Related
Hello,
I have flashed my Galaxy Tab with roto JMI, but it's stuck at the "GalaxyTab / Samsung" boot screen.
I can get into download mode with volume down and power, I can reflash it but in the end it does not boot.
What can i do?
loony
*bump* anybody?
Help please!!! I have the same problem!
I am still having this problem. I am wondering if there is any way how to debug whats happening at the Samsung logo screen. With adb the devices is not detected (it seems not to be detected at the usb controller).
What did you use to flash?
What files did you use?
Give all the info so people can help
Sent from my GT-P1000 using Tapatalk
Hi, I have exactly the same problem.
After upgrade du JMI roto with odin 1.7 (all upload seems to be ok, repartition with p1 and pda file Roto-JMI-Full-v2 no error message) but the device hangs on samsung galaxy tab logo and don't boot.
In my case previous version was pda jj3/phone jid / scs jj2
rsmurdoch said:
What did you use to flash?
What files did you use?
Give all the info so people can help
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
Device it GT-P1000 (German/European version)
Bought the device
Got a lot of restarts
Flashed with P1000OXAJM6
Device worked again for some days
Device not booting anymore
Tried reset with different methods (Touch screen, press power; Touch menu button and power button): Sometimes worked, sometimes not
Recently not booting anymore, no trick worked
Flashed Roto Roto-JMI-Full-v2.tar with P1_add_hidden.pit
Device still not starting
Flashed original firmware: GT-P1000_P1000XXJK5_P1000OXAJK5_P1000XXJK5_P1000XXJK5_XX_DBT.zip
Device not starting
Flashed ROTO with Heimdall again (before used Odin only): Device not booting
Thanks!
Same Problem
Im on the SPH-P100, I have the same issue I can access it in Adb the log shows it in stalling all of my old .apks but it never boots past the logo.I have re flashed also but no luck plz help if u can i can post the logcat here but it goes for hrs -_- I assume it loops the process.
loonyt said:
Device it GT-P1000 (German/European version)
Flashed with P1000OXAJM6
Click to expand...
Click to collapse
So, this one contains a bootloader (Sbl.bin). maybe thats the cause of the problem. Still, I wonder why it started in the first place and then after some reboots it gets stuck. I tried different Kernels with no luck. Maybe I should try to flash a new bootloader? However, that could brick the device forever.
Loonyt
loonyt said:
Device it GT-P1000 (German/European version)
Bought the device
Got a lot of restarts
Flashed with P1000OXAJM6
Device worked again for some days
Device not booting anymore
Tried reset with different methods (Touch screen, press power; Touch menu button and power button): Sometimes worked, sometimes not
Recently not booting anymore, no trick worked
Flashed Roto Roto-JMI-Full-v2.tar with P1_add_hidden.pit
Device still not starting
Flashed original firmware: GT-P1000_P1000XXJK5_P1000OXAJK5_P1000XXJK5_P1000XXJK5_XX_DBT.zip
Device not starting
Flashed ROTO with Heimdall again (before used Odin only): Device not booting
Thanks!
Click to expand...
Click to collapse
*bump* Can anybody help?
I have a very similar problem.
I flashed the [ROM] Roto JMI Pre-Rooted Firmware v2 [Feb 4, 2011], and got stuck on the Samsung Boot screen.
Now, I can't even get the Downloading mode to work. It opens fine, but Odin/Heimdall doessn't detect the Tab at all.
Hopefully, someone knows what's going on. If not, I'm taking it back to my carrier, and asking them to fix it (assuming they'll fix it).
Maybe this will help for the bootloader.
Its a bootloader patch. Please read thru the thread. Hope it helps.
http://forum.xda-developers.com/showthread.php?t=888071
Sent from my GT-P1000 using Tapatalk
dlui1 said:
Now, I can't even get the Downloading mode to work. It opens fine, but Odin/Heimdall doessn't detect the Tab at all.
Click to expand...
Click to collapse
Dont get what you mean by that. You cant get it to download mode but your tab start up fine?
Download mode = press vol down + power pn button.
As for odin/heimdall doesnt detect the tab it could be usb port (some reports in android development thread) or could be usb drivers.
