Uh... I think I have fixed the camcorder auto focus on .33 radio, here is the hybrid 84 and 33.
T-Mobile users, you should not need to do anything else from a fresh ROM install other than flashing hybrid and the EnableNexus4LTE.zip, voice should work fine now.
LTE working with camcorder autofocus
Let me know what else is fixed or what else is broken instead.
Releases:
Version 2
Requested versions:
Requested (Click here to see details)
Change log:
New modem radio-mako-m9615a-cefwmazm-2.0.1701.02:
- released based on new modem with "02" using "33" and the two versions of "27" cell components. they have been tested and works fine
V2:
- updated WiFi what believed to be WiFi Modules, seems to fix suspend_backoff so far
- added 33-54 as .54 seems to have better 5.0GHz WiFi handlding.
Original Release:
- jibber-jabber
Instructions:
1. Flash EnableNexus4LTE.zip to "enable" LTE in the build.prop
2. Flash one of these Hybrid Modem
3. Use these instructions or full wipe your ROM
Remarks:
- If you are experiencing GPS locking issues, make sure you are not downvolting (after putting your voltage back, it also takes about good 10-20 minutes before it is fully "normal" again"
- If you have a combination of the hybrid you would like me to build, give me a shout and I will try and create one and post it here.
There are some issues with 97 by the looks of it (with WiFi and slow boot)
Noticed the modem.img is smaller than usual, and it is actually missing quite a few items.
so I made a few varients:
W97C27MO97 - 0.97 based with 0.27 cell radio
W97C33O97 - 0.97 based with 0.33 cell radio
W97C33O97FULL - 0.33 based with updates from 0.97 keeping 0.33 cell radio
I am too scared to test right now, going back to work to tomorrow - need my phone working, who wants to be a guinea pig? Go HERE
Let me know how it goes
Requested hybrid modems are here:
http://www.mediafire.com/folder/tsriokg43m9s8/Requested
W54C24O84.zip contains:
WiFi: 0.54
Cell: 0.24
Other: 0.84
for some of the cell 0.27 ones that did not get specified whether it was the November or the March one (where you see "N" or "M" behind the 27 for November or March respectively), you will see variants like:
W54C27MO84.zip
WiFi: 0.54
Cell: 0.27 March 2013
Other: 0.84
W54C27NO84.zip
WiFi: 0.54
Cell: 0.27 November 2012
Other: 0.84
I'm on T-Mobile running 4.2.2 stock/rooted with LTE mods/hacks and it seems to be working well. Have in call audio. Not sure if this was meant for 4.3 also. I haven't tried that since the in call audio issue is the only thing keeping me from 4.3 at the moment.
d_phekt said:
I'm on T-Mobile running 4.2.2 stock/rooted with LTE mods/hacks and it seems to be working well. Have in call audio. Not sure if this was meant for 4.3 also. I haven't tried that since the in call audio issue is the only thing keeping me from 4.3 at the moment.
Click to expand...
Click to collapse
I thought people who were on t mobile using .33 has voice problems or something. So i thought that was the next thing to look for. Not just meant for 4.3, for all thanks!
morrislee said:
I thought people who were on t mobile using .33 has voice problems or something. So i thought that was the next thing to look for. Not just meant for 4.3, for all thanks!
Click to expand...
Click to collapse
Hoping someone running 4.3 will try this now and see if it works.
d_phekt said:
Hoping someone running 4.3 will try this now and see if it works.
Click to expand...
Click to collapse
I'm about to install it now. Will post results here
EDIT: Works as expected, LTE access, in call audio works, etc
Sent from my Nexus 4 using Tapatalk 2
morrislee said:
Uh... I think I have fixed the camcorder auto focus on .33 radio, here is the hybrid 84 and 33.
LTE working with camcorder autofocus
Let me know what else is fixed or what else is broken instead.
running it now, so far no issues. Use it at your own risk
Flashable ZIP
Click to expand...
Click to collapse
Would it be possible for you to create a hybrid .27/.84 radio? Thanks. I ask only because I get better battery life on .27.
Flippy125 said:
I'm about to install it now. Will post results here
EDIT: Works as expected, LTE access, in call audio works, etc
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Are you on the new bootloader as well?
Flippy125 said:
I'm about to install it now. Will post results here
EDIT: Works as expected, LTE access, in call audio works, etc
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Did you have to apply the old "in call audio" fix along with morrislee's hybrid radio, or just the radio itself?
morrislee said:
Uh... I think I have fixed the camcorder auto focus on .33 radio, here is the hybrid 84 and 33.
