Database Develop

[Q] Galaxy Tab: Overcome to CM9

Hi,
I have a Galaxy Tab P-1000, and some months ago I installed the Overcome 7 v.4.1.0 ROM following this guide: www .teamovercome.net/p1000/?page_id=17.
Now I'd like to install the new official CM9, but I don't know which steps I have to follow, since I don't have a stock rom anymore.
This is the guide I'm trying to follow: wiki.cyanogenmod.com/wiki/Samsung_Galaxy_Tab_%28GSM%29:_Full_Update_Guide
Should I simply follow the steps in the "Flashing CyanogenMod" section, since I already have installed the Overcome ROM with its "Overcome CwMod Recovery version 4.1.0.9"?
Thanks

Yes, put cm9 zip and gapps zip in sdcard,
Boot to cwm recovery,
Then wipe cache, data and dalvik cache, then flash cm9 (may need to do twice) then flash gapps.
Sent from my GT-P1000 using xda app-developers app

priyana said:
Yes, put cm9 zip and gapps zip in sdcard,
Boot to cwm recovery,
Then wipe cache, data and dalvik cache, then flash cm9 (may need to do twice) then flash gapps.
Click to expand...
Click to collapse
Worked like a charm! Thank u!

[Q] Issue installing CM10 Nightly

So, it`s my first custom rom so i don't have any experience with it, so yes, i'm a noobie.
I've seen the ICS 4.0 Sources Out thread for a while and when i saw the CM10 release by arcee i decided to give it a try
but got stuck on LG boot logo.
What i did:
1. install cwm recovery v4.0.0.5
2. wipe data/factory reset
3. wipe cache partition
4. install cm-10-20121030-nightly-p990.zip (success install)
5. reboot system now
Then it get stucked at the lg logo... i can acess the cwm and try to reflash the ROM... but it'll get stuck at the same logo
Any solution?
Thanks
EDIT1: Ok, i just flashed a stock rom and it worked... now i'm on stock gingerbread 2.3.4, any tutorial to install cm10?
Thanks a lot... i just tought i bricked my phone

Javiern said:
So, it`s my first custom rom so i don't have any experience with it, so yes, i'm a noobie.
I've seen the ICS 4.0 Sources Out thread for a while and when i saw the CM10 release by arcee i decided to give it a try
but got stuck on LG boot logo.
What i did:
1. install cwm recovery v4.0.0.5
2. wipe data/factory reset
3. wipe cache partition
4. install cm-10-20121030-nightly-p990.zip (sucess install)
5. reboot system now
Then it get stucked at the lg logo... i can acess the cwm and try to reflash the ROM... but it'll get stuck at the same logo
Any solution?
Thanks
Thanks
Click to expand...
Click to collapse
Wipe system also then try.
Sent from my LG-P999

how?
cricketAC said:
Wipe system also then try.
Sent from my LG-P999
Click to expand...
Click to collapse
How i do that? i don't see that option on cwm recovery
"
-reboot system now
-apply update from sdcard
-wipe data/factory reset (that's the one i used)
-wipe cache partition
-install zip from sdcard
-backup and restore
-mounts and storage
-advanced
-power off
-go back
"
EDIT1: I tried to format /system but it says "unable to mount"... mount doesn't work either
EDIT2: Backup file it isn't working... totally f***** up

1: wipe data/factory reset
2: wipe cache
3: advanced>wipe dalvik cache
4: mounts n storage>format data, format cache n format system
this is what is meant by full wipe
5: install CM10
6: install latest gapps package for jb
7: reboot system
this should work

Hey,
This helped for me: (no bugs for now)
-Nvflash to original GB rom from lg
-rooted the device
-installed cwm
-flash cm7 (latest nightly as recommended fom ricardo for the bootloader etc)
-installed gb gapps
-installed first cm10 nightly
everything workes fine so far
I came from the cm9 paranoid build
I also wasstuck at the logo both with cm7 and 10
hope it'll help you
Sent from my LG-P990 using xda app-developers app

zxr72 said:
Hey,
This helped for me: (no bugs for now)
-Nvflash to original GB rom from lg
-rooted the device
-installed cwm
-flash cm7 (latest nightly as recommended fom ricardo for the bootloader etc)
-installed gb gapps
-installed first cm10 nightly
everything workes fine so far
I came from the cm9 paranoid build
I also wasstuck at the logo both with cm7 and 10
hope it'll help you
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
I just did almost the same thing, just didn't flash cm7
working now... CM10 is soooo smooth
any bug? i don't get the vibration bug, clock FC or the non see External SD
all is working great... wow
Thanks for the help

