Disclaimer: I take no responsibility for bad things that may occur as a result of flashing this.
NOTE: If coming from 10.1, make a back up first as you will not be able to flash back to 10.1 unless you factory reset
These are Official CM 10.2 builds for the Galaxy Note 8.0 N5110
Prereq: Unlocked Bootloader
It is recommended to flashed this in CWM .
Source: http://github.com/CyanogenMod
Instructions:
-Download and copy rom to sdcard
-Download and copy gapps to sdcard (make sure they are for 4.3!)
-Reboot into recovery (CWM)
-Flash rom
-Flash gapps
-Wipe data/cache
-Reboot
Known Bugs:
-BT voice search
ROM: http://download.cyanogenmod.org/?device=n5110
****** All links below this are UNOFFICIAL builds ******************
[8/1]ROM: http://www.androidfilehost.com/?fid=23060877489997662
Changes:
- Initial Release
[8/27] ROM: http://www.androidfilehost.com/?fid=23060877490002894
Changes:
- Upstream CM changes
[9/12] ROM: http://www.androidfilehost.com/?fid=23134718111252562
Changes:
- Fixed graphical glitches / black screens
- Upstream CM changes
[9/20] ROM: http://www.androidfilehost.com/?fid=23134718111254117
Changes:
- changed to tvdpi (fixes icon blur)
- Upstream CM Changes (including netflix fix!)
[10/08] ROM: http://www.androidfilehost.com/?fid=23159073880934700
Changes:
- Boost speaker volume slightly
- Add opensource camera (fixes front cam freezing)
- Upstream CM Changes
[10/10] ROM: http://www.androidfilehost.com/?fid=23159073880935566
Changes:
- Updated to 4.3.1
- Add IRDA service/support (needs testing)
- Opensource Sensors (fixes incorrect light_sensor reading really high instead of 0 or -1)
- Correctly read Wifi mac address
- Charging tweaks (need charging speed tested)
[10/14] ROM: http://www.androidfilehost.com/?fid=23159073880936401
Changes:
- Upstream CM Changes
- Fix Haptic feedback for back/menu keys
- Fix screen staying on while tablet is off and charging
[10/23] ROM: http://www.androidfilehost.com/?fid=23189362627840660
Changes:
- Upstream CM Changes
- Fix magnetic cover support (turn on/off screen)
- Fix Bluetooth (99% sure this is good, can anyone else confirm?)
- Fix wifi mac address again (should be good for sure now)
please make for N5100 :crying:
thanks for this, Scott!
Can we use the 0301 Gapps?
Must use 4.3 gapps. Google them, they're out there.
thats what I thought..I have the PA gaaps. which are 4.3, so I will try them
thanks
EDIT: found the non pa gapps, so gonna use them..thanks again!
Thanks for the build.
One question: Is the source in your 10.2 branch current? I see last update 9 days ago and I'd like to fork it for my own try.
Gesendet von meinem GT-N5100 mit Tapatalk 4
Anyone having any luck with this rom? I downloaded it twice, clean install, etc... Everything force closes for me. Can't even type because the keyboard FC, the back button won't work, the top bar is all out of whack.
works perfectly for me..make sure you use 4.3 gaaps, and fully factory wipe before flashing
wase4711 said:
works perfectly for me..make sure you use 4.3 gaaps, and fully factory wipe before flashing
Click to expand...
Click to collapse
Yup, full wipe and PA 4.3 gaaps. Maybe I'll give it another go in a bit. I've got a good set up going as is, so even if I can't get it working it's not a huge deal.
dont use PA gapps, use plain 4.3 gaaps..
get them here
http://d-h.st/6Oz
wase4711 said:
dont use PA gapps, use plain 4.3 gaaps..
get them here
http://d-h.st/6Oz
Click to expand...
Click to collapse
Tried with no gapps and had no luck. Maybe just a bad download, although I did d/l twice.
edit - downloaded the rom one more time and installed the PA 4.3 gapps and all is well. Third time was the charm.
sbrissen said:
Disclaimer: I take no responsibility for bad things that may occur as a result of flashing this.
NOTE: If coming from 10.1, make a back up first as you will not be able to flash back to 10.1 unless you factory reset
These are Unofficial CM 10.2 builds for the Galaxy Note 8.0 N5110
Prereq: Unlocked Bootloader
It is recommended to flashed this in CWM .
Source: http://github.com/sbrissen
Instructions:
-Download and copy rom to sdcard
-Download and copy gapps to sdcard (make sure they are for 4.3!)
-Reboot into recovery (CWM)
-Flash rom
-Flash gapps
-Wipe data/cache
-Reboot
Does this ROM really work? Tried downloading twice and from different mirrors but always get error during installation and it 'Aborts ...'.
I would have loved to give it a try though.
Click to expand...
Click to collapse
how long does it take / how difficult is it to compile these Roms? would love to help out development if I could figure out how to do it.
ddye said:
sbrissen said:
Disclaimer: I take no responsibility for bad things that may occur as a result of flashing this.
NOTE: If coming from 10.1, make a back up first as you will not be able to flash back to 10.1 unless you factory reset
These are Unofficial CM 10.2 builds for the Galaxy Note 8.0 N5110
Prereq: Unlocked Bootloader
It is recommended to flashed this in CWM .
Source: http://github.com/sbrissen
Instructions:
-Download and copy rom to sdcard
-Download and copy gapps to sdcard (make sure they are for 4.3!)
-Reboot into recovery (CWM)
-Flash rom
-Flash gapps
-Wipe data/cache
-Reboot
Does this ROM really work? Tried downloading twice and from different mirrors but always get error during installation and it 'Aborts ...'.
I would have loved to give it a try though.
Click to expand...
Click to collapse
its been on my tablet since 8-1, working fine with no problems
are you rooted? what recovery are you using?
Click to expand...
Click to collapse
Please make it for N5120. :fingers-crossed:
wase4711 said:
ddye said:
its been on my tablet since 8-1, working fine with no problems
are you rooted? what recovery are you using?
Click to expand...
