[Q] Odin stuck on setup connection - Galaxy Ace S5830 Q&A, Help & Troubleshooting

I am relativly new here, i now how ti put custom roms, recovery mod etc etc, and that all is fine. Two years ago i bought my ace, and root it, put recovery mod int it i beleive version 5, and all ok, i flashed about 50 custom roms, changed them until found one i liked
Now i got another phone, and my dad has the Ace, but he wants stock rom, dont ask me why
So i said sure why not, get the cable, charged it up, make backup of phonebook, connected it, installed all the drivers on my Windows XP, btw i use Pentium 3 toshiba laptop, cause i cant get drivers to work on Win 8
downloaded a stock rom, 2.3.6 version it is and it is XWKTM
ODIN 4.38 i put the Cooper_v1.0.ops file in, the md5 file, select all 3 options, and connect my phone, put it in download mode, yellow download shows, connect to usb, its original cable, windows detects, i get yellow in odin, and push start, checks md5 all ok, but gets to the setup connection and it can hang there for million years, damn..... ((((((
i changed cables, changed USB ports, reinstalled installed drivers, NOTHING helps.
Any ideas?
Oh by the way, i maybe was a smart wisea*s so, i used this
http://forum.xda-developers.com/showthread.php?t=1437426
to put original recovery mode in ti, hope i was not VERY PRETTY stupid because of this
Now i cant get into the recovery it puts me in some kind of memory ram dump arm9 crap
And btw the customrom inside the phone, works, phone works all functions work, so it is not bricked, atl least not fully.
Im thinking maybe because toshiba laptop has old 1.5 i think USB, not 2.0 so maybe that is the problem, tommorrow i will try on Windows 7 machine a my workplace, if that fails i have no ideas, so any ideas? help?
thanks for reading oh and btw, sorry for bad english, i type with one eye closed and sleepin, while other is on half soooo me make a mistaka

help
i think you should try flashing stock rom on other pc with latest usb drivers with working usb ports and i you have any doubt i can help you anytime just do two things
1 send me a friend request dont worry i will help you cos you can send me private messages after that
2 HIT THANKS BUTTON OF MY POSTS
hahaha
do it now

Related

[Q] Semi-bricked, USB not recognized, doesn't even charge

Hi!
After searching the forums for a while I did not find a thread exactly matching my problem, so if I've overseen it, please just point me there.
To my problem:
I did a very stupid mistake, flashing a new custom ROM with a different kernel (as usual, cooked in Docs Kitchen) without converting back the lagfix. So I ended up with a non-booting phone - so far, so bad. Note to myself: Never flash a phone during the carnival weekend again.
So I booted into download mode and tried to recover it via Odin, but here I got my really bad surprise: USB device is not recognized, thus I Odin does not see the phone.
I tried 4 different PCs with Win7 or XP, a Linux desktop and a Macbook. I also tried 5 different USB cables (they all work with other smartphones like the Desire and the HD2). Wherever I stick the phone in, it is not recognized (code 10/code 43 in Win7). I used the stand-alone-drivers from the sticky forum thread here, and also most recent Kies versions, always the same: USB device not recognized.
Does anybody have an idea how to revive the USB connectivity? I'm almost at the point to send it in for repairs...
Or can someone elaborate how I could have killed USB with corrupting the ROM? I've to admit I do not really understand how these two are connected.
--Jens
Hi Amokbunny
You get into download mode but the PC won't recognize the phone?
That's messy and I can think of nothing that could have done that. you did not change the bootloader did you (flashed a full samsung ROM containing a bootloader, for example VJ1)?
If not I guess it's a hardware issue.
formatted to ext4 without any backup
I did a very stupid mistake too. Got darky's rom 9.3., installed i, everything worked great(really awesome thing), then i wnt to recovry mode and entered tthe speedmod and it showed mr that my phone has rtf files system not EXT4 as it should be, thou i installed the speed mode. then i chose to repartition it to ext4 but i didn't choose the backup. Just clicked to format the sd. It did formatted to EXT4, rebooted, i saw the darky's rom logo and the the phone vibrated and the logog of the droid just flashed. I tried to enter recovery mode-didn't load. Started the download mode connexted to pc used ODIN 1.7 with PDA I9000XXJPY.tar, MODEM I9000XXJPY.tar, GT-I9000-CSC-MULTI-OXAJPY-LITE.tar s1_odin_20100512.pit.
The phone has started, appeared teh stok galaxy s logo and it's just flashing. Help needed. Don,t know what to do know. I have galayx s i9000 european version.
somehow i've managed to install new firmare 2.2.1 /I9000XXJPY-baseband /2.6.32.9 [email protected] #1-kernel version, but z4root isn't working. When i start permanent root the programm ends on aquiring root shell, the debug mode is on
Got it all running, installed Darky's rom 9.3. Thanks anyway.
theduckking said:
Hi Amokbunny
You get into download mode but the PC won't recognize the phone?
