[Q] GT-P1000 Queries - Galaxy Tab Q&A, Help & Troubleshooting

Hello everyone, a neighbour has given me his Samsung Galaxy Tab GT-P1000, requesting me to flash a stock firmware on it. But, before I do so I have a few basic queries.
:silly:
Consequently, I intend on discussing all my queries pertaining to the said device under this thread I have created, rather than creating individual threads and cluttering this sub-forum.
I intend on flashing the P1000XWJP9, a stock Gingerbread (2.3.6) firmware of the United Kingdom/Ireland region. Hence, do I need to use the gt-p1000_mr_PIT PIT file and the dbdata.tar file while flashing the aforementioned stock firmware? Also, am I required to keep the Re-Partition option enabled in PC ODIN before commencing the flashing procedure?
My neighbour's device details are as follows -
Model number: GT-P1000
Firmware version: 2.3.3
Baseband version: P1000DDJP4
Kernel version: [email protected] #4
Build number: GINGERBREAD.DDJPA
After reading Chainfire's [25.01.2011] WARNING! Do not flash JM*,KA*... README! [Patch released, L/N supported] thread, I learnt that all Gingerbread firmwares have signed bootloaders, but flashing custom kernels and custom firmwares should not be an issue.
Personally, I was keen on rooting my neighbour's device through CF Root, using the CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS.zip file, but he is not one bit interested in rooting. So, I have to respect his decision, and make do with just flashing a stock firmware.
I await your expertise, and I thank you all for your patience with my naive queries.

Upon researching further, I learnt about restocking. A massive thank you to priyana, whose signature provides the link to the highly acclaimed Overcome Installation Guide.
:good:
Following the Overcome guide, I believe I could just restock my neighbour's device using the GB-Stock-Safe-v5 package and leave as it is, which would give the device the JQ1 stock Gingerbread (2.3.6) firmware.
But, for the sake of my curiosity, I am keen on learning and thus knowing, if the gt-p1000_mr_PIT and dbdata.tar files along with the Re-Partition option being enabled, are compulsory requirements if I intend on flashing the P1000XWJP9, or any other stock Gingerbread (2.3.x) firmware?
I am aware my queries are naive, but they aid in my learning.
Awaiting your helpful replies.

repartition will be needed if you are returning to stock from custom ROM that uses different partitioning scheme.
It does kind of reformat your storage too, so it is up to you.
I never use dbdata.tar on its own, although I am aware of a few methods that uses that.
If you are using Overcome's method, you use everything that comes in the GB-stock-safe-v5

priyana said:
repartition will be needed if you are returning to stock from custom ROM that uses different partitioning scheme.
It does kind of reformat your storage too, so it is up to you.
I never use dbdata.tar on its own, although I am aware of a few methods that uses that.
If you are using Overcome's method, you use everything that comes in the GB-stock-safe-v5
Click to expand...
Click to collapse
priyana, thank you very much for your prompt response.
:good:
Presently, my neighbour's device is on the JPA stock Gingerbread (2.3.3) firmware, and thus going by your reply, it is clear I do not require the Re-Partition option be enabled. But, I do need the PIT file while flashing another stock Gingerbread (2.3.x) firmware, right?
Also, if I were to root the device based on its current JPA stock firmware, could I use the CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS.zip file to do so?
I await your further assistance.

PIT is partition information table.
You only need pit file to repartition.
So no, you dont need pit file.
Sent from my GT-N7100 using xda app-developers app

CM9.1 flashing issue
Hello everyone, my neighbour suddenly decided, and as such has given me the green signal to root and flash a custom firmware on his GT-P1000.
As the device was on the JPA stock Gingerbread (2.3.3) firmware, I restocked using the GB-Stock-Safe-v5 package, and rooted the device flashing the CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS.tar file via PC ODIN.
I was keen on flashing the CyanogenMod Ice Cream Sandwich custom firmware (CM9.1), and thus copied the cm-9.1.0-p1.zip and gapps-ics-20120429-signed.zip files onto the root of the Internal SD. After that, I booted the device into the CWM custom recovery and performed the 3 wipes (data/factory reset, cache and dalvik cache). Subsequently, I chose the CM9.1 zip file to be flashed.
But here is where I hit a roadblock. The device kept rebooting and thus displaying the CyanogenMod boot screen. This continued into what seemingly was, sort of a loop. As of now, I have only restocked the device again.
:fingers-crossed:
Should I have used the Overcome kernel instead of the CF modified kernel? I am still unsure what went wrong whilst attempting to flash the CyanogenMod custom firmware.
I await your expertise.

From stock, you need to flash cm9.1 3 times, not just one.
Sent from my GT-N7100 using xda app-developers app

CM9.1 flashing issue
priyana said:
From stock, you need to flash cm9.1 3 times, not just one.
Click to expand...
Click to collapse
priyana, thank you very much for your valuable response.
I have not understood your advise about flashing CM9.1 three times, and thus humbly implore you to kindly elaborate further, possibly laying out the procedure.
I thank you for your patience and await your further guidance.

Just do exactly like I said. Flash the Rom zip 3 times.
While doing it, try to read what the screen shows.
First flash typically replaces your kernel, and you return to cwm but no longer cwm 4 or 5 from cf-root or overcome. Likely it will be cwm6 from cm/humberos.
Second flash may say something about converting your partition from bml to MTD.
Third flash will say things about flaring your system. That will be the real Rom, and it takes longer than the first two.
Most newbie just flash once and when returned to new cwm, they thought it is a boot loop. The key is, read the screen.
Sent from my GT-N7100 using xda app-developers app

CM9.1 flashing issue
priyana, thank you very much for your clarified response.
:good:
Kindly pardon my naive behaviour, but do I have to flash the CM9.1 zip file three times manually, or do I choose the option 'install zip from SD card', select the said zip file once, and the process will automatically initiate three times?
I humbly implore you to continue guiding me, and I thank you for your immense patience.

No. Manually 3 times.
Sent from my GT-N7100 using xda app-developers app

@priyana Hey man..can u plz hhelp me..I am trying to flash CM10.1 or Alfoger's and CDesai's..but both of them are throwing Status 7 Error? I have a GT P1000 and I am fro India. WHat am I doing wrong?
PLz PLZPLZ HELP...thanks!