Click to collapse
I have CWM and rooted. I once tried the 4.2.2 leak and went very well but reverted back to stock for stability and usability.
What is your overall assessment of CM 10.2 on our tablet (5110)?
Many thanks
EDIT: The OP says 'Unlocked Bootloader', is that so?
Click to expand...
Click to collapse
wase4711 said:
ddye said:
its been on my tablet since 8-1, working fine with no problems
are you rooted? what recovery are you using?
Click to expand...
Click to collapse
No graphical glitches or black screens?
Click to expand...
Click to collapse
hermeticist said:
wase4711 said:
No graphical glitches or black screens?
Click to expand...
Click to collapse
havent noticed any yet
---------- Post added at 08:41 AM ---------- Previous post was at 08:40 AM ----------
ddye said:
wase4711 said:
I have CWM and rooted. I once tried the 4.2.2 leak and went very well but reverted back to stock for stability and usability.
What is your overall assessment of CM 10.2 on our tablet (5110)?
Many thanks
EDIT: The OP says 'Unlocked Bootloader', is that so?
Click to expand...
Click to collapse
as long as you are rooted, you can install with no problems
Click to expand...
Click to collapse
Click to expand...
Click to collapse
I installed 10.2 and 4.3 gapps and all seemed find until I ran titanium backup.
It couldn't get root access
try installing busybox, then reboot
Related
Disclaimer: I take no responsibility for bad things that may occur as a result of flashing this.
NOTE: JB 4.2 will move anything in /sdcard to /sdcard/0 on first boot. If you revert back to JB 4.1 you will have to manually move things back
These are Unofficial CM 10.1 builds for the Galaxy Note 8.0 GT-N5110
It is recommended to flashed this in CWM .
Instructions:
-Download and copy rom to sdcard
-Download and copy gapps to sdcard (http://goo.im/gapps)
-Reboot into recovery (CWM)
-Flash rom
-Flash gapps
-Wipe data/cache
-Reboot
All source is on my github: http://www.github.com/sbrissen
Known Bugs:
- Screen Off Animation
- Bluetooth is flaky
-????
[Alpha 1]ROM: http://www.androidfilehost.com/?fid=23050663588004028
Changes:
- Initial Release
[Alpha 1.1]ROM: http://www.androidfilehost.com/?fid=23050663588004170
Changes:
- Fix youtube / streaming video
- Fix light sensor (Autobrightness should work now)
NOTE: moving to dated builds instead of Alpha...
[7/23/13]ROM: http://www.androidfilehost.com/?fid=23060877489995975
Changes:
- Fix sensors causing reboot (thanks Maui)
- disable touchkey timeout (kernel driver doesn't support this, possibly in future?)
- Fix CABC (content adaptive backlight control) in Advanced Settings
Wow i'm happy to see the first aosp on 5110....nice work
Inviato dal mio GT-N7100 con Tapatalk 4
sbrissen said:
Disclaimer: I take no responsibility for bad things that may occur as a result of flashing this.
NOTE: JB 4.2 will move anything in /sdcard to /sdcard/0 on first boot. If you revert back to JB 4.1 you will have to manually move things back
These are Unofficial CM 10.1 builds for the Galaxy Note 8.0 GT-N5110
It is recommended to flashed this in CWM .
Instructions:
-Download and copy rom to sdcard
-Download and copy gapps to sdcard (http://goo.im/gapps)
-Reboot into recovery (CWM)
-Flash rom
-Flash gapps
-Wipe data/cache
-Reboot
Known Bugs:
-GPS??
-Light/Prox Sensors are not working (DISABLE AUTO-BRIGHTNESS!)
-????
[Alpha 1]ROM: http://www.androidfilehost.com/?fid=23050663588004028
Changes:
- Initial Release
Click to expand...
Click to collapse
like clock work :laugh:
nice one bro, like i said earlier I'm on it in a bit, when i get to the house!: :thumbup:
Oh wow, just made my day!!!!
Sent from my GT-N5110 using Tapatalk 2
Only 156 mb for the rom? Wow.
Sent from my GT-N5110 using Tapatalk HD
Please N5100
No apps to SD?
Sent from my GT-N5110 using Tapatalk HD
launched on N5100!its work,but it does not ring!what modules are due to be overthrown from N5100
godraxe said:
launched on N5100!its work,but it does not ring!what modules are due to be overthrown from N5100
Click to expand...
Click to collapse
That's because the 5110 which this rom is for has no phone modem; only WiFi.
---------- Post added at 07:03 AM ---------- Previous post was at 07:01 AM ----------
hermeticist said:
That's because the 5110 which this rom is for has no phone modem; only WiFi.
Click to expand...
Click to collapse
Good to see the Legendary Sbrissen working his magic on the Note 8.
First here as he was first for the Sprint Epic 4G Touch!
hermeticist said:
That's because the 5110 which this rom is for has no phone modem; only WiFi.
---------- Post added at 07:03 AM ---------- Previous post was at 07:01 AM ----------
Good to see the Legendary Sbrissen working his magic on the Note 8.
First here as he was first for the Sprint Epic 4G Touch!
Click to expand...
Click to collapse
I understand why I'm asking, why do you need to pull out of its firmware N5100 to earn a N5100
nice Scott; great to see you on this device! :good:
I've been contacted by someone with a 5100 and we are working to get that going.
I've fixed the streaming video issue, trying to fix up the prox/light sensors before dropping another build.
Stay tuned to Alpha 1.1 today
I believe the apps2sd requires an app from the market?? I don't use it so I'm not entirely sure. Any other bugs???
Do we have to wipe system to install on Touchwiz?
hermeticist said:
Do we have to wipe system to install on Touchwiz?
Click to expand...
Click to collapse
no, just wipe data
sbrissen said:
I've been contacted by someone with a 5100 and we are working to get that going.
I've fixed the streaming video issue, trying to fix up the prox/light sensors before dropping another build.
Stay tuned to Alpha 1.1 today
I believe the apps2sd requires an app from the market?? I don't use it so I'm not entirely sure. Any other bugs???
Click to expand...
