Related
I tried 5 different roms and i feel cyanogenmod 6 rc2 version is stable. but i am worrying if i try one more custom rom then will it break my phone?. Please tell me how many time we can install roms in the phone.
Will it create a bad sector on my phone.
dlcsboop said:
I tried 5 different roms and i feel cyanogenmod 6 rc2 version is stable. but i am worrying if i try one more custom rom then will it break my phone?. Please tell me how many time we can install roms in the phone.
Will it create a bad sector on my phone.
Click to expand...
Click to collapse
Well as long as you're wiping between different ROMs you should be fine. And even if you are there won't be any permanent damage. The only way you can brick your phone is by installing a bad/old radio.
Even if there's a limited number of "flashing" the phone you won't reach it before you get a new phone.
Likely in the millions of times.
Don't worry about it.
Its the same question like "how many times can you write data on a sd card", you already got a new one when you reach that number
Flash memory has a certain number of read write times until it fails. But that number is so high that it will be years from now.
how can i know if i have a bad sector??
Amritttt said:
how can i know if i have a bad sector??
Click to expand...
Click to collapse
You have to wipe/install a new rom and copy logs to sd card from either other or advanced menu, havent used amon_ra recovery in forever
So, how do we get to the answer of how many times one can flash their phone?
That is such an interesting question. The answer must be had!
androidcues said:
So, how do we get to the answer of how many times one can flash their phone?
That is such an interesting question. The answer must be had!
Click to expand...
Click to collapse
Lol, I may be able to tell you soon, flashing nightlies every day
How many stars are there in the Galaxy?
Flippy125 said:
Lol, I may be able to tell you soon, flashing nightlies every day
Click to expand...
Click to collapse
EVERY DAY ISN'T ENOUGH!!!!!!!1111oneeleven
Flippy125 said:
Lol, I may be able to tell you soon, flashing nightlies every day
Click to expand...
Click to collapse
Hey, I am a total newbie but I would like to flash the nightlies as well. I usually backup all my apps and settings using Titanium Backup, do a Nandroid backup, wipe and then flash the new ROM. However, backing up all apps and settings using Titanium Backup and restoring them after flashing the nightly is quite time consuming. Even worse is arranging the application short cuts / widgets on the desktops after a fresh install.
Nandroid will allow me to go back to backed up version after I have played around with the nightly for a few hours. But then I lose all the features of the nightly once I am back to my old ROM. As I am carrying only a single phone, it becomes mandatory for me to restored the Contacts, Messages, Applications and Settings after flashing a new ROM.
It may sound stupid but is there a better and faster way of doing things without having to restore all applications/settings from the backup so that I also could try out the nightlies? How do you manage this?
For the most part, you can flash nightlies without a wipe, if you're going from CM to CM. If you see weird behavior after flashing, then go back and wipe, and if that doesn't work do a complete wipe and flash.
If you're on another ROM, then I would definately wipe...
Sent from my Nexus One using XDA App
Exactly 6.3 times. That is all. But nobody mentions it.
danger-rat said:
For the most part, you can flash nightlies without a wipe, if you're going from CM to CM. If you see weird behavior after flashing, then go back and wipe, and if that doesn't work do a complete wipe and flash.
If you're on another ROM, then I would definately wipe...
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
Thanks, danger-rat! I'll give it a shot
meechto said:
Thanks, danger-rat! I'll give it a shot
Click to expand...
Click to collapse
I strongly suggest wiping cache and dalvik-cache prior to flashing a new nightly, it prevents **** and doesn't affect your settings/files
Haven't been on CM for awhile, but if you use Launcher Pro or ADW they have Homescreen backups. Have had good luck with MyBackUpPro too.
Ken
3 times. 1...2...crunch...3. Haven't you all seen the tootsie pop commercial?
androidcues said:
So, how do we get to the answer of how many times one can flash their phone?
That is such an interesting question. The answer must be had!
Click to expand...
Click to collapse
How many licks does it take to get to the Tootsie Roll center of a Tootsie Pop? LMAO, that's what I WANNA KNOW!
I heard something recently about fileshare sites being shut down...is that what I'm experiencing. Tried to download files from: http://forum.xda-developers.com/showthread.php?t=1359068 and none of the links work. Actually a couple did but said I could only download a file I uploaded myself. I tried downloading from another thread on this site and had the same problem. Any solutions/alternatives? How can I download from the link I posted above?
Thanks!
Firecracker_RC said:
I heard something recently about fileshare sites being shut down...is that what I'm experiencing. Tried to download files from: http://forum.xda-developers.com/showthread.php?t=1359068 and none of the links work. Actually a couple did but said I could only download a file I uploaded myself. I tried downloading from another thread on this site and had the same problem. Any solutions/alternatives? How can I download from the link I posted above?
Thanks!
Click to expand...
Click to collapse
I see a KJ4 link. Have you tried the KJ5 thread? It's the newest one for our 7310.
Hi nirogu325, thanks for replying. This is what I am trying to do:
-Enable adhoc connection so I can use my windows mobile phone as a hotspot for my tabl, and
-Enable USB charging for my tab in my car and elsewhere, not just wall jack.
Based on what I've read, I need busybox (Titanium back up says it's installed but when I downloaded an app called wifiadhocenabler, it says it is not installed. Installing it from the market says I need Nand Unlock and this is where I'm stuck at the moment. Do you know how to perform this on the P7310? Or an easier way to meet the objectives above?
