-why i can not Unlock bootreader Command fastboot oem get_identifier_token error it not up code for unlock
hamit66 said:
-why i can not Unlock bootreader Command fastboot oem get_identifier_token error it not up code for unlock
Click to expand...
Click to collapse
OK, when you boot into your bootloader screen, can you post a screen shot of it?
What version of the bootloader do you have?
The unlock token is only available on the official HTC bootloaders versions 1.16.0000 and above.
If you have version 1.13.0000, then you can just run Revolutionary to gain S-OFF.
hamit66 said:
-why i can not Unlock bootreader Command fastboot oem get_identifier_token error it not up code for unlock
Click to expand...
Click to collapse
Ok seriously, you really have to stop using google translate.
As to your problem, did you follow HTC's instructions exactly as they say on the website? If you did, there shouldn't be a problem. That's my first guess.
hamit66 said:
-why i can not Unlock bootreader Command fastboot oem get_identifier_token error it not up code for unlock
Click to expand...
Click to collapse
To answer your question that you posted in the Development section, you can download the last and final HTC ICS ROM for the IncS at the HTCDEV.com site.
i'm do follow web HTCDEV.com but it is not success
Phone me
BlackRose
Hboot 2.03.0000 S-OFF
ON CMD
D:\android>fastboot oem get_identifier_token
< waiting for device >
... INFO[ERR] Command error !!!
OKAY [ 0.007s]
finished. total time: 0.007s
hamit66 said:
i'm do follow web HTCDEV.com but it is not success
Phone me
BlackRose
Hboot 2.03.0000 S-OFF
ON CMD
D:\android>fastboot oem get_identifier_token
< waiting for device >
... INFO[ERR] Command error !!!
OKAY [ 0.007s]
finished. total time: 0.007s
Click to expand...
Click to collapse
OK, you have BlackRose HBOOT and you have S-OFF, so there is no need to unlock this bootloader.
Now if you want to go back to a full stock HTC RUU, then you will have to remove the BlackRose HBOOT before you can flash the HTC RUU.
hamit66 said:
i'm do follow web HTCDEV.com but it is not success
Phone me
BlackRose
Hboot 2.03.0000 S-OFF
ON CMD
D:\android>fastboot oem get_identifier_token
< waiting for device >
... INFO[ERR] Command error !!!
OKAY [ 0.007s]
finished. total time: 0.007s
Click to expand...
Click to collapse
OK I hve no idea what Phone me means so I'll assum that's what it says in your bootloader.
Since you already have Blackrose, just flash a recovery and you are good to go for installing custom ROMs. If you need assistance, please look at the guides stickied in the general forum.
tpbklake said:
OK, you have BlackRose HBOOT and you have S-OFF, so there is no need to unlock this bootloader.
Now if you want to go back to a full stock HTC RUU, then you will have to remove the BlackRose HBOOT before you can flash the HTC RUU.
Click to expand...
Click to collapse
yeah i want to go back to a full stock HTC RUU offical rom
before Revolutionary Hboot 6.0..
Now i Suspect why is not up code on CMD
****** Thank you so much for Answer questions******** :good::good::good::good:
072665995 said:
OK I hve no idea what Phone me means so I'll assum that's what it says in your bootloader.
Since you already have Blackrose, just flash a recovery and you are good to go for installing custom ROMs. If you need assistance, please look at the guides stickied in the general forum.
Click to expand...
Click to collapse
Thank you so much
i Suspect why is not up code on CMD for unlock
Related
Here is a hex edited version of the stock 1.44.000 hboot (1.29.651.10).
It is basically for people who want their hboot to appear stock.
What was edited:
1) "TAMPERED" was removed.
2) "UNLOCKED" is masked as "LOCKED"
3) "S-OFF" is masked as "S-ON"
4) Red development text (on boot up) was removed.
Flash it in bootloader (fastboot)! Flash at own risk! (you need S-OFF obviously)
How to flash:
Code:
fastboot oem rebootRUU
fastboot flash zip hboot_hexed.zip
fastboot reboot-bootloader
Enjoy!
