Hello,
I unlocked my bootloader through HTC, placed TWRP in the same folder such as adb and then booted into it. However, when I try to run any of the options such as install, it prompts me to swipe to unlock but I'm unable to swipe to unlock.
I've found that if I press the hard home key, I can then swipe to unlock, but it acts as if I never selected an option. Has anyone had this happen?
rpinney said:
Hello,
I unlocked my bootloader through HTC, placed TWRP in the same folder such as adb and then booted into it. However, when I try to run any of the options such as install, it prompts me to swipe to unlock but I'm unable to swipe to unlock.
I've found that if I press the hard home key, I can then swipe to unlock, but it acts as if I never selected an option. Has anyone had this happen?
Click to expand...
Click to collapse
Make sure you have the right firmware/TWRP combination. 4.2.2 firmwares work with TWRP 2.6.0.1 (TWRP was updated to support the touch drivers in the 2.17 and 2.24 version firmwares. 4.1.2 firmwares work with an M7 specific version of TWRP 2.5.0.0.
dgtiii said:
Make sure you have the right firmware/TWRP combination. 4.2.2 firmwares work with TWRP 2.6.0.1 (TWRP was updated to support the touch drivers in the 2.17 and 2.24 version firmwares. 4.1.2 firmwares work with an M7 specific version of TWRP 2.5.0.0.
Click to expand...
Click to collapse
Crap. I'm using 2.6.0.0, but it was the one that was listed to use if you have a Sprint One. It didn't give an option to use .01.
rpinney said:
Crap. I'm using 2.6.0.0, but it was the one that was listed to use if you have a Sprint One. It didn't give an option to use .01.
Click to expand...
Click to collapse
Sprint is different, I am not sure of the version for your device if its Sprint. Did you check on the Sprint HTC One forum?
dgtiii said:
Sprint is different, I am not sure of the version for your device if its Sprint. Did you check on the Sprint HTC One forum?
Click to expand...
Click to collapse
I looked through and did a search, but I didn't see anything relevant. Should I repost in there?
rpinney said:
I looked through and did a search, but I didn't see anything relevant. Should I repost in there?
Click to expand...
Click to collapse
Yeah, I would repost there too!
dgtiii said:
Yeah, I would repost there too!
Click to expand...
Click to collapse
I actually ended up figuring out how to fix:
Version 2.6.0.0 from TWRP is bad. What you'll have to do is download 2.5.0.0. and put the recovery file into your android\sdk\platform-tools folder and use this command to push it to your phone: fastboot flash recovery openrecovery-twrp-2.5.0.0-m7wls.img.
Yep, that's how you flash a recovery. Good job, I'm glad you figured it out! Sorry I couldn't help more.
Stuck on twrp can't swipe
I really need help on this one. I been searching for the night till today morning and nver find a soulution to problem.
I have HTC One Lte. International since i bought it one of the mall in Qatar. Yesterday, i Decide to Unlock bootload and Root it. I use AIO 3.1.
Now its tampered and unlocked and select perm root.
I booted on system and find the SU is not intalled. So what i do is fastboot again and select perm. boot again. then i reboot after. Then After entering to twrp 2.5 recovery. I can swipe the screen. then i search and find 2.6.1.download it, but when i try connect it to AIO. Can find the my phone. So i decide to do it manually by going to cmd and push twrp 2.6.1.
Now when i booted, twrp is working well. i was able to back up. but after rebooting to system. twrp 2.5.0 open up. Now my phone running both twrp 2.5 and 2.6.1!
Thsi the detail of my phone.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 4095mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Hope someone can help.
---------- Post added at 10:01 AM ---------- Previous post was at 09:57 AM ----------
By the way. Hope someone can tell me step by step on resolving this issue. i can only fast on cmd but not on AIO. I hope i didnt brick my phone.
Manay thanks for those will reply to my SOS!
blackknightrealms said:
I really need help on this one. I been searching for the night till today morning and nver find a soulution to problem.
I have HTC One Lte. International since i bought it one of the mall in Qatar. Yesterday, i Decide to Unlock bootload and Root it. I use AIO 3.1.
Now its tampered and unlocked and select perm root.
I booted on system and find the SU is not intalled. So what i do is fastboot again and select perm. boot again. then i reboot after. Then After entering to twrp 2.5 recovery. I can swipe the screen. then i search and find 2.6.1.download it, but when i try connect it to AIO. Can find the my phone. So i decide to do it manually by going to cmd and push twrp 2.6.1.
Now when i booted, twrp is working well. i was able to back up. but after rebooting to system. twrp 2.5.0 open up. Now my phone running both twrp 2.5 and 2.6.1!
Thsi the detail of my phone.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 4095mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Hope someone can help.
---------- Post added at 10:01 AM ---------- Previous post was at 09:57 AM ----------
By the way. Hope someone can tell me step by step on resolving this issue. i can only fast on cmd but not on AIO. I hope i didnt brick my phone.
Manay thanks for those will reply to my SOS!
Click to expand...
Click to collapse
So what version works? 2.6.0.1?
Which version does your phone boot into when you select 'recovery' in bootloader?
Can you still access your working phone/ROM?
blackknightrealms said:
I really need help on this one. I been searching for the night till today morning and nver find a soulution to problem.
I have HTC One Lte. International since i bought it one of the mall in Qatar. Yesterday, i Decide to Unlock bootload and Root it. I use AIO 3.1.
Now its tampered and unlocked and select perm root.
I booted on system and find the SU is not intalled. So what i do is fastboot again and select perm. boot again. then i reboot after. Then After entering to twrp 2.5 recovery. I can swipe the screen. then i search and find 2.6.1.download it, but when i try connect it to AIO. Can find the my phone. So i decide to do it manually by going to cmd and push twrp 2.6.1.
Now when i booted, twrp is working well. i was able to back up. but after rebooting to system. twrp 2.5.0 open up. Now my phone running both twrp 2.5 and 2.6.1!
---------- Post added at 10:01 AM ---------- Previous post was at 09:57 AM ----------
[/COLOR]By the way. Hope someone can tell me step by step on resolving this issue. i can only fast on cmd but not on AIO. I hope i didnt brick my phone.
Manay thanks for those will reply to my SOS!
Click to expand...
Click to collapse
I am not sure what you mean when you said you cannot connect to AIO, I assume you mean ADB. You may have to update your SDK files to get ADB to work.
Next issue. What do you mean when "So i decide to do it manually by going to cmd and push twrp 2.6.1". Fastboot flash recovery recovery.img is the command you need to upgrade your TWRP version (for example, fastboot flash recovery TWRP_2.6.0.1.img, or whatever the name of your TWRP file is). I think you still have TWRP version 2.5 installed, use the command I listed to install 2.6.01. Make sure the 2.6.0.1 file is in the same folder as your fastboot SDK files.
Thsi what happen. I use all in onw toolkit 3.1. done everything there.tampered and unlock.. I rebooted my One. then i see there is no supersu. so i fastboot again and push perm root on ALL in One toolkit. the reboot. then TWRP shown which i can't swipe. i fastboot again. then try connecting it again to AIO 3.1 but device not detected. So i decided by using adb by pushing TWRP 2.6.1 which i find. It load. go to recovery. backup.install SU. the reboot to to system. After it reboot to HTC logo. Then TWRP 2.5.0 showned next. then i can't swt to unlock or even the butoon are not running.
Apology. i kind noob in this way and trying to find answer for the pas 25 hrs. kinda paranoid. thanks for reply too. hope this can be solved
---------- Post added at 11:44 AM ---------- Previous post was at 11:37 AM ----------
redbull123 said:
So what version works? 2.6.0.1?
Which version does your phone boot into when you select 'recovery' in bootloader?
Can you still access your working phone/ROM?
Click to expand...
Click to collapse
2.6.01. is working. but when i boot to system. it rebooted back to 2.5.0
By using All in One tool kit. Not possible. but by using CMD line. I was able to access detail of my phone. how can i remove twrp 2.5??/
so 2.6.1 will be remain. Still now i can able to pass 2.5 to reboot on my phone..
---------- Post added at 11:50 AM ---------- Previous post was at 11:44 AM ----------
dgtiii said:
I am not sure what you mean when you said you cannot connect to AIO, I assume you mean ADB. You may have to update your SDK files to get ADB to work.
Next issue. What do you mean when "So i decide to do it manually by going to cmd and push twrp 2.6.1". Fastboot flash recovery recovery.img is the command you need to upgrade your TWRP version (for example, fastboot flash recovery TWRP_2.6.0.1.img, or whatever the name of your TWRP file is). I think you still have TWRP version 2.5 installed, use the command I listed to install 2.6.01. Make sure the 2.6.0.1 file is in the same folder as your fastboot SDK files.