That's messy and I can think of nothing that could have done that. you did not change the bootloader did you (flashed a full samsung ROM containing a bootloader, for example VJ1)?
If not I guess it's a hardware issue.
Click to expand...
Click to collapse
Yep, I can boot into download and recovery modes, but that's it.
The only apparent change in the new custom ROM was the kernel.
I also cannot really access my external SD card (it shows me some phantom files, but not the actual content of the SD), otherwise I'd try to recover it this way.
I agree with the hardware issue, if it wouldn't have coincided with the flash procedure...anyway, I think I'll send it in for repairs if I don't get it to run on this sunday.
I have the exact same problem, except that I can access my external SD. I got the problem after upgrading to Darkys Rom 9.3 the usual way, but switched from Speedmod to Voodoo. After that update, my USB didn't work anymore.
I can't get neither Xp or Win 7 to recognize my phone. USB device not recognized, and tried all the tricks. Reinstalling Kies and drivers, switching between the different modes (storage, kies media, ask, debug...) But still no USB connection.
I updated to darkys 9.5 (transferring the rom using bluetooth, and updating using CWM), but still it doesn't work.
Can get it into download mode, but still can't connect using USB and Odin.
HELP!
Did anybody ever find a solution for this?
European version of I9000, bought in Denmark. No Simlock
Same thing here after installing JV1 + Ultibread Rom 1.4... Still no solution
*shameless push*
Any solution here? I dont have that problem, but it sounds too scary to not have a working solution :S
Same prob here! Any news?
Any solution? I have the same problem.
same problem my phone is bricked while flashing a stock rom the windows disconnected the phone while flashing
ended with device not recognized even in download mode
bassem8246 said:
same problem my phone is bricked while flashing a stock rom the windows disconnected the phone while flashing
ended with device not recognized even in download mode
Click to expand...
Click to collapse
But if you are in download mode on your fone you'd rather should have a look at your configuration on the computer. Because the fone still can be flashed if the symbol for download still appears.
- Kies is shut down while ODIN is active?
- latest Samsung USB driver installed?
- Odin started with Admin?
Btw. did you try to get into recovery mode? Maybe this also still is working as the partition is quite small and chance high that it was flashed w/o faults. So you may be able to flash a zipped ROM rather than a tarball for Odin.
USB Not working when Phone plugged in... try these..
Unplug Device from PC..
Windows go to Device Manager...
Scroll down to Universal serial bus Controllers
Start with the top one and work your way down ..uninstall them all..
When done reboot Computer and let it install them all.. then try again
2.Settings --> USB Setings (under wireless & network may differ depending on Rom used) --> Try other settings Mass storage
3.Different USB ports on PC
4.Uninstall KIES from PC (reboot PC to take effect) and Reboot and just install samsung USB drivers....
5.Using windows type in msconfig in Start>Run box... windows will pop up and untick KIES from STARTUP TAB
Apply to take effect and restart machine.. try using ODIN to Flash ROM
I myself only use the Samsung USB drivers and ODIN never use KIES
or ...Check my signature and try SD formatter

[Q] clockwork mod installed but formatted everything stuck no update.zip help plz

I looked through other similiar threads but they are for other phones so i wanted to start this thread to get unstuck with my samsung i897 with clockwork mod installed. I guess im good at learning things the hard way so here i am stuck at the mercy of you guys. this is what i figure i can do to get the update.zip i can put my sd card in a sd card reader then hook it up to my pc then manually copy update.zip to it to get access through the clockwork mod bios then point it to the freshly copied file but the prob is i dont have a usb sd card reader and i have ignorantly formatted everything on my phone so i can boot up only to the clockwork mod bios with nothing for it to work with so can any of you give me a laymens term step by step noobie style walkthru out of the kindness of your heart or pure boredom? thanks and i figue almost bricking my phone is a good way to learn this stuff So am i stuck having to get a sd card reader for my pc then download the update.zip or if there are alternatives to update.zip then id like to know but is this the only way to get me out of this situation of just having the clockwork bios and nothing else? if someone has a quickfix please let me know or point me to some solution please
Flash back to stock with ODIN that will fix your phone.... Why would u format?
Cuz i like to jump the gun before thinking alot of times thats why i learn the hard way most of the time it builds character also i learn stuff that i never wanted to learn but it helps me in the long run.
Carefull jumping the gun will land you with a hardbrick...
Ok I tried the [STOCK ROM] Odin3 One-Click Downloader and Drivers CAPTIVATE ONLY
thread located at http://forum.xda-developers.com/showthread.php?t=731989 and i did it step by step with the mentioned drivers installed and i cant get oden to reconize my phone im in download mode followed the directions to a t with nothin :/ do you have any other ideas?
