Database Develop

WLAN 5GHZ support

Hi,
is there a possibility to have wlan in 5ghz mode working. I think WLan-N with only 2,4 ghz is useless.

it only uses 2.4 Ghz
i have a Linksys 610 and i have both WN set to N only, but the SGS can only see the 2.4 one, while my laptops and computers can see both the 5.0 + 2.4

I'm Sad.
Is there a way to improve wireless reception capability of the Galaxy S?
It is much bader than my win mobile HTC Touch Cruise.

as far as i know the 5.0 Ghz vs. 2.4 Ghz WiFi signals are hardware based, not software
else Linksys, Dlink, 3Com, Cisco, Belkin and other WiFi makers will not be having so much trouble making more 5.0 Ghz units
5.0 Ghz hardware is almost more expensive than the 2.4 Ghz on computers

Polarfuchs said:
Is there a way to improve wireless reception capability of the Galaxy S?
Click to expand...
Click to collapse
It's a complicate matter, but in certain circumstances you might get better coverage using g-only wireless network (g/b mixed might work as well). Test it.
Newer ROMs might offer some WLAN improvement also.
Wireless repeaters/range extenders are another option.

[Q] Can a Nook do better than 54 mbps Connection

Wondering if there is anything that can be done to get a Nook to connect at faster than 54 mbps G speeds? Does it really have a N wireless chip? I have searched and searched and cant find an answer to this.

According to the spec sheet, the wireless radio chip does support N. I'm not sure whether the software supports it
Radio: Chip ID Ti wl1271 (kernel reports wl1273) Chip supports bluetooth transmit/recieve and fm radio functions through the same antenna, but is not enabled in software drivers. Connectivity: 802.11b/g/n Security: WEP/WPA/WPA2/802.1x Mode: Infrastructure
Click to expand...
Click to collapse

I get N connectivity via CM7 - been so long since I ran stock that I don't recall.
Rodney

Yamadog, do you currently have a n router that you are trying to connect too?
I've read before that the Nook Color wifi chip only supports 2.4 GHz range (which is used for both 11g and 11n) but not 5 GHz range (which is only for 11n). If you have a b/g/n/ router running in compatibility mode for all three types then it might possibly be doing 11n only at 5 GHz and 11b/g only at 2.4 GHz and so your Nook would never be able to see the 11n signal. Try putting your router in 11n-only mode and see what happens

I'm on CM7 and I've never seen a rate above 54mbps regardless of N availability.

boomn said:
Yamadog, do you currently have a n router that you are trying to connect too?
I've read before that the Nook Color wifi chip only supports 2.4 GHz range (which is used for both 11g and 11n) but not 5 GHz range (which is only for 11n). If you have a b/g/n/ router running in compatibility mode for all three types then it might possibly be doing 11n only at 5 GHz and 11b/g only at 2.4 GHz and so your Nook would never be able to see the 11n signal. Try putting your router in 11n-only mode and see what happens
Click to expand...
Click to collapse
I have no problem with the connection its just it connects at only 54 mbps which limits download speeds to around 11 mbps Max. My computers connect at 270 to300 mbps at download at my full 24 mbps speeds. I did have a g only router and it limited my computers to only 11 mbps like the nook. Aipparently the g rating of 54 mbps is just under ideal lab conditions and not really obtainable.

According to my home N router, the Nook Color connects at 54mbps but N is in use. For some reason that is the max rate it will use. I've seen this happen with other N devices when WMM is disabled on the client.

Whoa sorry never really answered you. My router is a cheapo 2.4 ghz n but it does allow 300 mbps connections. I have to run it in b,g,n mode because our wii is only g wifi.

swaaye said:
According to my home N router, the Nook Color connects at 54mbps but N is in use. For some reason that is the max rate it will use. I've seen this happen with other N devices when WMM is disabled on the client.
Click to expand...
Click to collapse
I bet that's the case with mine too, but I haven't checked. It does pick up signals like its running n though.

boomn said:
Yamadog, do you currently have a n router that you are trying to connect too?
I've read before that the Nook Color wifi chip only supports 2.4 GHz range (which is used for both 11g and 11n) but not 5 GHz range (which is only for 11n). If you have a b/g/n/ router running in compatibility mode for all three types then it might possibly be doing 11n only at 5 GHz and 11b/g only at 2.4 GHz and so your Nook would never be able to see the 11n signal. Try putting your router in 11n-only mode and see what happens
Click to expand...
Click to collapse
802.11n operates on both 2.4GHz (20MHz bandwidth) and 5GHz (40MHz bandwidth).
Anyway, how do you guys check out the rate on the NC?

