader Lock & unlock but It same no take flash phone.
I try also TWRP recovery flash but its give me error e:can't mount sdcard
Click to expand...
Click to collapse
1- with SuperCID, I don't think the unlock token will work (if that's what you meant)
2- how are you able to flash TWRP if you are locked?? i think you're referring to stock recovery, and that's not going to help
==> you need to UNLOCK the bootloader or try running a RUU.EXE, try this one: http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/

From ARHD 52 to stock

Hi everyone,
I need to reflash the latest stock ROM in my M7... I tried to download the latest RUU Europe but it says errore 158 wrong ROM.
Actually I have a HTC with REvolution HD 52.0
Hboot 1.44.0000
Rooted
Unlocked
can anyone help me finding the correct RUU and procedure?
Thanks
gerazzo said:
Hi everyone,
I need to reflash the latest stock ROM in my M7... I tried to download the latest RUU Europe but it says errore 158 wrong ROM.
Actually I have a HTC with REvolution HD 52.0
Hboot 1.44.0000
Rooted
Unlocked
can anyone help me finding the correct RUU and procedure?
Thanks
Click to expand...
Click to collapse
getvar pls
EDIT:nevermind, just look for your version in here http://www.htc1guru.com/downloads/ruu-zip-downloads/
the steps in going back to 100% stock is in here http://forum.xda-developers.com/showthread.php?t=2358738
credits to @crushalot for making this steps
grins814 said:
getvar pls
EDIT:nevermind, just look for your version in here http://www.htc1guru.com/downloads/ruu-zip-downloads/
the steps in going back to 100% stock is in here http://forum.xda-developers.com/showthread.php?t=2358738
credits to @crushalot for making this steps
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.20.3263.30
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxxxxxx
(bootloader) imei xxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__203
(bootloader) battery-status: good
(bootloader) battery-voltage: 3836mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.060s
how come you dont have version-main? try this one http://www.htc1guru.com/dld/guru_reset_m7_3-62-401-1-zip/ make sure the MD5 in this site matches the one you downloaded
gerazzo said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_ul
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__203
finished. total time: 0.060s
Click to expand...
Click to collapse
Why do you need to go back to stock? Warranty/selling?
because with S-On you can only get your bootloader to say RELOCKED, it will never say LOCKED unless you S-Off.
nkk71 said:
Why do you need to go back to stock? Warranty/selling?
because with S-On you can only get your bootloader to say RELOCKED, it will never say LOCKED unless you S-Off.
Click to expand...
Click to collapse
just beacause i want the stock one with ota updates
gerazzo said:
just beacause i want the stock one with ota updates
Click to expand...
Click to collapse
Two more questions
1- do you care about bootloader saying RELOCKED instead of LOCKED?
2- do you ever need to S-Off you device?
nkk71 said:
Two more questions
1- do you care about bootloader saying RELOCKED instead of LOCKED?
2- do you ever need to S-Off you device?
Click to expand...
Click to collapse
All i know is that i need root....
so i think i have to be at least unlocked to also installa modded recovery.
Am i wrong?
nothing....
i tried: RUU_M7_UL_K44_SENSE55_MR_HTC_Europe_4.19.401.9_R_Radio_4A.23.3263.28_10.38r.1157.04L_release_353069_signed_2-1
but it says that i have to choose the correct utility....
Can someone help me?
Thanks in advnce

