phone died yesterday and every charger that i use will not charge it up. the green light comes on for about 10 seconds and then goes off. sat on charger all night and it still will not turn on. any help will be greatly appreciated.
Have you used the original charger? And let it sit for a couple hours?
Sent from my PACMAN MATRIX HD MAXX
Don't have the original charger. Using a art micro USB cable with a Samsung wall brick 5v at 1a.
Sent from my Desire HD using xda app-developers app
Well this phone doesn't like anything but a factory charger if it dies.
Sent from my PACMAN MATRIX HD MAXX
Don't have access to one at the moment. Guess I will have to order one.
Sent from my Desire HD using xda app-developers app
It seems that it does...
deeje00 said:
Well this phone doesn't like anything but a factory charger if it dies.
Click to expand...
Click to collapse
My Atrix HD doesn't seem to care what charger I use. It died on me this morning after 34hours (MAXX battery) and I am charging it up using a Blackberry 700ma charger (slow but works). I have drained it to death and charged it up via USB from laptop too. Not saying that its not possible for it to be "locked" to a factory charger, just saying that it seems not all of them are.
Is this the charger I need http://www.ebay.com/itm/New-Origina...remium-Home-Wall-Travel-Charger-/150956867162
Sent from my Desire HD using xda app-developers app
It could work, but remember the stock charger is a USB cable with an outlet block
sent from my PACman Atrix HD
http://item.mobileweb.ebay.com/viewitem?sbk=1&nav=SEARCH&itemId=261210636152
This
Sent from my PACMAN MATRIX HD MAXX
deeje00 said:
http://item.mobileweb.ebay.com/viewitem?sbk=1&nav=SEARCH&itemId=261210636152
This
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
thanks i will get these order tomorrow. sucks not having my phone
Didn't even think of this till now. This is an ever better idea to make sure the phone isn't just bricked some how.
http://item.mobileweb.ebay.com/viewitem?itemId=251034201342&cmd=VIDESC
Sent from my PACMAN MATRIX HD MAXX
Related
Quick question. Before I purchase a charger for the kindle fire had I was wondering if it was ok to use one from a different device such as a cell phone. I have 5-6 different wall chargers that would work and I would hate to waste money if those would be ok and not harm my new device. Thanks
Sent from my Kindle Fire HD using Tapatalk.
Any charger will work fine, provided it has a micro usb connector of course.
Sent from my KFTT using xda premium
Thank you very much.
Sent from my Kindle Fire HD using Tapatalk.
Some chargers are more powerful than others, just keep that in mind.
I did the EB40 Mod on my Motorola Atrix HD and I noticed today that my battery was at 46% and all of a sudden it said 4% and that I needed to charge it. Does any mod or anyone know how to fix this problem I am extremely new to android and I would really appreciate any help I did manage to root my phone if that helps. Thank You :angel:
Need to get the battery to 0 and charge the phone to 100 with it off on the charger that came with the phone.
Sent from my PACMAN MATRIX HD MAXX
deeje00 said:
Need to get the battery to 0 and charge the phone to 100 with it off on the charger that came with the phone.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
Ok just to be sure discharge the phone till it turns itself off and charge it while its off all the way till 100.
Yup exactly.
Sent from my PACMAN MATRIX HD MAXX
deeje00 said:
Yup exactly.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
It finally turned off and it shows a battery at 7% just that is there a specific way to charge it?
Do I plug it in as im turning it off or simply how?
Just once it dies try to to turn it on to make sure its dead and if it won't turn on plug it in and leave the phone off till it says 100.
Sent from my PACMAN MATRIX HD MAXX
deeje00 said:
Just once it dies try to to turn it on to make sure its dead and if it won't turn on plug it in and leave the phone off till it says 100.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
Have you ever gotten any overheating issues?
Its gotten a little warm a couple of times but only when I was backing up doing a wipe and installing a new rom.
Sent from my PACMAN MATRIX HD MAXX
deeje00 said:
Its gotten a little warm a couple of times but only when I was backing up doing a wipe and installing a new rom.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
has your phone warned you that its overheating via a message displayed on screen?
Nope. Never seem that. And I have a otterbox defender on it.
Sent from my PACMAN MATRIX HD MAXX
deeje00 said:
Nope. Never seem that. And I have a otterbox defender on it.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
the recalibration of the battery didnt work right... is there a special way or video I can see on how to do it exactly because i did it like you said.. also is there some kind of battery app or rom i can use?
deeje00 said:
Nope. Never seem that. And I have a otterbox defender on it.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
the phone still doesnt calibrate the new battery, is there any other way or program that can help my phone is rooted if that help..thank you
https://play.google.com/store/apps/details?id=com.nema.batterycalibration
Sent from my PACMAN MATRIX HD MAXX
deeje00 said:
https://play.google.com/store/apps/details?id=com.nema.batterycalibration
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
Have you ever had any problems calibrating your battery? I still cant get it to work
Nope. Mines been working fine for 6 months and through dozens of rom flashes.