Click to expand...
Click to collapse
i place 2.6.1 along side of c: android. Inside this folder are adb exe,adbwinapi.dll, fastboot and twrp 2.6.1. I already push this version and it work. but i thought it will over write twrp 2.5.
Should i put back the files inside the folder of skd??
Where is the command to install this 2.6.1 and over write or remove 2.5.?
blackknightrealms said:
Thsi what happen. I use all in onw toolkit 3.1. done everything there.tampered and unlock.. I rebooted my One. then i see there is no supersu. so i fastboot again and push perm root on ALL in One toolkit. the reboot. then TWRP shown which i can't swipe. i fastboot again. then try connecting it again to AIO 3.1 but device not detected. So i decided by using adb by pushing TWRP 2.6.1 which i find. It load. go to recovery. backup.install SU. the reboot to to system. After it reboot to HTC logo. Then TWRP 2.5.0 showned next. then i can't swt to unlock or even the butoon are not running.
Apology. i kind noob in this way and trying to find answer for the pas 25 hrs. kinda paranoid. thanks for reply too. hope this can be solved
---------- Post added at 11:44 AM ---------- Previous post was at 11:37 AM ----------
2.6.01. is working. but when i boot to system. it rebooted back to 2.5.0
By using All in One tool kit. Not possible. but by using CMD line. I was able to access detail of my phone. how can i remove twrp 2.5??/
so 2.6.1 will be remain. Still now i can able to pass 2.5 to reboot on my phone..
Click to expand...
Click to collapse
Ok, first of all - stop using the toolkit.
Go into fastboot in your bootloader so it shows 'FASTBOOT USB' then command
Code:
fastboot devices
If your device shows, command
Code:
fastboot erase cache
Once this is done, make sure your 2.6.0.1.img file is in your fastboot folder and command
Code:
fastboot flash recovery name_of_your_2.6.0.1_recovery.img
redbull123 said:
Ok, first of all - stop using the toolkit.
Go into fastboot in your bootloader so it shows 'FASTBOOT USB' then command
Code:
fastboot devices
If your device shows, command
Code:
fastboot erase cache
Once this is done, make sure your 2.6.0.1.img file is in your fastboot folder and command
Code:
fastboot flash recovery name_of_your_2.6.0.1_recovery.img
Click to expand...
Click to collapse
ok. this what i do as instructed.
C:\Android>fastboot devices
XXXXXXXXX fastboot
C:\Android>fastboot erase cache
erasing 'cache'...
OKAY [ 0.038s]
finished. total time: 0.038s
C:\Android>fastboot flash recovery openrecovery-twrp-2.6.0.1-m7.img
sending 'recovery' (8014 KB)...
OKAY [ 1.241s]
writing 'recovery'...
OKAY [ 0.648s]
finished. total time: 1.890s
then push power to hboot. then to recovery. Recover to twrp 2.6.1. ok.
first and second try. when i rebooted to system. it recover again to 2.5...
blackknightrealms said:
ok. this what i do as instructed.
C:\Android>fastboot devices
SH35XW900196 fastboot
C:\Android>fastboot erase cache
erasing 'cache'...
OKAY [ 0.038s]
finished. total time: 0.038s
C:\Android>fastboot flash recovery openrecovery-twrp-2.6.0.1-m7.img
sending 'recovery' (8014 KB)...
OKAY [ 1.241s]
writing 'recovery'...
OKAY [ 0.648s]
finished. total time: 1.890s
then push power to hboot. then to recovery. Recover to twrp 2.6.1. ok.
first and second try. when i rebooted to system. it recover again to 2.5...
Click to expand...
Click to collapse
Weird.. I've never heard of that.. So what is it you want to do while in 2.6.0.1? If it were me ( I'm not saying this is the correct answer), I would try flashing a stock ROM like this one then root it later:
http://forum.xda-developers.com/showthread.php?t=2224752
Or now might be a good chance for you to try out a close-to-stock custom ROM such as 'ARHD' which comes already rooted.
redbull123 said:
Weird.. I've never heard of that.. So what is it you want to do while in 2.6.0.1? If it were me ( I'm not saying this is the correct answer), I would try flashing a stock ROM like this one then root it later:
http://forum.xda-developers.com/showthread.php?t=2224752
Or now might be a good chance for you to try out a close-to-stock custom ROM such as 'ARHD' which comes already rooted.
Click to expand...
Click to collapse
Lets say your are me. Which is the best option. Anything support my current version? and will not give me head ache in the end but enjoy the phone?
Does this stock rom will do for my psoted version??pleaseeee! I need this phone!:crying:
Thanks in advance! and waiting for your recommendation.
well, using AIO toolkit and asb is not a good partner.
What do you think is common reason why i arrived to this?? I booted to my system before i reboot to 2.5 which i can't use. so thats why i try 2.6.1. And why this 2.5 kept staying on?? Does the procedure in flashing rom in AOI place it in different place so that this 2.6.1 seem can't over write it??
any one suggestion???
TWRP 2.6.1 and 2.5 on my ONE
Guys! any taker??? please share your knowledge on a noob like me. is there anyway i can remove TWRP 2.5 and leave TWRP 2.6.1?
Appreciate for a big help! thanks
blackknightrealms said:
Guys! any taker??? please share your knowledge on a noob like me. is there anyway i can remove TWRP 2.5 and leave TWRP 2.6.1?
Appreciate for a big help! thanks
Click to expand...
Click to collapse
Did you try flashing a rom like I said?
Sent from my HTC One using xda premium
redbull123 said:
Did you try flashing a rom like I said?
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
Bro. Do you think the present available rom should work on my unit specs?? Thats the only stopping me. i already collected and download needed files. But after i messed up my One. I have to make sure what step should i do. I will not blame it on anyone. Its really hard to read all post. its really quite long. Just only making sure that a same unit already installed with the same rom. But i'm still thinking which are better. but my first choice will ARHD. Since they put so much improvement. And I only making sure thats the last option i will take. If there is no other solution to resolve my present predicament then so be it. If i was able to flash back my stock rom. So please guide me if you don't mind. So what do you think bro?? Thanks again for responding to my SOS. Good day!
Related
Hello-
Here is the fast version:
HTC One GPE with stock JB rom and clockwork mod recovery.
Last night I flashed the recovery to a stock version I found on the boards here. This morning the most recent JB update was ready for installation on the phone. A while after that KitKat was ready and I installed. As soon as I did, the phone entered a boot loop and will not stay on. I've cleared the cache and factory reset with no luck. A kind individual on another thread attempted to help resolve the issue but no such luck.
I tried reinstalling 4.4 (having to relock my bootloader was the only way I could successfully attempt reloading, but it did not work. S-off is ON.
Now, I cannot enter a custom recovery (nor a recovery of any kind at this moment). Any time I select recovery it just reboots the phone.
Here are previous errors I received while attempting fastboot flash:
bootloader) adopting the signature contained in this image...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
FAILED (remote: 24 parsing android-info fail)
Here is my fastboot getvar all:
c:\And>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4T.21.3218.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: GOOGL001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4241mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-5d4c562c
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
I appreciate any help you may be able to offer. I've never had this much trouble with a phone before (somewhat of a novice, but this is beyond me).
Thank you!!!
unlock the bootloader again and install a custom recovery
then install the zip from here using adb sideload: http://forum.xda-developers.com/showthread.php?t=2341395
Right, so your bootloader is locked or unlocked? If locked, are you able to unlock it?
SaHiLzZ said:
Right, so your bootloader is locked or unlocked? If locked, are you able to unlock it?
Click to expand...
Click to collapse
I use the command "fastboot oem lock" and "fastboot oem unlock" to lock and unlock the device (since it's google play edition), unless that is for unlocking something else besides the bootloader.
I cannot open the recovery so I don't know what is on there. I've loaded TWRP with fastboot but every time I select recovery from the menu on the phone it reboots the phone.
Here is what I get when I search for the phone. I assume the adb is not seeing it since I have not set up the phone for that option?
c:\And>adb devices
List of devices attached
c:\And>fastboot devices
HT36JW912382 fastboot
Can you download either CWM or TWRP and try the following from bootloader:
fastboot boot nameofrecovery.img
For example: If you get http://flyhalf205.com/recoveries/recovery-clockwork-touch-6.0.4.5-m7ul.img
then fastboot boot recovery-clockwork-touch-6.0.4.5-m7ul.img in fastboot mode
Does the phone reboot into recovery now?
c:\And>fastboot boot openrecovery-twrp-2.6.3.3-m7.img
downloading 'boot.img'...
OKAY [ 1.202s]
booting...
OKAY [ 0.001s]
This just froze the phone.
