Chrome only sees Cast when wired to Router - Google Chromecast

Hello everyone.
I've been trying to cast from my laptop but I don't see it (No Cast Devices found). I'm able to cast effortlessly from my Android device though.
Now, after poking here and there I tried connecting my laptop directly to the router and then Chrome detected my cast device.
Any idea of what it could be? This may be the wrong forum to post this but not even Google Support has figured out what's wrong.
Thanks!

I have the same problem, obviously I don't know how to fix it

Do you have a dual band router that is broadcasting 2.4 and 5 ghz signals? I've read of people having issues when the Chromecast uses 2.4 and your computer is trying to connect via the 5ghz network. Personally I have iPads and my Android phone connecting over 5ghz while my Chromecast is on 2.4 and don't have any problems. But perhaps it is a router issue. I use a WAP running DD-WRT, so it is better than most OEM routers out there.

sic0048 said:
Do you have a dual band router that is broadcasting 2.4 and 5 ghz signals? I've read of people having issues when the Chromecast uses 2.4 and your computer is trying to connect via the 5ghz network. Personally I have iPads and my Android phone connecting over 5ghz while my Chromecast is on 2.4 and don't have any problems. But perhaps it is a router issue. I use a WAP running DD-WRT, so it is better than most OEM routers out there.
Click to expand...
Click to collapse
There should not be an issue with connecting on different bands unless you segregate the 5ghz band on your router. Most routers are not setup to do that but if you have made changes, it is possible.

I checked the AP isolation thing before posting. So it wasnt that. I also flashed DD-WRT on it just to make sure. Same result.
We all on the same network/SSID.
Google cant figure out why Chrone only sees it only when wired im still waiting for them to come back with a workaround. If they do ill post it.

mogul420 said:
I checked the AP isolation thing before posting. So it wasnt that. I also flashed DD-WRT on it just to make sure. Same result.
We all on the same network/SSID.
Google cant figure out why Chrone only sees it only when wired im still waiting for them to come back with a workaround. If they do ill post it.
Click to expand...
Click to collapse
wild guess... if its not AP isolation maybe your wifi card has a firewall enabled and your Ethernet port doesn't?

Ashcunak said:
wild guess... if its not AP isolation maybe your wifi card has a firewall enabled and your Ethernet port doesn't?
Click to expand...
Click to collapse
checked. firewall is off.
weirder, the Chromecast app detects it, but my browser doesnt.
Code:

mogul420 said:
checked. firewall is off.
weirder, the Chromecast app detects it, but my browser doesnt.
Click to expand...
Click to collapse
I'm on the same boat with a "similar" problem. I have a Netgear N900 dual band router, but the issue persists while my main laptop (Win7) is connected via WiFi to either band (2.4GHz or 5.0GHz) or if I connect it directly to the router via Ethernet wire. Using the Chromecast app from the same laptop works without a hitch. I can also ping the Chromecast IP address without a problem. I have rebooted several times, uninstalled and re-installed Chrome and the Google Cast extension, but it makes no difference. I believe that the plugin is conflicting with "something" in this specific laptop. The issue is not with the LAN. All devices are on the same Network segment and respond to pings. The Google Cast extension works fine from two other laptops running Win7 with a similar setup, running the same version of the Chrome browser and Google Cast. I can also cast from my Android mobile devices (Nexus 7 & SGS3) using youtube. Suggestions anyone?
UPDATE:
The conflict was being caused by an active "virtual" network adapter. Specifically, the Leaf Network adapter that was installed with Netgear's ReadyShare Cloud. I guess this adapter works as a VPN to connect to the ReadyShare Cloud. I disabled this adapter and the Chromecast discovery worked. Apparently, the Chrome Cast extension is not smart enough to avoid virtual (VPN) adapters and link with the Primary (physical) wired/wireless adapter. At minimum, the extension should have an option to select the adapter to use. I don't user ReadyShare that frequently so having the adapter disabled does not bother me much.

The new update rolling out today is suppose to improve discovery so perhaps it will fix some of these issues.

bozzykid said:
The new update rolling out today is suppose to improve discovery so perhaps it will fix some of these issues.
Click to expand...
Click to collapse
Thanks for the heads up. Is this a firmware update for the dongle or an updated Chrome Cast extension? Regardless, is there a a place where I can read about this update or a way for me to manually download it?
Btw, I found the conflict with my setup... I have updated my previous post.