CM9.1 flashing procedure was a success!
Thank you very much, priyana. My neighbour's device now breathes a new life on CyanogenMod 9!
:good:

Related

How to revert to stock kernel

I have a Bell SGS, GT-I9000m. I'm considering installing hardcore kernel only, i.e. no custom ROM. If later I want to revert to the stock kernel, how would I do that?
Thanks for your help.
Sent from my GT-I9000M using XDA App
I'm not quite sure if it is possible with the stock-kernel but if you can make a full backup (like with CWM) you could restore it later. But why do you want to get back to stock-kernel?
If the backup-possibility does not work you have to find the stock-kernel for downloading and flash it via Odin or you have to flash the whole stock-ROM with Odin.
Thanks for your answer. I can't make a Nandroid backup while I'm on stock (because I can't install CWM recovery because I'm on 3e stock recovery, not 2e)
I'm not sure why I would want to go back to stock... Maybe something goes terribly wrong? I guess I just wanted to know if it was possible.
Last question: when you say I would have to find the stock kernel, is that just Google, or are there sites/repositories out there for this sort of thing?
Sent from my GT-I9000M using XDA App
I should add, the site/repo question is for kernels and stock ROMs...
Thanks.
Sent from my GT-I9000M using XDA App
site1ca said:
I'm not sure why I would want to go back to stock... Maybe something goes terribly wrong?
Click to expand...
Click to collapse
Well, then just flash the whole stock-ROM and flash it (look at samnfirmware.com for firmwares).
site1ca said:
Last question: when you say I would have to find the stock kernel, is that just Google, or are there sites/repositories out there for this sort of thing?
Click to expand...
Click to collapse
Don't know if you'll find it anywhere cause nobody needs it.
Possible scenario
Alright, thanks for your help. I guess the one scenario that is bothering me is as follows:
1) Bell - FINALLY - releases their official Gingerbread update.
2) I've installed Hardcore kernel, which according to - http://forum.xda-developers.com/showthread.php?t=822756 - "works on all 2.2 and 2.2.1 ROMs".
3) Would I be able to install the Bell Gingerbread update with Hardcore kernel?
This is why I keep asking how I would revert from Hardcore because I obviously don't want to lock myself out of Bell updates forever.
It doesn't matter which kernel you are using when you are flashing with Odin. And Bell releases the updates later than Samsung, so you'd have the advantage of getting updates earlier with a 'free' firmware.
One solution to flash back the stock kernel is to extract the zImage (the kernel) from the stock rom and flash that with Odin or Heimdall.
But as far as I know having a custom kernel would not cause problems with installing a stock upgrade.
Done
I've installed Hardcore's kernel. Everything seems to be working fine, phone started up and picked up service.
I booted into recovery, enabled lagfix, turned on all of the recommended tweaks and then ran the Quadrant Standard. Things seem a bit faster, so I guess it's all good.
Next step, Darky's 10.1.
Thanks for your help, everyone.
One more question:
I did a Nandroid backup of everything (so data, dbdata, cache AND system). The restore option says "Be careful!". What's up with that? I mean, what's the caveat?
Thanks.
I've already made some NANDROID-backups, but never seen 'Be careful!'.
If the backup was succesful I wouldn't care about that.
*sigh*, I hate to keep adding questions on to this thread, but I must.
After installing the hardcore kernel and enabling tweaks and lagfix, I'm running into exactly this problem: http://forum.xda-developers.com/showthread.php?t=851970
My phone was extremely hot for a while, then I got a warning indicating that my internal phone storage was running low, etc.
Eventually, I found this file (/data/local/tsprsp) to be the culprit. I deleted it and rebooted and now my phone is fine. However, vibration just doesn't work at all!
Any ideas? Has anyone else run into this problem?
I was told that if you do a 'full' backup, in some cases restoration will fail with some error. But it depends on the version of the ROM you are using.
That is the reason why it is recommended to backup only data and if you want to restore, then first reflash your rom, then restore the data.
Thanks, zsori. That explains the "Be careful!".
Sent from my GT-I9000M using XDA App
After trying MIUI, a stock ROM will never touch my SGS again.
meresis said:
After trying MIUI, a stock ROM will never touch my SGS again.
Click to expand...
Click to collapse
you will have to flash back a stock rom via odin if anything wrong happen during the flashing of custom roms, although chances are low if you follow the instructions carefully.
good luck and have fun flashing custom roms!
Which Gingerbread?
So I'm continuing my quest to learn more about all of this custom ROM flashing stuff. And I wanted to get gingerbread on my phone... So I figured I'd just get an image from samfirmware.com and flash it. But then, I went here (because I was also interested in Darky's 10.1 so I was reading their guide): http://www.darkyrom.com/community/i...-darkyrom-gingerbread-jvh-noob-friendly.3080/
It says that flashing "Ficeto_JVH_I9000_Odin" will get me a stock Gingerbread. My question: what's the difference between flashing an image from samfirmware.com or flashing "Ficeto_JVH_I9000_Odin"? How do I know which to pick?
In all my browsing/reading, I realize that there are 3 "separate" parts: kernel, modem and then the "ROM". Ideally, I want to keep my modem as is... What does that correspond to in Odin? I've tried to find what "PIT", "PDA", "PHONE" and "CSC" represent in Odin, but I'm not sure I got it right. PIT = Kernel? PHONE = modem?
And finally, how do I know if a particular kernel is compatible with a particular ROM?
Sorry, I know there are lots of questions there. But please help clearing up a n00b's confusion. Thanks.
site1ca said:
So I'm continuing my quest to learn more about all of this custom ROM flashing stuff. And I wanted to get gingerbread on my phone... So I figured I'd just get an image from samfirmware.com and flash it. But then, I went here (because I was also interested in Darky's 10.1 so I was reading their guide): http://www.darkyrom.com/community/i...-darkyrom-gingerbread-jvh-noob-friendly.3080/
It says that flashing "Ficeto_JVH_I9000_Odin" will get me a stock Gingerbread. My question: what's the difference between flashing an image from samfirmware.com or flashing "Ficeto_JVH_I9000_Odin"? How do I know which to pick?
In all my browsing/reading, I realize that there are 3 "separate" parts: kernel, modem and then the "ROM". Ideally, I want to keep my modem as is... What does that correspond to in Odin? I've tried to find what "PIT", "PDA", "PHONE" and "CSC" represent in Odin, but I'm not sure I got it right. PIT = Kernel? PHONE = modem?
And finally, how do I know if a particular kernel is compatible with a particular ROM?
Sorry, I know there are lots of questions there. But please help clearing up a n00b's confusion. Thanks.
Click to expand...
Click to collapse
you got it wrong.
PIT is for mapping the partitioning of the phone. In most cases you should only use 512 pit file. and only use it when you want to wipe the phone.
the three parts is "pda" (which is the rom), "phone" (which is the modem), and "csc" (which is the carrier customization and apns)
the kernel is in the part of pda (the rom)
check the thread in xda of the kernel to see if its a gingerbread kernel or froyo kernel.
hope this clear things up
Yes, that helps. That's really good to know. So now, in Darky's guide to flashing Flash Ficeto_JVH_Odin, I see that only PIT and PDA are specified. This is reassuring, knowing that the modem and carrier stuff isn't touched.
Many thanks.
There are firmwares with three parts (Phone, PDA, CSC, including bootloader) and with only one part (PDA, no bootloader(?)). The one-part-FW is just an 'update', the one with three parts an 'upgrade'.