Click to collapse
tnx great man!wait for N5100 :good:
sbrissen said:
I've been contacted by someone with a 5100 and we are working to get that going.
I've fixed the streaming video issue, trying to fix up the prox/light sensors before dropping another build.
Stay tuned to Alpha 1.1 today
I believe the apps2sd requires an app from the market?? I don't use it so I'm not entirely sure. Any other bugs???
Click to expand...
Click to collapse
Apps2sd is in the the new build some how. It never worked, app or no app, originally.
Your build is fast though, no doubt.
Sent from my GT-N5110 using Tapatalk HD
@sbrissen I have the 5100 if you need any testing. Yes I know how to logcat/kmsg/dmesg
I am also on freenode regularly burgd is my handle if need be.
Will it come to N5120 LTE version?
Seems it is not very popular version in Note 8.0 family.
morgand536 said:
Will it come to N5120 LTE version?
Seems it is not very popular version in Note 8.0 family.
Click to expand...
Click to collapse
This can be used as a base and with (for the most part) a few changes it shouldn't be too hard.
sbrissen said:
This can be used as a base and with (for the most part) a few changes it shouldn't be too hard.
Click to expand...
Click to collapse
for N5100 will surely?be very much want :crying:!I tested if you need!Russian forum waiting for your work!CM 10.1 from N5100 please
Unofficial crespo build of Omni-ROM using CM11 kernel. Flash at your own risk. Use latest CWM to flash. Don't know if it works with TWRP.
For additional information see post 2
Changelog 22.08.2014
- latest Omni sources (as of 21.08.2014)
- This is a 'blind' build. I couldn't test it out. So DO A BACKUP before flashing this build.
Changelog 23.07.2014
- latest Omni sources (as of 22.07.2014)
- adapted and added 'OmniTorch' to work on crespo
Changelog 25.06.2014
- latest Omni sources (as of 24.06.2014)
- Android 4.4.4
- ZRAM defaults to 96 MB
Changelog 13.06.2014
- latest Omni sources (as of 13.06.2014)
- Android 4.4.3
- removed all custom properties (original Omni code)
Notes on this release:
Due to the fact that Android has iterated to Version 4.4.3, i recommend to do a fresh installation. Use Gapps from here: http://forum.xda-developers.com/showthread.php?t=2397942 I personally used 'MICRO MODULAR PACKAGE' 4.4.3.
Changelog 30.04.2014
- latest Omni sources (as of 30.04.2014)
Changelog 31.03.2014
- latest Omni sources (as of 31.03.2014)
Changelog 17.03.2014
- latest Omni sources (as of 17.03.2014)
Changelog 28.02.2014
- latest Omni sources (as of 28.02.2014)
- new Bootanimation should work now
- This is a 'blind' build. I couldn't test it out. So DO A BACKUP before flashing this build.
Changelog 21.02.2014
- latest Omni sources (as of 21.02.2014)
- temporarily changed to old bootanimation
- once again back to self compiled kernel
- removed property 'ro.config.max_cached_apps'
Changelog 05.02.2014
- latest Omni sources (as of 05.02.2014)
- fixed camera
- fixed zram handling
Changelog 03.02.2014
- latest Omni sources (as of 03.02.2014)
- system and kernel seperated again
- fixed ART runtime
Changelog 24.01.2014
- latest Omni sources (as of 24.01.2014)
- system and kernel build from sources again.
Changelog 10.01.2014
- latest Omni sources
- seperated system and kernel building. Using latest CM11 kernel as 'default' now
- cache is back again on /cache
- internal apps2sd fixed
- fixed graphical glitches and 'sudden reboots'
- removed property 'ro.config.force_highgfx' (see 'High Mem settings' in post 2)
- added properties 'ro.config.max_recent_tasks' and 'ro.config.max_starting_bg' (see 'High Mem settings' in post 2)
- changed default wallpaper
Changelog 27.12.2013
- fixed kernel flashing error
- latest Omni sources
- fixed SIM-pin and security keypad layout
- enabled KSM like described here: http://source.android.com/devices/low-ram.html#ksm
- enabled memory cgroups in kernel for zram like described here: http://source.android.com/devices/low-ram.html#zram
- added possibility to enable zram (see post 2 for instructions)
- temporary linked /cache to /data/cache (due to kernel problems not mounting cache partition)
- reset build.prop props so that phone behaves as a 'low memory' device
Known issues:
- Performance/VM-Settings are reset to default values after reboot.
Standard Installation:
- Download ROM and GAPPS
- Boot into recovery
- Do a backup
- if not already done, do a backup..
- Wipe Data/Factory Reset
- Mounts and Storage -> format /system
- Flash ROM
- Flash GAPPS
- Reboot
ART runtime Installation:
- Download ROM and GAPPS
- Boot into recovery
- Do a backup
- if not already done, do a backup..
- Wipe Data/Factory Reset
- Mounts and Storage -> format /system
- Flash ROM
- Reboot and 'Setup'
- Enable developer settings in the usual way by quickly tapping on 'Build Number' several times in 'About Phone'.
- Enable ART in developer settings and let it reboot.
- Wait... It will take some time. After round about 5 minutes Omni logo should dissappear and you should see 'Optimizing ...'
- After ROM has booted, reboot to recovery
- Flash GAPPS
- Reboot
For root, flash SuperSu, which can be found here at XDA.
build 7 DOWNLOAD: HERE
build 8 DOWNLOAD: HERE
build 9 DOWNLOAD: HERE
build 10 DOWNLOAD: HERE
build 11 DOWNLOAD: HERE
build 12 DOWNLOAD: HERE
build 13 DOWNLOAD: HERE
build 14 DOWNLOAD: HERE
build 15 (final) DOWNLOAD: HERE
For GAPPS package for 4.4.2 builds search XDA or use this minimal GAPPS (from Mokee ROM): http://www.androidfilehost.com/?fid=23329332407566631
For 4.4.3 builds use a package from here: http://forum.xda-developers.com/showthread.php?t=2397942
For 4.4.4 builds use Gapps from here: http://forum.xda-developers.com/showthread.php?t=2397942 I personally used 'MICRO MODULAR PACKAGE' 4.4.3.
