Related
what are the pros or cons of upgrading to the latest nighly from cm 7.1.0-rc1?
Look here.
Honestly, I'd say all pros and no cons. I forget when deep sleep was fixed, but there's that, USB host mode, integrated Dal's OC kernel, nightly 150 brought with it a fast bootup, and those are just the main things I can think of off the top of my head.
Do they have a set of instructions for install in one place or do I need to read through the thread for that? I remember there being things about uboot and stuff but I haven't read in a while.
do you lose all you settings/apps if you just delete devlick cache? im on nightly 87 now...
Sent from my NookColor using Tapatalk
I thought I would finish my upgrading of my Nook at cm 7.1.0-rc1. I was getting Sleep Of Death (SOD) and had read that some of the new nightlies had Dalingren's OC inbuilt so went the nightly option (now am on #150).
So if you have ROM Manager (Paid), then going to Nightlies is very easy and has all the new features. ROM Manager updates you on a new build and it is a quick download and install. Nightlies also do not reset your device. Dalvik and Cache do not lose your settings as well. So, if you have ROM Manager, I would go the nightlies (just make sure you backup everything).
I am not going to guarantee it will fix everything, hence keep upgrading but have some workarounds in place.
Pros:
- All the new features and fixes (you will see improved speed, smoothness, Dalingren's OC inbuilt). Am on #150.
- Easy to do (if on ROM Manager paid). Easy to do in general but ROM Manager simplifies in general.
Cons:
- Be prepared that you backup everything. Nightlies are beta and you could have to go back to previous rom or fresh install (everyone suggests a fresh install is optimum but have only done once).
- Difficult settling for one build. You end up upgrading quite frequently and a new one can potentially break things (only happened to me once where I had to go back to a previous build). You also end up checking the comments of the next build, thinking that the next one will be the perfect build.
nolook said:
do you lose all you settings/apps if you just delete devlick cache? im on nightly 87 now...
Sent from my NookColor using Tapatalk
Click to expand...
Click to collapse
No, you do not.....
I´ve been researching this forum for the last week since I´ve got my new Kindle Fire 2nd. Generation. with software version 10.1.1 already rooted using this method and now I´m in doubt about the next step.
Whats the best option? Go with a custom CM7 or CM10 ROM? Stay with the custom firmware and just use one of the several custom launchers to get rid of the horrible Amazon Carousel interface?
Is the CM10 ROM stable enough? All of the functions work properly? Is battery severely affected?
Also I cant seem to find a simple step by step guide for installing CM10 for the KF 2nd Gen.
Most of the content seem to be for the Kindle Fire 1st. Gen or for the new Kindle Fire HD.
Thanks!
Generally speaking (I can't testify to how well CM10 runs on the KF), I prefer to use the existing Android base that is installed and customize THAT rather than using a custom ROM. Amazon optimizes the version of Android to support the hardware so using that will generally have the best battery life and best performance.
I rooted my KFHD 7" and installed Go Launcher EX. Using that launcher and a few more tweaks like using Google Play and Chrome browser work extremely well.
CM 10 has many things wrong with it, and it should not be used as a daily driver. I recommend for the moment enjoying, the amazon rom, or you can mess around with the other if your willing to test things.
iMJets said:
CM 10 has many things wrong with it, and it should not be used as a daily driver. I recommend for the moment enjoying, the amazon rom, or you can mess around with the other if your willing to test things.
Click to expand...
Click to collapse
thanks for the tip! I will choose the custom rom route then, so I'm wondering, is there any safe way to prevent the ROM updates from Amazon? (in order to keep my KF rooted and with my configuration.
Thanks
Took me 30seconds to find the thread
http://forum.xda-developers.com/showthread.php?p=21525089
But you have to have root access to your kindle!
Hondologe said:
Took me 30seconds to find the thread
http://forum.xda-developers.com/showthread.php?p=21525089
But you have to have root access to your kindle!
Click to expand...
Click to collapse
All of the methods I´ve been reading about blocking updates seem unreliable, with users reporting finding the Kindle with a new updated ROM after an automatic update and things like that, thats why I´m asking.
Regarding that, is better to leave my KF rooted with firmware 10.1 or update it to the latest firmware version?
Thanks for the patience and the tips!