As i need to switch usb drivers when i need to flash my tab & my dell streak.
Hope it helps to start you off.
Sent from my GT-P1000 using Tapatalk
Qsilver2001 said:
Dont get what you mean by that. You cant get it to download mode but your tab start up fine?
Download mode = press vol down + power pn button.
As for odin/heimdall doesnt detect the tab it could be usb port (some reports in android development thread) or could be usb drivers.
As i need to switch usb drivers when i need to flash my tab & my dell streak.
Hope it helps to start you off.
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
I meant that I can get into Download mode, with the Downloading logo, but doesn't get detected by Odin. And it stays stuck on the Samsung boot logo if turned on normally. Can't get into recovery either.
Before I flashed the Roto ROM, Odin was working perfectly fine. I've been flashing other kernels and ROMs before. But now, the USB doesn't even seem to get detected. It's like nothing is plugged in. Can't even choose to install/uninstall old/new drivers.
I dont think it's the USB port, as I've tried to connect to Odin on 3 different computers, trying every available port on each. It's looking like the USB connector is just dead or something.
My tabs mainboard was broken, it was replaced and now it works again.
Sent from my GT-P1000 using XDA App
Same problem here man. I CAN get in to download mode. Odin recognize it normally. I CAN download normally. Look likes everything is normal, but after update it restarts, but hangs on Galaxy Tab Samsung logo. I've tryed everything with different firmware, custom-roms, hacking things, but with no success.
Can someone please help me?
Same problem here. My tab is stuck at samsung galaxy logo and until now, no one could provide an answer.
I flashed some ROM from samfirmware that must of locked the bootloader (JMF). Then I tried to flash JM6, JMA, JMC, JMK, JJ4, JJ7, JM5, JJ1, JID and almost all ROTO's. with and without pit files using ODIN 1.7. I also tried a stock ROGERS ROM (that i downloaded from this forum) using Heimdall. The tab always boots to samsung galaxy tab logo. I've done alot of reading in this forum and followed many flashing instructions but when applied, it doesn't work for me.
My main concern: is there still hope with the tab ? or it's gone forever.
Is there any specific order that i must follow when flashing ? ( ie, flash one specific ROM before another). The tab was canadian that was flashed to euro.
Thanks for reading my post.
the dbdata file is corrupted.
1) download this file
http://forum.xda-dev...98&d=1290261479
2) extract it
3) use Odin to flash it under the PDA option
-make sure repartition is UNCHECKED
-do not select any pit file
-leave everything else the same
handfree said:
the dbdata file is corrupted.
1) download this file
http://forum.xda-dev...98&d=1290261479
2) extract it
3) use Odin to flash it under the PDA option
-make sure repartition is UNCHECKED
-do not select any pit file
-leave everything else the same
Click to expand...
Click to collapse
Same prob. tab reboots to samsung logo.
Same Here, I tried many combinations with the help of experts on this board. Conclusion: shipped to Sammy for warranty repair.
Hi all,
I recently got a samsung i9000 after owning an htc desire for a while.... I was more than happy with cm7 on the htc so i rooted etc and installed it on my galaxy... but it seems that its a bit more buggy on the i9000 port and i had loads of force closes and my phone was pretty unusable... so i then used clockwork recovery to install what i believed was the correct version of darky's rom 10.2 (http://forum.xda-developers.com/showthread.php?t=814091) and now im stuck in a bootloop... when i turn it on for 'normal' use, the original GALAXY S logo comes up (the one that says SAMSUNG at the bottom of the screen.... then it switches to the GALAXY S logo with cyanogen(mod) underneath it, then it restarts and im back to the original SAMSUNG logo.
I've tried to enter download mode (vol down, home then power) and when i do this, it just restarts with the original logo in a loop until i let go, then the cyanogen(mod) logo comes up.
Ive downloaded kies and odin to a fresh machine, but when i connect the phone over usb, I get the litter circular timer icon lighting up my phone for a few seconds, then the cyanogen(mod) screen comes up for a few seconds.... and then reboots....