Got the Chromecast dongle "firmware" OTA update today. It went from release 12072 (shipped) to release 12840.. I don't think this is a "new" update that's supposed to be rolling out today.. If discovery was supposed to be improved with this release, it did not fix the issue with my ReadyShare Cloud virtual VPN adapters. Once I enable the Leaf Network adapter the device disappears from the Chrome Cast pull down. After reading about it a bit more, it appears that this 12840 OTA update patches the exploit used to get root. Oh well... does anyone know if there are any new features or what else is fixed with the 12840 release?

Related

Doesn't work over ethernet?

I have already set up the chromecast with my wireless network through my phone. It seems there is no way to get it to work with my wired PC that is on the same network. I am assuming that this is just the way it is and I'd like to confirm that.
jbaruch76 said:
I have already set up the chromecast with my wireless network through my phone. It seems there is no way to get it to work with my wired PC that is on the same network. I am assuming that this is just the way it is and I'd like to confirm that.
Click to expand...
Click to collapse
You need to be sending a wireless signal to the chromecast so no I don't think it will work on ethernet
My desktop works hardwired into my router, no problems. Just downloaded the extension for Chrome, and it worked.
Sent from my SGH-T889 using Tapatalk 2
Evo4gLI said:
My desktop works hardwired into my router, no problems. Just downloaded the extension for Chrome, and it worked.
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
well that is interesting. i have the extension installed, but it just says "no cast devices found." it works from phone, tablet and laptop. not sure what the problem could be.
jbaruch76 said:
well that is interesting. i have the extension installed, but it just says "no cast devices found." it works from phone, tablet and laptop. not sure what the problem could be.
Click to expand...
Click to collapse
When setting it up the first time it does a Wireless to wireless connection from your phone or Wifi Computer to the device. If you don't have Wifi on your computer you will need to use the phone for the initial setup. Once it is on the wireless network you can connect with any device connected to that network, wired or wireless. well that is once your router does not sepereate the wireless and wired clients
I'm having this same problem with my chromecast. Chrome cannot find the chromecast on the desktop; on Wifi or on ethernet. My laptops and all my android devices work without a problem though. Hopefully google hammers out some of these bugs
msm903 said:
When setting it up the first time it does a Wireless to wireless connection from your phone or Wifi Computer to the device. If you don't have Wifi on your computer you will need to use the phone for the initial setup. Once it is on the wireless network you can connect with any device connected to that network, wired or wireless. well that is once your router does not sepereate the wireless and wired clients
Click to expand...
Click to collapse
I hope this is how it'll work, as my network is similar. Router in the living room, with a cable going into a powerline Ethernet jack, emerging in my room where it connects to my desktop computer. So of course for initial setup I will need to use my phone or tablet because my desktop can't find the Chromecast if it's not connected to the router. But I'd certainly hope I can cast from desktop once the dongle has connected to the wi-fi.
Just to be sure - you're not running Windows XP are you? Because apparently XP is not compatible with Google Cast...
Router settings
Ensure you don't have your router settings on "isolate" (d'oi!)
Disable (or enable) any IGMP daemon.
Review your router settings - everything look sane? Any key words pop up?
uninstall your wireless network drivers and then scan for hardware changes; just let your computer reinstall the drivers. just got off the phone with the chrome ninjas and that fixed my problems.
I am also unable to see to see my Chromecast from wired PC's on my network. I tried disabling firewall, and checked all of my router settings. It's the stock Verizon router. I don't get it. It's a major negative that I can't see it from wired PC's.
foghelmut said:
I am also unable to see to see my Chromecast from wired PC's on my network. I tried disabling firewall, and checked all of my router settings. It's the stock Verizon router. I don't get it. It's a major negative that I can't see it from wired PC's.
Click to expand...
Click to collapse
I'm also on fios, so i'm thinking it's a problem with their router. I was going to try it later, but i found some information. If you login to the router then go to this site http://192.168.1.1/index.cgi?active_page=6059 and it give you some IGMP settings, which are hidden otherwise.
jbaruch76 said:
I'm also on fios, so i'm thinking it's a problem with their router. I was going to try it later, but i found some information. If you login to the router then go to this site http://192.168.1.1/index.cgi?active_page=6059 and it give you some IGMP settings, which are hidden otherwise.
Click to expand...
Click to collapse
That fixed it, thanks.
No trouble here with seeing Chromecast over Ethernet. Using a WRT54GL with Tomato installed.
My pc is connected to a airport express by Ethernet and I'm able to cast from it.
Sent from my HTC One using Tapatalk 4 Beta
solve?
solve?i have the problem with my HTC
jbaruch76 said:
I'm also on fios, so i'm thinking it's a problem with their router. I was going to try it later, but i found some information. If you login to the router then go to this site http://192.168.1.1/index.cgi?active_page=6059 and it give you some IGMP settings, which are hidden otherwise.
Click to expand...
Click to collapse
Disabling IGMP on my Verizon FIOS router resolved the issue, thanks.
jerseymonkey said:
Disabling IGMP on my Verizon FIOS router resolved the issue, thanks.
Click to expand...
Click to collapse
Is that the only change you made? Just changing IGMP Proxy from enabled to disabled? I did that, restarted router and pc but I still don't see the chromecast from the wired connection.
jbaruch76 said:
Is that the only change you made? Just changing IGMP Proxy from enabled to disabled? I did that, restarted router and pc but I still don't see the chromecast from the wired connection.
Click to expand...
Click to collapse
Make sure you are adding the extension to Chrome. I initially downloaded the app and it kept saying I needed to have WiFi turned on. Also make sure in addition to IGMP disabled that you have wireless isolation off.
msm903 said:
When setting it up the first time it does a Wireless to wireless connection from your phone or Wifi Computer to the device. If you don't have Wifi on your computer you will need to use the phone for the initial setup. Once it is on the wireless network you can connect with any device connected to that network, wired or wireless. well that is once your router does not sepereate the wireless and wired clients
Click to expand...
Click to collapse
exactly this
no ethernet
I have the same problem. Chromecast works fine with iPhone and Nexus7 on wifi network. But what I really want is to stream from the Chrome browser on my pc (as advertised!).
I installed the Chromecast extension, but it says no devices found.
I called Google Chromecast support directly, and two people there told me it couldn't be done. Unbelievable. I explained that my non-mobile desktop pc isn’t on a wireless network (why should it be?); it’s on a wired network (faster, more reliable), while all my wireless gadgets are on my wifi network (all from the same router). They say the pc must be on a wi-fi network (the same one as the Chromecast), not a wired network.
I'm hoping some smart guy here has a better answer.