Hi guys I bought my touchpad and the previous owner has aokp 40 running ics installed. Obviously I want to upgrade to more stable and current cm10. I know nothing about aokp and the recovery menu is quirky on the touchpad does anyone have experience with this upgrade?
I've listened to the idiots guide to installing cm10 from revkjr that work to go from aokp to cm? I really don't know the differences between these roms, most of my experience is with cm
Sorry if repost this topic isn't easily found on Google/forums
Aggieeric said:
Hi guys I bought my touchpad and the previous owner has aokp 40 running ics installed. Obviously I want to upgrade to more stable and current cm10. I know nothing about aokp and the recovery menu is quirky on the touchpad does anyone have experience with this upgrade?
I've listened to the idiots guide to installing cm10 from revkjr that work to go from aokp to cm? I really don't know the differences between these roms, most of my experience is with cm
Sorry if repost this topic isn't easily found on Google/forums
Click to expand...
Click to collapse
How is the recovery menu quirky? If something is odd about it, update it first before anything else. Otherwise, the procedure for flashing CM and AOKP are the same. Download full wipe, and flash.
Aggieeric c said:
Hi guys I bought my touchpad and the previous owner has aokp 40 running ics installed. Obviously I want to upgrade to more stable and current cm10. I know nothing about aokp and the recovery menu is quirky on the touchpad does anyone have experience with this upgrade?
I've listened to the idiots guide to installing cm10 from revkjr that work to go from aokp to cm? I really don't know the differences between these roms, most of my experience is with cm
Sorry if repost this topic isn't easily found on Google/forums
Click to expand...
Click to collapse
Have a read of this excellent guide http://forum.xda-developers.com/showthread.php?t=2111734 it will have all the links you may need.
First off, if it doesnt have the latest CWM Recovery on it, you can get it here:
http://forum.xda-developers.com/showthread.php?t=2170454
Second, After you update your recovery, all you need to do is download a CM10 ROM and the Gapps, boot into recovery and wipe data, cache and dalvik and flash both files. That should be it.
I see alot of Tocuhpad Dev threads and I just pulled my TP out of storage.
Its running Cyanogen Mod 4.0.4 (System settings says Cyanogen Mod Version 9-20120930 Nightly tenderloin)
Build date Sun Sept 30th 2012
I have CWM-based Recovery v5.0.2.6
moboot 0.3.5
As you can see its very outdated.
What should I be running now if I am looking for daily reliability with most features working? Thanks for your input (If there is a newer guide I can follow to update from my current version to a new one please post it, thank you)
I would suggest that you read this http://forum.xda-developers.com/showthread.php?t=2147284.
It is an excellent guide with video tutorials if necessary. Roland has also posted an additional guide of the newer more experimental Roms also in Touchpad Development forum.
Hopefully they will help you make a decision based on what you need to use your tablet for ie Bluetooth/gaming etc.
Have fun there have been lots of improvements since you last used it.
sstar said:
I would suggest that you read this http://forum.xda-developers.com/showthread.php?t=2147284.
It is an excellent guide with video tutorials if necessary. Roland has also posted an additional guide of the newer more experimental Roms also in Touchpad Development forum.
Hopefully they will help you make a decision based on what you need to use your tablet for ie Bluetooth/gaming etc.
Have fun there have been lots of improvements since you last used it.
Click to expand...
Click to collapse
Where do you even start on that thread, there is about 100 links and 15 videos posted?
gt5oh said:
Where do you even start on that thread, there is about 100 links and 15 videos posted?
Click to expand...
Click to collapse
Just read the first page, then try a couple of different ROMs at the very least you can see all the different variations available and the requirements needed to install them(Partition size.
If you then have a specific question having tried the above it will probably be a lot easier to help you.
Personally, I would go with milaq's last Jelly Bean 4.2.2 rom cm10.1
The next step is 4.3 - read need for resizing of /system, and/or /data partitions - or 4.4 (Kitkat), which is still very much experimental/developmental.
Milaq's 10.1 Jelly Bean roms are very stable and good for daily use.
Just my opinion!