How to Root when you have 2.3.6, kernel LA6?

Hello I am sorry to be a nuisance but I wonder if someone could help me. I made a mistake I think in updating to 2.3.6 baseband N7000XXLA4 kernel N7000XXLA6. I have been reading the posts and as they suggest downgrade via PC Odin. My concern however is if I do this will my flash counter increase and will I get the yellow triangle?
Thanks in advance
Sent from my GT-N7000 using xda premium
When you flash any stock ROM with PC odin, it won't raise counter, nor it give triangle.
Remember, never flash any custom ROM/Kernel with PC Odin.
You are on right track, Download any older, directly rootable ROM from here and flash with PC Odin
Hijacking the thread a little bit since I noticed the Doc was here and it involves downgrading to stock ROM
I'm on a rooted LC1 rom and want to downgrade to this stock rom... http://forum.xda-developers.com/showthread.php?p=20208273
I'm downloading the file right now and have about 45min left so I don't know exactly what's inside the archive.
But... do I really need Odin to downgrade? In my case... isn't it enough to flash the rom using CWM?
Brgds... /Tubgirl
Thankyou so much for replying Dr Ketan
Sent from my GT-N7000 using xda premium
Update:
Download has finished and the file inside the archive is called N7000XBKK4_N7000OXXKK5_N7000XXKK5_HOME.tar.md5
I renamed the extension to .rar which allowed me to extract it. Inside are the following files...
boot.bin
cache.img
factoryfs.img
hidden.img
modem.bin
param.lfs
Sbl.bin
zImage
Any assistance on how to downgrade to this rom would be highly appreciated
Can it be done with CWM recovery?
Brgds... /Tubgirl
First.of all, dont manipulate qith file name.
Just extracted upto .tar.md5 is enough.
Another thing you have cwm (it needs cf root cwm, not stock recovery) then you can flash it with that, if you want to keep root intact.
You can.also use pc odin to flash any stock.ROM. With pc odin u will lose root.
Sent from my GT-N7000 using xda premium
Thanks Doc.
In my case I want to lose root because I'm sending my Note in for repair. Can I just flash with CWM recovery (choosing to flash everything including the kernel) and I'll be back to an early Stock ROM without root?
Thanks again Doc for taking your time
Brgds... /Tubgirl
Then best way to flash it with pc odin.
This will auto unroot u too.
Sent from my GT-N7000 using xda premium
Thanks again... flashing with Odin was easy and it didn't increase the counter.
Unfortunately it didn't solve the problems I'm having so I guess I have to send my Note in for repair. http://forum.xda-developers.com/showthread.php?t=1577638
Brgds... /Tubgirl
kramevans said:
Hello I am sorry to be a nuisance but I wonder if someone could help me. I made a mistake I think in updating to 2.3.6 baseband N7000XXLA4 kernel N7000XXLA6. I have been reading the posts and as they suggest downgrade via PC Odin. My concern however is if I do this will my flash counter increase and will I get the yellow triangle?
Thanks in advance
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Hi kramevans,
To ease your concern and worries, try watching this video from Ashwin:
http://www.youtube.com/watch?v=cJjh6gi0Spw
I myself had the same doubt until I watch this video and perform the downgrade and rooting, step by step...and am now on custom rom...
Regards,
SiLvErBoLd17
dr.ketan said:
When you flash any stock ROM with PC odin, it won't raise counter, nor it give triangle.
Remember, never flash any custom ROM/Kernel with PC Odin.
You are on right track, Download any older, directly rootable ROM from here and flash with PC Odin
Click to expand...
Click to collapse
Thank you doc, planning to root/flash my note to ICS. I don't know where to start(afraid in some case) to do it.
can we unroot our phone to get back warranty???
Flash any Stock ROM with PC Odin, will unroot device.
Just so I understand...
I have just bought a GN7000 off contract, so unlocked and unbranded. It has the same LA6, 2.3.6 and radio as the OP.
I've some experience with Android because I've rooted my HTC DesireHD, but not a lot. I want root to run Titanium and some other things that require root but have no real desire to flash additional roms (certainly not at the moment).
If I understand what I've read, and the sheer number of different posts and cross referencing means its hard to get a clear definitive view of what the current state of play is but as I understand it the options seem to be:
1. To root the phone without getting the warning counter you need to flash (with odin) an old samsung firmware then you can root it. If you upgrade after this you will need to wipe the phone and start again, and, you will need to use other tools too.
2. I also read of Mobile Odin and the post on that seems to indicate it can root the newer ROMs, but does it cause the warning counter to get updated or is it safe from that? Can I un-root a phone rooted in this way?
From the look of things option 2 seems the way to go, if I can understand the answers to the questions - which I can't seem to from the posts I've read.
Any help/advice would be most welcome.
Cheers
Hi guys. I’m new entry with N7000, from all point of views and I need your help.
I have this firmware on my phone: PDA N7000XXLA6; PHONE N7000XXLA4;
CSC N7000OXXLA1 (note I am from Romania – Orange carrier – and the phone is unlocked).
Before custom ROMs, I understand that I must do a downgrade.
Can you, please, tell me:
- what stock ROM should I choose (from those posted by Dr. Ketan) for downgrade?
- is it necessary to do a factory reset or any other thing before flashing stock ROM with PC Odin?
Thank you
Done it.
Thank you all for your posts.