Is your phone running CyanogenMod or MIUI?
its running the \update-cm-7.1.0-Captivate-signed.zip or it says this when it boots into the custom bios clockwork mod recovery v2.5.1.0 speedmod ulfk and the bios text is in green with the reboot system now options - apply sdcard:update.zip and -wipe data/factory reset and - wipe cach partition and install zip from sdcard and - backup and restore and - mounsts and storage and advanced clockworkmod feautures and - advanced speedmod ulk features and- ********go back******* etc and their subdirectories but thats all i can get because i guess thats all left on my phone . i can get the com recognition when i boot up to recovery mode but not when i boot into download mode which is what i need to be in obviously because i cant get odin to run all the way through in recovery mode it sticks and freezes and this is what i get <ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
Then you need Nexus S drivers. I recommend you also download android SDK while your at it. FYI any AOSP (CyanogenMod, MIUI, etc) use Nexus S drivers.
Ok im trying to reinstall my driver for windows 7 nexus driver u mentioned btw my device is listed as gadget serial under devices and printers ok ive chosen 16_Shrewsbury and trying to update the gadget serial to the shrewsbury driver i keep getting select device - the folder you specified doesnt contain a compatible software driver for your device. if the folder contains a driver, make sure it is designed to work with windows for 32-bit systems and just to let you know the driver file name i downloaded is samsung_driver the one i was using before was SAMSUNG_USB_Driver_for_Mobile_Phones_x86 so it seems i have a tricky aggravating device driver problem that is what makes all this hard in the first place trying to find needle in the haystack drivers when they should be outlined correctly instead of this. but anyway im hanging int their because i have a brick with nothing else so far. thanks agian for your patience in joining in my aggravatiion.
I really can't say. I just use SDK for that. =/ I've never installed any nexus S drivers, but I assume you can grab legit drivers from nexus site.
This is what im going to try now, im going to unistall and try to seek out all the drivers and do away with them i wish there was a samsung driver eliminator program so i can go through the trial and error correct driver thing which i shouldnt be going through because i had the correct drivers before enough to root my phone in the first place this is just crazy but i consistently run across these driver issues when dealing with windows so i should just accept this i how it is and keep plugging at it till i finally have a phone again well if anyone has a miracle answer for me then feel free to relieve my anxiety and bless me with just 1 time a simple fix lol. I guess if this was simple in the first place everyone would be doing it.
When i ran MIUI, the only time i had a driver problem was with adb. Rest if the t time, Samsung drivers worked fine. You could always use heimdall, on Ubuntu (google wubi installer)
im still stuck trying to get odin3 to reconize my device in download mode so i can one click fix my phone back to factory default , the trouble im facing is that i cant seem to get the correct driver ive tried so many different ones and im fighting windows 7 because it keeps putting i9000 or nexus drivers in automaticallly when i unplug the usb and reinsert in to initiate download mode. like i said in an earlier post i wish i had a proggie that could seek out the device drivers and annihilate them so i could start from scractch as yet im trying to find them myself manually and do away with them with not much luck.
Soft Brick Fix - Samsung Captivate
Another "Jump the gunner". That's me in a nutshell.
Here are the steps you will need to take in order to un-brick your phone.
(I have done this so many times, but I have never written a tutorial)
First off, it sounds like you have the wrong drivers installed for your phone. Most computers have more than one use port, and it will attempt to install the driver for the phone for every different port you plug it into. But lets fix the one that you have that's messed up already.
-With your phone in download mode, plug it into the USB port.
-Open control panel, system, then click on device manager in the left column of the window.
-At the bottom of the list you will see "Universal Serial Bus Controllers"
-Expand this list.
-Find the device that is supposed to be resembling your phone. If you don't know the name, you may be able to check by the windows clock for the green circle with the check mark in it, clicking this will tell you what "Ejectable" USB devices are connected.
-Right click the matching device name in the Device manager screen and then click uninstall.
------------------------------------------------------------------------
-Download the correct drivers:
Samsung USB Drivers
(go here, click software, USB driver should be first listing)
-Install the driver from where you downloaded it to.
-Plug in your phone while in download mode.
-Verify that the correct driver has been installed.
------------------------------------------------------------------------
-Open your phone and remove the battery.
-Replace the battery and battery cover.
-Open any Odin one click from this thread (Recommend one with Gingerbread bootloaders)...
Odin One Clicks
-Boot phone into download mode
-Plug phone into USB (After Odin is open)
-When you see the yellow COM port lit up, flash.
That should do it!
followed your advice and im still stuck with every device driver i try it either says will not reconzie my device or that device cannot start etc. i refuse to give up so if you guys are on this journey with me thats kewl. ok instead of manually trying to install the driver i goto setup now and when i run it i get this message
Install driver - SAMSUNG Android USB Modem Software was not installed successfully (16) There is a driver installed for the device, please uninstall first.