Anyone got a way out for me? ive been without a phone for a few days and its really hurting now!
So you can't get into download mode??, did you flash back to stock rom before flashing Darky's? Because with CM7 a froyo bootloader is needed, and with Darky's a GB bootloader is needed. If you can get into recovery, go to mounts and storage, format system, data, cache, and datadata. Then pull battery out and try getting into download mode again Vol down + home + power. Report back dude
Sent from my GT-I9000 using XDA Premium App
Heya, thanks for your help, I now see what it is ive done wrong (did not go back and flash a stock rom) but i cant seem to get into download or recovery at all... is there another key combo aside from vol down, home and power button?
deeuk said:
Heya, thanks for your help, I now see what it is ive done wrong (did not go back and flash a stock rom) but i cant seem to get into download or recovery at all... is there another key combo aside from vol down, home and power button?
Click to expand...
Click to collapse
No I'm afraid not, their are two other things you could try....using adb booting into download mode from their....or a jig....that will force it into download mode, u in the UK??
Sent from my GT-I9000 using XDA Premium App
I guess you need a jig to get into download mode. after that, try to flash to different ROMs and see if you have fix the problem.
If you internal sd card is physically damaged, try this method here:
http://forum.xda-developers.com/showthread.php?t=1188482
Yep, Im in the UK.... I dont think the internal sd is damaged as it was fine before flashing darkies rom... Ive not used adb to try and force a 'download mode' before.... handy link to a tute?
sorry for my brevety, im quickly writing this at work!
deeuk said:
Yep, Im in the UK.... I dont think the internal sd is damaged as it was fine before flashing darkies rom... Ive not used adb to try and force a 'download mode' before.... handy link to a tute?
sorry for my brevety, im quickly writing this at work!
Click to expand...
Click to collapse
I could send you my jig if you like? As long as you send it back when finished?? PM me if you want it because in all honesty if your not familiar with adb I wouldnt go messing around with it
Sent from my GT-I9000 using XDA Premium App
Hi.
I have a Galaxy S+ I9001. I had cranyum rom installed on it. One day it just restarted and after it got stuck in bootloop.
It onlyshows SAMSUNG logo, and then restarts and so on...
I can't get into recovery using 3 button combo, but I can get into download mode.
The problem is that it appears to write ok with Odin Multi downloader 4.43, but when it gets to the reboot part, the phone just power off and gets to the same bootloop. If I disconnect the usb cable, it shows a vertical battery icon, then black screen, again battery icon, and so on... Tryed with a different battery witch was charged to 100% before flashing because I tought that it was running low on battery, but the result was the same.
Tryed many different firmware and same behavior.
Is it possible to be a hardware problem?
Any suggestions?
Thanks.
try to flash clockworkmod then flash anther rom >>>> it worked for me in same issue like you have !
---------- Post added at 12:36 AM ---------- Previous post was at 12:31 AM ----------
or try this
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#Boot-loop
It does't matter what I try to fash to the phone via Odin. It says thet the flash was successful, and goes to the same bootloop.
Tryed flashing different roms, feamod recovery, clockworkmod, bootloader. Nothing changes.
So flash full rom wit pit and then root it again then do what ever u like
Sent from another galaxy powered by CM10 & Syiah
The problem is that it's a Galaxy S Plus - I9001. I can't flash it with PIT file. That's only for Galaxy S - I9000.
Does the pit file works for Galaxy S+ also? All that I found with pit file was for Galaxy S.
I can flash mine with AriesOPS, but that doesn't do the trick. Same bootloop after flashing.
cturcu2004 said:
The problem is that it's a Galaxy S Plus - I9001. I can't flash it with PIT file. That's only for Galaxy S - I9000.
Click to expand...
