[KERNEL][4.1.2][03 Jan.] ★ LiteGX v5.8.0 ★ <><> ... DISCONTINUED !!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WARNING : THIS KERNEL IS ONLY FOR ANDROID 4.1.2 (SAMSUNG) !
This is a pure LITE, STOCK WAY & STABLE kernel with MINIMAL features.
If you are looking to a kernel with less features and more close to stock, check out my StockGX kernel.
My goal is to offer a slight modification of our Samsung stock kernel's, with few features, aiming a better battery life than stock without affecting any drain.
This is a kernel "plug-and-play" or I would say more "flash-and-play". No need for tools or apps to configure the kernel. This is the way I wanted it. A bit like speedmod kernel did.
Unfortunately, I'am not a developer but just a basic person with some android/linux knowledge already.
My dream was one day to create my own kernel, and thanks to great developers that answered my many questions, this dream has been possible. I'am very happy and proud to share my first ever kernel to everybody here.
It must be only flashed over an official Samsung ROM and not AOSP/AOKP !
Feel free to include my kernel to your ROMs / Threads but please don't forget to inform/ask first via PM and credit me in your original thread.
★ FEATURES (up-to-date) ★ :
Base :
Directly based on update11 source from Samsung (for clean work and stability).
Compiled with ARM EABI (v4.4.3) toolchain (with flags optimizations).
Ramdisk from XXEMD3 (for update10 ROMs compatibility without the need to change radio).
Main :
ZZMoove (v0.7d) governor (added and set as default). Many profiles included, grab them below.
ROW (v4) optimized and as only I/O scheduler.
Wolfson Boeffla Sound (v1.6.4 drivers) compatibility.
hardcore mDNIe tweaks (for better colors + sharpness fix for better readability).
Touch-to-Wake (v1.1a) (but disabled by default). Many profiles included, grab them below.
USB charging increased (to 900mA instead of 475 by default).
Allow manual brightness to 300 candela.
zRam added (but disabled by default) with LZ4 compression and 4x swaps. Many profiles included, grab them below.
init.d support.
CRT-off effect friendly (early_suspend set to 100ms).
Native ExFAT support (from official Samsung source).
xbox controller support.
Triangle Away support.
Various tweaks :
4x zRam swaps capability (instead of single one).
Optimized ARM CPU topology.
"GENTLE_FAIR_SLEEPERS" disabled.
"ARCH_POWER" enabled.
"SCHED_MC" added. Many profiles included, grab them below.
"CONFIG_SCHED_AUTOGROUP" enabled.
ROW scheduler & blk-core tweaks.
"Westwood", "HTCP" and "BIC" TCP congestion control modules added. Many profiles included, grab them below.
Enabled persistent TRIM support for all partitions.
Fully compressed libs ".ko" modules.
Automatic dalvik-cache wiping in kernel flashing procedure.
Logging and debugging tweaks :
Android logger disabled.
Kernel logger disabled.
Disabled kernel debugging : Samsung / sec_log / last_kmsg / touchscreen / modem / max77686 / sec_watchdog.
Disabled various debug in defconfig.
Features that will NEVER be included in this kernel :
Overclock / Underclock / Undervolt.
auto-root
LED control.
Charge control.
Master sequence (screen calibrated).
ABB (Adaptive Body Bias).
Any upgrade of Linux kernel 3.0.XX.
STweaks compatibility.
Dual-Boot Sammy/AOSP.
CyanogenMod compatibility.
MIUI compatibility.
etc.
★ PREREQUISITE ★ :
Any odexed or deodexed international I9300 Samsung 4.1.2 Jelly Bean ROM.
A custom recovery (CWM recommanded) to flash the kernel.
★ FREQUENTLY ASKED QUESTIONS ★ :
How can I customize this kernel ? :
> Mainly with ZZMoove/zRam profiles (grab them below) and with TricksterMOD / SetCPU apps.
What does the LiteGX cleaner script ? :
> It deletes all ZZMoove/zRam profiles that you flashed after this kernel. So you can go in another kernel safely. It don't removes anything else since this kernel is pure stock based and don't add any files/folders that need to be deleted after. This cleaner script will be only efficient in this situation only, it does not clean anything before coming from another kernel to mine.
Do I need to wipe cache + dalvik each time I flash a new kernel version ? :
> Nope. Moreover dalvik cache is already wiped automatically during flashing procedure.
Do I really need to flash any profiles/scripts ? :
> Definitely not. It's user choice to do it but zRam profiles for example are highly recommanded to be flashed since it adds a lot of smoothness and performance to the kernel (and on which is disabled by default).
Do I need to re-flash ZZMoove ZIP profiles each time I flash a new kernel version ? :
> Nope. It just install an init.d script, so it will be permanent until you delete files from your init.d folder or flash "Cleaner" version which will do this for you.
Do I need to remove old ZZMoove profiles manually before flashing a new profile ZIP ? :
> Nope. Each ZIP's include an automatic removal of previously used profile.
Android OS usage is very often at top of my battery stats ! :
> Try wiping cache and dalvik cache manually in your favorite CWM, then make a full charging until green led appears.
★ SOURCES ★ :
Github >> LiteGX.
Need supports ? all kind of questions must be posted on this thread directly. Be sure to read at least completely this first post before asking any question.
If you enjoy this kernel, don't forget to rate it
stars, and clicking the 'thanks' button (right below) is always appreciated to keep this thread maintained
LIKE MY WORK ?
OFFER ME A
!
Changelog + links
★ All ZZMoove / zRam / Cleaner scripts can be found HERE ★★ All oldest releases can be found HERE ★
★ CHANGELOG ★ :
03.01.2013 : v5.8.0 released.
Disabled "CONFIG_SCHED_AUTOGROUP" (useless in Android).
xbox controller now loaded as internal module (instead of external).
30.12.2013 : v5.7.0 released.
Now compiled with stock Android ARM EABI 4.4.3.
28.12.2013 : v5.6.0 released.
Touch-to-Wake is now disabled by default (for battery purpose).
Added some "Touch-to-Wake profiles" into scripts folder :
- Touch-to-Wake_disabled(stock).zip
- Touch-to-Wake_enabled_3s.zip
- Touch-to-Wake_enabled_5s.zip
- Touch-to-Wake_enabled_8s.zip
- Touch-to-Wake_enabled_10s.zip
- Touch-to-Wake_enabled_15s.zip
Updated "LiteGX-KERNEL_full_cleaner.zip" to match new Touch-to-Wake flashable ZIP's (please remove old one).
15.12.2013 : v5.5.0 released.
ramdisk : re-enabled lowmemory killer in 'init.rc'.
SCHED_MC disabled back by default (0) to avoid some people facing some lags due to agressive value (moreover, I prefer to trust ZZMoove stock behaviour).
Added some "SCHED_MC profiles" into scripts folder :
- "SCHED_MC_power_savings_0(stock).zip"
- "SCHED_MC_power_savings_1.zip"
- "SCHED_MC_power_savings_2.zip"
It will be useful for those who wants to change it without the need to use TricksterMOD (etc) anymore.
Updated "LiteGX-KERNEL_full_cleaner.zip" to match new SCHED_MC flashable ZIP's (please remove old one).
05.12.2013 : Flashable ZIP's adding.
Added some "TCP congestion profiles" into scripts folder :
- "TCP-congestion_bic.zip"
- "TCP-congestion_westwood.zip"
- "TCP-congestion_htcp.zip"
- "TCP-congestion_reno.zip"
- "TCP-congestion_cubic(stock).zip"
It will be useful for those who wants to change it without the need to use TricksterMOD (etc) anymore.
Updated "LiteGX-KERNEL_full_cleaner.zip" to match new TCP flashable ZIP's (please remove old one).
02.12.2013 : v5.4.0 released.
zRam is disabled as default again (this time for ever), for battery purpose at the cost of a bit less multitasking (if you want it again : just flash any zRam script).
"GENTLE_FAIR_SLEEPERS" disabled (back), should improve UI responsiveness.
Updated "zRam_disabled.zip" to match new zRam disabling as default (please delete old one).
28.11.2013 : v5.3.0 released.
zRam is now initialized by default once flashing the kernel with 600MB disksize and 100% swapiness. If you feel some lags, try different values with scripts (hope it will help people finding this kernel more smooth than default without it).
All zRam scripts has been reworked and updated (please delete olders and download latest ones). If you want to turn off zRam, this time you'll have to flash "zRam_disabled.zip" file.
zRam initialization is now using a custom busybox binary directly integrated in the kernel, it will avoid some people not having their zRam properly working due to some roms busybox which cannot execute 'swapon' shell command and with priorities.
- A little reminder : to check if your zRam is working, no more need to install Turbo zRam app, on a Terminal, write : "free" (if you see swap values, then zRam is working) or "cat /proc/swaps" (which will give you more informations on both 4 swap partitions).
- I would like to thanks personally my friend @Yank555 to help finding some zRam initialization problems.
Clic below to see older changelog ..
21.11.2013 : v5.2.0 released.
ramdisk : 'root helper' is back (same as v4.6.1).
Add several TCP congestion control modules :
- Westwood
- BIC
- HTCP
'cubic' TCP congestion will stay as default like stock. You can set your favorite congestion module via TricksterMOD app.
19.11.2013 : v5.1.0 released.
Enabled back: Persistent TRIM support for all partitions.
Enabled back: USB charging increased (to 900mA instead of 475 by default).
18.11.2013 : v5.0.0 released.
Total redesign again from Samsung update11 source.
Removed a LOT of tweaks (back to 'stock way' for real), battery life should be much better than before.
List of removed tweaks :
- Removed: NTFS support.
- Removed: CIFS support.
- Removed: NFS support.
- Removed: Reduced WiFi wakelock.
- Removed: Reduced battery-monitor wakelock timeouts.
- Removed: Proportional Rate Reduction for TCP.
- Removed: Network speed tweak.
- Removed: Decreased touch boost frequency (from 800 to 600Mhz).
- Removed: MMC : Fix the workqueue overload battery waste.
- Removed: MMC : Increased timeout limits for bad sdcards.
- Removed: Doubled min-max readahead.
- Removed: ipv4: save CPU cycles from "check_leaf()" (backport from Linux 3.8).
- Removed: Intelli memory writeback (0 when screen ON & 500ms when screen off).
- Removed: Higher random entropy.
- Removed: Enabled persistent TRIM support for all partitions.
- Removed: Dynamic FSync control (v1.2).
- Removed: Dynamic Screen Frequency Scaling capability (for ZZMoove governor).
- Removed: "GENTLE_FAIR_SLEEPERS" disabled.
- Removed: USB charging increased (to 900mA instead of 475 by default).
- Removed: "cpu_load_slope" correctly set.
- Removed: bcmdhd : Disabled multicast on suspend.
- Removed: AIO enabled (backport of Linux 3.6.x) and tweaked.
Some optimizations into litegx_defconfig.
Overall kernel size is now slightly lighter (again) than previous version.
17.11.2013 : v4.6.2 released.
ramdisk : Fixed zRam which was enabled at boot by default.
ramdisk : Modified 'root helper tweaks' (again) to remove many useless lines, which finally now finally looks like more as an 'init.d helper'.
ramdisk : Many useless files in 'sbin' folder has been removed to let only needed ones for 'root helper tweaks'.
Overall kernel size is now slightly lighter than before.
14.11.2013 : v4.6.1 released.
ramdisk : included 'root helper tweaks' from adam kernel but modified to fit the needs of LiteGX kernel only (removed build.prop and pegasusq governor tweaks).
10.11.2013 : v4.6.0 released.
Updated compilation toolchain Linaro GCC from 13.09 to 13.10 (20131014).
05.11.2013 : v4.5.6 released.
AIO enabled.
Backport AIO from Linux 3.6.x.
AIO tweak : Don't plug the I/O queue in do_io_submit().
03.11.2013 : v4.5.5 released.
Enabled "ARCH_POWER" to use 'arm_cpu_topology' power management features.
litegx_defconfig : Added "CONFIG_TOUCH_WAKE".
28.10.2013 : v4.5.4 released.
Disabled "GENTLE_FAIR_SLEEPERS" (should improve UI responsiveness).
27.10.2013 : v4.5.3 released.
"sched_mc_power_savings" set to aggressive value (2) by default.
17.10.2013 : v4.5.2 released.
Decreased touch boost frequency from 1000 to 600Mhz (should slightly decrease smoothness, but be a bit more battery friendly).
15.10.2013 : v4.5.1 released.
Increased touch boost frequency from 800 to 1000Mhz (should boost smoothness a bit without affecting much battery).
09.10.2013 : v4.5.0 released.
Kernel logging (linux printk) disabled (credits to @Lord Boeffla).
litegx_defconfig : disabled some more debug.
05.10.2013 : ZZMoove profiles updated.
All ZZMoove profiles updated to latest revision (thanks to @Yank555).
Removed "ZZMoove_LCDFreq_optimizations_removal.zip" and included it directly in "ZZMoove_Profiles_Cleaner.zip" instead.
Changed priorities into scripts for init.d : "S98" for every ZZMoove profiles and "S99" for LCDFreq optimizations, to override ones already included in S98 profiles.
Modified "LiteGX-KERNEL_full_cleaner.zip" to proper remove new "S98" profiles.
01.10.2013 : v4.4.4 released.
zRam is now disabled by default (to stay as stock as possible).
zRam : set default to 4 devices instead of 1 (resulting Turbo zRam app compatibility from @rlorange).
Removed all zRam scripts to create some new with 4x zRam swaps instead of single ones. Should be MUCH smoother than single zRam (not a single lag detected after hard use of few hours). As always, you can flash new zRam scripts without the need to delete anything from init.d, since it will do it automatically.
Please remember that all my provided scripts are NOT necessary. They are just here for confirmed people or those who wants to increase smoothness or battery life a bit. Stock flashing will always provide best balance. Don't worry, this kernel will always stays like I wanted to do it : a "flash-and-play" one firstly.
29.09.2013 : v4.4.3 released.
Changed default zRam swappiness value from 90% to 80%.
Restored Boeffla Sound v1.6.4 original work with saturation prevention, since it was useless to remove it (just select "Over-saturation Supress" in "Graphical Equalizer" in Boeffla Sound app).
29.09.2013 : v4.4.2 released.
Changed default zRam disksize and swappiness values from 200MB / 10% to 600MB / 90% (thanks to @Yank555 for the tips).
Added 3 new zRam scripts with 90% swappiness.
29.09.2013 : v4.4.1 released.
Updated compilation toolchain Linaro GCC from 13.08 to 13.09 (20130903).
27.09.2013 : some changement about scripts.
All "ZZMoove profiles" has been removed from post #1. You can grab now them directly at top of post #2.
Added several zRam profiles (300/600/800 MB disksize, and 80/100% swappiness) scripts.
Added a full cleaner ZIP for those who want to remove cleanly everything from this kernel and want to migrate to another one.
27.09.2013 : v4.4.0 released.
Introducing zRam (with stock values for the moment). Should increase performance. Use zRam & Swap Control (made by @rlorange) to set your values and make init.d scripts like you want; or directly use my scripts HERE.
zRam : added LZ4 compression and using it as default.
Activated native ExFAT support.
Now using "make mrproper" (instead of "make clean") to stay with local number #1 (thanks @googy_anas for the tips).
22.09.2013 : v4.3.5 released.
ipv4: save CPU cycles from "check_leaf()" (backport from linux 3.8) (thx @googy_anas).
22.09.2013 : v4.3.4 released.
Fixed Boeffla Sound saturation prevention which wasn't removed since v4.0.0 (sorry about this, just saw it).
21.09.2013 : v4.3.3 released.
Hotfix from v4.3.2 : added spica1234's missing line tweak about "persistent TRIM support".
21.09.2013 : v4.3.2 released.
Enabled persistent TRIM support for all partitions (credits to @spica1234).
Added automatic dalvik-cache wiping in kernel flashing procedure.
20.09.2013 : v4.3.1 released.
Updated "Touch-to-Wake" from 1.1 to v1.1a again.
18.09.2013 : v4.3.0 released.
Updated "Dynamic FSync control" from v1.1 to v1.2 again.
NTFS support.
NFS support again.
CIFS support again.
sched: LOAD_FREQ tweak (this time definitely) removed.
18.09.2013 : v4.2.0 released.
Fixed "Dynamic FSync control" which was not working ("dyn_sync_cntrl.c" file was missing).
CONFIG_SCHED_AUTOGROUP enabled again (smoothness should be back).
Added again : Intelli memory writeback (0 when screen ON & 500ms when screen off).
Added again : sched: LOAD_FREQ (4*HZ+122) avoids loadavg Moire.
Touch-to-Wake back from v1.1a to v1.1 for the moment.
15.09.2013 : v4.1.0 released.
Updated compilation toolchain to Linaro GCC 4.7 from 20130626 to 20130812.
USB charging increased back to 900mA (instead of 475 by default).
15.09.2013 : v4.0.0 released.
Total beginning from zero (clean update11 sources) again.
"Android OS" battery drain on top is now gone.
Kernel is now cleaner than before : almost everything has been made using git patches, and minimally manually.
Litest release ever (5,42 MB), smoothest and best battery friendly release ever too.
Releases will now be "x.x.x" (latest number for minor fixes/tweaks, the middle one for good ones, and the first one for major ones).
Removed a lot of tweaks since v3.6, which was useless or that I don't want to include anymore to stay as close as possible from stock. I prefered to let only important and relevant tweaks for now.
List of modified features :
CIFS / NFS support removed.
Intelli memory writeback removed.
AIO tweak: No plug I/O queue in "do_io_submit()" removed.
CONFIG_SCHED_AUTOGROUP is now disabled.
sched: LOAD_FREQ (4*HZ+122) avoids loadavg Moire removed.
Reverted USB charging from 900mA back to 475mA default value.