It will NOT boot into recovery. Just turns on and shows "Google"
QUOTE=SaHiLzZ;47949555]Can you download either CWM or TWRP and try the following from bootloader:
fastboot boot nameofrecovery.img
For example: If you get http://flyhalf205.com/recoveries/recovery-clockwork-touch-6.0.4.5-m7ul.img
then fastboot boot recovery-clockwork-touch-6.0.4.5-m7ul.img in fastboot mode
Does the phone reboot into recovery now?[/QUOTE]
Try the recovery linked and twrp 2.6.3.0?
fastboot erase cache
damon7620 said:
fastboot erase cache
Click to expand...
Click to collapse
SaHiLzZ said:
Try the recovery linked and twrp 2.6.3.0?
Click to expand...
Click to collapse
I have cleared the cache before and after loading the custom recovery. and I loaded the CWR recovery. Still will not load into recovery. Just turns off and boots to Google.
i was able to successfully re-load the stock recovery. Any suggestions from this point?
How? What recovery did you use?
Go to bootloader and a do a factory reset from bootloader, it should boot into stock recovery and wipe , (should not just get kicked out right away)
What's the result after doing this.?
SaHiLzZ said:
How? What recovery did you use?
Go to bootloader and a do a factory reset from bootloader, it should boot into stock recovery and wipe , (should not just get kicked out right away)
What's the result after doing this.?
Click to expand...
Click to collapse
I used one I found somewhere in this thread. http://forum.xda-developers.com/showthread.php?t=2358781&highlight=recovery
I cannot recall the exact one. It is the same one I installed last night before this morning's update.
I did the wipe and loaded into bootloader. Rebooted the phone and is now in a boot loop.
Hi @The_Doctor_Who here's what I would recommend:
- fastboot oem unlock (if not already in the unlocked state)
- download the latest official ClockworkMod touch recovery for m7ul directly from here: http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-6.0.4.3-m7ul.img
- fastboot boot recovery-clockwork-touch-6.0.4.3-m7ul.img
Note the use of 'boot' instead of 'flash' for the last command... let's narrow this down and see if you can just boot a well-known/official recovery for this model without flashing anything. Sorry if these steps seem repetitive at this point, but it's a little hard to know what all has been done.
goldenratio said:
Hi @The_Doctor_Who here's what I would recommend:
- fastboot oem unlock (if not already in the unlocked state)
- download the latest official ClockworkMod touch recovery for m7ul directly from here: http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-6.0.4.3-m7ul.img
- fastboot boot recovery-clockwork-touch-6.0.4.3-m7ul.img
Note the use of 'boot' instead of 'flash' for the last command... let's narrow this down and see if you can just boot a well-known/official recovery for this model without flashing anything. Sorry if these steps seem repetitive at this point, but it's a little hard to know what all has been done.
Click to expand...
Click to collapse
Hey! Thank!
I understand re: not knowing. I've tried using that recovery and cannot get into it. I also tried the fastboot boot and it froze the phone (someone motioned HTC removed the ability to use 'boot' with the hboot 1.54). I tried leting the phone sit in the frozen state but it would not do anything.
The_Doctor_Who said:
I've tried using that recovery and cannot get into it. I also tried the fastboot boot and it froze the phone.
Click to expand...
Click to collapse
I see. Do I understand the the sequence of events correctly:
- you flashed a stock JB ROM
- then flashed the stock recovery (which file exactly? was it for m7ul?)
- the phone booted okay at this point and prompted you for 2 over-the-air system updates:
= an update for JB
= an update to KitKat
- things broke at this point?
The_Doctor_Who said:
someone motioned HTC removed the ability to use 'boot' with the hboot 1.54.
Click to expand...
Click to collapse
Do you have a link for that thread handy? I wonder if it's trivial or not to downgrade the radio (HBOOT)... I haven't tried before.
goldenratio said:
I see. Do I understand the the sequence of events correctly:
- you flashed a stock JB ROM
- then flashed the stock recovery (which file exactly? was it for m7ul?)
I will have to find the file. I believe it was. It was indicated that the stock recovery was from the GPE One.
- the phone booted okay at this point and prompted you for 2 over-the-air system updates:
= an update for JB
= an update to KitKat
- things broke at this point?
The update for JB was fine. I was checking twitter, facebook, etc. Then the KitKat update came in. I selected download and install and that is where the problem started.
Do you have a link for that thread handy? I wonder if it's trivial or not to downgrade the radio (HBOOT)... I haven't tried before.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=47972147&postcount=16
From what I have seen downgrading is not an option, but I could be wrong.
@The_Doctor_Who thanks for the link. It doesn't specifically say you can't use 'fastboot boot' on the GPE version of HBOOT. I'm pretty sure you can (assuming things are working otherwise). At least, I had a version of the 1.54 HBOOT on m7ul which didn't seem to have this restriction... I don't know the exact version number unfortunately.
That aside, it does seem that the recovery partition may be corrupted or in a bad state somehow. I'm going to reply on the other thread since those guys seem to have some good info and have been super helpful. I have a couple of ideas I'll post there.
At this point what I would recommend is to use the factory images for it and attempt to restore it to full stock before trying to go any further.
Good day all
I have been running CM 10.2 on my One for some months. Recently its started playing up so ive decided to go back to stock.
Ive googled the process. Fastboot works OK and see's my One connected OK.
Im having issues figuring out what RUU I should be downloading. Initially I went for RUU_M7_U_JB_50_HTC_Europe_1.29.401.2
After a number of minutes it failed and said something like it cannot use this on my phone. My phone is a UK purchased unlocked device. Can anyone point me at the correct RUUI should download?
Looking at the fastboot screen I can see that my OS is 2.24.401.8
hboot is 1.54.0000
Please, any pointers to get a stock OS installed and my device booting again.
phupton said:
Looking at the fastboot screen I can see that my OS is 2.24.401.8
hboot is 1.54.0000
Please, any pointers to get a stock OS installed and my device booting again.
Click to expand...
Click to collapse
you won't get much help till you post your fastboot getvar all results
minus your serial no and IEMI
clsA said:
you won't get much help till you post your fastboot getvar all results
minus your serial no and IEMI
Click to expand...
Click to collapse
Thanks for the starter...
form-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.401.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: 00000000000
(bootloader) imei: 0000000000000
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4103mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.080s
phupton said:
Thanks for the starter...
form-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-main: 2.24.401.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
finished. total time: 0.080s
Click to expand...
Click to collapse
You can flash this (compatible with your firmware, CID & MID): http://www.htc1guru.com/dld/guru_reset_m7_2-24-401-8-zip/
if you want to receive OTAs, you'll need to select "stock recovery" (which will overwrite custom recovery).
nkk71 said:
You can flash this (compatible with your firmware, CID & MID): http://www.htc1guru.com/dld/guru_reset_m7_2-24-401-8-zip/
if you want to receive OTAs, you'll need to select "stock recovery" (which will overwrite custom recovery).
Click to expand...
Click to collapse
Happy to go totally stock. Ive unlocked my bootloader again this morning. How would I flash the zip file you have directed me to download. Apologies for my newbie/dangerous ignorance...
phupton said:
Happy to go totally stock. Ive unlocked my bootloader again this morning. How would I flash the zip file you have directed me to download. Apologies for my newbie/dangerous ignorance...
Click to expand...
Click to collapse
by flashing it in custom recovery (CWM or TWRP), just like any custom ROM.
nkk71 said:
by flashing it in custom recovery (CWM or TWRP), just like any custom ROM.
Click to expand...
Click to collapse
My phone will only boot to fastboot at the moment. ITs partially bricked. Any pointers on how to get CWM installed?
phupton said:
My phone will only boot to fastboot at the moment. ITs partially bricked. Any pointers on how to get CWM installed?
Click to expand...
Click to collapse
If you have unlocked bootloaders then download twrp or cwm and rename to recovery put the file in the fastboot folder.
Then type fastboot flash recovery recovery.img
this will flash the custom recovery.
http://forum.xda-developers.com/showthread.php?t=2173863 - CWM
http://forum.xda-developers.com/showthread.php?t=2247900 - TWRP
khandelwalsiddharth said:
If you have unlocked bootloaders then download twrp or cwm and rename to recovery put the file in the fastboot folder.
Then type fastboot flash recovery recovery.img
this will flash the custom recovery.
http://forum.xda-developers.com/showthread.php?t=2173863 - CWM
http://forum.xda-developers.com/showthread.php?t=2247900 - TWRP
Click to expand...
Click to collapse
Thanks. I should be able to get a custom recovery sorted pretty quick. Can you just give me a bit of a pointer on the flashing of the stock rom mentioned earleir
phupton said:
Looking at the fastboot screen I can see that my OS is 2.24.401.8
hboot is 1.54.0000
Please, any pointers to get a stock OS installed and my device booting again.
