Running CM3.6.5 and cannot get the wifi to work. When I turn it on after a few seconds it says "Disconnected" right underneath it.
On the wifi networks I try to connect to my home router but it doesn't do anything. the signal strength:excellent securitypen, i hit the connect button but nothing.
I've turned off and on the wifi with no luck. Been searching for help but can't find any. If this has happened to you and you've fixed it let me know how i can do this.
Thanks!~
Have you only had this problem on one network? At work, every few days I loose my connection to our Linksys. A coworker's iPhone also fails to connect, but another coworker's Dell laptop can connect fine. Watching logcat I can see it attempting to connect, then spitting out an authentication failure error.
Restarting the Linksys seems to solve the problem. Not sure what is special about the two phones that makes everything crap out.
the only wifi network i use is my home one right now. haven't thought about restarting it. gonna do it and hopefully that will be the fix i've overlooked ><
/slaps his forehead.....
restarted my router and that fixed the problem. for some reason i've never had to do this but now i know.
thanks for the post! wifi working now.
Glad that helped. I'm still a little stumped about why it's doing this, but it sounds like we have the same issue. Restarting the router is easy enough though.
Now at home, I have a Linksys running Tomato firmware, and it never boots either of the two G1s we have. So it's just the stock router firmware for me, and it only affects G1s and iPhones (or at least, it affects them and not a laptop with Intel wireless).
i am having the same issue. does anybody knows if its a rom problem? I am running cyanogen 4.3.1. in college, where my laptop can connect fine, the g1 can not, and has a very low signal level while laptop shows excellent.
I have a Samsung Galaxy S Vibrant device and a strange Wi-Fi connection problem.
It seems that the WiFi conneciton is being lost intermitently with no apparent reason. I ping the device, most of the time there is a 'Request timed out' and only sometimes a 'Reply from <address>'.
On the device side the connection behaves erratically as well, sometimes there is connection but most of the times there isn't. The strange thing is that under device's Settings->Wireless and network->wi-Fi settings the connection's status is "Connected" all of the time, signal strength is excellent, link speed is 54Mbps.
I had this issue on a native 2.1 Samsung Galaxy S Vibrant install, then decided to flash a custom 2.2 ROM hoping to end the mistery. The new custom ROM is an Axura21VE.zip and the WiFi connection problem is exaclty the same as before.
Does anyone have the same WIFi issue as I have? And yes, I did a search before posting this. In fact, I searched for several weeks and saw many SGS Wi-Fi problems being reported but either they are different or they are similar to mine with no solution. Since I need a stable Internet connection on the device for app development, next logical step would be looking at reverse USB tethering. Yet decided to post here before giving up on Wi-Fi.
For the record, the Wi-Fi acces point is under my control, i have a ASUS P5B-MX/WiFi i946GZ motherboard, windows XP sp3. I tried, I think,
every possible combination of Wi-Fi settings available. The only client device I have at home is SGS. At the office network, SGS is having the same
Wi-Fi issues, while a HTC Desire and many laptops don't.
here is what I just found out: if I do a constant ping form the device to google.com for example, then the conenciton is maintained all right. So, should I constantly ping something to maintain a decent connection? Is there a setting or something in Android OS I am missing?
I had this exact problem - changed my router and it works perfect now. Really weird and not an ideal solution but worked for me so far (touch wood!). Try playing about with your wifi config maybe, change encryption, channel etc. Good luck.
Hi, I'm having the same problem on my Galaxy S i9000 on Darkyy's v7.8. I never used to have this problem until I flashed the second to last release. The device says I'm connected to the network but I can't get any internet access. I tried reflashing my official firmware DXJPA, but I still no joy. I'm not really sure what to do.
YES... i have been searching for days. I feel I may have a similar issue. im connected, speed good, IP there.. no data, browser just hangs. seems to happen less in stock. (Rogers captivate, P10.1) also WiFi manager reads my WiFi channel off by 2!! so im set to use ch 9 on the router and WiFi manager on the captivate says its broadcasting on ch 7?? any ideas? ping to infinity??
side note: this happens on all routers and all roms. other galaxys on my network read proper ch... GF's Iphone see the right channel?? HELP..