Issues setting up chromecast using DLink router

hi, not sure if anyone has tried setting up chromecast using DLink router DIR 605L. I downloaded chrome cast setup app for windows 7, but it couldn't set it up successfully. I then tried doing a manual setup using browser via iphone and was able to add chromecast to wireless network. On the screen it shows that it is connected to the wireless network. However other devices are unable to find it. Youtube on iPhone cannot find it either. Nor does their setup app on Windows. Will try android device later today.
From what I can tell my router is only supports 2.4GHz so its not that. There probably is some router setting that is preventing it from working? Anyone has any ideas?
Thanks!
spike1013 said:
hi, not sure if anyone has tried setting up chromecast using DLink router DIR 605L. I downloaded chrome cast setup app for windows 7, but it couldn't set it up successfully. I then tried doing a manual setup using browser via iphone and was able to add chromecast to wireless network. On the screen it shows that it is connected to the wireless network. However other devices are unable to find it. Youtube on iPhone cannot find it either. Nor does their setup app on Windows. Will try android device later today.
From what I can tell my router is only supports 2.4GHz so its not that. There probably is some router setting that is preventing it from working? Anyone has any ideas?
Thanks!
Click to expand...
Click to collapse
I was finally able to get it to work by disabling "Wireless Enhance Mode" on the dlink router's console.
Trouble with Chromecast setup
spike1013 said:
I was finally able to get it to work by disabling "Wireless Enhance Mode" on the dlink router's console.
Click to expand...
Click to collapse
I just got my Chromecast and does not work with my Dlink router 605L. How do I disable "Wireless Enhance Mode" on my router? Yes, I am not a techie. Help will be greatly appreciated