Click to expand...
Click to collapse
bro hboot 1.54 isn't supported for RUU. u have 2 downgrade 2 hboot 1.44 to use the RUU. follow nkk71's post on returning to stock
phupton said:
Thanks. I should be able to get a custom recovery sorted pretty quick. Can you just give me a bit of a pointer on the flashing of the stock rom mentioned earleir
Click to expand...
Click to collapse
Do one thing install a custom rom like ARHD etc. and then S-off your phone using rumrunner.
This is going to be one of those jobs that just fails and all I end up with is a bricked phone.
I am a mac user and was using a windows XP VM to communicate with me phone using fast boot... When I try to push a recovery image XP fails badly and reboots...
I can't boot camp my mac because I'm running without a CD drive and boot camp needs a CD drive before installation.
Any tips on how to get my phone sorted using a mac?
phupton said:
This is going to be one of those jobs that just fails and all I end up with is a bricked phone.
I am a mac user and was using a windows XP VM to communicate with me phone using fast boot... When I try to push a recovery image XP fails badly and reboots...
I can't boot camp my mac because I'm running without a CD drive and boot camp needs a CD drive before installation.
Any tips on how to get my phone sorted using a mac?
Click to expand...
Click to collapse
1- just use mac versions of fastboot & adb, i believe you can find them here: http://forum.xda-developers.com/showthread.php?t=2365506
(or google for them)
2- do you care about having your phone "out-of-the-box"? that entails much more work.Can you live with an UNLOCKED or RELOCKED bootloader, and possibly the TAMPERED sign?
3- if you don't care about ^^ (2), then just use the Guru Reset ROM, i linked before.
get adb and fastboot working on mac, then in bootloader/FASTBOOT USB:
fastboot flash recovery <name of recovery>.img
fastboot erase cache
fastboot reboot-bootloader
-> enter recovery
adb push <name of guru>.zip /data/media/0/
then in recovery choose "install" and select the Guru Reset ROM.
Ok so i reloaded the recovery image. Rebooted and hey presto Cyanogenmod 10.2 loaded again. Phone is now working BUT I would still like to go back to stock.
With that in mind I followed your instructions above and tried to load the Guru zip on to the SDCARD. The ADB process finishes and it says its copied the file over but I can never seem to find it whe i load the recovery and try to install from a zip file.
Questions. Am I right in thinking I can continue to load the Guru zip to attempt to get back to stock?
What am i doing wrong?
phupton said:
Ok so i reloaded the recovery image. Rebooted and hey presto Cyanogenmod 10.2 loaded again. Phone is now working BUT I would still like to go back to stock.
With that in mind I followed your instructions above and tried to load the Guru zip on to the SDCARD. The ADB process finishes and it says its copied the file over but I can never seem to find it whe i load the recovery and try to install from a zip file.
Questions. Am I right in thinking I can continue to load the Guru zip to attempt to get back to stock?
What am i doing wrong?
Click to expand...
Click to collapse
if your phone is booting up again
just copy the guru.zip to the phone storage from your mac
no need to "push" if your phone is booting up
To confirm, I am now copying the zip over.
Is there a chance of me bricking the phone again or will the Guru zip return the phone to stock and allow OTA updates?
phupton said:
To confirm, I am now copying the zip over.
Is there a chance of me bricking the phone again or will the Guru zip return the phone to stock and allow OTA updates?
Click to expand...
Click to collapse
yeah the Guru reset was designed to put the phone back to stock
it uses an Aroma installer .. choose Stock Recovery to be able to receive OTA in the future. but you won't be able to flash any custom roms or Root with the stock recovery
that seemed to do the trick. phone is back stock.
after initial setup t imediately downloaded and installed a small update. rebooted and then asked to download another 4.3 675mb big update. that one seemed to reset the devce to new again. after setup the 2nd time i can see it didnt work as the phone was as if i had just completed the guru install...
thoughts?
phupton said:
that seemed to do the trick. phone is back stock.
after initial setup t imediately downloaded and installed a small update. rebooted and then asked to download another 4.3 675mb big update. that one seemed to reset the devce to new again. after setup the 2nd time i can see it didnt work as the phone was as if i had just completed the guru install...
thoughts?
Click to expand...
Click to collapse
did the second update give an error or just didn't take ?
Hello.
I'm having an issue with my phone and I really can't fix it. I've tried for a few days before posting here.
I have CWM installed, but I first had TWRP. It's an HTC by Telus, Canada.
So, the problems:
I can't factory reset since it will give me errors like "error mounting /data" and "error mounting /sdcard/.android_secure"
I can't even acccess the sdcard, it will say "E: Can't mount /sdcard" so I definitely cant install a new ROM
I had installed CM 11 but it will never go pass the logo (I'm assuming it can't since sdcard is unavailable)
I tried installing via ADB sideload and I get "* failed to write data 'protocol fault (no status)' *"
I'm desperate I have no idea what to do and where to start.
Thanks
P.S. : I don't remember how to output all the information like version-main and stuff, I'd do it with pleasure if someone points it out. And it's S-ON
Ok, issue fixed! A proper RUU worked fine to reset my phone, all good! Still don't know what was the initial problem but now that it's solved I'm happy
the command to post your output is fastboot getvar all, remove serial and imei before posting.
after you have done that, stay in fastboot mode and type fastboot erase cache
the flash TWRP 2.6.3.3 and see if you can get into it.
once in goto - wipe - advanced wipe and select everything in the list, including internal memory and format the whole phone.
you will then have to push a rom of your choice and flash it.
Seanie280672 said:
the command to post your output is fastboot getvar all, remove serial and imei before posting.
after you have done that, stay in fastboot mode and type fastboot erase cache
the flash TWRP 2.6.3.3 and see if you can get into it.
once in goto - wipe - advanced wipe and select everything in the list, including internal memory and format the whole phone.
you will then have to push a rom of your choice and flash it.
Click to expand...
Click to collapse
Output:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.661.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: TELUS001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4093mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.040s
Erasing cache:
******** Did you mean to fastboot format this partition?
erasing 'cache'...
OKAY [ 0.065s]
finished. total time: 0.066s
Installing recovery:
target reported max download size of 1514139648 bytes
sending 'recovery' (10854 KB)...
OKAY [ 1.692s]
writing 'recovery'...
OKAY [ 0.752s]
finished. total time: 2.445s
But it's stuck before getting to recovery. "Entering recovery" won't go away...
ok, you could try this, relock bootloader and run the official RUU download here:
http://www.htc1guru.com/dld/ruu_m7_ul_k44_sense55_mr_telus_wwe_4-19-661-8_r_radio_4t-24-3218-09_10-26-1718-01l_release_351500_signed_2-exe/
It doesn't work. windows will give me an error and ask to debug the RUU. Not sure if that's my computer or the executable...
memyselfand06 said:
It doesn't work. windows will give me an error and ask to debug the RUU. Not sure if that's my computer or the executable...
Click to expand...
Click to collapse
can you check the file size of that RUU you downloaded please, in properties on your PC, it should be 1.5gb, ive just tried downloading it myself and it says completed but its only 148mb, when I tried to run it I go a similar error to what you are getting, just means there is a problem with the site at the moment and will be fixed shortly, you'll have to wait until then to grab the file, just keep trying until you get the full file size.
Last time this happened to this site a few weeks back, he said some hacker in Canada was sending a back door reset to his site every few minutes.
---------- Post added at 06:16 PM ---------- Previous post was at 06:09 PM ----------
found another download site with the same file that you can try and grab it from instead: http://androidruu.com/getdownload.php?file=M7/RUU_M7_UL_K44_SENSE55_MR_TELUS_WWE_4.19.661.8_R_Radio_4T.24.3218.09_10.26.1718.01L_release_351500_signed_2.exe
Hmm. Mine has 750mb. I guess it's still no good.
But I still can't get into recovery ..
memyselfand06 said:
Hmm. Mine has 750mb. I guess it's still no good.
But I still can't get into recovery ..
Click to expand...
Click to collapse
you wont need recovery to flash an RUU, just relock your bootloader, plug your phone into the computer and run the RUU, and no that file is no good, that's why you are getting the error, although it says its complete, you only have 50% of it, delete it and try the other site linked below, androidruu.com
http://androidruu.com/getdownload.p...09_10.26.1718.01L_release_351500_signed_2.exe
Seanie280672 said:
you wont need recovery to flash an RUU, just relock your bootloader, plug your phone into the computer and run the RUU, and no that file is no good, that's why you are getting the error, although it says its complete, you only have 50% of it, delete it and try the other site linked below, androidruu.com
http://androidruu.com/getdownload.p...09_10.26.1718.01L_release_351500_signed_2.exe
Click to expand...
