Related
Introducing...
Darktremor Apps2SD 2.7.5.3 Beta 04
Date of Release: January 29, 2011
Download Current Version
Instructions - Change Log - Commands - ROM List - Developer's Guide
Darktremor Apps2SD Fan Page ----
Darktremor Apps2SD Development Group
Are you installing Darktremor Apps2SD on your phone? Here are the instructions to help you: Facebook
Are you a developer wanting to include Darktremor Apps2SD in your latest ROM? Here is the Developer Guide: Facebook
Click to expand...
Click to collapse
Update on Beta 4
It seems I'm getting mixed results with these betas. I'm not sure why this is occurring, some people have been able to get this working right while others have had a hard time with it.
Currently, I'm rebuilding the entire program. This takes a while because I have to figure out how to pack all these options into the program but make it small enough to where it will run correctly.
I will say that some of the beta features are coming back out...one of them is the search for a partition code. I suspect that code may be leading me into issues with certain platforms, so I'm going back to the 2.7.5.2 method of mounting (mmcblk0p2 or mmcblk1p2).
Also, parts of the code will use Busybox Ash (the only code that won't will be starta2sd, which will still use Bash for the time being). The startup code will definitely use Busybox Ash.
Until then, here are the links to the the last two betas and the last official release:
Version 2.7.5.3 Beta 04 - http://www.darktremor.info/files/a2sd/dtapps2sd-2.7.5.3-beta04-signed.zip
Version 2.7.5.3 Beta 03 - http://www.darktremor.info/files/a2sd/dtapps2sd-2.7.5.3-beta03-signed.zip
Version 2.7.5.2-1 - http://www.darktremor.info/files/a2sd/dtapps2sd-2.7.5.2-1-signed.zip
And, if you want past versions, you can view the repository: ftp://dtuser:[email protected] (ignore the smiley face...that's XDA doing that.)
Click to expand...
Click to collapse
Beta 04 took longer than I expected to release. I have done major changes to the code:
1. New commands: convert-ext4 - This will convert your EXT3 partition into EXT4. Just a friendly reminder on this command: Not every rom supports EXT4, so it is possible to go into a boot loop if you switch roms. Use with caution.
2. Reworked convert-ext3 (convert-ext4 gets similar code)...now a flag file is set before the reboot (no conversion is done before the reboot). At load time, the conversion is performed. This takes longer in the reboot process and you may think your phone has locked up...wait about five minutes before doing anything with the phone.
3. Repair is rebuilt...now it uses existing commands to repair the setup (reinstall, remove, cachesd, cachepart, nocache, datasd, nodata). Definitely shrinks the code.
4. Added fix_permissions program to the package. This may help with Superuser issues when using the datasd feature. It is used in reinstall, remove, datasd and nodata.
5. a2sd install is back!!! Both a2sd install and a2sd reinstall do the exact same thing.
6. Dalvik heap code has been shrunk and now creates a file called dalvikheap. Actually, the code has been doing this all along (since about 2.7.5.2, I think), but I never put the code in to use the file.
7. Low Memory Killer code has also been shrunk and uses a file caled dtset_lowmem to set the low memory killer parameter.
8. Replaced Busybox PS function with Toolbox PS. The issue with Busybox PS is that it gives a false reading when I look for android.process.acore (which is the main program when the GUI starts up). If that is present, the program thinks you are trying to run Darktremor without any command line parameters. This was because Busybox would report the process was there when, in reality, it wasn't (validated this when my phone was boot looping.) Toolbox's PS reports the correct setting. This should fix the bootlooping issues some people are experiencing.
9. New commands: usedtbusybox and usedefaultbusybox - these commands may help in diagnosing issues that is may be related to the native Busybox on your rom. a2sd usedtbusybox will use the Busybox that is packaged with Darktremor. a2sd usedefaultbusybox will turn back on the scan behavior of the program introduced in Beta 03.
10. Support for Darktremor Apps2SD version 2.7 and earlier has been discontinued. To upgrade correctly from one of those versions, use version 2.7.5.3 Beta 03b or earlier.
11. Finally fixed stalled boot issues (or at least my tests with several roms says so.)
See the change log for additional details.
You will notice that if the program runs repair and finds a problem, it will correct the issue and reboot. You will see a second reboot when the dalvik-cache clears (this is to fix timing issues with CyanogenMod...I can't control that startup as well as I can other roms). This only happens if repair is ran or you flash a new rom (as repair will realign all data). If you are upgrading from a previous version of Darktremor, you should not see the reboots.
Click to expand...
Click to collapse
This is Darktremor Apps2SD, a multipurpose program that primarily allows a user to execute applications created for the Android OS on their Secure Digital card (with the proper setup...more on that later). But, Darktremor Apps2SD is all about stability. The goal is to be able for all users of the Android OS to be able to take advantage of a method to run their applications from a secure digital card.
But just because the Darktremor Apps2SD is all about stability, doesn't mean it isn't packed with features:
- Move applications (both free and paid) to the Secure Digital card.
- Move Dalvik Cache to run either from your Secure Digital card or from your cache partition and clears the cache on demand.
- Boot Loop Protection: prevents the phone from boot looping in the event the SD card could not be mounted.
- Dalvik JIT for faster performance on Roms which support it.