chrome tab over wifi

So my PC is connected to my router by Ethernet cable. I can cast my chrome tabs and watch video play smooth with no issues. If i use my laptop that has similar specs as my pc and i connect via wifi, video will play very choppy on my tv. I have even tried it right next to my router to ensure the highest speed. A friend of mine is having the same issue with his computer which is also connected over wifi. Even at the lowest video settings its still choppy. Is this a known issue with trying to cast your tab over wifi or am I missing something?
herculese1 said:
So my PC is connected to my router by Ethernet cable. I can cast my chrome tabs and watch video play smooth with no issues. If i use my laptop that has similar specs as my pc and i connect via wifi, video will play very choppy on my tv. I have even tried it right next to my router to ensure the highest speed. A friend of mine is having the same issue with his computer which is also connected over wifi. Even at the lowest video settings its still choppy. Is this a known issue with trying to cast your tab over wifi or am I missing something?
Click to expand...
Click to collapse
I'm guess that if your router is not an "N" router (802.11n), it's probably having a hard time taking the stream from your laptop then sending it back to the Chromecast (I could be wrong). I have an N rounter and can stream wirelesly from my desktop to the chromecast with little to no stutter.
Also, make sure your chromecast has a good wifi signal. I had to use the included HDMI extender to give mine a little extra boost in signal.
Instead of telling us it's similar specs, what are the actual specs?
lebeauc said:
I'm guess that if your router is not an "N" router (802.11n), it's probably having a hard time taking the stream from your laptop then sending it back to the Chromecast (I could be wrong). I have an N rounter and can stream wirelesly from my desktop to the chromecast with little to no stutter.
Also, make sure your chromecast has a good wifi signal. I had to use the included HDMI extender to give mine a little extra boost in signal.
Click to expand...
Click to collapse
Yes my router is a "N". I have a Cisco E4200V2 which is a pretty good router.
Also, make sure your chromecast has a good wifi signal. I had to use the included HDMI extender to give mine a little extra boost in signal.[/QUOTE]
luega said:
Is your tab configuration a little low? Try another tab one more time,if still choppy,that is not issue of tab but TV.
Click to expand...
Click to collapse
My chromecast doesn't move and it has enough wifi signal to stream when using the ethernet connected computer so it should have the wifi signal. How would it be the tv? It works fine with my desktop.
Wireless connection will always be less reliable than a wired connection. I also doubt that your laptop has the same specs as your desktop in reality. Also, keep in mind that the tab/screen casting feature is still under development and not entirely reliable.
Roberek said:
Wireless connection will always be less reliable than a wired connection. I also doubt that your laptop has the same specs as your desktop in reality. Also, keep in mind that the tab/screen casting feature is still under development and not entirely reliable.
Click to expand...
Click to collapse
Yea i am hoping that when it comes out of beta it will be better over wifi. my pc (6 years old) is has a core 2 quad and it runs perfectly. My friend has a less than 1 year old mac that is quad core and has the issue over wifi. Theirs no way his 1 year old mac is not strong enough to support chromecast. I was ready to say "oh well it doesn't work over wifi smoothly" however it seems some people on here are claiming it should.
herculese1 said:
Yes my router is a "N". I have a Cisco E4200V2 which is a pretty good router.
Click to expand...
Click to collapse
Even with good N router, you still need to setup right
For example use only G and N mix better yet N only
Set router to use 40MHz instead of 20Mhz
Use WPA2 AES for security instead of something else
There are tons of optimization that you can do to the network.
Best way is to hack your router firmware and replace it with DDWrt
There is a large community full of people over at DDWrt that know their wireless stuff.
I have a D link router cheap but hack with DDWrt and I am streaming ok
Sent from my Nexus 7 using Tapatalk 4