MD5: 436aaad9df326ea7680d184988fd6f91 hboot_hexed.zip
MD5: 24917745f52b366124a3ebcd03b7c166 hboot_hexed_redonly.zip
Awesome work!
Sent from my Sprint HTC ONE using xda premium
quick and painless!!!! thanks for the work!!!
Wait... We have s-off? How do I achieve this lol. Apparently I've been under a rock!
Sent from my HTCONE using Tapatalk 4 Beta
enik_fox said:
Wait... We have s-off? How do I achieve this lol. Apparently I've been under a rock!
Sent from my HTCONE using Tapatalk 4 Beta
Click to expand...
Click to collapse
Yup http://forum.xda-developers.com/showthread.php?t=2314642
Sent from my HTCONE using Tapatalk 4 Beta
thatotherguy.. said:
Yup http://forum.xda-developers.com/showthread.php?t=2314642
Sent from my HTCONE using Tapatalk 4 Beta
Click to expand...
Click to collapse
Can you make one just for the Red development removal only?? and thanks!!
killer!
anyone know the correct command for a splash?
I tried
fastboot flash splash1 splash.img
it say writing splash1
then "remote: not allowed"
happened with stock and this hboot
il Duce said:
killer!
anyone know the correct command for a splash?
I tried
fastboot flash splash1 splash.img
it say writing splash1
then "remote: not allowed"
happened with stock and this hboot
Click to expand...
Click to collapse
Since this is a stock hboot, I'm sure flashing the splash1 command isn't supported.
Try flashing an engineering hboot first, then flash the splash, then flash back this stock hboot if you wish.
AssassinsLament said:
Since this is a stock hboot, I'm sure flashing the splash1 command isn't supported.
Try flashing an engineering hboot first, then flash the splash, then flash back this stock hboot if you wish.
Click to expand...
Click to collapse
I've been looking for eng, can't find one, you have one?
il Duce said:
I've been looking for eng, can't find one, you have one?
Click to expand...
Click to collapse
hey duce
look at http://moonshine.io/
Install moonshine hboot. This is a customized hboot with many eng-style commands.
il Duce said:
I've been looking for eng, can't find one, you have one?
Click to expand...
Click to collapse
Sorry, I don't. I used fnoji111's HBOOT-8064 (supposedly supports M7_WLS (sprint's)) briefly, although it seemed to have worked fine, I didn't know if it was a good idea or not, so I flashed back to hexed stock.
il Duce said:
I've been looking for eng, can't find one, you have one?
Click to expand...
Click to collapse
this is link for eng hboot that was posted in the sim unlock thread in the international htc one forum, the instructions have been taken down since op is looking for a way to simplify it
https://www.dropbox.com/s/3x3wwga0qy3bwky/enghboot.nb0
original instructions that was posted before removal
Code:
Originally Posted by st_7
Yep! It's live now, here are the instructions
S-OFF is MANDATORY. if you aint got it, git it!
adb & fastboot knowledge and setup is Mandatory
WARNING - This is a simple procedure but can and will brick a device if the steps are not followed or if you explore deeper than you should during the Unlock. I am not responsible for any damage and HIGHLY suggest following all the steps through until the end.
1. download the hboot we will be using TEMPORARILY. put the downloaded file in your adb/fastboot folder
https://www.dropbox.com/s/3x3wwga0qy3bwky/enghboot.nb0
2. Make a backup of your current hboot and move it into your adb/fastboot folder
C:\android>adb shell
C:\android>su
C:\android>dd if=/dev/block/mmcblk0p12 of=/sdcard/myhboot.img
exit
exit
C:\android>adb pull /sdcard/myhboot.img
3. Now we are going to prepare to flash the new hboot that we need to clear the simlock from device.
C:\android>adb reboot bootloader
C:\android>fastboot oem rebootRUU
*wait for the reboot into the black htc screen*
C:\android>fastboot flash hboot enghboot.nb0
C:\android>fastboot reboot-bootloader
Ok, you should notice the difference right away between the old hboot and new hboot. This is a engineering hboot and is extremely dangerous if you tinker around in it. I HIGHLY reccomend following thru with the sim unlock and following the last step to restore your non eng-hboot. eng hboot is NOT necessary to have on a s-off device.
so now we are going to make sure what type of sim lock you have on your device.