And now for some rules:
- I won't implement special wishes. So don't ask for it. I will simply ignore such requests.
- I'll try to update every 2 weeks, except there are significant changes or fixes from Omni team. But read again: 'i'll TRY..'.
- And please don't flood my PM box. If you have problems installing/running, search XDA first...
A big and warm 'Thank you' and Credits go to 'DerTeufel1980' for creating his kernel and allowing me to use it.
Enjoy, lagloose
Additional installation instructions
Naturally a clean install is always the best thing to do, but a 'dirty' flash shoud be ok, as long as you didn't install scripts or anything else which reside on /system partition. However, flashing a new release overwrites Gapps. So what you can try is:
!!! In every case make sure you are on 'dalvik' runtime before trying a dirty flash !!!
Without wiping anything:
- flash new release
- flash Gapps
- flash 'SuperSu'
- reboot
ROM should boot now and show you the usual 'updating' and 'optimizing' app's (blah.. blah...) dialog. Afterwards try if everything is like 'before'. Of course i'll can't guarantee
ZRAM
To enable zram i've integrated an 'init.d' script which looks for special properties in build.prop and enables or disables zram depending on the values of this properties. These properties are 'sys.zram.size' (in Mb) and 'sys.zram.swappiness'. If 'sys.zram.size' ist set to '0', zram will be disabled. For those who want to enable it, i'd recommend to reserve 64Mb of memory for zram. So set 'sys.zram.size=64' in build.prop. I'd recommend ro leave swappiness at 20 because this seems to be a good 'balanced' value, but if you want to try around with swappiness, feel free.
People who are not familiar with 'adb' and setting properties can download 'build.prop editor' here: https://play.google.com/store/apps/details?id=com.jrummy.apps.build.prop.editor from playstore. BUT DON'T CHANGE ANY OTHER VALUE THAN MENTIONED ABOVE, UNLESS YOU KNOW WHAT YOU ARE DOING !!! To check if and 'how' zram works you can use this one from playstore: https://play.google.com/store/apps/details?id=id.co.ptskp.android.zs (Note: there seems to be a bug in that app which fc's and gives you back a large negative number. Just wait some time and start the app again. It should work than.)
High Mem settings
Due to too much problems with using 'ro.config.force_highgfx=true' in conjunction with low_mem device setting i decided to remove this property. Instead i've added and used three other properties to get our Nexus S running in 'high mem' mode without loosing too much performance. To change to high mem mode i recommend to set/change the follwing properties in system/build.prop:
ro.config.low_ram=false
ro.config.max_recent_tasks=10
ro.config.max_starting_bg=2
This can be done by using 'adb' or 'build.prop editor' from Playstore. See notes on 'build.prop editor' in ZRAM section of this post. Additionally you should consider downloading and flashing 'Devil Kernel' from here: http://forum.xda-developers.com/attachment.php?attachmentid=2314244&d=1381362960
For people who know about OOM settings, I suggest to set OOM values to 2048,3584,14080,17920,21760,25600. I won't do bigger explanations here on what all this does. Those of you, who are able to read source code are free to inspect Android source to find out...
Anyway, I'd be glad if someone does a post in this thread what OOM settings are and how they can be set.
Battery life
to increase battery life, you don't have to turn off Location services completely. However, i strongly recommend to turn off Location reporting and Location history in 'Google location settings'. Also turn off 'Scanning always available' in Advanced Wi-Fi settings.
Nice to see new kitkat rom's on our old crespo
Mmmm.. That new ROM smell..
Sent from my Nexus S using XDA Premium 4 mobile app
This is the Rom that I'm waiting for try ...
Thx
There is problem with root
kkkhattak said:
There is problem with root
Click to expand...
Click to collapse
Maybe you haven´t flashed supersu after installing the ROM...??
Root works very fine here...:good:
greet´s
lagloose said:
For root, flash SuperSu, which can be found here at XDA.
Click to expand...
Click to collapse
kkkhattak said:
There is problem with root
Click to expand...
Click to collapse
Maybe flash SuperSu??...
Which gapps did you guys use ?
Sooo Setting.Out, how is Omni petrforming compared to CM11?
k-kuchen said:
Sooo Setting.Out, how is Omni petrforming compared to CM11?
Click to expand...
Click to collapse
I'll have an update soon... Check my thread..
Sent from my Nexus S using XDA Premium 4 mobile app
This is possible the best kitkat ROM unofficial?
Enviado do meu Nexus S using Tapatalk 4 @ JellyShot
Okay, I need to know what I am doing wrong.. I have downloaded this rom 4 times with both my computer and phone.. I have tried CWM 6.0.4.3, Philz 6.01.0 (cwm6.0.4.5), TWRP 2.6.3... I did full wipes each time, no error messages on flashing with CWM's, failed message on TWRP.. and when I try to boot, I am knocked to boot loader every time.. I just reflashed EuroSkank CM11 with no issues.. So, what didn't I do?..
( for anyone new, I have flashed a few thousand times and know how to do it..)
Setting.Out said:
Okay, I need to know what I am doing wrong.. I have downloaded this rom 4 times with both my computer and phone.. I have tried CWM 6.0.4.3, Philz 6.01.0 (cwm6.0.4.5), TWRP 2.6.3... I did full wipes each time, no error messages on flashing with CWM's, failed message on TWRP.. and when I try to boot, I am knocked to boot loader every time.. I just reflashed EuroSkank CM11 with no issues.. So, what didn't I do?..
( for anyone new, I have flashed a few thousand times and know how to do it..)
Click to expand...
Click to collapse
http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-6.0.4.3-crespo.img
Flash the latest touch recovery in fastboot prior to flashing. It should flash after that.
Edit: Whether or not it boots is a another story. Mine's been sitting on the boot screen for 10 minutes.
Could I get a mirror please from someone who got it to boot??