votinh said:
802.11n operates on both 2.4GHz (20MHz bandwidth) and 5GHz (40MHz bandwidth).
Click to expand...
Click to collapse
I know, but I've heard of routers that do compatibility mode by segregating g and n between the 2.4 and 5 GHz antennas

votinh said:
802.11n operates on both 2.4GHz (20MHz bandwidth) and 5GHz (40MHz bandwidth).
Anyway, how do you guys check out the rate on the NC?
Click to expand...
Click to collapse
Didnt realize all n routers did this. Checked mine and it shows my computer on 40 mhz and Nook on 20.
To check Nook connection link speed just click on the connected network and it lists all info for it.

swaaye said:
According to my home N router, the Nook Color connects at 54mbps but N is in use. For some reason that is the max rate it will use. I've seen this happen with other N devices when WMM is disabled on the client.
Click to expand...
Click to collapse
I checked and did not have WMM enabled on my router. Enabled and although the connection speed still says 54 mbps, I recorded much higher, sometimes double, the download speed vs WMM turned off. Thanks! It might be a fluke but the speeds were not far off my desktop.

Actually it is a fluke. All along I have been using the android app for speed test to check my nook and it shows roughly half the speed vs the regular desktop speed page of speed test. Oh well at least I know I'm getting all the speed out of it.

fyi the Wifi chip is capable of up to 65mbps. I've seen this rate from other tablets with TI WLAN chips on my router. I haven't a clue why the Nook Color won't go that high. Not on any N router I've connected to.
I even took a look at the tiwlan.ini file but I don't see anything apparent in there. N appears to be enabled.

Does the HD7 really do 802.11n?

Until recently I was using Connectify to set up a home wifi hotspot for my phone (TMOUS HD7, running 7720 with the latest T-Mobile/HTC firmware) to use. Yesterday I installed a router instead, which has allowed me to play with more network settings.
If I set the router to 802.11n-only, my HD7 can see it but can't connect. If I set it to 802.11g-only, everything works fine. Has anyone actually confirmed that the HD7 can do "n"?

my home wifi network is "n" and both my hd7's connect to it fine.

I have forced the n-mode, no problems connecting

Yep, Wireless N works perfectly fine here

Which 802.11n are you talking about? 2.4Ghz works but 5Ghz won't. so it only does draft n not full 300mbps 5ghz 802.11n

You are comparing two different things, WLAN standard has nothing to do with frequency, HD7 follows IEEE802.11b/g/n standard operating on 2.4 GHz with 20/40MHz bandwidth, allowing maximum throughput of 150Mbps. It is capable of DSSS and OFDM modulation, and is also capable of operating in dualband mode, which allows it to connect to 2.4 GHz and 5GHz IEEE802.11a/b/g/n networks, this is however up to the OEM to enable this feature, this is not the case for HD7, or any WP7 device out there.

Snake. said:
You are comparing two different things, WLAN standard has nothing to do with frequency, HD7 follows IEEE802.11b/g/n standard operating on 2.4 GHz with 20/40MHz bandwidth, allowing maximum throughput of 150Mbps. It is capable of DSSS and OFDM modulation, and is also capable of operating in dualband mode, which allows it to connect to 2.4 GHz and 5GHz IEEE802.11a/b/g/n networks, this is however up to the OEM to enable this feature, this is not the case for HD7, or any WP7 device out there.
Click to expand...
Click to collapse
Draft-n was 2.4ghz 150mbps was it not? where as full rate 802.11n is 300mbps and operates at 5ghz?!

Well, yes and no, 802.11n is capable of data rates up to 600 Mbit/s, those are achieved only with the maximum of four spatial streams using a 40 MHz-wide channel. However, when in 2.4 GHz enabling this option takes up to 82% of the unlicensed band, which in many areas may prove to be unfeasible. I don´t have device which is able to be set to achieve this limit (2.4GHz / 40MHz with 400ns Guard Interval), so I can´t test it. Do you have internet connection that requires such a high value?

Snake. said:
Well, yes and no, 802.11n is capable of data rates up to 600 Mbit/s, those are achieved only with the maximum of four spatial streams using a 40 MHz-wide channel. However, when in 2.4 GHz enabling this option takes up to 82% of the unlicensed band, which in many areas may prove to be unfeasible. I don´t have device which is able to be set to achieve this limit (2.4GHz / 40MHz with 400ns Guard Interval), so I can´t test it. Do you have internet connection that requires such a high value?
Click to expand...
Click to collapse
lol personally now i don't my links is 17mbit but i like the 300mbps for video streaming and file transfers, if only i had an access point with a gigabit lan interface haha