C:\android>fastboot oem readsimlocktype
you will get a readout similar to this -
(bootloader) size: simlock = 4256, password = 96, unlock_record = 256
(bootloader) simlock type: 0
OKAY [ 0.018s]
finished. total time: 0.019s
The part we are looking for is in line 2 "(bootloader) simlock type: 0"
simlock type here is "0"
HERE IS THE MUSTARD
C:\android>fastboot oem clearsimlockcode 0 *REPLACE "0" WITH YOUR SIMLOCK TYPE*
Readout -
(bootloader) write_simlock(1368): C9F35678, 0
(bootloader) TZ_HTC_SVC_ENC ret = 0
(bootloader) write_simlock(1382): 6E7432F0, 4E07AFC7
(bootloader) [SECURITY] [PGFS] partition_update_pgfs: pg1fs_simlock
OKAY [ 0.043s]
finished. total time: 0.044s
YOU ARE SIM UNLOCKED. PLEASE FINISH THE LAST STEP TO RESTORE YOUR ORIGINAL HBOOT
C:\android>fastboot flash hboot myhboot.img
C:\android>fastboot reboot-bootloader
And just for hay of it, if you do not have superCID and would like it -
C:\android>fastboot oem writecid 11111111
C:\android>fastboot reboot
thatotherguy.. said:
hey duce
look at http://moonshine.io/
Install moonshine hboot. This is a customized hboot with many eng-style commands.
Click to expand...
Click to collapse
They don't have a download for it, so it's part of their S-OFF package, and I don't know if it's a good idea to re- S-OFF.
AssassinsLament said:
They don't have a download for it, so it's part of their S-OFF package, and I don't know if it's a good idea to re- S-OFF.
Click to expand...
Click to collapse
I have it,,, how do I put it out?
Sent from my HTCONE using Tapatalk 4 Beta
thatotherguy.. said:
I have it,,, how do I put it out?
Sent from my HTCONE using Tapatalk 4 Beta
Click to expand...
Click to collapse
I don't know if they want it dumped, since they hid it in their S-OFF executable. So I wouldn't do it.
AssassinsLament said:
I don't know if they want it dumped, since they hid it in their S-OFF executable. So I wouldn't do it.
Click to expand...
Click to collapse
Ahhh
il Duce said:
killer!
anyone know the correct command for a splash?
I tried
fastboot flash splash1 splash.img
it say writing splash1
then "remote: not allowed"
happened with stock and this hboot
Click to expand...
Click to collapse
I just confirmed it, stock hboot doesn't support flashing of splash1. Engineering hboot does though!
AssassinsLament said:
I just confirmed it, stock hboot doesn't support flashing of splash1. Engineering hboot does though!
Click to expand...
Click to collapse
All we need is a img we want to use and that's it?
Sent from my HTCONE using Tapatalk 4 Beta
The original sim unlock method doesnt work, me and others tried it thats why he took it down. This part may be key
"Originally Posted by 18th.abn View Post
im really sorry guys, i rushed putting thread together. what needs to happen is you have to write your own simlock code to the device and then unlock it. once its done it looks like this
C:\android>fastboot oem enablesimlock 0 0 11111111
...