- User selectable sizes for the Dalvik heap sizes, allowing a user to freely optimize their system.
- Activate a swap partition on your SD card and sets how often the swap partition is utilized.
- Automatically fixes configuration issues.
- Users can check the free space on their SD card and check the installation to make sure all is setup correctly.
- Runs ZipAlign on demand...this makes your programs load faster.
- Built in help system for easy reference of commands.
- All features can also be reversed without repartitioning your Secure Digital card.
- New logging features assists in troubleshooting issues.
- Commands to set the Low Memory Killer feature at boot time. Great for those people who are the "set it and forget it" type.
- And more...
Darktremor Apps2SD is not the same as Froyo Apps2SD. Froyo Apps2SD creates a secure folder on the FAT32 section of your SD card (this is the section that you see when you mount your phone to your computer) and stores the programs there. This is nice as you don't have to do anything special with the phone, but it isn't backwards compatible with older versions of Android (Cupcake, Donut, Eclair) and, because of the way Froyo works, older programs not designed for Froyo will automatically stay on your internal storage (unless you install a program that forces the move to your SD card).
Darktremor Apps2SD takes a different approach. Based on the original CyanogenMod works, Darktremor Apps2SD uses symbolic linking to force Android into moving your applications to the SD card. Because Android will not allow anything to be ran from the FAT32 partition on your SD card (and, in Froyo, it will only allow you to run programs from a special folder), Darktremor utilizes filesystems called EXT2, EXT3 and EXT4. Each one of these filesystems is native to Linux (the operating system running Android), which allows you to run programs from them (same as, say, a computer running Ubuntu). This method is completely compatible with all versions of Android, including Froyo. In fact, you can run both the Darktremor Apps2SD and Froyo Apps2SD at the same time.
Check out the list of Roms that either have Darktremor Apps2SD installed or are compatible with Darktremor Apps2SD. Click on the link labeled ROM List at the top of this message.
Very nice m8,
i'm using it on my CM7 Build #0, with much apps i have 156MB free..
cool man sounds orsum will have to add this to my new rom
Would you say this is better than the normal Froyo App2sd? is it any faster at loading the apps one the sd card loading from **** drive mode?
Froyo app2sd sucks, this one is heaps better as apps are stored on ext partition, so you save way more internal phone memory. And yea its fast.
Sent from my HTC Wildfire using XDA App
nice to se you here tkirton
but i would love to see you @ ZTE blade forum to
will use your app in those roms
I have now installed this, how do i know apps are being moved to the sd card?
I would love to for those roms. I'll have to look at the roms. Unfortunately, I don't have a ZTE Blade, but I don't own most of these phones that Darktremor works on (I only have a Sprint Hero and a Sprint Evo).
The more roms, the better.
danne_jo said:
nice to se you here tkirton
but i would love to see you @ ZTE blade forum to
will use your app in those roms
Click to expand...
Click to collapse
Run a2sd check. That will check the configuration and tell you if everything is setup correctly.
-Howad- said:
I have now installed this, how do i know apps are being moved to the sd card?
Click to expand...
Click to collapse
You can also just start "Titanium Backup" and check memory in the main screen
I installed Darktremor app2sd on Modaco custom rom (Froyo), and must say its excelent, I got internal memmory of 160 mb free, and now with 100 apps installed have 155 mb free. My ext3 partition is 512 mb and Dalvik cache is on ext3. With zipalign phone work well, no issues about stability, widgets work normal (its not case with Froyo a2sd).
Thanks Tkirton for this.
bump---new version available.
is there something what i have to do before installation?
i already have 2.7.5.2 .. or just install from new zip file?
anything before or after? (cahesd or smtg.)
rudyshy said:
is there something what i have to do before installation?
i already have 2.7.5.2 .. or just install from new zip file?
anything before or after? (cahesd or smtg.)
Click to expand...
Click to collapse
I want to know about that too. Can we flash the new version on top of the original one? Will it harm the installed apps?
"a2sd help" moves apps to phone???
"a2sd cachesdreset" doesn't seem to work???
how to instal it? i instaled it on 2.3 codegen from recovery chosing zip i downloaded and now everyting doesnt work in my phone. all programs are messed... i dont understand. now i need to reinstal new rom? because i lost a lot of programs and all widgets cant load.
Just flash on top of it.
rudyshy said:
is there something what i have to do before installation?
i already have 2.7.5.2 .. or just install from new zip file?
anything before or after? (cahesd or smtg.)
Click to expand...
Click to collapse
Download the 03a version...the Help issue is described on the first message.
Type a2sd reinstall to put the apps back on the phone.
As for a2sd cachesdreset, I will look into it.
UPDATE: I see the issue with a2sd cachesdreset. I'll issue an update shortly. In the meantime, use a2sd cachesd and, if you want to reset the cache, type a2sd resetcache
WackyWookie said:
"a2sd help" moves apps to phone???
"a2sd cachesdreset" doesn't seem to work???
Click to expand...
Click to collapse
Describe the steps that you went through in installing it, including any commands you ran after the install.
vilks said:
how to instal it? i instaled it on 2.3 codegen from recovery chosing zip i downloaded and now everyting doesnt work in my phone. all programs are messed... i dont understand. now i need to reinstal new rom? because i lost a lot of programs and all widgets cant load.
