[Q] CWM recovery loop, stock ROM - Samsung Galaxy Mini

Tried ROM Manager backup of factory ROM.
Now, I power on and get CWM recovery. Choosing reboot always returns me
to CWM recov. I read every thread in this forum that refers to
loop, brick, etc. I have various backups, but I don't know what they
are worth, best way to use them. How to get out of the boot loop?
Best outcome would be to recover my last stable state. Factory reset
would be ok. Hardbrick would be a drag.
* Bought factory unlocked G-ST6500D (no vendor) in Spain.
* Have current non-root backups of contacts, sms, media, calendar, etc. on
laptop.
* Installed CWM v5.0.2.8 with Odin (three yellow boxes appeared in odin,
FWIW), and rooted. Froze bloatware listed by some people as safe, but
did not delete any factory installed software.
* Wanted to have a stock ROM backup before I did anything else. It's
not clear to me whether it is best/possible to download one or create
an image from my device. Started reading/trying backup apps, but I
don't really know what each one does.
* Did a full backup, apps + data, to extSD, and copy to laptop with Titanium
backup (free). This wrote >1000 files.
* Did most complete (as best I could tell) backup to extSD and laptop
with Online Nandroid app. This wrote boot.img, cache.ext4.tar,
data.ext4.tar, nandroid.md5, recovery.img, system.ext4.tar. Can these
be used to restore ?
* Tried to backup the ROM with ROM Manager app, but could not find an
option to backup to ext SD, only int SD. There was only 200MB free, so
I knew this would fail. I choose this anyway, hoping it would realize
there is not enough space and offer to change the path. The phone
rebooted into CWM and began a backup. After a few minutes, it printed
an error message and told me where a log was written, and rebooted
into CWM recovery. I tried rebooting, holding buttons, removing
battery, etc. Always returns to CWM recovery. Tried the 'backup and
restore' menu hoping it would give info on the backup. Instead, it
immediately started another backup, this time showing 1GB intSD
free. This backup reported success, then reboot into CWM recov.
* Since then, from CWM, I did 'wipe cache partition' and 'wipe davlik
cache'. Did not yet try factory reset.
* Show log ends with
"skipping exectuion of extendedcommand, file not found"
I read that sometimes it is possible to exit a boot loop without
flashing anything. If that is not possible, I guess I should do
factory reset. If that does not work, then I guess I should try
restoring something somehow: Use CWM recovery to recover nandroid
backup from extSD? Or install something via Odin ? For any solutions,
I am more comfortable doing things from linux than MSWin, but I think
that is not possible. Do I have to race to solve this before the
battery runs out?
Thank you for reading.

just install cwm 6.0.3.3 b2 from TheWhisps goo.im account and then should everything work fine.

midzan21 said:
just install cwm 6.0.3.3 b2 from TheWhisps goo.im account and then should everything work fine.
Click to expand...
Click to collapse
Thanks. I just figured that out after a several hours of reading. Finally saw stories on the thread
introducing CWM 6.0.3.3 of people who never flashed a ROM and still had boot loops.
I was on the wrong track because I assumed it was the filled up int. SD causing the
problem. I still have to fix that, but my phone is running. It would be nice if ROM Manager or CWM calculated the space
needed and refused to start if insufficient. But, I understand that there are few good devs and much to do.