Click to collapse
First remove battery and press power for a min, remove sim card and ext SD card and than reinsert battery and go into download mode Download the CWM 6.0 recovery, link on My Android Collections below and try to get recovery First, than go into recovery , In recovery WIPE (wipe data/factory reset + wipe cache partition + format /system) enter advanced and wipe dalvik cache too than flash the ROM
I allready tried to do that. It flashes ok with odin multi downloader 4.43, but when it goes to restart, the phone gets back in the loop, and I can't get it to recovery via vol up+power (with or without usb connected). It just gets to the same boot loop in witch displays just the SAMSUNG logo for about one second, the restarts, and so on.
cturcu2004 said:
I allready tried to do that. It flashes ok with odin multi downloader 4.43, but when it goes to restart, the phone gets back in the loop, and I can't get it to recovery via vol up+power (with or without usb connected). It just gets to the same boot loop in witch displays just the SAMSUNG logo for about one second, the restarts, and so on.
Click to expand...
Click to collapse
Don't let it restart after flash by unticking auto reboot and than pull out battery after flash, reinsert battery and use combo key to enter recovery
Still no luck. Same behavior. Nothing changed.
cturcu2004 said:
Still no luck. Same behavior. Nothing changed.
Click to expand...
Click to collapse
ok, try switch to this flasher and do a wipe at the same time http://forum.xda-developers.com/showthread.php?t=1574149
Unfortunately, from what I have read, that flasher is used with the phone started and connected to the pc in debugging mode.
I've just tryed anyway. Nothing to lose
Nothing changed.
I really believe that it's a hardware problem.
So, any other ideeas? Or it's really bricked?
cturcu2004 said:
So, any other ideeas? Or it's really bricked?
Click to expand...
Click to collapse
No, its not bricked, the solution may lie in the technique , have you tried these http://forum.xda-developers.com/showthread.php?t=1660596 , :victory:BUT First it may wise IF used another PC or Lap top, just to be sure and also download a Broodplank ROM to flash
What is a broodplank ROM?
Sent from my GT-I9000 using xda app-developers app
The problem it's that in the link that you provided, I must have access to recovery witch I do not have.
Or to use ADB, witch is possible if the phone goes after the Samsung logo at startup, but mine restarts exactly after the logo without going further.
Sent from my GT-I9000 using xda app-developers app
cturcu2004 said:
What is a broodplank ROM?
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Broodplank is the developer of BroodROM, just look at the signature of the link I gave you earlier for his ROM's
cturcu2004 said:
I can't get into recovery using 3 button combo, but I can get into download mode.
Click to expand...
Click to collapse
Umm.. correct me if I'm wrong here, wasn't that a 2 button combo in I9001? I have personally flashed my friends I9001 and it was, like [vol+, power on]?
You are right is two buttons combo.
It's just an expression.
But it does not work anyway.
Sent from my GT-I9000 using xda app-developers app
xsenman said:
Broodplank is the developer of BroodROM, just look at the signature of the link I gave you earlier for his ROM's
Click to expand...
Click to collapse
Will have a look to see if that helps.
Thanks.
Sent from my GT-I9000 using xda app-developers app
Have you tried holding the button combo a little longer? Don't get this the wrong way, from my experience I know that getting to recovery on i9001 can be a little pain in the a$$ and I really don't know why. Sometimes it works and sometimes it doesn't.
Hi all. I have a problem with an S5830 which was on 2.3.6 Stock+Root. It was network locked (even if with the code to check it said every lock was off), so I tried the factory reset solution listed here http://forum.xda-developers.com/showpost.php?p=9006090&postcount=1 using the code *2767*3855#. After the reboot my phone got stuck in a bootloop. I tried flashing with Odin many different fw, with and without data.rfs just to be sure it wasn't corrupted, but my phone just keep looping after the samsung logo.
Is there an easy way to fix it?
Thanks
Just in case it can be useful, more details:
1) After the Odin autoreboot it keeps lopping without even displaying the samsung logo (display just go on and off), but if i remove/insert battery and turn it on it loops after the samsung logo.
2) Download mode, Special download, and Ramdump mode works, but Recovery mode don't.
matrixino said:
Hi all. I have a problem with an S5830 which was on 2.3.6 Stock+Root. It was network locked (even if with the code to check it said every lock was off), so I tried the factory reset solution listed here http://forum.xda-developers.com/showpost.php?p=9006090&postcount=1 using the code *2767*3855#. After the reboot my phone got stuck in a bootloop. I tried flashing with Odin many different fw, with and without data.rfs just to be sure it wasn't corrupted, but my phone just keep looping after the samsung logo.