What am I doing wrong?
Hi!
I never used CM7 or any custom rom.
I had 20s flashed via kdz.
I'm root. I installed ClockWorkMod recovery 4.0.0.5 and made clean cache, wipe dalvik etc.
I installed CM10 from zip (it only took a few seconds!) and rebooted. It showed two LG logos and never passed that.
I kept reading and saw this thread so I used smartflash to go back to FROYO, rooted, installed CWM and installed the last CM7 nightly (only a few seconds!) and rebooted.
All I get is a static LG logo and nothing else. I don't know what to do!
Thanks and sorry about my english!

1. NvFlash to 10b
2. Smart flash to latest stock ROM for your country
3. Rooted
4. Install ROM manager
5. After install ROM manager, open it
6. Install CWM v.6 through ROM manager
7. Boot into recovery
8. Wipe data, wipe cache, wipe dalvik-cache, wipe battery stats
9. Install latest cm10 nightly through install zip from SD card
10. Install gapss through install zip from sd card
Sent from my LG-P990 using xda app-developers app

ardiade said:
1. NvFlash to 10b
2. Smart flash to latest stock ROM for your country
3. Rooted
4. Install ROM manager
5. After install ROM manager, open it
6. Install CWM v.6 through ROM manager
7. Boot into recovery
8. Wipe data, wipe cache, wipe dalvik-cache, wipe battery stats
9. Install latest cm10 nightly through install zip from SD card
10. Install gapss through install zip from sd card
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
How do I install Nvflash? I have found tutorials for it but they are for the g2x. Will it still work?

I bought an o2x to replace my sgs1 which is great with cm10.
My story:
Phone was used and bone stock with froyo and 725bb
Rooted
Installed rom manager then flashed cwm 6.0.1.5 from rom manager
wiped everything
installed latest CM7
usb mass storage stopped working (was working with stock froyo)
copied latest cm10 nightly and gapps to an sdcard
wiped again
flashed cm10 and gapps
now I'M stuck on cyanogenmod logo and the lower buttons are lightning
repeated the process few times and still stucked at cm logo
Any ideas? Thanks!
*Update* Removed the battery and restarted the phone and now it seems to be working!

Probleme With AOKP rom

Hi all .. First thx for the Amazing Forum
Well I installed the AOKP rom on my galaxy mini everey things went right until rebooting the system
the phone stay repeating the bootanimation without turning ON
Plz Help Me I'm n**b

Go to cwm, wipe cache and dalvik, reboot. If it doesn't help reflash ROM or restore backup.

yackovsky said:
Go to cwm, wipe cache and dalvik, reboot. If it doesn't help reflash ROM or restore backup.
Click to expand...
Click to collapse
I tried to wipe cache and dalvik .. didn't work
i'll try to flash it to android 2.3.6 by odin & reinstall the aokp rom
thx for reply

still having the same problem

Err... you don't need to flash stock ROM again... just do a clean install of aokp... or any other ROM if it gives you trouble

yackovsky said:
Err... you don't need to flash stock ROM again... just do a clean install of aokp... or any other ROM if it gives you trouble
Click to expand...
Click to collapse
I installed CM10 .. thx for help ... i think there is a problem in the new version of AOKP

There's no problem for me are you sure you've got the latest?

you wiped cache and dalvik cache
but you will also need to wipe data

dheeraj (dhlalit11) said:
you wiped cache and dalvik cache
but you will also need to wipe data
Click to expand...
Click to collapse
I try it too But Still having the problm
Anyway Thx all I installed the cm10 now and it worked pretty cool

Ace bootlooping with all cyanogenmod roms

I own a Samsung Galaxy Ace S5830 running on android 2.3.6 with build number GINGERBREAD.DDKQ8.I successfully rooted my device(SU icon in the app drawer), flashed cwm5.0.2.6 with no error.
I flashed gingercruzt 2.2, cm 7.1,7.2,9,10 with the following instructions:
1) Wipe data/factory reset
2) Wipe cache partition
3) Under advanced, wipe dalvik cache
4) Flashed the rom.
After rebooting for the first time, this happens(for every rom I tried):
The phone boots into the rom(the capacitive buttons get turned on) -> setup window is reached -> then the phone starts booting again->in further boots it reaches cm logo only and keeps on booting again and again.
I tried wiping data, cache partition, dalvik cache and reboot. None of it worked.
I flashed the roms again .But still stuck at bootloop.
Ps : I randomly took my sim out and did a complete wipe and the roms work fine!!!.
But with sim again, the same problem persists.
PLEASE HELP.THANKS IN ADVANCE.