(bootloader) write_simlock_password(299): 0, 0, 0, 0
(bootloader) TZ_HTC_SVC_ENC ret = 0
(bootloader) write_simlock_password(319): EB, 95, 41, 94
(bootloader) [SECURITY] [PGFS] partition_update_pgfs: pg1fs_simlock
(bootloader) write_simlock(1368): C9F35678, 0
(bootloader) TZ_HTC_SVC_ENC ret = 0
(bootloader) write_simlock(1382): 6E7432F0, 4E07AFC7
(bootloader) [SECURITY] [PGFS] partition_update_pgfs: pg1fs_simlock
OKAY [ 0.075s]
finished. total time: 0.076s
thats the actual sim unlock. im redoing the instructions in the op
the first "0" after enablesimlock is "0" to unlock or "1" to lock. the second "0" is the simlock type. the 11111111 is the simlock code once it was changed from its original "6E7432F0" to "11111111"
will be updating op"
See that bunch of ones(11111111) that supposed to be where the sim unlock code goes also you need to know your sim unlock number. Now you just have to find a sim unlock code...8 digit number
I'm out of thanks but Thanks OP
I got the 4.2.2 Ruu installed and in order to downgrade on dev edition i flashed the 1.44 stock Hboot.
When i try to flash the RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.3 it allways shows me the error 158 while tries to flash the RUU.
So i relocked my bootloader, as some states that could solve my prob. But i got the same error 158 again.
So i wanted to reunlock the bootloader again.(Still 4.2.2 GE and the Hboot 1.44)
Normally on GE roms(1.54 hboot) u just hit "fastboot oem unlock" but on 1.44 this is impossible. So i managed to get a token id key from htc dev
for my hboot 1.44.
The token works but theres no " are u really want to unlock bl" request, like it is on stock sense roms at the end of the bl-unlock procedure.
So bl stays relocked! I
Am i stucked now on a relocked bl with no way to get it unlocked again????
Code:
fastboot oem unlock
won't every work on an HTC device, by the way what does the terminal returns?
matt95 said:
Code:
fastboot oem unlock
won't every work on an HTC device, by the way what does the terminal returns?
Click to expand...
Click to collapse
C:\Android\adt-bundle-windows-x86_64-20130729\sdk\platform-tools>fastboot flash
unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.155s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.005s]
finished. total time: 0.162s
The terminal returns this after flashing the token. So this should be right! but bl stays relocked.
fastboot oem unlock :
C:\Android\adt-bundle-windows-x86_64-20130729\sdk\platform-tools>fastboot oem un
lock
...
FAILED (remote: loading custom splash failed)
finished. total time: 0.002s
C:\Android\adt-bundle-windows-x86_64-20130729\sdk\platform-tools>
That's strange, try to download again your unlockcode.bin, If it does not work then you're pretty much stucked there
matt95 said:
That's strange, try to download again your unlockcode.bin, If it does not work then you're pretty much stucked there
Click to expand...
Click to collapse
No ,new token didnt helped. Is there any chance to get the RUU.exe to work? heres the intresting part of the log of it:
Im on the right cid and mid!
<T235448><DEBUG><CMD>htc_fastboot -s SH362W900689 -d flash zip C:\Users\Bruno\AppData\Local\Temp\{164DC584-095D-4AE4-A69C-6DECA925F94E}\{50F2F878-636A-496F-A7CB-544C067E0C4B}\rom.zip</CMD>
</DEBUG></T235448>
<T235545><DEBUG><OUT>sending 'zip'... (1004418 KB) OKAY</OUT>
</DEBUG></T235545>
<T235545><DEBUG><OUT>writing 'zip'... (bootloader) rom parsing start ...</OUT>
</DEBUG></T235545>
<T235545><DEBUG><OUT>(bootloader) rom parsing finish ...</OUT>
</DEBUG></T235545>
<T235545><DEBUG><OUT>(bootloader) zip header checking...</OUT>
</DEBUG></T235545>
<T235545><DEBUG><OUT>(bootloader) zip info parsing...</OUT>
</DEBUG></T235545>
<T235545><DEBUG><OUT>FAIL22 loading zip info fail</OUT>
</DEBUG></T235545>
<T235545><DEBUG><OUT>FAILED (remote: 22 loading zip info fail)</OUT>
SOLVED !
Yeah man I got it finally! Somehow i was able to enter RUU mode with locked bl! Flashed a RUU and i was back in the game! I hit the token command first, which maybe caused a temp bypass,cause on the first try i rebooted bl before hiting the Ruu command, which didnt worked !