Click to expand...
Click to collapse
tkirton said:
Download the 03a version...the Help issue is described on the first message.
Type a2sd reinstall to put the apps back on the phone.
As for a2sd cachesdreset, I will look into it.
UPDATE: I see the issue with a2sd cachesdreset. I'll issue an update shortly. In the meantime, use a2sd cachesd and, if you want to reset the cache, type a2sd resetcache
Click to expand...
Click to collapse
Ah good I was starting to doubt my phone's installation, good to know it's a bug...
Sent from my HTC Wildfire using XDA App
WhisperCore
WhisperCore integrates with the underlying Android OS to protect everything you keep on your phone. This initial beta tech-demo features full disk encryption and basic platform management tools for Nexus S phones. WhisperCore presents a simple and unobstrusive interface to users, while providing powerful security and management APIs for developers.​
anyone tried this?
tempted to give it a go now!
Edit:
Just flashed it... BEWARE.. will erase all data / system / user data and 'unroot' your phone. When i rebooted, the padlock had gone and the phone was unrooted. Had to reflash cwm and restore backup.
and when rooting it back, it will ERASE SD CARD... so
BACKUP EVERYTHING FIRST =)
Not bad though, runs vanilla 2.3.3 with disk encryption and option to encrypt 'sd card', no other mods I could tell.
phrag said:
anyone tried this?
tempted to give it a go now!
Click to expand...
Click to collapse
I've tried. Not bad.
Anyone else tried this that can provide some more information?
Is it a new rom?
After using this for a week I have to say I'm impressed.
Its fast, battery is good and has been completely stable so far.
Hopefully there will be more modules coming soon. I dont think it would work using Netarchy kernel or similar.
Anyone know how I can get a tun.ko file that will work?
kexec is now fully working!
Kexec host kernel: https://github.com/willcast/ubuntu-kernel-tenderloin branch is "kexec"
Graphical bootloader: https://github.com/willcast/kexecboot
Compiled host kernel uImage UPDATED: https://docs.google.com/file/d/0B4WUjKii92l2RHJoNE93c2dVRlU/edit?usp=sharing
THE ATTACHED KERNEL PATCH (decomp_copy_atags.diff) _MUST_ BE APPLIED for ANY kernel to be bootable FROM kexec.
YouTube: http://www.youtube.com/watch?v=ko_4cOj_5iM
Kexec kernel and OS installation is best performed through SmackMe2, which is available in its own thread on this site.
I have no idea what you are saying, but keep up the great work!
Keep up the good work man , one question with you work in the future can we delete web os from the touchpad forever?
I imagine that's already possible. Use lvm to delete all the logical volumes not tied to another OS and then delete the uImage.webOS symlink. That deletes webOS, frees mostof its space and removes it from the moboot menu.
If you choose to do that, though, using the doctor to restore WEBOS will be even more difficult because you'll have to wipe out everything AND potentially need to "unbrick" your TP (using the method involving NovaCom, the small boot image ripped from the doctor and a string of LVM commands that is posted on sone or other forum.)
Lvm? Can you make a tutorial? How to remove webos from touchpad?
Thank you
Before this is complete or posted for testing, I think we will need a tutorial and links to files of how to fix the tp from a full brick such as issues with removing and restoring webos.
Great job if your boot loader works as planned we will have a full multi-boot device with a few restrictions(drivers for untested ports, etc).
Keep it up.
Sent from my cm_tenderloin using xda app-developers app
Awesome that you're resuming development castrwilliam! Can't help you with kexec though, sorry. I hang around in the Motorola Defy forums and some developers like Quarx have tried pursuing the kexec route in order to load custom kernels onto the Defy, might be worthwhile to throw him a PM. Would be great to have a more flexible bootloader!
I anyone needs a full restore, this thread helped me out. I followed the instructions when I screwed up and doctored without removing partitions. I believe WebOS Doctor handles repartitioning, so it should work:
http://forum.xda-developers.com/showthread.php?t=1426244
WORKING (but non-Kexec) Android multiboot for TouchPad.
DON'T TRY ANYTHING UNTIL YOU HAVE READ THE WHOLE POST!!
Beta 2 Updated with support for my Froyo Qcom kang.
I created a script that can install multiple versions of Android on the HP Touchpad, side by side, such that they can be selected at the MoBoot menu and operate independently. The script modifies them, on the Touchpad itself, to work with the new names for the partitions.
I want your feedback on this installer. It is used in the same way as ACME Installer but only shares one line of actual code with it (and it also uses the same binaries and config files on the initial ramdisk image, but they are Open Source so that should'nt matter.) I'll be posting this on XDA in a minute, my username there is also "castrwilliam".
If you do choose to use (TEST!) this:
- You need to create a folder on your media partition (the one that is shown when you select USB mode) with the following zips:
moboot [moboot_0.3.5.zip]
(the rest are optional but I recommend using them all so that you can help me test everything)
Froyo Test [Froyo-2.2.1-Qcom-Kang-Touchpad-a0.1-incl-gapps.zip]
CM7 alpha3.5 [update-cm-7.1.0-tenderloin-a3.5-fullofbugs.zip]
CM9 latest nightly [cm-9-xxxxxxxx-NIGHTLY-tenderloin.zip]
CM10 latest preview [cm-10-xxxxxxxx-EXPERIMENTAL-tenderloin-FOR_LIMITED_TESTING_ONLY_CAM.zip]
2.3.x gapps [gapps-gb-xxxxxxxx.zip]
4.0.x gapps [gapps-ics-xxxxxxxx.zip]
4.1.x gapps [gapps-jb-xxxxxxxx.zip] MAKE SURE not to use 4.2 gapps!