Reverted "Dynamic FSync control" from v1.2 to v1.1 from AndiP.
List of added feature :
ARM CPU Topology : many patches has been included about optimizations/fixes.
Thanks & greetings
★ THANKS & GREETINGS ★ :
XDA board and community
Google
Samsung
CyanogenMod Team
gokhanmoral
Andreilux
wanam
spica1234
ZaneZam
Yank555
googy_anas
hardcore
AndiP
DONATIONS
★ DONATIONS ★ :
Many thanks to @fuxmen ! :good:
Many thanks to @colingpt ! :good:
Thank you to support my work !
Thanks bro tested ( Pardus HD Rom MG6 v18 )
downloading and nandorid backing up
does the setting Stweak compatible ?
qtwrk said:
does the setting Stweak compatible ?
Click to expand...
Click to collapse
Sorry, no STweaks support for the moment, but planning to do it. Need to learn how to add the compatibility. Stay tuned.
Envoyé depuis un téléphone qui pique les yeux.
Great work. The S3 community is getting richer with you aboard congratulations!
UPDATE
UPDATE :
16.08.2013 : v1.1 released.
ramdisk from XXEMF6.
Note : If you have a message before reboot in your recovery asking you to disable stock recovery flash, click yes to keep your custom recovery. I guess it's due to XXEMF6 ramdisk on which included a stock recovery flashing procedure with.
googy_anas said:
Great work. The S3 community is getting richer with you aboard congratulations!
Click to expand...
Click to collapse
Thank you mate, XDA is proud to have such great devs like you, and sharing to us kernels of your quality is such a chance that only a few people will understand this on this board :good:
My goal is to stay as stock as possible, so.. sorry but no competition with mine ! :laugh:
Cheers from France
UPDATE
UPDATE :
18.08.2013 : v1.2 released.
Linux kernel branch from 3.0.91 (kernel.org).
Enjoy :good:
This kernel is amazing
I flashed it.
Will be kernel compiled with Linaro Toolchain?
Assa551N said:
This kernel is amazing
I flashed it.
Will be kernel compiled with Linaro Toolchain?
Click to expand...
Click to collapse
Glad you like it
Yeah, I will compile it using linaro toolchain soon (already tried but had some errors when compiling resulting an abort. Need to learn a bit more flags configuration for compiling, hehe) :good:
Stay tuned!
Androidgx nice work.
For linaro 4.6 and above you will require this patch https://github.com/AndreiLux/Perseus-S3/commit/71f536fb9957c64cc6274221faa056694e010616
After this you're good to go with Linaro toolchain
Sent from my GT-I9300 using xda app-developers app
spica1234 said:
Androidgx nice work.
For linaro 4.6 and above you will require this patch https://github.com/AndreiLux/Perseus-S3/commit/71f536fb9957c64cc6274221faa056694e010616
After this you're good to go with Linaro toolchain
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thanks mate :good:
You write at the good moment, was currently trying to compile and learning how to compile right without errors using linaro gcc 4.7
I stay you tuned!
Androidgx,
This is the simple fsync which I wrote in 2012 which turns fsync on untill phone is booted and later after ,it"s booted it turns off fsync.
Plus the code has been optimized with branch prediction feature of cortexa-9 cpu by gcc accembly code and it does use cortex-a9 's preload engine (prefetch) to keep fsync state in L2 cache. Plus by branch prediction there is a less cpu overhead checking about whether fsync is on or off. It assumes fsync is off and with probable branch prediction it executes faster.
Below is the fsync as a patch which I wrote in mid 2012 for my older phone. You can use it .The basic fsync functional code is based on alrahi's code.
Simple Fsunc patch is here: http://db.tt/rdikFoKY
Sent from my GT-I9300 using xda app-developers app
AndroidGX said:
Thanks mate :good:
You write at the good moment, was currently trying to compile and learning how to compile right without errors using linaro gcc 4.7
I stay you tuned!
Click to expand...
Click to collapse
Linaro 4.8 is out. Try it as well
Sent from my GT-I9300 using xda app-developers app
spica1234 said:
Androidgx,
This is the simple fsync which I wrote in 2012 which turns fsync on untill phone is booted and later after ,it"s booted it turns off fsync.
Plus the code has been optimized with branch prediction feature of cortexa-9 cpu by gcc accembly code and it does use cortex-a9 's preload engine (prefetch) to keep fsync state in L2 cache. Plus by branch prediction there is a less cpu overhead checking about whether fsync is on or off. It assumes fsync is off and with probable branch prediction it executes faster.
Below is the fsync as a patch which I wrote in mid 2012 for my older phone. You can use it .The basic fsync functional code is based on alrahi's code.
Simple Fsunc patch is here: http://db.tt/rdikFoKY
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thank tou very much mate, will try it tomorrow :good:
Just tried compiling with your link "Toolchain fixes regarding smc architecture extensions", and managed to almost compile the kernel without "-Werror" flag removed.
Here is where it stops :
Code:
CC drivers/video/samsung/mdnie_tunning.o
CC drivers/video/samsung/s3cfb_s6e8aa0.o
CC drivers/video/samsung/smart_dimming.o
CC drivers/video/samsung/s5p_dsim_lowlevel.o
CC drivers/video/samsung/s5p-dsim.o
LD drivers/video/samsung/built-in.o
CC drivers/video/samsung_extdisp/s3cfb_extdsp_main.o
CC drivers/video/samsung_extdisp/s3cfb_extdsp_ops.o
In file included from drivers/video/samsung_extdisp/s3cfb_extdsp_ops.c:32:0:
drivers/video/samsung_extdisp/s3cfb_extdsp_ops.c: In function 's3cfb_extdsp_check_var':
drivers/video/samsung_extdisp/s3cfb_extdsp.h:154:43: error: inlining failed in call to always_inline 'get_extdsp_global': function body not available
drivers/video/samsung_extdisp/s3cfb_extdsp_ops.c:181:30: error: called from here
In file included from drivers/video/samsung_extdisp/s3cfb_extdsp_ops.c:32:0:
drivers/video/samsung_extdisp/s3cfb_extdsp_ops.c: In function 's3cfb_extdsp_set_par':
drivers/video/samsung_extdisp/s3cfb_extdsp.h:154:43: error: inlining failed in call to always_inline 'get_extdsp_global': function body not available
drivers/video/samsung_extdisp/s3cfb_extdsp_ops.c:197:30: error: called from here
In file included from drivers/video/samsung_extdisp/s3cfb_extdsp_ops.c:32:0:
drivers/video/samsung_extdisp/s3cfb_extdsp_ops.c: In function 's3cfb_extdsp_open':
drivers/video/samsung_extdisp/s3cfb_extdsp.h:154:43: error: inlining failed in call to always_inline 'get_extdsp_global': function body not available
drivers/video/samsung_extdisp/s3cfb_extdsp_ops.c:315:30: error: called from here
In file included from drivers/video/samsung_extdisp/s3cfb_extdsp_ops.c:32:0:
drivers/video/samsung_extdisp/s3cfb_extdsp_ops.c: In function 's3cfb_extdsp_release':
drivers/video/samsung_extdisp/s3cfb_extdsp.h:154:43: error: inlining failed in call to always_inline 'get_extdsp_global': function body not available
drivers/video/samsung_extdisp/s3cfb_extdsp_ops.c:345:30: error: called from here
In file included from drivers/video/samsung_extdisp/s3cfb_extdsp_ops.c:32:0:
drivers/video/samsung_extdisp/s3cfb_extdsp_ops.c: In function 's3cfb_extdsp_blank':
drivers/video/samsung_extdisp/s3cfb_extdsp.h:154:43: error: inlining failed in call to always_inline 'get_extdsp_global': function body not available
drivers/video/samsung_extdisp/s3cfb_extdsp_ops.c:387:30: error: called from here
In file included from drivers/video/samsung_extdisp/s3cfb_extdsp_ops.c:32:0:
drivers/video/samsung_extdisp/s3cfb_extdsp_ops.c: In function 's3cfb_extdsp_pan_display':
drivers/video/samsung_extdisp/s3cfb_extdsp.h:154:43: error: inlining failed in call to always_inline 'get_extdsp_global': function body not available
drivers/video/samsung_extdisp/s3cfb_extdsp_ops.c:468:30: error: called from here
In file included from drivers/video/samsung_extdisp/s3cfb_extdsp_ops.c:32:0:
drivers/video/samsung_extdisp/s3cfb_extdsp_ops.c: In function 's3cfb_extdsp_ioctl':
drivers/video/samsung_extdisp/s3cfb_extdsp.h:154:43: error: inlining failed in call to always_inline 'get_extdsp_global': function body not available
drivers/video/samsung_extdisp/s3cfb_extdsp_ops.c:491:30: error: called from here
make[3]: *** [drivers/video/samsung_extdisp/s3cfb_extdsp_ops.o] Erreur 1
make[2]: *** [drivers/video/samsung_extdisp] Erreur 2
make[1]: *** [drivers/video] Erreur 2
make: *** [drivers] Erreur 2
[B][email protected] ~/projects/kernels/LiteGX $ [/B]
Any idea ?
Maybe another flag need to be removed ?
Androidgx,
Seems like this will solve it.
Open file drivers/video/samsung_extdisp/s3cfb_extdsp.h
Now goto line 154 and remove the word "inline" before struct declaration or add "static" before inline. Save file and try to compile back
Sent from my GT-I9300 using xda app-developers app
spica1234 said:
Androidgx,
Seems like this will solve it.
Open file drivers/video/samsung_extdisp/s3cfb_extdsp.h
Now goto line 154 and remove the word "inline" before struct declaration or add "static" before inline. Save file and try to compile back
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thank you mate it worked almost perfectly after. Just faced the same problem as THIS guy before finishing compiling, followed exactly what he said (replacing the Makefile completely, and it worked, finally :laugh. I just hope it was the right way to do.
Currenty testing my fresh new kernel with linaro 4.7.4 gcc toolchain thanks to you.
Btw, about your fsync tips patch you send me, I have very poor knowledge, is this something really noticable in term of difference as stock ? I mean a good improvement over ?
Many thanks for your explanations :good:
does this kernel supports exfat sd cards ???
Related
LuPuS Kernel Stock
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Well seen as WIFI is FIXED I may as well clean this up a bit and make it look better.
I do not have a PRO so you guys can help tell me what else works/doesnt work.
Thanks to Dympy for testing and motivation without him and also Dexxmor everyone wouldn't have
this kernel and me of course
Disclaimer
Code:
[COLOR="DarkOrchid"]#include[/COLOR] [COLOR="Magenta"]std.h[/COLOR]
[COLOR="Blue"]/*
* Your warranty is now void.. LOL I guess you knew it already.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, you getting dumped or you getting fired because your phone*
* bootloops and alarm does not go off. Please do some research if you have any *
* concerns about features included in my kernel before using it! YOU and only*
* YOU are choosing to make these modifications.
*/
[COLOR="Magenta"]#ifdef[/COLOR]
You have a [COLOR="DarkGreen"]question[/COLOR] post it in the [COLOR="DarkRed"]thread[/COLOR],
Instead of [COLOR="DarkGreen"]Pm'ing me[/COLOR], as other users may
experience your [COLOR="DarkRed"]problems[/COLOR]
[COLOR="Magenta"]#endif[/COLOR][/COLOR]
Whats inside this Kernel List of governors / Io-Schedulers ect....
Added Io-schedulers --
- Noop
- Anticipatory
- Deadline
- CFQ
- BFQ
- SIO
- ZEN
Added Governors --
- lagfree
- brazillianwax
- smoothass
- scary
- savagedzen
- smartass
- smartassv2
- smartassH3
- interactivex
- minmax
- powersave
- performance
- conservative
- ondemand
- interactive
- userspace
+
Lulzactive - Thanks to Tegrak
Based on Interactive and Smartass. When workload is greater than or equal to 60%, the governor scales up
CPU to next higher step. When workload is less than 60%, governor scales down CPU to next lower step.
When screen is off, frequency is locked to global scaling minimum frequency
Virtuous
Virtuous is a modded smartassV2 which gives even more battery time then smartassV2
Intellidemand - Thanks to faux123
This is an intelligent ondemand that enters browsing mode to limit max frequency when GPU is idling,
and (exits browsing mode) behaves like ondemand when GPU is busy; to deliver performance for gaming and such.
Intellidemand does not jump to highest frequency when screen is off.
Lazy - Thanks to Ezekeel
The Idea here is to eliminate any instabilities caused by fast frequency switching by ondemand.
Lazy governor polls more often than ondemand, but changes frequency only after completing min_time_state
on a step overriding sampling interval.
Lazy also has a screenoff_maxfreq parameter which when enabled will cause the governor to always
select the maximum frequency while the screen is off.
-Ondemandx:
Basically an ondemand with suspend/wake profiles. This governor is supposed to be a battery friendly ondemand. When screen is off, max frequency is capped at 500 mhz. Even though ondemand is the default governor in many kernel and is considered safe/stable, the support for ondemand/ondemandX depends on CPU capability to do fast frequency switching which are very low latency frequency transitions. I have read somewhere that the performance of ondemand/ondemandx were significantly varying for different i/o schedulers. This is not true for most of the other governors. I personally feel ondemand/ondemandx goes best with SIO I/O scheduler.
-Lionheart:
Is a conservative-based governor. The tunables (such as the thresholds and sampling rate) were changed so the governor behaves more like the performance one, at the cost of battery as the scaling is very aggressive.
To 'experience' Lionheart using conservative, try these tweaks:
sampling_rate:10000 or 20000 or 50000, whichever you feel is safer. (transition latency of the CPU is something below 10ms/10,000uS hence using 10,000 might not be safe).
up_threshold:60
down_threshold:30
freq_step:5
Lionheart goes well with deadline i/o scheduler. When it comes to smoothness (not considering battery drain), a tuned conservative delivers more as compared to a tuned ondemand.
BadAss Governor:
Badass removes all of this "fast peaking" to the max frequency. Badass will also take the gpu load into consideration. If the gpu is moderately busy it will bypass the above check and clock the cpu with 1024Mhz. If the gpu is crushed under load, badass will lift the restrictions to the cpu.
Superbad -
A "superbad" super smooth rendition of a highly optimized "smartass" governor!
Darkside -
A "slightly more agressive smart" optimized governor!
What else-----
-SLQB - (SLAB allocator with Queue)-(both)
This memory allocator is designed for small number of CPUs system (such as desktop or smart phone devices). This allocator is design to be simple and it is optimized for using order-0 pages as much as possible (order-0 pages are the simplest therefore quickest type of memory in a Linux system to allocate).
Show your support for the kernel and my work by putting this in your signature, its only a quick one I done up with my limited time
Code:
http://i.imgur.com/xtWNL.png
A big thanks to -
gu5t3r
paxChristos
Sony - sources
tempest918 - For the New Logo
Dymy - Testing
Dexxmor - Testing
DooMLoRD - for patches and all the work he has done for Xpeeria's
xeozus
NobodyAtAll
Faux123
Erasmus
Leedroid
FXP Team
Jerpelea
Phil3759
CTCaer
Anyone missing please PM me
Downloads in post 2
Kernel source --- -branch master
https://github.com/garwedgess/LuPuS-STOCK-ICS-Xperia2011
CWM source -- https://github.com/garwedgess/android_bootable_recovery -b lupus-cwm
Changelog -
Code:
[B]Previous Releases[/B]
[hide]
- Added Cleancache
- Supports ext 2,3 and 4
- Updated zRam
- Lzo compression/decompression speed has doubled on average.
- Init.d support
- Fudgeswap
- And much more :D
[/LIST]
[U][B][COLOR="Blue"]What's been added in v5[/COLOR][/B][/U]
[LIST] ~2 Way call recording
~ Ext4 support
~ More battery friendly (so far so good)
~ Increased WiFi signal strength
~ Free’d Ram
~ GPU Overclock
~ Made kernel smoother
~ Might of left one or 2things out here
[/LIST]
[B][U][COLOR="Blue"][B][U]Whats new in v6[/U][/B][/COLOR][/U][/B]
[LIST]~ Completely fixed boot problem[COLOR="blue"][COLOR="Red"] (boot is set to 806MHz, don't complain as you will OC anyway :p)[/COLOR][/COLOR]
~ Quicker boot time
~ Fixed battery issues :fingers-crossed:
~ Added governor-- [COLOR="SeaGreen"]Intellidemand2[/COLOR]
~ Removed GPU O/C ( causes lag :( )
~ Wifi Signal and lock on much quicker/better
~ Alot of clean-ups & small fixes
~ Touchscreen fix
~ kgsl: Use highest performance level on wake-up from sleep
[/LIST]
[B][U]v9 changes[/U][/B]
[LIST]
- Improved Battery Life
- Thumbee support
- ARM7 optimizations
- Brought OC back down to 1.6 max (no need for it above 1.6 unless u want to kill your device)
- Kernel sources completely reworked started from scratch o Sony xx.587 sources
- Tiny RCU
- Upddatedd patched and fixed LZO
- lowered vfs cache pressure
- Increased Wifi- Range and added support for channel 14
- Iyokan Touchscreen fix - Thanks @ Nick
- 0 % Battery patch - Thanks @ Bazoocaze
- Better memory copy
- Better memory move
- LMK Optimizations (LowMemoryKiller)
- VDD support (voltage conrol)
- Linaro Optimzations
- Compaction added
- KSM
- CIFS (improved support)
- NTFS
- USB OTG
- Updated to newest SIO Io-Scheduler
- Google Snappy Compress & Decompress
- Added Vibrate To Recovery (Notification to enter CWM)
[B][U]v10[/U][/B]
- Built with Linaro 4.7.3 (02-01-13)
- Reworked Ramdisk, uses new method
- Auto Root updated to SuperSU, only roots device if Superuser.apk or SuperSU.apk dont already exist
- New LuPuS menu - check in post #1 on how to use it
- Build in wifi modules ( if wifi modules don't work on first install reboot)
- Built in CIFS & USB OTG (from lupus menu)
- Built in zRam, you can also change zRam size (from LuPuS menu)
- TWRP and latest CWM Recovery {change default in LuPuS Menu)
- Supports Gb and ICS (GB has wifi broken ATM)
- Tweaks menu from LuPuS menu script
- Free'd 11mb RAM
- cgroup scheduling
- binder changes from 2.6.32.60
- binder: Fix use of uninitialized variable.