So now im in device manager trying to find the correct driver to uninstall since its not listed under usb devices it only comes up as gadget serial under other devices. Im trying to get rid of the drivers but i seem to be stuck in a loop . i found this link http://www.techrepublic.com/blog/window-on-windows/get-rid-of-old-device-drivers-hidden-in-vista/867 so im trying the advice here and seeing if i can remove the device and add the right one man i should just reformat my hd and put in linux or unix or any os besides windows then id probably be ok.
You don't have to reformat to do Linux. It will run via a live usb drive or a side-by-side installation.
ok i used the advice from http://www.techrepublic.com/blog/window-on-windows/get-rid-of-old-device-drivers-hidden-in-vista/867 and showed hidden devices and removed all samsung drivers or anything remotely resembling samsung usb drivers including the gadget serial device and then reinstalled the supposedly correct drivers for my i897 atnt captivate or craptivate and it installed but gives me this error gadget serial control failed so now i suppose i have to find a driver that doesnt exist for a device that isnt correctly being identified by win 7 as a samsung galaxy s sgh-i897 antnt captivate. or does anyone know of a gadget serial control driver that will work so that odin3 will reconize my device so i can get some semblance of a cellphone back? no im trying the advice from http://forum.xda-developers.com/showthread.php?t=1355666 with the title [SOLVED] Gadget Serial Issue - No Flash my problem is i have the same prob but require a flash.
Have you given heimdall a try? It uses different drivers than Odin.
I didnt have to use heimdal odin3 finally reconized my phone after following my previous post option and installing previous set of drivers for my phone not the newest seems u can save a brick after all but pain in the rear but now ive learned so im
ready to hack my phone to death lol btw if anyone else has this prob feel free to ask me fer help lol and thank you very much for all the help in this wonderful forum top notch support guys with this kind of diligence there is nothing u guys cant do )
Good Luck

[Q] no cwm recovery , Odin not finding device after ics rom flash fail

Hi all , i hope someone can help : i was installing team hacksungs ics rom last night it seemed to be going ok at first but then got stuck at the animated splash screen (1 hr 45 mins) i pulled the battery and when i tryed to get into cwm recovery the phone keeps just bootlooping after showing google logo , i can get into download mode but neither odin or heimdall can find my phone and windows reports unrecognised usb device,heimdall reports- ERROR: Failed to access device. libusb error: -12. I have unbranded i9000. All drivers present and usb cable(s) checked and are ok....thanks in advance for any help
I have the exact problem and situation
Is the phone bricked for good?
You might need the drivers listed in the TH ICS thread. Before changing the drivers try plugging your phone into a different USB port
You might want to try a different computer, the libusb errors are common and are usually solved by using a different computer (I have seen those errors while flashing IPhones, they were resolved after reformatting or using another computer[I'm not saying that that is the only way of dealing with libusb issues, I just didnt bother with em after I found out that a fresh start/system fixes em]). Also, if you are into linux, try a linux distro on your computer and see if Heimdall works from there.
Good Luck
guys i have had the same problem on this phone. To be honest I am not sure I wanna stay on ics anymore alone because of this issue. Nothing wrong the phone is great but the driver problem is flat out pathetic when **** hits the fan.
Here is how I solved my problem. I installed and uninstalled and restarted my PC so many many times. Stuck my USB cable into multiple ports. If that didn't solve my problem i Installed and uninstalled the Samsung drivers (without kies).
Played around with device manager when it said the phone is not recognized by uninstalling and removing phone from USB cable and replugging . I installed the android sdk USB drivers and tried upgrading the not properly installed drivers with them (which I think hasnt helped much to be honest) .
All in all what I am trying to say is......that I was so ambitious trying to get it to run that at the end i got it to work after many many tries. With many tries I mean I was trying this repetitive process from 3 am to 7:30 am and it DID NOT WORK. I went to bed. Next day I tried fixing it using repeating the whole process from 5 pm up to around 830 pm.
I dunno how I got it to run at the end. All I know is the time I invested trying to get it to run were nearly 10hours of repetitive installing and uninstalling. Sadly that is the only tip I can give you. It seems to me as though it just randomly feels like working out of its ass.
I even brushed the USB port of my phone with alcohol and a brush. As mentioned above trying another PC is worth a try. I tried my sister's laptop without success though and even formatted my desktop for the sake of it.
The last thing I recall doing before getting this phone to get recognized on my PC was as follows: I charged it for an hour and then booted the phone in download mode and decided to try it again. And bam it worked.
But do give this method a try.
1. Plug phone to PC
2. Uninstall your device(exclamation mark) via device manager and then unplug your phone
3. Uninstall sgs drivers
4. Reboot PC
5. Install sgs drivers
6. Plug phone in download mode in again
7. If you get error, device not installed properly then open device manager and uninstall the exclamation mark again
8. Unplug phone once uninstalled.
9. plug it in again
Also guys, just out of curiosity what is your OS and is it 32 or 64 bit?