(NO Android Recovery will work yet, so don't try. It will reject TWRP and CWM at least.)
- If you already have Android and/or Moboot and/or native Linux (Ubuntu, etc.) installed:
* back up any data on your media volume. webOS should back up your apps for you.
* make both a nandroid (which WON'T work to restore in a multiboot config, but if you go back to single boot, it will be fine) and a Titanium backup [which should be portable to the same OS.]
* run ACMEUninstaller and then run SmackMe-Installer.
* if you have native Linux, backup your /etc and /home (I recommend the lovely GNU tar and gzip/bzip2). That should be the majority of what to keep.
* ALSO uninstall any native Linux you may be using after you back it up.
* lastly unzip and novacom boot the SmackMe-Installer.
If you don't already have Android, MoBoot OR native Linux, just:
* back up any data on your media volume. webOS should back up your apps for you.
* then unzip and novacom boot the SmackMe-Installer.
youtube demo:
http://www.youtube.com/watch?v=8Hhy20lzhR4&feature=youtu.be
File should be attached. Report bugs by PM'ing me, or posting in this thread
Can i remove webos with this multiboot? And stay only on android and ubuntu?
This is strictly an installer. I was going to write a webOS removal script. However, android doesn't have the needed binaries. That leaves me two options: make another thing like SmackMe to do it or do it under whatever version of native Ubuntu you are running. Either way, I really don't want to have to test it myself. If I need to I'll have to doctor my touchpad EVERY TIME I do it. That's a lot of doctoring and a lot of flash write wear. So the answer is basically "find me a dev that wants to remove webos too. They'll either make you one or beta test mine." Sorry man.
Amazing keep up the good work castrwilliam !
Strange request
Hey, does anyone here still have the 2011 Froyo (2.2.1) system dump for Touchpad? It wasn't CM6, just something that HP accidentally released and someone over at Rootzwiki dumped. I'm posting this here because I have no account and they'd think I'm a noob there. All the links are down to it and I want to try messing around with its files, just for kicks. Maaaaybe I can get it to boot, and add support for it to the SmackMe installer, so at least I can have *four* versions of Android on my touchpad.
http://forum.xda-developers.com/showthread.php?t=1234381
You know, 'cause I'm just that crazy.
Wow it's been hard to find it but i think this is the good dump:
http://download.digiex.net/Consoles/Tablets/HP-Touchpad-Android2.2.1-Disk-Images.zip
sources:
http://digiex.net/downloads/downloa...hpad-android-2-2-1-system-image-download.html
it's alive! (sorta)
Somebody on XDA found a link that I thought was dead. It was the mmc dump of someone who had Froyo leaked by HP onto their fire-sale Touchpad.
FAQ:
"Obviously nobody wants this. Everybody's running Jelly Bean."
That's exectly why I did it. My point is to do the most outrageous and downright unnecessary things possible with commonplace hardware.
"What doesn't work?"
Rotation, sound, wi-fi, softkeys (i.e. Home, Back, Menu, Search.)
"What does work?"
Camera (OH HAYULL YA), touchscreen, battery reading, power button, volume button (but it dosen't matter b/c sound is borked).
"I can haz Modded Froyo?!"
Not yet.
YouTube: http://www.youtube.com/watch?v=zX29IcTIB14
Hah awesome work, I think you hold the record of most different OS'es on one device now! It looks quite functional already.
Oh and about the "Obviously nobody wants this. Everybody's running Jelly Bean." quote, I only run WebOS and your Ubuntu 12.10 port on the TP!
As soon as I get my power button sorted out I am on this!
Sent from my slim_tenderloin using xda app-developers app
Hey everyone! Froyo here!
I've just zipped up my Froyo kang such that it will work if flashed from SmackMe, and if you're crazy enough to run it alone, hopefully also Android recovery.
sound works!!
The Wi-Fi works now BUT YOU NEED A STATIC IP ADDRESS. (problems with dhcpcd)
The buttons are hacked to work (by my new shell script: /system/bin/buttond, check it out) as follows:
Volume Down is Back
Volume Up is Menu
Center is Home.
Obviously once the audio works (if ever) that will be an issue. My embarrassing secret (at least probably to the devs here) is that I don't know Java. That makes it difficult to mod on any touchscreen buttons...
The real audio library is /system/lib/libaudioflinger.real.so and the stub one (default via a symlink) is /system/lib/audioflinger.so. Using the real one causes bootloops.
Auto rotation still won't function.
Google Apps and even Facebook are included in this ROM. (It's not CM6.) So are some potentially geeky Qualcomm apps.
Don't set up your Google Account during first boot, because it will ask you to slide the keyboard open. That sounds pretty impossible onn this device. Set it up from Settings later, and you shouldn't have that issue.
UPDATED due to install issues with actual Android Recovery. Redownload.
