Guys problem i8190n Baseband XXXX and IMEI Null, Help me ... - Galaxy S III Mini Q&A, Help & Troubleshooting

Guys I was doing a bit of modding to my mini S3 i8190 with CM10.1, just to try installing a kernel OC Xperia U, restarting the phone i have the SIM NO INSERT. Settings / Info / Baseband = XXXX, IMEI: null / null etc ...
PLEASE could you help me ... if you want to insert the script used by the kernel installed that allowed me to OC to 1.15 ghz!.
ui_print("| Phantom Kernel |");
ui_print("Wiping Dalvik Cache...");
run_program("/sbin/busybox", "mount", "/data");
run_program("/sbin/busybox", "rm", "-rf", "/data/dalvik-cache");
ui_print("Dalvik Cache Wiped...");
ui_print("Flashing The Kernel...");
assert(package_extract_file("kernel.elf", "/tmp/kernel.elf"),
write_raw_image("/tmp/kernel.elf", "/dev/block/mmcblk0p9"),
delete("/tmp/kernel.elf"));
:crying::crying::crying::crying:

Try to flash a stock Rom through Odin. And perform a factory reset after...
Sent from my GT-I8190 using xda app-developers app

Oh, that wasn't the best thing to do.
Kernel for i8190 goes to:
ui_print("");
show_progress(0.100000, 0);
show_progress(0.100000, 40);
ui_print("Flashing Kernel");
assert(package_extract_file("boot.img", "/tmp/boot.img"),
show_progress(0.100000, 70);
write_raw_image("/tmp/boot.img", "/dev/block/mmcblk0p20"),
show_progress(0.100000, 90);
delete("/tmp/boot.img"));
show_progress(0.100000, 100);
ui_print("Done");
I have no idea of what's in "dev/block/mmcblk0p9". Maybe someone else knows?
My advice is to first flash stock recovery through cwm or twrp.
Flash stock firmware in odin.
Use dialpad and enter *#*#0011#, use menu button and choose "back" , menu and "back" again. There you should have an option to rebuild/restore NV.
I doubt it will work but you can try.

not work men..
THX for reply but not work your method flash original STOCK FW and *#0011# not work...

mmcblk0p9 is only 1mb, and so are mmcblk0p10.
My guess is you fuc*ed up your partitions all the way to efs-partition which is in mmcblk0p11.

Fu*k
Ok man I sent the phone in for repair to samsung center near my house. Now I have to stay with a super turbo galaxy next idiot .... : (
The phone is expected to return on September 10

Piratino42 said:
Ok man I sent the phone in for repair to samsung center near my house. Now I have to stay with a super turbo galaxy next idiot .... : (
The phone is expected to return on September 10
Click to expand...
Click to collapse
Geez, a month?

shpubli have
Hi. I had same problem with xxxx Baseband. I added NV.dat in my phone, and everything works perfect.
Check this topic to fix xxxx Baseband. http://forum.xda-developers.com/showpost.php?p=42562414&postcount=19

I have alredy send to Samsung assistance.
Now download NV THX for reply this post.
Bye bye.
Alex!

imei, imeisv, baseband unknow.. firmware stock not rooted
@Piratino42 news? i've imei, imeisv, baseband unknow... without root and firmware stock brand vodafone. with *#1234# i haven't cp (it's black) only ap
(space black)
csc
status devicefficial; counter: 0 (binary custom: No).
can you help me? i haven't backup of efs folder . Is it hardware error?
i reflashed the same firmware stock wih odin but nothing it's changed! kies's error: gt-i8190n doesn't support the initialization.
software update by device: device registration ... warning not run
what's the secret code for service menu of gt-i8190n? thanks