Chromecast in hotels

The main thing that I was hoping to do with Chromecast was to use it in hotels while travelling. From what I'm reading, there are 2 major problems that would make this not a good option for hotels:
1. Sounds like there's not a way currently to accommodate wi-fi hotspots that require a web page login. This is the situation you find in most hotels.
2. The DNS is hard-coded to Google's DNS servers. This means that if you're travelling away from your home country and you need to use DNS proxies to reach restricted sources, (e.g., Netflix, BBC, Spotify), you're out of luck.
Those two restrictions make the Chromecast not very useful for my purposes. Root access would have been an approach to fix item #2, but now that's gone. So, I'm wondering if anybody knows of any development that's underway to deal with these issues? I took a quick look at the Chromecast API and I didn't see any way to manage the wi-fi connection or to change the DNS settings. I'm hoping some clever developer will figure out a way to deal with this.
Interesting, I was hoping to do the same thing. Some hotels don't require login but most do now. Has anyone tested it?
You could use a laptop and a micro router. I carry a mini tplink router to hotels to use. You can put it and a laptop on that router then stream from the browser to the chromecast. Not perfect but a workaround. Not sure if there is a way to stream directly from a phone or tablet yet.
Virtual Router should work, as (I believe) it supports multicast. Unfortunately, quite a few wifi cards will crash when using it, though. I have an Alfa AWUS036H that I use for... security testing... but that unfortunately can't sustain a connection with the software enabled.
I've used my rooted phone as wifi hotspot/router and then connect tablet or laptop to control chromecast. Unfortunately if a phone is in hotspot mode, chromecasting on same phone won't work so need to use second device to control chromecast.
Using a travel router would work, and maybe using a second Android phone as well, but all of that is defeating the purpose of using the Chromecast device. If I have to go through all of that, I might as well just use an HDMI dongle with my Android phone instead of the Chromecast.
The advantage that the Chromecast would have over phone+dongle is that the Chromecast is small and easy to attach to the TV and I wouldn't have to disconnect it when I was finished. That plus the fact that I would be able to use the phone as a remote control.
But if I've got to pack a travel router and set it up to run Chromecast, the convenience factor is gone. Also, unless there's a wired connection available, putting the 2nd phone or router in the picture would provide only half of the wi-fi bandwidth and slow the connection. Hotel wireless connections are usually pretty slow to begin with.
If somebody comes up with a solution to fix these issues on Chromecast, then I will definitely use it. Otherwise, I'll stick with the phone+hdmi dongle.
One advantage to using the CC is quality. The mhl adapters just don't have the quality and at a hotel with decent speed the router is not an issue. Besides you will not loose speed if you are plugging your router into the LAN.
woody1 said:
Using a travel router would work, and maybe using a second Android phone as well, but all of that is defeating the purpose of using the Chromecast device. If I have to go through all of that, I might as well just use an HDMI dongle with my Android phone instead of the Chromecast.
The advantage that the Chromecast would have over phone+dongle is that the Chromecast is small and easy to attach to the TV and I wouldn't have to disconnect it when I was finished. That plus the fact that I would be able to use the phone as a remote control.
But if I've got to pack a travel router and set it up to run Chromecast, the convenience factor is gone. Also, unless there's a wired connection available, putting the 2nd phone or router in the picture would provide only half of the wi-fi bandwidth and slow the connection. Hotel wireless connections are usually pretty slow to begin with.
If somebody comes up with a solution to fix these issues on Chromecast, then I will definitely use it. Otherwise, I'll stick with the phone+hdmi dongle.
Click to expand...
Click to collapse
life is better with r00t
willverduzco said:
Virtual Router I have an Alfa AWUS036H that I use for... security testing...
Click to expand...
Click to collapse
Riiiiiiiiight :silly:
willverduzco said:
[I have an Alfa AWUS036H that I use for... security testing...
Click to expand...
Click to collapse
lol i have one of those too, and we all know exactly why you have it
http://readwrite.com/2013/08/06/chromecast-hotel-travel-wi-fi-challenges#awesm=~ofCmrzdqug8DvB
http://www.connectify.me/hotspot-chromecast-best-friend/
yeah connectify gives my really inconsistent results. so far only netflix and youtube have worked. music hasn't at all. If I could figure out the cause I'd buy the pro version while its still on sale.
At one point I was planning to get a WL-330NUL mini router. Watch video here. (Supposedly the world's smallest) Given that it's a WiFi router... I believe it could work with the chromecast dongle using a WiFi connected smartphone/tablet/laptop. Looking at the video it appears that in standalone mode it can route using Ethernet on the WAN end and using a laptop it can route using WiFi in the WAN end. In the later scenario the laptop is used to authenticate with the hotel WiFi network and the router dongle appears to act as an AP. Not 100% sure of the second scenario, but it "appears" to be so. The router can be found online for the same price you paid for your chromecast. If I get a chance, before the end of the week, I might stop by B&H Photo-Video and pick one up.
Edit:
Here is another video that shows the features a bit more clearly
I really think that the Chromecast was designed as a way to turn your TV into a "smart" TV... not so much to be a portable device for media streaming. Even bringing it between three houses is annoying as you need to go through the full setup process each time you move between wireless networks since it only stores the most recent network.
Even if you could get it to connect to a hotel's WiFi I would not use it that way, since there's no option to restrict who on the network can cast content to the device.
raptir said:
Even if you could get it to connect to a hotel's WiFi I would not use it that way, since there's no option to restrict who on the network can cast content to the device.
Click to expand...
Click to collapse