Download Initial Version (Alpha Minus-One-Point-One): https://www.dropbox.com/s/wcs2mra8aedj1hf/Froyo-2.2.1-Qcom-Kang-Touchpad-a0.1-incl-gapps.zip
Download Second Version (Alpha 0.2): https://www.dropbox.com/s/t1cptjj5i02epas/Froyo-2.2.1-Qcom-Kang-Touchpad-a0.2-incl-gapps.zip
^^^
I wanted to try froyo soo bad when I heard about those dumps last year (I think) lol. I still want to try it.
Now, if I read correctly, I can flash this from TWRP/CWM right?
jacobas92 said:
^^^
I wanted to try this soo bad when I heard about it last year lol. I still want to try it.
Now, if I read correctly, I can flash this from TWRP/CWM right?
Click to expand...
Click to collapse
It should work from that. I only tried with my SmackMeInstaller from the last page. That said... MAKE A NANDROID, because it WILL delete your current Android install, and if anything goes wrong (or even if it works but you see a CWM/TWRP error/warning), tell me and I'll fix it.
castrwilliam said:
It should work from that. I only tried with my SmackMeInstaller from the last page. That said... MAKE A NANDROID, because it WILL delete your current Android install, and if anything goes wrong (or even if it works but you see a CWM/TWRP error/warning), tell me and I'll fix it.
Click to expand...
Click to collapse
Ok, thanks!
Summarized Standard Disclaimer: use at your own risk. I use it at mine.
*Full wipe recommended if coming from another kitkat rom*
MAKE SURE TO HAVE A BROWSER APK. THERE IS NO MORE STOCK BROWSER. For firefox see below.
My personal build "Diamond Rom 4.4" is based on omnirom with the following additions:
CM Calculator (the newly redone one they're proud of)
CM File Manager
CM Wallpapers
Bash shell
Nano text editor
Powertop
Koush's full featured open source superuser (and it's INTEGRATED into settings :cyclops: )
Carbon rom blue balls wallpaper
Cyanogenmod port of 2 column settings adapted to Omni rom.
Omni floating window
I've added a few of my personal touches which include
Batter circle color changing: green 100%-51% yellow 50%-16% red 15%-0% This was my favorite I9000M framework-res mod that I've missed since switching to CM7.2 way back.
Killed lock screen music full screen (personal privacy thing when riding public transportation)
Disable android external storage management: messes with ext4 formatted hard drives or multi partitioned hard drives. Use the unix style mount command
Disable hardware keyboard on boot: disabled but not removed. You'll have to manually turn it on
Removed camera sounds
Disable SELinux at the kernel level. It's even disabled on my laptop/desktop at the kernel because it seems like it's more trouble than it's worth.
Put the dalvik cache in the cache partition. Don't waste the data partition for it. :cyclops:
And of course, comes bundled with my A1 kernel :cyclops:
Every thing I've tested: camera, youtube hd, sound, gps, usb otg(use manual mount command) etc work.
*Instructions*
First time flashing omni:
-Read second post FAQ and other important information.
-Flash TWRP (you can flash twrp over cwm from cwm if you're in that situation)
-Reboot into new recovery
-Make recovery backup (optional)
-Run Titanium Backup (highly recommended)
-Full wipe
-Format system partition
-Install ROM
-Install gapps
-Reboot :cyclops:
Subsequent flashes:
-Install ROM
Downloads
Mediafire Wifi download folder with md5sum file
Mediafire 3G download folder with md5sum file
Mediafire TMobile download folder with md5sum file
*Authorization to download is just a captcha. Simply enter the text in the picture or name the item being advertised in the picture.* Mediafire sure beats sh***y sites like uploaded.net or rapidgator
A1 Kernel (as its own download)
V1.9.2: Security fix made aware by cyanogenmod, specifically this. The commit message on my github has a copy and paste mistake. It should list both of those security flaws as patched instead of the same one twice. Oops :cyclops: Security fix comes with ALL roms June 28 and onwards.
3G/Wifi 6ff199d6c9037d222a70ec0c561c8028
TMobile a675fd353ad3ad7dbf8e6bf2109fa360
TWRP Recovery
2.7.1.0 Wifi 6c995325e749e7561893e398847b09a0
2.7.1.0 3G 8fa04be69d0faf3d9a134e829ddff680
2.7.1.0 Wifi July 8 a8d12c13aac7430a319369069d814e72
2.7.1.0 3G July 8 dc1c50622c29c621f29b95f4c53734ea
2.7.1.0 Wifi August 11 b2c21e8fd58dc38a9c8b7669031b84b1
2.7.1.0 3G August 11 9f48defe78391e63a9053cbd281f738f
2.7.1.0 TMobile August 11 87fb29c803a2e3a56d98a1475c5fce8f
2.8.0.0 Wifi cfdac70d0ccac34cf220887eab72f8b0
2.8.0.0 3G d7918eb397f54c484e04a6d5cb07945c
2.8.0.0 TMobile aaf7c6d2455ca32178ec846f5186c774
Newer versions of firefox explicitly disable flash on tegra2. Use my firefox mod which is just normal firefox with a hacked tegra2 blacklisting mechanism. Don't use the old firefox apk. It has unpatched security holes.
Changelog: omnirom gerrit
Sources: https://github.com/AAccount?tab=repositories Has my device trees as well as all the omni repos I forked with my additions.