- net sched: fix some kernel memory leaks
- net/ipv4: Eliminate kstrdup memory leak
- ipv4: force_igmp_version ignored when a IGMPv3 query received
- pids: Fix a race in pid generation that causes pids to be reused immediately
- smart toggle overclock upto 2ghz
- changed RD compression to LZMA
- enable group scheduling
- removed some debugging
- cleaned up config
- USB tether
- enable ipsec tunnel support in kernel
- SQLITE3 DB vacumming
- Further compressed ramdisk
- disabled cuse, enabled md4 + nls_utf8 as modules
**Probably alot more but this is all I can remember for now**
[B]-v11[/B]
- [COLOR="Red"]Updated kernel to 2.6.32.60[/COLOR]
- CWM = volume down
- TWRP = volume up
- Complete clean up and new improved LuPuS Menu
- Free's more RAM 360mb RAM in total now
- Fixed AROMA
- Backport Binder from CAF 3.4.0
- Triple Buffer
- Frandom
- Tweaked deadline
- Tweaked SmartassV2
- New governor SmartassH3
- New IO-Scheduler ZEN
- Patch so entropy no longer depletes
- Zcache
- ARM optimizations
- Genlock backported from CAF
- Replaced old compaction with newer/better version
- Backported logger from CAF and free'd RAM from logger
- Updated improved LMK
- Removed fudgeswap
- Updated crc32 lib from 3.3 kernel
- New net scheduler Stochastic Fair Blue (SFB)
- Optimized Tiny RCU
- CFS tweaks
- Quick keyboard reset (hold HOME + POWER)
- Timed_gpio backported from CAF
- Snapdragon optiizations
- Improved boot time
- Improved wifi to load at first boot
- Removed Autoroot feature
[URL="https://github.com/garwedgess/LuPuS-STOCK-ICS-Xperia2011/commits/2.6.32.x"]** Plus more see here for all patches and credits**
Also Thanks at gu5t3r and [NUT][/URL]
[B]v12[/B]
- Fixed HDMI
- Fixed Video playback/recording
- Reverted back to linux kernel 2.6.32.9
- Removed triple buffer (caused some lag)
- Fixed problem with root @ gu5t3r
- LuPuS Script now runs properly from Terminal Emulator @ gu5t3r
- Free RAM = 355mb and is stable
- Added fool-proof to ramdisk -- if non-supported Android version is found (not ICS or GB) Kernel will boot into CWM
- Reduced size of kernel
[B]v13[/B]
- Fixed CPU Governor and Frequencies not sticking at boot -- thanks [user=4665716]@gu5t3r[/user]
---- Custom CWM
- Clean-up of menu
- Added own wipe options menu -- with extra options
- Aroma File Manager from CWM --- Must have aroma ([COLOR=Red]aromafm.zip) placed on root of sdcard[/COLOR])
- Multi zip installer
- Reboot options - Power off re-added under this menu
- Pointless but people keep asking me for it so re-added wipe battery stats also.
- LuPuS themed...
[B]v14[/B]
- Fixed Camera Key
- Kernel works on CM9
- Removed persistent RAM
- Remove other errors from dmesg
- Improved wifi loading
- Disabled Key Reset (can be enbled in LuPuS Menu)
---- CWM updated to 6.0.3.2
- Fixed Advanced restore
- Fixed busybox symlinks generation (aka) fixed CWM backup not working
- Fixed install from sideload being mixed up with toggle signature
- Remove confirmation from install from sideload as it can be cancelled at anytime.
---- Complete Ramdisk Clean up & Improvment
- Reworked booting
- Supports m2sd and other ap2sd scripts
- Force booting -After 2 Vibrations Hold Home for ICS
-Hold Home and press VolDown for CM9
-Hold Home and press VolUp for GB
- Fixed Reboot To Recovery (It reboots to last one used IF you don't have scripts that wipe /cache on boot)
- Reworked Kernel logs, they are located at /cache/recovery/ and /data/local/tmp/
- Improved init.d
- lupus menu clean up
- Added Vendor fix from Hallon & Anzu
- option to mount / unmount
- Backup / Restore /system/vendor
- Boot.d - If phone is taking a long time to start move suspicious init.d scripts to /system/etc/boot.d
They will be run in background and won't affect boot time.
[B]v15[/B]
- Added Ultra-KSM
- Tuned Governors
* superbad
* lionheart
* virtuous
* darkside
* conservative
* smartassH3
- Really use google snappy zRam (improves zRam)
- Fix nasty sigreturn bug
- Fix compiler warnings
- Do uninteruptible sleep
- Other various fixes
- Removed GB & CM9 support
- Other various ramdisk improvments
- Updated TWRP - Mounting Mass Storage should be fixed
- Updated LuPuS CWM to latest Official CWM changes
* Fixed advanced restore
* Removed Reboot Options
* Brough Reboot System Now back to Main Menu
* Brought Power Off back to Main Menu
* After install of zip dont return to main menu
* Minor UI changes
- Fixed Mounting Vendor (please test can be set via lupus menu)
- patch can also be forced at boot by
hold home + hold voldown = force ics + vendor patch
hold home + tap vol down = force ics
key -- Thanks [user=4665716]@gu5t3r[/user][/hide]
[B]v16[/B]
- Fix some lag in gaming
- Set default swappiness to 20
- Removed fsync
- Removed Cleancache
- Removed zCache
- Removed WasActive page flag
- Removed Zen IO-Scheduler
- Fixed issue with some devices booting into CWM
- Fixed CWM install options order
- Fixed TWRP adb and mounting USB storage
- Fixed PATH for LuPuS Menu
- Added UKSM options to LuPuS-Menu
[/LIST]
Downloads
If you like my work please consider buying me a beer or something else
by clicking the DONATE ME button, of course it isn't needed but greatly appreciated and keeps me motivated.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CWM = VOLUME DOWN
TWRP = VOLUME UP
If you need root for STOCK ROM
Code:
[COLOR="Purple"]Root[/COLOR] : ( Flashable via recovery )
* SuperSU : [URL="http://download.chainfire.eu/204/SuperSU/"][COLOR="Green"][U]Download[/U][/COLOR][/URL]
* Superuser : [URL="http://androidsu.com/superuser/"][COLOR="Green"][U]Download[/U][/COLOR][/URL]
LuPuS_iyokan_Stock-iCsv16-full.img
md5 = 65693fa968dc00a5c5cf42705e0b9244
Check your MD5 and make sure it matches with the above before posting that it doesn't work for you
Wifi modules are built in
Mirrors - and all other releases
http://www.goo.im/devs/wedgess
==========================================================================================================
Folder for all older and current LuPuS-PRO kernels & modules:
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
LuPuS-Kernel-Folder
Wfi-Modules-PRO
==========================================================================================================
LuPuS Menu
To Run LuPuS Menu use either ScriptManager get it HERE on google playstore
Or
Use Terminal Emulator get it HERE on google playstore.
Code:
su
lupus
* information is in lupus menu
1/ CIFS Menu *
Enable
Disable
2/ zRam Menu *
Enable
Disable
Set zRam size ( default is 60)
3/ Frandom Menu *
Enable
Disable
4/ USB OTG *
Enable
Disable
5/ Clean and Remove tweaks
Remove init.d's
6/ Tweak Menu
Note all tweaks are preset from here and option to set as init.d's
Clean all temp files
SQLITE optimizations
LMK Optimizations
Network optimizations
Defend against ARP spoofing
Remove android logger
SDcard speed tweak
Flag blocks as non-rotational
7/ Performance Menu
Note all options are se by user input from here and option to set as init.d's
Set CPU frequencies
Set Governor
Set IO-Scheduler
Voltage Control
VM tweaks (explained below)
VM Tweaks
dirty ratio and dirty background ratio 1 & 2
This controls how often the kernel writes data to "disk" (in our case the internal microSD system card, not the removable microSD card). When your apps write data to disk, Linux actually doesn't write the data out to the disk right away, it actually writes the stuff to system memory and the kernel handles when and how the data is actually going to be flushed to the disk. These values represent a percentage, the higher the percentage, the longer it waits to flush, the lower the percentage, the more often flushes will occur. Now remember, we are dealing with solid state storage, not the traditional disk platter and spindle. So we are actually able to delay flushes a little longer with solid state versus a traditional hard drive disk.
dirty_expire_centisecs
How old "dirty" data should be before the kernel considers it old enough to be written to disk. It is expressed in 100ths of a second.
dirty_writeback_centisecs
This is the interval of when the writeback daemons periodically wake up and write "old" data out to disk. It is expressed in 100ths of a second.
min free kbytes
This is used to force the Linux VM to keep a minimum number of kilobytes free. The VM uses this number to compute a pages_min value for each lowmem zone in the system. Each lowmem zone gets a number of reserved free pages based proportionally on its size. Default is 2048kb.
overcommit_memory
This controls overcommit of system memory, possibly allowing processes to allocate (but not use) more memory than is actually available.
0 - Heuristic overcommit handling. Obvious overcommits of address space are refused. Used for a typical system. It ensures a seriously wild allocation fails while allowing overcommit to reduce swap usage. root is allowed to allocate slighly more memory in this mode. This is the default.
1 - Always overcommit. Appropriate for some scientific applications.
2 - Don't overcommit. The total address space commit for the system is not permitted to exceed swap plus a configurable percentage (default is 50) of physical RAM. Depending on the percentage you use, in most situations this means a process will not be killed while attempting to use already-allocated memory but will receive errors on memory allocation as appropriate.
Swappiness
A property for the Linux kernel that changes the balance between swapping out runtime memory, as opposed to dropping pages from the system page cache. Swappiness can be set to values between 0 and 100 inclusive. A low value means the kernel will try to avoid swapping as much as possible where a higher value instead will make the kernel aggressively try to use swap space.
VFS Cache Pressure
File system cache (dentry/inode) is really more important than the block cache above in dirty ratio and dirty background ratio, so we really want the kernel to use up much more of the RAM for file system cache, this will increas the performance of the system without sacrificing performance at the application level. The default value is 100, as a percentage, and what you want to do is lower the value to tell the kernel to favor the file system cache and not drop them aggressively.
8/ Enable / Disable Quick Key Reset
- Reboot device quickly by Holding HOME and POWER Key (Disabled by default)
- Enable
- Disable
9/ Vendor Options
- Fix for Anzu and Hallon Vendor problem
- Mount
- Unmount
- Backup
- Restore
If you like my work please consider buying me a beer or something else
by clicking the DONATE ME button, of course it isn't needed but greatly appreciated and keeps me motivated.
Great, will test it
EDIT: Bootet, i testet the Kernel on stockrom and, when it comes out, on ndet JJ Hybrid 12
First Bug: No Wlan, but i think it is the failure of the wifi modules for the Arkknight kernel.
what recovery does this use?
cLeAv0 said:
what recovery does this use?
Click to expand...
Click to collapse
Its 5.0.27 going to change to dooms recovery and ill add aroma file manager with volume down button and back as recovery , depending on how many people download/thanks ect
Sent from my Xperia Play
wedgess said:
Its 5.0.27 going to change to dooms recovery with my modded aroma file manager, depending on how many people download/thanks sect
Sent from my Xperia Play
Click to expand...
Click to collapse
I see. I hope you update this frequently cause i'll gonna be using it What's the busybox version included in the recovery?
Sorry for the noob question but will it work on arc s??
And are the modules included in the kernel or are they flashed separatly??
Sent from my LT18i using xda premium
Not for Arc / Arc S only Pro
CONdemmedNORmal said:
Sorry for the noob question but will it work on arc s??
And are the modules included in the kernel or are they flashed separatly??
Sent from my LT18i using xda premium
Click to expand...
Click to collapse
No.. It is for Pro.. It means it is for Xperia Pro only.. None other than that..
Sent from my MK16i using Tapatalk 2
PLEASE not everybody has thanked him do that i only tested he did great work we didnt had this powerfull kernel if he took the time to port it!:good::good:
xperiap said:
PLEASE not everybody has thanked him do that i only tested he did great work we didnt had this powerfull kernel if he took the time to port it!:good::good:
Click to expand...
Click to collapse
+1 to that I don't have a Xperia pro but Xperiap brought it to my attention that you guys got barely any kernels, so I'm trying to help u all out, not like I'm asking for donations, only asking u all to click a thanks button 36 downloads and 5thanks???????
Sent from my Xperia Play
I Have clicked under every Post of you C'mon guys clicked thanks, it wont be hurt you :good:
Front Camera work anybody check? tell me plss
Frontcamera works
flsmidth said:
No.. It is for Pro.. It means it is for Xperia Pro only.. None other than that..
Sent from my MK16i using Tapatalk 2
Click to expand...
Click to collapse
So how come its in the arc forum on xda app
Sent from my LT18i using xda premium
Pro and Arc have the same forum, because the Pro has no own forum.
CONdemmedNORmal said:
So how come its in the arc forum on xda app
Sent from my LT18i using xda premium
Click to expand...
Click to collapse
Besides the ARC has plenty of kernel does it not.if ARC users want this.then thank this post and I'll make1
Sent from my Xperia Play
hi, thanks for this i also tested your other kernel
thank you so much for your work.
i will give it a go.
thanks again!
Hi, first of all thanks for the kernel and all your effort :good:, downloading the kernel now., will let you if I could find any bugs..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WARNING :
THIS KERNEL IS ONLY FOR THE GT-I9300 AND ANDROID 4.3 (SAMSUNG) !
This is a pure LITE, STOCK WAY & STABLE kernel with MINIMAL features.
Many of you knows my Android 4.1.2 LiteGX kernel, here is the 4.3 version !
My goal is to offer a slight modification of our Samsung stock kernel's, with few features, aiming a better battery life than stock without affecting any drain.
This is a kernel "plug-and-play" or I would say more "flash-and-play". No need for tools or apps to configure the kernel. This is the way I wanted it. A bit like speedmod kernel did.
Unfortunately, I'am not a developer but just a basic person with some android/linux knowledge already.
My dream was one day to create my own kernel, and thanks to great developers that answered my many questions, this dream has been possible. I'am very happy and proud to share my first ever kernel to everybody here.
It must be only flashed over an official Samsung ROM and not AOSP/AOKP !
Feel free to include my kernel to your ROMs / Threads but please don't forget to inform/ask first via PM and credit me in your original thread.
★ FEATURES (up-to-date) ★ :Base :
Directly based on "GT-I9300_JB_Opensource_Update13" (XXUGMK6) JellyBean Android 4.3 source from Samsung (for clean work and stability).
Compiled with stock android ARM EABI (v4.4.3) toolchain.
Ramdisk from XXUGNA7.
Main :
ZZMoove (v0.7d) governor (added). [PROFILES INCLUDED! grab them into SCRIPTS section].
smartassV2 governor (added).
Enabled all other stock governors ("adaptive", "conservative", "interactive").
ROW (v4) optimized and as only I/O scheduler.
Wolfson Boeffla Sound (v1.6.5 drivers) compatibility.
hardcore mDNIe tweaks (for better colors + sharpness fix for better readability).
Touch-to-Wake (v1.1a) (but disabled by default). [PROFILES INCLUDED! grab them into SCRIPTS section].
USB charging increased (to 900mA instead of 475 by default).
Allow manual brightness to 300 candela.
init.d support.
BusyBox v1.22.1 included in case of need (located in /sbin).
CRT-off effect friendly (early_suspend set to 100ms).
Native ExFAT support.
Native xbox controller support.
TriangleAway support.
Various tweaks :
Optimized ARM CPU topology.
"GENTLE_FAIR_SLEEPERS" disabled.
"ARCH_POWER" enabled.
"SCHED_MC" added. [PROFILES INCLUDED! grab them into SCRIPTS section].
ROW scheduler & blk-core tweaks.
"Westwood", "HTCP" and "BIC" TCP congestion control modules added. [PROFILES INCLUDED! grab them into SCRIPTS section].
Reduced WiFi wakelock.
Disabled multicast on suspend.
Proportional rate reduction for TCP.
Higher random entropy.
Doubled min-max ReadAhead.
CRC disabled.
USB OTG enabled.
"Samsung Rooting Restriction Feature" removed.
Fully compressed libs ".ko" modules.
Automatic dalvik-cache wiping in kernel flashing procedure.
Logging and debugging tweaks :
Android logger disabled.
Various debugging for certain modules.
Disabled kernel debugging : Samsung / sec_log / last_kmsg / touchscreen / modem / max77686 / sec_watchdog.
Features that will NEVER be included in this kernel :
Overclock / Underclock / Undervolt.
auto-root
LED control.
Charge control.
Master sequence (screen calibrated).
ABB (Adaptive Body Bias).
Any upgrade of Linux kernel 3.0.XX.
STweaks compatibility.
Dual-Boot Sammy/AOSP.
CyanogenMod compatibility.
MIUI compatibility.
etc.
★ PREREQUISITE ★ :
Any odexed or deodexed international I9300 Samsung 4.3 Jelly Bean ROM.
A custom recovery (CWM recommanded) to flash the kernel.
Be sure to remove any of your init.d scripts which can meet conflicts with ones I provide.
★ FREQUENTLY ASKED QUESTIONS ★ :
Do I need to flash any cleaner script before flashing this kernel ? :
> If your previous custom kernel dev provided a cleaner script, then you can flash it before flashing mine.