GN8 and Thanks
Yeah, with an official GPe HTC One you only unlock it using 'fastboot oem unlock' - you do NOT have to use HTCDev at all...
Taken from this HTC Blog post - http://blog.htc.com/2013/05/htc-one-google-nexus-experience/:
"***The HTC One special edition bootloader can be unlocked by standard method for “Nexus experience” devices"
Meaning you use the standard Nexus unlock procedure
EDIT: Re-read the OP, seems you have converted it to Sense so in that case, normal HTC unlock rules apply
EddyOS said:
Yeah, with an official GPe HTC One you only unlock it using 'fastboot oem unlock' - you do NOT have to use HTCDev at all...
Taken from this HTC Blog post - http://blog.htc.com/2013/05/htc-one-google-nexus-experience/:
"***The HTC One special edition bootloader can be unlocked by standard method for “Nexus experience” devices"
Meaning you use the standard Nexus unlock procedure
EDIT: Re-read the OP, seems you have converted it to Sense so in that case, normal HTC unlock rules apply
Click to expand...
Click to collapse
Yeah i know thats the way to do this on GE Roms! I solved it allready . No u cant open a sense bootloader under GE.(The request "are u really want to unlock the bl" wont appear(cause of wrong rom) and after u hit the token nothing happens and bl stays relocked .
As i described the post before i somehow "bypassed" the bl with the htc dev token to get into RUU mode.
My bl was still on relocked after i installed the new 4.3 GE RUU. For sure i could it unlock with "fastboot oem unlock" after new RUU was on!
So what ive learned?
DONT RELOCK A Hboot 1.44 BL on a GE ROM CAUSE U WILL STAY RELOCKED!
By mistake i did Relock my device .
What command is use to unlock again my fastboot.
Now my device doesn't have any recovery and rom after i flashed hboot 2.49 in my device
help!!
Anshumanabhishek said:
By mistake i did Relock my device .
What command is use to unlock again my fastboot.
Now my device doesn't have any recovery and rom after i flashed hboot 2.49 in my device
help!!
Click to expand...
Click to collapse
You need to have your original Unlock Token with HTC, at which point you type this into command prompt:
fastboot flash unlocktoken <Unlock_code.img> <--- this may be different if you happen to change the name of the .img file
If you don't have your Unlock_code.bin file, follow the steps on the original HTC Unlock site:
http://www.htcdev.com/bootloader
not works
digitalism said:
You need to have your original Unlock Token with HTC, at which point you type this into command prompt:
fastboot flash unlocktoken <Unlock_code.img> <--- this may be different if you happen to change the name of the .img file
If you don't have your Unlock_code.bin file, follow the steps on the original HTC Unlock site:
http://www.htcdev.com/bootloader
Click to expand...
Click to collapse
C:\adb>fastboot flash unlocktoken Unlock_code.img
error: cannot load 'Unlock_code.img'
Anshumanabhishek said:
C:\adb>fastboot flash unlocktoken Unlock_code.img
error: cannot load 'Unlock_code.img'
Click to expand...
Click to collapse
Do you have the Unlock_token.img file within your platform-tools Android SDK folder?
Anshumanabhishek said:
C:\adb>fastboot flash unlocktoken Unlock_code.img
error: cannot load 'Unlock_code.img'
Click to expand...
Click to collapse
First: error: cannot load = MyFileNameIsWrong or doesn't even exist
Second get a new unlocktoken using HTCdev
Third, please stop cross-posting and multi-threading:
http://forum.xda-developers.com/showthread.php?t=2775764
http://forum.xda-developers.com/showthread.php?t=2774955
http://forum.xda-developers.com/showthread.php?t=2775040
http://forum.xda-developers.com/showthread.php?t=2772878
http://forum.xda-developers.com/showthread.php?t=2773485
(not to mention the individual posts)
this will not help you in any way, it actually makes it harder to help because the information is splattered across different threads & posts, making it much more difficult for members to help you.