Related

[Q] Missing CSC after JB update

Hi guys, I recently upgraded my android from GB to 4.1.2 XXLQ4. everything else works fine other than my 3G. Have tried everything ( resetting to factory, calling Customer Care(Airtel) etc) then while looking for a solution stumbled on the code *#1234# which shows
PDA: I9070XXLQ4
Phone: I9070XXLQ4
CSC: Unknown
Would the 3G problem be solved by flashing a CSC ? If so which CSC should i flash ?? the one for my Original Indian FW from 2.3.6 or the one from the XXLQ4 rom ?? And can someone send me the CSC folder from either 2.3.6 INU or 4.1.2 XXLQ4 ???
If none of these work i am planning to restore the rom back to GB, Would that Work ??
Please help me.
n2851991m said:
Hi guys, I recently upgraded my android from GB to 4.1.2 XXLQ4. everything else works fine other than my 3G. Have tried everything ( resetting to factory, calling Customer Care(Airtel) etc) then while looking for a solution stumbled on the code *#1234# which shows
PDA: I9070XXLQ4
Phone: I9070XXLQ4
CSC: Unknown
Would the 3G problem be solved by flashing a CSC ? If so which CSC should i flash ?? the one for my Original Indian FW from 2.3.6 or the one from the XXLQ4 rom ?? And can someone send me the CSC folder from either 2.3.6 INU or 4.1.2 XXLQ4 ???
If none of these work i am planning to restore the rom back to GB, Would that Work ??
Please help me.
Click to expand...
Click to collapse
power off your device..
press volume up + home + power buttons at the same time..
you will boot to recovery mode..
use volume keys to navigate to wipe cache and restore factory data..
select yes by using power button..
phone will reboot and will take a while..
set up the phone again..
see if its successful..
That Does not work
jaycm1130 said:
power off your device..
press volume up + home + power buttons at the same time..
you will boot to recovery mode..
use volume keys to navigate to wipe cache and restore factory data..
select yes by using power button..
phone will reboot and will take a while..
set up the phone again..
see if its successful..
Click to expand...
Click to collapse
Thanks for your reply but I have searched this forum and tried almost all solutions here. I have tried this but it did not work.. Ill try again just in case but for now this does not work
n2851991m said:
Thanks for your reply but I have searched this forum and tried almost all solutions here. I have tried this but it did not work.. Ill try again just in case but for now this does not work
Click to expand...
Click to collapse
you may try to reinstall the firmware via odin..
try to reset via recovery before and after the flashing process just to make sure..
n2851991m said:
Hi guys, I recently upgraded my android from GB to 4.1.2 XXLQ4. everything else works fine other than my 3G. Have tried everything ( resetting to factory, calling Customer Care(Airtel) etc) then while looking for a solution stumbled on the code *#1234# which shows
PDA: I9070XXLQ4
Phone: I9070XXLQ4
CSC: Unknown
Would the 3G problem be solved by flashing a CSC ? If so which CSC should i flash ?? the one for my Original Indian FW from 2.3.6 or the one from the XXLQ4 rom ?? And can someone send me the CSC folder from either 2.3.6 INU or 4.1.2 XXLQ4 ???
If none of these work i am planning to restore the rom back to GB, Would that Work ??
Please help me.
Click to expand...
Click to collapse
me too having same problem.. dont know why..
but it does not causing any problem...
may be its because fw is not from our region..
Edit : in root file explorer in a file called CSCversion.txt it is written 9070SERLPY
ravijani said:
me too having same problem.. dont know why..
but it does not causing any problem...
may be its because fw is not from our region..
Edit : in root file explorer in a file called CSCversion.txt it is written 9070SERLPY
Click to expand...
Click to collapse
noop i am from india and my CSC is ok see image
singhdharmendra48 said:
noop i am from india and my CSC is ok see image
Click to expand...
Click to collapse
Can you send me the link from where you downloaded the XXLQB rom ?? ( SamFirmware roms dont have a seperate CSC)
and also can you please confirm if 3G is working ??
n2851991m said:
Can you send me the link from where you downloaded the XXLQB rom ?? ( SamFirmware roms dont have a seperate CSC)
and also can you please confirm if 3G is working ??
Click to expand...
Click to collapse
this link to download http://d-h.st/36o
and 3G working for me bcoz mostly my friends connect to me video call:good:

Baseband [ UNKNOWN ]

