Database Develop

pls...pls...pls...HELP

HI
i downgrade my device from rocket rom ics tu 2.3.6 with pc odin but it stuck on samsung galaxy note n7000 logo...and it goes to downloading and recovery
i test 1000 way but it stuck again ..
.
.
.
BUT when i install a 3 file rom for example la3 it stuck on datafs then i flash a 1 file rom for example la6 it finish completely and it goes to recovery then when i reboot the device the bootanimation playS but doesnt come to rom and when i wipe data/factory rset it stuck on first logo again
EXCUSE ME FOR MY BAD ENGLISH
PLS HELP...HELP...HELP

pls help .....

Try Flashing different ROM. and please mention the procedure u flashing it.

ranjan.alva said:
try flashing different rom. And please mention the procedure u flashing it.
Click to expand...
Click to collapse
i flash other roms but ...

Do u get any errors while flashing GB ROMs??
If could enter Boot animation , you can try
1. Enter recovery mode and "Wipe / Factory Reset "
2. "Wipe cache"
3. Reboot
after this it should boot up normally.

boot into download mode flash rom using pc odin

ranjan.alva said:
do u get any errors while flashing gb roms??
If could enter boot animation , you can try
1. Enter recovery mode and "wipe / factory reset "
2. "wipe cache"
3. Reboot
after this it should boot up normally.
Click to expand...
Click to collapse
richy99 said:
boot into download mode flash rom using pc odin
Click to expand...
Click to collapse
i try but stuck again ...

farzad.u235 said:
i try but stuck again ...
Click to expand...
Click to collapse
Try flashing cf chinese repack then use abyss 3.9 kernel and flash back to gb with full wipe before u flash gb rom if u come from ics u need to flash gb kernel before flashing gb rom
And make sure to reboot recover not phone u will not beable to boot phone just recover into redpill
Sent from my GT-N7000 using XDA Premium HD app

I downgraded from imilka's rom to KK1 like this:
Enter download.
Start PC Odin (DON'T CHANGE ANYTHING).
Connect phone.
Click the PDA button and select .tar file.
Click Start.
Flash finishes.
Phone reboots.
Plays startup animation.
Takes a long time.
Plays startup animation again (bootloop).
Enter recovery (Vol-up+Home+Power).
Wipe data/factory reset.
Wipe cache partition.
Reboot.
That worked for me.
If it doesn't work, you could try to flash imilka's 4.0.3 rom and do the above procedure.
Best of luck!
Daan

farzad.u235 said:
i try but stuck again ...
Click to expand...
Click to collapse
Flash any CF Kernel using PC Odin and get CWM
then copy any custom ROM to ext_sd card
boot into CWM recovery
flash Custom ROM

Did you make a nandroid backup? Its much easier if you did make one.
Sent from my iphone 4s jailbreak and rooted to run android OS

DaanJordaan said:
I downgraded from imilka's rom to KK1 like this:
Enter download.
Start PC Odin (DON'T CHANGE ANYTHING).
Connect phone.
Click the PDA button and select .tar file.
Click Start.
Flash finishes.
Phone reboots.
Plays startup animation.
Takes a long time.
Plays startup animation again (bootloop).
Enter recovery (Vol-up+Home+Power).
Wipe data/factory reset.
Wipe cache partition.
Reboot.
That worked for me.
If it doesn't work, you could try to flash imilka's 4.0.3 rom and do the above procedure.
Best of luck!
Daan
Click to expand...
Click to collapse
which kk1?
please give me a link
thanks

farzad.u235 said:
which kk1?
please give me a link
thanks
Click to expand...
Click to collapse
in android development for note there is a post from Dr. Keatan with all the stock rom
there you can find kk1 i imagine

farzad.u235 said:
which kk1?
please give me a link
thanks
Click to expand...
Click to collapse
KK1 is a dutch rom I don't know if you wan't to use it.
I used it as it's directly rootable and I'm dutch.
edit: and it immediately said there was a software update.

i try your ways but stuck again ...

another way?