[Q] GT-P1000 Confusion about how to install Andriod

Hi, I would love to update my GT-p1000 to ICS, I have found a whole bunch of posts about how to do this, but I can't really sort out what posts are the correct ones or where to start.
I have not updated with a custom image before so it's "clean"
I have rooted the device though, but that is about it.
Can someone guide me step by step on how to install a ICS image on this device?
tertitten said:
Hi, I would love to update my GT-p1000 to ICS, I have found a whole bunch of posts about how to do this, but I can't really sort out what posts are the correct ones or where to start.
I have not updated with a custom image before so it's "clean"
I have rooted the device though, but that is about it.
Can someone guide me step by step on how to install a ICS image on this device?
Click to expand...
Click to collapse
Hi too. Your post confuses me. I thougt almost all ICS update Q&A threads are similar and therefore correct too.
It would start by tell you there are several ICS ROMs available.. CM9, and Stimpz0r's AOKP, being the main choices.
Continuing to ask you to follow the team overcome website instructions to restock (i.e. install GB-Stock-Safe) with team overcome kernel ONLY(no need to install overcome rom)
Next would be downloading the respective .zip file from their threads, and usually ends by asking you to follow each respective install instructions on their first posts. Currently AOKP and CM9 follows a very similar install procedures.
So, all these posts similar to tbe above are all correct.
But since you are on stock and rooted, AND if you are on Gingerbread 2.3.3 or up, with JPZ modem, you can skip the restocking procedure and directly install Overcom KERNEL before flashing ICS .zip file.
tertitten said:
Hi, I would love to update my GT-p1000 to ICS, I have found a whole bunch of posts about how to do this, but I can't really sort out what posts are the correct ones or where to start.
I have not updated with a custom image before so it's "clean"
I have rooted the device though, but that is about it.
Can someone guide me step by step on how to install a ICS image on this device?
Click to expand...
Click to collapse
Do you mean
How do you put ICS into your Tab ?
First upgrade to 2.3.3 Then install cwm by using chainfire's pda and flashing it through odin 3 v1.7
http://www.4shared.com/zip/g-uW6vGt/CF-Root-TAB7_XX_OXA_JQ1-v33-CW.html
then you have to flash overcome nowipe from team overcome's site.
after that you can follow any post incluzing stimpz0r's aokp or cdesai's cyanogenmods
What about for 2.3.3 unrooted set up if would like to had an ics? Also the same cm9?
Thanks
Sent from my GT-P1000 using xda premium
Same procedure.
Install CWM by flashing a kernel that has CWM built in , like Overcome 4.0 kernel.
The exact step you can follow overcome guide.
Then boot into cwm and flash ics and gapps.
Sent from my GT-P1000 using XDA
One question from me (it's about ICS and soft modification so I allowed myself to put it here)
If I installed e.g. AOKP build 37 and I want to update it to build 38, do I need to use Recovery to install new rom only? Will it wipe my data (so I need to back it up using Titanium etc.?) or should I clean it myself? What about dalvik?
Thanks for answers!
It is OK to wipe cache and dalvik cache (some recovery just lump it as wipe cache)
I update from AOKP #37 to #38 without issue, everything intact.
Remember to flash gapps again.
But there has been at least two cases if seasoned users who got stuck upgrading and had to restock.
Just in case, copy everything from internal SD to external SD or to PC, since restock with pit file will reformat internal SD.
Edit: recovery is for flashing anything and wiping, not just for flashing new rom.
Of course it only flash zip that is packaged for flashing.
Sent from my GT-P1000 using XDA

Tab GT-P1000 Which version of Clockworkmod do I install?