Friend i had using CM 10 for 30 days, and one day my network is gone !
Then i investigate about it, and i found the errors !
1. Baseband ( unknown )
2. Imei ( unknown )
My phone is unable find the network, i can't use my sim all ways it showing " no service "
Then i tried Flash other BIN/FLS roms and also kdz rom !
Always the same error !
1. Baseband ( unknown )
2. Imei ( unknown )
I alsoflahed to V10e.. etc, V20n...etc, v30b....etc
The error Continues !
Then i went through a IMEI recovery thread, it also didn't work successful !
Then i finaly went through another thread, flashing baseband !
Flashing baseband also did work for me i tried flash V10 CP.... etc, V20 CP.....etc, V30 CP ..... etc.
It is finishing as succesful nothing change, same error
I tried to GetRil also Baseband is always unkown !
Help me to Resolve my Problem !
Please.
Help me
Help me Guys !
XDA Dev. NOoby
Lost imei and baseband after few days using. I don't undersatnd how did it happen?
Help
Will anyone Help me !
PLEASE
I
BEG
YOU
Ahmed Safeek said:
Will anyone Help me !
PLEASE
I
BEG
YOU
Click to expand...
Click to collapse
Go to lg-phone-firmware.com and download the latest firmware FOR YOUR COUNTRY. You will get a .kdz file. Use the kdz to bin/fls converter to convert this into bin and fls files. Use smartflashtool to flash these bin and fls files. it is important that you use the latest firmware of your region only. If you can't find the converter, I'll post the link tomorrow.
It is not my Problem
Exactly i tired with many kdz, and SFL but sill the same Bug
* No service.
* Baseband Unkown
* Imei " NULL "
How about a stock ROM?
Sent from my battery eating android monster!
No !
N00BY0815 said:
How about a stock ROM?
Click to expand...
Click to collapse
Yes i also tried flashing stock Pure kdz. roms !
But the issue is same #
Baseband Unknown, No IMEI, No coverage #
Ahmed Safeek said:
Yes i also tried flashing stock Pure kdz. roms !
But the issue is same #
Baseband Unknown, No IMEI, No coverage #
Click to expand...
Click to collapse
Did you maybe check: Erase entire cp, while flashing with sft? Oder kdz tool? If not, it probably is a hardware failure...
Sent from my battery eating android monster!
YEs
N00BY0815 said:
Did you maybe check: Erase entire cp, while flashing with sft? Oder kdz tool? If not, it probably is a hardware failure...
Click to expand...
Click to collapse
Yes alos tried that !