Good luck
P.s: I know this post isn't helping specifically but I believe the only solution is playing around with the drivers and device manager until it decides to work. I might install another rom (Ive only experienced this with ics so far. And this seems to be a common issue apparently. Does this happen to people on 2.3.x as well ?) tomorrow cause this issue is too time consuming should it occur again. Only had it with nushor kernel though.
.
Sent from my GT-I9000 using XDA App
many thanks
beardedwonder said:
You might need the drivers listed in the TH ICS thread. Before changing the drivers try plugging your phone into a different USB port
Click to expand...
Click to collapse
thanks , installing nexus drivers done the trick
not bricked
vytman said:
I have the exact problem and situation
Is the phone bricked for good?
Click to expand...
Click to collapse
Hi vytman , install the drivers from here : w w w.multiupload.com/BUCFT8M42N
the drivers allow your comp to recognise your device(which is now nexus after ics install) then you can reflash stock samsung firmware in odin .
u can't get into recovery at all?
imgibby123 said:
Hi vytman , install the drivers from here : w w w.multiupload.com/BUCFT8M42N
the drivers allow your comp to recognise your device(which is now nexus after ics install) then you can reflash stock samsung firmware in odin .
Click to expand...
Click to collapse
Thanks m8
It solved my problem. I also had a faulty usb cable, I had to hold it in the right position so it could connect to pc
imgibby123 said:
Hi vytman , install the drivers from here : w w w.multiupload.com/BUCFT8M42N
the drivers allow your comp to recognise your device(which is now nexus after ics install) then you can reflash stock samsung firmware in odin .
Click to expand...
Click to collapse
I was unable to download the file...i am having the exact same problems and your solution seems logical. i tried going online and just searching for a nexus driver but that didnt seem to work. I think it might have been an old version of the driver. Is there a way for me to get this driver?
Yeah multiupload gone now new link http://nexusshacks.com/nexus-s-hacks/how-to-install-nexus-s-windows-usb-drivers/ere : ,hope this helps
sorry link in last post now dead...currently searching for solution....be back soon with new link
kayzsh4ow said:
I was unable to download the file...i am having the exact same problems and your solution seems logical. i tried going online and just searching for a nexus driver but that didnt seem to work. I think it might have been an old version of the driver. Is there a way for me to get this driver?
Click to expand...
Click to collapse
try here http://forum.xda-developers.com/showthread.php?t=895545
read just part 1
be sure you uninstall sgs drivers or else this wont work
good luck

Galaxy TAB P1000 NOT Detecting in ODIN

Hello xda users,
I need HELP !
I have a galaxy tab P1000
currently froyo 2.2
wanted to upgrade to GB
Tried the Odin way from another link on this site (MANUAL updation for galaxy tab(p1000) into 2.3.3 gingerbread ), it failed and the Tab got soft bricked,
somehow managed to unbrick it, now its back to its original fw, but it keeps restarting in a loop until i switchd the damn thing off completely
I have tried to go in download mode to flash but odin doesnt recognise it , tried differnt computers too, no use.
I have gone in recovery mode, hard reset, wipe cache , still when i switch it on, it goes in a reboot loop.
tried to use heimdall. cant get sucess as i might not understand how to use it properly
Please help.
Sincere thanks to you if you can help me get my tab up and running., if not in GB atleast back in froyo.
(PS- i im not worried about my data , and i have not backed up the rom etc before doing any of these)
Try to reinstall or install a usb driver from samsung
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Yeah, happened to me too, nearly had a sh*t my pants when Odin didn't recognise my Tab.
I would recommend -
charge the Tab fully using wall adapter (4 hrs+)
plug it in with Odin open and using USB cable
don't expect Odin to recognise the Tab immediately
check back after 5 mins or so (I don't know, does Odin refresh?)
I was able to restore my Tab from the PC - ! - Marvin screen.
I don't want to go back there again though!
yea dude.. same here
i kept it on charge for a couple of hours and then tried.. bam it conencts..
Libon
Tab not turning on
HI Guys I have Galaxy 1000 .I was updating it by using kies in between the process my computer shut down and when I am trying to connect my tab again its not turning on .can some one help me please ?
Waiting no charge baterry 2 3 j
Run odin
Connect tab . Wait Long time 20 30min
Tab is. Détect go flashing
Sorry for my english
I m.. French
Envoyé depuis mon GT-P1000
GT P1000 Odin wont detect
hi guys can you help me on my GT P1000 odin wont detect it even after 2-3hrs. tried everything but odin wont detect my device.
thanks in advance...
iamkakers said:
hi guys can you help me on my GT P1000 odin wont detect it even after 2-3hrs. tried everything but odin wont detect my device.
thanks in advance...
Click to expand...