If you have installed any custon rom previous than i suggest you to first flash fresh ddkq8 stock and than try to install ur custom rom..
It might be happening because of previous rom data !
Sent from my GT-S5830 using xda app-developers app

gb2793 said:
I own a Samsung Galaxy Ace S5830 running on android 2.3.6 with build number GINGERBREAD.DDKQ8.I successfully rooted my device(SU icon in the app drawer), flashed cwm5.0.2.6 with no error.
I flashed gingercruzt 2.2, cm 7.1,7.2,9,10 with the following instructions:
1) Wipe data/factory reset
2) Wipe cache partition
3) Under advanced, wipe dalvik cache
4) Flashed the rom.
After rebooting for the first time, this happens(for every rom I tried):
The phone boots into the rom(the capacitive buttons get turned on) -> setup window is reached -> then the phone starts booting again->in further boots it reaches cm logo only and keeps on booting again and again.
I tried wiping data, cache partition, dalvik cache and reboot. None of it worked.
I flashed the roms again .But still stuck at bootloop.
Ps : I randomly took my sim out and did a complete wipe and the roms work fine!!!.
But with sim again, the same problem persists.
PLEASE HELP.THANKS IN ADVANCE.
Click to expand...
Click to collapse
Problem could be your simcard? How is that even possible. Try flashing with your sim out then insert it after the rom is installed.

SuperAce609 said:
Problem could be your simcard? How is that even possible. Try flashing with your sim out then insert it after the rom is installed.
Click to expand...
Click to collapse
I tried this after discovering the sim "problem" but it didn't work out.

bhumit22 said:
If you have installed any custon rom previous than i suggest you to first flash fresh ddkq8 stock and than try to install ur custom rom..
It might be happening because of previous rom data !
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
When i flashed my first custom rom(cm 7.1), i was on fresh ddkq8 stock rom. But the problem still occured.
Though i will give it a try again.

gb2793 said:
When i flashed my first custom rom(cm 7.1), i was on fresh ddkq8 stock rom. But the problem still occured.
Though i will give it a try again.
Click to expand...
Click to collapse
It would be a great advisable idea if you flash stock rom via odin every time when you want to switch from one cusom rom to other...
Sent from my GT-S5830 using xda app-developers app

bhumit22 said:
It would be a great advisable idea if you flash stock rom via odin every time when you want to switch from one cusom rom to other...
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
as told by you, I flashed stock rom and then rooted my phone, installed cwm and then flashed cm9.
I am still stuck on the boot loop...
PLZ HELP

gb2793 said:
as told by you, I flashed stock rom and then rooted my phone, installed cwm and then flashed cm9.
I am still stuck on the boot loop...
PLZ HELP
Click to expand...
Click to collapse
Did you mount the /system? Sometimes you have to do this.
Boot into CWM, mounts and storage > mount /system
Check to see that everything is mounted, sd-ext may or may not work, don't worry about it, it's a big in most CM9 ROMs

[q] missing system ui and camera buttons after flashing stock german jb rom

No notification panel, no task manager, no buttons in camera after flashing stock German jb rom on rooted stock ics(Indian rom) using pc Odin...what could have gone wrong?

Flash philz kernel.
Reboot into recovery and wipe data cache and dalvik.
You should be good.
If not wipe data cache dalvik system preload and .androidsecure in Philz and then ref lash ROM in PC Odin.
If you continue to have problems after that then post back.
Please hit thanks If this helped.
Sent from my Samsung Galaxy SIV using Tapatalk 3

Is it necessary to flash philz kernel or should I just clear dalvik and data cache...then reflash ??

kanishkgaur said:
Is it necessary to flash philz kernel or should I just clear dalvik and data cache...then reflash ??
Click to expand...
Click to collapse
No, try first with cleaning cache and dalvik cache. Reboot and check again.
If cache cleaning doesn't help then you might try reflashing it.

You should flash philz before any wipes.
You said yoiure on rooted stock...as in stock kernel too, no?
Sent from my Nexus 7 using Tapatalk 2

why not do a clean install of JB by formatting system and data partitions