Hi
I have a non branded GT-P1000 Tab. Trying to follow instructions at http://www.androidauthority.com/galaxy-tab-gt-p1000-android-4-0-4-ics-aokp-rom-97483/ to install AKOP.40 ROM
Need Clockworkmod installed.
Installed Rom Manager then attempted to install Clockworkmod - It asks me to choose my phone type. Closest options are: Galaxy Tab - ATT, Samsung Galaxy Tab - T-Mobile, Samsung galaxy tab - VZW.
What do I install, or is there another version of Clockworkmod for non Branded TAB somewhere?
Thanks ColinK
From Manager is not compatible with P1000
You may brick your device if you force install cwm recovery of different device.
The only method is to flash via Odin, a kernel that contains cwm recovery.
overcome kernel is one of them.
In fact it was recommended in all ICS rom install guide you find here.
Start here
http://forum.xda-developers.com/showthread.php?p=27500461
See my reply there.
Forget about reference to AOKP build 38, that was back then.
Download the latest.
Instruction remains the same.
Sent from my GT-P1000 using xda app-developers app
priyana said:
From Manager is not compatible with P1000
You may brick your device if you force install cwm recovery of different device.
The only method is to flash via Odin, a kernel that contains cwm recovery.
overcome kernel is one of them.
In fact it was recommended in all ICS rom install guide you find here.
Start here
http://forum.xda-developers.com/showthread.php?p=27500461
See my reply there.
Forget about reference to AOKP build 38, that was back then.
Download the latest.
Instruction remains the same.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Hi
Thanks for your prompt reply. The instructions for flashing overcome seems to have multiple steps and "IF's", with multiple opportunities to go wrong.
The android authority guide seems straightforward, and I have gone through some of it - except the guide makes no mention of how to get CWM.
Is there a simple way to get the right version of CWM installed, or something else that will do the same steps / functions.
If not, were exactly does the install part start and do I also have to install Odin?
Sorry for so many questions / uncertainty.
ColinK
As I said before.
No, there is only ONE way to get CWM recovery for P1000.
That is to flash a kernel that has CWM Recovery.
Either cf-root kernel or Overcome Kernel or Redpill kernel.
It is dead simple.
Download the tar file
Connect to Odin.
Flash.
Now, lets start by telling us what you have. P1000 running Froyo?
Rooted?
BTW, if you follow the complete Overcome guide, 99.999% you won't go wrong, if you follow every steps.
So read it 10 times if not sure.
The GB-Stock-Safe package mentioned in Overcome and available on their site, it contains the correct version of Odin (1.7) and the USB driver for Samsung.
32 bit and 64 bit driver for Windows.
Absolutely nothing else extra is needed. All there.
colink said:
Hi
Is there a simple way to get the right version of CWM installed, or something else that will do the same steps / functions.
ColinK
Click to expand...
Click to collapse
priyana said:
As I said before.
No, there is only ONE way to get CWM recovery for P1000.
That is to flash a kernel that has CWM Recovery.
Either cf-root kernel or Overcome Kernel or Redpill kernel.
It is dead simple.
Download the tar filehttp://forum.xda-developers.com/editpost.php?do=editpost&p=29235809
Connect to Odin.
Flash.
Now, lets start by telling us what you have. P1000 running Froyo?
Rooted?
BTW, if you follow the complete Overcome guide, 99.999% you won't go wrong, if you follow every steps.
So read it 10 times if not sure.
The GB-Stock-Safe package mentioned in Overcome and available on their site, it contains the correct version of Odin (1.7) and the USB driver for Samsung.
32 bit and 64 bit driver for Windows.
Absolutely nothing else extra is needed. All there.
Click to expand...
Click to collapse
Actually you can flash a CWM.zip update without installing a kernel after you root your device.
But again, installing kernel with CWM included just like Priyana said would be a lot easier and simpler.
priyana said:
As I said before.
No, there is only ONE way to get CWM recovery for P1000.
That is to flash a kernel that has CWM Recovery.
Either cf-root kernel or Overcome Kernel or Redpill kernel.
It is dead simple.
Download the tar file
Connect to Odin.
Flash.
Now, lets start by telling us what you have. P1000 running Froyo?
Rooted?
BTW, if you follow the complete Overcome guide, 99.999% you won't go wrong, if you follow every steps.
So read it 10 times if not sure.
The GB-Stock-Safe package mentioned in Overcome and available on their site, it contains the correct version of Odin (1.7) and the USB driver for Samsung.
32 bit and 64 bit driver for Windows.
Absolutely nothing else extra is needed. All there.
Click to expand...
Click to collapse
Hi Thanks for your continued help.
GT-P1000, 2.2, Baseband P1000xxjma, Kernel 2.6.32.0 [email protected]#1
The tab is completely standard, never touched until a few days ago. Followed the instrictions at Android Authority to Root using z4Root
How do I know if it is rooted? (Ie was z4 root successful).
Did Wipe Data/Factory Reset, and Wipe Cache Partition - then realised I did not have ClockworkMod recovery installed.
That is where I am now.
I hope you do not mind me asking clarifications for your instruictions. Your guide said 'jump to .. flash overconme" - where does that part start.
The quide mentions downloading a gb stock safev5.zip , an Oversome Kernel.tar and 7 series wipe.zip
Note the gb stock.zip mentions Gingerbread Based - I have Fryo (what are the implications)
But your last reply just mentions downloading the tar file and using odin
Can you see that for someone who is not familiar with all this Android jargon this is all very confusing.
I am quite competent in following instructions, but most instructions assume certain conditions (without telling me if my Tab meets those conditions), and assumes I know what eg "odin sees it" means, where is odi, where do I install it, how do I use it.
What I really want is a straightforward guide that will tell me how to install AOKP ROM Build 40 onto MY Tab, without 'go here' and 'go there' and only do this IF ...