LTE working with camcorder autofocus
Let me know what else is fixed or what else is broken instead.
running it now, so far no issues. Use it at your own risk
Flashable ZIP
Click to expand...
Click to collapse
I have been staying away from. 33 cuz it broke my continuous focus on every rom. You sir are awesome cuz it now works! I'm in 4.2.2 btw. I'll report back if I see any wonkyness. Excellent work!
Sent from my Nexus 4 using Tapatalk 2
morrislee said:
Uh... I think I have fixed the camcorder auto focus on .33 radio, here is the hybrid 84 and 33.
LTE working with camcorder autofocus
Let me know what else is fixed or what else is broken instead.
running it now, so far no issues. Use it at your own risk
Flashable ZIP
Click to expand...
Click to collapse
Thats great
how did you make the hybrid radio
i was under the impression that radio files were closed source
i think what you did is great, just wondering how you did it?
Thx for hybrid
Constantly getting 4 bars of H/LTE
Sent from my Nexusâ´ using unlimited HSPA+/lte
morrislee said:
Uh... I think I have fixed the camcorder auto focus on .33 radio, here is the hybrid 84 and 33.
LTE working with camcorder autofocus
Let me know what else is fixed or what else is broken instead.
running it now, so far no issues. Use it at your own risk
Click to expand...
Click to collapse
Just flashed this and it's working great. I have a question though.... in settings / about phone, does it supposed to show as .33 or .84?
Mine shows as .33
Just wondering! Thank you for this mod.
Sent from my Nexus 4 using Tapatalk 2
morrislee said:
Uh... I think I have fixed the camcorder auto focus on .33 radio, here is the hybrid 84 and 33.
LTE working with camcorder autofocus
Let me know what else is fixed or what else is broken instead.
running it now, so far no issues. Use it at your own risk
Flashable ZIP
Click to expand...
Click to collapse
yes, it works
no LAC though
would you mind sharing your process?
I thought modem had to be signed?
@morrislee I can't thank you enough for this. Good stuff bro, just flashed and confirmed working LTE with audio. Made my day.
Sent from my Nexus 4 using xda app-developers app
VidMan said:
Would it be possible for you to create a hybrid .27/.84 radio? Thanks. I ask only because I get better battery life on .27.
Click to expand...
Click to collapse
here you go sir (not tested, good luck!)
pchtc said:
Thats great
how did you make the hybrid radio
i was under the impression that radio files were closed source
i think what you did is great, just wondering how you did it?
Click to expand...
Click to collapse
It is closed source lol, I sat there mounting img (it is really just a partition in a file) swapping each files and flashing each build until I got LTE working and create a new one to only swap that one. As far as I can tell, using this method kept the modem, but the power management from 84, that is probably why autofocus works? XD
BRKotucs said:
Just flashed this and it's working great. I have a question though.... in settings / about phone, does it supposed to show as .33 or .84?
Mine shows as .33
Just wondering! Thank you for this mod.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
suppose to show .33, .33 is the core, the remainder are all .84's components
dcd1182 said:
yes, it works
no LAC though
would you mind sharing your process?
I thought modem had to be signed?
Click to expand...
Click to collapse
It was broken since beginning of time cant fix it just yet - not a huge deal, look at here for location fix by GPS.
I am looking for a fix for it though for the perfect modem, mixing and matching from e973 might be a start. This will take time, and I am going to be very busy the next month.
happy modding guys =D
morrisle
morrislee said:
It is closed source lol, I sat there mounting img (it is really just a partition in a file) swapping each files and flashing each build until I got LTE working and create a new one to only swap that one. As far as I can tell, using this method kept the modem, but the power management from 84, that is probably why autofocus works? XD
suppose to show .33, .33 is the core, the remainder are all .84's components
Click to expand...
Click to collapse
Are you saying that the power management from .84 is included in the hybrid?
lazer155 said:
Are you saying that the power management from .84 is included in the hybrid?
Click to expand...
Click to collapse
From my research and interpretations, yes sir
morrislee said:
here you go sir (not tested, good luck!)
Click to expand...
Click to collapse
I can confirm that it works! Thanks a lot.
morrislee said:
suppose to show .33, .33 is the core, the remainder are all .84's components
Click to expand...
Click to collapse
Thanks!
Sent from my Nexus 4 using Tapatalk 2
Related
Latest Cyanogenmod nightly number 97 (10/3/2010) has the new ril baked in. No need to use this patch if you are running it or a newer one.