Credits:
Kasper_h: helping to make 4.4 possible
pershoot: original device tree from CM10.1
Omni team: providing great starter rom and keeping it TF101 compatible
fred6681: original gapps package. I just removed the 4.4.2 check
Cyanogenmod team: rom extras like calculator, superuser, to fill in Omni's missing holes and 2 panel settings template.
XDA:DevDB Information
Omnirom+ 4.4 for Galaxy Tab 10.1, ROM for the Samsung Galaxy Tab 10.1
Contributors
AAccount
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.1.x
Based On: Omni
Version Information
Status: Stable
Created 2014-10-12
Last Updated 2014-10-11
Known Issues:
Wifi signal indicator and speed indicator don't show up
No list of 3G APN. Write down your settings first
Bluetooth audio issues
Recovery adb doesn't start automatically. In recovery, go to Advanced --> ADB Sideload and start it. You can then cancel it if you don't want to use that. It just starts the recovery adb and will continue to run until you reboot. fixed thanks to twa_priv
Use another recovery for TMobile. Apparently the twrps I make can't boot on TMobile hardware even though it boots on my Wifi only.
FAQ
How do I get multi window: Settings-->(second) More --> App circle bar (check box) && --> Included apps (choose what you want available in multi window)
Yes you can flash TWRP over CWM
Random flickering: Try Settings-->Developer options -->Disable HW Overlays.
Can't install a very large quantity of apps: fix
Can't mount ext4 media: kill the e2fsck process assuming you safely removed the media before sticking into the tablet.
(Below this is optional)
(Android device manager does have legitimate uses. However, please read and consider the following paranoid but realistic fantasy:)
Completely disable android device manager: By only going to Settings->Security->Device administrators and un checking "Android Device Manager" this doesn't completely remove the ability for google to send in commands to your device. Go to the google play store through a web browser, choose android device manager, and try "ringing" your device. To my horror, my tablet started to ring as if it got a phone call. I don't find it acceptable that gapps gives google a way to setup a remote command and control operation. In any other operating system this is considered a back door or virus.
To close this back door install Xprivacy. Enable system apps to be modified. Look for the entry (should be highlghted in red to indicate a system app) "Google Account Manager, Google Backup Transport... (lots of items here) ...Google Services Framework". Check mark Notifications and open its menu. Check mark the items in red. These are cloud to device (c2d) permissions which do exactly what you think. While not necessary, disable identification too for good measure. This disabled the ring feature on my tablet which means android device manager should no longer be able to send in commands. I don't have the guts to try the device wipe feature but it should work too. Do not disable location otherwise google maps won't be able to find you which means no gps car navigation.
See this post about building from source. I use a different, simpler trick for prebuilt chromium binaries. Fear not, they are source built but only when there are real source changes. They're just recycled in between to save 90mins/build of time.
Downloading now!! Thanks for your work!!
Enviado desde mi GT-I9195 mediante Tapatalk
Another 4.4.3 for the tab?
Thank you very much!
Hi AAccount,
thanks for your 4.4.3 ROM, sounds promising ... however, what about the graphical glitches on that vesion? I always went back to ROM version CM10.2/SGT7 as this seems to be the latest one without those glitches (last version I tried was Nameless ROM version 4.4.2 where they were still visible ... and annoying).
Thanks in advance,
mistersixt.
Great job!! Runs fast without bugs and glitches, only youtube HD...
The best kitkat rom!! Thanks !
Enviado desde mi GT-P7510 mediante Tapatalk
Best kitkat rom. I have some glitches. It is not as smooth as cm10.2 so i am going back to cm10.2.
What graphical glitches do you mean? I think ever since omni fixed the screenshot way back most graphical bugs have been ironed out. By youtube hd do you mean it doesn't play or can be laggy? If you mean laggy I read on wikipedia the GPU video decoding on the tegra2 sucks. That's a hardware problem.
3G build and new recovery coming later today. I cheated the chrome renderer build process by copying all the freshly done ones from the wifi only output folder.
My github is now fully up to date with all the appropriate omni repos forked with my personal touches whether it be the audio blob fixes or little things I like.
Sent from my GT-P7510
What are the flashing instructions? Is there a preferred gapps package?
Sent from my GT-P7510 using Tapatalk
AAccount said:
What graphical glitches do you mean?
Click to expand...
Click to collapse
With all ROMs starting with 4.3 it looks like if a flash of lightning goes from one corner to the other (my wife is saying it looks more like a scratch) for maybe 100 ms, this happens quite constantly though, every minute or something. Also, in some games like flappy bird the application gets stuck for maybe 100 to 200 ms completely (every 5 to 10 seconds maybe) before it continues, this makes playing games unpossible (temple run is another good example).
With 10.2/SGT7 this does not happen ... for whatever reason.
Regards, mistersixt.
lancem71 said:
What are the flashing instructions? Is there a preferred gapps package?
Sent from my GT-P7510 using Tapatalk
Click to expand...