Peace
Thanks, I actually went the opposite way and did the test version of 4.4 to see how it is
It appears you are already partitioned to run the newest ROMs, but if you or others want to try at least a 10.1 ROM (Android 4.2.2) without having to increase partition size, OaT's Light n Tasty (LnT) is very stable and except for the lack of bluetooth plaguing a number of the post-CM9 ROMs the ROM is very solid. He somehow lightens the ROM and the GAPPs so it runs in the pre-CM10 partitions. I am leery of going all the way back to webOS, removing Android, doctoring and changing partitions, and then starting over. At some point I am sure I will, especially if a really solid KitKat ROM is released with bluetooth.
Many people have stayed on CM9 btw, as they find CM9 the most dependable.
Here's a link to the XDA discussion on OaT LnT. Note his OP has an older version of his ROM... if you scroll towards the end he includes a link to an October 8 version he has been using recently. Make sure to also use the GAPPs he includes in the OP, since it is lightened as well. He leaves off a few things... like calendar and browser, since so many people can and do use ones downloaded from Play Store (is. I use aCalendar and Next browser).
http://forum.xda-developers.com/showthread.php?t=2332510
CM 10.1 (JB 4.2.2) doesn't require repatitioning, its the newer 10.2/4.3 and Kitkat 4.4 that require/advise a larger /system partition.
I actually went back to ICS from 10.1 thinking it had been better, but tbh the experience wasn't what I remembered and I very quickly went back to 10.1 (via Kitkat, briefly, but too buggy for me atm). Battery life, responsiveness and stability were all better, for me, with 10.1 (spceifically milaq's roms).
Having said that, its worth giving yourself a bigger /system partition - 5 or 600mb - and trying out the latest kitkat builds, there's lots of promise there!
I will definitely be going back once certain bugs and issues are ironed out...
Peace
Hi
Just received a Nook HD+ but after quickly browsing and playing for a while, I was not pleased with the stock rom, scrolls were not as smooth as I had seen on my nexus 4 for nexus 7 (maybe I am spoilt), I could notice some jitters and hope a custom ROM could fix this.
When I see in the Android development forum for this device, as usual the very many listing of the ROMs makes it difficult to identify which is the latest and the stable one (I suggest in future we should group the threads as - stable and non-stable which will help Noobs like me to jump into the act immediately).
Can somebody please advise me this bit of information as to which is the most latest custom rom that is stable, I am guessing it could the 10.1 build here [NookHD+] CM10.1 native emmc install Now part of CM Nightlies . Also to a step by step resource starting from rooting to the final flashing of the custom rom.
Also, is it possible to use 'Cyonogenmod installer' instead directly from their website!?
thanks
S
reply cm
Believe me I tried everything on nook.my initial thoughts were to run on SD card.but you have no official stable ROM for SD card .and the one available from bookbane was quite laggy .I tried both cm 11 and cm 10.2.then I installed on emmc again cm 11,cm 10.1 ,xperia ROM.but trust me the best experience I had so far was from cm10.2 on emmc .works beutiffully without any lag.
Just received a Nook HD+ but after quickly browsing and playing for a while, I was not pleased with the stock rom, scrolls were not as smooth as I had seen on my nexus 4 for nexus 7 (maybe I am spoilt), I could notice some jitters and hope a custom ROM could fix this.
When I see in the Android development forum for this device, as usual the very many listing of the ROMs makes it difficult to identify which is the latest and the stable one (I suggest in future we should group the threads as - stable and non-stable which will help Noobs like me to jump into the act immediately).
Can somebody please advise me this bit of information as to which is the most latest custom rom that is stable, I am guessing it could the 10.1 build here [NookHD+] CM10.1 native emmc install Now part of CM Nightlies . Also to a step by step resource starting from rooting to the final flashing of the custom rom.
Also, is it possible to use 'Cyonogenmod installer' instead directly from their website!?
thanks
S[/QUOTE]
dajmaa said:
Believe me I tried everything on nook.my initial thoughts were to run on SD card.but you have no official stable ROM for SD card .and the one available from bookbane was quite laggy .I tried both cm 11 and cm 10.2.then I installed on emmc again cm 11,cm 10.1 ,xperia ROM.but trust me the best experience I had so far was from cm10.2 on emmc .works beutiffully without any lag.
Just received a Nook HD+ but after quickly browsing and playing for a while, I was not pleased with the stock rom, scrolls were not as smooth as I had seen on my nexus 4 for nexus 7 (maybe I am spoilt), I could notice some jitters and hope a custom ROM could fix this.