Thanks for your help.
ColinK
Hi ColinK,
Unfortunately there is no straight way to install AOKP.
I am afraid you have to follow the guide to the letter, sort of.
This is why.
Some froyo from for our tab has locked bootloader.
So if you are on froyo there is a small chance you had a locked one.
You need to root your tab then run an app to check and to patch.
(I forgot by now whether you need root to check... to patch definitely yes)
Now, that is why Overcome guide said if froyo you need to root.
It is not strickly necessary.
Now, let's assume you don't have locked bootloader.
You only need to use Odin and flash GB stock safe v5 (which is actually Gingerbread Samsung version JQ1 Italian rom)
So, you need Odin.
Unpack the gb stock safe and you find Odin and USB driver.
Install USB driver first, then plug in your tab and your PC will detect the new device.
Unplug your device.
Install Odin.
Launch Odin, put your device to download mode and plug your device in to PC.
I am not a big user of Odin. I use heimdall in Linux which is simple and just work, so my memory is sketchy.
Odin will detect your device. There will be messages on screen.
Line up the files according to the guide and flash.
If no error your tab rebooted and you have GB ROM.
that of course isn't the end because you need cwm.
So continue with the guide.
It asks you to use Odin to flash overcome kernel tar.
Do it and you will end up having cwm recovery.
That is the end of guide.
You don't need to flash overcome rom.
Just follow my other thread reply to get AOKP.
Sent from my GT-P1000 using xda app-developers app
Addition info: The easiest way to check if you are rooted or not:
Download and install 'root check' or 'got root?' from google play store.
If the rooting failed, you can try the doomslords rooting script. It was my favorite root script up to GB2.3.3
Once you succesfully rooted, continue download the bootloader patch for froyo.
I have been on AOKP for so long, all this rooting, bootloader and all are a blur now.
priyana said:
I have been on AOKP for so long, all this rooting, bootloader and all are a blur now.
Click to expand...
Click to collapse
I can feel you. I can't even 100% remember if gb-stock-safe is pre-rooted or overvcome kernel gives root access for it.
colink said:
Hi Thanks for your continued help.
GT-P1000, 2.2, Baseband P1000xxjma, Kernel 2.6.32.0 [email protected]#1
The tab is completely standard, never touched until a few days ago. Followed the instrictions at Android Authority to Root using z4Root
How do I know if it is rooted? (Ie was z4 root successful).
Did Wipe Data/Factory Reset, and Wipe Cache Partition - then realised I did not have ClockworkMod recovery installed.
That is where I am now.
I hope you do not mind me asking clarifications for your instruictions. Your guide said 'jump to .. flash overconme" - where does that part start.
The quide mentions downloading a gb stock safev5.zip , an Oversome Kernel.tar and 7 series wipe.zip
Note the gb stock.zip mentions Gingerbread Based - I have Fryo (what are the implications)
But your last reply just mentions downloading the tar file and using odin
Can you see that for someone who is not familiar with all this Android jargon this is all very confusing.
I am quite competent in following instructions, but most instructions assume certain conditions (without telling me if my Tab meets those conditions), and assumes I know what eg "odin sees it" means, where is odi, where do I install it, how do I use it.
What I really want is a straightforward guide that will tell me how to install AOKP ROM Build 40 onto MY Tab, without 'go here' and 'go there' and only do this IF ...
Thanks for your help.
ColinK
Click to expand...
Click to collapse
Well Colink, I must say.....priyana's guides are one of the best ones for installing roms ...it's just perfect...I flashed my tab with aokp without even getting a single error....read the overcome guide perfectly ...I know it's a bit confusing but read it ten times and u will be just fine
Sent from my GT-P1000 using xda app-developers app
Overcome links are all down.
Overcome links are all down. Any alternatives? (Rooted gt-p1000 2.3.3 Gingerbread DXJPI
Come on,
a little search in overcome thread and should spot it.
Here is the spoiler
http://tabfirmware.com/2012/01/romk...e-7-series-v4-1-0-♫-overcome-kernel-v4-0-0-♫/
I too am trying to get the Tab up to ICS via the overcome procedure, links are down on overcome and not all the links on the tabfirmware are working, specifically the Overcome_Kernel_v4.0.0.zip doesn't work, with a nice <This file does not exist, the access to the following file is limited or it has been removed due to infringement of copyright.> message.
There's also the link to the full overcome site as a screen capture or something in this post http://forum.xda-developers.com/showthread.php?p=20974872, but it's now giving a 404, so my confidence level for doing this is now low ;-(
Any help appreciated. pls, pls, pretty pls.
Don't want a bricked Tab would make me sad
Here is the kernel (tar format for Odin, zip isn't the one you want I guess)
http://forum.xda-developers.com/showpost.php?p=27801159&postcount=8
and guide here
https://docs.google.com/file/d/0B7k...EyNS00Yzg5LWE0MTktYmYyMjA1MThmYzQz/edit?pli=1
I recommend first upgrading to 2.3.3, then flashing chainfire's modded cwm via odin:
http://www.4shared.com/zip/vsN8JA6x/CF-Root-TAB7_XX_OXA_JQ1-v33-CW.html
and then flashing overcome via cwm:
http://www.ravishare.com/1fragzl971e6/Overcome_7_Series_v4.1.0_NoWipe.zip.html
then you can flash any aokp or cyanogenmod mtd build.
Upgraded to ICS and thanks
Ok so thanks to all who helped out with links to roms and guides.
I now have a lovely Galaxy Tab with ICS from AOKP.
And for anyone who would like to try but hasn't yet it really is surprisingly easy, just take your time and make sure to do it right, you won't regret the upgrade to ICS
I stood on the shoulders of giants to do this :good:.
So you use the method I posted or what Gogol posted?
Sent from my GT-P1000 using xda app-developers app
ha ha
guyz i need help in installing cwm in my rooted galaxy tab p1000 running 2.2 froyo