Related

[Q] Rooting/ CM6 flash last check

As rooting has become so easy these days I am considering to try custom roms (as many hv done lately). I hv read alot since the root with unlocking the bootloader method came out. I am still on stock FRF91 and I'd like to keep my apps and data intact. CM6-RC3 has just released and I m so tempted to try!
Here is the proposed routine:
"Originally Posted by cicrockets"
0. Download the CM6-RC3 ROM with the gapps and put them on SD Card.
1. Plug in the power cable and root using the 1-click root.
2. Back up apps and data with Titanium Backup / MyBackupPro (which is better?)
3. Search for ROM Manager on Market and Install
4. Click the "Flash ClockworkMod Recovery" and wait until the progress bar is finished.
5. Reboot and do a Nandroid backup.
6. Open ROM Manager and "Install ROM from SD Card".
7. Add Zip:
i) update-cm-6.0.0-N1-RC3-signed.zip
ii) gapps-hdpi-20100814-signed.zip
8. When it prompts, choose to backup before flashing and give the backup a name like "Stock N1 Rooted". Also choose to clear data and dalvik-cache.
9. Wait. It'll reboot and go into the clockwork recovery and automatically queue and flash the two zips. Keep waiting until it reboots again.
At this point the phone should hv booted into CM6. Should I do the restore from the backup apps immediately? Or should I wait for 10-15min market sync?
My major concern will be the data. Is there any problem with the above routine? Please bear with me
Technically that is the way to do it. But some people say that they get issues when restoring titanium backups for certain apps and data. So keep that in mind.
Yeah I read about that too. They said it can be fixed by doing an advanced restore, right? Will u recommend MyBackUpPro instead?
Thanks!

[Q] CM7 to Miui

So I was able to successfully install CM7 on my new NC last week and got it just the way I want it. Now I would like to try Miui. I have never used Rom Manager (not working on the Epic), and would like to know how to go back and forth using that app.
Can someone break it down so I can follow along painlessly?
ROM manager is nice for doing incremental updates. What you want to know how to use is clockwork mod.
I'm in the car ATM, but I'll be at my computer in 15 or so. I'll write up what you need.
Sent from my Vortex using Tapatalk pro
OK, first turn on wifi. Then, from within Rom manager check and make sure you have the latest Clockworkmod flashed.
at the top it will say 'current recovery' if that's 3.2.0.1 then you're good, if not, select 'flash Clockworkmod'
if you get a selection between old and new, select new.
Now would be a good time to make a directory on your SD-card called 'ZIPS' and put the .zip files of whatever rom you want to flash.
CM7 nightlies
MIUI
And, you'll want to pickup the Gapps (google applications) zip from here
Clockworkmod is a recovery program. It is able to boot ahead of anything else and has access to every partition. From within clockwork mod you're able to do system level backing up, restoring, or just plan changing. I'll give you the run down on flashing different roms.
To boot Clockworkmod just turn off the nook, then hold the [pwr]+['n' button] until you see the text 'booting into recovery' release the buttons.
Now within clockworkmod [vol+] is up, [vol-] is down, ['n' button] is select, and [pwr] is back.
First we need to backup your current data. With this backup you will be able to restore to that EXACT time and setup. Make as many as you want, feel free to rename then to keep track.
->backup and restore->Backup
The backup is saved to the SD-card in the Clockworkmod folder
Then we need to wipe all that uncool old data from the emmc. Pick one, not both.
Scenario #1: upgrading versions of the SAME ROM
->mounts and storage->unmount /cache
->mounts and storage->format /cache
->advanced->wipe dalvik cache
Scenario #2: SWITCHING from one type of ROM to another
->mounts and storage->unmount /cache
->mounts and storage->format /cache
->mounts and storage->format /data
->mounts and storage->format /system
->advanced->wipe dalvik cache
->wipe data/factory reset (a little redundant, but it can't hurt)
Now to install the new ROM or ROM version
->install zip from sdcard->choose zip from sdcard->ZIPS/->ROM file
->install zip from sdcard->choose zip from sdcard->ZIPS/->Gapps file (should look something like this: gapps-gb-20110613-siged.zip)
After you've installed a new update of a ROM or a new ROM you'll have to fix the permissions.
->advanced->fix permissions
Reboot and you're done.
This should cover all of your flashing needs. If I missed something please point it out. If something doesn't work just post it, someone will know.
Awesome breakdown! Now to get apps back, do I need to use titanium or can I go to restore in CWM and do it that way?
Thanks again, that was very useful!
I seem to remember that titanium backup's app data restore does not work for CM7, only restoring the app itself works.
The restore in CWM will REVERT you back to when you backed up, undoing everything you've done since.
I can confirm that Titanium backup does work in CM7 I use it all the time to restore apps and data.
It also worked after I installed Miui. Batch restored all of my apps and data, no FC's.
Glad to hear it worked ok for you.