Back Story
Long story short, the Chinese group Miui mananged to get / build (not really sure) a new Radio Interface Layer for our HTC devices... I pulled this file out of the Nexus one build that they released and it works perfectly. Link to the Nexus1 version
Over in the Nexus one forum a few people have questioned where this Chinese group got some of the files they're using, as they're really bleeding edge (at least thats what they say in the N1 forum). This newer / different RIL file seems to fix the issues we're facing with random phantom reboots while wifi is on. Also included in this is the issue where the signal bars show an "x" for a second or two after connecting to a wifi hotspot. Also fixed are issues where the radio signal drops before / after receiving a call that plagues AOSP builds (ruby and CM for sure).
Cyanogenmod 6.xx
This works on the 6.xx versions as well as the Nightlies.
NOTICE: As of Oct 2nd this has been "committed" so I assume the nightly that comes out this evening will have the fix built in. Check it out
Latest nightly number 97 has the new ril baked in. No need to use this patch.
Ruby 1.1.1
This works for Ruby. If you are wanting the BT Media Streaming audio fix as well, please see this thread. They are two separate installs.
Shadowrom
It has been confirmed that this also works for Shadowrom.
Bugs
I honestly don't know of any yet... but that doesn't mean there aren't any. Only a handful of us have been testing this thing out on the inc so far. Figured more people might want to check it out.
Credit
I take no credit for the fix. The Miui group built/got it(not sure which), I simply happened to be playing around with some files and noticed the side effects. Thanks again to Jermaine for letting me know more about the rom (and the fact that they weren't plagued by our reboot issues) in the first place so I could start digging...
Of course thanks go out to the entire ruby and cyanogenmod teams, without them we wouldn't have these fun roms. Lastly, IncredibleDoes for doing the Inc port of miui that opened our eyes to it.
Installation
- Download the file and place it on your SD card.
- Load up Rom Manager and hit "Install rom from SD card," select the file.
- I'd probably make a nandroid backup if you haven't recently just in case... no wipe has been needed.
Disclaimer
If this messes up your phone, not my fault Was tested by about 30 people so far, and no issues that we've seen. Please make a nandoid backup just in case.
THIS IS FOR AOSP roms listed above ONLY. Please do NOT install it on any sense based roms.
Downloads
see below
Latest Cyanogenmod nightly number 97 (10/3/2010) has the new ril baked in. No need to use this patch if you are running it or a newer nightly .
dnoyeb said:
Also included in this is the issue where the signal bars show an "x" for a second or two after connecting to a wifi hotspot.
Click to expand...
Click to collapse
Isn't this just cosmetic? Or because the phone is switching from 3G to 1x? I've never dropped a call while toggling WiFi on...
larsrya8 said:
Isn't this just cosmetic? Or because the phone is switching from 3G to 1x? I've never dropped a call while toggling WiFi on...
Click to expand...
Click to collapse
Not that I can tell... so far the mere fact that the wifi isn't causing reboots anymore is the main reason I'm putting this out there...
anything else is just gravy.
dnoyeb said:
Not that I can tell... so far the mere fact that the wifi isn't causing reboots anymore is the main reason I'm putting this out there...
anything else is just gravy.
Click to expand...
Click to collapse
Fixing the WiFi reboots would be great. Though, strangely, I'm at 110 hours uptime with the WiFi on... I guess it'll take a while to verify this fix works.
larsrya8 said:
Fixing the WiFi reboots would be great. Though, strangely, I'm at 110 hours uptime with the WiFi on... I guess it'll take a while to verify this fix works.
Click to expand...
Click to collapse
sounds good. in all reality the one person who can really verify is koush... sending him the idea as well...
(wish I could make it 110 hours! hah... at my office i'm lucky if I get more than 3 hours) so today will be a major test of it. so far so good.
dnoyeb said:
sounds good. in all reality the one person who can really verify is koush... sending him the idea as well...
(wish I could make it 110 hours! hah... at my office i'm lucky if I get more than 3 hours) so today will be a major test of it. so far so good.
Click to expand...
Click to collapse
Good job! I hope that solves it since we've determined the kernels don't.
jermaine151 said:
Good job! I hope that solves it since we've determined the kernels don't.
Click to expand...
Click to collapse
all thanks to you bud will update credits with backstory if all goes well.
dnoyeb said:
all thanks to you bud will update credits with backstory if all goes well.
Click to expand...
Click to collapse
Totally thanks to you! I'm just glad that you were persistent on resolving it.
Please please let Koush know about this, too. Nice work man.