try doing this:
1. Go to recovery
2. Flash Abyss 3.9 kernel or any Abyss kernel with NO touch redpill recovery
3. Then go to advanced Reboot recovery
4. flash a zip file (custom roms)
5. Reboot

see my signature

i try all he ways that you say but ...
another way?
thanks for your answers

farzad.u235 said:
i try all he ways that you say but ...
another way?
thanks for your answers
Click to expand...
Click to collapse
Do u have cwm or is it stock recovery
Sent from my GT-N7000 using XDA Premium HD app

Samsung Galaxy Mini 2 6500D Bootloop

I just flashed T-Mobile firmware and i got bootloop. It's not CWM bootloop. I can go in download mode but i can't go in recovery. I don't know what to do, and help will be appreciated.

digitz_ said:
I just flashed T-Mobile firmware and i got bootloop. It's not CWM bootloop. I can go in download mode but i can't go in recovery. I don't know what to do, and help will be appreciated.
Click to expand...
Click to collapse
connect your phone to the computer
go into donwload mode
start odin
flash http://www.hotfile.com/dl/176669754/95e7a92/S6500DXXLD3_S6500DPROLD1_PRO.zip.html

RoSinner said:
connect your phone to the computer
go into donwload mode
start odin
flash
Click to expand...
Click to collapse
Nope, still same thing.

digitz_ said:
Nope, still same thing.
Click to expand...
Click to collapse
you flashed the file I linked and you're still getting a bootloop ? you must be doing something wrong

RoSinner said:
you flashed the file I linked and you're still getting a bootloop ? you must be doing something wrong
Click to expand...
Click to collapse
What can I do wrong? I putted MD5 in PDA and flashed.

I tried to flash CWM and diffirent firmwares but no luck.

digitz_ said:
What can I do wrong? I putted MD5 in PDA and flashed.
Click to expand...
Click to collapse
As I know, the one package file of extension (.tar.md5) is placed under One Package field & not in PDA.
Also u need an ops file which should be placed under OPS field.
Sent Via XDA™ Premium

Galaxy_Rohit said:
As I know, the one package file of extension (.tar.md5) is placed under One Package field & not in PDA.
Also u need an ops file which should be placed under OPS field.
Sent Via XDA™ Premium
Click to expand...
Click to collapse
I was flashing before like this, everything was fine. There must be a way to fix this.

Nobody? Is anything possible with adb or fastboot?
EDIT: I fixed it. Thanks anyway.

Galaxy_Rohit said:
As I know, the one package file of extension (.tar.md5) is placed under One Package field & not in PDA.
Also u need an ops file which should be placed under OPS field.
Sent Via XDA™ Premium
Click to expand...
Click to collapse
nah we can flash one package with pda

How did you fix it?
digitz_ said:
Nobody? Is anything possible with adb or fastboot?
EDIT: I fixed it. Thanks anyway.
Click to expand...
Click to collapse
Hello, I'm having exactly the same problem. I went back to stock from cm10, but now I have a bootloop (boots until samsung logo and reboots.)
I think I just need to wipe data, but I can't access recovery. I even flashed cwm a few times and flashed the stock rom with a pit file, but I'm still stuck on samsung logo.
So, any help?

Here: http://forum.xda-developers.com/showthread.php?t=1853159

bro .. use odin
first switch to download mode then connect ur mob with pc , then use odin and update it with original pda ..

digitz_ said:
EDIT: I fixed it. Thanks anyway.
Click to expand...
Click to collapse
How did you do it, I cannot install adb drivers for some reason, I went back from CM10.1 to stock but now it just keeps repeating boot animation. Please help.

tom1890 said:
Hello, I'm having exactly the same problem. I went back to stock from cm10, but now I have a bootloop (boots until samsung logo and reboots.)
I think I just need to wipe data, but I can't access recovery. I even flashed cwm a few times and flashed the stock rom with a pit file, but I'm still stuck on samsung logo.
So, any help?
Click to expand...
Click to collapse
Hi, I had exactly the same problem, flashed the stock firmwire but it gets stuck on samsung logo, flashed few CWMs but nothing. I really didn't know what to do, then my battery became critical so i connected it to the pc and let it charge. While charging, I tried to acces the CWM recovery (home+volume up+volume down + power) and BAM! It opened recovery, I deleted all user data, cache and factory reset, rebooted and it worked.