Sent from my Nexus S using XDA Premium 4 mobile app
Setting.Out said:
Okay, I need to know what I am doing wrong.. I have downloaded this rom 4 times with both my computer and phone.. I have tried CWM 6.0.4.3, Philz 6.01.0 (cwm6.0.4.5), TWRP 2.6.3... I did full wipes each time, no error messages on flashing with CWM's, failed message on TWRP.. and when I try to boot, I am knocked to boot loader every time.. I just reflashed EuroSkank CM11 with no issues.. So, what didn't I do?..
( for anyone new, I have flashed a few thousand times and know how to do it..)
Click to expand...
Click to collapse
Same with me,
Always back to bootloader
Has anyone got this to boot yet?
treesurf said:
Has anyone got this to boot yet?
Click to expand...
Click to collapse
Nope. It stayed at boot logo for over 30 mins before I turned it off.
Sent from my Nexus S using Tapatalk
I have booted it and its an awesome rom
kkkhattak said:
I have booted it and its an awesome rom
Click to expand...
Click to collapse
So how did you install it? dirty/clean? what recovery?.. and can you make a mirror for your zip file?.. I can't download a ?good? copy...
Earlier, I have been compiling several ROMs for the galaxy tab (P7510/p4wifi) based on KitKat 4.4. I now decided to move over to OMNI ROM as base: http://omnirom.org/
The nice thing of OMNI in my personal opinion is smoothness: it is relatively low in features, but at the same time it is not that resource hungry as some other ROMs. The end result is a smooth ROM.
Changelog of 15-Feb-2014
-Omni codebase of 14-Jan
Several small fixes, nothing spectecular
It features the Infamous kernel (same kernel as for JB4.3, without SELinux). The zram code has been optimized (based on google advice for low-RAM devices) and is enabled by default.
To see the additions on top of Omni, check github (additional patches are always shown on top):
Frameworks
Settings
OmniGears
First installation:
-Boot into recovery
-Factory reset
-Wipe system partition
-Install ROM
-Boot tablet (there sometimes are bootloops if gapps is flashed directly on top of the ROM without first booting the ROM)
-Reboot recovery
-Install SuperSU: http://download.chainfire.eu/371/SuperSU/UPDATE-SuperSU-v1.85.zip
-Install gapps (you should use a package specifically for KK4.4 and with the old-fashioned updater-script! - don't worry if you install an outdated gapps packages with the correct updater-script, as long as it is for KK4.4 the apps in the gapps package will be automatically updated -> only small gapps packages fit, e.g. banks core of pa 0-day gapps mini)
-Boot it up
-> some people report issues (e.g. bootloop or crashing gapps) if they flash ROM, gapps & supersu in a row after fully wiping the tablet. In that case, wipe again, flash ROM, boot the tab, reboot to recovery, and then flash the rest.
-> if coming from stock ROM, a factory reset may wipe you entire /data partition, so you loose you sdcard contents as well (I think this only happens with CWM, but I'm not sure)
-> in CWM "wipe system partition" can be found under mounts, and is called "format /system"
->If you get the message 'This package is for "p4" devices this is a "GT-P7500"' (or something likewise) update to a recent CWM or TWRP
Update installation (OMNI -> OMNI):
-Boot into recovery
-Install ROM
-Install SuperSU (in the SuperUser app you can create a script that will automatically backup/restore SuperSU on ROM updates so you don't have to reflash SuperSU).
-Boot it up
You can download any gapps packages for kitkat that you like, but one that many have used successfullyis PA 0 day gapps:
http://forum.xda-developers.com/showthread.php?t=2397942
Downloads:
P4WIFI:
http://rootaxbox.no-ip.org/kasper_h/roms/p4wifi/omni44/
P4:
http://rootaxbox.no-ip.org/kasper_h/roms/p4/omni44/
Credits:
OMNI team for the code
AAccount for his help along the way to get KK4.4 to compile for our aging device!
pershoot for the basis for the device trees & kernel base
Code:
Basis of OMNI code: https://github.com/omnirom/
Common p4 device tree: https://github.com/kasperhettinga/android_device_samsung_p4-common
Device tree p4wifi: https://github.com/kasperhettinga/android_device_samsung_p4wifi
Vendor blobs p4wifi: https://github.com/kasperhettinga/android_vendor_samsung_p4wifi
Device tree p4wifi: https://github.com/kasperhettinga/android_device_samsung_p4
Vendor blobs p4wifi: https://github.com/kasperhettinga/android_vendor_samsung_p4
What does NOT work?
-There are graphical glitches. Although they mainly have been solved there seem to be some remaining issues with hwcomposer that may crash the tab.
-Bluetooth audio does not work (other Bluetooth functions do work).
-HDMI output (may be fixed according to some posts, didn't test myself yet)
-HD movies (in e.g. youtube) may stutter
Smoothness advice:
Go to performance settings:
-Overclock CPU to 1400MHz (Do this at your own risk!)
-Set IO scheduler to CFQ
-Keep governor on Interactive
Go to developer settings:
-Set the three animation scale options to 0.5x
-Activate "Force GPU rendering"
-Active "Disble HW-overlays"
-Set background process limit to 4 processes
(if performance/developer options are not yet shown, go to settings>about and press build number 7 times)
-> Thanks to all forum members contributing to this list
-> Do it at your own risk!
-> Don't complain about limited battery life (ROW+interactive+1000MHz leads to better battery life for sure)
Some other tips:
-For improvement of sound quality, you can use Viper4Android
-For more volume only, SpeakerBoost is earier to use
-For netflix, head over here: http://forum.xda-developers.com/showpost.php?p=49208063&postcount=445
-To be able to use Flash player, use a browser that doesn't use the kitkat browser engine (e.g. firefox can be used). Download flash player from adobe website (thanks to AAccount for finding out!).
- If you can't see your internal SD on PC: Go to Settings -> Storage -> 3 dot menu -> tick MTP.
-To use the multi-window feature, go to the recent apps screen, press&hold an app, and select put aside.
Great......downloading now
Sent from my GT-N7000 using Tapatalk
p4
is there any p4 version in progress br zezam?
Nice work :good:
you will get version and for the P7500 ?
kasper_h said:
Reserved
Click to expand...