Click to collapse
I added instructions. There's no really preferred gapps package. I just like that one because it's the smallest one that gets the job done. There are some gapps packages that are bigger than the rom which I consider bloated.
mistersixt said:
With all ROMs starting with 4.3 it looks like if a flash of lightning goes from one corner to the other (my wife is saying it looks more like a scratch) for maybe 100 ms, this happens quite constantly though, every minute or something. Also, in some games like flappy bird the application gets stuck for maybe 100 to 200 ms completely (every 5 to 10 seconds maybe) before it continues, this makes playing games unpossible (temple run is another good example).
With 10.2/SGT7 this does not happen ... for whatever reason.
Regards, mistersixt.
Click to expand...
Click to collapse
I get these randomly sometimes but not often enough that I would consider it an issue. In angry birds it's an issue but if you go to Settings-->Developer Options check mark "Force GPU rendering" and "Disable HW overlays". Then you can play angry birds at least without the lightning.
And now for an important question
I have a script that puts /data/dalvik-cache on /cache/dalvik-cache as it was way back in android 2.2 froyo. Even though our tablet shipped with android 3.0 and my I9300 S3 shipped with android 4.0, Samsung seems to have been very sloppy and left the /cache partition huge to accomodate the froyo standard. This is a waste of space that will never be used. The cache paritition is 0.5GB. Is it OK if I include this script as a boot script? Is 0.5GB/500MB enough for most peoples' dalvik-cache? This will free up that space and add it to the internal sd card.
Great room, thanks! Everything working OK during the first hour of use
Sent from my GT-P7500 using XDA Free mobile app
Thanks for posting this! Great ROM. Only problem I'm having is the APN settings are blank for my 3G tablet (P7500). I input them manually and everything works, but normally they are preset.
AAccount said:
I get these randomly sometimes but not often enough that I would consider it an issue. In angry birds it's an issue but if you go to Settings-->Developer Options check mark "Force GPU rendering" and "Disable HW overlays". Then you can play angry birds at least without the lightning.
And now for an important question
I have a script that puts /data/dalvik-cache on /cache/dalvik-cache as it was way back in android 2.2 froyo. Even though our tablet shipped with android 3.0 and my I9300 S3 shipped with android 4.0, Samsung seems to have been very sloppy and left the /cache partition huge to accomodate the froyo standard. This is a waste of space that will never be used. The cache paritition is 0.5GB. Is it OK if I include this script as a boot script? Is 0.5GB/500MB enough for most peoples' dalvik-cache? This will free up that space and add it to the internal sd card.
Click to expand...
Click to collapse
Many thanks for this!
"Disable HW overlays"- for some reason this setting does not stick between reboots (not your ROM problem- it happens in all devices that I've ever seen). Is there a way to apply it automatically during or after boot? Such as in a script, or init settings etc?
Regarding the Dalvik cache, is there a way to know how much space all my installed apps + system are currently using?
jaibar said:
Regarding the Dalvik cache, is there a way to know how much space all my installed apps + system are currently using?
Click to expand...
Click to collapse
Go to the CM File Manager --> Settings --> General Settings -> Compute folder statistics and check mark that box. Also in the same area be sure to set access mode to prompt user mode or root access mode. Then, go to /data and hold dalvik-cache folder until get a menu and choose properties. The size will show up under "Size: ". Mine is 208mb.
AAccount said:
Go to the CM File Manager --> Settings --> General Settings -> Compute folder statistics and check mark that box. Also in the same area be sure to set access mode to prompt user mode or root access mode. Then, go to /data and hold dalvik-cache folder until get a menu and choose properties. The size will show up under "Size: ". Mine is 208mb.
Click to expand...
Click to collapse
238MB here. Maybe a quick poll can help gather info on how much allocation must users are using?
Sent from my GT-P7510 using Tapatalk
jaibar said:
238MB here. Maybe a quick poll can help gather info on how much allocation must users are using?
Sent from my GT-P7510 using Tapatalk
Click to expand...
Click to collapse
Same around 2xx mb. I'm fine with it, since the 400mb in /cache is wasted anyway.
Sent from my GT-P7500 using Tapatalk
223MB here
Is Netflix working on this ROM. Asking because there is problems on the Nameless ROM.
Sendt fra min GT-I9305 med Tapatalk
thra1982 said:
Is Netflix working on this ROM. Asking because there is problems on the Nameless ROM.
Click to expand...
Click to collapse
Every time somebody asks about Netflix... I fell I'm missing something big...
Will cyanogenmod 13 come to the kindle fire hd 7 (Tate)?
Yep, @BuQQzz and I (mostly him, haha) are working on porting CM13 to this device, as well as the 8.9" (jem). I'm not exactly sure when a usable build will be uploaded, but it should be in the not-so-distant future.
I'm running 12.1 on mine and even though the rom is very lean the Kindle is always running slow. I have 2 questions concerning this. One, based on what you're seeing so far during development, is the rom running at a better speed?
Two, what steps can I take to make sure I am running the best I can for the best results?
The system was wiped completely. I did a super clean install, I've made a backup and moved it to my desktop (in case I need to push it), and I usually only do an update about once every two weeks. Mainly due to the fact that I have to jump through all the hoops of reinstalling Google Play Services, Google games, and the SuperSU beta.
If there are other things you think may help please give suggestions and advice. I can add external storage, however at the moment I do not have an SD card in the slot. To me since storage and RAM are two different things I am thinking it would make little difference to add external storage since I have very few apps downloaded on it.