Asterdroid said:
Please please let Koush know about this, too. Nice work man.
Click to expand...
Click to collapse
if it works, sure going to send out the links shortly... testing the installer on another phone really quick.
YGPM.
I'll guinea pig my phone for a few days if it means getting CM running w/o locks or reboots.
I'll try out the ruby one!
Sent from my ADR6300 using XDA App
I'd be more than happy to help test either CM or Ruby (Ruby preferred). Just PM me the info!
Installed the fix on Ruby 1.1.1. Running stock Ruby Kernal (This kernal has been the best overall performance Kernal for me on Ruby). Will report back results
I've installed the file you sent me... and holy crap. It seems to work. Really hope this does it or at least puts koush in the right direction.
Sent from my ADR6300 using XDA App
ncwildcat said:
Installed the fix on Ruby 1.1.1. Running stock Ruby Kernal (This kernal has been the best overall performance Kernal for me on Ruby). Will report back results
Click to expand...
Click to collapse
I am very interested to see the results on the stock one... I forget, does the stock kernel have working wifi tether?
I am packing up a BT-Fix for Ruby right now but will keep it separate, to not complicate things.
camalus said:
I've installed the file you sent me... and holy crap. It seems to work. Really hope this does it or at least puts koush in the right direction.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
You and me both man... if most testers go a good 24 hours with no wifi caused reboots / drops etc, maybe he'll look at it...
Keep us informed of the progress! thanks for testing.
Just in case you are curious.. I'm running koush test 2 kernel. No setcpu installed.
Sent from my ADR6300 using XDA App
I have had good luck with wifi teather on the stock kernal...didn't work on any of the king kernals.
Sent from my personal space
I really dont believe its the wifi. Its when the 3g turns on or off when the issues happen, which is when you leave or enter a wifi area. I turned 3g off and didnt use it for 2 days with wifi on the whole time with no reboots. I've have the lockup with just 3g on as others have noted. Also I believe that the lockups and the reboots are a separate issue. I have yet to see where any dev said it was the wifi directly, and with the known issues of 3g+froyo it points to 3g not wifi.
So, if you turn wifi off and are in a good 3g area then you will unlikely lose 3g much if at all, but if you have signal issues then the reboots still exist.
If we are going to find out what the problem is we need to setup test groups.
1 - no wifi, no 3g
2 - no wifi, 3g on
3 - wifi on, no 3g
4 - wifi on, 3g on
Make sure everyone is using the same rom/radio.
nfiniti9 said:
So, if you turn wifi off and are in a good 3g area then you will unlikely lose 3g much if at all, but if you have signal issues then the reboots still exist.
Click to expand...
Click to collapse
That's a possibility, but I think I'm in a good 3G area, and the majority of my movements are in a pretty small geographic area. I'll get reboots when my phone is just sitting on a table or in my pocket though in an area w/ strong signal.
Make sure everyone is using the same rom/radio.
Click to expand...
Click to collapse
I think what we'd really need is for the testers to check all 4 combinations. There's too much geographic variance to have a bunch of different people testing these combinations unless some lived very close to each other.
Created a CWM zip with the Bell OTA GB radio and successfully flashed it.
if you use this feel free to let me know if it works for you.
Thanks to NFHimself as I believe it was his leaked radio zip (correct me if I am wrong as I can't find the thread I got it from) that I simply updated.
http://www.4shared.com/file/Jcy5-1du/Bell_OTA_GB_Radio.html
Just installed it over Alien ROM. Download speeds are comparable to .30P, upload speeds are a bit better. One noticeable improvement though is that it takes less time to achieve a data connection when the phone wakes up.
can this be flashed onto AT&T?
kshiuan said:
can this be flashed onto AT&T?
Click to expand...
Click to collapse
You can, but if you're on the ATT network and have an ATT phone, then you should probably stick with the ATT radio.
Why is that?
Sent using my Home Base Atrix 4G.
kshiuan said:
Why is that?
Sent using my Home Base Atrix 4G.
Click to expand...
Click to collapse
I believe it's because the ATT baseband version has been optimized to work with the ATT towers.
For sweets and giggles I flashed this on my phone running CM7 Pre Beta 4 on AT&T and I am getting .5mbps faster download and upload all around.
*NOTE*
Seeing as how we all live in different areas of the world everyone's results are going to differ tremendously. What works for me might be sweeter for someone else. So this is just a little word to the wise.
I am NOT telling anyone to flash this on their phone. I am simply saying IF you decide to flash it, you'll most likely get way different results than I did.