Click to collapse
Ok, thanks, I'll redownload the file. Will it restore stock recovery as well? I got all this mess because I wanted to install an OTA update for HTC sense 6.0 and everything that came with it and I think I need stock recovery in order to install official updates...
memyselfand06 said:
Ok, thanks, I'll redownload the file. Will it restore stock recovery as well? I got all this mess because I wanted to install an OTA update for HTC sense 6.0 and everything that came with it and I think I need stock recovery in order to install official updates...
Click to expand...
Click to collapse
It should put you back to full stock
Great! I'll let you know what's the result
Thanks for your time
memyselfand06 said:
Great! I'll let you know what's the result
Thanks for your time
Click to expand...
Click to collapse
install TWRP
Try format data partition first it will remove mount data error
from HTC One
yatindroid said:
install TWRP
Try format data partition first it will remove mount data error
from HTC One
Click to expand...
Click to collapse
But I can't get into recovery, how am I suppose to do that?
memyselfand06 said:
But I can't get into recovery, how am I suppose to do that?
Click to expand...
Click to collapse
flash stock recovery
Boot loader » factory data reset
Sometimes it also clear issues
from HTC One
yatindroid said:
flash stock recovery
Boot loader » factory data reset
Sometimes it also clear issues
from HTC One
Click to expand...
Click to collapse
but I cant find a stock recovery either. I'm still waiting for the RUU to download and hopefully it will fix everything
memyselfand06 said:
but I cant find a stock recovery either. I'm still waiting for the RUU to download and hopefully it will fix everything
Click to expand...
Click to collapse
You can use Rom.zip from ruu
When you run ruu see temp folder in Windows it contains some long number named folder that contains rom.zip
flash that zip in fastboot
from HTC One
Hey guys, this is my first thread in XDA have quite some experience with samsung android but pretty new with HTC.
So, I dropped my HTC one day and it got stuck in a bootloop after few days. I havent change anything, stock, unrooted, never flashed any ROM into it, etc. I tried flashing RUU into it using fastboot command but it ddnt work since its still S-on.
Im working on mac as a platform and i dont think this is a major issue?
I am able to access recovery mode and fastboot mode, but wasnt able to push any file into it since debugging mode is off before the bootloop. ./adb devices command wont detect the phone. I also have HTC Sync installed on my mac but again, it wont detect the phone.
I also printed the getvar all result here:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.11.631.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT36xxxxxxx7
(bootloader) imei: 3544xxxxxx23453
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: ROGER001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3876mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e47fb74b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
also attached is screenshot of bootloader mode.
please help. my phone have been like this for 2-3 weeks now
RoyalChalksHere said:
Hey guys, this is my first thread in XDA have quite some experience with samsung android but pretty new with HTC.
So, I dropped my HTC one day and it got stuck in a bootloop after few days. I havent change anything, stock, unrooted, never flashed any ROM into it, etc. I tried flashing RUU into it using fastboot command but it ddnt work since its still S-on.
Im working on mac as a platform and i dont think this is a major issue?
I am able to access recovery mode and fastboot mode, but wasnt able to push any file into it since debugging mode is off before the bootloop. ./adb devices command wont detect the phone. I also have HTC Sync installed on my mac but again, it wont detect the phone.
I also printed the getvar all result here:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.11.631.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT36xxxxxxx7
(bootloader) imei: 3544xxxxxx23453
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: ROGER001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3876mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e47fb74b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
also attached is screenshot of bootloader mode.
please help. my phone have been like this for 2-3 weeks now
Click to expand...
Click to collapse
First of all is there any warranty left on the device. If there is it would be a good idea to take advantage of that before tampering with it. Especially as this happened after you dropped the phone. So there's a good chance it's a hardware problem.
I assume you've tried to factory reset from stock recovery?
If there's no warranty your best option is to unlock the bootloader. This will allow you to flash a Custom recovery. Then you can push a Rom to the phone, as adb will work in a custom recovery weather debugging is enabled or not.
I recommend TWRP 2.6.3.3 recovery it's not the latest twrp but is the most stable.
Danny201281 said:
First of all is there any warranty left on the device. If there is it would be a good idea to take advantage of that before tampering with it. Especially as this happened after you dropped the phone. So there's a good chance it's a hardware problem.
I assume you've tried to factory reset from stock recovery?
If there's no warranty your best option is to unlock the bootloader. This will allow you to flash a Custom recovery. Then you can push a Rom to the phone, as adb will work in a custom recovery weather debugging is enabled or not.
I recommend TWRP 2.6.3.3 recovery it's not the latest twrp but is the most stable.
Click to expand...
Click to collapse
yes ive tried factory reset too. I bought it in september 2013 from someone else and i think i lost the receipt, so i dont think I can take advantage of the warrant. i will keep looking though. is there any good link to unlock the bootloader?
RoyalChalksHere said:
yes ive tried factory reset too. I bought it in september 2013 from someone else and i think i lost the receipt, so i dont think I can take advantage of the warrant. i will keep looking though. is there any good link to unlock the bootloader?
Click to expand...
Click to collapse
www.htcdev.com to unlock the bootloader. You'll need to register an account. Then go to the Unlock my Bootloader section. Follow the instructions to get the Unlock code
I tried resetting rooted device... it rebooted in trwp... so i wiped it from there
when i reboot it doesn't move from the htc logo screen
when i try to power off, the soft keys blink and thats it.. nothing more.. i don't know what else to
@CallMe_Y_C said:
I tried resetting rooted device... it rebooted in trwp... so i wiped it from there
when i reboot it doesn't move from the htc logo screen
when i try to power off, the soft keys blink and thats it.. nothing more.. i don't know what else to
Click to expand...
Click to collapse
When you say you wiped it in twrp, did you Factory Reset or did you Format Data?
If you used Format Data then you wiped your entire device including the installed Rom. You should be able to force the device to power of by holding the power button for 60secs.
Then power on while holding volume down to get to the bootloader. Then you can boot to recovery and push a Rom with adb. :good:
awesome, thanks @Danny201281 i got TWRP to work on my HTC one. now on to custom rom. Which one is the best for HTC One? Any suggestion anyone? =)
RoyalChalksHere said:
awesome, thanks @Danny201281 i got TWRP to work on my HTC one. now on to custom rom. Which one is the best for HTC One? Any suggestion anyone? =)
Click to expand...
Click to collapse
Hehe I will always recommend Android Revolution HD because it's my favorite
But honestly is depends what you want from a Rom. ARHD is close to stock. It's very stable with no real bugs. It also has xposed support so you can make your own modifications. For me this gives a more personal experience.
MaximusHD is also a very popular close to stock Rom.
Or then you have the likes of Viper Rom or insertcoin which are more heavily modified.
But either way you look at it ARHD is a good place to start. It should be flashed with TWRP 2.6.3.3 TO avoid problems installing as most newer versions of TWRP don't seem to agree with the Aroma installer the Rom is packaged with :good:
Danny201281 said:
Hehe I will always recommend Android Revolution HD because it's my favorite
But honestly is depends what you want from a Rom. ARHD is close to stock. It's very stable with no real bugs. It also has xposed support so you can make your own modifications. For me this gives a more personal experience.
MaximusHD is also a very popular close to stock Rom.
Or then you have the likes of Viper Rom or insertcoin which are more heavily modified.
But either way you look at it ARHD is a good place to start. It should be flashed with TWRP 2.6.3.3 TO avoid problems installing as most newer versions of TWRP don't seem to agree with the Aroma installer the Rom is packaged with :good:
Click to expand...
Click to collapse
hey. ok so i downloaded AICP and installed them through TWRP and everything works fine. BUT, when i got to my homepage and use the phone for a couple of minutes, it restarted on its own. Any idea on why this is happening?
RoyalChalksHere said:
hey. ok so i downloaded AICP and installed them through TWRP and everything works fine. BUT, when i got to my homepage and use the phone for a couple of minutes, it restarted on its own. Any idea on why this is happening?
Click to expand...
Click to collapse
Go to Setting>About>Phone Identity
Is your IMEI displayed properly there?
Also check Setting>About>Software Information>More
Is your Baseband displayed correctly here?
Danny201281 said:
Go to Setting>About>Phone Identity
Is your IMEI displayed properly there?
Also check Setting>About>Software Information>More
Is your Baseband displayed correctly here?
Click to expand...
Click to collapse
oh they are both unknown. what should I do?
RoyalChalksHere said:
oh they are both unknown. what should I do?
Click to expand...
Click to collapse
9 times out of 10 this is a Hardware problem. You can try and flash a Firmware package and after that the only thing left Is to s-off and try an ruu. But if firmware doesn't fix it an ruu probably won't either.
As the phone had been dropped there's a high chance it's a hardware problem.