[Q] Phone won't boot after Ultimate JB ROM Upgrade

Can anyone please help?
I just installed the Ultimate JB ROM XXLSA 4.1.2 v5 upgrade on top of v4.
All went perfectly well and I was able to enter all my setup and account details after the initial boot of the phone.
When I tried to re-install apps from Google Play, however, (Titanium Backup Pro, Quickboot) the phone hangs at the Samsung Splash screen and won't go any further. I re-tried the procedure 3 times but each time the result is the same.
Can anyone tell me what the problem could be? I followed all the instructions about wiping etc. correctly.
Trevor
v4 and v5 use completely different bases (LS7 and LSA).
I would save everything to my ext SD card.
Then goto Settings > Backup & Restore > Factory Reset (don't click on format external sd card).
Your phone will restart and do some crazy things. Then restart again.
When you get to the welcome page, or bootloop... take the battery out (its safe).
Then hold Vol Up, Home and Power (let go of Power after ~5-15sec) and goto recovery.
In recovery, wipe cache.
Then format data.
Then format system.
Then format cache.
Then wipe Dalvik cache.
Then install the v5 zip.
It shouldn't restart automatically, but it might, don't worry let it.
Now you should have a fully, fresh, clean install of v5.
Connect to your wifi, go through the start up.
Goto SuperSU and update binary.
Goto Play Store and install TiBu.
Open TiBu and grant it root access.
Close TiBu.
Connect phone to PC, then copy your TitaniumBackup folder into your sdcard directory.
Open TiBU and now, it will see your previous saves.
Restore your apps + data.
Presto! No bootlooping and no App FC !
Thanks for going to all the trouble to write all that out.
I followed the instructions to the letter but no, same result I'm afraid: it worked fine but as soon as I installed Titanium and granted root access, it asked me to choose to restore the original phone ID which I did. The phone rebooted but then wouldn't go past the "Samsung Galaxy Note Gt-N7000" screen.
I have no choice but to restore from my Nandroid backup. This is really p****ng me off but at least I can restore v4 easily.
Thanks again
Trevor
Kangal said:
v4 and v5 use completely different bases (LS7 and LSA).
I would save everything to my ext SD card.
Then goto Settings > Backup & Restore > Factory Reset (don't click on format external sd card).
Your phone will restart and do some crazy things. Then restart again.
When you get to the welcome page, or bootloop... take the battery out (its safe).
Then hold Vol Up, Home and Power (let go of Power after ~5-15sec) and goto recovery.
In recovery, wipe cache.
Then format data.
Then format system.
Then format cache.
Then wipe Dalvik cache.
Then install the v5 zip.
It shouldn't restart automatically, but it might, don't worry let it.
Now you should have a fully, fresh, clean install of v5.
Connect to your wifi, go through the start up.
Goto SuperSU and update binary.
Goto Play Store and install TiBu.
Open TiBu and grant it root access.
Close TiBu.
Connect phone to PC, then copy your TitaniumBackup folder into your sdcard directory.
Open TiBU and now, it will see your previous saves.
Restore your apps + data.
Presto! No bootlooping and no App FC !
Click to expand...
Click to collapse
Mystery solved - well partly. Turns out Titanium Backup Pro was causing it on my phone for some reason. This was naturally the first app I wanted to install so I could restore apps one by one from the Nandroid backup. I tried Quickboot too which also caused the same problem so because TB and then QB did the same thing I assumed every app was going to cause trouble. Shouldn't jump to conclusions, I know.
I have JB Ultimate XXSLA v5 installed and am restoring my apps one at a time from Google Play and making new Nandroid backups as I go along.
And now I just tried installing TB free version - the phone boots normally! Then I installed the TB Pro version and again the phone boots normally. When TB was the first app I installed after the ROM upgrade it hung up the phone every time on 6 attempts. I'll try re-installing Quickboot now and see what happens. Conclusion: I must have been doing something in the wrong sequence but can's see what.
Many thanks for your help.
Trevor
sacentre said:
Thanks for going to all the trouble to write all that out.
I followed the instructions to the letter but no, same result I'm afraid: it worked fine but as soon as I installed Titanium and granted root access, it asked me to choose to restore the original phone ID which I did. The phone rebooted but then wouldn't go past the "Samsung Galaxy Note Gt-N7000" screen.
I have no choice but to restore from my Nandroid backup. This is really p****ng me off but at least I can restore v4 easily.
Thanks again
Trevor
Click to expand...
Click to collapse