It's not my fault nor the guy who made this thread if you sweet your sweet up
could i test on International with Cm7 Pb4?
now i'm running 1.00
on cyano signal in italy with h3g. i use at&t version no international. For me reception is worse to previous version. Internet is better
pagapervedere said:
could i test on International with Cm7 Pb4?
now i'm running 1.00
Click to expand...
Click to collapse
I am using a bell atrix with cm7 on it right now.
I did have speed trouble on first boot, second boot took care of that. - food for thought.
Glad its working for you.
y2whisper said:
Created a CWM zip with the Bell OTA GB radio and successfully flashed it.
if you use this feel free to let me know if it works for you.
Thanks to NFHimself as I believe it was his leaked radio zip (correct me if I am wrong as I can't find the thread I got it from) that I simply updated.
http://www.4shared.com/file/Jcy5-1du/Bell_OTA_GB_Radio.html
Click to expand...
Click to collapse
Is it actually different from his leaked version though?
yes the leaked version was 1.77.30s.qn
y2whisper said:
I am using a bell atrix with cm7 on it right now.
I did have speed trouble on first boot, second boot took care of that. - food for thought.
Glad its working for you.
Click to expand...
Click to collapse
Tested today....
jump from 3g to Hspa many time...
Cm7 on Europe Atrix...
Now this night i'm testing1,97...flashed with sbf...
this is running perfectly for me... my phone used to run really hot, surprisingly since ive flashed this its been running comparatively cooler... havnt really measured the d/l speeds but it seems a bit faster. all is well
Same here, I'm on ATT... seems to be better reception and everything including faster speeds. I recommended this now for USA ATT... (Atlanta GA Location)
anandsamuel said:
this is running perfectly for me... my phone used to run really hot, surprisingly since ive flashed this its been running comparatively cooler... havnt really measured the d/l speeds but it seems a bit faster. all is well
Click to expand...
Click to collapse
Sent from my MB860 using XDA App
I haven't done extensive testing but when I first flashed this the reception at home was MUCH improved. Never ran any speed tests to get numbers.
Here at work where signal is quite poor due to radio equipment my signal is also quite a lot better. Speed tests were great from a relatively dead zone in the office too. Awesome!
I'm using a Bell Atrix on the Rogers network.
bongd said:
I haven't done extensive testing but when I first flashed this the reception at home was MUCH improved. Never ran any speed tests to get numbers.
Here at work where signal is quite poor due to radio equipment my signal is also quite a lot better. Speed tests were great from a relatively dead zone in the office too. Awesome!
I'm using a Bell Atrix on the Rogers network.
Click to expand...
Click to collapse
2 questions, how is your phone's temperature? Specially when playing games or been using the phone for long time or multi tasking?
and if I didn't want to use it after flashing it how can I undo it?
Thx
creativedevil said:
2 questions, how is your phone's temperature? Specially when playing games or been using the phone for long time or multi tasking?
and if I didn't want to use it after flashing it how can I undo it?
Thx
Click to expand...
Click to collapse
The temperature's been fine but I haven't been paying a close eye. If it were anything out of the ordinary I'd pick up on it though.
You can flash a different radio if this isn't working out. N_01.11.30P is fantastic as well, but I think this may edge it out. If I'm not mistaken it sounds like the voice quality of calls have improved by quite a bit.
bongd said:
The temperature's been fine but I haven't been paying a close eye. If it were anything out of the ordinary I'd pick up on it though.
You can flash a different radio if this isn't working out. N_01.11.30P is fantastic as well, but I think this may edge it out. If I'm not mistaken it sounds like the voice quality of calls have improved by quite a bit.
Click to expand...
Click to collapse
I just flashed this radio after i posted my question. Reception was never an issue for me anyways, so don't know if it has changed. I played HD game for a bit and same result as others, my phone's temp went up to 40 C in less than 10 minutes. I have not seen any radio which can fix this stupid heating problem. With Stock Froyo, never had to worry about temperature issue at all, ever since I have flashed different ROMS and kernels and radios, I haven't found any which is as good as the stock bell froyo.
Voice quality seems clearer and download speed seems a lil higher though.
I just got off the phone with my wife and this call quality has definite, definitely improved.
I talked to her at work in a relative dead zone and the call was quite clear as well. Thanks for sharing this radio!!
http://aokp.co/release-jb-mr1-build-4/
Anyone check it out and see how it compares to Hashcode's CM10.1 build? I'm assuming it suffers from similar bugs such as no hwcomposer
Edit: I now see that Hashcode is actually an AOKP maintainer now, so chances are high that this is very similar to his CM10.1, save for the AOKP features
Waiting for more feedback before I check it out.