When I see in the Android development forum for this device, as usual the very many listing of the ROMs makes it difficult to identify which is the latest and the stable one (I suggest in future we should group the threads as - stable and non-stable which will help Noobs like me to jump into the act immediately).
Can somebody please advise me this bit of information as to which is the most latest custom rom that is stable, I am guessing it could the 10.1 build here [NookHD+] CM10.1 native emmc install Now part of CM Nightlies . Also to a step by step resource starting from rooting to the final flashing of the custom rom.
Also, is it possible to use 'Cyonogenmod installer' instead directly from their website!?
thanks
S
Click to expand...
Click to collapse
[/QUOTE]
Could you please point me to the source please with instructions to the best experience ROM 10.2!? will this autoupdate to any other new updates from Cyanogenmod?
thanks
S
Could you please point me to the source please with instructions to the best experience ROM 10.2!? will this autoupdate to any other new updates from Cyanogenmod?
thanks
S[/QUOTE]Go to the dummies guide for installing CM10.1/CM10.2 linked in my signature.
Sent from my SCH-i705 using Tapatalk
CM11
Best choice for HD+ is CM11 EMMC from verygreen.
It's officially supported by Cyanogemod and gets nightly updates.
The ROM is smooth and efficient.
There may be tiny little bugs for the ROM, but they won't stop you from using your device as a daily driver.
3/27 is very stable btw.
CM 10.2.1. vs. CM 11
After reading some of the posts here, I decided to "downgrade" from CM 11 0327 to the last stable CM 10, 10.2.1. (Per dajmaa's suggestion.)
I'd never tried CM 10 before. When I got my HD+ a few weeks ago, I went from the Nook stock ROM direct to a CM11 SD install (0308) and then ended up at CD 11 0327 on emmc the other day.
While CM 11 was usable for me (except for one annoying problem, where I couldn't download mp3's), I see that CM 10 is much more finished. For example, it has zRam implemented. (But maybe KitKat doesn't need that, with it's ostensibly better memory management?) Trebuchet launcher works like it's supposed to in CM 10.2.1, although I liked the ability to enlarge the icons in CM 11. And the font in the status bar seemed bigger to my old eyes in CM 11 than CM 10.
Lagwise, they both seem the same. No lag, although I noticed that CM 10 gets "stuck" every now and then when I switch back and forth quickly between apps. And it keeps wanting to put "Extended Desktop" in the Power menu.
I haven't had it running long enough with my aviation moving maps to see if I get any random reboots like I did with CM 11.
As JimJ2Mz said, 0327 runs well. (Except that I couldn't download podcasts.)
But I'll plan to stay put now until there's some major announcement about CM 11, like a RC or something.
JimJ2Mz said:
Best choice for HD+ is CM11 EMMC from verygreen.
It's officially supported by Cyanogemod and gets nightly updates.
The ROM is smooth and efficient.
There may be tiny little bugs for the ROM, but they won't stop you from using your device as a daily driver.
3/27 is very stable btw.
Click to expand...
Click to collapse
Thanks Jim, I installed 10.2.x after trying out 10.1.3 for some time. I notice, GAPPS crashing randomly once in a while although not that too bad. Sometimes hangs for a while before it gets normal. So I guess there are still some bugs around. So was wondering 10.1.3 must be the one for me unless something stable comes up.
Now I see your post, and wondering why not I try it if there is going to be future updates. Do you feel it is smoother than the 10.1.x and 10.2.x as we all know KitKat is designed to run better on older hardware? If so I will proceed with CM11 and live minor bugs if that is not going to stand in the way of my daily usage like you mentioned.
sany said:
Thanks Jim, I installed 10.2.x after trying out 10.1.3 for some time. I notice, GAPPS crashing randomly once in a while although not that too bad. Sometimes hangs for a while before it gets normal. So I guess there are still some bugs around. So was wondering 10.1.3 must be the one for me unless something stable comes up.
Now I see your post, and wondering why not I try it if there is going to be future updates. Do you feel it is smoother than the 10.1.x and 10.2.x as we all know KitKat is designed to run better on older hardware? If so I will proceed with CM11 and live minor bugs if that is not going to stand in the way of my daily usage like you mentioned.
Click to expand...
Click to collapse
When you updated to CM10.2, did you also update to 20120813 gapps? That could be the reason for your gapps problems if you didn't.