I'm also having these problems, reposting my reply from another forum:
Just wanted to chime in that I am also having these problems with my samsung vibrant. Seems to only happen from my work router but happens very consistently. Wifi will work immediately after setting it up but after a short time period will stop working completely. It will say it is still on wifi but will in fact have no access to the local network or the internet. Stopping/restarting the wifi connection doesn't fix it. The router has to be manually 'forgotten' and then re-added for it to begin working again. (Update: sometimes this does not work either, in fact).
This is with a 2wire modem (standard issue by at&t) using WEP security in 802.11b/g mode.
Some people recommended switching from 201.11b/g to pure 201.11g. I tried this with no luck. It was also recommended to try to app 'wifi fixer'. This also did nothing to solve the problem. Given that it is my work router, I don't want to go changing the encryption and other crazy things as I'm not the only person using this router and it would break the connection for others.
MRSizzle in another thread (which xda isn't allowing my to link to) seemed to accurately describe the problem as such:
"It appears to be a driver issue with the Samsung base OS drivers in the phone. Possibly sleep policy is not operating correctly and the wifi radio is being disabled by the hardware and is not being controlled correctly by the software so the WiFI icon still appeers to indicate the phone is connected. Also the wifi signal is not being correctly reported. the signal appears to be attenuated more than it really is."
This description would line up with the OP's reports that repeated pinging will keep the connection alive.
Hi, I'm having the same problem on my Galaxy S i9000 on Darkyy's v7.8. I never used to have this problem until I flashed the second to last release
ASK DARKY its his rom and will know more .
jje
Anyone figure this out? I'm trying to use the Web Desktop app but can't because I can't even establish a connection with my phone!
Hi friends,
I have similar problem, but at first I easilly connected to Internet, but now I can connect to my WI-FI but no internet connection. I am not sure but maybe this has occur after updating to Android 2.2.
Any suggestion?
Thanks in advance.
explanation and apology
I was wrong in my assumption that it's an Android device problem. The problem was in the Asus motherboards embedded Wi-Fi access point. I bought a separate Wi-Fi router and now everything works like a charm.
Hi folks
Since I updated to JellyBean (JellyMod currently) I have an issue with my wifi connection.
It shows connected but i cant transfer any data (every app fails to establish a connection) until I turn off the wifi and turn it on again. then it ill work for some time and fails again after a not defined period of time.
I found a lot of threads regarding similiar problems but I did not find a solution yet (and for me having a rooted phone installing an app that that runs in background like wifi fixer is a workaround, not a fix
I already did a complete factory reset and fresh install of jellymod.
My router at home is a netgear wndr3700 with the latest dd-wrt. all my other devices work great.
I set the wifi of my i9070 to always on. also i installed auto wifi for location based wifi on/off-profiles.
all of this worked with gingerbread, never had problems...
any idea? seems like a lot of galaxy phones and even tabs are affected...
Thanks in advance!
So i have ViperOne 4.1.0 running with Elemental X 10.8 kernel for over a week now. Everything was working fine up until yesterday when suddenly my phone cannot get an external IP address on my Wifi at home anymore. It connects fine to the Wifi itself however it cannot get any internet connection.
I have reset my router, modem, phone and nothing has worked. Other devices in my home which connect to the same wifi get internet connection just fine only my HTC One does not. Mobile data connection works fine btw.
Whats really puzzling to me is that really i have changed nothing on my phone in the last couple of days and not all of a sudden its simply not working so i'm grasping at straws here...
Anybody experiences similar issues or have any ideas what else i could still try to fix this?
Thanks
Well it turns out that changing the Wifi channel on the router from auto (was actually 9) to 11 in my case solved the problem. Weird ****...
Sent from my HTC One using xda app-developers app
Hello.
I am using my I9000 for a good while now and i am running cm11-20150901-SNAPSHOT-XNG3CAO3G0-galaxysmtd. Everything was running fine so far, but suddenly for some days now, the WIFI connection somehow gets lost when it's idle.
When this happens (and i don't know on what timeframe it does) and i activate the phone (pressing the home button) the WIFI symbol is either shown and then disappears or is already gone - but then after some seconds comes back and WIFI is on again.
Yes, i do have the setting for standby WIFI on always, so this should not happen.
Does anyone have an idea what could be the problem here?
Also i do have a fritz.box 7390 which supports a 5GHZ network - does the I9000 support a 5GHZ wifi? Maybe it's the router that's causing the issue an switching to the 5GHZ might fix it - but so far i could not see the network when it's on 5GHZ.. So i guess it's not supported but thought i might ask anyways...
Thanks!