I've been running it for about a week. I'm really enjoying it. It's very fast, light on battery, and stable. As long as you use a third party app for camera/camcorder, everything works. I would definitely recommend trying this out.
Sent from my XT875 using Tapatalk 2
Once the hw composer works I will try it again. Graphical tearing ruins all of it.
Sent from my XT875 using Tapatalk 2
HDMI? I know webtop doesn't work properly on any non-Blur ROM, but can you at least do mirroring?
fantastic! Checking it out now.
Does this still have the bluetooth issues?
FYI use this link to get the latest build: http://aokp.co/supported-devices/?id=60&device=targa
They are at build 5 and I'm about to try it.
SCFirefighter said:
FYI use this link to get the latest build: http://aokp.co/supported-devices/?id=60&device=targa
They are at build 5 and I'm about to try it.
Click to expand...
Click to collapse
I just flashed this ROM and WOW is it clean. BEST JB build yet! I was using Icarus but this is way ahead of that. Full Google Now, lock screen widgets (still don't know how to add them yet ) but very clean AOKP build. I'm impressed.
neo1738 said:
I just flashed this ROM and WOW is it clean. BEST JB build yet! I was using Icarus but this is way ahead of that. Full Google Now, lock screen widgets (still don't know how to add them yet ) but very clean AOKP build. I'm impressed.
Click to expand...
Click to collapse
Better than Icarus HD 1.7.x? Because I'm still on Icarus HD 1.5 and was looking to update but I might forego the entire process and just start new with AOKP.
Tada10 said:
Once the hw composer works I will try it again. Graphical tearing ruins all of it.
Sent from my XT875 using Tapatalk 2
Click to expand...
Click to collapse
I have graphical tearing and bluetooth problems. Also stock JB camera is no good.
Windiddy said:
I have graphical tearing and bluetooth problems. Also stock JB camera is no good.
Click to expand...
Click to collapse
Funny I don't have problems with either of those. Yes camera is a known issue with all JB Kexec roms. You need Camera FX or something of the like.
To previous poster yes I find this way ahead of Icarus HD in terms of JB speed and features. Only thing missing from Icarus is stock camera and if you like the dock apps and smart actions you don't have those stock have to get them yourself.
neo1738 said:
Funny I don't have problems with either of those. Yes camera is a known issue with all JB Kexec roms. You need Camera FX or something of the like.
To previous poster yes I find this way ahead of Icarus HD in terms of JB speed and features. Only thing missing from Icarus is stock camera and if you like the dock apps and smart actions you don't have those stock have to get them yourself.
Click to expand...
Click to collapse
Try using logmein ignition and you will see that graphical tearing and lack of hardware video support sucks. Your video looks like its in Atari mode. Those things matter to me anyways. Icarus works best.
Sent from my DROID BIONIC using Tapatalk 2
Anybody else having MMS issues? Was working fine in Build 4 but no longer works in Build 5... changing the CDMA subscription back and forth doesn't appear to work.
Also, does anyone know which CDMA subscription we're SUPPOSED to be on? It seems to work fine on both except with no MMS on either. Very strange...
beowulfey said:
Anybody else having MMS issues? Was working fine in Build 4 but no longer works in Build 5... changing the CDMA subscription back and forth doesn't appear to work.
Also, does anyone know which CDMA subscription we're SUPPOSED to be on? It seems to work fine on both except with no MMS on either. Very strange...
Click to expand...
Click to collapse
stock for the rom seems to be the one with all, cdma, lte, gsm, etc. I have not had these issues at all on rev 5. Try "reinstalling" the rev 5 in bootstrap over the current one, that fixed an issue I had with data on the radio for a couple hours.
New build released!
I just installed MR1 build 6 and the stock camera works out of the box. Good start to a new ROM release!!
NOTE: You _NEED_ to install it in rom-slot2. It will tell you that after you start flashing, so when you're too late to cancel it.
http://aokp.co/release-jb-mr1-build-6/
SCFirefighter said:
New build released!
I just installed MR1 build 6 and the stock camera works out of the box. Good start to a new ROM release!!
NOTE: You _NEED_ to install it in rom-slot2. It will tell you that after you start flashing, so when you're too late to cancel it.
http://aokp.co/release-jb-mr1-build-6/
Click to expand...
Click to collapse
yeah that is weird to me
Anyone know how to get Motorola Smart Actions to work on this ROM? Also the Stock Cardock app would be nice as well. Let me know if it's as simple as just putting it in system/apps and installing. Thanks!