[Q] GT-I9305 IMEI Null / Null

Hello,
A friend bring me his S3 LTE, which doesn´t show IMEI.
*#06# shows - IMEI Null / Null
No EFS backup, no IMEI no sticker, but further I found the IMEI.
Already flashed latest version I9305XXBME3, still the same.
Already tried the param_bin file, flashed ok, but still no IMEI
[WARNING! + GUIDE] Backup and Restore IMEI / NV Data Procedure for GT-I9305 - xda-developers
Still no luck...
I can see the IMEI with "EFS professional" and i´m able to read IMEI and write IMEI. Says ok, but it´s not.
I need some help...
Thank you
Drug_Store said:
Hello,
A friend bring me his S3 LTE, which doesn´t show IMEI.
*#06# shows - IMEI Null / Null
No EFS backup, no IMEI no sticker, but further I found the IMEI.
Already flashed latest version I9305XXBME3, still the same.
Already tried the param_bin file, flashed ok, but still no IMEI
[WARNING! + GUIDE] Backup and Restore IMEI / NV Data Procedure for GT-I9305 - xda-developers
Still no luck...
I can see the IMEI with "EFS professional" and i´m able to read IMEI and write IMEI. Says ok, but it´s not.
I need some help...
Thank you
Click to expand...
Click to collapse
i have the same problem mate, and nothing help
on phone was custom firm and iam just go to official and now is not working (null null and unknow baseband)
did you resolve your problem ?
cheers
Just go snack to stock Rom and use persus kernel. It's a workaround for now
Sent from my GT-I9305 using xda app-developers app
winxuser said:
Just go snack to stock Rom and use persus kernel. It's a workaround for now
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Tried this few weeks ago, but no success.
I don´t have the unit in my possession anymore.
But tried all tips and tricks posted around the net. Maybe only with Z3X box, or at Samsung.
Drug_Store said:
Tried this few weeks ago, but no success.
I don´t have the unit in my possession anymore.
But tried all tips and tricks posted around the net. Maybe only with Z3X box, or at Samsung.
Click to expand...
Click to collapse
try this file is work for me
just flash the file via odin
Saw program for /EFS regeneration somewhere, will try to find it again
galaxy GT 9305
My imei says null. Have Tried restoring to factory settings and also using odin and the param file and flashed it using the odin methid but still nothing. Please tell me another way I can get back my imei step by step. Am desperate here
Schmirts said:
My imei says null. Have Tried restoring to factory settings and also using odin and the param file and flashed it using the odin methid but still nothing. Please tell me another way I can get back my imei step by step. Am desperate here
Click to expand...
Click to collapse
Your question has been posted multiple times . Forum rules require you to search before posting .
Google <<< I9300 your search terms > xda
Please ask in the existing threads .
Network IMEI EFS
http://forum.xda-developers.com/showthread.php?t=2393289
I have a problem???
Boot recovery
mouts and storange
format/system
format/data
format/preload
format/sdcard
format/extrermal sd
format/data and / data/media
Wipe cache, dalvic cache, wipe data/factory reset (not a must, but recommended)
Install zip from SD Card > choose zip
select rXTREME ROM version choice
Boot and have
Imei: null/ null
Base band Uknown
Boot recovery
I did restor
Imei: null/ null
Base band Uknown
Didin't hept
Install Param_Bin_I9305
Imei ok, baseband ok(XXBMD5), network ok I can call, but no DATA internet.
Connect KIES Update, after update baseband was changed (XXUEMK1)
Network ok I can call, but no DATA internet.
Wich baseband need use?
How it know?
Problem not basband?
Hey guys,
I've got a real noob issue with mine.
It came to me with null imei, and using the tools i have i was fairly sure i knew how to fix it and what was required, except the phone wouldnt take any of the box flashes i was trying to flash to it. It wouldnt take the imei_baseband fix at all. It just kept failing.