Click to collapse
i'm new to Galaxy tab 10.1..LOL,,, can this ROM be installed directly from Stock ROM with TWRP,,,Please help ASAP
zezam67 said:
is there any p4 version in progress br zezam?
Click to expand...
Click to collapse
paiktaras said:
Nice work :good:
you will get version and for the P7500 ?
Click to expand...
Click to collapse
Kasper already said that he won't be building for the p4.
Looks like my P7500 is gonna be a P7510 soon..
BTW, we still need to flash supersu zip?
Sent from my GT-P7500 using Tapatalk HD
Xenodrome_ said:
i'm new to Galaxy tab 10.1..LOL,,, can this ROM be installed directly from Stock ROM with TWRP,,,Please help ASAP
Click to expand...
Click to collapse
Just wipe everything and flash the ROM.
eushaun99 said:
Kasper already said that he won't be building for the p4.
Looks like my P7500 is gonna be a P7510 soon..
BTW, we still need to flash supersu zip?
Sent from my GT-P7500 using Tapatalk HD
Click to expand...
Click to collapse
You need to separately flash SuperSU. SuperSU can create a script for backing it up, so that on future ROM flashes you don't have to repeat this.
oooppppsss the ROM can not be installed in a P4
Hi,
I have tried to install the ROM in a P4 and I receive an error saying "this device is a P4 and the ROM can not be installed"
esfjrg1 said:
Hi,
I have tried to install the ROM in a P4 and I receive an error saying "this device is a P4 and the ROM can not be installed"
Click to expand...
Click to collapse
Doh, its a p4wifi ROM. If you don't use 3g, flash a p4wofi recovery first, reboot, and flash again.
Sent from my GT-P7500 using Tapatalk HD
esfjrg1 said:
Hi,
I have tried to install the ROM in a P4 and I receive an error saying "this device is a P4 and the ROM can not be installed"
Click to expand...
Click to collapse
Flash P4wifi recovery, Then flash this ZIP again
Bad to see that it is really not for the GT-P7500 . So i will not update.... i really need my 3G
Why it is so difficult to get 3G working Did 4.4 change so much?
Traace said:
Flash P4wifi recovery, Then flash this ZIP again
Bad to see that it is really not for the GT-P7500 . So i will not update.... i really need my 3G
Why it is so difficult to get 3G working Did 4.4 change so much?
Click to expand...
Click to collapse
The problem is that in 4.4 the radio stuff has been redone. I also had problem with another device I develop for (SGS) to get the radio to work. And to develop a ROM for a device I don't own make it even more complicated. In the past weeks I sometimes flashed 10-15 testbuilds on a single day to try and fix something simple (like USB OTG). If someone else would test something for me, the progress would be way too slow.
But all my code is open source: someone with a p7500 can just grab all the code, adapt it to p7500 and compile it. And start the whole process of fixing bugs
I get a unfortunately, setup wizard has stopped error and can not pass it.. Anything to work around it?
Sent from my SPH-L720 using xda app-developers app
@kasper_h As you might awared, YouTube is broken. It ran the same problem at that time with my GT-N7000 with OMNI 4.4, they managed to fix it. Maybe you can check with herna on that thread.
So far so good running ART
Sent from my GT-N7000 using Tapatalk
I also get the com.google.process.location has stopped error but I can pass that one..
Sent from my SPH-L720 using xda app-developers app
kasper_h said:
First installation:
-Install gapps (you can download any gapps package you like, as long as it is specifically for JB4.3!)
Click to expand...
Click to collapse
Is there a difference between 4.3/4.4 gapps?
Sent from my myTouch 4G using Tapatalk
Chris4809 said:
I get a unfortunately, setup wizard has stopped error and can not pass it.. Anything to work around it?
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
Which gapps package? I flashed ROM & gapps myself today as well, just to test it once more. And it works flawlessly.
rogconnect said:
@kasper_h As you might awared, YouTube is broken. It ran the same problem at that time with my GT-N7000 with OMNI 4.4, they managed to fix it. Maybe you can check with herna on that thread.
So far so good running ART
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
Youtube is a problem with some hardware blobs I believe. I had the same on AOKP. I have spend a lot of time, but could never solve it. I decided to ignore it
Chris4809 said:
I also get the com.google.process.location has stopped error but I can pass that one..
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
jaibar said:
Is there a difference between 4.3/4.4 gapps?
Sent from my myTouch 4G using Tapatalk
Click to expand...
Click to collapse
Yes, you should only use kitkat (4.4) gapps!
kasper_h said:
Which gapps package? I flashed ROM & gapps myself today as well, just to test it once more. And it works flawlessly.
Youtube is a problem with some hardware blobs I believe. I had the same on AOKP. I have spend a lot of time, but could never solve it. I decided to ignore it
Yes, you should only use kitkat (4.4) gapps!
Click to expand...
Click to collapse
If it is 4.4 gapps you might want update the OP.. It is telling us that we should use 3.4
Sent from my SPH-L720 using xda app-developers app
After enabled ART on first boot then rebooted. And then rebooted to recovery to install Banks 12-14_GApps_Core_4.4.2_signed.zip.. then I can signed in Google...so far no FC on Google apps.
Sent from my GT-P7510 using Tapatalk
I'm getting the "setup wizard has stopped" error also.
Coming from pac_P4wifi_4.3-Infamous_20131114
Followed install instructions.
Used gapps-jb-20130813-signed
Cannot find gapps for 4.4. The 20130813 (4.3) package seems to be the most current.
Official Thread will be soon up! Head over there guys.
This thread is dead!
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on CyanogenMod so use custom kernels compatible with them!
A special thanks to @forkbomb444. crDroid is available thanks to him. I'm using his devices, kernel, proprietary vendor and many other repos to build
All the source code for crDroid is available in the Github
repo. And if you would like to contribute feel free to pull a request.
Kernel features beyond CyanogenMod ones (Work in Progress) [Future Release]
• Boeffla Charging Control
• Boeffla Sound.
All this can be initiated through some script knowledge.
