I've managed to install 3 different mods today. AOKP, Cyanogen and d3rp. Each one install successfully through TWRP then goes to boot. Most of the time it doesn't make it passed the boot screen. Sometimes it does and I can use my phone for about a second before it restarts. It just keeps retarting over and over. I know I flashed it right, i've wiped the cache'..I dunno what else to do. AOKP and d3rp both sometimes boot. But I cant use my phone for more than 20-30 secs if it does before it restarting..
What I did..
1. Unlock bootloader using the htcdev instructions (No issues)
2. Install custom recovery (installed TWRP no issues)
3. Flash custom mod (was able to successfully flash CM,AOKP and D3rp)
CM never got passed the boot animation.
AOKP and d3rp sometimes got passed the boot animation but then reboot almost immediately before loading the full OS.
Is there any step im missing? What can I do to get a custom mod working on this phone?
More.. Just installed Viper rom from sideload and it booted up, was able to almost finish the htc one setup when a dialog came up that siad "System process not responding" kill/wait.. and then like all the other the phone reooted and now just like AOKP it boots into a black home screen with just some icons on the statusbar then it will sit there and reboot after about a minute.
Please, anybody with some suggestions or insights?
Fixed my problem here's how..:
1. I downloaded the firmware listed on this thread http://forum.xda-developers.com/showthread.php?t=2368907
2. Relocked my bootloader using the HTC-All-In-One program
3. Flashed the firmware image
fastboot oem rebootUU
fastboot flash zip firmware.zip <--- first time will give error, flash a second time will be success
4. Manually power cycle phone after flash finishes
5. Booted into the stock rooted sprint OS finally without any problems. I guess it was the firmware. Wondering if now I can get other mods to work. Not brave enough to try again today.
That's all
Did you have service before it rebooted ?
Sent from my HTCONE using Tapatalk 4
Related
Hi all.
Just recently acquired a sensation xl. I was interested in rooting so I went ahead did it. The volume down key on my sensation is broken, so to combat this I had to perform a temp root and then installed twrp recovery manager. from here , I rebooted to bootloader and unlocked it succesfully following htc dev's instructions.
After all this I flashed the cyanogenmod 9 rom to the device. All was going well.
I started looking at other roms. I decided I wanted to install runny kitkat v17(cyanogen) so I went ahead and downloaded the zip. I also downloaded the lego kernel.zip as I read that you have to flash the kernel too to tun 4.4.
I noticed that twrp recovery had an issue every time I booted to recovery. It would initialise and then display something like "kernel does not support selinux contexts" and then it would remain on the "simulating actions stage". I did not back up before I flashed cm9. I tried to back up several times on twrp but when I try to restore it says "twrp has stopped working"
So at that point I said that I would just flash the runny kitkat c17 rom and kernal from twrp. that didn't work too well. sinc I was unable to recover via twrp, I decided to boot up command prompt, and used command "fastboot recovery "recoveryimagename.img"
After this, the device restarted and now remains on the htc starting screen with the green "HTC" writing.
I think I soft bricked the phone. normally you could enter bootloader mode via phone and try restore stock firmware/ os. However since my volume button is broken and I can't manually load bootloader, I'm left clueless.
Please help me
So Long Story short, Last week my M7 ran out of battery and died.And my phone stuck on the HTC logo, found out the OS was corrupted and somehow the phone wont boot to the OS, so it was soft bricked right?
So i decided to root and install Custom Rom , i already did this :
- Unlocked Bootloader from HTCdev
- Installed Twrp 2.6.3.3 from fastboot
- go to twrp and do a factory wipe , data wipe, reboot recovery
- flash Android revolution rom from OTG , and the aroma installer went smooth, i acidentaly didn't press wipe on the aroma installer, so i was pressing next until it install
- it installed with no problem message,so i reboot
- it did boot to android and the HTC setup screen welcomes me and the phone seems working allright
- but then there's a random reboot , so i decided to reflash the Rom
- this time i press the Wipe on aroma installer
- the installation went smooth , and reboot the system
and now the bootloop started
- So after the HTC one boot screen (with the beats logo on its bottom) , the phone goes into a screen that said "Android Is Upgrading : Optimizing apps 1 of 100something" (well,there's no message like this on the first flash)
- and after it finish optimizing, it reboot and did the same thing twice
- So Yeah, after that my phone booted to the lockscreen, so i swipe up. and the phone Freeze on HTC logo screen
- i can change the volume on that screen, and also took screenshot , but after a minute the phone reboot it self and goes to the same screen afterwards.