Try to flash stock rom

Flashing stock rom didn't work.
Sent from my GT-S6500D using Tapatalk 2

digitz_ said:
Nobody? Is anything possible with adb or fastboot?
EDIT: I fixed it. Thanks anyway.
Click to expand...
Click to collapse
how did you fix this? i have exactly the same issue.

polys643 said:
how did you fix this? i have exactly the same issue.
Click to expand...
Click to collapse
Hi All,
I was struggle with bootloop issue for 3 days. I got my problem when I forgot to wipe phone returning ROM 10.2 to stock rom. Before I didn’t have any problems with getting to recovery mode but after I was not able to get to CWM. Also did try (vol+) (vol-) (home) hold while odin reset all I get RUMDAMP ARM9. Same when trying to hold recovery combination while normal boot. I have no problems with getting to Download mode.
Phone show Samsung animation and then vibrate once, pause, vibrate twice.
What work for me.
Recovery Combination = (vol+) + (vol-) + (home) + (pwr)
1. With odin 3.04 (don know if version matters I hade SS_DL.dll in same folder as odin) I install cwm-6.0.3.3-b2-jena.tar.md5
2. It restarted and get boot loop again
3. When I hold recovery combination phone didn’t boot. But what did I remove battery plug it again. Press (pwr) and immediately (maybe 0.5 sec) I hold rest of the recovery combination. Phone boot and show me logo so I release the buttons. To my surprise I did boot to CWM. (don’t know way but I didn’t do wipe immediately but I restart did try it again to be sure if this works – and it did, at least for me)
Rest was easy (WIPE Factory Reset, Cache, Dalvik Cache and just in case fix permission) restart and did boot to Stock ROM. For some unknown reason now I can normally CWM just buy holding combination and releasing as soon as Samsung logo show up.
I hope this will help somebody.
Now im using CM 10.1 07/07
My phone is S6500D no NFC
Cheers,
Maciej

digitz_ said:
Nobody? Is anything possible with adb or fastboot?
EDIT: I fixed it. Thanks anyway.
Click to expand...
Click to collapse
pleeees tell me how u fix it my phone hase the same proplem u had can u

[SOLVED] no Boot after semaphore 3.3.0s (cm10.2nightly)

I am in latest 10.2 nightly. Wanted to go to semaphore 3.3.0s +hughemem libs. I was on sema3.3.0. Flashed sema3.3.0s via cwm --> stuck on boot.
Flashed 3.3.0s.gar via Odin --> starts, but after restart my phone did not Boot.
So i reflashed 3.3.0 via Odin.
What is wrong with it?
Sent from my GT-I9000 using xda app-developers app
Update:
s3icc0 said:
lordlambda said:
s3icc0 said:
lordlambda said:
s3icc0 said:
lordlambda said:
s3icc0 said:
lordlambda said:
s3icc0 said:
lordlambda said:
s3icc0 said:
lordlambda said:
s3icc0 said:
lordlambda said:
Hello,
i am not able to ask in semaphore channel...so i want to ask you.
I falshed latest cm10.2 nightly, semaphore 3.3.0s and last but not least the hugemem libs via CWM.
after this my phone stucked on boot. Maybe you know the problem?
Many thanks in advance!!
Lordlambda
Click to expand...
Click to collapse
hugemem libs are not required, so the problem has nothing to do with hugemem libs (you only won't be able to record 720p video), but the fact you are stuck on boot maybe connected with something else ... from what firmware you were flashing? can you describe me your whole procedure (or just try to simply flash CM several times until it will boot and then reboot and instal semaphore ...)
Click to expand...
Click to collapse
I was on cm 10.2 (5.12.) and on kernel 3.3.0. Then i wanted to test the 3.3.0s kernel. so i downloaded it, go to recovery and flashed itvia cwm (Kernel is on external SD). There are no problems with the "normal" kernal version. Only by flashing the "s" my phone stuck on boot. In addition, i clean dalvik and normal cache.
And ofcause, i want to flash hugemem libs if the "s" version will boot normaly.
Many Thanks!
Click to expand...
Click to collapse
Strange, maybe try to reflash from internal storage (u can use file manager in cwm, or mount the phone to pc over usb from recovery to upload the files) and make sure you have the right files (as flashing CM11 accidentally with recovery from semaphore 3.3.0 will not boot). I recommend to redownload carefully both files, place on internal and reflash ... should be fine then.
Click to expand...
Click to collapse
My phone can boot, i falshed 3.3.0.tar via odin....thats not the problem. but i try to flash 3.3.0.s from internal storage. Maybe i have to mound or cleare something more than dalvik and normal cache? mound the sd?
Many Tanks!
Click to expand...
Click to collapse
no ... leave everything default in recovery ... so maybe try flashing 3.3.0s via odin too??? there should be no problem switching between standard and "s" kernel ... make sure you have the same size and MD5 version as in the semaphore topic ...
Click to expand...
Click to collapse
I checkes md5 summ....if i flash 3.3.0s via Odin phone starts but in Nest restart i stuck in Boot too.(in sumsung s screen, cant geht to recovery) same behavior AS after flashing "s" in cwm.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
So try to flash CM only .. boot with CM ... remove semaphore app, then reboot to cwm, install "s" version, turn off the phone (dont reboot system from cwm), boot to recovery adn reflash "s" version again, reboot system, instal semaphore app ...
Click to expand...
Click to collapse
I will give it a try after visiting my dentist. Thank you!
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
np, until I will have ideas I'd like to help
Click to expand...
Click to collapse
install cm10.2, deinstall semaphore app, insatll 3.3.0.s, turn off phone---no chance to get back in cwm
Click to expand...
Click to collapse
strange ... can you send me the locations were you downloaded the 3.3.0s (link to the file)
Click to expand...
Click to collapse
http://78.46.194.137/kernels/Semaphore_JB_3.3.0s.zip
Click to expand...
Click to collapse
sorry, I can't help you more, better to ask in the thread ... as it must be something else in your phone .... or if you don't mind loosing all your data I would recommend to go through odin from stock samsung, just to be sure (that is what I will do in this situation ... complete reinstalation ...) - it will take no more than 30 minutes to get back to stock and back to CM10.2
Click to expand...
Click to collapse
Solution: Flashing 3.3.0s.tar 3times via Odin. After each Flash i let the phone reboot!