How can I customize this kernel ? :
> Mainly with ZZMoove/zRam profiles (grab them below) and with TricksterMOD / SetCPU apps.
What is zRam and his pros/cons ? :
> Check THIS interesting answer from @Yank555.
Which zRam script should I choose ? :
> Check THIS interesting answer still from @Yank555.
How to check if flashed zRam script is really currently in use ? :
> You can check it directly by using "cat /proc/swaps" or "free" shell commands via a terminal.
What does the LiteGX cleaner script ? :
> It deletes all ZZMoove/zRam profiles that you flashed after this kernel. So you can go in another kernel safely. It don't removes anything else since this kernel is pure stock based and don't add any files/folders that need to be deleted after. This cleaner script will be only efficient in this situation only, it does not clean anything before coming from another kernel to mine.
Do I need to wipe cache + dalvik each time I flash a new kernel version ? :
> Nope. Moreover dalvik cache is already wiped automatically during flashing procedure.
Do I really need to flash any profiles/scripts ? :
> Definitely not. It's user choice to do it.
Do I need to re-flash ZZMoove ZIP profiles each time I flash a new kernel version ? :
> Nope. It just install an init.d script, so it will be permanent until you delete files from your init.d folder or flash "Cleaner" version which will do this for you.
Do I need to remove old ZZMoove profiles manually before flashing a new profile ZIP ? :
> Nope. Each ZIP's include an automatic removal of previously used profile.
My TricksterMOD settings are losed after rebooting ! :
> I won't learn how to use this app but to make short, once you set any value (or modify anything), click the "V" icon at top right to apply new value, then press settings icon of the app (still on top right) and tick kernel parameters option to apply settings at boot.
Android OS usage is very often at top of my battery stats ! :
> Check THIS interesting thread. Moreover it looks android 4.3 source known related problem, hopefully will be solved in another next source.
My device is getting hot at load (games) or high usage ! :
> Check THIS interesting answer from @ZaneZam.
I lost my WiFi connexion ! :
> Be sure to flash an efsV2 modem (XXUGMK6+ minimum).
★ SOURCES ★ :
Github >> LiteGX.
Need supports ? all kind of questions must be posted on this thread directly. Be sure to read at least completely this first post before asking any question.
If you enjoy this kernel, don't forget to rate this thread
stars, and clicking the 'thanks' button (right below) is always appreciated to keep this thread maintained
LIKE MY WORK ?
OFFER ME A
!
Changelog
★ All ZZMoove / zRam / Cleaner scripts can be found HERE ★★ All oldest releases can be found HERE ★
★ CHANGELOG ★ :
21.02.2014 : v5.1.0 released:
Revert back to "GT-I9300_JB_Opensource_Update13" source from Samsung (ExFAT compatibility is back).
Revert: "Brings back stock defconfig debugging" (will finally wait for next source to do that again).
Revert: "Disabled USB OTG" (not causing slow USB/AC charges).
litegx_defconfig : ANDROID_LOGGER disabled.
Force ExFAT loading as internal module.
Properly removed LZ4 compression implementation + zRam various lines in defconfig (for clean work).
15.02.2014 : v5.0.0 released:
Now based from "GT-I9300_SEA_JB_Opensource_Update2" source from Samsung.
ramdisk upgraded to XXUGNA7.
Brings back stock defconfig debugging (to be once again more close from stock source as possible).
Disabled USB OTG (was causing slow USB+AC charging).
Disabled zRam and swap support from stock new source defconfig (for best battery life experience).
Fully removed my zRam implementation + LZ4 compression.
Removed "zRam profiles" from scripts folder.
09.02.2014 : v4.8.1 released.
Added an automatic device model and android version checking into flashing procedure to avoid some (beginners) people trying to flash the kernel in any another device and/or android version.
04.02.2014 : v4.8.0 released.
Removed forced speedmod pegasusq tweaks from ramdisk (back to stock values) to prevent earphone crackles and audio stuttering when listening music (values looks a bit hard at idle resulting this problem). In case you still got the issue with this governor, just switch to another one.
Added "pegasusq profiles" into scripts folder :
- pegasusq_speedmod.zip
Updated "LiteGX-KERNEL_full_cleaner.zip" to match new pegasusq profiles flashable ZIP (please remove old one).
01.02.2014 : v4.7.0 released.
ramdisk upgraded to XXUGNA5.
BusyBox (compiled by myself) updated to v1.22.1 (located in /sbin) with stock applets.
ramdisk : removed a lot of external applets which are now directly included in my BusyBox.
18.01.2014 : v4.6.0 released.
Added "smartassV2" governor (battery is MUCH increased with it at the cost of some lags).
Makefile: Back to stock Update13 source optimizations (I thought it was done already but I forgot it).
16.01.2014 : v4.5.0 released.
Reverted "ignore charger unstable power" previous patch (it was causing USB tethering not working anymore).
Boeffla Sound Engine updated to 1.6.5 (allows speaker volumes down to 20).
mmc/core: CRC disabled (performance should be slightly increased).
Enable USB OTG.
13.01.2014 : v4.4.0 released.
"pegasusq" governor with speedmod kernel tweaks (thanks hardcore).
ramdisk: turn OFF debugging for certain modules (thanks hardcore).
11.01.2014 : v4.3.0 released.
TriangleAway support (back).
Unstable power charging ignored (now charging much faster than before)
'pegasusq' governor is now set as default (kernel is much smoother than ever (+ no more random lags ingame/UI) with it).
Enabled all other stock governors ('adaptive', 'conservative', 'interactive') for people who wants to try them out.
Decided to re-include some of my old patches (do not ask me why ^^) :
- Reduced WiFi wakelock.
- Disabled multicast on suspend.
- Proportional rate reduction for TCP.
- Higher random entropy.
- Doubled min-max ReadAhead.
02.01.2014 : v4.2.3 released.
Disabled "CONFIG_SCHED_AUTOGROUP" (useless in Android).
02.01.2014 : v4.2.2 released.
xbox controller now loaded as internal module (instead of external).
02.01.2014 : v4.2.1 released.
Fixed ExFAT support.
01.01.2014 : v4.2.0 released.
Added hardcore mDNIe sharpness & colors tweaks. Colors profiles remains intact, so they still can be activated in display section (which was not the case in LiteGX for android 4.1.2).
Clic below to see older changelog ..
01.01.2014 : v4.1.1 released.
Removed (temporarily) Triangle Away support (incompatible with Android 4.3 yet), to avoid force close messages.
30.12.2013 : v4.1.0 released.
ramdisk upgraded to XXUGML2 (Android 4.3).
29.12.2013 : v4.0.0 released.
Now based from official Update13 XXUGMK6 source from Samsung.
Now compiled with stock Android ARM EABI 4.4.3.
Reverted: "Enabled persistent TRIM support for all partitions" tweak (since samsung already included it in Update13 now).
Touch-to-Wake is now disabled by default (for battery purpose).
Added some "Touch-to-Wake profiles" into scripts folder :
- Touch-to-Wake_disabled(stock).zip
- Touch-to-Wake_enabled_3s.zip
- Touch-to-Wake_enabled_5s.zip
- Touch-to-Wake_enabled_8s.zip
- Touch-to-Wake_enabled_10s.zip
- Touch-to-Wake_enabled_15s.zip
Updated "LiteGX-KERNEL_full_cleaner.zip" to match new Touch-to-Wake flashable ZIP's (please remove old one).
15.12.2013 : v3.6.0 released.
Upgraded to XXUGMK6 Android 4.3 ramdisk (from official LEAK this time). In case your old modem is not working anymore, update it to THIS one.
SCHED_MC disabled back by default (0) to avoid some people facing some lags due to agressive value (moreover, I prefer to trust ZZMoove stock behaviour).
Added some "SCHED_MC profiles" into scripts folder :
- "SCHED_MC_power_savings_0(stock).zip"
- "SCHED_MC_power_savings_1.zip"
- "SCHED_MC_power_savings_2.zip"
It will be useful for those who wants to change it without the need to use TricksterMOD (etc) anymore.
Updated "LiteGX-KERNEL_full_cleaner.zip" to match new SCHED_MC flashable ZIP's (please remove old one).
12.12.2013 : v3.5.0 released.
Upgraded to XXUGMK6 Android 4.3 ramdisk.
05.12.2013 : Flashable ZIP's adding.
Added some "TCP congestion profiles" into scripts folder :
- "TCP-congestion_bic.zip"
- "TCP-congestion_westwood.zip"
- "TCP-congestion_htcp.zip"
- "TCP-congestion_reno.zip"
- "TCP-congestion_cubic(stock).zip"
It will be useful for those who wants to change it without the need to use TricksterMOD (etc) anymore.
Updated "LiteGX-KERNEL_full_cleaner.zip" to match new TCP flashable ZIP's (please remove old one).
02.12.2013 : v3.4.0 released.
zRam is disabled as default again (this time for ever), for battery purpose at the cost of a bit less multitasking (if you want it again : just flash any zRam script).
"GENTLE_FAIR_SLEEPERS" disabled (back), should improve UI responsiveness.
Updated "zRam_disabled.zip" to match new zRam disabling as default (please delete old one).
28.11.2013 : v3.3.0 released.
zRam is now initialized by default once flashing the kernel with 600MB disksize and 100% swapiness. If you feel some lags, try different values with scripts (hope it will help people finding this kernel more smooth than default without it).
All zRam scripts has been reworked and updated (please delete olders and download latest ones). If you want to turn off zRam, this time you'll have to flash "zRam_disabled.zip" file.
zRam initialization is now using a custom busybox binary directly integrated in the kernel, it will avoid some people not having their zRam properly working due to some roms busybox which cannot execute 'swapon' shell command and with priorities.
- A little reminder : to check if your zRam is working, no more need to install Turbo zRam app, on a Terminal, write : "free" (if you see swap values, then zRam is working) or "cat /proc/swaps" (which will give you more informations on both 4 swap partitions).
- I would like to thanks personally my friend @Yank555 to help finding some zRam initialization problems.
21.11.2013 : v3.2.0 released.
Add several TCP congestion control modules :
- Westwood
- BIC
- HTCP
'cubic' TCP congestion will stay as default like stock. You can set your favorite congestion module via TricksterMOD app.
20.11.2013 : v3.1.2 released.
ramdisk : add same root helper files + modifications as v2.1.0. Hopefully it will definitely fix root losing (for some people).
20.11.2013 : v3.1.1 released.
ramdisk : add 'root helper' again to avoid losing root after flashing for some people.
19.11.2013 : v3.1.0 released.
Enabled back: Persistent TRIM support for all partitions.
Enabled back: USB charging increased (to 900mA instead of 475 by default).
18.11.2013 : v3.0.0 released.
Total redesign again from Samsung update1 (SEA) chinese source.
Removed a LOT of tweaks (back to 'stock way' for real), battery life should be much better than before.
List of removed tweaks :
- Removed: NTFS support.
- Removed: CIFS support.
- Removed: NFS support.
- Removed: Proportional Rate Reduction for TCP.
- Removed: Network speed tweak.
- Removed: Decreased touch boost frequency (from 800 to 600Mhz).
- Removed: Doubled min-max readahead.
- Removed: ipv4: save CPU cycles from "check_leaf()" (backport from Linux 3.8).
- Removed: Intelli memory writeback (0 when screen ON & 500ms when screen off).
- Removed: Higher random entropy.
- Removed: Enabled persistent TRIM support for all partitions.
- Removed: Dynamic FSync control (v1.2).
- Removed: "GENTLE_FAIR_SLEEPERS" disabled.
- Removed: USB charging increased (to 900mA instead of 475 by default).
- Removed: "cpu_load_slope" correctly set.
- Removed: bcmdhd : Disabled multicast on suspend.
- Removed: AIO enabled (backport of Linux 3.6.x) and tweaked.
- Removed: Westwood TCP congestion.
Some optimizations into litegx_defconfig.
TricksterMOD app should be compatible with the kernel (again).
Overall kernel size is now slightly lighter (again) than previous version.
17.11.2013 : v2.1.1 released.
ramdisk : Modified 'root helper tweaks' (again) to remove many useless lines, which finally now finally looks like more as an 'init.d helper'.
ramdisk : Many useless files in 'sbin' folder has been removed to let only needed ones for 'root helper tweaks'.
Overall kernel size is now slightly lighter than before.
15.11.2013 : v2.1.0 released.
Revert source back to update12 from Samsung.
Original ramdisk base from ZCUBMK2.
ARM : Neon & Hard-Float support (thanks to @googy_anas).
14.11.2013 : v2.0.0 released.
Directly based on update1 XXUGMJA SEA JellyBean Android 4.3 (chinese) source from Samsung (for clean work and stability).
litegx_defconfig : Disable 'Samsung Rooting Restriction Feature'
12.11.2013 : v1.6.3 released.
Upgraded to ZCUBMK2 Android 4.3 ramdisk.
Fixed 'init.d' support (forgot it in previous 1.6.2).
12.11.2013 : v1.6.2 released.
full ramdisk from (this time) pure stock XXUGMJ9 instead of repacked WanamLite 7.2 ROM one.
ramdisk : modified 'root helper tweaks' from adam kernel to fit the needs of LiteGX kernel only (removed build.prop and pegasusq governor tweaks).
It was already the case before but I prefer to precise it : in case you encounter the message "fix root" after flashing my kernel before rebooting from recovery, you can choose yes or not, it will be the same : you will not loose root.
11.11.2013 : v1.6.1 released.
touch_wake.c : forgot description of bump to 1.1a.
11.11.2013 : v1.6.0 preview.
Touch-to-Wake v1.1a finally implemented ! (credits to @Ezekeel & @Yank555) and enabled by default with 5 seconds delay. If you guys are unhappy with it or would like to set another value, just set it via Trickster MOD.
11.11.2013 : v1.5.2 released.
Reverted patch: "ExFAT loaded as external module" (causing ExFAT not working anymore).
11.11.2013 : v1.5.1 released.
Added one more modification to "Disable multicast on suspend" (thx to @googy_anas).
11.11.2013 : v1.5.0 released.
Samsung Rooting Restriction Feature removed (thx @googy_anas).
ExFAT loaded as external module (thx @googy_anas).
Reverted patch: "MMC: Fix the workqueue overload battery waste (cm patch)".
09.11.2013 : v1.4.0 released.
Updated compilation toolchain Linaro GCC from 13.09 to 13.10 (20131014).
09.11.2013 : v1.3.0 released.
zRam activated (but disabled by default). Use any profile to activate it (grab them into post #2).
zRam : use LZ4 compression.
zRam profiles are compatible and working same way as LiteGX 4.1.2 version.
09.11.2013 : v1.2.0 released.
Add NTFS support.
Add NFS support.
Add CIFS support.
Disabled kernel debugging : Samsung / sec_log / last_kmsg / touchscreen / modem / max77686 / sec_watchdog.
08.11.2013 : v1.1.0 released.
USB charging increased (to 900mA instead of 475 by default).
Allow manual brightness to 300 candela.
CRT-off effect support (early_suspend set to 100ms).
xbox controller support.
Native ExFAT support (from official Samsung source).
Triangle Away support.
4x zRam swaps capability (instead of single one).
Dynamic FSync control (v1.2).
Optimized ARM CPU topology.
"ARCH_POWER" enabled.
"SCHED_MC" added.
"SCHED_MC_POWER_SAVINGS" set to agressive value (2) by default.
"CONFIG_SCHED_AUTOGROUP" enabled.
ROW scheduler & blk-core tweaks.
AIO enabled (backport of Linux 3.6.x) and tweaked.
Dynamic Screen Frequency Scaling capability (for ZZMoove governor).
Intelli memory writeback (0 when screen ON & 500ms when screen off).
Enabled persistent TRIM support for all partitions.
MMC : Fix the workqueue overload battery waste.
"GENTLE_FAIR_SLEEPERS" disabled.
Higher random entropy.
Decreased touch boost frequency (from 800 to 600Mhz).
ipv4: save CPU cycles from "check_leaf()" (backport from Linux 3.8).
"cpu_load_slope" correctly set.
Doubled min-max readahead.
"Westwood" TCP congestion module enabled and set as default.
Enabled "bic" and "htcp" TCP congestion modules.
Network speed tweak.
Proportional Rate Reduction for TCP.
bcmdhd : Disabled multicast on suspend.
Android logger disabled.
Disabled various debug in defconfig.
08.11.2013 : v1.0.0 released.
Directly based on update12 source from Samsung (for clean work and stability).
Compiled with latest available Linaro GCC 4.7.4 (13.09 / 20130903) toolchain (with flags optimizations).
Ramdisk from XXUGMJ9.
ZZMoove (v0.7d) governor (added and set as default)
row (v4) optimized and as only I/O scheduler.
Wolfson Boeffla Sound (v1.6.4 drivers) compatibility.
init.d support.
Thanks & greetings
★ THANKS & GREETINGS ★ :
XDA board and community
Google
Samsung
CyanogenMod Team
gokhanmoral
AndreiLux
wanam
spica1234
ZaneZam
Yank555
googy_anas
hardcore
Lord Boeffla
DONATIONS
★ DONATIONS ★ :
Many thanks to @letmarebrmbarove ! :good:
Many thanks to @batahulu ! :good:
Many thanks to @sqlpro ! :good:
Thank you to support my work guys !
Hi,
Firstly, thank you for your hard work on this kernel.
I flashed the kernel after wiping cache and dalvik. What I noticed is that Trickster mod does not pickup all 4 cores. Only 1 core is shown. Also, frequency lock is set to On, but no frequencies are shown. No scheduler is shown either. Cpu -z shows all cores.
Other than that, everything is running smoothly so far. The wake lock issue doesn't seem to be present. I'll report back with any other issues I find.
Thank you again. I've been using your Kernels since I bought my phone and I find them to be perfect for my needs.