after that, i flashed a fresh recovery, and did wipe cache,data,dalvik on twrp, and reflash it again. Still the same problem, i get the "Android Is Upgrading" Message, then boot to the lockscreen, unlock the lockscreen, and there's a white screen with HTC logo
i already tried flashed another rom (artmod) , and checked the MD5 , and also tried another version of twrp which is 2.7.1.1 and still the same. Yeah i did a dalvik/cache wipe after and before flashing
My m7 is S-ON , and i will provide the Hboot details after i charged the phone (yeah it keep boot looping until the battery dead)
what should i do?
Thanks
Hi everyone, I'm having a weird issue since this morning and could not solve it yet, maybe someone can help me.
Basically I tried to dirty flash the new nightly of CM12.1 using TWRP 2.8.6.0 and it got stuck. After rebooting the device I could not get to twrp anymore (strangely) and then I tried to reflash it (two different versions) with no success.
With my device being in this state (without booting into OS and with no recovery access) I had to download the stock 5.0.2 for the XT1068 and flash it using fastboot. It can now boot up normally into stock ROM and restored the stock recovery, but now any custom recovery I flash it does not work. I had two different results on two versions of twrp:
2.8.5.0 - After flashing it and trying to access it the device shows the "unlocked bootloader" screen and then reboots itself and goes to the ROM without even getting into TWRP.
2.8.6.0 - After flashing it and trying to access it the device goes to the "unlocked bootloader" screen and freezes there. I have then to hold the power button for a long time (about 1,5 min) and then the device boots the stock ROM.
Anyone can give any idea of what I can do? I even tried to lock and unlock the bootloader again, flash CWM, flash TWRP and nothing. At least the device is booting, so it is not a urgency, but any help is appreciated!
----------------------------
I got it, a stupid reason for all issues I was having. The issue was with my router, that was set to use a internal firewall which was screwing up a lot of my downloads, and the ROM and TWRP files just got into this issue.
After reconfiguring my router everything worked out, which make me fell stupid for not thinking about this before hahaha, but at least it is fixed
Thanks for everyone who took a time to read this and sorry for any inconvenience!
Hi everyone.
I've android 6 stock (xt1068), and today i woke up and it doesn't work
I try to install the twrp and then to flash rom, ecc, but after that i install the twrp succesfully, when i go in the recovery i see that there is no twrp but the main stock recovery. This thing basically appens with everything that i install/wipe, infact the bootloader tells me that my action worked, but it didn't.
Another thing is that if i let my phone boot up, after the boot animation it tells me 'Starting Android', then this text go out, and for a second the boot animation appears again, after that all the screen goes black. (The phone is not closed, but it is showing black in the screen, i think you got it)
Thank you
Hello today I need help with my GT-I8190 I had trouble booting into TWRP with this device. I tried many times to boot with the boot keybinds but it always seemed to bootloop, once i tried using ADB I got it to work, but something seemed off, It keept bootlooping and the hardware buttons were flashing also if it was connected to charge it wouldnt even boot. So if somebody can help me with this issue or even do something to make it better it would be helpful!
Comment:
I have realised i have installed 3 differnet twrps, I dont know how i did that but I can boot to the 3.0.1 in ADB and boot to a 2.7.1.0 with QuickBoot. Ill tell you if i find a solution
Comment 2: Now i have another problem, im stuck in a boot loop, I am using a custom rom cyangoenmod 12.1 or 12.0.
Flashed stock rom and it boot loops on there too
Sucessfully fixed this problem after a long time, Turns out the bootloader had a update which broke the recovery combination! so if you are watching this and have the same problem here is a file to fix it! (flash in BL)