In hotels all the WiFi connected devices are segregated. Try it. Connect two devices to "most if not all" hotel WiFi networks and the two devices can not connect to each other even while connecting from the same room. This is done for security purposes. With the set up I mentioned with the mini WiFi router any devices connecting to the wireless network created by the mini router needs to authenticate with the AP function of the router.
I use a tplink micro router. I plug into the ether net and it still requires that I log in. So I'm not sure if that will even work.
Life is better with root.
tamanaco said:
In hotels all the WiFi connected devices are segregated. Try it. Connect two devices to "most if not all" hotel WiFi networks and the two devices can not connect to each other even while connecting from the same room. This is done for security purposes. With the set up I mentioned with the mini WiFi router any devices connecting to the wireless network created by the mini router needs to authenticate with the AP function of the router.
Click to expand...
Click to collapse
Yeah, that would work. You're relying on the hotel having a wired connection in addition to wireless, which I do not see as often unless you're staying in business hotels.
Still, my post was more trying to point out that design decisions like only remembering one wireless hotspot make it seem like they did not intend this to be used for travelling.
raptir said:
Yeah, that would work. You're relying on the hotel having a wired connection in addition to wireless, which I do not see as often unless you're staying in business hotels.
Still, my post was more trying to point out that design decisions like only remembering one wireless hotspot make it seem like they did not intend this to be used for travelling.
Click to expand...
Click to collapse
Maybe I was not clear enough in my previous post... when "combined" with a laptop the mini router-laptop setup can act as WiFi LAN to WiFi WAN router. The "Laptop's" WiFi adapter links and authenticates with the hotel's WiFi AP and acts as a bridge to the USB connected mini WiFi router. The mini router then acts as a wireless AP for the wireless nodes in your room. Your chromecast and smartphone/tablet would then link and authenticate to the AP in the mini router and talk to each other as they would be in the same WiFi LAN segment. Both of them will then go out to the Internet using the WiFi connection of the laptop WiFi adapter. Take a look at the second video that I added at the end of my initial post.
tamanaco said:
Maybe I was not clear enough in my previous post... when "combined" with a laptop the mini router setup can act as WiFi LAN to WiFi WAN router. The "Laptop's" WiFi adapter links and authenticates with the hotel's WiFi AP and acts as a bridge to the USB connected mini WiFi router. The mini router then acts as a wireless AP for the wireless nodes in your room. Your chromecast and smartphone/tablet would then link and authenticate to the AP in the mini router and talk to each other as they would be in the same WiFi LAN segment. Both of them will then go out to the Internet using the WiFi connection of the laptop WiFi adapter. Take a look at the second video that I added at the end of my initial post.
Click to expand...
Click to collapse
Ah. I guess I'm just not seeing why you would go through all of that hassle when an HDMI cable would do the same thing. The Chromecast is great for convenience, when you remove that it just doesn't seem like a good solution to me.
raptir said:
Ah. I guess I'm just not seeing why you would go through all of that hassle when an HDMI cable would do the same thing. The Chromecast is great for convenience, when you remove that it just doesn't seem like a good solution to me.
Click to expand...
Click to collapse
It might not be a good solution for you, but for those of us that carry a laptop when we travel having two extra dongles would not be much of a hassle. Remember, even if the chromecast had its own browser to authenticate to the hotels WiFi and access the Internet your smartphone/tablet would not be able see it. You need to create your own wireless LAN segment in your hotel room for both devices to connect and a way for both to have access to the Internet via a router in order for the chromecast to work You need to replicate an environment similar to your home wireless network for the chromecast to work as designed.
Edit: Btw, I agree that having a laptop or tablet with separate HDMI port an HDMI cable is a better solution, but since this thread was about chromecast in hotels I was trying to keep the discussion relevant while exploring a "possible" solution.
tamanaco said:
It might not be a good solution for you, but for those of us that carry a laptop when we travel having two extra dongles would not be much of a hassle. Remember, even if the chromecast had its own browser to authenticate to the hotels WiFi and access the Internet your smartphone/tablet would not be able see it. You need to create your own wireless LAN segment in your hotel room for both devices to connect and a way for both to have access to the Internet via a router in order for the chromecast to work You need to replicate an environment similar to your home wireless network for the chromecast to work as designed.
Click to expand...
Click to collapse
I guess it just comes down to a matter of opinion. I do carry a laptop when I travel and I still think that plugging it into the TV with an HDMI cable would be easier than going through all that. The chromecast is less capable but more convenient than an HDMI cable, but if you've got a setup that causes the chromecast to be the less convenient option I just don't see why you'd go with it.
raptir said:
I guess it just comes down to a matter of opinion. I do carry a laptop when I travel and I still think that plugging it into the TV with an HDMI cable would be easier than going through all that. The chromecast is less capable but more convenient than an HDMI cable, but if you've got a setup that causes the chromecast to be the less convenient option I just don't see why you'd go with it.
Click to expand...
Click to collapse
I had updated my post before your reply. In essence we're in agreement about having an HDMI cable, but I believe that the possibility exist for making this work with just a smartphone with bluetooth and the chromecast dongle. My understanding is that the chromecast also has bluetooth capabilities. So a firmware update and basic browser in the chromecast can be use to authenticate with the hotel's WiFi network while the smartphone can act as a remote via Bluetooth. Just speculating here... but who knows.