Click to collapse
do u have samsung kies installed in your pc? if does, kill the kies process (Ctrl+Alt+Del). close, and open odin3, put your tab into download mode, and then plug it into usb port. try to change different ports.
i always had this problems.. if all if that didn't work, i'll format my pc
Sent from my GT-P1000
odin3
hi
i also have a gt p1000 and odin3 doesnt detect the tab. i've been trying to root my tab for a while, tried odin and it doesnt detect, tried doomlord and it doesnt even get past the first step. i tried uninstalling kies on my windows 8 laptop and still no luck im not too sure what to do. is there something that i might be doing wrong because i follow all the info thati get from here.
is there another rooting app i can try that doesnt brick my device? and or is there an app that i can get that i am able to use a ps3 controller on my device that does not require a rooted device. please help
thanks
My Galaxy tab also doesn't connect to usb after cache wiped humber os flash
Thanks in advance guys!..
Earlier I was using Cyanogen mode 10 Custom ROM but has few issues like recognize SD card.
later I flashed to Humber OS caused real problem.
It was clock work recovery installed but my tab tab boots stays on screen humber OS.
It goes to recovery mode, and also to some unknown recovery mode.
Either the way not recognized by computer. I tried all options like heimtal an Odin. No help.
Friends any help, would be highly appreciated.
BUMP
Any solution to this given the fact that usb drivers have been installed?
Are you sure it is recognised by the computer before trying Odin or Heimdall?
I seen this in a post:
#################################################################################
4 Reasons Why Odin is Not Detecting Your Android Device:
Reason 1: No drivers installed for your phone
Most of the time Odin is not able to detect your phone, simply because you haven’t installed the drivers for your phone. Normally windows would automatically download the respective drivers for your phone from the internet and install it. But in case it isn’t able to do so, you need to download the drivers from your phone manufacturer’s website.
Reason 2: Inferior quality or damaged USB cable
Odin is very sensitive to low quality or damaged USB cables, which is a major reason why odin will detect your android phone in file transfer mode but fail to detect it in download mode. You might have a genuine USB cable that came with your Android phone but with time its quality will depreciate, which is why you might have to get a new USB cable.
Reason 3: Odin is corrupted
This happened once with a reader on my blog, we tried everything to solve his problem, but in the end using a different version of Odin worked out for him.
Reason 4: USB port is defective
Defective USB ports can also be a reason for Odin not detecting your Android phone. This was a problem faced by one of my readers and plugging the USB cable in another USB port worked out for him.
#######################################################################
and I need install cwm recovery on a twrp recovery and just do that with this app:
ROM Manager
if you want do same job; you can download it from google play easily!
and install recovery,rom or restore backup with it.
farza(db)astany said:
I seen this in a post:
#################################################################################
4 Reasons Why Odin is Not Detecting Your Android Device:
Reason 1: No drivers installed for your phone
Most of the time Odin is not able to detect your phone, simply because you haven’t installed the drivers for your phone. Normally windows would automatically download the respective drivers for your phone from the internet and install it. But in case it isn’t able to do so, you need to download the drivers from your phone manufacturer’s website.
Reason 2: Inferior quality or damaged USB cable
Odin is very sensitive to low quality or damaged USB cables, which is a major reason why odin will detect your android phone in file transfer mode but fail to detect it in download mode. You might have a genuine USB cable that came with your Android phone but with time its quality will depreciate, which is why you might have to get a new USB cable.
Reason 3: Odin is corrupted
This happened once with a reader on my blog, we tried everything to solve his problem, but in the end using a different version of Odin worked out for him.
Reason 4: USB port is defective
Defective USB ports can also be a reason for Odin not detecting your Android phone. This was a problem faced by one of my readers and plugging the USB cable in another USB port worked out for him.
#######################################################################
and I need install cwm recovery on a twrp recovery and just do that with this app:
ROM Manager
if you want do same job; you can download it from google play easily!
and install recovery,rom or restore backup with it.
Click to expand...
Click to collapse
reason 1: my phone is samsung and it's detected by ODIN, kies and I transfer files from and to my computer without problems. also tried reinstalling just in case but nothing, so I guess this is not the answer for my problem
reason 2: tried with original cable, but as I didn't use the tablet for a long time I also thought it could be the cable, so I asked a friend of mine if he could lend me one cable, but that didn't work. pity. :/
reason 3: tried 3 different versions of ODIN, and in every version my phone (mentioned above) is detected. shame. :S
reason 4: tried the 3 different USB ports in my laptop. two 2.0 USB ports and one 3.0 USB port, so again I doubt this is the reason of my problem.
extra reason: ~~~ maybe it's the OS version ~~~ // this laptop came with windows 8 preinstalled. nothing. then, I updated to win 8.1. again nothing. now I'm running windows 10 and the same, nothing is detected neither by ODIN nor the computer. also tried in 4 different computers running win xp, win 7 and other with win 8.1.
btw, thank you anyway for your apportation; this may help other people, but unfortunately, it's not my case, so can anybody else join me to think about a new reason and a way to solve it? thank you very much :good: :highfive: :fingers-crossed:
~~~~~~~~~~~~ EDIT ~~~~~~~~~~~~
I have continued researching and found a software. it didn't work for me, but maybe it works for other people.