So, instead of trying 1 file md5 flash i thought i would try a FULL flash. However, apart from the CSC file i didnt know what order the files went in, so, instead of waiting and researching it, i just guessed. As you guessed it, the phone crapped out, and now i get the recovery error and it will only go to download mode.
These are the names of the files i got:
AP_I9305XXUEMKC_2051278_REV00_user_low_ship_tar.md5
BL_I9305XXUEMKC_2051278_REV00_user_low_ship_tar.md5 ( <--- i assumed this was boot file and left it alone)
CP_I9305XXUEMK1_REV06_CL1247969.tar.md5
THe other files were a CSC named file which i knew where it want and a pit file, which again i know where that goes, its just them 3 above....where do tehy need to go in Odin??
I'd really apprecaite your guys time on this.
Best Regards
STICKYS
http://forum.xda-developers.com/showthread.php?t=2344125
UNDERSTAND FIRST
http://forum.xda-developers.com/showthread.php?t=2362743
Network IMEI EFS
http://forum.xda-developers.com/showthread.php?t=2393289
Downgrade and network problems .
http://forum.xda-developers.com/showthread.php?t=2531221
Thankyou for them links - i do know that information already.
My question was, of the file names i have listed on the previous page what file goes where on Odin??
Ie, which one is 'phone' modem etc etc!!
mr_blonde said:
Thankyou for them links - i do know that information already.
My question was, of the file names i have listed on the previous page what file goes where on Odin??
Ie, which one is 'phone' modem etc etc!!
Click to expand...
Click to collapse
I9305XXUEMKC_I9305TENEMK1_I9305XXUEMK1_HOME.tar.md5
or
I9305XXUEMKC_I9305VD2EMK2_I9305XXUEMK1_HOME.tar.md5
mr_blonde said:
Thankyou for them links - i do know that information already.
My question was, of the file names i have listed on the previous page what file goes where on Odin??
Ie, which one is 'phone' modem etc etc!!
Click to expand...
Click to collapse
Its in the fff faqs and guides thats why i posted them .
JJEgan said:
Its in the fff faqs and guides thats why i posted them .
Click to expand...
Click to collapse
Hmm, well i have looked through all the faqs, and ive not come across anywhere where it says like AP file = PDA and CP file = Phone etc etc
Any chance please you can post the direct link here for me please?
JJEgan said:
Its in the fff faqs and guides thats why i posted them .
Click to expand...
Click to collapse
IMEI: ok.
I can do call, sms.
WiFi ok
BUT not working Mobile data.
GT-I9305
Baseband version
I9305XXUEMK1
Buil Munber
JSS15J.I9305XXUEMKC
How fix it?
thk
Hendra_sutanto said:
try this file is work for me
just flash the file via odin
Click to expand...
Click to collapse
thx a lot i am using this and it worked:good:
Insert sim card error - resolved
Hendra_sutanto said:
try this file is work for me
just flash the file via odin
Click to expand...
Click to collapse
Thanks a lot bro.. This worked for me... was in panic after I boot my S3 LTE. Since then it was not detecting the sim. But, flashing this file resolved it. Thanks again... :good:
Ok
help me
Drug_Store said:
Hello,
A friend bring me his S3 LTE, which doesn´t show IMEI.
*#06# shows - IMEI Null / Null
No EFS backup, no IMEI no sticker, but further I found the IMEI.
Already flashed latest version I9305XXBME3, still the same.
Already tried the param_bin file, flashed ok, but still no IMEI
[WARNING! + GUIDE] Backup and Restore IMEI / NV Data Procedure for GT-I9305 - xda-developers
Still no luck...
I can see the IMEI with "EFS professional" and i´m able to read IMEI and write IMEI. Says ok, but it´s not.
I need some help...
Thank you
Click to expand...
Click to collapse
The problem was not with the efs and you messed up ur phone more further by doing something else with efs