[Q] Captivate 2.2 Froyo to X-Bean

Re: [ROM][4.1.1][PORT] X-Bean **2.0** (fast, stable & superfunctional)
Been browsing for an update on AT&T Captivate SGH-I897 Froyo 2.2 and now on T-Moble
Unlocked, rooted with SOC and CWM recovery..
Read thru development on X-Bean **2.0**
Understood to get: x-bean 1.1Base.zip / gapps-jb20121011-signed.zip / BUT not sure which kernal!!
Early the thread states Devil 1.0.4vc but most recently suggests alternative of semaphore 2.0.3c.
Am I correct in thinking both work, just the semaphore is newer?
Thanks
Tyannt said:
Re: [ROM][4.1.1][PORT] X-Bean **2.0** (fast, stable & superfunctional)
Been browsing for an update on AT&T Captivate SGH-I897 Froyo 2.2 and now on T-Moble
Unlocked, rooted with SOC and CWM recovery..
Read thru development on X-Bean **2.0**
Understood to get: x-bean 1.1Base.zip / gapps-jb20121011-signed.zip / BUT not sure which kernal!!
Early the thread states Devil 1.0.4vc but most recently suggests alternative of semaphore 2.0.3c.
Am I correct in thinking both work, just the semaphore is newer?
Thanks
Click to expand...
Click to collapse
They both work. Just make sure you get the right version.
BWolf56 said:
They both work. Just make sure you get the right version.
Click to expand...
Click to collapse
Appreciate the reply BWolf56!
I will be sure to use either the kernals with the "c" suffix as suggested in the original thread!
NOW! Trying to decide on the best Backup App..
Tyannt said:
Appreciate the reply BWolf56!
I will be sure to use either the kernals with the "c" suffix as suggested in the original thread!
NOW! Trying to decide on the best Backup App..
Click to expand...
Click to collapse
TiBu is my personal fav.
UPDATE... Again, thanks BWolf56!
AT&T Captivate on FROYO 2.2. OneClickRoot, CWM Recovery V2.5.1.2
Did ROM backup, TiBu backup, EFS, APN, Contacts etc
Installed/Flashed:
ROM X-Bean1.1 base.zip
gapps-jb-2012101-signed.zip
Semaphore_jb_2.0.3c.zip
landscape_fix.zip
Phone booted up fine initially, would always revert to landscape view, back button was now the home button.
Could not find any of my backups. "UI" kept crapping out; "Unfortunately UI is not responding" Think that's what it said!
Had to click OK and it was back until i touched anything and kept happening...
Did Advanced Restore -> CWM Recovery of: System, Data, Cache, ext/sd
Phone rebooted.... Stuck on AT&T logo screen, charging pinwheel shows but doesn't move.
Cannot get into recovery.. managed to get into "dowload mode"
tried i897UCJF6-final-OCD-REVO.zip loaded on computer, phone connected in download mode,
loaded PIT file only as the zip had no PAD file....... NO SUCCESS
If I proceeded in a NOOB fashion, it's because I am so I'll take my licks Lol
Any help would be appreciated!
Figured it best to just get back to stock 2.2, maybe even earlier since I wouldn't have the 3e recovery
problem not being able to install from OTHER sources. Then TRY again after brushing up!!!!!!!!
Tyannt said:
UPDATE... Again, thanks BWolf56!
AT&T Captivate on FROYO 2.2. OneClickRoot, CWM Recovery V2.5.1.2
Did ROM backup, TiBu backup, EFS, APN, Contacts etc
Installed/Flashed:
ROM X-Bean1.1 base.zip
gapps-jb-2012101-signed.zip
Semaphore_jb_2.0.3c.zip
landscape_fix.zip
Phone booted up fine initially, would always revert to landscape view, back button was now the home button.
Could not find any of my backups. "UI" kept crapping out; "Unfortunately UI is not responding" Think that's what it said!
Had to click OK and it was back until i touched anything and kept happening...
Did Advanced Restore -> CWM Recovery of: System, Data, Cache, ext/sd
Phone rebooted.... Stuck on AT&T logo screen, charging pinwheel shows but doesn't move.
Cannot get into recovery.. managed to get into "dowload mode"
tried i897UCJF6-final-OCD-REVO.zip loaded on computer, phone connected in download mode,
loaded PIT file only as the zip had no PAD file....... NO SUCCESS
If I proceeded in a NOOB fashion, it's because I am so I'll take my licks Lol
Any help would be appreciated!
Figured it best to just get back to stock 2.2, maybe even earlier since I wouldn't have the 3e recovery
problem not being able to install from OTHER sources. Then TRY again after brushing up!!!!!!!!
Click to expand...
Click to collapse
Did you flash a I9000 ROM? If so, you need the I9000 bootloaders.
Also to downgrade android version, you have to use Odin (i suggest kk4 without bootloaders if you already have the gb ones, which can be found in the stickies).
Make sure you follow the full instructions next time to avoid issues like that.
Sent from my SGH-I747 using xda app-developers app
BWolf56 said:
Did you flash a I9000 ROM? If so, you need the I9000 bootloaders.
Also to downgrade android version, you have to use Odin (i suggest kk4 without bootloaders if you already have the gb ones, which can be found in the stickies).
Make sure you follow the full instructions next time to avoid issues like that.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
---------------------------------------------
Ahhh, fello Canadian i see!
You may be correct thinking i have I9000 "JB"? bootloaders!, in the original
thread : Aceofspades replied to a member question stating: "Port means that this
rom is originally made for i9000 and made it to work for captivate."
Should I assume I've flashed an I9000 Rom? and now have JB bootloader?
Thinking back, I did not wipe before going back and using recovery! Not sure that was the problem
but it was on reboot after restoring CWM/system. data. cache etc that the phone rebooted and ended up
in a continual cycling of the ATT logo screen!
Big question now is how do I do to remedy my situation!!
NOTE...I have made a JIG and can get into "download Mode" now
From this point on I'll document my every move in order to be able to provide
the exact procedure I went through... might be more helpful !!
I know I know... NOOB! Lol
PS, is an alternative to use Kies Mini and update to Gingerbread?
Tyannt said:
---------------------------------------------
Ahhh, fello Canadian i see!
You may be correct thinking i have I9000 "JB"? bootloaders!, in the original
thread : Aceofspades replied to a member question stating: "Port means that this
rom is originally made for i9000 and made it to work for captivate."
Should I assume I've flashed an I9000 Rom? and now have JB bootloader?
Thinking back, I did not wipe before going back and using recovery! Not sure that was the problem
but it was on reboot after restoring CWM/system. data. cache etc that the phone rebooted and ended up
in a continual cycling of the ATT logo screen!
Big question now is how do I do to remedy my situation!!
NOTE...I have made a JIG and can get into "download Mode" now
From this point on I'll document my every move in order to be able to provide
the exact procedure I went through... might be more helpful !!
I know I know... NOOB! Lol
PS, is an alternative to use Kies Mini and update to Gingerbread?
Click to expand...
Click to collapse
First thing: don't use kies at all!
There are no JB bootloaders for the cappy, just eclair, froyo and GB. If the ROM is a port, you'll most likely have to flash the I9000 gb bootloaders but I'd suggest finding another ROM to start with (like CM). Playing with bootloaders is the only thing that will make your phone a paper weight if something goes wrong.
Also, bootloaders aren't included in roms for safety measures. That being said, you can run ICS and JB roms just fine with the GB bootloaders.
As for what comes next. Perhaps use Odin to flash stock kk4 without bootloaders, from there flash corn kernel (once again with Odin) and give CM a whirl following their full flashing instructions. (Which can be found both in their thread and website)
Sent from my SGH-I747 using xda app-developers app
Understood... NO KIES
Sorry but a little confused still...
Do I Odin flash KK4 w/o bootloaders first -> flash corn kernal with Odin -> then flash a CM ROM using their procedure?
Where in the sequence is "flash I9000 bootloaders?
* No luck finding Odin w/o bootloaders yet, outdated download sites. Will search through xda again.
Noted! "There are no JB bootloaders for the cappy, just eclair, froyo and GB." (I was originally ATT captivate on FROYO 2.2)
Noted! "bootloaders aren't included in roms for safety measures." "you can run ICS and JB roms just fine with the GB bootloaders."