Jaybone073 said:
I'm running 12.1 on mine and even though the rom is very lean the Kindle is always running slow. I have 2 questions concerning this. One, based on what you're seeing so far during development, is the rom running at a better speed?
Two, what steps can I take to make sure I am running the best I can for the best results?
The system was wiped completely. I did a super clean install, I've made a backup and moved it to my desktop (in case I need to push it), and I usually only do an update about once every two weeks. Mainly due to the fact that I have to jump through all the hoops of reinstalling Google Play Services, Google games, and the SuperSU beta.
If there are other things you think may help please give suggestions and advice. I can add external storage, however at the moment I do not have an SD card in the slot. To me since storage and RAM are two different things I am thinking it would make little difference to add external storage since I have very few apps downloaded on it.
Click to expand...
Click to collapse
1) The ROM currently doesn't even boot up at this point. It's an issue with SELinux that we're working to resolve.
2) I would suggest that you avoid having too many apps on the device - doing so tends to make app optimization take longer (which usually occurs after an OTA or a manual cache wipe). Also, try not to have too many xposed modules or other android mods on your device - if modules or frameworks conflict with each other or the base system, system stability and speed can be negatively impacted. As for the issues with having to reflash gapps, xposed, etc. after an OTA, I use CM Downloader (which is available on the Play Store) to automatically handle flashing other zips after the CM base ROM.
You're right - storage and RAM are two different things. Unless you're low on storage and/or need to share files between multiple devices, I wouldn't see a need for an SD card. Also, I'm fairly certain that the 2012 HD 7" (tate) doesn't have an SD card slot (are you using a 5th generation device?). This discussion is for the 2012 HD 7" models, not for other (or later) models; flashing a ROM meant for another device can and most likely will brick your kindle.
monster1612 said:
1) The ROM currently doesn't even boot up at this point. It's an issue with SELinux that we're working to resolve.
2) I would suggest that you avoid having too many apps on the device - doing so tends to make app optimization take longer (which usually occurs after an OTA or a manual cache wipe). Also, try not to have too many xposed modules or other android mods on your device - if modules or frameworks conflict with each other or the base system, system stability and speed can be negatively impacted. As for the issues with having to reflash gapps, xposed, etc. after an OTA, I use CM Downloader (which is available on the Play Store) to automatically handle flashing other zips after the CM base ROM.
You're right - storage and RAM are two different things. Unless you're low on storage and/or need to share files between multiple devices, I wouldn't see a need for an SD card. Also, I'm fairly certain that the 2012 HD 7" (tate) doesn't have an SD card slot (are you using a 5th generation device?). This discussion is for the 2012 HD 7" models, not for other (or later) models; flashing a ROM meant for another device can and most likely will brick your kindle.
Click to expand...
Click to collapse
I stand corrected. There is no external slot. I was mistaking the back logo panel as a possible external storage cover. My son has had the device for quite some time and he asked dad (me) to give it the "works". The device was running atrocious and much slower than it does now. I've had it for about 2 months and after installing the 2nd bootloader, rooting, twrp recovery..... You get the idea, I had it very stable and clean. It's been running quite well on 12.1 and I am pleased to see development still happening for such an older device.
As far as apps go, I have only installed what he likes. A few games (about 4) and a couple of social ones like Instagram and facebook for him. The real slowdown was actually with Facebook continually not updating and having errors. A recent reboot has fixed that. It also appears that the occasional reboot is actually helping the rom settle in.
I had previously tried the CyanDelta Updater on the play store and it didn't work well. I will now give CM Downloader a try to see of that keeps me from having to reflash the GApps and other apk that seem to force close that I had previously mentioned.
Thanks for the quick response and advice.
Jaybone073 said:
I stand corrected. There is no external slot. I was mistaking the back logo panel as a possible external storage cover. My son has had the device for quite some time and he asked dad (me) to give it the "works". The device was running atrocious and much slower than it does now. I've had it for about 2 months and after installing the 2nd bootloader, rooting, twrp recovery..... You get the idea, I had it very stable and clean. It's been running quite well on 12.1 and I am pleased to see development still happening for such an older device.
As far as apps go, I have only installed what he likes. A few games (about 4) and a couple of social ones like Instagram and facebook for him. The real slowdown was actually with Facebook continually not updating and having errors. A recent reboot has fixed that. It also appears that the occasional reboot is actually helping the rom settle in.
I had previously tried the CyanDelta Updater on the play store and it didn't work well. I will now give CM Downloader a try to see of that keeps me from having to reflash the GApps and other apk that seem to force close that I had previously mentioned.
Thanks for the quick response and advice.
Click to expand...
Click to collapse
If you go into the CM Downloader app settings, you should be able to add in the zips (maximum of 6) you want flashed after a ROM update. Once that's complete, all you need to do is download an update and initialize the install process from within the app, and it'll handle flashing the zips. From personal experience on CM nightlies for jem (the 8.9" version), I tend to see stability break down after about 24 hours of device uptime without a reboot, so reboots do help significantly.
Any progress so far?
Pix12 said:
Any progress so far?
Click to expand...
Click to collapse
Currently, the generated zips take longer than cm12.1 to flash (but they still flash successfully). As for a functional ROM, that hasn't happened yet - it refuses to boot after about 5 seconds. last_kmsg says it's an SELinux issue.