[Q] RUU Help

(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.20.3263.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.12
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4096mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.065s
Here's the deal, the phone is S-OFF, rooted.
When trying to RUU the phone using:
RUU_M7_UL_K44_SENSE55_MR_Rogers_WWE_4.19.631.9_Radio_4A.23.3263.28_10.38r.1157.04L_release_351317_signed_2.exe
It always get stuck @ Step 1/5 Checking Headers.......
Any ideas?
-Phone is already S-OFF,
-was on hboot 1.55, I've downgraded it to 1.44 now and it's still doing the same thing
-original cid is ROGER001, tried with original cid and it gets stuck at the same point
-Checked md5 of the .exe and it checks out fine.
-Tried it on multiple computers, same issue
-Tried it on another computer, another RUU.exe file that was known to be working well with my friend's m7, still stuck on
-GOAL was to return to stock with S-OFF and get the Sense 6 updates.
-First tried with unlocked bootloader, now with relock bootloader, same thing
-Tried with customer Recovery, now with stock recovery, same thing
-Also won't take OTA updates @ Stock ROM and stock Recovery
Here's the detail version of what my phone has been through if it helps
1) Originally a ROGERs m7, rooted, S-OFF
2) supercid and RUU-ed to a GPE Edition
3) realized that there was no ROGER RUU at that point and didn't like the GPE Edition
4) Tries to restore back from nandroid but lost touch, end up RUU-ed back to a Telus ROM until now
Any ideas?

Newbie Trying to Unroot but now stuck on bootloader

HI there,
I know nothing about this stuff but i got a rooted phone. I followed the instruction on a YouTube video (never again) but for some reason the RUU gets stuck at 5%. Now I cant go back and its stuck on bootloader. What should i do?
When i go on recover or factory reset the bootloader just comes back up
I tried the uk 02 RUU
The phone is htc one M7
Any help would be greatly appreciated!!
I have tried searching for this problem but the solution i can find needs access to the phone.
***Tampered***
***Relocked***
***security warning***
m7_ul PVT SHIP S-on RH
HBOOT-1.57.0000
Radio-4t.28.3218.04
OpenDSP-v32.120.274.0909
os-
emmc-boot 2048MB
I have attached pictures about errors on RUU
I'm not familiar with the Window GUI tools but it is possible that your RUU is not compatible with your HBOOT version. Try using an old RUU, possibly a JB (4.2) version.
What's the RUU version you are trying to use anyway?
nukedz said:
I'm not familiar with the Window GUI tools but it is possible that your RUU is not compatible with your HBOOT version. Try using an old RUU, possibly a JB (4.2) version.
What's the RUU version you are trying to use anyway?
Click to expand...
Click to collapse
His phone is S-ON so he can't use a 4.2 ruu (its a downgrade). He must flash same or higher version ruu as his current firmware. We can't know his firmware version because twrp wiped the os version form the bootloader (blank os-).
If he remember what the firmware version was then he could flash a ruu of the same or higher version (if any) or he could restore same version nandroid backup. I know there is a lollipop RUU for O2 in the general section but not sure if it can be flashed on s-on phone cause it doesn't seem to be an official RUU (combined).
Otherwise he can flash custom roms or even flash custom rom, achieve s-off and then he can use any RUU he wants.
thuvcasio said:
HI there,
I know nothing about this stuff but i got a rooted phone. I followed the instruction on a YouTube video (never again) but for some reason the
RUU gets stuck at 5%. Now I cant go back and its stuck on bootloader. What should i do?
When i go on recover or factory reset the bootloader just comes back up
I tried the uk 02 RUU
The phone is htc one M7
Any help would be greatly appreciated!!
I have tried searching for this problem but the solution i can find needs access to the phone.
***Tampered***
***Relocked***
***security warning***
m7_ul PVT SHIP S-on RH
HBOOT-1.57.0000
Radio-4t.28.3218.04
OpenDSP-v32.120.274.0909
os-
emmc-boot 2048MB
I have attached pictures about errors on RUU
Click to expand...
Click to collapse
post fastboot getvar all
so we can suggest possible RUU
remove imei and serial from getvar
yatindroid said:
post fastboot getvar all
so we can suggest possible RUU
remove imei and serial from getvar
Click to expand...
Click to collapse
sorry for the extremly late reply gave up on it but now need to fix this.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.28.3218.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4278mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.125s
C:\Program Files (x86)\Minimal ADB and Fastboot>
I have tried for hours to get this information such noob shouldn't have messed with this in the first place
thuvcasio said:
sorry for the extremly late reply gave up on it but now need to fix this.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.28.3218.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4278mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.125s
C:\Program Files (x86)\Minimal ADB and Fastboot>
I have tried for hours to get this information such noob shouldn't have messed with this in the first place
Click to expand...
Click to collapse
Flash the 7.18.206.2 ruu from here
http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944
Read the flashing instructions first, use htc_fastboot to flash, when flashing the phone will reboot part way through and continue. Leave it alone 10-15 minutes and be sure it says finished.
mb_guy said:
Flash the 7.18.206.2 ruu from here
http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944
Read the flashing instructions first, use htc_fastboot to flash, when flashing the phone will reboot part way through and continue. Leave it alone 10-15 minutes and be sure it says finished.
Click to expand...
Click to collapse
it has taken me 2 days and couple of flashes and got it working again, thanks a bunch for pointing me in the right direction buddy!:good:

software troubles after changing my LCD/digitizer on my m7

After changing the touch screen on my m7, the os (cm-12-20150117-UNOFFICIAL-m7.zip) stopped booting (black screen) and I was not able to access twpr anymore.
After flashing many twrp that never were able to pass 'entering recovery' screen, I found the only twrp that booted after flashing wich is twrp-2.6.3.3-m7.img. Anything above this version never worked; I'm still wondering why.
I am able to adb sideload from twrp on my osx (sierra) but after rebooting, the screen is stuck on the HTC logo.
When I hold Power + down Volume, I get these infos :
*** TAMPERED ***
*** UNLOCKED ***
M7_UL PVT SHIP S-ON RH
HBOOT-1.44 0000
RADIO-4A.14.3250.13
OpenDSP-v26. 120.274.0202
eMMC-boot
May 4 2013, 14:48:26:-1
I tried switching to S-OFF by doing : adb push ~/Download/revone /data/local/tmp/ , but I get "adb: error: connect failed: closed".
Same goes when doing adb shell.
My only goal right now, is to be able to boot an OS with the Play store.
Let me know if I can provide any other information.
Any help is very welcome.
I suggest you first get back to stock with ruu(search for old version with 1.44 hboot if you want S-OFF)
lucyr03 said:
I suggest you first get back to stock with ruu(search for old version with 1.44 hboot if you want S-OFF)
Click to expand...
Click to collapse
I tried going back to stock, but according to what I read, I need to S-OFF first before being able to back to stock.
I downloaded revone and tried to adb push it to my device in twrp (2.6.3.3), i keep getting :
adb push revone-0.2.1 /date/local/tmp
adb: error: connect failed: closed
same error goes to adb shell.
I might need a hand as I'm stuck. I might be missing something behind my nose.
wmehanna said:
I tried going back to stock, but according to what I read, I need to S-OFF first before being able to back to stock.
Click to expand...
Click to collapse
False, you don't need S-OFF (unless you want to downgrade or use a RUU version no meant for your phone)
post your "fastboot getvar all"
alray said:
False, you don't need S-OFF (unless you want to downgrade or use a RUU version no meant for your phone)
post your "fastboot getvar all"
Click to expand...
Click to collapse
< waiting for any device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.661.17
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT349W901468
(bootloader) imei: 354439054792090
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: TELUS001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4310mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
ERROR: usb_read failed with status e00002e8
getvar:all FAILED (status read failed (Invalid argument))
finished. total time: 0.041s
wmehanna said:
< waiting for any device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.661.17
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT349W901468
(bootloader) imei: 354439054792090
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: TELUS001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4310mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
ERROR: usb_read failed with status e00002e8
getvar:all FAILED (status read failed (Invalid argument))
finished. total time: 0.041s
Click to expand...
Click to collapse
You could restore the 1.29.661.5 nandroid and then take all ota updates, or update your firmware and flash the 4.19.661.8 ruu or 7.17.661.7 ruu. Note that flashing these RUU will update your hboot and make it harder to s-off. For example 7.17.661.7 is hboot 1.61 and only sunshine will s-off this version.

Categories

Resources