-first, you have to make sure you have java installed on your computer.
-second, extract the oneclick.rar file on an easy-access directory.
-third, put your tab on download mode (while charging icon when tab is turned off, press power + volume down until a yellow triangle appears).
-fourth, click start unsoft-brick and let the magic begin! 8)
note: if a warning error pops up, trust the software and click on resolution center and follow the instructions of one of the three "alternative ways".
download: https://www.dropbox.com/s/8ix6yygu23a1kjn/OneClick.rar?dl=0
good luck!!
help
blizzard_boy said:
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Click to expand...
Click to collapse
hi can you plz help me out with the processess you followed to as im suffring the same problum only CWM working and even it shows sd card mount error also not installing any rom via SD card showing error and odin not detecting it nothing happening only CWM and blank screen
blizzard_boy said:
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Click to expand...
Click to collapse
How did you did it im having the same error???
i did the same thing with my tab exactly like yours plzzzz help me recover it

Bricked even with download mode ?

Hi All,
here is the story, I was on MilkyS GB rom, made a ndriod backup, then flashed dark knight 2.1 then wiped , flashed DK3 w/ Semaphone. Today, I was going to flash stock JVU via Odin but while I was charging up the phone I already noticed Windows was showing error saying something like ' USB device is malfunction cannot install' , so I thought that must be a DK3 bug for not able to access to the SD card, so I did not care.
Went ahead and tried to flash Odin, sure enough Odin did not detect my phone, so did Google and found 'Gnex USB drivers' which by the way took forever to install, while waiting , I thought I might as well just go back to MilkyS GB by using the backup I have done before, so I went in recovery tried to restore, but not successful, so I went ahead and choose reboot....now I am stuck at the boot screen, pull battery, I can go into download mode , however, Odin cannot detect the phone so I still can NOT flash anything.... (just now tried all kinds of drivers I can find, CM7 USB driver, Google usb_driver_r04-windows, even installed the drivers within Andriod SDK, still can't detect the phone..)
Any suggestions ? am I out of luck ? by the way, tried installing drivers in 3 x different laptops and with different USB port on them...
Have you tried a different USB cable? Also ensure KIES is not running & that there are no KIES processes running in the background. Make sure no other usb devices connected to the pc. I've also heard Windows 7 64bit can be the issue sometime but not sure so maybe try a windows xp pc.
Also try disabling any antivirus/firewall on the pc. I had this is issue but for me restarting pc and using a different USB port did the trick.
Should you figure out the USB issue you can't actually restore a Gingerbread backup from ICS.
You will need to get a stock rom (darky resurection should also work) and flash with ODIN. You will need a 3 file stock rom (pda,phone,csc) & 512 pit file.
From here you will need to select all files into relevant places, check repartion and run ODIN. Sometimes I've also needed to flash a second time with just the 3 files and repartition unchecked.
scubadude said:
Have you tried a different USB cable? Also ensure KIES is not running & that there are no KIES processes running in the background. Make sure no other usb devices connected to the pc. I've also heard Windows 7 64bit can be the issue sometime but not sure so maybe try a windows xp pc.
Also try disabling any antivirus/firewall on the pc. I had this is issue but for me restarting pc and using a different USB port did the trick.
Should you figure out the USB issue you can't actually restore a Gingerbread backup from ICS.
You will need to get a stock rom (darky resurection should also work) and flash with ODIN. You will need a 3 file stock rom (pda,phone,csc) & 512 pit file.
From here you will need to select all files into relevant places, check repartion and run ODIN. Sometimes I've also needed to flash a second time with just the 3 files and repartition unchecked.
Click to expand...
Click to collapse
thanks scubadude for your reply. Yes, tried 2 x cables, 3 x laptops and all the USB ports on the laptops, now trying on a clean XP , AV disabled PC still no go.
I know the Odin 3 file process and so on and I kind of know that I can't flash GB on top of ICS that is why I attempt to flash stock in Odin but I guess I was just impatient to wait for the stupid Samsung driver to be installed and made a stupid mistake...
bestjsg said:
thanks scubadude for your reply. Yes, tried 2 x cables, 3 x laptops and all the USB ports on the laptops, now trying on a clean XP , AV disabled PC still no go.
I know the Odin 3 file process and so on and I kind of know that I can't flash GB on top of ICS that is why I attempt to flash stock in Odin but I guess I was just impatient to wait for the stupid Samsung driver to be installed and made a stupid mistake...
Click to expand...
Click to collapse
I guess you have tried going back in recovery mode using the 3-button combo but that is also not working?
Odin isn't recognizing your phone but does windows recognize it? If you uninstall all samsung drivers and then try to connect your phone to PC does it ask for installation of drivers? .. if it doesn't that means your phone's usb could have become faulty.. (just speculating)
Or you can try to use Heimdall instead of Odin.. maybe that'll work for you..
bestjsg said:
thanks scubadude for your reply. Yes, tried 2 x cables, 3 x laptops and all the USB ports on the laptops, now trying on a clean XP , AV disabled PC still no go.