Thanks for the info ...but it is strange ...in my 10.2-time i flashed Sema-Kernel only via Odin and it was never a problem ...
Amazing technology sometimes it works perfect and sometimes it doesn`t ...
Good to hear that it works now ...
lordlambda said:
I am in latest 10.2 nightly. Wanted to go to semaphore 3.3.0s +hughemem libs. I was on sema3.3.0. Flashed sema3.3.0s via cwm --> stuck on boot.
Flashed 3.3.0s.gar via Odin --> starts, but after restart my phone did not Boot.
So i reflashed 3.3.0 via Odin.
What is wrong with it?
Sent from my GT-I9000 using xda app-developers app
Update:
Solution: Flashing 3.3.0s.tar 3times via Odin. After each Flash i let the phone reboot!
Click to expand...
Click to collapse

Phone Reboot and reboot after flash

Hi everybody,
i just flashed my i8190 with the latest virginity v11 Rom from XXANA2 stock rom, i didn"t wipe the data then after flashing my phone reboot after bootloop without stoping, i tried flashing with another stock rom from sammobile and CM maclaw and he's still rebooting, and i can"t access to recovery, Pls heelp !!

Did you wipe your cache and dalvik-cache?
Sent from Tapatalk on my GT-I8190 running MaclawStudio's Carbon 4.4.2

GXGOW said:
Did you wipe your cache and dalvik-cache?
Sent from Tapatalk on my GT-I8190 running MaclawStudio's Carbon 4.4.2
Click to expand...
Click to collapse
i can't acces to recovery , it's rebooting just after the "Samsung galaxy sIII mini "

Zaketouane said:
i can't acces to recovery , it's rebooting just after the "Samsung galaxy sIII mini "
Click to expand...
Click to collapse
Did you try to flash with odin only the recovery? I mean flash a custom recovery with odin.

Have you tried to access recovery mode after removing battery for a while and inserting it back? Download mode works?

xXPR0T0TYPEXx said:
Did you try to flash with odin only the recovery? I mean flash a custom recovery with odin.
Click to expand...
Click to collapse
yes, i try it but still no acces to recorvery , reboot without stoping

Gw|n said:
Have you tried to access recovery mode after removing battery for a while and inserting it back? Download mode works?
Click to expand...
Click to collapse
i try removing the battery but no result, download mode works for me it write pass in odin , but i see in 2 red message when flashing in my phone. the first one CUSTOM MODEM BINARY!!! and the second one CUSTOM steboot2 BINARY !!!