[Q] i897 dont boot

I have Samsung i897 Captivate (i9000) with SlimICS 4.1.1 Cyanogenmod installed.
Yesterday morning I've found, that my phone is repeatedly show me boot screen (video on boot with many blinking pieces/elements colors shown to me), but did not load an Android at all. I've tried to reboot the phone (with battery eject), but nothing changes: phone shows start-up animations repeatedly.
Last my action evening before was setting alarm (usual task that I've done for one year probably). Dont know what reason to reboot was, maybe no free space available, but dont sure. Before this problem with load I have no problems with phone at all.
I have Clockworkmod installed, but there's no options to boot an Android in safe mode or some similar options. I could get access to the internal phone memory, but not for system partitions. I've tried to wipe dalvik/cache, fix permissions, but no changes at boot.
So could you gents help me to get access to the filesystem: I have memo's & uncynchronised contacts & SMS, which I would like to save before do anything. I know how to reinstall the system (I have backup for it, but not for contacts & memo's).
Thanks.
kalabazoo said:
I have Samsung i897 Captivate (i9000) with SlimICS 4.1.1 Cyanogenmod installed.
Yesterday morning I've found, that my phone is repeatedly show me boot screen (video on boot with many blinking pieces/elements colors shown to me), but did not load an Android at all. I've tried to reboot the phone (with battery eject), but nothing changes: phone shows start-up animations repeatedly.
Last my action evening before was setting alarm (usual task that I've done for one year probably). Dont know what reason to reboot was, maybe no free space available, but dont sure. Before this problem with load I have no problems with phone at all.
I have Clockworkmod installed, but there's no options to boot an Android in safe mode or some similar options. I could get access to the internal phone memory, but not for system partitions. I've tried to wipe dalvik/cache, fix permissions, but no changes at boot.
So could you gents help me to get access to the filesystem: I have memo's & uncynchronised contacts & SMS, which I would like to save before do anything. I know how to reinstall the system (I have backup for it, but not for contacts & memo's).
Thanks.
Click to expand...
Click to collapse
The I9000 and the I897 are 2 different phones. I9000 is the international version of the Captivate, therefor, if you flashed the I9000 bootloaders on a I897 Captivate, you'll have distorted colors/screen.
What exactly was done to the phone before this happened?
Pardon, I have AT&T i897 Captivate phone. I did not flashed, nor updated phone, nothing similar, that could affect phone booting process. Just set an alarm (default, from Clocks), then go sleep. In morning found that my phone stuck in boot process - it show boot-up animation but don't load OS.
kalabazoo said:
Pardon, I have AT&T i897 Captivate phone. I did not flashed, nor updated phone, nothing similar, that could affect phone booting process. Just set an alarm (default, from Clocks), then go sleep. In morning found that my phone stuck in boot process - it show boot-up animation but don't load OS.
Click to expand...
Click to collapse
Have you tried re-flashing the ROM (Without factory reset)? Wipe cache and dalvik.
BWolf56 said:
Have you tried re-flashing the ROM (Without factory reset)?
Click to expand...
Click to collapse
No, I'm no so clean understand reflashing process, so worry to lost my data (I know that my contacts lie here - /data/data/com.android.providers.contacts , but can't found where memo's saved). I could choose "Restore /system" from
"Backup & Resore -> Advanced" in CWM, you mean this?
BWolf56 said:
Wipe cache and dalvik.
Click to expand...
Click to collapse
Yes, did it, but no changes at boot at all (wait there >10 minutes).
kalabazoo said:
No, I'm no so clean understand reflashing process, so worry to lost my data (I know that my contacts lie here - /data/data/com.android.providers.contacts , but can't found where memo's saved). I could choose "Restore /system" from
"Backup & Resore -> Advanced" in CWM, you mean this?
Yes, did it, but no changes at boot at all (wait there >10 minutes).
Click to expand...
Click to collapse
Reflashing your ROM won't touch your data as long as you don't wipe/factory reset. It's what we call a dirty flash, you just wipe cache/dalvik and flash your ROM again with the Gapps.
Thank you for the way to resolve the problem. Spend some time to understand the process of reflashing. Now I collected all files (bootloader, ROM, essentials, gapps and so on of my actual setup) and ready to reflash it with Heimdall.
But still have a question: is there any possibilities to get access to filesystem (for maybe just copy all files from system partitions into Big Brother) before take action in my case?
Will I get access to my contacts & memo's after reflashing? As I understand, if I reflash phone, /data & /datadata partitions (as part of freshy ROM reinstall) will be touched too, then I lost as minumum link to the Wizard Memo (and I'm not sure that installing it from Google Play will restore access to my memo's).
As you could realise, I have no actual backup of my data, so asking maybe dumb questions (
Could I simple use Clockwork's mod option "Restore /system" & "Restore /data" (as I have it in almost fresh backup - 2 months ago)? Will it be analogue to reflashing? Or it revert /system and /data to the stage when it was make, with contacts, programs and so on with 2 months ago state, not current?
kalabazoo said:
Thank you for the way to resolve the problem. Spend some time to understand the process of reflashing. Now I collected all files (bootloader, ROM, essentials, gapps and so on of my actual setup) and ready to reflash it with Heimdall.
But still have a question: is there any possibilities to get access to filesystem (for maybe just copy all files from system partitions into Big Brother) before take action in my case?
Will I get access to my contacts & memo's after reflashing? As I understand, if I reflash phone, /data & /datadata partitions (as part of freshy ROM reinstall) will be touched too, then I lost as minumum link to the Wizard Memo (and I'm not sure that installing it from Google Play will restore access to my memo's).
As you could realise, I have no actual backup of my data, so asking maybe dumb questions (
Could I simple use Clockwork's mod option "Restore /system" & "Restore /data" (as I have it in almost fresh backup - 2 months ago)? Will it be analogue to reflashing? Or it revert /system and /data to the stage when it was make, with contacts, programs and so on with 2 months ago state, not current?
Click to expand...
Click to collapse
I guess i wasn't so clear. What I mean by reflashing is to simply get in recovery mode and reflashing RemICS and their Gapps. Not to start fresh with stock.
Sent from my SGH-I747 using xda app-developers app
You explained well, errors on my side Resolved this issue with copying all data from filesystem, then reflashing with fresh slimrom . For those who fall into same situation: you could get access to filesystem of your phone trough ADB tool, and just copy sensible data to another partition/SD/device. See QtADB program also, very friendly for that.