[Q] Chromecast setup problems.

So, I'm setting up my new chromecast, but have have run into a problem. I'm able to find and connect my phone/PC to the chromecast itself, but it won't connect to my home (setup hangs at "connecting"). After a while I get an error message a la "can not establish contact with chromecast" (roughly translated from Norwegian). I've made sure uPnP and MAC address filtering both are disabled on my router.*I've already tried factory resetting the chromecast and moving closer to the router, to no help.
Worth mentioning is that my router is not exactly new (tilgin vood something), and is not to be found in the list of routers in the chromecast support section.*
Any tips?
olfyboy said:
So, I'm setting up my new chromecast, but have have run into a problem. I'm able to find and connect my phone/PC to the chromecast itself, but it won't connect to my home (setup hangs at "connecting"). After a while I get an error message a la "can not establish contact with chromecast" (roughly translated from Norwegian). I've made sure uPnP and MAC address filtering both are disabled on my router.*I've already tried factory resetting the chromecast and moving closer to the router, to no help.
Worth mentioning is that my router is not exactly new (tilgin vood something), and is not to be found in the list of routers in the chromecast support section.*
Any tips?
Click to expand...
Click to collapse
Try reducing the number of units that are connected to the wireless router and try connecting with the CCast again...Sometime on some cheaper routers too many devices connected will prevent new devices from connecting.
You can also try rebooting the router or try moving the CCast closer.
I do assume you have a Dual Band Wireless N router with the 2.4Ghz band enabled. CCast only connects to 2.4Ghz band.
Asphyx said:
Try reducing the number of units that are connected to the wireless router and try connecting with the CCast again...Sometime on some cheaper routers too many devices connected will prevent new devices from connecting.
You can also try rebooting the router or try moving the CCast closer.
I do assume you have a Dual Band Wireless N router with the 2.4Ghz band enabled. CCast only connects to 2.4Ghz band.
Click to expand...
Click to collapse
Normally there's no more than 2-3 devices connected to the router at the same time, so a lack of available connections to the router shouldn't be a problem. Both 2.4 and 5 Ghz bands are enabled on the router, so that shouldn't be a problem either. Moving the chromecast closer to the router didn't make a difference either. I'm really not sure what's the problem here...Thanks for the reply, though!
Is it simultaneous dual band? I mean does it run both bands on the same network or does it effectively run 2 networks? Simultaneous will work best, but if it isn't you need to make sure that the router allows both networks to speak to each other.

Categories

Resources