I know the Odin 3 file process and so on and I kind of know that I can't flash GB on top of ICS that is why I attempt to flash stock in Odin but I guess I was just impatient to wait for the stupid Samsung driver to be installed and made a stupid mistake...
Click to expand...
Click to collapse
Try using Heimdall for mac or linux. It does the same as Odin with no drivers.
Also try cleaning the contacts in usb port on the phone with a small brush(this worked for me when I had similar problems).
http://forum.xda-developers.com/showthread.php?t=878686
sorenba said:
Try using Heimdall for mac or linux. It does the same as Odin with no drivers.
Also try cleaning the contacts in usb port on the phone with a small brush(this worked for me when I had similar problems).
http://forum.xda-developers.com/showthread.php?t=878686
Click to expand...
Click to collapse
thanks tried Heimdall Frontend suite 1.3.1 , also tried Zadig.exe included in the package, the computer still does not detect the phone in download mode.
btw , I have also already use Android SDK to install the Google USB driver....see attached.
Had a similar situation.
Eventually used EZbase's "Odin" version and it worked using the drivers he linked to.
asaf-g said:
Had a similar situation.
Eventually used EZbase's "Odin" version and it worked using the drivers he linked to.
Click to expand...
Click to collapse
thanks just tried the drivers from EZbases Odin, still did not work.
btw, tried brushing the connector on the phone in case of dust etc , still no go.
anyone else has any idea?..so sad right now ...
Sent from my Dell Streak using XDA
Same happened with all my laptops featuring a intel chipset. My desktop with nVidia chipset is the only one that detected it.
bestjsg said:
thanks tried Heimdall Frontend suite 1.3.1 , also tried Zadig.exe included in the package, the computer still does not detect the phone in download mode.
Click to expand...
Click to collapse
Try using Heimdall for linux. The windows version depends on drivers while the linux does not need drivers.
Also try turning USB-debugging on. Some people report that this is needed for download mode, though I don't see how this can make a difference as the OS is not loaded when using download mode.
If this doesn't work I think you have a hardware problem.
EDIT: Don't use WM-ware etc for the above. I think an Ubuntu live CD will be fine.
sorenba said:
Try using Heimdall for linux. The windows version depends on drivers while the linux does not need drivers.
Also try turning USB-debugging on. Some people report that this is needed for download mode, though I don't see how this can make a difference as the OS is not loaded when using download mode.
If this doesn't work I think you have a hardware problem.
EDIT: Don't use WM-ware etc for the above. I think an Ubuntu live CD will be fine.
Click to expand...
Click to collapse
thanks tried created a ubuntu live booted usb drive , installed heimdall , same thing can't detect the phone and then tried SDB in command prompt but gave error : device not found....
Sent from my Dell Streak using XDA
tried windows sdb , will try booting into ubuntu tonight and use sdb ..if that exist...
Sent from my Dell Streak using XDA
tried sdb via linux also , and got error device not found... anyone any idea ?
Sent from my Dell Streak using XDA
have read more threads haven't found a solution yet...
Sent from my Dell Streak using XDA
Same predicament
In the exact same predicament, was on MIUIv4_I9000_2.3.23_v1.1...
screwed up trying to go back to GB rom, can get to download mode,
but stuck there. Tried Kies and all other drivers. Tried Odin, nothing.
Installed Ubuntu, tried Heimdall, all for not.
Guess I have to send it back to Virgin....
me sad !!
eurorv said:
In the exact same predicament, was on MIUIv4_I9000_2.3.23_v1.1...
screwed up trying to go back to GB rom, can get to download mode,
but stuck there. Tried Kies and all other drivers. Tried Odin, nothing.
Installed Ubuntu, tried Heimdall, all for not.
Guess I have to send it back to Virgin....
me sad !!
Click to expand...
Click to collapse
thanks for sharing ..just weird that no drivers for ics rom works and I was always told that as long as you can get to download mode the phone is not truely bricked...but guess that saying must be changed now....i
will virgin fix it for you ? will they charge you ?
Sent from my Dell Streak using XDA
My SGS is past warranty.
Virgin sent me to a Samsung repair shop in ville St-Laurent.
They're charging me 50$ to reflash, extra 25 for 1 day service
Getting my baby back 10 am tomorrow... Whoohooo !!
eurorv said:
My SGS is past warranty.
Virgin sent me to a Samsung repair shop in ville St-Laurent.
They're charging me 50$ to reflash, extra 25 for 1 day service
Getting my baby back 10 am tomorrow... Whoohooo !!
Click to expand...
Click to collapse
that is great news....do you know if they will have to open up the phone and flash the hardware?
Sent from my GT-P7510 using XDA

Categories

Resources