TWRP Backup/Restore ERROR 255

I don't think this is a Moto X (XT1096) specific problem, but more so with TWRP. Phone works fine, just can't backup or restore
I'll try to get a log as soon as I can, just need to figure out how
Problem
I can't backup or restore (and maybe can't delete via TWRP?) from TWRP, getting errors at the start (can't access .../data/cmthemes and can't access .../data/motogallery) and then at the end TarFork() process ended with ERROR=255
Tried Solutions
Reflash TWRP (broke, had to use TWRP app to fix)
Upgrade TWRP (says it failed, but worked)
Enable Compression (no real difference that I can tell)
Cause?
I was on CM13 (2/2 ?), upgraded to most recent (2/6), didn't like it so wiped and flashed to original (1/29 ?) then restored backup (2/2). Probably wasn't the best way to do that, oops. Since then I have wiped and reflashed 2/2 and upgraded to 2/7, haven't done anything since (besides mess with TWRP)
Any help or ideas would be appreciated!
Please lock/delete
Solution: Factory reset, only method that worked for me
Be sure to clear cache
Solution: There is a file on the phone that is preventing the backup. Not sure what is creating it. It could be an artifact of a TWRP backup restoration, which is the first time I had the problem.
Look in the TWRP log ([SDCard]/recovery.log) and scroll near the end - you will find the culprit there, almost always in the [root]/SYSTEM folder but sometimes in multiple folders. It has many names. I've seen it called, simply "999". On my Moto G4, it was "d.addon". Delete the folder and you're good to go.

Categories

Resources