[Q] SIM Card not recognized

Galaxy S advance.
Rooted a while ago. Android 4.1.2
Baseband I9070XXLQ4
Today phone says 'no SIM'. I can't call, I can't be called. Only emergency calls.
SIM card works with other phones.
So it's software or hardware.
Help.
hardware.. seems like u got ur baseband.. so modem still working fine..
edit: if it happen after you root try flashing stock rom or kernel..
flash stock via Odin!
Sent from my GT-P1000 using Tapatalk 4
pawelarc said:
flash stock via Odin!
Sent from my GT-P1000 using Tapatalk 4
Click to expand...
Click to collapse
All the times I had this problem I've flashed stock ROM with Odin and I can confirm that it works. Seems that sometimes is a problem of SecPhone.apk
Thanks guys, but can you point in the right direction (with flashing the stock ROM)? Like, where do I find it and stuff...
(I don't know how I managed to root my phone without breaking it in the first place xD)
vici30 said:
Thanks guys, but can you point in the right direction (with flashing the stock ROM)? Like, where do I find it and stuff...
(I don't know how I managed to root my phone without breaking it in the first place xD)
Click to expand...
Click to collapse
I've writed how to reflash stock firmware in this thread, you can follow up to the sixth step, and if you are interested also to root and CoCore kernel go up to tenth step (after this reboot device)
EDIT: You don't need "Re-Partition" option in Odin
No SIM card (but network OK 4 bars)
Hi,
I have a 9070P (NFC) simlocked to Orange France.
I've got the very same "no SIM card" issue after upgrading to JB via Odin (3.07) (tar downloaded from samfirmware).
Network is OK (4 bars), but "no SIM card". The SIM works fine in any other phone I have tested + inserting a SIM from a different operator does not trigger the "enter unlock code" popup at startup.
My IMEI is OK and has always been (*#06#).
Note : from the many posts I've read, it is *not* stored in /efs on this phone but could be stored in CSPSA partition.
Note : I've always flashed the *right* firmwares for I9070P (not I9070).
What I have tried so far :
* restock to GB with this tutorial : http://forum.xda-developers.com/showthread.php?t=2247604
--> No SIM card
* then flashed Orange's stock firmware with Odin from samfirmware
--> No SIM card
* played a bit lot with "secret code" *#197328640# menus. It happened once that I recovered the SIM card + data connexion then it failed again after next boot. So I'm pretty sure the pb *is* software.
It's a pitty I have backed up my "efs", and "CSPSA" partitions (http://forum.xda-developers.com/showthread.php?t=2145464) after the pb occured...
I have rooted the phone, dumped and tried to analyse modem/RIL logs, but did not manage to spot the pb...
I'm used to linux, flashing and so on but not that much of Android intricaces, so if anybody is willing to help me finding the solution I'd pay him/her a bear (or two)
Questions : does anybody know how to check CSPSA partitions ? It's content might have been damaged during flashes. As I have repartitioned when downgrading, partition size should be OK, but as I have read somewhere in xda that that partition content might not be replaced when flashing a tar.md5 that contain a cspsa image (which is the case in the ROM flashed to downgrade) because it contains the IMEI encrypted.
-> is there a way to mount and explore it or to extract the content of a cspsa image from a ROM (I've tried to mount it as ext4: failure)?
Thanks in advance !
What version of Jelly Bean you have flashed the first time?
Hi!
It was this one : Germany (T-Mobile) I9070PXXLPJ grabbed from Samfirmare (I doubled checked it was the one for the "P" version)
Any known pb with those JB upgrades?
flentus said:
Hi!
It was this one : Germany (T-Mobile) I9070PXXLPJ grabbed from Samfirmare (I doubled checked it was the one for the "P" version)
Any known pb with those JB upgrades?
Click to expand...
Click to collapse
I don't know if this version has the simlock, maybe your phone doesn't recognize sim card because you have updated with Odin from a simlocked GB to a non-simlocked JB or with simlock from another carrier
Hm, did you try to do factory reset? People had problems with signal if they do not do it after GB>JB.
Sent from my GT-I9070 using Tapatalk
Tesla-MADAL93 said:
I don't know if this version has the simlock, maybe your phone doesn't recognize sim card because you have updated with Odin from a simlocked GB to a non-simlocked JB or with simlock from another carrier
Click to expand...
Click to collapse
I restocked to original ROM : still no Sim card + if the pb was simlock, it would ask for unlock code whereas it just say "no SIM card".
---------- Post added at 10:10 AM ---------- Previous post was at 09:57 AM ----------
shut_down said:
Hm, did you try to do factory reset? People had problems with signal if they do not do it after GB>JB.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
Yes, I did factory resets, cache wipes, dalvik cache erasure multiple times (like 20) : no dice.
Does anybody know how to activate and analyse modem and RIL logs (and manage debug level) ? I think it would help find the root cause faster than "trial and error" + decrease the risk of bricking.
flentus said:
I restocked to original ROM : still no Sim card + if the pb was simlock, it would ask for unlock code whereas it just say "no SIM card".
Click to expand...
Click to collapse
Right, as you said maybe the problem is really the CSPSA because simlock infos are stored in this partition, seems that there is no way to unpack or to see the files contained in it, if you try to reflash Jelly Bean using repartition?
Tesla-MADAL93 said:
Right, as you said maybe the problem is really the CSPSA because simlock infos are stored in this partition, seems that there is no way to unpack or to see the files contained in it, if you try to reflash Jelly Bean using repartition?
Click to expand...
Click to collapse
- Reflash Jelly Bean with repartion : already done without success + JB ROMs (I've seen until now) do not contain CSPSA partition.
But my problem is not SIM lock, it's "no SIM" at all, as I already said, if it was a Sim lock issue, I would have the "insert unlock code" dialog at logon.
- For reference : I've found the sources for CSPSA Android manager and desktop tools at : download.meego.com/live/home:/imppa/Trunk/src/[/url] (it's from the Meego project)
I think it would enable to read/write from/to CSPSA partition properly (not peeking/poking blindly).
- For now, I'm trying to analyse "adb logcat -b radio", but lots off errors seem to but "normal", I can hardly identify which ones are relevant.
Anybody reading radio logcat fluently ?
Guys, could any of you backup the 3 following partitions of their I9070P and post them somewhere to me so that I can try to restore them on my device to see if it sorts out my problems ?
The full tuto is here : http://forum.xda-developers.com/show....php?t=2145464
Thanks in advance !
Bump !
Nobody willing to help me ?
Tried installing CM10.1: still "no SIM"
search xda to find help contain tee folder
i forget links source
but u can after root
copy orginal tee folder from ,, lib ,, system , tee
i use zsmg2 work and copy tee folder and flash another rom then copy tee and replace them fine my simcard work
zakaria9 said:
search xda to find help contain tee folder
i forget links source
but u can after root
copy orginal tee folder from ,, lib ,, system , tee
i use zsmg2 work and copy tee folder and flash another rom then copy tee and replace them fine my simcard work
Click to expand...
Click to collapse
Hi Zakaria !
thanks for your answer.
This solution works if you have flashed a "I9070" ROM on a "I9070P". But I never did that, I have always flashed "P" ROMs.
I have checked the MD5sum of the files in my "tee" folder, they are (as expected) the same as the ones into the .zip you are recommending me (I've checked the rights too : everything is OK).
Given what I see in the radio logs (logcat -b radio), the problem appears to be under the RIL layer: modem seems OK but it replies that the SIM is "absent" when queried. It could be a hardware problem to, but as it worked well before, I don't think so.
I would really like to overwrite my CSPSA, modemFS and EFS partitions from a working I9070P to see if it would solve the pb (I've made backups of mine in the current "non working" state).
I'm just expecting someone to dump and send them to me...
Have a nice day.
flentus said:
Hi Zakaria !
thanks for your answer.
This solution works if you have flashed a "I9070" ROM on a "I9070P". But I never did that, I have always flashed "P" ROMs.
I have checked the MD5sum of the files in my "tee" folder, they are (as expected) the same as the ones into the .zip you are recommending me (I've checked the rights too : everything is OK).
Given what I see in the radio logs (logcat -b radio), the problem appears to be under the RIL layer: modem seems OK but it replies that the SIM is "absent" when queried. It could be a hardware problem to, but as it worked well before, I don't think so.
I would really like to overwrite my CSPSA, modemFS and EFS partitions from a working I9070P to see if it would solve the pb (I've made backups of mine in the current "non working" state).
I'm just expecting someone to dump and send them to me...
Have a nice day.
Click to expand...
Click to collapse
We do not have much P ROMs, maybe just one. What P ROM you flashed?
shut_down said:
We do not have much P ROMs, maybe just one. What P ROM you flashed?
Click to expand...
Click to collapse
I've always flashed stock ROMs from SamMobile. There are dozens of them.
As explained in a my first post in this thread, I have tried to upgrade to JB (German (T-Mobile) I9070PXXLPJ) : this is when appeared the "no SIM" problem.
Then I went back to GB (tutorial posted in xda ref. given in my 1st post) and then applied stock ROM from my Carrier: stil no SIM. (SIM card is OK in any other phone, and tried at least 3 other SIM cards from my carrier, -my phone is still SIM locked to it: no SIM).
Even if I use a SIM card from another carrier, I don't get the "Enter unlock code" popup.
If I remove any of those SIM while phone is on, I don't get the "SIM removed: reboot" popup.
I have even flashed the latest nightly CM10.1 for the I9070P.
I can past radio logcats if anybody want to have a look at it...
Flentus

i8190n Baseband unknow and IMEI Null,no rooted.only ap & csc,no cp. Help me, please!

i8190n Baseband unknow and IMEI Null,no rooted.only ap & csc,no cp. Help me, please!
Hi guys,
i've a samsung galaxy mini s3 with a problem: it's not read the sim card and contacts. It's imei null/null and baseband unknow.
with *#1234# it show ap and csc, no cp.
Imei, imeisv are unknows.
i've had it so in original condition: recovery stock, firmware stock and counter 0. I know that it's not rooted . I believe it's never been rooted.
I've reflash with odin the same firmware stock brand Vodafone but nothing is changed. After restored to factory reset not wipe cache, but how to fix it?
Help me! i've not a box!
if there's not cp, it's a hardware problem or software? Peoples's the same problem , cp is xxx . is it right?
thanks!
p.s.: it's not recognized by kies: after that i write model and s/n, for update the firmware, a message appears "gt-i8190n's not supportes the initialitation". Instead, if i confirm upload software by device, then device' registration , it shows "warning operation is not runned!"
up!
please help me!

Categories

Resources