But I'll see if I can find a firmware package you can try. It's worth a go before writing it off.
Danny201281 said:
9 times out of 10 this is a Hardware problem. You can try and flash a Firmware package and after that the only thing left Is to s-off and try an ruu. But if firmware doesn't fix it an ruu probably won't either.
As the phone had been dropped there's a high chance it's a hardware problem.
But I'll see if I can find a firmware package you can try. It's worth a go before writing it off.
Click to expand...
Click to collapse
oh. so i guess warranty is the only way to go. or new phone. =( i even lost pictures from internal storage.
I couldn't find a firmware package but I did find this OTA. It contains the firmware we need. Download it and open the zip on your pc. Extract the firmware.zip and put the firmware.zip in your fastboot folder.
http://www.htc1guru.com/dld/ota_m7_...-19-631-9_release_372926h4tumwerl14wrs0u-zip/
Reboot the phone to the bootloader and Connect fastbootusb. Now open your Fastboot command line and type
Code:
fastboot erase cache
fastboot oem lock
fastboot reboot-bootloader
Code:
fastboot oem rebootRUU
< --- case sensitive. ---^^^
The phone will reboot to a black screen with a Silver HTC LOGO. This is RUU mode. Now we're going to flash the firmware.
Code:
fastboot flash zip firmware.zip
The first flash will be short. It's just a preupdate preparing the hboot for the new firmware. So we need to do the same command again.
Code:
fastboot flash zip firmware.zip
The second flash will take a little longer and this time it will flash the full firmware. The progress bar on the phone screen will not reach 100% this is normal as long as the command window has completed its output the flash is done.
Code:
fastboot reboot-bootloader
Now you will need to unlock the bootloader again with your Unlock_code.bin
Flash TWRP and Flash your Rom again before the phone will boot. Then reboot the phone. :fingers-crossed:
If that doesn't do it Warranty is a possibility but you will need s-off to remove the signs the phone was tampered with.
---------- Post added at 10:01 AM ---------- Previous post was at 09:59 AM ----------
Yeah unfortunately Unlocking the Bootloader Wipes the device.
Danny201281 said:
I couldn't find a firmware package but I did find this OTA. It contains the firmware we need. Download it and open the zip on your pc. Extract the firmware.zip and put the firmware.zip in your fastboot folder.
http://www.htc1guru.com/dld/ota_m7_...-19-631-9_release_372926h4tumwerl14wrs0u-zip/
Reboot the phone to the bootloader and Connect fastbootusb. Now open your Fastboot command line and type
Code:
fastboot erase cache
fastboot oem lock
fastboot reboot-bootloader
Code:
fastboot oem rebootRUU
< --- case sensitive. ---^^^
The phone will reboot to a black screen with a Silver HTC LOGO. This is RUU mode. Now we're going to flash the firmware.
Code:
fastboot flash zip firmware.zip
The first flash will be short. It's just a preupdate preparing the hboot for the new firmware. So we need to do the same command again.
Code:
fastboot flash zip firmware.zip
The second flash will take a little longer and this time it will flash the full firmware. The progress bar on the phone screen will not reach 100% this is normal as long as the command window has completed its output the flash is done.
Code:
fastboot reboot-bootloader
Now you will need to unlock the bootloader again with your Unlock_code.bin
Flash TWRP and Flash your Rom again before the phone will boot. Then reboot the phone. :fingers-crossed:
If that doesn't do it Warranty is a possibility but you will need s-off to remove the signs the phone was tampered with.
---------- Post added at 10:01 AM ---------- Previous post was at 09:59 AM ----------
Yeah unfortunately Unlocking the Bootloader Wipes the device.
Click to expand...
Click to collapse
so, it failed and shows this:
Mustafas-MacBook-Airlatform-tools mustafafarhanarifin$ ./fastboot flash zip OTA_M7_UL_K44_SENSE60_MR_Rogers_WWE_5.11.631.8_R-4.19.631.9_release_372926h4tumwerl14wrs0u.zip
target reported max download size of 1514139648 bytes
sending 'zip' (720552 KB)...
OKAY [ 28.648s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 111.120s
RoyalChalksHere said:
so, it failed and shows this:
Mustafas-MacBook-Airlatform-tools mustafafarhanarifin$ ./fastboot flash zip OTA_M7_UL_K44_SENSE60_MR_Rogers_WWE_5.11.631.8_R-4.19.631.9_release_372926h4tumwerl14wrs0u.zip
target reported max download size of 1514139648 bytes
sending 'zip' (720552 KB)...
OKAY [ 28.648s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 111.120s
Click to expand...
Click to collapse
You flashed the wrong zip. The firmware zip is inside the OTA
Open the OTA_M7_UL_K44_SENSE60_MR_Rogers_WWE_5.11.631.8_R-4.19.631.9_release_372926h4tumwerl14wrs0u.zip On your pc inside it is a firmware.zip extract the firmware.zip and flash it with the previous procedure
Danny201281 said:
I couldn't find a firmware package but I did find this OTA. It contains the firmware we need. Download it and open the zip on your pc. Extract the firmware.zip and put the firmware.zip in your fastboot folder.
http://www.htc1guru.com/dld/ota_m7_...-19-631-9_release_372926h4tumwerl14wrs0u-zip/
Reboot the phone to the bootloader and Connect fastbootusb. Now open your Fastboot command line and type
Code:
fastboot erase cache
fastboot oem lock
fastboot reboot-bootloader
Code:
fastboot oem rebootRUU
< --- case sensitive. ---^^^
The phone will reboot to a black screen with a Silver HTC LOGO. This is RUU mode. Now we're going to flash the firmware.
Code:
fastboot flash zip firmware.zip
The first flash will be short. It's just a preupdate preparing the hboot for the new firmware. So we need to do the same command again.
Code:
fastboot flash zip firmware.zip
The second flash will take a little longer and this time it will flash the full firmware. The progress bar on the phone screen will not reach 100% this is normal as long as the command window has completed its output the flash is done.
Code:
fastboot reboot-bootloader
Now you will need to unlock the bootloader again with your Unlock_code.bin
Flash TWRP and Flash your Rom again before the phone will boot. Then reboot the phone. :fingers-crossed:
If that doesn't do it Warranty is a possibility but you will need s-off to remove the signs the phone was tampered with.
---------- Post added at 10:01 AM ---------- Previous post was at 09:59 AM ----------
Yeah unfortunately Unlocking the Bootloader Wipes the device.
Click to expand...
Click to collapse
Danny201281 said:
You flashed the wrong zip. The firmware zip is inside the OTA
Open the OTA_M7_UL_K44_SENSE60_MR_Rogers_WWE_5.11.631.8_R-4.19.631.9_release_372926h4tumwerl14wrs0u.zip On your pc inside it is a firmware.zip extract the firmware.zip and flash it with the previous procedure
Click to expand...
Click to collapse
youre amazing man. looks fine so far. baseband and IMEI is registered. im currently on android lollipop, and couldnt find any suitable gapps file. do you happen to know?
ok, so I shut down the phone to get back into fastboot mode with the button combo, but now it is not even turning on. black screen, not even charging. wtf.
Danny201281 said:
When you say you wiped it in twrp, did you Factory Reset or did you Format Data?
If you used Format Data then you wiped your entire device including the installed Rom. You should be able to force the device to power of by holding the power button for 60secs.
Then power on while holding volume down to get to the bootloader. Then you can boot to recovery and push a Rom with adb. :good:
Click to expand...
Click to collapse
i think i did both
i will try that after i get some charge on it
battery died last night
---------- Post added at 12:49 PM ---------- Previous post was at 12:23 PM ----------
@CallMe_Y_C said:
i think i did both
i will try that after i get some charge on it
battery died last night
Click to expand...
Click to collapse
can i get a suggested rom or supm to follow?
steps
thanks
RoyalChalksHere said:
youre amazing man. looks fine so far. baseband and IMEI is registered. im currently on android lollipop, and couldnt find any suitable gapps file. do you happen to know?
Click to expand...
Click to collapse
RoyalChalksHere said:
ok, so I shut down the phone to get back into fastboot mode with the button combo, but now it is not even turning on. black screen, not even charging. wtf.
Click to expand...
Click to collapse
Sorry man I had to get some sleep, So it was looking good for while then
What happened exactly? You flashed the firmware and Rom and all was ok. Then you just power off to go to bootloader and it never came back on? Did you flash anything in between that or that was it? You say you had a lollipop Rom can you provide a link to it please?
Is the device detected when you connect it to your pc? Does it show on device manager, maybe as Unknown device or QHSUSB_DLOAD?