Edit: I'm using Gorgoid 3.2
flashing right now. thanks
EDIT: wake up bug is gone. everything seems ok for a few hours of using. next is battery life. charging right now.
Thanks, you did it faster than i expected, will flash 4.3 this weekend.
Sent from my GT-I9300 using XDA Premium 4 mobile app
Awesome i will try it now and tonight or tomorow i will give feedback .
Hope batterylife is better than stock and the wake up bug is gone .
Thanks for your work
modded by Xposed Framework.
Thanks for your work! :good:
Waiting some feedbak from users, but for sure I will try it :highfive:
Thanks guys, glad you like it, even if it's still far than my 4.1.2 LiteGX version, still a lot of work to do!
rodlane said:
What I noticed is that Trickster mod does not pickup all 4 cores. Only 1 core is shown. Also, frequency lock is set to On, but no frequencies are shown. No scheduler is shown either. Cpu -z shows all cores.
Other than that, everything is running smoothly so far. The wake lock issue doesn't seem to be present. I'll report back with any other issues I find.
Click to expand...
Click to collapse
I can confirm this bug, looks like TricksterMOD is not well supported by 4.3 detection for the moment I guess. Try to use SetCPU for the moment which works well, and PerfMon to see behaviour of 4 cores in live, looks like all cores are working properly here :good:
F3nr1s said:
Hope batterylife is better than stock and the wake up bug is gone
Click to expand...
Click to collapse
Thanks to informing me about this bug, I wasn't aware of it, since I just migrated to 4.3 yesterday.
For the moment I never encountered this bug so far, but I'll let you know as soon as I'll face it.
I just hope official update12 source solved it, of we will have to wait for non-official dev fix, or future update13 source :cyclops:
Thank you. I'll Perfmon. I don't really play around with cpu settings much, although I do use Trickster mod to check that everything is running the way it should.
Another issue just noticed while typing this post is that my phone is heating up. Cpu-z reading is 40° C. Not sure if it's a 4.3/chrome/kernel issue. I never had this problem 4.1.2 using Chrome.
One more kernel for 4.3. This is really good!
Thanks man!
Thank you
Major update !
★ UPDATE ★ :
08.11.2013 : v1.1.0 released.
USB charging increased (to 900mA instead of 475 by default).
Allow manual brightness to 300 candela.
CRT-off effect support (early_suspend set to 100ms).
xbox controller support.
Native ExFAT support (from official Samsung source).
Triangle Away support.
4x zRam swaps capability (instead of single one).
Dynamic FSync control (v1.2).
Optimized ARM CPU topology.
"ARCH_POWER" enabled.
"SCHED_MC" added.
"SCHED_MC_POWER_SAVINGS" set to agressive value (2) by default.
"CONFIG_SCHED_AUTOGROUP" enabled.
ROW scheduler & blk-core tweaks.
AIO enabled (backport of Linux 3.6.x) and tweaked.
Dynamic Screen Frequency Scaling capability (for ZZMoove governor).
Intelli memory writeback (0 when screen ON & 500ms when screen off).
Enabled persistent TRIM support for all partitions.
MMC : Fix the workqueue overload battery waste.
"GENTLE_FAIR_SLEEPERS" disabled.
Higher random entropy.
Decreased touch boost frequency (from 800 to 600Mhz).
ipv4: save CPU cycles from "check_leaf()" (backport from Linux 3.8).
"cpu_load_slope" correctly set.
Doubled min-max readahead.
"Westwood" TCP congestion module enabled and set as default.
Enabled "bic" and "htcp" TCP congestion modules.
Network speed tweak.
Proportional Rate Reduction for TCP.
bcmdhd : Disabled multicast on suspend.
Android logger disabled.
Disabled various debug in defconfig.
Enjoy :good::good:
Still a lot of work to do to include last tweaks/features of LiteGX 4.1.2 (like zRam, touch-to-wake, etc).
Stay tuned!
Btw, I found the buggish patch who caused a freeze into samsung I9300 boot logo, it was caused by linux printk, so no kernel logging disabled for the moment.
Looks Nice
Added as always ( Pardus HD Rom Premier 4.3 ) :good:
Thank! I will try flash right now!! I Love your kernel for 4.1 , hope this version can fix bug lockscreen delay and batterylife!
Testing on Neatrom..
Enviado desde mi GT-I9300 mediante Tapatalk
You can add zzmove profiles? . thanks
raff222 said:
You can add zzmove profiles? . thanks
Click to expand...
Click to collapse
Top of 2nd post :good:
Perfect batterylife! Awesome kernel!! LOVE IT.. xD thank you @AndroidGX.
Sent from my GT-I9300 using Tapatalk 2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WARNING :
This kernel is only for Galaxy S3 International (GT-I9300) version,
and running Android 4.3 (Samsung ROM's) !
Click below to read the full story..
Many of you knows already knows me from my older LiteGX kernel series (for Android 4.1.2 & 4.3).
This time for SimpleGX, I would like to be closer of stock than LiteGX by removing a lot of unneeded things which finally were not gaining any battery stat at all. I had to review everything from zero (once again !).
SimpleGX is only looking for simplicity and stability, trying to aim for best battery life, smoothness and performance experience, than a pure stock kernel.
SimpleGX will now abandon all scripts that I created for LiteGX (even if some of them are still compatible but not recommended).
I really would like to create back a kernel which was my main idea, a kernel “flash-and-play”, nothing to configure, no need to be a nerd, every newbies can have directly best battery life and smoothness once flashed. Of course that’s every kernel cookers wants, but I would not qualify mine as a real “custom kernel”, since it’s not offering any app to configure it and having much more opportunities, at the cost of many random instabilities (freezes, lags, reboots, etc).
There is many differences between LiteGX and SimpleGX, you will have to compare threads if you want to know them.
I really would like once again to give a huge thanks to my friendly devs (post #3) who helped me a lot during all kernel building phase, learning me, and making adventure possible. I can tell also that Google is really a good friend, I confirm that ^^
I still don’t qualify myself as of a real developer, but just a basic person with some android/linux knowledge already.
As always, I’am enjoying sharing my contribution here on XDA for free, which taking me a lot of time to release, so if you can offer me a little beer (as I’am still jobless yet), I will really appreciate that and you will be added into post #4 ! LiteGX had more than 10000 total downloads, I let you imagine if everybody gave me at least a single dollar ! ^_^
This kernel must be only flashed over an official Samsung ROM and not AOSP/AOKP !
Feel free to include my kernel to your ROMs / Threads but please don't forget to inform/ask first via PM and credit me in your original thread.
★ WHAT TO EXPECT ★ :
(over a pure stock kernel) :
Best battery life experience.
Much better overall performance.
Efficient (only proven to be good ones and not affecting battery life) tweaks.
Stay as close as possible from stock source.
★ FEATURES (up-to-date) ★ :
Base :
Directly based on "GT-I9300_JB_Opensource_Update14" (XXUGND5) JellyBean Android 4.3 source from Samsung (for clean work and stability).
Compiled with Linaro Cross Compiler (4.7.4 / 2014.06) toolchain (optimized for Cortex-A9) with optimization flags.
Ramdisk from XXUGNJ2.
Main :
ZZMoove (v1.0 beta4) governor added (and currently as default). Built-in profiles available HERE.
ZEN as only I/O scheduler.
Wolfson Boeffla Sound (v1.6.6 drivers) compatibility.
hardcore mDNIe tweaks (for better colors + sharpness fix for better readability).
Touch-to-Wake (v1.1a) (enabled by default with 5 secs).
USB charging increased to 900mA.
Allow manual brightness to 300 candela.
init.d support.
Native frandom support.
Native ExFAT (v1.2.9) support.
Native xbox controller support.
CRT-off effect friendly (early_suspend set to 100ms).
Westwood TCP congestion control module activated (and currently as default).
TriangleAway support.
Various tweaks :
All logging and debugging disabled.
Tweaked LMK (LowMemoryKiller).
speedup late resume tweak (faster wakeup of the device).
"GENTLE_FAIR_SLEEPERS" disabled.
"ARCH_POWER" enabled.
"CONFIG_SCHED_AUTOGROUP" enabled.
CRC disabled.
USB OTG enabled.
Doubled min-max ReadAhead.
random: increase entropy levels (both read and write).
writeback: fix occasional slow sync.
slub.c: little tweak for performance improvements.
Misc :
Fully compressed libs ".ko" modules.
Automatic dalvik-cache wiping in kernel flashing procedure.
Automatic verification of android version during flashing procedure.
Features that will NEVER be included in this kernel :
Overclock / Underclock / Undervolt.
ZRAM/SWAP support.
auto-root.
LED control.
Charge control.
Master sequence (screen calibrated).
ABB (Adaptive Body Bias).
Any upgrade of Linux kernel 3.0.XX.
STweaks compatibility.
Dual-Boot Sammy/AOSP.
CyanogenMod compatibility.
MIUI compatibility.
etc.
★ PREREQUISITE ★ :
Any odexed or deodexed international I9300 Samsung 4.3 Jelly Bean ROM.
A custom recovery (CWM recommanded) to flash the kernel.
Be sure to remove any of your init.d scripts which can meet conflicts with the kernel.
★ SOURCE (up-to-date) ★ :
Github >> SimpleGX.
~> DOWNLOAD LINK <~
Need supports ? all kind of questions must be posted on this thread directly. Be sure to read at least completely this first post before asking any question.
If you enjoy this kernel, don't forget to rate this thread
stars, and clicking the 'thanks' button (right below) is always appreciated to keep this thread maintained
LIKE MY WORK ?
OFFER ME A
!
Changelog
★ All ZZMoove profiles can be found HERE ★
★ CHANGELOG ★ :
29.11.2014 : v3.5.1 released.
Updated ZZMoove governor to 1.0 beta4.
Upgrade full ramdisk from XXUGNJ2.
23.11.2014 : v3.5.0 released.
Stock ZRAM activated back with stock values (excepted 80% swappiness, instead of 60 by default), (no more launcher force close within my whole day experience).
I decided to bring back some interesting performance tweaks from my old LiteGX kernel (which are safe, absolutely close to stock and finally sufficient proved):
- writeback: fix occasional slow sync.
- slub.c: little tweak for performance improvements.
- random: increase entropy levels (both read and write).
Overall kernel experience is now more smooth and reactive.
I also changed all download links from the thread to point to my new personnal ftp (so you will now have to click "download link" from post #1). Downloads will now be faster than ever (no more need of dropbox, etc).
09.11.2014 : v3.4.3 released.
Updated ZZMoove governor to 1.0 beta2
31.10.2014 : v3.4.2 released.
LMK (LowMemoryKiller) tweaks (add +10MB everywhere on 'minfree' file). This should fix stock samsung low memory related problems.
19.10.2014 : v3.4.1 released.
Update ExFAT to version 1.2.9.
Upgrade full ramdisk from XXUGNH4.
15.10.2014 : v3.4.0 released.
Updated ZZMoove governor to 1.0 beta1 (credits @ZaneZam).
Added some patches which was necessary for new ZZMoove 1.0 version:
- simplegx_defconfig: Enable support for CPU temperature reading.
- nohz: Fix update_ts_time_stat idle accounting.
- mach-exynos: Support for current CPU temperature reading from Exynos4 TMU driver.
08.10.2014 : v3.3.2 released.
Finally achieved frandom support fully working and operational (thanks again to @Lord Boeffla for his help).
ramdisk: busybox replaced by the one from Boeffla kernel.
ramdisk: removed useless custom "busyboxlitegx" (+ will save some kernel size).
06.10.2014 : v3.3.1 released.
frandom module now fully and correctly loaded this time (it wasn't the case until now). Thanks to @Lord Boeffla for his precious help.
Some internal ramdisk init changes (modules are now loaded directly from my custom ramdisk script and no more from init.rc).
04.10.2014 : v3.3.0 released.
Updated cross compiler toolchain to 2014.06.
09.09.2014 : v3.2.2 released.
Introduce ZEN I/O scheduler and set as default (and only) scheduler (from my first tests, seems to overall perform slightly better than ROW).
ROW I/O scheduler completely removed.
07.09.2014 : v3.2.1 released.
"CONFIG_SCHED_AUTOGROUP" enabled (will bring multitasking possibilities).
04.09.2014 : v3.2.0 released.
Upgrade full ramdisk from XXUGNG3.
Click below to see older changelog ..
31.08.2014 : v3.1.2 released.
All debug disabled (again) from defconfig side (at the exception of USB).
Due to this above, slightly lowered overall kernel size (again also).
30.08.2014 : v3.1.1 released.
Fixed GPS (which was broken since v3.0.0).
speedup late resume tweak (faster wakeup of the device), added again.
Set back pure stock Update14 defconfig with kernel needs only.
17.08.2014 : v3.1.0 released.
Update ZZMoove governor to 0.9 (beta4).
Fixed ExFAT support.
Update ExFAT to version 1.2.7 (Samsung OSRC from KK sources).
15.08.2014 : v3.0.0 released.
Now directly based from new latest official Samsung source "GT-I9300_JB_Opensource_Update14" (XXUGND5).
speedup late resume tweak removed (from my first tests, it looks useless since new source).
Bunch of debugging part from new defconfig source disabled.
Overall kernel size has been slightly lowered.
15.07.2014 : v2.0.1 released.
Update ZZMoove governor to 0.9 (beta3).
24.06.2014 : v2.0.0 released.
Finally fixed high "Android OS" usage at top of battery stats.
speedup late resume (faster wakeup of the device) (credits Yank555 & AndiP).
Many new (and new way) toolchain optimizations (credits JustArchi).
Compiled with highest possible optimization level (-Ofast).
ALL logging and debugging disabled (credits Yank555, AndiP & JustArchi) :
- android logger.
- kernel logger.
- code side.
- defconfig side.
- init side.
All ".ko" modules now compressed with Linaro Cross Compiler 4.7.4 toolchain from Christopher83 (instead of stock google arm-eabi 4.4.3).
Now extracting/repacking kernel using ArchiKitchen (with latest mkbootimg tool) instead of obsolete dsixda kitchen.
Fixed a little mistake from my simplegx init script within ramdisk which was simply not working until now !
Both smoothest and best battery friendly release ever !
20.06.2014 : v1.9.2 released.
Update ExFAT to version 1.2.7.
16.06.2014 : v1.9.1 released.
Update ZZMoove governor to 0.9 (beta2).
Compilation toolchain optimization.
08.06.2014 : v1.9.0 released.
Update ZZMoove governor (and profiles) to 0.9 (beta1).
Removes Wheatley governor (useless at it was coded initially for dual cores anyway).
29.05.2014 : v1.8.0 released.
Upgrade full ramdisk from XXUGND5.
Some init ramdisk renaming (LiteGX > SimpleGX) that I forgot to do since.
09.05.2014 : v1.7.0 released.
Upgrade full ramdisk from XXUGND2.
30.04.2014 : v1.6.0 released.
Some compilation toolchain optimizations (smoothest release ever).
25.04.2014 : v1.5.0 released.
Upgrade full ramdisk from XXUGND1.
Add 'Wheatley' CPU governor.
(I tested it for few hours now and it looks I'am getting the best battery life experience with it over ZZMoove. Let me know what do you think of it).
20.04.2014 : v1.4.1 released.
Removed pegasusqplus and smartassv2 governors (useless and anyway I prefer to let only ZZMoove).
Removed some kernel code cleanup about pegasusqplus which was needed to get compiled.
19.04.2014 : v1.4.0 released.
Updated cross compiler toolchain to 2014.04.
frandom support is now fully working (kernel should be smooth as butter now).
31.03.2014 : v1.3.1 released.
Update ZZMoove built-in profiles to match latest corrections from Yank.
All ZZMoove built-in profiles (of 0.8) are available HERE.
21.03.2014 : v1.3.0 released.
ramdisk upgraded to XXUGNB6.
Boeffla Sound Engine updated to v1.6.6 (Allow full range volumes for speaker and headphone amplifiers).
ZZMoove 0.8 governor: add latest bug fixes from ZaneZam.
21.03.2014 : v1.2.0 released.
Update ZZMoove governor to 0.8
Change default governor from pegasusqplus to ZZMoove.
17.03.2014 : v1.1.0 released.
New more "stylish" UI when flashing the kernel.
Revert: "unstable power charging ignored" (charging was really faster but battery was draining much faster also, so back to stock).
Add native xbox controller support.
09.03.2014 : v1.0.0-noIUPC released.
Same version as initial, but with ignore unstable power charging removed, so USB tethering should work again (at the cost of a slow battery charging back).
FYI : the "no_IUPC" version means : no Ignore Unstable Power Charging.
08.03.2014 : v1.0.0 released.
Initial release (check actual features on post #1).
Thanks & greetings
★ THANKS & GREETINGS ★ :
XDA board and community
Google
Samsung
CyanogenMod Team
gokhanmoral
Andreilux
wanam
spica1234
ZaneZam
Yank555
DerTeufel1980
googy_anas
hardcore
Lord Boeffla (AndiP)
Christopher83
dsixda
JustArchi
Donations
★ DONATIONS ★ :
Many thanks to @fuxmen ! :good:
Many thanks to @colingpt ! :good:
Many thanks to @letmarebrmbarove ! :good:
Many thanks to @batahulu ! :good:
Many thanks to @sqlpro ! :good:
Thank you to support my work !
Another one from the master. can't wait to test. CHEERS Bro, all the best with your New Kernel.
Nice one - I'll be giving this a go :good:
tnx a lot
@AndroidGX , is it OK installing this kernel na5 neat rom? Thanks for the advise
Sent from my Nexus 7 using Tapatalk
sqlpro said:
@AndroidGX , is it OK installing this kernel na5 neat rom? Thanks for the advise
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Should be OK - it's fine on NA7 Neat.