Sent from my PACMAN MATRIX HD MAXX
Anybody have both? I have this case and just ordered my eb40. Its already a tight fit so has anyone used both fine?
Sent from my MB886 using xda premium
Yes. I had to cut a square out in the rubber though the size of the battery.
Sent from my PACMAN MATRIX HD MAXX
I have it, I didn't cut out a square like deeje though. Its just a TIGHT fit. Don't plan on taking this case off a lot.
Sent from my mb886 using Tapatalk 4 Beta
Now that I have the battery is there a proper way to calibrate it?
Sent from my Atrix HD using xda premium
Once you install it charge it to 100 while the phone is off. Then run it dead and do it again.
Sent from my PACMAN MATRIX HD MAXX
My phone automatically turns on when plugged in. How can I make it not do this? Even it I turn it off plugged in it just reboots. Also when it turns on it flashes the Motorola logo then goes to some gray fuzzy screen. What is that all about?
Sent from my Atrix HD using xda premium
Semborski said:
My phone automatically turns on when plugged in. How can I make it not do this? Even it I turn it off plugged in it just reboots. Also when it turns on it flashes the Motorola logo then goes to some gray fuzzy screen. What is that all about?
Sent from my Atrix HD using xda premium
Click to expand...
Click to collapse
First plug in, then turn off device.
For me only oem motorola charger doesn't turn on device and just charges it, other chargers turn device on, I've tried several from different devices...
I just installed eb40 yesterday and I'm not happy with its performance... I have attached my battery stats here. Is there a way to check capacity of the battery to make sure it is not defective?
Aingaran said:
I just installed eb40 yesterday and I'm not happy with its performance... I have attached my battery stats here. Is there a way to check capacity of the battery to make sure it is not defective?
Click to expand...
Click to collapse
Perhaps you should wait a few days so you can compile the stats and then decide if your battery is defective.
It definitely shouldn't dip like that. Did you calibrate it correctly.
Sent from my PACMAN MATRIX HD MAXX
deeje00 said:
It definitely shouldn't dip like that. Did you calibrate it correctly.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
Yup, I did calibrate... But it is quite a heavy use... My stock battery only lasts for 3 hrs on that use...
Sent from my Atrix HD using xda app-developers app
What the hell do you do to it.
Sent from my PACMAN MATRIX HD MAXX
3 hours how?
not even looping hd video over wifi with max brightness would let my eb20 quit in 3 hours
deeje00 said:
What the hell do you do to it.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
Help me out to callibrate the battery and to get max out of eb40... Also suggest a best battery friendly rom...
Mister_Simon said:
3 hours how?
not even looping hd video over wifi with max brightness would let my eb20 quit in 3 hours
Click to expand...
Click to collapse
Sent from my Atrix HD using xda app-developers app
Aingaran said:
Help me out to callibrate the battery and to get max out of eb40... Also suggest a best battery friendly rom...
Sent from my Atrix HD using xda app-developers app
Click to expand...
Click to collapse
Let it fully discharge. Run Movies/Netflix till it just dies then let it charge to max (use the wall charger for this).
Battery Friendly Rom.....they don't make those for us.
skeevydude said:
Let it fully discharge. Run Movies/Netflix till it just dies then let it charge to max (use the wall charger for this).
Battery Friendly Rom.....they don't make those for us.
Click to expand...
Click to collapse
^haha very true. The best rom battery wise that I've tried is Younggun's HoloBlur (feel free to correct me)
Sent from my MB886 using xda premium
I'm using the holoblur ROM ATM and I'm getting good results with my battery life. I'd recommend it also.
I just flashed CyanogenMod 10.2 and it won't charge anymore I know the charger works because I can connect it to any other device it'll charge.
if its the pacman build i had this same problem..
the battery was actually draining down while connected to the pc.
maybe try a different rom..
PROBAM Rom have many of those bugs taken care of which you can try
Sent from my MB886 using XDA Premium 4 mobile app
The phone is dead now anything I can do?
Is your phone bootloader unlocked?
Have you tried charging it with phone off?
The only thing I can think of trying is going to fastboot and and go back to stock but i think you need at least 40% of battery
Sent from my MB886 using XDA Premium 4 mobile app
Are you using the original charger that came with the phone? If not, try using that one or a more powerful unit.
OK so the fun is dead there is only a green light on I can't boot into anything and I'm using the charger that comes with the Nexus 7
Rafa2745 said:
OK so the fun is dead there is only a green light on I can't boot into anything and I'm using the charger that comes with the Nexus 7
Click to expand...
Click to collapse
Only thing I can suggest is using the original charger that came with the phone. I recall reading posts from other users that could get their phone to charge by using the usb cable and charger that came with their phone.
If its dead and will not respond to a cable (original Motorola cable plugged into wall) , you may have to invest in a Factory Cable and let it charge in the bootloader so you can RSD a stock ROM.
Sent from my MB886 using xda app-developers app