INSTALLATION METHOD
First time installing crDroid to your I9300, or coming from another ROM:
- Make sure you're running a proper working Recovery (CWM or TWRP)
- Copy GApps and crDroid zip to your internal SDCard
- Boot into Recovery
- Flash crDroid zip
- Flash GApps zip
-Note: Flash ROM and GApps together or else you'll have a hard time.
- Flash SuperSU (not mandatory. We have
CyanogenMod su access inside)
- DO A DATA WIPE / FACTORY RESET
- Reboot
- Don't restore Apps using Titanium Backup!
Upgrading from earlier version of crDroid:
- Copy crDroid ZIP to your internal SDCard
- Boot into Recovery
- Flash crDroid zip
- Reboot
Download Link:
https://www.androidfilehost.com/?fid=24415232478677728
GApps: opengapps.org
Full support
https://plus.google.com/communities...4243234a-de8a-4262-bd30-68582ebeb472?hl=pt_br
Don't expect any support if you
- are not running stock crDroid-kernel
- have installed any mods such Xposed!
- have modified system files
Special thanks:
- Google
- CyanogenMod
- @forkbomb444
- @temasek
- @Darkened_Sky
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
Source: http://www.github.com/cyanogenmod
https://github.com/crdroidandroid
Reserved 1 (Screenshots)
Someone please share some screenshots!
FAQ
Do read this before asking questions!
1. Q: How do I get root?
A: Enable it in developer options.
2. Q: But can I use SuperSU instead of the built-in SU?
A: Sure. Make sure that the built-in SU is disabled in developer settings. Afterwards flash SuperSU. By default after a clean flash built-in SU is disabled, so you can also directly flash SuperSU after a clean flash
3. Q: Which gapps do I need?
A: This ROM is based on CM13/Android 6.0x/Marshmallow. Therefore choose your gapps accordingly. If you want to use the recommended opengapps, choose the ARM 6.0 version. I highly suggest to use either the pico or the nano package. All other gapps can later still be installed via playstore!
4. Q: Help! I have a problem/issue/bootloop/....?
A: Please follow these steps:
1. Make sure that the problem is not already mentioned in either this thread or in the CM13 thread.
2. Make sure that you can reproduce the problem on your device with absolutely no additional modification and after a clean flash. This includes being on stock kernel, no xposed, no SuperSU, no theme!
3. Try to replicate the problem on official CM13. If it appears there, please ask there.
4. If your problem couldn't be solved with above steps, post here, with an exact description of how to reproduce and if possible with logs.
5. Q: Is xposed working?
A: Yes but make sure to use the latest and the correct version for Marshmallow. Inform yourself in the xposed thread. Everything is clearly explained there which version you need. The version that works for you on official CM13 will also work here.
6. Q: Can I use custom kernels?
A: Yes. Users which use SuperSU frequently report problems with bootloops after flashing a custom kernel. Therefore I'd suggest to use built-in SU.
7. Q: I have added files to my system, but after each ROM update they disappear?
A: Yes during a flash the /system partition is wiped.
yess i'v ben waiting for this rom to get MM
ayoubadri said:
yess i'v ben waiting for this rom to get MM
Click to expand...
Click to collapse
What you waiting for? Give it a try
nice new rom for s3 thinks Dev
spide3 said:
nice new rom for s3 thinks Dev
Click to expand...
Click to collapse
Download and Flash! Enjoy
P.S: I am not the developer of this ROM! I have just created this thread. Though I can do a bit of coding. So, for all bootloops or random reboots I need proper information
sunny1234590 said:
P.S: I am not the developer of this ROM! I have just created this thread. Though I can do a bit of coding. So, for all bootloops or random reboots I need proper information
Click to expand...
Click to collapse
ROM is awesome, but i havenot mobile data... cellular radio working, i have reception but i havenot mobile data. APN is right. GT-I9300
jujuna said:
ROM is awesome, but i havenot mobile data... cellular radio working, i have reception but i havenot mobile data. APN is right. GT-I9300
Click to expand...
Click to collapse
No bug on my device. Using stock kernel?
Are you maintaining this ROM now?
sameer23 said:
Are you maintaining this ROM now?
Click to expand...
Click to collapse
I have opened this thread on the behalf of the original developer but yes, I'll keep it updated with new builds. So, kind of Yes!
sunny1234590 said:
No bug on my device. Using stock kernel?
Click to expand...
Click to collapse
my kernel is 3.0.101-CM-gbe3d845 [email protected] #1 << is it a stock?
jujuna said:
my kernel is 3.0.101-CM-gbe3d845 [email protected] #1 << is it a stock?
Click to expand...
Click to collapse
Yes, it is stock. Try a clean flash and report back!
Do you face this issue on official CM13 also?
sunny1234590 said:
Yes, it is stock. Try a clean flash and report back!
Do you face this issue on official CM13 also?
Click to expand...
Click to collapse
yes, on Official CM13 i had this proble. only AICP marshmallow rom i havenot this problem. crDroid, bliss, an etc i have this problem. my installation was clean 100%.
jujuna said:
yes, on Official CM13 i had this proble. only AICP marshmallow rom i havenot this problem. crDroid, bliss, an etc i have this problem. my installation was clean 100%.
Click to expand...
Click to collapse
I see! Can you tell me which baseband version you have?
And it's strange considering the fact that AICP is also based on Official CM13 just like crDroid!
sunny1234590 said:
I see! Can you tell me which baseband version you have?
And it's strange considering the fact that AICP is also based on Official CM13 just like crDroid!
Click to expand...
Click to collapse
i know, its weird for me too.. my baseband version is I9300XXEMG4 and IP 192.168.0.100 fe80::237:6dff:fef2:c4a0
jujuna said:
i know, its weird for me too.. my baseband version is I9300XXEMG4 and IP 192.168.0.100 fe80::237:6dff:fef2:c4a0
Click to expand...
Click to collapse
That's a slightly older baseband version if I am correct. Just try to flash the latest baseband and see if it makes some difference though I doubt.
Since, I can't reproduce this error so, it's not a bug for me at least. Someone else must confirm about the mobile data thing.