Is there an easy way to fix it?
Thanks
Just in case it can be useful, more details:
1) After the Odin autoreboot it keeps lopping without even displaying the samsung logo (display just go on and off), but if i remove/insert battery and turn it on it loops after the samsung logo.
2) Download mode, Special download, and Ramdump mode works, but Recovery mode don't.
Click to expand...
Click to collapse
For Recovery mode: did you tried when you release "Power" button, button "Vol Up" hold longer (when you see Samsung logo then release "Vol Up" button)?
Jonny_Brravo said:
For Recovery mode: did you tried when you release "Power" button, button "Vol Up" hold longer (when you see Samsung logo then release "Vol Up" button)?
Click to expand...
Click to collapse
The recovery mode in S5830 is only Home+Power, Home+Power+VolUP is RamDump mode.
matrixino said:
The recovery mode in S5830 is only Home+Power, Home+Power+VolUP is RamDump mode.
Click to expand...
Click to collapse
Ohh sorry, I have two smartphone (S5830 and S9001) and in this case my mind they went on S9001 - he have R.Mode with Vol Up + Power button
Jonny_Brravo said:
Ohh sorry, I have two smartphone (S5830 and S9001) and in this case my mind they went on S9001 - he have R.Mode with Vol Up + Power button
Click to expand...
Click to collapse
Ye I know I also have a I9000 and I9300 and it's like that too. This is just some phone a friend gave me because he didn't use it anymore.
Anyone to help this guy?
Reboot to recovery and do a factory data reset
Shaaan said:
Reboot to recovery and do a factory data reset
Click to expand...
Click to collapse
Please read the first post:
Just in case it can be useful, more details:
1) After the Odin autoreboot it keeps lopping without even displaying the samsung logo (display just go on and off), but if i remove/insert battery and turn it on it loops after the samsung logo.
2) Download mode, Special download, and Ramdump mode works, but Recovery mode don't.
Click to expand...
Click to collapse
Try reflashing via odin.
Sent from my GT-S5830 using xda premium
Venomous Viper 119 said:
Try reflashing via odin.
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Read my first post. I tried.
matrixino said:
Read my first post. I tried.
Click to expand...
Click to collapse
Go to www.themythace.com/flash-stock-rom.html & follow the steps. After flashing, odin shows, closing serial port & rebooting device or something like that. Wait until pass appears. This time your device ends up in a boot loop. Now, take off battery & go back to downloading mode & reflash via odin. This time your device might boot. Atleast for me it did...
I never had a head ache & some one recommended me rooting !!!
Hmmm I'm afraid yours is bricked, though not unfixable.
When in odin did you use the right .ops file ?
Also, which recovery were you using ?
It is possible that your partitions are corrupted.
TjBurn said:
Hmmm I'm afraid yours is bricked, though not unfixable.
When in odin did you use the right .ops file ?
Also, which recovery were you using ?
It is possible that your partitions are corrupted.
Click to expand...
Click to collapse
I used the correct Cooperv1 ops (I had flashed with it other times when I was trying custom roms). I was using CWM as recovery. Also I tought about the partition getting corrupted, that's why I downloaded an old stock rom with all the filesystem .rfs files (including data) to recreate them, but still it didn't work. At this point my only guess is that efs got corrupted in some way (I even have a backup of it but dunno how to restore it, did it with the "cat xxx > /file" procedure while tring to get the network unlock code).
When you say it's not unfixable, what you mean exactly? Anything that I can do at home without sending it to Samsung?
Thanks for your time.
Hmmm. I suspect your guess is right, perhaps someone else may know how to restore it.
I had to send mine to Samsung, and although they said they gave me a new motherboard I suspect they simply used jtag.
Sent from my GT-S5830 using xda app-developers app
TjBurn said:
Hmmm. I suspect your guess is right, perhaps someone else may know how to restore it.
I had to send mine to Samsung, and although they said they gave me a new motherboard I suspect they simply used jtag.
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
What is this Jtag? Something that I can build at home? Any scheme?
matrixino said:
What is this Jtag? Something that I can build at home? Any scheme?