Custom messages aren't problem at this moment, they can be removed later.

Gw|n said:
Custom messages aren't problem at this moment, they can be removed later.
Click to expand...
Click to collapse
I hope so

maybe try flashing trwp recovery if clockwork recovery doesn't work...

Aronuser said:
maybe try flashing trwp recovery if clockwork recovery doesn't work...
Click to expand...
Click to collapse
try it too no results...

Zaketouane said:
Hi everybody,
i just flashed my i8190 with the latest virginity v11 Rom from XXANA2 stock rom, i didn"t wipe the data then after flashing my phone reboot after bootloop without stoping, i tried flashing with another stock rom from sammobile and CM maclaw and he's still rebooting, and i can"t access to recovery, Pls heelp !!
Click to expand...
Click to collapse
go to download mode & flash stock firmware via odin . it should work

Ahmed.ragab said:
go to download mode & flash stock firmware via odin . it should work
Click to expand...
Click to collapse
i did it, it showed pass on odin but the phone reboot and reboot when the bootloop is shown .. nothing to do ?

Zaketouane said:
i did it, it showed pass on odin but the phone reboot and reboot when the bootloop is shown .. nothing to do ?
Click to expand...
Click to collapse
do you have 3 button combo enabled ?

Zaketouane said:
i try removing the battery but no result, download mode works for me it write pass in odin , but i see in 2 red message when flashing in my phone. the first one CUSTOM MODEM BINARY!!! and the second one CUSTOM steboot2 BINARY !!!
Click to expand...
Click to collapse
I think the custom steboot2 binary cause the problem.

Ahmed.ragab said:
do you have 3 button combo enabled ?
Click to expand...
Click to collapse
If you are talking about recovery i can t acces to.it because it reboots just after the samsung s3 min bootloop

Maybe you can't acces recovery because three button combo don't work. Try this.

Gw|n said:
Maybe you can't acces recovery because three button combo don't work. Try this.
Click to expand...
Click to collapse
it doesn"t work ..

Stock via ODIN
Zaketouane said:
it doesn"t work ..
Click to expand...
Click to collapse
Try flashing complete stock rom via ODIN in PDA. It has worked for me a few minutes ago with exactly same problem. I have an S3 mini GT-I8190.
http //live.samsung-updates.com/details/24398/Galaxy_S_3_Mini/GT-I8190/XEC/I8190XXANA2.html

acme000 said:
Try flashing complete stock rom via ODIN in PDA. It has worked for me a few minutes ago with exactly same problem. I have an S3 mini GT-I8190.
http //live.samsung-updates.com/details/24398/Galaxy_S_3_Mini/GT-I8190/XEC/I8190XXANA2.html
Click to expand...
Click to collapse
i will test it ..

[Q] Help plz! my i8190 stuck in boot loop

Hey guys!
my s3 mini i8190 is stuck on "Samsung Galaxy SIII Mini I8190" in infinite restart!
it's not reaching the samsung logo at all
it happened after i flashed cm11 novafusion 4.4.2 but i got no network (using maclaw twrp)
so i tried carbon but it was the same problem (no network)
so i flashed stock rom 4.1.2 (using odin) that's when this problem occured
plz if anyone has a clue on what this problem might be

Can u go into recovery mode?

o0VIP0o said:
Can u go into recovery mode?
Click to expand...
Click to collapse
thanks for responding!
yes i can go into recovery and download mode too
i tried to wipe cache and factory reset
but still the same

flash custom recovery and reflash rom from recovery

Gw|n said:
flash custom recovery and reflash rom from recovery
Click to expand...
Click to collapse
i tried that
i flashed cwm and twrp both from stock recovery and through odin
it always goes back to stock recovery

warezhafid14 said:
i tried that
i flashed cwm and twrp both from stock recovery and through odin
it always goes back to stock recovery
Click to expand...
Click to collapse
How you did installed cm11 ? With Odin?
Sent from my SM-G900 using xda-developers app