Nandroid first just in case
Sent from my GT-I9300...
Spannaa said:
Should be OK - it's fine on NA7 Neat.
Nandroid first just in case
Sent from my GT-I9300...
Click to expand...
Click to collapse
I know it will be fine on na7 but I am using na5 base so was not sure. Thank for the reply.
Sent from my GT-I9300 using Tapatalk
i will try this one out
by the way, is there any app by which i can configure the settings? like Stweaks or Boeffla Config?
reywal said:
i will try this one out
by the way, is there any app by which i can configure the settings? like Stweaks or Boeffla Config?
Click to expand...
Click to collapse
It's a plug and play, but if you want, you can try trickster for setting stuff like zram on or off, but nothing much to do though.
Your Kernel really rocks. I have been always using your Kernel for close to stock. I am still using LiteGX.
I have tried several one but was looking for one which is hassle free. Your is the one.
This one I will not use now due to USB tethering broken, will wait for next version with that fix.
sqlpro said:
@AndroidGX , is it OK installing this kernel na5 neat rom? Thanks for the advise
Click to expand...
Click to collapse
As long as you flash it on android 4.3 and that the automatical script during procedure won't stop you before checking, then you are good to go
When samsung release his (for example 4.3) source, you can be sure that it will be compatible with every 4.3 future coming firmwares :good:
Sometimes a ramdisk upgrade can also help in some case, so if needed I will do it, no worries
reywal said:
by the way, is there any app by which i can configure the settings? like Stweaks or Boeffla Config?
Click to expand...
Click to collapse
As stated in the story part of post #1, and as Mosh Edd said, this is a flash and play kernel :good: but you can still configure governor settings or some options directly via TricksterMod/SetCPU, etc (don't forget to keep settings after rebooting).
Mosh Edd said:
like zram on or off
Click to expand...
Click to collapse
I intentionally disabled stock ZRAM which was on by default via defconfig so no way to activate it manually :angel:
I decided to always disabled it now on SImpleGX, since zram is eating battery a bit and after some ours of use you will face some random lags.
KSKHH said:
This one I will not use now due to USB tethering broken, will wait for next version with that fix.
Click to expand...
Click to collapse
I informed Lord Boeffla about this bug which affects every kernels, he will take a look as soon as he can :good:
By waiting, I will maybe release a "no_IUPC" (no Ignore Unstable Power Charging) version in parallel for each releases, so each one will choose directly if they prefer fast charging or slow charging but with USB tethering working. I intentionally used IUPC as default because wifi it still working to share (for the few I'am using it..) and that I prefer to not wait hours to charge only 10% of my device
AndroidGX said:
As long as you flash it on android 4.3 and that the automatical script during procedure won't stop you before checking, then you are good to go
When samsung release his (for example 4.3) source, you can be sure that it will be compatible with every 4.3 future coming firmwares :good:
Sometimes a ramdisk upgrade can also help in some case, so if needed I will do it, no worries
Click to expand...
Click to collapse
Thanks for the reply mate. I just installed and all seem to be fine so far. will test couple of more days and update here.
BTW do we need to clean init.d folder ? i know boeffla andi frequently recommends cleaning up init.d folder. is this necessary with your kernel. Note, i dont have any issues so far (only used few mins though).
Thanks for the advise.
sqlpro said:
BTW do we need to clean init.d folder ? i know boeffla andi frequently recommends cleaning up init.d folder. is this necessary with your kernel. Note, i dont have any issues so far (only used few mins though).
Thanks for the advise.
Click to expand...
Click to collapse
He is right because some init.d scripts can affects stock settings from governors for example or try to enable/disable things that is not from my kernel, etc :good:
For exemple, I'am using NeatROM 6.5 and I can see that there is a lot of scripts in init.d already by default bur they don't affect any of kernel part so it's ok
There's no other solution that checking manually each of them, sadly.
Hi,
Thanks for the new kernel!
I come from the latest LiteGX kernel, so I run the cleaner script before flashing this one. My phone hangs when I reboot. I restarted my phone to get it to boot, but then I now have SwiftKey not loading. What could be the problem?
I reverted back you LiteGX for now.
Sent from my GT-I9300 using Tapatalk
I flashed kernel last night and waited until phone settled. Checked if all works fine, and it does, and then put the phone in flight mode.
This morning I checked battery stats and it looks like battery was charging a bit while in flight mode (phone was not connected to any power source).
Funny
All is super smooth. Thank you :thumbup:
Sent from my GT-I9300 using xda app-developers app
rodlane said:
I come from the latest LiteGX kernel, so I run the cleaner script before flashing this one. My phone hangs when I reboot. I restarted my phone to get it to boot, but then I now have SwiftKey not loading. What could be the problem?
Click to expand...
Click to collapse
Strange, as I'am using SwiftKey also and no problem here. If phone hangs at boot this it not normal, did you tried to re-download the kernel from first post ? (maybe a bad download).
If problem still here, maybe try to Try to wipe cache + dalvik from your recovery :good:
pexon said:
This morning I checked battery stats and it looks like battery was charging a bit while in flight mode (phone was not connected to any power source).
Funny
Click to expand...
Click to collapse
I confirm this is funny :laugh:
By waiting, I advice you also to try a wipe cache and dalvik before reaching another 100% and disconnect again to verify :good:
I will try this night aswell to confirm or not if I have the same bug
3.0.31? Why no update to 3.0.101?
Enviado desde mi GT-I9300 mediante Tapatalk
Beware of googleys
FRANK
Device tree is patched mako 5.1.1 with flo's M source
Layers
Day/Night theme switcher from first M preview
Init.d support
Advanced reboot
SuperSu 2.52 flashed with the rom
Volume rocker wake
Volume rocker cursor control
Long press quick settings control
Stock Like feel, please don't ask for features
Installation
Roms can change from update to update that sometimes you can dirty flash but if you have errors that other users don't then you will have to clean flash
First Time Installation:
Download the ROM and Other Optional files below.
Connect your Nexus 4 to the PC and transfer all the zips to the root of your device’s storage.
Reboot into recovery mode (Shut down, press VolDown + Power buttons. In bootloader mode, select Recovery mode)
Wipe the following partitions: System, Data and Cache
Install the ROM zip file
Let it boot. Setup now and wait for the ROM to settle.
Reboot into Recovery again and Install the remaining zip files.
Updating from previous version:
1.Download the ROM and Other Optional files below.
2.Connect your Nexus 4 to the PC and transfer all the zips to the root of your device’s storage.
3.Reboot into recovery mode (Shut down, press VolDown + Power buttons. In bootloader mode, select Recovery mode)
4.Wipe the following partitions: Dalvik-cache and Cache
5.Install the ROM zip file
6.Reboot now
7.Let it boot. Setup now and wait for the ROM to settle.
8.Reboot into Recovery again and Install the remaining zip files.
9.If have issues with dirty flash, reboot and redo steps wiping DATA also
Sources
Mako GPL Kernel Source: Click here
Rom Source: Click here
Changelog
Code:
10-19 adreno update
new adreno libs duh
10-19
Minor update
enable systemui tuner by default
add scanning menu into location
speed up recent app back
10-15-15
Minor update
added aldy's kernel in and turned back on usb-otg in fstab
added minkin text layout engine in thanks to @ckret for pointing it out
10-14-15
bug fixes!!!
some changes on the device tree so anyone using it should update
can build with clang now thanks to @ckret for pointing out the fixes (we are still gcc compiled)
Fixed downloads dark theme thanks to Branden M
Fixed supersu and layers icons being off on the dark theme, thanls Branden again
ambient display color layers inversion fix up ported from lollipop
Fix annoying usb mounting to computer (Thanks to snak3ater pointing this out to zephik)
10-13-15 update-1
added volume rocker wake (in settings/display to turn on)
add volume rocker cursor control
added animation transition animations of .25 and .75
set default animation speeds to .75
added long press recent button switches to the last app
removed the spinner from optimizing apps dialogue so it is quicker at dexopting
added long press on quick settings tile takes you to their settings menu
minor sepolicy fixes
disabled the after flash image verification (was breaking multirom flashing)
10-13 build
Fixed mac address bug thanks to this pull request
https://github.com/marshmako/device_lge_mako/commit/49b11281e25e434d7f56c4677e663e8dff87ccad
Fix a bad copy pasta of the init usb midi support
12-12
Added ambient display and full rotation
removed some debugging code
sped up a few things
Frank 10-12-15 with theme switcher, update 1
added google exchange services included in the build, it replaces exchange2
should be able to remove the layers manager icon from the launcher now
removed cell broadcast receiver
added the locked update receiver commit
beanstown found a line to set doze power saving mode that was set to off in aosp so turn it on
https://www.androidfilehost.com/?fid=24052804347836304
10-12 theme switcher update
added day/night theme switcher back to dev settings like what was in M dev preview 1 (only does settings, bluetooth and package installer so we will have to expand on this for layers), will prob move the switch out to the dashboard below layers or some place later.
added https://github.com/BenzoRom/framewor...54a3aa73367bde which should give core google apps default permissions out the box (you might still have setup wizard bug though)
Your current layers themes will only work properly in light mode
new in 10-11-2015
Removed art optimize everything till we have fully deodexed gapps
advanced reboot
init.d support
supersu and layer manager embedded in setting (you need layers manager of course) (forgot to add the hide icon part )
too tired for the rest so just read the commit history if you wanna know more https://github.com/marshmako/platfor...b5b1c3bc4419da https://github.com/marshmako/platfor...6896b4d256a871 pretty much just kanged a bunch of commits from zephik there.
new in update 1.
fixed init.d, removed aosp clock and aosp mms apps. Use updated and better google versions
added missing files for miracast
Downloads
Current Build = https://www.androidfilehost.com/?fid=24052804347841621 10-19-15, adreno update had broken wifi
Gapps = https://www.androidfilehost.com/?fid=24052804347841244 Txuki
or
Gapps = https://www.androidfilehost.com/?fid=24052804347841070 banks
Backup Gapps down below if those don't work
gapps without setup wizard if you get wizard fc upon boot thanks to barome (modifed version without setup wizard of above)
just access play store to be able to log in with your google account
http://renderserver.net/?dl=6455ad109b871809d8f34b25a92f6904
For those interested in the commits for the theme switcher
https://github.com/marshmako/platfo...mmit/da669b1ebda7ee8ac7a39d181eb944290ce9ea72
https://github.com/marshmako/platfo...mmit/00b529c60d31e554b9c090c03f02ce06a652135a
https://github.com/marshmako/platfo...mmit/3c683a0124129bda309615a281fc3feb3ec58fde
https://github.com/marshmako/platfo...mmit/22c13d6bfd5dee4843a6fdca953350d7f56b7066
https://github.com/marshmako/platfo...mmit/4f298e8f8ab2c08f0e8c4ae92da72b01e0db6b5d
https://github.com/marshmako/platfo...mmit/4136e2ff29a84be80f8bf7f83a357fb0342e6718
Click to expand...
Click to collapse
Current layers themes will only work on light themes until adapted
OT talk is welcomed in my threads and development is done in the open. I encourage involvement in the project in any way.
Please do not complain about OT, it encourages a fun and relaxed environment
Like the work I did, consider donating. I'm currently not working so it helps feed me
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=BPFLE54YPRV92
Yes, my PayPal account is thatguy32404, I like to keep my banking stuff separated from my social account
XDA:DevDB Information
[L][5.0] Frank N4 - Aosp builds in testing [1-11-2015], ROM for the Google Nexus 4
Contributors
sykopompos, bgill55
Source Code: https://github.com/marshmako
ROM OS Version: 6.0.x Marshmallow
Based On: Aosp
Version Information
Status: Stable
Current Stable Version: 13
Created 2015-02-27
Last Updated 2015-02-28
Reserved
Gapps are not working, help
Google apps are really goofy this early in MM
Deep sleep issues are caused by this
Check runtime permissions on google apps in settings/apps and check the three dot menu for system apps
SMS/MMS not working?
SMS & MMS is related to your APN and not the ROM. Check that.
Can I flash this over my 5.1..x rom?
Yes, but do a clean install
OMG x app is not working?
That's expected - a lot of apps need to be updated to be compatible with L
OMG xPosed is not working?
Do not use lollipop Xposed on Marshmallow
[/Quote]
grabbed this from @vomer 's preview thread
[/HIDE]
nexus devices threads
Mako
http://forum.xda-developers.com/nexus-4/development/lpv-79-mako-port-beta-t2807446
hammerhead
http://forum.xda-developers.com/google-nexus-5/development/l-android-lpv-dev-n5-enhanced-t2856934
ramjet73 said:
My 5Ghz WiFi works fine.
For those people having issues with 5Ghz trying changing your channel to one of those listed in this post:
I'm currently using 44 which seems to be the sweet spot if that's available where you live.
Nexus 4 aren't able to see DFS channels due to the country regulations on transmissions. But some routers were using those channels when you set it to auto, so try changing your 5Ghz router channel to non-DFS channel like 40 or 48.
Non-DFS channels: 36, 40, 44, 48, 149, 153, 157, 161, 165
ramjet73
Click to expand...
Click to collapse
This is bleeding edge and may result in breakage, flash at your own risk.
Scroll down for updates, read everything.
This Kernel Takes the Best of Hellscore, Hellsdr, furnace, inception, mirage and Faux Kernel's for the ultimate performance on android L, this kernel is also compatible with Kitkat 4.4.4.
For all the features, use Synapse, and you must install UKM to see all the settings.
Grab UKM here
Grab Synapse here
Flash Busybox to enable /system/etc/init.d grab a flashable zip here
Faux Clock, Kernel Tweaker and other apps work, Synapse will show the most options
Older Kernels:
Features:
Intellidemand
Intelliactive
Intelli-Thermal
Intelli-Plug
Undervolting
FIOPS & ROW i/o Schedulers
Gamma Controls
Faux Sound
CM Gamma Controls
Double Tap to Wake
Init.d Support
Compiled with Linaro toolchain for speed
Only for Beta 4, flash in recovery
http://www.mediafire.com/download/he0fr6jl1liqehi/L-Kernel-Mako-Beta4.zip
New Kernel Beta 5 uploaded:
https://mega.co.nz/#!ikg11B5T!q71jC4pQL5sYK-rIVMn6dPHYiAOUq4sAMuN4zz4JWmY
New Features: Faux Sound, CM Gamma Control Interface
Beta 6: Internal Release to debug dt2w
Beta 7 Released with Double Tap 2 Wake:
https://mega.co.nz/#!jlwjQQSL!2Qh2_hSrw0nGdxZmo9hWTtCkkqsfCB_091gkw2nPixA
http://www.mediafire.com/download/5856max427q9t59/L-Kernel-Mako-Beta7.zip
Beta 8 Released with Faux Speaker:
http://www.mediafire.com/download/0j52si5500d3a7w/L-Kernel-Mako-Beta8.zip
L-Kernel Beta 9 Uploaded
http://www.mediafire.com/download/bv1fnffm66cwfg1/L-Kernel-Mako-Beta9.zip
*warning* if your CPU cannot handle -100 undervolt flash beta 8, I'll be reverting this change when I'm back home on Sunday.
Changes:
Lower 81Mhz CPU freq, and lowered voltages to -100mv by default and reduced CPU steps, you guys must reset Synapse, and redo your voltages. This should increase battery even further.
Beta 10:
Added kexec hardboot, UV -100 still default.
https://mega.co.nz/#!29gVBKaT!uYpRdT5_hGtPUEehSM2pLLc4gtN97J6LA5cjfiS1qeA
New Ultra Kernel Build is up:
New Features:
Ultra Kernel Same Page Merging
Customized Lower backlight LUT for power Saving
Enabled TCP_westwood, vegas, veno, and cubic, set Westwood as default.
Added CK Patches for Speed and battery.
Added simple GPU Governor
Enabled 450Mhz GPU Overclock
Removed Undervolt -100 by default by request.
Now has default Faux CPU Voltage Table
Overclocked to 1.84Ghz
Notes:
You must reset Synape App data or Reinstall after reboot, also voltages will need to be adjusted.
You'll Need UKM, grab it Here
You'll Need Synapse, grab it Here
Kernel 15u:
https://mega.co.nz/#!zxAVyLiS!pkk1LycxUgNFs2sd31cM5FYhHW4Pf4M8lx1x1t3TRGA
Kernel 16u Fixes wifi:
https://mega.co.nz/#!SkAXVZIL!HFce8qB2k11MdjsQe5pgZBdS2MlIZhEed-TQKLFuNSk
New Kernel Build 18
https://mega.co.nz/#!e0pzgLYZ!L-L7YCB0Eia4oCtv16ZyQAMqVeKtIsQWbkC3LKUXtig
Fixed Wifi
Max Clock set to 1.5Ghz
Underclocked down to 94mhz
For those that like the OC, stick with 16u, with this you should get better battery life and great performance.
You need busybox installed for init.d support.
Synapse does not remount the system rw before setting an init.d script in WAKE, so first go to terminal or ADB Shell and type:
mount -o rw,remount /dev/block/platform/msm_sdcc.1/by-name/system /system then open Synapse and click Set Init.d script with sweep to wake.
In /etc/init.d/ you should now have a file named UKM_WAKE:
Code:
#!/system/bin/sh
#This file was generated automaticaly from Synapse/UKM.