Click to expand...
Click to collapse
You can try searching about jtag & oneclickunbrick on google or on xda. Not sure what the processes involve but they help booting into downloading mode if you weren't able to before. But did you try what I suggested before ??
I used to have beautiful life before. Now I'm in engineering...!
Venomous Viper 119 said:
You can try searching about jtag & oneclickunbrick on google or on xda. Not sure what the processes involve but they help booting into downloading mode if you weren't able to before. But did you try what I suggested before ??
I used to have beautiful life before. Now I'm in engineering...!
Click to expand...
Click to collapse
Oh then it wouldn't help. I can boot in download mode, but flashing a stock rom didn't fix it. I tried several times.
Put it in download mode again and flash again or try a different rom. If you have download mode it isn't bricked its fixable from home
DEMOCRACY™NT
brewy said:
Put it in download mode again and flash again or try a different rom. If you have download mode it isn't bricked its fixable from home
DEMOCRACY™NT
Click to expand...
Click to collapse
I tried many times, with different roms, one package and not. Nothing fixed it. If it's the efs corrupted I think there is nothing you can do, even if I can go in download mode.
I think there is a way to flash cwm recovery via Odin you could try that, it could fix it but I'm not to sure but it's always worth ago
And when using Odin you just need ops file checked and one package checked and untick the first box were the three boxes are
DEMOCRACY™NT
I am looking for some serious help, I rooted my Samsung Galaxy Tab 8.9 4G LTE (SGH-i957) through the instructions that I found on this site by first installing Clockworkmode Recovery and then installing Jelly Bean 4.1.1 using Odin. Everything seemed to work fine with this, but then I decided to go one step further and load a over clocking kernel via Odin to increase my Processing speed. This process went fine through Odin and then after the auto reboot it all fell apart... the tablet will now only periodically display the first and second samsung logos and then just go blank or will display the battery icon with power off and plugged into the PC. Either way I have been unable to access the Boot screen or the Download screen...
IS THERE A FIX TO THIS? or am I just finished?
I have tried the "One Click Unbrick" program with no results and Odin intermittently recognizes the device is connected to the PC as the Tablet cycles through what appears to be an 1 second long boot up attempt.
Looking for someones brilliant idea haha...
Any and all help is greatly appreciated!!
Wrong section, but here goes. I'm no expert but Samsung devices are notoriously hard to eff up beyond fixing.
Can you get back into your recovery? I would do that, do all your normal wipes and reinstall a rom with its stock kernel.
If that doesn't work well then, I'd say Odin back to stock. If it's just a soft brick fixing it shouldn't be a problem.
Of course someone else who knows what they are doing could chime in here lol.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
You flashed a hc kernel on a 4.x system. This is a gaurenteed soft brick. Just odin back to stock through download mode.
Sent from my SAMSUNG-SGH-I727 using xda premium
orlandoxpolice said:
You flashed a hc kernel on a 4.x system. This is a gaurenteed soft brick. Just odin back to stock through download mode.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
I would love to do exactly what your suggesting but I am so far unable to access the download mode using the pwr and vol keys as normal... also where can I get a stock kernel as I was looking for one for hours yesterday with no luck? Do you have any suggestions on how to re-access the download mode in my current situation. Thank you for you suggestions thus far!
If you have a complete TWRP backup from before you flashed the OC kernel, just reboot into recovery and restore boot. That'll replace the HC kernel with what you were running before. That'll save you the effort of going through the entire process again to get back to JB.
st0nez0r said:
Wrong section, but here goes. I'm no expert but Samsung devices are notoriously hard to eff up beyond fixing.
Can you get back into your recovery? I would do that, do all your normal wipes and reinstall a rom with its stock kernel.
If that doesn't work well then, I'd say Odin back to stock. If it's just a soft brick fixing it shouldn't be a problem.