Thank you and good luck
I agree, you should be searching for how to unlock your bootloader within the forums as there are more than a few threads already. I was just being nice, but you should always search before posting.
Good luck.
digitalism said:
I agree, you should be searching for how to unlock your bootloader within the forums as there are more than a few threads already. I was just being nice, but you should always search before posting.
Good luck.
Click to expand...
Click to collapse
Sorry, I wasn't trying to imply you/we shouldn't help the OP, but keeping things in one thread makes it simpler. If I'm not mistaken, to OP has a Dual-SIM variant, so keeping all the information in one thread is best, imho.
Hey all,
I am trying to convert my phone to the GPE (using a guide from wonderhowto). I have done this before, but unfortunately I have had to send my phone back twice for unrelated repairs, so I am now using a new phone.
I stuck Maximus ROM on the phone, but decided I wanted vanilla android for a bit, when I followed the guide I got stuck at the writecid step, I get the following error message:
fastboot oem writecid GOOGL001
...
(bootloader) [JAVACARD_ERR] SD/USBDISK Init error
OKAY [ 0.003s]
finished. total time: 0.003s
Click to expand...
Click to collapse
I have not been able to move past this step now, and I've struggled to find any posts anywhere detailing a way around this error.
Any ideas?
Are you s-off ? Have you tried supercid ?
Seanie280672 said:
Are you s-off ?
Click to expand...
Click to collapse
Yep.
Seanie280672 said:
Have you tried supercid ?
Click to expand...
Click to collapse
Just tried that now, same results.
Hey guys so I have a lot of problems with my phone like the purple camera and my volume down broke. Ive been trying to fix it for ages and im finally up to the last step and its not working.
I'm trying to get S-ON and used the cmd "fastboot oem writesecureflag 3" but it gives me an error fail thing
C:\Users\Ivan\Desktop\ROOT>adb devices
List of devices attached
HT35DW923150 device
C:\Users\Ivan\Desktop\ROOT>adb reboot boatloader
C:\Users\Ivan\Desktop\ROOT>fastboot devices
HT35DW923150 fastboot
C:\Users\Ivan\Desktop\ROOT>fastboot erase chache
erasing 'chache'...
FAILED (remote: not allowed)
finished. total time: 0.014s
C:\Users\Ivan\Desktop\ROOT>fastboot erase cache
erasing 'cache'...
OKAY [ 0.366s]
finished. total time: 0.372s
C:\Users\Ivan\Desktop\ROOT>fastboot oem writesecureflag 3
...
(bootloader) partition sbl2 signature error
(bootloader) writesecureflag: partitions siganture failed
OKAY [ 0.086s]
finished. total time: 0.090s
C:\Users\Ivan\Desktop\ROOT>
So I dont know what to do from here, I hope you guys can help me out.
Send your phone without S On HTC check for unlocked relocked locked only
If Locked is there without tampered they will avail warranty
To remove Tempered and set Locked use Guru bootloader reset tool in TWRP
yatindroid said:
Send your phone without S On HTC check for unlocked relocked locked only
If Locked is there without tampered they will avail warranty
To remove Tempered and set Locked use Guru bootloader reset tool in TWRP
Click to expand...
Click to collapse
Are you sure that i can send my One with S-Off??
Raschild6 said:
Are you sure that i can send my One with S-Off??
Click to expand...
Click to collapse
in my country they check tempered and unlocked bootloader not for S Off or On
ask your friends in your country
yatindroid said:
in my country they check tempered and unlocked bootloader not for S Off or On
ask your friends in your country
Click to expand...
Click to collapse
no problem i have set S On, now my One is in the other hands i hope it comes back soon!!
Any luck on this front? I am getting the same message when trying to writesecureflag 3. Any ideas?
i had a mis-matching hboot version between my ROM and firmware. downgraded the firmware back to the version matching the ROM and i was able to get S-ON
you guys have a modded hboot in there (who knows what else is non-100%-stock),
consider yourself lucky that command does signature checks, otherwise you'd have an insta-brick paperweight on your hands.