---------- Post added at 04:09 PM ---------- Previous post was at 03:59 PM ----------
@CallMe_Y_C said:
i think i did both
i will try that after i get some charge on it
battery died last night
---------- Post added at 12:49 PM ---------- Previous post was at 12:23 PM ----------
can i get a suggested rom or supm to follow?
steps
thanks
Click to expand...
Click to collapse
I'd be happy to make a suggestion but can you post your getvar all? Not all roms are compatible with all devices.
It's kind of important to know what I'm recommending a Rom for
hello guys, i got htc one m7, today, i rooted the phone and installed the twrp recovery, then rebooted to system and was working fine until i installed the modified rom "NuSenSeven", it successfully installed the rom but when i restarted the phone it stuck on boot animation and then rebooted and entered the recovery, i tried to wipe cache, data, factory reset, reboot, it still didn't worked, i installed the rom again with the different settings, and it still isn't working and unfortunately when i connect phone to computer, it cannot be detected. i have 2 laptops and it was working on both of them before it got stuck. Can anyone help me to fix it?
Thanks in advance.
TAT1SHA said:
hello guys, i got htc one m7, today, i rooted the phone and installed the twrp recovery, then rebooted to system and was working fine until i installed the modified rom "NuSenSeven", it successfully installed the rom but when i restarted the phone it stuck on boot animation and then rebooted and entered the recovery, i tried to wipe cache, data, factory reset, reboot, it still didn't worked, i installed the rom again with the different settings, and it still isn't working and unfortunately when i connect phone to computer, it cannot be detected. i have 2 laptops and it was working on both of them before it got stuck. Can anyone help me to fix it?
Thanks in advance.
Click to expand...
Click to collapse
What recovery version do you have?
donkeykong1 said:
What recovery version do you have?
Click to expand...
Click to collapse
I used the one from all in-one toolkit, i have no idea what version it is. also i tried to connect otb but it doesnt lets me use the otg neither. I wish it had a sd-card slot, it would escalate it easily.
TAT1SHA said:
I used the one from all in-one toolkit, i have no idea what version it is. also i tried to connect otb but it doesnt lets me use the otg neither. I wish it had a sd-card slot, it would escalate it easily.
Click to expand...
Click to collapse
Go into recovery and at the top of the screen is version number
donkeykong1 said:
Go into recovery and at the top of the screen is version number
Click to expand...
Click to collapse
TWRP v2.7.1.0a
TAT1SHA said:
TWRP v2.7.1.0a
Click to expand...
Click to collapse
I think your recovery is old. Find a newer version for your phone and flash it via recovery. You are on T-mobile, right?
Almost like something happens.
With HTC PN07200 (searching the model is a HTC ONE M7). I wanted to put a different rom.
The equipe was with the Bootloader "Locked", "S-Off" and "1111 user" (by what I read is superuser).
With the tools unlock "One_All-In-One_Kit_v3.1" or other downloadable for this model ...
Since fastboot command console and unlockcode .... I got to the "Unlocked" STEP 1 OK !!!
As recovery was already the "TWRP 2.5.0.0" try putting seven different ROMs without success.
Android_Revolution_HD-One_84.0.zip
Android_Revolution_HD-One_92.0_4a9d05.zip
Guru_Reset_M7_3.22.1540.1.zip
HTC_One_-_MaximusHD_53.0.0.zip
NuSenSeveN-LP-m7-gsm_v4.02_050715.zip
One_M7_7.15.401.1_stock_system_dump.zip
Sprint_HTC_One_m7wls_3_04_651_2_RUU.zip
The installation within TWRP is done without problems, you do not give error messages. But when asked reboot was presented with all of the 3 problem I describe them ...
or catch, white screen with HTC logo with a small and short vibration, black screen 3 seconds and again the white screen with HTC logo with a small and short vibration (bootloop)
or white screen with HTC logo with a small and short vibration and screen goes black.
or log in directly and fast recovery.
I tried without success to achieve other recovery programs from loading them into recovery Fastboot (fastboot flash recovery /// xxx.img fastboot erase cache)
TWRP 2.5.0.0.img
TWRP 2.7.0.0.img
TWRP 2.8.7.0.img
OpenRecovery-TWRP-2.5.0.0-m7wls.img
OpenRecovery-TWRP-2.7.0.0-m7.img
This team does not have external SD card, so did everything from internal memory, and also tried to OTG cable pendrive, without success.
donkeykong1 said:
I think your recovery is old. Find a newer version for your phone and flash it via recovery. You are on T-mobile, right?
Click to expand...
Click to collapse
I cant connect the phone to pc, its undetectable on all 3 laptops i got, i downloaded and installed about 3 different HTC drivers but it still isn't detected, i have bootloader unlocked and cid 1111, and S-off just in case if you might need to know that too
slash22toly said:
Almost like something happens.
With HTC PN07200 (searching the model is a HTC ONE M7)
Click to expand...
Click to collapse
PN0720000 is a Sprint CDMA HTC One.
I wanted to put a different rom.
Click to expand...
Click to collapse
So you need to use roms that are compatible with the Sprint HTC One (CDMA)
The equipe was with the Bootloader "Locked", "S-Off" and "1111 user" (by what I read is superuser).
Click to expand...
Click to collapse
11111111 is SuperCID not SuperUser, these are 2 different things. SuperCID allows the phone to bypass the CID check when flashing a RUU that was not made for your phone. Pretty useless for the Sprint M7 imo since you can only flash Sprint RUU because others ruu are not compatible with Sprint HTC one but anyway its ok to have superCID, you can keep it like that.
With the tools unlock "One_All-In-One_Kit_v3.1" or other downloadable for this model ...
Since fastboot command console and unlockcode .... I got to the "Unlocked" STEP 1 OK !!!
Click to expand...
Click to collapse
You might to use adb and fastboot directly from a command window using the latest android sdk tools. These toolkits are not up-to-date and not ideal when having issues. The other major issue with this toolkit is that its for the GSM M7 not for the Sprint variant.
As recovery was already the "TWRP 2.5.0.0" try putting seven different ROMs without success.
Android_Revolution_HD-One_84.0.zip ---> Its a rom for GSM htc one M7 (M7_UL or M7_U). You have a sprint M7 (M7WLS)
Android_Revolution_HD-One_92.0_4a9d05.zip ---> Its a rom for GSM htc one M7 (M7_UL or M7_U). You have a sprint M7 (M7WLS)
Guru_Reset_M7_3.22.1540.1.zip ---> Its a rom for GSM htc one M7 Developer edition PN0712000 not PN0720000
HTC_One_-_MaximusHD_53.0.0.zip ---> For GSM
NuSenSeveN-LP-m7-gsm_v4.02_050715.zip ---> For GSM
One_M7_7.15.401.1_stock_system_dump.zip ---> For GSM
Sprint_HTC_One_m7wls_3_04_651_2_RUU.zip ---> Its an RUU for Sprint HTC one. RUU are not flashed using custom recovery, its flashed using fastboot.
Click to expand...
Click to collapse
The installation within TWRP is done without problems, you do not give error messages. But when asked reboot was presented with all of the 3 problem I describe them ...
or catch, white screen with HTC logo with a small and short vibration, black screen 3 seconds and again the white screen with HTC logo with a small and short vibration (bootloop)
or white screen with HTC logo with a small and short vibration and screen goes black.
or log in directly and fast recovery.
Click to expand...
Click to collapse
All these errors are caused by flashing a GSM rom on a CDMA phone.
I tried without success to achieve other recovery programs from loading them into recovery Fastboot (fastboot flash recovery /// xxx.img fastboot erase cache)
TWRP 2.5.0.0.img
TWRP 2.7.0.0.img
TWRP 2.8.7.0.img
OpenRecovery-TWRP-2.5.0.0-m7wls.img
OpenRecovery-TWRP-2.7.0.0-m7.img
Click to expand...
Click to collapse
You can only flash recoveries that are compatible with Sprint HTC One M7, in that above list, only that one ending with "m7wls.img" should work. To flash a recovery you have to use:
Code:
fastboot flash recovery name_of_file.img
fastboot erase cache
fastboot reboot-bootloader
Better to post the output of "fastboot getvar all" so we can know everything about your phone, stop the confusion and direct you to a rom/recovery and instructions that will work with your phone. When posting the output of "fastboot getvar all", censor your IMEI, MEID and SERIALNO, you don't want to post these values on the forums. Other values will help determining what you can flash and how.
alray said:
PN0720000 is a Sprint CDMA HTC One.
So you need to use roms that are compatible with the Sprint HTC One (CDMA)
Click to expand...
Click to collapse
This little detail much explains my problem. Thanks
alray said:
Better to post the output of "fastboot getvar all" so we can know everything about your phone, stop the confusion and direct you to a rom/recovery and instructions that will work with your phone. When posting the output of "fastboot getvar all", censor your IMEI, MEID and SERIALNO, you don't want to post these values on the forums. Other values will help determining what you can flash and how.