Hi guys,
I can't give root permission to apps.
I've enabled Developer Options, and enabled Root Access to Apps, but when I try to run an app that needs root, it doesn't ask permissions.
Could you give me a hint?
Thanks
sunny1234590 said:
That's a slightly older baseband version if I am correct. Just try to flash the latest baseband and see if it makes some difference though I doubt.
Since, I can't reproduce this error so, it's not a bug for me at least. Someone else must confirm about the mobile data thing.
Click to expand...
Click to collapse
i flashed but no result
LineageOS 14.1 by karevn (unofficial)
Hey folks, since our beloved LOS 14 by Razziell was apparently discontinued because Razziell retired and took off all of his ROM Downloads, I went on 4pda and searched for alternatives.
With the help of Google Translate I was actually able to find this ROM by karevn, which is a direct fork of Razziell's version and since runs as stable as the old ROM.
DISCLAIMER: This is not my work by any means, I only discovered this ROM and thought it should be on xda too.
This ROM has some additional features ahead of Razziells version, most importantly OTA Updates!
Yes, It's true, this ROM will update automatically OTA when new versions are released, I could verify this myself.
Download:
I mirrored the Download on my Google Drive, since it is a little inconvenient to download from Yandex.Disk if you have no account there already.
Google Drive: here
Yandex.Disk: here
Yandex.disk 06.10.17: here
Yandex.disk 20.10.17:
here
Mirror 20.10.17:
here
Installation is not different to any other Custom ROM, just clean flash the downloaded ZIP via TWRP, then flash GAPPS (I recommend the Nano package)
[Detailed instructions for installation:]
Download ROM Zip to Internal Storage or microSD-Card
Boot to TWRP
Click Wipe --> Advanced Wipe and select Dalvik/ART-Cache, System, Data and Cache, donÄt select Internal Storage unless you want to wipe your documents, downloads etc.
Click the home-button and then select install
Select the downloaded Zip-File, then click 'Add more Zips' to select other, optional Zips like GAPPS, Magisk etc.
After Installation is finished do Dalvik Cache / Cache wipe
Reboot to System
Your Done!
At first I tried flashing this as kind of a continuous update from Razziells LOS 14.1, since it's using the same sources with little tweaks, which worked fine at first, but later showed problems in the form of repeating App Crashes of certain apps (mostly Google Apps) which didn't go away even after formatting /system and installing the ROM and GAPPS again, so I had to do a full clean flash unfortunately :crying:
I don't recommend trying the same as I did, since it turned out very unstable and not really usable. So simply do a clean flash and you're good to go!
Useful: official TWRP download link, discontinued, but very stable: here
Old Thread of Razziell LOS ROM: here
[SOURCE]
Strange...
I flashed this rom over old one(0904 build+0910 bootimg), but mine is super stable...
Using gapps pico latest version.
How about the battery 100% bug? Is it present in this rom?
mhmd_azmi said:
How about the battery 100% bug? Is it present in this rom?
Click to expand...
Click to collapse
I didn't experience that bug.
This ROM is near perfect (yet)
TFS.
Flashed it over 0904 Razziell build with pico gapps,
only cache & dalvik wiped.
works without hiccups.
kernel bit of downgrade in this build.
lack the frequency stages compare to Razziell 0910 LOS Kernel.
look the screenshots.
Just re-flashed 0910 kernel.
Seems normal. Will update if there is stange hiccups
mhmd_azmi said:
How about the battery 100% bug? Is it present in this rom?
Click to expand...
Click to collapse
Haven't seen this yet, but didn't experience it on the old Razziell ROM, so maybe this bug is kind of device specific... And I really don't care if it's present, so for me it doens't matter... But if I experience it on this ROM I will tell you...
Gezine said:
Just re-flashed 0910 kernel.
Seems normal. Will update if there is stange hiccups
Click to expand...
Click to collapse
Didn't see this kernel yet. Can you link it for me?
InterFelix said:
Didn't see this kernel yet. Can you link it for me?
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=73749910&postcount=70
http://rgho.st/6MMmxryPM
0910 Build kernel from Razziell
Gezine said:
https://forum.xda-developers.com/showpost.php?p=73749910&postcount=70
http://rgho.st/6MMmxryPM
0910 Build kernel from Razziell
Click to expand...
Click to collapse
Thanks, already flashed it and works fine!
I flashed over the existing crDroidAndroid. A shame the latter had really nice features but some bugs were too intrusive.
Google Apps Services kept crashing, so I had to reflash the Gapps and somewhat reinstall all apps. :/
UserU said:
I flashed over the existing crDroidAndroid. A shame the latter had really nice features but some bugs were too intrusive.
Google Apps Services kept crashing, so I had to reflash the Gapps and somewhat reinstall all apps. :/
Click to expand...
Click to collapse
You flashed over another ROM....
Flash with full wipe.
mhmd_azmi said:
How about the battery 100% bug? Is it present in this rom?
Click to expand...
Click to collapse
Yeap It's there.
N1ck474 said:
You flashed over another ROM....
Flash with full wipe.
Click to expand...
Click to collapse
Yes, it's never a good idea to flash one custom ROM over another. There are completely different tweaks made in crDroid, it's almost a miracle that it even booted, please do me a favour and wipe /system and /data as well as both caches and then clean flash it again, so you won't experience weird bugs that no one else has...
Use it with Voodoo kernel. Best combo
I came from validus and i forgot to wipe data (wiped cache system and dalvik), but it works flawlessly
Up to now perfect rom
that's has same bugs with 04/09/2017 version,didn't require some issue,we discussion bugs from this linkshttps://forum.xda-developers.com/redmi-4-prime/how-to/news-lineage-4-9-17-available-t3667906
Alright, Now I'm experiencing the 100% but as well, just so that everyone knows, now I can confirm this bug too... Additionally, the bug with sticking charge notifications is there too...
Karevn says he solved the problem with a double tap on the EBBG screen.
4PDA post
clean flashed this rom, using for 3 days & battery stat stick 100% did not happened to me,
everything went ok so far