#It contains wake options to be applied from init.d script.
echo 1 > /sys/devices/virtual/input/lge_touch/dt_wake_enabled
New Ulltimate Kernel Series Features:
Compiled with Linaro 4.7.4
New 3.4.99 Kernel
LZ4 Compression
Min Freq: 94500
Max Freq: 1512000
TCP: HTCP/HSTCP/HYBLA/VEGAS/SCALABLE/LP/VENO/YEAH/ILLINOIS/WESTWOOD(default)
FS: exFAT/F2FS
IO: ROW/BFQ/SIO/FIOPS/ZEN/VR/NOOP/CFQ/DEADLINE(default) / (default readahead - 512)
GOV: intellidemand/intelliactive/ondemandplus/wheatley/ondemand(default)/userspace/powersave/performance/interactive/SmartMax/Stockdemand
HotPlug: MPDecision/IntelliPlug(default)
Voltage Control
TouchWake
Semaphore DoubleTap2Wake
Bidirectional Sweep2Sleep
Sweep2Dim
Gamma Control
Battery Life eXtender
Force Fast Charge
FSync system call control
Faux123's Sound Control
FRandom
VFP Hardfloat
CPU-Boost via sysfs
Linaro's Power-Efficient Workqueue
Intelli-Thermal
Intelli-Battery
Ultra Kernel Same Page Merging
OTG
Fixed Wifi & More stuff I forgot lol
Older Ultimate Kernel Series Kernels: (depreciated) use Ultimate 2
Kernel 23u
https://mega.co.nz/#!a9RBlYqB!FPp1Cm...LGq8v_t_LGSS8M
Kernel 24u:
Added Simple GPU Governor & GPU Overclocking to 450
Added missed PowerHal lib so Input_boost works with intellidemand, intelliactive & intelli_plug
Added missed USB Host permissions file
https://mega.co.nz/#!zkxylbTB!XAsd-7SLaks2ho2sXxa1pS90u7HAgOxO5hehcF9uVeA
Kernel 25u:
Fixed Faux Speaker Amp controls
Misc Lowmemory Killer tweaks
https://mega.co.nz/#!m9AiWA6K!UPI5E0rlNJ0lwng7Azs7_zPpjUbvgl2HENdW4wwhC5o
Kernel 26u:
Fixed power.msm8960.so permission for boostpulse
http://www.mediafire.com/download/89n59fcqey8n3s9/defcon-26u-Preview_mako.zip
New Ultimate Series 2 Kernel: Based off of inception, hellsdr, furnace, ak, faux, codeaurora forum upstream code.
Updated to Kernel 3.4.101
Underclock down to 81mhz
overclock to 1.94Ghz
Fixed Prima drivers
completely removed MP_Decision and old hotplug code
MSM_hotplug improvements
Added lots of CPU Governors
Absolutely a ton of updates.
Updated LZO Compression to current upstream version
Brought Back Faux Gamma/Display Colors by request.
added Slimrom Governor with optimizations
Lots of misc optimizations
Updated Linao
Optimized Intelliactive
Updated oom killer to support for_each_thread
Updated lowmemorykiller
Thermal Improvements
Futex Optimizations
Entropy Tweaks
Add & enable MSM_SHAREDMEM
Backported 3.16 scheduler updates to reduce IPI storm
Optimized Ondemand
TCP optimizations
AES Crypto Speed boost & Optimizations
Fixed HDR Camera crashes
Fixed some security issues in previous kernels
Added Network Speed Tweaks
Disable Prima debug crap code
Lots of bug fixes and so much more that I forgot to mention, be sure to follow my github for a more in-depth changelog here
Added AutoSmp Hotplug by @mrg666
Added msm_hotplug by MyFluxi
Added Latest Intelli-Plug by @faux123
AutoSMP hotplug to default starting at 34u
Added Faux zRam & Latest Optimizations
Updated Kexec Hardboot Patch
Updated Faux Sound Control
Updated Intelli-plug to 3.8
Updated SLUB memory optimizations
Updated frontswap, zcache, zmalloc
Tons of old code removed like PMEM and Drivers that are not necessary
Added Motorola Memutils
ion Updates
ext4 speedups & tweaks
cpufreq updates
acpuclock updates
Implemented Codel packet scheduler
tcp autocorking & tcp small queues
Brought back faux color instead of franco's by request
Intelli-Active and Intellidemand Latest updates
Mass Memory optimizations
Mass Futex Optimizations
LCD Linear & Exponential Settings added
Slim Governor Added
mpdecision removed
Updated Crypto
Crypto Optimizations for encrypted tunnels
Network Performance tweaks
Added userspace io adjustments
Added Ultra Kernel Same Page Merging, because it kicks KSM's ass
Intelli-Thermal set on boot
KGSL updates
Older Ultimate 2 Kernels:
Download:
http://www.mediafire.com/download/mxqgh4yl1nx77ok/defcon-31u-L-Preview_mako.zip
Test this thouroughtly, be sure to clear synapse before install, update your voltages
New Ultimate 2 Series Kernel 34u:
Download:
https://mega.co.nz/#!C5BC3YZY!ySNsZ6wZWn0mk5OwOO-iZWpmX6FDgsq7YhAbA8rAQSg
http://www.mediafire.com/download/1rb617jyx7in2yd/defcon-34u-L-Preview_mako.zip
Autosmp as default hotplug:
https://mega.co.nz/#!KowEQIDJ!XkvTAR_I7UVNd6EdzOwCCm7bz16slKoyTvHg1WbZjOk
Note: clear synapse and uncheck all governors to use autosmp
To disable autosmp for other hotplugs use an init.d script because enabling an other hotplug will not disable autosmp unless you include this in init.d:
echo 0 > /sys/module/autosmp/parameters/enabled
@apb_axel said he is adding support for autosmp in next UKM release, stay tuned
Faux zram has been added
34u-zram
https://mega.co.nz/#!HxYEXbSa!H_zckE2cTCTrkrwbX1giHzkCfYYuzOvxW-iDJ-kdKyg
As requested here is a 4.4.4 Kitkat Kernel that is in anykernel format and should work with all Kitkat rom's
Version bump to 35u:
autosmp set to default hotplug(disable all hotplugs in synapse before reboot)
Faux zRam Added.
Repatched in kexec, because of problem reports
Kitkat Users Flash: (fixed)(fixed again lol)
https://mega.co.nz/#!q4oXVK7T!R8Na54rIUwQm19af1odmxCTQcoq0vIJWJsfaZ9D45W8
Android L Users Flash:
https://mega.co.nz/#!zsokUTRY!kefScnsSFicCjIDCao1Agdpr8QdkZ8mY-1rn1O0tYmI
Alternatively L users can flash Kitkat version, but init scripts depend on busybox installed.
Enjoy
Kernel 37u-r2:
Updated AutoSmp Hotplug
Updated Intelliactive
Updated Faux Sound Control
Updated Intelli-plug to 3.8
Added KSM/zram optimizations
http://www.mediafire.com/download/mq6v4y193p15rtw/defcon-37u-r2-AnyKernel_mako.zip
http://www.mediafire.com/download/mq6v4y193p15rtw/defcon-37u-r2-AnyKernel_mako.zip
Kernel 38u-r999:(fixed otg)
http://www.mediafire.com/download/a629kr04bbaii5f/defcon-38u-r999-AnyKernel_mako.zip
Ultimate Kernel 2 Updated to 41u:
Added savoca's newer msm_hotplug
lowmemory killer optimizations
added lcd_notify for msm_hotplug
max suspend cpu's set to 1 for battery savings
Download:
msm_hotplug by default version:
http://www.mediafire.com/download/v7dy1481edsjjdx/defcon-41u-AnyKernel_msmhp_mako_.zip
Kernel 43u-r2:
More script optimizations and further tweaked autosmp
Added autosmp hotplug tunables to 99defcon
Added GPU max freq to 400 on boot
I dont see the point in uploading two zips one, msm_hotplug and another autosmp
default set back to autosmp because its just better
Added misc ondemand updates
Added intelliactive as default cpu governor to 99defcon
Added Intelliactive BOOST to 99defcon init script
Added Minfreq down to 81mhz on boot
Added Power savings modes to be enabled at boot to 99defcon
https://mega.co.nz/#!ztw1xAyQ!iJkDyRdwUEqi0Tpw94G-W3u90UjHd-9_vFg_VkxNbQc
http://www.mediafire.com/download/o69e6ifnn93m79e/defcon-43u-r2-AnyKernel_mako.zip
New Unleashed Kernel Series 61u(ultimate)
New Kernel base based off bleeding edge Code Aurora Code(tons more things than I could list)
Fully Compatible with Android L
Fully Compatible with Kitkat
Fully Synced with mainline Linux 3.4.103-r1
Fully Removed mpdecision, & thermald, now using faux's latest intelli-thermal
Disabled MSM_Thermal because it was not keeping the temps down and lacks configurable options.(faux's is based on msm_thermal anyways and is much better.
Added F2FS Filesystem support
Added Faux Gamma by request to replace franco's
Added LoUIS API Cache maintenance ops to improve cpu hotplug efficiency/latency
Added Kernel Mode NEON acceleration
Disabled Prima debug for performance
added word-at-a-time ARM API Patches
enabled BPF JIT packet filter
disabled gentle fair sleepers in scheduler
Optimized and Secured AES/SHA1 routines
Updated Hardware Accelerated Random Number Generation from Qualcomm
backported Codel net scheduler from Mainline Linux and set it as default
Updated all CPU Governors with Latest Code Aurora Forum Code
Added Backported 3.8 Slub memory allocator from Linux 3.8
Added backported RWSEM from Linux 3.11 including lock stealing improvements
Added Backported mutex and rcu locking from Linux 3.10 & 3.8
Added Backported prandom & random updates from Linux 3.13
Built with Latest Linaro Toolchain available with -Ofast optimization
Removed unecessary Kernel debugging that slow down performance
Removed Tons of unneeded modules taking up memory and slowing down Android
Enabled Autogroup scheduler and applied per-uid task grouping for android
Removed PMEM completely, this is a Pure ION Kernel
Added glibc patch to imrpve performance of memcpy and memmove
Added Latest Memory optimizations from Motorola
Added Ultra Low 81mhz cpufreq
Added Ultra High Overclocking ability to 1.94GHz Per core
Added Ultra Kernel Same Page Merging for increased memory performance.
Added Latest OTG code available
Added GPU underclocking down to 27mhz
Added Latest Fast Charge code available
Synced Ramdisk with L-Preview (master) for improved compatibility with SELinux on android LPV81C
Added missing SE-Linux security options in defconfig
Westwood is set to default governor in Unleashed
Faux zram was removed because of its outdated code.
Added GPU Overclocking to 487mhz(400 is default)
Added Latest Franco Interactive GPU governor that replaced Simple GPU Governor
Added Latest Faux Speaker updates.
Added and Enabled Sweep to dim (Sweep over nav buttons left to reduce brightness(even past factory defaults) swipe right to increase.
Added BLX Battery Life extender(does anyone use this?) If so, here ya go
Added Latest double tap 2 wake code
Added Latest AutoSMP Hotplug, (default)
Added Latest Intelli-plug from faux(must disable autosmp in init or Synapse(when @apb_axel fixes it)
Added Latest CPU Voltage control
Added LZ4 ramdisk compression for increased boot speed
Added and enabled KEXEC Hardboot Patch
Synced to Latest linux 3.4.103-r1
And tons more stuff I forgot, check Synapse for the most options available
All future versions of this kernel are at the Ultimate Unleashed kernel thread:
http://forum.xda-developers.com/showthread.php?t=2845768
[KERNEL] [4.4.4/CM/(L)] [Bleeding Edge] Ultimate Unleashed Kernel Series
I would like to add another yay. If there are any bugs, be sure to report them, try and include a logcat too please. They could well be Android L bugs too.
love it !!!!
Does this work with cwm? Or Philz?
Sweetness
Sent from my Nexus 4 using Tapatalk 4
Let the party begin
N⁴
A Million Thanks to you all!
bitstra
Thanks! Thanks! and Thanks! who watched the other thread know how many days this port needed and how many work hours needed. You have all my respect!
Fatal1ty_18_RUS said:
Mirrors! Mirrors for everyone!
L Preview ver.9001 (aka OVER 9000) - Slim-version
Amazon Cloud Drive - https://www.amazon.com…-aZLd6rxO_u9lV6D36aDEA
ОБЛАКО@Mail.ru / [email protected] -https://cloud.mail.ru/…L-Stable-9001-Slim.zip
Яндекс.Диск / Yandex.Disk - https://yadi.sk/d/qJ9ClsscbmTvM
Google Drive - https://drive.google.c…VWeE0/edit?usp=sharing
MediaFire - http://www.mediafire.c…L-Stable-9001-Slim.zip
Dev-Host - http://d-h.st/zhR
OneDrive - https://onedrive.live.…A1287A31D842FC20%21252
Dropbox - https://www.dropbox.co…ble-9001-Slim.zip?dl=0
MEGA - https://mega.co.nz/#!B…x0bDrBm_fnQpCGzBRPrR1s
Copy - https://copy.com/Xevj4WkrCNBWJuzP
L Preview ver.9001 (aka OVER 9000) - Full-version
Amazon Cloud Drive - https://www.amazon.com…UZRO5WC7E6tKfTLM5WR_zE
ОБЛАКО@Mail.ru / [email protected] - https://cloud.mail.ru/…L-Stable-9001-Full.zip
Яндекс.Диск / Yandex.Disk - https://yadi.sk/d/KBUxuf0BbmTvR
Google Drive - https://drive.google.c…psYzg/edit?usp=sharing
MediaFire - https://www.mediafire.com/?fz4p9d74mzkzep7
Dev-Host - http://d-h.st/j4H
OneDrive - https://onedrive.live.…A1287A31D842FC20%21253
Dropbox - https://www.dropbox.co…ble-9001-Full.zip?dl=0
MEGA - https://mega.co.nz/#!t…s5ClE_Z-k3knUfOKDW9j8o
Copy - https://copy.com/BFMbpDDzTjm2laKf
Click to expand...
Click to collapse
Older versions:
Beta4 mirrors:
lpv-79-mako-port-beta4.zip mirrors
Google drive mirror: https://drive.google.com/file/d/0BxktHhMrAobWN0dneThDbU5rMDA/edit?usp=sharing
Copy mirror: https://copy.com/DzTgvIzDwiuU
Firedrive mirror: https://www.firedrive.com/file/4AFD1DA66F3E20FA
Mega mirror: https://mega.co.nz/#!7cNFHRyI!BpcriHj_fS1Yzy5FXPYljSsbcjKoiVxltVgCF-laubg
Romcook mirror: http://romcook.com/?d=53C624098
Dev-host mirror: http://d-h.st/NyP
Beta3-pre5
lpv-79-mako-port-beta3-pre5.zip mirrors
Google drive mirror: https://drive.google.com/file/d/0BxktHhMrAobWZzdjcktBNzhFa2s/edit?usp=sharing
Copy mirror: https://copy.com/okTyRMaDzTAZ
Androidfilesharing mirror: http://fs1.androidfilesharing.com/3bcda5eb60173acb
Mega mirror: https://mega.co.nz/#!LYFgFJDY!cKYQ_RTkeJMiq4DR1LMchMEoo9DN1Qw8Iy7041JyaQw
Romcook mirror: http://romcook.com/?d=53BD55618
Dev-host mirror: http://d-h.st/Nhq
Beta3-pre3
lpv-79-mako-port-beta3-pre3.zip mirrors
Google drive mirror: https://drive.google.com/file/d/0BxktHhMrAobWQlRxeDNvdll2dEU/edit?usp=sharing
Copy mirror: https://copy.com/8Ekmaro6ta4R
Androidfilesharing mirror: http://fs1.androidfilesharing.com/f4855c502313206a
Mega mirror: https://mega.co.nz/#!SF9giayb!DAPE4LqgoH3MGbHwgzWl_d1NqjFoNAE0TSULBsHYcc8
Romcook mirror: http://romcook.com/?d=53BB919216
Dev-host mirror: http://d-h.st/L5G
Firedrive: https://www.firedrive.com/file/F209D25CDF34C567
Beta-2 mirrors:
lpv-79-mako-port-beta-2.zip mirrors
Google drive mirror: https://drive.google.com/file/d/0BxktHhMrAobWOXp1YUhDNnh4TFE/edit?usp=sharing
Copy mirror: https://copy.com/UDiKkvcZWt2t
Androidfilesharing mirror: http://fs1.androidfilesharing.com/c7f0147d6feaa010
Mega mirror: https://mega.co.nz/#!SdFCDJ4T!qdt_T7fbiCK3xGSNFylHW_s-5IcDFEURps-XellLPiI
Romcook mirror: http://romcook.com/?d=53BA4B948
Dev-host mirror: http://d-h.st/4XQ
Firedrive: http://www.firedrive.com/file/4A1988FA91119CFB
Beta-1:
lpv-79-mako-port-beta1.zip mirrors
Google drive mirror: https://drive.google.com/file/d/0BxktHhMrAobWT2VHNmZYaXVsQlk/edit?usp=sharing
Copy mirror: https://copy.com/q7eqFD7uDwhR
Androidfilesharing mirror: http://fs1.androidfilesharing.com/0228524b0417b406
Mega mirror: https://mega.co.nz/#!6dk2hDbY!ERvSwDhx_fU83RFdwguFe1--zrsEvdLs3jl6jf0rZJ8
Romcook mirror: http://romcook.com/?d=53B9CAE216
Dev-host mirror: http://d-h.st/1hV
Cubbyusercontent: https://www.cubbyusercontent.com/pl/lpv-79-mako-port-beta1.zip/_4158d3ceb6fa4000b173d0dfa4ff502d (thanks to @bpear96)
Firedrive: http://www.firedrive.com/file/678CE0DC9726BC3D (thanks to @hardrockk)
reserve
Sent from my Nexus 4 using Tapatalk 2
sykopompos said:
Multirom guys, we are working on a smaller package for you
Click to expand...
Click to collapse
The past builds all work on MultiROM.
I flashed v21, 33 and 41 and they do give a notice that the ZIP is too big but they all worked.
I even flashed 33 and 41 on top of the previous one without clearing data or Dalvik and everything went smooth as silk.
Now, does this fix the Qualcomm timer thing that used to FC in previous builds?