[Q] Slow Internet Speed on Wifi Nokia Lumia 1520

I am facing a slow speed using wifi on the lumia 1520. For sure there is something wrong with the wireless card or the drivers.
1. The internet speed while connected to wireless that i get on the 1520 is half or even more less than what i get on my desktop (connected wirelessly) or on my other phones (both being android). I get a 25Mbps download & upload both on the computer as well as on both the android phones. But on the Lumia it will hardly even cross 10Mbps for download and 16 Mbps for upload.
The issue with the speed is really strange because if i connect the phone to a 2.4 Ghz network i get upto 10 Mbps download and 16 Mbps upload speed.But if i connect the phone to a 5 Ghz N network then the download speed i get is 0.67 Mbps and upload 14 Mbps. Whereas both my androids have a download and upload speed of 25 Mbps no matter whether connected to a 2.4 Ghz or 5 Ghz network.
I have changed different channels on the router and have almost everything including resetting the router as well as resetting the phone but no luck. The phone is OOB lumia black OS.
Any ideas anyone.

What router do you have? My internet speed is 55mb down and 6mb up. I get 56 to 58 down and 6 to 7 up on my phone. I have an Asus AC1900 router. This phone has been one of the better phones I have owned when it comes to WiFi speed.
Sent from my RM-940_nam_att_200 using Tapatalk

TechSilver13 said:
What router do you have? My internet speed is 55mb down and 6mb up. I get 56 to 58 down and 6 to 7 up on my phone. I have an Asus AC1900 router. This phone has been one of the better phones I have owned when it comes to WiFi speed.
Sent from my RM-940_nam_att_200 using Tapatalk
Click to expand...
Click to collapse
I have a netgear wndr 3700v2 router . I was able to resolve the 0.67 Mbps speed issue on the 5Ghz N channel by enabling WMM on the 5 GHZ channel however still the speeds are half of what is the internet connection speed.
The surprising part is that after enabling WMM the speeds on the note 2 when connected to the 5 Ghz N channel reach the proper internet speed as on a wired ie:- 39 Mbps but on 1520 they hardly cross 15 Mbps download .On the note 2 or my other android as well as my desktop the download and upload speed is proper on both the channels 2.4 as well as 5 Ghz. This indicates tht the router is fine.
I think i have to contact nokia support to have this checked. I am not sure as to what else to apart from this.

Same issue on a N97, wifi is muuuuuuuuuuuuch slower than 3G. Some messages I got about certificates let me suspect the preinstalled Boingo appli. All worked fine on my previous 5730.

WiFi bandwidth? 5Ghz vs 2.4Ghz - how to test which is better?

After recently upgrading my family's phone's, we all now have 5 Ghz Wi-Fi capable devices, so I got a dual band AC 5 Ghz Asus router.
My broadband is rated at 20mbps down...ok, so testing with ookla speed test I'm getting the same transfer rates on either of the Wi-Fi bands (2.4 Ghz or 5Ghz)
I thought I read somewhere 5 Ghz is what you want, and should select that one....but now I'm understanding it has much less range but more bandwidth, but if I'm maxing out my 20m connection at 2.4 Ghz, what is the advantage of 5 Ghz?
(I hope this makes sense to someone who can reply)

5ghz is better if you are struggling with 2.4. Depends on how many mouths you are feeding. If you speed test near 20mb then don't worry about it cause ur not drawing a lot.
BAD ASS NOTE 4

2 things
1. Set them up as 2 separate networks with different names as passwords. Thus prevents devices from auto switching
2. As a general principal 5.0 ghz I'd better for streaming media and gaming, but does not go through walls well. 2.5 ghz is what gives your router is range. So anything that is streaming (eg. Xbox, chromecast, pc) you want on 5 ghz and close to your router, anything else you want on 2.5 ghz so it will work at longer range without losing signal.
Sent from my SM-N910T using XDA Free mobile app

802.11n on 2.4GHz can connect at a minimum of 72Mbps and a maximum of 600Mbps. Unless you spent a boatload on a router and live in the middle of nowhere and operate no bluetooth devices you're unlikely to get 600Mbps on 2.4GHz as it relies on having four antennae and a 40MHz block available. 5.0GHz is much less congested so you'll always get the full 40MHz channel and the speed is limited by the number of antennae on your router.
The Note 4 supports 802.11ac, which skews it more heavily in favor of the 5GHz band. 802.11ac can use up to 160MHz channels which can achieve a data rate of 1300Mbps on the 5GHz band.
Now, all of that is completely theoretical. I can tell you that my T-Mobile Cellspot allowed me to hit ~80Mbps on 2.4 and ~130Mbps on 5 when I had a 130Mbps connection. I switched to Verizon and took 50Mbps due to cost, and the router they provide will only hit 50Mbps on the 5GHz band. On 2.4GHz I see closer to 25Mbps unfortunately.
Basically, I would set it up at 5GHz and walk to the extreme end of your house. See if you can still speedtest at your full line speed. If you can, stick to 5GHz. If you lose signal, drop to 2.4GHz.

Thanks for the answers guys.