As for what comes next. Perhaps use Odin to flash stock kk4 without bootloaders, from there flash corn kernel (once again with Odin) and give CM a whirl following their full flashing instructions. (Which can be found both in their thread and website)
I might be a little hazy on the order of your suggestions so thanks for the patience!
GREATLY APPRECIATING YOUR EFFORTS!!
Tyannt said:
Understood... NO KIES
Sorry but a little confused still...
Do I Odin flash KK4 w/o bootloaders first -> flash corn kernal with Odin -> then flash a CM ROM using their procedure?
Where in the sequence is "flash I9000 bootloaders?
* No luck finding Odin w/o bootloaders yet, outdated download sites. Will search through xda again.
Noted! "There are no JB bootloaders for the cappy, just eclair, froyo and GB." (I was originally ATT captivate on FROYO 2.2)
Noted! "bootloaders aren't included in roms for safety measures." "you can run ICS and JB roms just fine with the GB bootloaders."
As for what comes next. Perhaps use Odin to flash stock kk4 without bootloaders, from there flash corn kernel (once again with Odin) and give CM a whirl following their full flashing instructions. (Which can be found both in their thread and website)
I might be a little hazy on the order of your suggestions so thanks for the patience!
GREATLY APPRECIATING YOUR EFFORTS!!
Click to expand...
Click to collapse
For now, forget about the I9000 bootloaders.
Here's KK4: http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
During your flashing, did you ever flash the GB bootloaders? If not, get the version with bootloaders and make the the flashing isnt't interrupted.
And yeah, from there you got it right, corn kernel; and follow their full flashing instructions.
BWolf56 said:
For now, forget about the I9000 bootloaders.
Here's KK4: http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
During your flashing, did you ever flash the GB bootloaders? If not, get the version with bootloaders and make the the flashing isnt't interrupted.
And yeah, from there you got it right, corn kernel; and follow their full flashing instructions.
Click to expand...
Click to collapse
--------------------------------------------------
* I haven't knowingly flashed GB bootloaders.
* I've been all over the link you provided... no working downloads.
Hmmm, I did try "Odin" a couple of times to get the GingerBread update...After doing that my phone now
boots to the AT&T logo, goes black for a sec and a screen like a bad tv signal comes up! Also, the phone
is now charging and showing the big battery icon! I seem to recall reading somewhere that if that happens
it may be wrong bootloaders? Can't remember exactly what it said but am I correct thinking it was one of
your own replies to another member?
Anyway, done for the night Grrrr
Thanks so much!
Here is a post with a pic about the screen u r seeing. Pixelated screen means u don't have the GB bootloaders... http://forum.xda-developers.com/showpost.php?p=33227557&postcount=2
And i am currently in the process of uploading my Odin and Heimdall Stock KK4 One Clicks. Gonna be using MediaFire. Will post when all uploads are done and new links attached to my post #3 in the Stock Rom stickied thread in the Development forum...
Fixin to crash for the nite. But will get it done asap.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
4-2ndtwin said:
Here is a post with a pic about the screen u r seeing. Pixelated screen means u don't have the GB bootloaders... http://forum.xda-developers.com/showpost.php?p=33227557&postcount=2
And i am currently in the process of uploading my Odin and Heimdall Stock KK4 One Clicks. Gonna be using MediaFire. Will post when all uploads are done and new links attached to my post #3 in the Stock Rom stickied thread in the Development forum...
Fixin to crash for the nite. But will get it done asap.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
-------------------------------------------------------------------------------------------
Appreciate you taking the time to reply! The images you displayed are exactly what I am seeing..
Links aren't good forever, i realize that just hard to believe I hadn't found them ANYWHERE yet! Lol
PS ************
* Have since got GB Bootloaders and added thru Odin3 v1.70.. PDA.tar.md5
* Now able to get into recovery mode by 3-button, shows 3e recovery, have ability to install from sdcard,
wipe data/factory reset, wipe cache partition.
* I have an "update.zip" on there but can't remember what it's for so I didn't do it...
but still no UI coming up, just the AT&T logo which cycles ON/OFF
Am I still in the same boat... needing KK4 Odin flash, after doing that will i be able to copy
a KK4 ROM zip to my phone thru PC and flash from the phone?
Tyannt said:
-------------------------------------------------------------------------------------------
Appreciate you taking the time to reply! The images you displayed are exactly what I am seeing..
Links aren't good forever, i realize that just hard to believe I hadn't found them ANYWHERE yet! Lol
PS ************
* Have since got GB Bootloaders and added thru Odin3 v1.70.. PDA.tar.md5
* Now able to get into recovery mode by 3-button, shows 3e recovery, have ability to install from sdcard,
wipe data/factory reset, wipe cache partition.
* I have an "update.zip" on there but can't remember what it's for so I didn't do it...
but still no UI coming up, just the AT&T logo which cycles ON/OFF
Am I still in the same boat... needing KK4 Odin flash, after doing that will i be able to copy
a KK4 ROM zip to my phone thru PC and flash from the phone?
Click to expand...
Click to collapse
KK4 is a one click Odin.
From there, you'll have to use Odin 1.85 or 1.87 to flash Corn kernel to be able to flash your way up to CM.
BWolf56 said:
KK4 is a one click Odin.
From there, you'll have to use Odin 1.85 or 1.87 to flash Corn kernel to be able to flash your way up to CM.
Click to expand...
Click to collapse
Hey there!
* 4-2ndtwin chimed in and said he would post when he uploaded them.
Been looking in the meantime.
* I have both Odin versions, now understand that I can use Odin to flash any file I choose, such as the Corn kernal, not just files it may come with.
* I downloaded a "Stocki897uckk4-zImage.tar, unzipping shows "zImage" file but I
haven't touched it.
Just hanging in for a working link for the Odin KK4 One-Click I guess...
Question!!!
For clarification..Odin KK4 One-Click is just bootloaders, kernal and maybe modem, right? It's not going to give me a working ROM...OR, is it ALSO an alternative way to flash a ROM when I can't add a ROM zip to my phone thru my PC to flash?
Lol... I'll get a handle on this, more of a visual type
As usual, appreciate the help!
Stock KK4 Links up.
...Aaannnd we're back !!!
Links up and going !!!
Stock I897UCKK4 Android 2.3.5 One Clicks *Heimdall and Odin*
4-2ndtwin said:
...Aaannnd we're back !!!
Links up and going !!!
Stock I897UCKK4 Android 2.3.5 One Clicks *Heimdall and Odin*
Click to expand...
Click to collapse
----------------------------------------------------------
HUGE THANKS! , downloading now... Will update
Got my fingers crossed
##### UPDATE #####
Used: I897uckk4 Odin One Click-Stock,NO Bootloaders, Re-partition, Full Wipe.zip
UCCK4 v2.3.5 loaded, running and stable, not rooted.
Time for a break!
Thanks again guys!
Tyannt said:
----------------------------------------------------------
HUGE THANKS! , downloading now... Will update
Got my fingers crossed
##### UPDATE #####
Used: I897uckk4 Odin One Click-Stock,NO Bootloaders, Re-partition, Full Wipe.zip
UCCK4 v2.3.5 loaded, running and stable, not rooted.
Time for a break!
Thanks again guys!
Click to expand...
Click to collapse
From here, it should be a breeze. Just remember to follow the full flashing instructions :good:
BWolf56 said:
From here, it should be a breeze. Just remember to follow the full flashing instructions :good:
Click to expand...
Click to collapse
Still browsing ROMS...
Should I be bothered rooting yet? Not sure if I'll just have to do it again after a ROM switch?
Any suggestions for a root utility?
Tyannt said:
Still browsing ROMS...
Should I be bothered rooting yet? Not sure if I'll just have to do it again after a ROM switch?
Any suggestions for a root utility?
Click to expand...
Click to collapse
I suggest you start with CM.
As for rooting, you can get it directly on the store now (was recently made legal). I believe it's by chainfire. But do you need it atm?
Also, all custom roms come pre-rooted.
Sent from my SGH-I747 using xda app-developers app

Categories

Resources