If it doesn't work get Tasker. I know it's pay ware but it's only $2 down from $7. It beats the Crap out of the smart actions tool.
-- Sent from my DROID BIONIC on the KEXEC() enabled latest Linux kernel compiled for Key Lime Pie, with backwards compatibility.
neo1738 said:
Anyone know how to get Motorola Smart Actions to work on this ROM? Also the Stock Cardock app would be nice as well. Let me know if it's as simple as just putting it in system/apps and installing. Thanks!
Click to expand...
Click to collapse
Get Car Home Ultra for your car dock. It's light years better than Motorola's cardock.
Has anyone tried the Pacman rom out yet?
Sent from my DROID BIONIC using Tapatalk 2
Since no one has made a thread for CM11 on the Sprint GS4, I just made one.
Discuss
Looked around for any feedback regarding CM on this phone, specifically the nightly cm 11. I'm full stock, but I heard that KK CM is pretty stable and great. With all this funding lately it's not looking bad. I don't have many complaints for stock though, so far for me it's been rock solid.
How are the last few CM11 night lies doing? I am on something else now more or less because I have not seen a official thread so though it might not be completely ready yet
Sent from my SPH-L720 using Tapatalk
xchampx13 said:
How are the last few CM11 night lies doing? I am on something else now more or less because I have not seen a official thread so though it might not be completely ready yet
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
For me everything is flawless except Bluetooth. When I switch it on and it connects to my car, Bluetooth on the phone crashes instantly and then it just connects/disconnects over and over again. No word on if/when this will be fixed from what I read on their changelog page.
Lock screen weather is still not working, but that's minor.
Bluetooth still broken for me. This is the longest I've seen an official CM build be this shoddy.
agentfazexx said:
Bluetooth still broken for me. This is the longest I've seen an official CM build be this shoddy.
Click to expand...
Click to collapse
I have the latest nightly running 12/27 and I've used Bluetooth in my car today and it worked fine.
Only problems I've had? Battery life has been pretty crappy.. Also the camera has FC once or twice. But only when the camera is left running and the screen is locked and unlocked. Also I want my slow motion camera back
RatBurger08 said:
Only problems I've had? Battery life has been pretty crappy.. Also the camera has FC once or twice. But only when the camera is left running and the screen is locked and unlocked. Also I want my slow motion camera back
Click to expand...
Click to collapse
Battery life has been great for me! I've been using KT latest kernel for 4.4 and used some of his settings and pulled of 21 hrs yesterday with 3+ hrs of screen on time.
And regarding the camera....it's crap! I take photos with it and it shows clear and focused before shot and after, it's blurry around edges
You can, however, use a third party camera app and pics come out fine.
kevinsturf said:
Battery life has been great for me! I've been using KT latest kernel for 4.4 and used some of his settings and pulled of 21 hrs yesterday with 3+ hrs of screen on time.
And regarding the camera....it's crap! I take photos with it and it shows clear and focused before shot and after, it's blurry around edges
You can, however, use a third party camera app and pics come out fine.
Click to expand...
Click to collapse
Focal is a good camera app
agentfazexx said:
Bluetooth still broken for me. This is the longest I've seen an official CM build be this shoddy.
Click to expand...
Click to collapse
Have you submitted the bug to their JIRA? Have you written your own code to fix it? If you're not gonna do anything to help solve the problem, quit complaining about it.
kiekan said:
Have you submitted the bug to their JIRA? Have you written your own code to fix it? If you're not gonna do anything to help solve the problem, quit complaining about it.
Click to expand...
Click to collapse
I'm not a programmer, so no I haven't coded a fix but you're the first person to actually give me a place to submit a bug report to.
No need to be aggressive.
I don't use blue tooth much been using it the latest five nightlies. Been working, fine connects, been talking to the wife on the way to work. So might be an issue with you dash player. Maybe delete all data from blue tooth settings and reconnect
sent from Isaac's GS4
On Carbon KitKat for Sprint S4. Best Kitkat Rom out IMO.
King_AKW said:
On Carbon KitKat for Sprint S4. Best Kitkat Rom out IMO.
Click to expand...
Click to collapse
can we get a link for carbon rom plz thx
Here you go
http://forum.xda-developers.com/showthread.php?p=48910277
Sent from my SPH-L720 using XDA Premium 4 mobile app
Does carbon rom have working ir blaster
sent from Isaac's GS4
isaac2k10 said:
Does carbon rom have working ir blaster
sent from Isaac's GS4
Click to expand...