Awesome! Can't wait to flash it. Thanks to all the devs who made this possible.
Sent from my Nexus 4 running the Android L Developer Preview
Hi,
@sykopompos...mate, i think it was a very good idea to pull out the gapps from the rom...
Well done!
Now, we need THIS featured in the portal.
THANK YOU!!!
ThatKawaiiGuy said:
Does this work with cwm? Or Philz?
Click to expand...
Click to collapse
Works fine with CWM for me.
respect!
Miles thanks boys!!! Great stuff here!!
Take site here,,,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
HARFIX3
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For I9300
Flash on your own risk!
Based on cyanogenmod smdk4412 source.
Hi. My name is Rafał, I'm from Poland.
I want to present You my harfix kernel for i9300.
Kernel is in beta state but working great on daily usage.
FEATURES
- ANYROM and AROMA installers (mostly by @psndna88)
- UBERTC GCC 7.0 toolchain
- 300HZ kernel tick (thanks @arter97)
- CPU OC/OV (100-2100MHz) (more then 1.6GHz is NOT recommended!!!)
- GPU OC/OV
- Boeffla-sound engine 1.6.7 (app in download section)
- governors: intelliactive, SmartassV2, lulzactiveq, adaptive, interactive, Darkness, Yankasusq, GoogyQ, conservative, ondemand, performance, pegasusq (lulzactiveq and ZZmoove is recommended)
- support F2FS (tested by @Schwester_Gabi)
- support NTFS (tested on 64GB USB drive by Kubix99)
- TCP - westwood
- SElinux - permissive
- O3 optimalizations
- TouchWake
- Increase USB charging rate to 900 from 475mAh
- 1 second to halt core instead of 4 sec.
- opitmalizations and tweaks
- other misc
More in future!
BUGS
You tell me
TESTED
Working:
- Official CM
- Temasek
- crdroid
- ResurrectionRemix M
- AICP
- CyanPop
- CM by MARKOX89
- Beanstalk
- Blisspop
Not working:
- Nameless rom
INSTRUCTION
EXT4
boot into TWRP
make a backup
flash kernel
reboot and wait until boot is finish
F2FS (thanks @Schwester_Gabi)
boot into TWRP
make a backup
wipe dalvik/ART cache
format /system with ext4 (if you chose f2fs the rom will automatical format it to ext4)
format /data with f2fs (this will erase Your all data!!)
format /cache with f2fs
flash rom (no reboot)
flash gapps (no reboot)
flash kernel
reboot and wait until boot is finish
CHANGELOG
Full changelog
1.1.1 03.07.16
- implement Harfix script v0.11
- remove HBC (will be back)
- back to -O3
- revert NVIDIA cpu relaxation (maybe will be back)
- disable dynamic fsync
- disable Zcache
- fix in HW
- default I/O set to ROW
- source update
1.1 27.06.16
- implement CPU topology
- add SmartassH3 gov
- rebuild, update interactive gov (thanks @arter97)
- Tweak lulzactive gov
- fixes in ondemand gov
- remove kexec -hardboot (will be back)
- enable dynamic fsync
- enable -Ofast
- enable CacheClean
- enable Zcache
- Lot of work in AROMA
- boost Random
- more agressive GPU
- I/O scheduler default is bfq
- bring inline with UBER opti
- fixes for GCC6 (Maybe useless because We use GCC7)
- fixes for selinux
- lot of opti and tweaks (mostly by @faux123 and @googy_anas)
- source update (nothing for i9300)
1.0 20.06.16
- fix 100MHz
- implement kexec -hardboot
Older:
0.8pre1 18.06.16
- NVIDIA cpu relaxation patch (thanks @MinL)
- disable gantle fair sleepers
- disable KSM
- tweak SmartassV2 gov
- add BFQ v7r8 I/O scheduler
- more agressive GPU
- Fix broken table logic (still can't change 100MHz voltage...)
- remove all my things from zram (LZ4, snappy, tweaks, opti)
- some boeffla tweaks for zram
- fix some bugs
- remove memory v3 script (may cause slower app opening and global speed) (will be back as v4 in next build)
- default governor set to PegasusQ
- source update (readd zram, add zsmalloc, LMK fixes and tweaks)
0.7 05.06.16
- start develop RafiQ governor (based on Yankasusq)
- implement memory v3 script (still WIP) (more smooth and better work on memory)
- implement GoogyQ governor (ported version of intellidemond)
- implement more I/O schedulers (fifo, vr)
- implement CPU-boost
- implement CPU-boost sys interface
- readd boeffla-sound (now works!)
- reduce Wi-Fi wakelock
- optimize do_csmu
- fix some leaks
- fixes in slub
- enable ARCH_POWER
- fixes in cpufreq
- higher led brightness
- 64-byte L1 cacheline
- fix deadlock in panic (if any)
- implement fast random number generator 1.1 (frandom)
- implement native exFAT support (samsung OSRC 1.2.4)
- implement LZ4 and snoppy compressions for zram (snappy in disabled)
- enable lz4 compression for zram
- implement timer slack controller
- enable cgroup timer slack
- fixes in cgroup
- enable NOSEC opti
- steal writing sem (performane fix)
- remove compressed copy from zram in-memory (more free zram to use)
- replace stock nr_running table with nvidia alternative in pegasusq
- a lot of modifications for zram (too many and too big to write here detailed changes)(mostly by @Yank555.lu)
- enable -O3 instead of -Ofast (more stable)
- disable auto name (again)
- fix: can't change i/o scheduler
- fix: can't change governor
- remove useless internet formats (size reduction)
- remove "+" in kernel version
- speeds up and optimalizations
- lot of fixes
- source update (updated modem_if, fixes and clean up code)
0.7pre2.1 15.05.16
Thanks a lot @FAFAŁ who found all there bugs
- fix reboots
- add cache refresher at sleep
- restore governors
- restore TCP
- restore NTFS support
0.7pre2 15.05.16
REBOOTING WHEN PHONE IS IN SLEEP
Thanks a lot @FAFAŁ who found all there bugs
- set kernel tick to 300HZ (thanks @arter97)
- Graphite optimalizations
- disable optimize for size
- disable generic spinlock
- back to gzip
- disable ntfs
- disable interactive and conservative govs
- camera fix
- remake config file
- remove almost all tcp
-------try fix nameless-------
- enable KSM
- enable profiling
------------------------------------
0.7pre1.2 14.05.2016 aka "let's fix again"
- wifi fix
- add checker at boot
- remove useless governors (powersave, userspace, adaptive)
0.7pre1.1 14.05.2016 aka "only fixing"
- GCC 7
- update ubertc to 21.04.16 version
- fix boot.img builder
- enable thermal
- disable thermal for exynos
- disable auto local version (in settings will be only version name, nick of builder and build pc name)
- disable quickboot (same problems at the moment)
- set 0.2-1.4 freqs when installing
0.7pre1 11.05.2016 aka "clean installation"
INSTALL UNDER 0.6.1
In settings will be still 0.6 as name
- add Harfix Bash Commander
- more effective GPU (~10%)
- add quick boot script (speed up boot time)
- enable touchwake as default
- make to aroma work faster
- delete unnecessary scripts and files in installers
- add material theme to aroma
- disable and delete all backups in aroma
- enable 4 device of zram, one with 200MB
- set swappiness to 80
- enable dynamic fsync
- delete thermal in config
- delete checks on boot to reduce boot time
- many many work in installers
- source update (fixes)
- reduction in size
- fixes
- new machine to build
APP
- CPU freqs
- visual updates for future settings
0.6.1 (27.04.16)
- fix audio
- fix governors
- disable compability check @psndna88)
0.6 (26.04.16)
- add aroma and anyrom installers (thanks @psndna88)
- rework SmartassV2 gov
- add Touchwake
- LZMA compression
- speed up screen off
- zram allow 4 devices
- fix touck wake incall
- Activate additional TCP congestion algorithms
(westwood, bic, cubic, htcp, hstcp, vegas, scalable, lp, veno, yeah, illinois)
- westwood now default
- fix .config files
- disable KSM
- 160MHz on L2 cache
- tweaks from i9300i 3.4 kernel
- small optimalizations
0.6pre2 (21.04.16)
- Power_ignore is now as default build-in
- Boeffla-sound is off as default (audio fix)
- SElinux is now permissive as default
- revert optimized CRC (battery drain fix)
- TCP is now westwood (faster network)(not working)
- enable 0fast optimalizations
- small fix for hotplug
- improve intall script
- ramdisk back to official CM
- update ramdisk to 20.04.16
- source update
0.6pre1-fix (17.04.16)
- remove LZ4 compression (will be back in future)
0.6pre1 (16.04.16)
DO NOT INSTALL - BOOTLOOP!!!
Look above
- add GPU OC/OV (use andromizer pro or something else that support mali gpu)
- LZ4 compression algorithm
- Boeffla-sound is enable by default (need SElinux set to permissive, see second post)
- Max charge levels set to 2600
- CRC32 optimized algorithm
- added darkness governor
- improve intall script
- Fixed: sometimes not charging at 900 on USB
- RAMDISK update to 6.5
0.6pre1-power_ignore have ignore unstable power and ignore margines as default
0.5 (09.04.16)
- add ZZmoove governor (very high recommend to use as default)
- RAMDISK changed from official CM to Temasek (6.0)
- tweaks MDNIE
- add Boeffla charge script
- source update
0.5pre2 (06.04.16)
- need less time to wake up screen
- NTFS support
- try to fix 100MHz overvolt (really fix will be in next pre)
- a lot of optimalizations
- a lot of tweaks
- global speed improvements
- small fixes
0.5pre1 (02.04.16, updated ramdisk on 04.04.16)
- Add OV CPU
- fixes logic table (now You can OC on all freq)
- add support for GCC 6 and 5
-small optimalization
0.4.1 (01.04.16)
- delete OV CPU
0.4 (31.03.16)
- add interface for GPU (will be deleted in future and added other interface)
- wait just 1 second for other CPU to halt
- add Boeffla-sound engine 1.6.7
- add OV CPU (buggy)
- increase USB charging rate to 900mAh
0.3.1 (30.03.16)
- small fixes
0.3 (29.03.16)
- add OC CPU up to 2.1GHz and UC to 100MHZ
0.2.1 (28.03.16)
- trying to fix very slow working (really fixed in 0.3.1)
0.2 (27.03.16)
- add intelliactive, lulzactiveq, SmartassV2 and active others governors
- disable cache synch when phone is in write protected
DOWNLOAD
xda
THANKS!
Like my project?
hit thanks!
Want to make this project more popular?
or want notification on site update?
follow this project!
XDA:DevDB Information
Harfix2, Kernel for the Samsung Galaxy S III I9300
Contributors
rafciowis1999
Source Code: https://github.com/wisniew/Harfix2_kernel_I9300
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: 0.8pre1
Created 2016-04-05
Last Updated 2016-06-1GPU
XDA:DevDB Information
Harfix2 elite kernel, Kernel for the Samsung Galaxy S III I9300
Contributors
rafciowis1999
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.1.1
Created 2016-06-20
Last Updated 2016-07-30
Notes:
Nothing for now
Plans:
Somewhere is the future
- ABB control - Adaptive Body Bias
- kexec -hardboot
To do
- add hotplug gov
- add lagfree goc
- add savagedzen gov
- add intelli_plug
- add profiles to Boeffla-sound (you can send me Your own)
- AOSP & Nameless support
Done
- implement Harfix2 0.1 script (memory, governors for now)
Harfix Bash Commander by Mieta & Jach00
This app allow control harfix2 kernel settings.
App is packed in kernel (0.7pre1 and above) so You don't need to download separately from here.
With this app You will be able to set all values what harfix kernel allow to set.
This is still Work In Progress state so if You find some bugs, tell me
Features:
- CPU freqs
- governor selection
- full TouchWake control
- full charge control
Plans:
too many to write them here
Download:
mediafire
In download , think for job ��
Édit : in test
lyamine said:
In download , think for job ��
Édit : in test
Click to expand...
Click to collapse
If You will see bugs, please tell me, I will try to fix.
and tell me Your system then i will mark to "tested" tab if working.
Harfix2 0.5pre2 is up on xda and mediafire!
changes:
- try to fix 100MHz overvolt (really fixed will be in next pre)
- a lot of optimalizations
- a lot of tweaks
- global speed improvements
- small fixes
- NTFS support (tested, working!)
- need less time to wake up screen
GRAB IT!
Hola
Since yesterday your kernel works very well
Harfix2-0.5pre1
I am under Temasek 5.0
Of that I install another Rom I will stay for you and will keep you informed
Good afternoon
Sorry for m'y inglish I hope is understandable
lyamine said:
Hola
Since yesterday your kernel works very well
Harfix2-0.5pre1
I am under Temasek 5.0
Of that I install another Rom I will stay for you and will keep you informed
Good afternoon
Sorry for m'y inglish I hope is understandable
Click to expand...
Click to collapse
Try update to 0.5pre2. Have many nice features.
Thanks for inform me, i marked in "working"
Please say I can ignore unstable power and power margin!
Kudos to the developer BTW.
sunny1234590 said:
Please say I can ignore unstable power and power margin!
Kudos to the developer BTW.
Click to expand...
Click to collapse
You can't :/ And i dont plan to add this in future becouse all kernel app dont support boeffla charge script.
Maybe when i will make my own app then i will add this.
if You will find app with support Boeffla charge script then i will add this in new pre.
You can install boeffla kernel and install apps from google play or xda and inform me when on someone will work.
sunny1234590 said:
Please say I can ignore unstable power and power margin!
Kudos to the developer BTW.
Click to expand...
Click to collapse
Or I can add this script and You will be able to edit settings via terminal.
rafciowis1999 said:
Or I can add this script and You will be able to edit settings via terminal.
Click to expand...
Click to collapse
Script sounds like a nice idea too.
sunny1234590 said:
Script sounds like a nice idea too.
Click to expand...
Click to collapse
OK, adding this is not too easy so give me some time for this.
Hello . I am not a specialist of the kernel or a developpers of rom but I'm sick of flash .. I flash my phone atleast once a day I like to try all Content Updates lurking on xda ,
I do not really say little di kernel is better than another because usually live kernels background stock very much for my personal use, for me when my phone does not consume more than 1% in airplane mode all night means I have a good kernel lol.
So if you can make a list of bugs or problems that can cause kernel , if I see I would tell you. That way I would learn with you on the kernels
Whenever I flash a rom before returning to my Buckup Temasek 5.0, I install your kernel and I would put screens shot to it more credible : p
For consomation battery . I use all the temp my phone . I could not tell you information for that
ResurrectionRemix-M-v5.6.5-20160324. It's OK
Again sorry for my English. it is the French translated by google translation
lyamine said:
Hello . I am not a specialist of the kernel or a developpers of rom but I'm sick of flash .. I flash my phone atleast once a day I like to try all Content Updates lurking on xda ,
I do not really say little di kernel is better than another because usually live kernels background stock very much for my personal use, for me when my phone does not consume more than 1% in airplane mode all night means I have a good kernel lol.
So if you can make a list of bugs or problems that can cause kernel , if I see I would tell you. That way I would learn with you on the kernels
Whenever I flash a rom before returning to my Buckup Temasek 5.0, I install your kernel and I would put screens shot to it more credible : p
For consomation battery . I use all the temp my phone . I could not tell you information for that
ResurrectionRemix-M-v5.6.5-20160324. It's OK
Again sorry for my English. it is the French translated by google translation
Click to expand...
Click to collapse
Thanks a lot. If You want help me more on this project You can test for me test builds (one will be release today).
Soon I will compile and upload on mediafire the test build.
I want information about this features what i will add (working, don't working, bugs, working perfect, working so slow, etc).
Stay tuned and soon i will make You my tester
Can You say what exactly version of kernel You are used in RR rom?
In next versions i will add name of kernel to "device information" in settings.
OK fine
Harfix2-0.5pre1 work in RR
Harfix2-0.5pre2 also work in RR
If you want me to try the two each time tell me!!
sunny1234590 said:
Script sounds like a nice idea too.
Click to expand...
Click to collapse
lyamine said:
OK fine
Harfix2-0.5pre1 work in RR
Harfix2-0.5pre2 also work in RR
If you want me to try the two each time tell me!!
Click to expand...
Click to collapse
Please test for me test1 build. Uploaded on mediafire. Now without script to control this, but please search for app that maybe will control this from google play or xda. When You find something, inform me. When not, inform me too so i will add script to edit charge amount via terminal.
Changelog in 3. post.
Good night
If i understand, you want me to test the latest build
If it's OK , i test it now in temasek 6.0 . it work
but please search for app that maybe will control this from google play or xda. When You find something, inform me. When not, inform me too so i will add script to edit charge amount via terminal.
Click to expand...
Click to collapse
I have not really understood what app and why ??!!!
Like this one for exemple !
https://play.google.com/store/apps/details?id=com.abmantis.galaxychargingcurrent.free
lyamine said:
If i understand, you want me to test the latest build
If it's OK , i test it now in temasek 6.0 . it work
I have not really understood what app and why ??!!!
Like this one for exemple !
https://play.google.com/store/apps/details?id=com.abmantis.galaxychargingcurrent.free
Click to expand...
Click to collapse
App which You can edit kernel settings like kernel adiuter, etc.
But i tested faux123 and kernel adiuter and We can't change charge numbers :/
I will add script to configurate this.
Thanks for try and for info.
You can stay with test1 becouse this is 0.5pre2 with one feature that work but We can't configure and with source update so phone can work faster or have opti on cpu.
And the test build is in "tests" folder
And "why?" becouse We will be able to change charge rate (how much mAh will go to Your phone while charging)
Thanks.
Sent from my GT-I9300 using XDA-Developers mobile app
OK i understend now .
I'll get tomorrow if I find another app and try the one you already try
Good night