Click to expand...
Click to collapse
Here is the data...
Code:
E:\ROMs\HTC One m7\fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.06.651.9
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: XXXXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXXXX
(bootloader) meid: XXXXXXXXXXXXXX
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4056mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s
alray said:
You might to use adb and fastboot directly from a command window using the latest android sdk tools. These toolkits are not up-to-date and not ideal when having issues. The other major issue with this toolkit is that its for the GSM M7 not for the Sprint variant.
Click to expand...
Click to collapse
In the directory, I use a command console, and write fastboot... etc.
Code:
Directorio de E:\ROMs\HTC One m7\One_All-In-One_Kit_v3.1\HTC\Data
09/10/2015 10:13 <DIR> .
09/10/2015 10:13 <DIR> ..
19/08/2012 01:00 846.848 aapt.exe
19/08/2012 01:00 191.488 adb.exe
19/08/2012 01:00 96.256 AdbWinApi.dll
19/08/2012 01:00 60.928 AdbWinUsbApi.dll
20/05/2013 04:03 1.151.546 APKBIT.exe
20/11/2010 22:23 345.088 cmd.exe
05/10/2015 17:19 1.345 Data - Acceso directo.lnk
19/08/2012 01:00 140.800 fastboot.exe
01/04/2012 00:53 186 mainver_fix.bat
19/02/2012 01:24 656.708 misctool
19/02/2012 08:41 4.526 misctool.c
07/10/2015 14:50 1.288.121.395 One.zip
28/07/2013 13:43 <DIR> Recoveries
07/10/2015 14:40 1.204.676.279 Sprint_HTC_One_m7wls_3_04_651_2_RUU.zip
28/07/2013 13:42 <DIR> SU
06/10/2015 10:48 1.360.737 Superuser.zip
14 archivos 2.497.654.130 bytes
4 dirs 60.303.917.056 bytes libres
alray said:
You can only flash recoveries that are compatible with Sprint HTC One M7, in that above list, only that one ending with "m7wls.img" should work. To flash a recovery you have to use:
Code:
fastboot flash recovery name_of_file.img
fastboot erase cache
fastboot reboot-bootloader
Click to expand...
Click to collapse
Ok. i will use that
alray said:
Sprint_HTC_One_m7wls_3_04_651_2_RUU.zip ---> Its an RUU for Sprint HTC one. RUU are not flashed using custom recovery, its flashed using fastboot.
Click to expand...
Click to collapse
So, I don´t need to use a twpr to flash the phone?. but from fastboot, how can i flash a .ZIP file? I thought i needed a .IMG
------------------------------------------------------------------------------------
I just installed ok the OpenRecovery-TWRP-2.5.0.0-m7wls.img. it´s running ok
I unzipped file Sprint_HTC_One_m7wls_3_04_651_2_RUU.zip ....
Code:
adb.exe
AdbWinApi.dll
android-info.txt
ARUGlobal.dll
ARUWizard.exe
ARUWizard.ini
ARUWizard_ARA.lng
ARUWizard_BrPt.lng
ARUWizard_Cze.lng
ARUWizard_Dan.lng
ARUWizard_Dut.lng
ARUWizard_Eng.lng
ARUWizard_EuPt.lng
ARUWizard_EuSpa.lng
ARUWizard_FIN.lng
ARUWizard_Fra.lng
ARUWizard_Ger.lng
ARUWizard_Grk.lng
ARUWizard_Ita.lng
ARUWizard_Jap.lng
ARUWizard_Nor.lng
ARUWizard_Pol.lng
ARUWizard_Rus.lng
ARUWizard_SC.lng
ARUWizard_Svk.lng
ARUWizard_TC.lng
ARUWizard_Thai.lng
ARUWizard_TRK.lng
default.pal
DIFxData.ini
DMData00.DAT
DMData01.DAT
DMData02.DAT
DMData03.DAT
DMData04.DAT
DMData05.DAT
DMData06.DAT
DMData07.DAT
DMData08.DAT
DMData09.DAT
DOL_RECOVERY02_01.bmp
FontData.ini
htc_fastboot.exe
isrt.dll
MonitorConsole.exe
PHONE.bmp
ReadMe_ARA.doc
ReadMe_BrPt.doc
ReadMe_Cze.doc
ReadMe_Dan.doc
ReadMe_Dut.doc
ReadMe_Eng.doc
ReadMe_EuPt.doc
ReadMe_EuSpa.doc
ReadMe_FIN.doc
ReadMe_Fra.doc
ReadMe_Ger.doc
ReadMe_Grk.doc
ReadMe_Ita.doc
ReadMe_Jap.doc
ReadMe_Nor.doc
ReadMe_Pol.doc
ReadMe_Rus.doc
ReadMe_SC.doc
ReadMe_Svk.doc
ReadMe_TC.doc
ReadMe_Thai.doc
ReadMe_TRK.doc
rom.zip
setup.inx
StringTable_0x0409.ips
UPD_RECOVERY00_01.bmp
UPD_RECOVERY01_01.bmp
UPD_RECOVERY02_01.bmp
UPD_RECOVERY03_01.bmp
UPD_RECOVERY04_01.bmp
_isres_0x0409.dll
I ran the file "ARUWizard.exe" and ...
HTC Android Phone ROM Update Utility 2.0.5.2013, some steps ok,
Verify that you want to apdate the ROM version from 4.06.651.9 to 3.04.651.2, ok
Some steps before, the ERROR [155]: UNKNOWN ERROR (the rom update cannot update. Please get the correct ROM update utility).
slash22toly said:
Code:
E:\ROMs\HTC One m7\fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.06.651.9
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: XXXXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXXXX
(bootloader) meid: XXXXXXXXXXXXXX
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4056mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s
So, I don´t need to use a twpr to flash the phone?. but from fastboot, how can i flash a .ZIP file? I thought i needed a .IMG
Click to expand...
Click to collapse
If you flash a rom, you must flash it using twrp and make sure your twrp is for M7WLS variant and that the rom is also for that variant. If flashing a RUU, you must flash it using fastboot. Yes the ruu are zip files, all the required .img files are packed inside of it, you just need to flash the entire zip file. You can only flash ruu for sprint so*the ones that match with the sprint CID MID and version number x.xx.651.x <----- important since your phone is s-off. Make sure you are flashing the right files because with s-off, you can brick your phone easily if flashing a file that is not for your variant. Better to ask if you are unsure.
Code:
fastboot oem rebootRUU
fastboot flash zip your_ruu_name.zip
fastboot flash zip your_ruu_name.zip
fastboot reboot
That ruu is a downgrade btw but it should flash fine since your phone is s-off.
Im not shure the ruu files. I think it will be better, if i flash a custom ROM whith twpr. I only need to find a ROM for sprint m7wls.
What ROM do you recomend?
slash22toly said:
Im not shure the ruu files. I think it will be better, if i flash a custom ROM whith twpr. I only need to find a ROM for sprint m7wls.
What ROM do you recomend?
Click to expand...
Click to collapse
you can find Sprint HTC One M7 rom there: http://forum.xda-developers.com/sprint-htc-one/development
Make sure your phone have all the requirements before flashing a rom. Some roms like the Lollipop ones, requires to be on the latest firmware to be used, so if its the case you won't be able to flash those one, you'll probably be limited to kitkat roms.
alray said:
you can find Sprint HTC One M7 rom there: http://forum.xda-developers.com/sprint-htc-one/development
Click to expand...
Click to collapse
Well, my solution...
I Install in my PC the HTC One M7 driver MTP
By Fastboot, I install a TWPJ (twrp-2.8.7.0-m7.img)
Wipe ALL and format.
Install the last Cyanogenmod (CM11) custom ROM (https://download.cyanogenmod.org/get/jenkins/90464/cm-11-20141112-SNAPSHOT-M12-m7spr.zip)
Install a Gapps for 4.4 (ARM-4.4-Pico) (OpenGapp)
Install the Argentina Radio (Link)
It Run OK!!!!!!!!
---------- Post added at 03:20 PM ---------- Previous post was at 02:48 PM ----------
Well, my solution...
I Install in my PC the HTC One M7 driver MTP
By Fastboot, I install a TWPJ 2.8.7
Wipe ALL and format.
Install the last Cyanogenmod (CM11) custom ROM (download.cyanogenmod.org/get/jenkins/90464/cm-11-20141112-SNAPSHOT-M12-m7spr.zip)
Install a Gapps for 4.4 (ARM-4.4-Pico) (opengapps.org)
Install the Argentina Radio (androidfilehost.com/?fid=23159073880933335)
It Run OK!!!!!!!!