Click to collapse
This thread is for the official CM11 discussion.
On that note, Bluetooth is still broken on 1/5. I submitted a bug report. Hopefully they respond.
Is there anyway to turn off the animation when my screen turns off?
Sent from my SPH-L720 using XDA Premium 4 mobile app
agentfazexx said:
This thread is for the official CM11 discussion.
On that note, Bluetooth is still broken on 1/5. I submitted a bug report. Hopefully they respond.
Click to expand...
Click to collapse
Bluetooth works fine for me
isaac2k10 said:
Bluetooth works fine for me
Click to expand...
Click to collapse
In your car? When did you flash CM11 first?
Hello Everyone. It is with great pleasure that i bring you the first unofficial build of SlimLP for the 2nd gen Moto X. I will update this OP later after work for now enjoy the build.
Find build here:
https://s.basketbuild.com/devs/grondinm/victara
Device and kernel trees:
https://github.com/grondinm/android_device_motorola_victara/tree/lp5.0
https://github.com/grondinm/android_kernel_motorola_msm8974/tree/lp5.0
Thanx go to @crpalmer for getting this device to boot and the entire slimteam for the great rom.
Find more info on slim at slimroms.net
Enjoy
i'll take this
Thanks man,i'm trying asap!
was just working on it!!!nevermind!Cheers buddy!!!
Thanks
Sent from my XT1097 using Tapatalk
Is there anything here NOT working?
stevew84 said:
Is there anything here NOT working?
Click to expand...
Click to collapse
only thing really not working is WiFi Hotspot
Very thanks.....:thumbup::thumbup:
Enviado desde mi victara usando Tapatalk 2
Grondinm said:
only thing really not working is WiFi Hotspot
Click to expand...
Click to collapse
Only asking because I saw the camera wasn't working on the Crdroid build.
Grondinm said:
only thing really not working is WiFi Hotspot
Click to expand...
Click to collapse
So ambient screen should also work?;o
(which wasnt working on liquid and some others I believe)
nerotix said:
So ambient screen should also work?;o
(which wasnt working on liquid and some others I believe)
Click to expand...
Click to collapse
Well it kinda works....does not use the sensor but it lights up the screen on notification..
Is the bluetooth more stable than the other builds?
abiezer said:
Is the bluetooth more stable than the other builds?
Click to expand...
Click to collapse
it's still kinda wonky when it comes to playing music over it
Bump?
Sent from my victara using XDA Free mobile app
Is GPS working for anyone? I can't get a anything to show on this ROM or Liquid.
I wish I could get a lock, because this baby is super snappy!
I want to apologize for the lack of updates. I embarked on this project at a time when life is hectic for me and so i have had very little time to actually hunt down some of these issues. I'm hoping to do some poking around this week and figure out the GPS issues at the least. I'm not sure what's going on with it...nothing shows up in any logs as far as i can see at first glance but something is obviously up somewhere.
Its not just this ROM. Liquid has issues too. I think cm12 also. Its weird, some people have great success and other have none.
Agree, I've had no GPS issues on any of the ROMs for this device.. Pure Edition and always clean flash and wipe everything
matt99017d said:
Its not just this ROM. Liquid has issues too. I think cm12 also. Its weird, some people have great success and other have none.
Click to expand...
Click to collapse
I was aware of that fact...it just makes no sense even more considering this...if it was some file or something missing it would happen to everyone and it would trow some sort of error i would think....
CWick4141 said:
Agree, I've had no GPS issues on any of the ROMs for this device.. Pure Edition and always clean flash and wipe everything
Click to expand...
Click to collapse
Lets try a shot in the dark...can you try this for me...1.fresh boot 2. turn on High accuracy location mode 3. Open up GPS Test let it sit for a few min(or till it gets a lock) then send me a logcat of all this so i can compare...it's something to look at at least...on another note i found a fix for the WiFi hotspot...even tho for CM it seems to have fixed itself somehow it still was not working for me with slim and i could not locate any commit in CM source to affect this so i figured out my own fix...might be temporary as i will still try to hunt in CM source but won't take too much time on that
Grondinm said:
Lets try a shot in the dark...can you try this for me...1.fresh boot 2. turn on High accuracy location mode 3. Open up GPS Test let it sit for a few min(or till it gets a lock) then send me a logcat of all this so i can compare...it's something to look at at least
Click to expand...
Click to collapse
I'm back on stock.. If I get bored of it before I see any updates I'll pull a log for you