xXPR0T0TYPEXx said:
How you did installed cm11 ? With Odin?
Sent from my SM-G900 using xda-developers app
Click to expand...
Click to collapse
with maclaw's twrp
and when i wanted to go back to stock rom i flashed stock recovery

warezhafid14 said:
with maclaw's twrp
and when i wanted to go back to stock rom i flashed stock recovery
Click to expand...
Click to collapse
flash custom recovery again.
then downlaod pit file from here and reboot
if it doesn´t help, download param.lfs file from here and reboot again.
if it doesn´t help again, follow the intructions here!
Good luck.
I am not resposible for any damage or bricks!!! (had the same problem and i solved it with the steps mentioned above).
m.

moonryder said:
flash custom recovery again.
then downlaod pit file from here and reboot
if it doesn´t help, download param.lfs file from here and reboot again.
if it doesn´t help again, follow the intructions here!
Good luck.
I am not resposible for any damage or bricks!!! (had the same problem and i solved it with the steps mentioned above).
m.
Click to expand...
Click to collapse
thanks man
i will try that
eventhough i did it before

i can't flash custom recovery
i tried flashable ones it gives me signature error
and in odin it pass but
it always goes back to stock recovery
and how is possible to flash pit file as pda?

warezhafid14 said:
i can't flash custom recovery
i tried flashable ones it gives me signature error
and in odin it pass but
it always goes back to stock recovery
and how is possible to flash pit file as pda?
Click to expand...
Click to collapse
then flash stock rom and try it again.
otherwise i have no idea...

moonryder said:
then flash stock rom and try it again.
otherwise i have no idea...
Click to expand...
Click to collapse
thanks man for your time
i tried flashing stock rom many times even rooted ones
anyway thanks man
i appreciate your help

warezhafid14 said:
i can't flash custom recovery
i tried flashable ones it gives me signature error
and in odin it pass but
it always goes back to stock recovery
and how is possible to flash pit file as pda?
Click to expand...
Click to collapse
Some s3 mini's can't change the recovery, it means, if you flash any recovery, your phone will go back automatically to stock recovery. You have to root your phone (example with vroot) and flash a custom recovery manually on your phone with "ROM Manager" or "[ROOT]Recovery Tools - flasher" (you can get both apps on Google play)
Screenshots :

xXPR0T0TYPEXx said:
Some s3 mini's can't change the recovery, it means, if you flash any recovery, your phone will go back automatically to stock recovery. You have to root your phone (example with vroot) and flash a custom recovery manually on your phone with "ROM Manager" or "[ROOT]Recovery Tools - flasher" (you can get both apps on Google play)
Screenshots :
Click to expand...
Click to collapse
when my phone was working i rooted with kingo
than i installed cwm using rom manager
than i flashed maclaw's twrp using cwm recovery
but my phone is not starting now
im in "Samsung Galaxy SIII Mini GT-I8190" loop
im not even reaching the Samsung logo

warezhafid14 said:
when my phone was working i rooted with kingo
than i installed cwm using rom manager
than i flashed maclaw's twrp using cwm recovery
but my phone is not starting now
im in "Samsung Galaxy SIII Mini GT-I8190" loop
im not even reaching the Samsung logo
Click to expand...
Click to collapse
Does it only happen if you flash TWRP?

xXPR0T0TYPEXx said:
Does it only happen if you flash TWRP?
Click to expand...
Click to collapse
CWM too

You said :
warezhafid14 said:
i tried flashable ones it gives me signature error
Click to expand...
Click to collapse
can you make a screenshot of this error?

xXPR0T0TYPEXx said:
You said : can you make a screenshot of this error?
Click to expand...
Click to collapse
when i turn on my phone it shows "Samsung Galaxy SIII Mini GT-I8190"
than it is supposed to show the samsung logo
but no it restarts and again "Samsung Galaxy SIII Mini GT-I8190"
infinite loop
and for flashing from recovery it said
E:signature verification failed

warezhafid14 said:
and for flashing from recovery it said
E:signature verification failed
Click to expand...
Click to collapse
Recovery must be custom.

Gw|n said:
Recovery must be custom.
Click to expand...
Click to collapse
that's what im trying to do
im trying to flash custom recovery