Of course someone else who knows what they are doing could chime in here lol.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Thank you for your advice and at the current time I am unable to access the recovery/boot/download screens... if I could get to that then we are back in business... I am looking for suggestions on how to regain access to that area first and then I would like to follow the advice for you all from there the stock kernel direction first...
nrvate said:
If you have a complete TWRP backup from before you flashed the OC kernel, just reboot into recovery and restore boot. That'll replace the HC kernel with what you were running before. That'll save you the effort of going through the entire process again to get back to JB.
Click to expand...
Click to collapse
Thank you for your response, so far Odin only picks up the device for a second before it disappears again and keeps repeating the cycle over and over agian. It is as if the Tablet keeps attempting a reboot cycle but fails to initialize the booting process? I don't know if I am making any sense to all of you that are much smarter than I at the stuff.
I am trying to time the start of Odin to the point that when it connects to the device that it is also recognizing the device at the same time... Kinda poking in the dark here as I am out of solutions...
The tablet attempts a reboot every 45 SECS and it recognized for only 3 SECS... Thoughts??
You need to get it to stop rebooting and into download or recovery mode. Try every button combo possible. If you hold power down for ten seconds it should shut off
Sent from my SAMSUNG-SGH-I727 using xda premium
Hold down the volume button near the power button as it boots to get into download mode... the other volume button will take you to recovery.
orlandoxpolice said:
You need to get it to stop rebooting and into download or recovery mode. Try every button combo possible. If you hold power down for ten seconds it should shut off
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
I have tried every key combination possible with no results the only thing the tablet does is do a quick single vibrate just like it does when you power it on and it boots up just without the actual booting process... and when the tablet is plugged into the PC it displays the battery symbol with the star bright icon over it like its thinking about charging but to my knowledge does nothing beyond that as far as charging is concerned. But it does do the single vibrate once every 45 secs as if it was booting up and is recognized on the PC through Odin for only 3 secs... not sure where to go from here now??
Hold the volume buttons down don't just press them. Also try button combos but instead of hitting power plug your charger in and out to get it to reboot.
Sent from my SAMSUNG-SGH-I727 using xda premium
Had these issues back in Nov when I tried to move up on twrp. Success to real download came when I used 10.1 tab button comnands
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
What are the tab 10.1 button commands?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Humm.. Didn't write them down. Goggled "samsung 10.1 tab" and found the set I used. Same three buttons but different ways to press. Won't hurt to try because all that is left in this case is a $50 jtag job and two weeks.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
samsung sgh-i957 wont turn on after i wiped catch partition and power of manually
samsung sgh-i957 wont turn on after i wiped catch partition and power of manually.
the device has refused to charge or even power on any more pls what should i do?
snwaede said:
samsung sgh-i957 wont turn on after i wiped catch partition and power of manually.
the device has refused to charge or even power on any more pls what should i do?
Click to expand...
Click to collapse
Doesn't sound good. Plug it in and push and hold the power button for 15 seconds. But I think it died on you.
Sent from my SAMSUNG-SGH-I727
how to restor boot sector partition on samsung sgh i957
jd1639 said:
Doesn't sound good. Plug it in and push and hold the power button for 15 seconds. But I think it died on you.
Sent from my SAMSUNG-SGH-I727
Click to expand...
Click to collapse
I have tried every thing but to no avail.
the partitions are scattered, because i install a voice call zip, and modem zip from xda site.
how can i restor the booting partitions back pls help its rely urgent.
snwaede said:
I have tried every thing but to no avail.
the partitions are scattered, because i install a voice call zip, and modem zip from xda site.
how can i restor the booting partitions back pls help its rely urgent.
Click to expand...
Click to collapse
Does Odin recognize your device? I would try to flash the factory firmware with odin. You can get it at sammobile.com for the i957
Sent from my SAMSUNG-SGH-I727
odin does not recognise my device
jd1639 said:
Does Odin recognize your device? I would try to flash the factory firmware with odin. You can get it at sammobile.com for the i957
Sent from my SAMSUNG-SGH-I727
Click to expand...
Click to collapse
odin does not recognise my device any more.
the device does not come on or enter download mode.
snwaede said:
odin does not recognise my device any more.
the device does not come on or enter download mode.
Click to expand...
Click to collapse
If Odin doesn't recognize it and it doesn't turn on it's dead.