And an HD+ is not 'older hardware'.
I recommend CM10.1.3 as the most stable.
Sent from my BN NookHD+ using XDA Premium HD app
sany said:
Thanks Jim, I installed 10.2.x after trying out 10.1.3 for some time. I notice, GAPPS crashing randomly once in a while although not that too bad. Sometimes hangs for a while before it gets normal. So I guess there are still some bugs around. So was wondering 10.1.3 must be the one for me unless something stable comes up.
Now I see your post, and wondering why not I try it if there is going to be future updates. Do you feel it is smoother than the 10.1.x and 10.2.x as we all know KitKat is designed to run better on older hardware? If so I will proceed with CM11 and live minor bugs if that is not going to stand in the way of my daily usage like you mentioned.
Click to expand...
Click to collapse
In my own experience, yes, CM11 feels much more fluid than the older versions.
4.4 RAM usage is optimized for older hardware, which actually benefits ALL devices, but that doesn't mean that the Nook HD/HD+ is old. It's modern and is still very powerful, just as leapinlar said. Well, not powerful, but not weak. Haha.
And as leapinlar also recommended, CM10.1.3 is indeed stable. Anyway. It's up to you. I've had my experiences with the ROMs and they can differ from others, so it's all up to you whether you want to try CM11 or stick to any other ROM.
JimJ2Mz said:
In my own experience, yes, CM11 feels much more fluid than the older versions.
4.4 RAM usage is optimized for older hardware, which actually benefits ALL devices, but that doesn't mean that the Nook HD/HD+ is old. It's modern and is still very powerful, just as leapinlar said. Well, not powerful, but not weak. Haha.
And as leapinlar also recommended, CM10.1.3 is indeed stable. Anyway. It's up to you. I've had my experiences with the ROMs and they can differ from others, so it's all up to you whether you want to try CM11 or stick to any other ROM.
Click to expand...
Click to collapse
I tried CM11 but it was throwing lots of google app erros on load, I was actually using the same GAPPS file that was on the 10.2.1, is there a used diferent GAPP file for CM11? maybe that caused the error. And also I struggled to go back to the CWM recovery for CM10.1 and 10.2 as it was just stuck at the recovery used for CM11 even after flashing the ver.3 recovery zip several times.
I have literally tried every single ROM out there and here are my recommendations:
1. Succulent's CM 11 (http://goo.im/devs/succulent/ovation/cyanogenmod/internal)
2. Official CM 10.2 Stable (I have been using it with drmarble's Kernel, which you can get here: https://app.box.com/s/ry03xsmhlxq2jomnwlaj)
Both ROMs are bug-free and run flawlessly. I get around 6 hours of screen-on time on both (which is an amazing battery life).
OH GEEZ
sany said:
I tried CM11 but it was throwing lots of google app erros on load, I was actually using the same GAPPS file that was on the 10.2.1, is there a used diferent GAPP file for CM11? maybe that caused the error. And also I struggled to go back to the CWM recovery for CM10.1 and 10.2 as it was just stuck at the recovery used for CM11 even after flashing the ver.3 recovery zip several times.
Click to expand...
Click to collapse
DUDE YOU HAVE TO USE GAPPS DEDICATED FOR CM11 (4.4)!
That's a given. You're having errors due to the fact that you're using 4.2 gapps on 4.4!
Follow this guide and FIX EVERYTHING. I followed it myself it everything works perfectly.
Please do ask if you need help on anything. I may be a noob, but I do know some stuff.
http://forum.xda-developers.com/showthread.php?t=2602796
Thanks Jim
JimJ2Mz said:
DUDE YOU HAVE TO USE GAPPS DEDICATED FOR CM11 (4.4)!
That's a given. You're having errors due to the fact that you're using 4.2 gapps on 4.4!
Follow this guide and FIX EVERYTHING. I followed it myself it everything works perfectly.
Please do ask if you need help on anything. I may be a noob, but I do know some stuff.
http://forum.xda-developers.com/showthread.php?t=2602796
Click to expand...
Click to collapse
Thanks Jim, I will do this. Why do you think I was unable to go back to CWN recovery for 10.1/10.2 - everytime after flashing the old recovery and go into the recovery mode, I still see the ver.6 (of CM11) in action.
S