Thanks again
Firecracker_RC said:
Hi nirogu325, thanks for replying. This is what I am trying to do:
-Enable adhoc connection so I can use my windows mobile phone as a hotspot for my tabl, and
-Enable USB charging for my tab in my car and elsewhere, not just wall jack.
Based on what I've read, I need busybox (Titanium back up says it's installed but when I downloaded an app called wifiadhocenabler, it says it is not installed. Installing it from the market says I need Nand Unlock and this is where I'm stuck at the moment. Do you know how to perform this on the P7310? Or an easier way to meet the objectives above?
Thanks again
Click to expand...
Click to collapse
I assume you're on a stock firmware. If I were you, I'd flash this specific version which is already rooted and has busybox as you can read in the OP. Also, flash the v2d version of the motley kernel and go here for the USB charging script and instructions on enabling. I know that last link is for the 10.1, but it is the one motley linked to in the v2b version changelog in his kernel thread.
After my soft brick yesterday, I used Odin to "install" the version you attached in your General Guide post P310XARKJ5_P7310UEKJ5_HOME.tar.md5). That's the one, right?
Anyway, the good news is, I decided to install BusyBox without doing the Nand Unlock (maybe it was already done?), and it worked! The wifiadhocenabler app works now and I have a connection to my wm phone! Yay! Before trying the app (for the sake of onlookers) I tried the other method with the wpa_supplicant, such as the one here: http://androidtablethacks.com/android-tablet-hacks/how-to-enable-adhoc-wifi-on-android-tablets/ and it did not work for me. The app did!
So now, I'll try the kernel you posted above and then the USB charging.
I'm going to look over your general guide to see if I can figure out how to flash. I'm guessing it's the same or similar to when I recovered my tab in Odin...?
Firecracker_RC said:
After my soft brick yesterday, I used Odin to "install" the version you attached in your General Guide post P310XARKJ5_P7310UEKJ5_HOME.tar.md5). That's the one, right?
Anyway, the good news is, I decided to install BusyBox without doing the Nand Unlock (maybe it was already done?), and it worked! The wifiadhocenabler app works now and I have a connection to my wm phone! Yay! Before trying the app (for the sake of onlookers) I tried the other method with the wpa_supplicant, such as the one here: http://androidtablethacks.com/android-tablet-hacks/how-to-enable-adhoc-wifi-on-android-tablets/ and it did not work for me. The app did!
So now, I'll try the kernel you posted above and then the USB charging.
I'm going to look over your general guide to see if I can figure out how to flash. I'm guessing it's the same or similar to when I recovered my tab in Odin...?
Click to expand...
Click to collapse
If you mean flashing a CWM package as the motley kernel, a file goes in the SDcard, you access the CWM Recovery and flash. That's a generic way BUT depending on what you will flash you may have to wipe. That's why I avoided altogether putting generic instructions regarding CWM packages in my guide (instructions may vary between ROM and kernels). Read your flashable package's thread carefully.
kind of like rooting? Yes, do I have to wipe to flash the motley kernel? I'm not seeing the flashable packages thread, can you point me to it?
Firecracker_RC said:
kind of like rooting? Yes, do I have to wipe to flash the motley kernel? I'm not seeing the flashable packages thread, can you point me to it?
Click to expand...
Click to collapse
No, lol. If you want to flash the motley kernel just follow that thread's instructions. I gave you the motley kernel thread link in a previous post. For kernels, no wipe is necessary, for ROMs, yes.
Ok, thank you. lol
Firecracker_RC said:
Ok, thank you. lol
Click to expand...
Click to collapse
You're welcome. Some people have the tendency NOT to wipe while flashing ROMs...yet complain later on the road. Always wipe when it comes to ROMs if you want to avoid issues. The only bugs you will experience are the ones that come with the ROM already. Better safe than sorry.
Ah, that leads me to wonder...When my tab was soft bricked and I used Odin3 and inserted the KJ5 file into the PDA section, and so on (I think that was flashing), was I supposed to do a wipe before I did that? If so, would it be better if I started from scratch again? ...hoping not, but better now than latter I'm thinking.
Firecracker_RC said:
Ah, that leads me to wonder...When my tab was soft bricked and I used Odin3 and inserted the KJ5 file into the PDA section, and so on (I think that was flashing), was I supposed to do a wipe before I did that? If so, would it be better if I started from scratch again? ...hoping not, but better now than latter I'm thinking.
Click to expand...
Click to collapse
No. ODIN clears everything (including kernels, ROMs and CWM Recoveries). Everything back to stock. I was just referring to flashing other custom ROMs (non-ODIN, i.e. CWM flashable) procedures. Stick to the thread instructions in your chosen ROM and you'll be fine. It's just that some don't follow instructions and due to that, they may experience weird bugs.
That's good news, and strange, because after I used Oden3 (in the way I previously described), all my apps and files were still in tact. Does it just affect the system and not the file memory?
P.S. Hey! I'm no longer a noob! lol I just noticed I am now a "Junior Member".
P.S.S. I'm now running my tablet off my wm hotspot while charging it on my pc! woohoo
Firecracker_RC said:
That's good news, and strange, because after I used Oden3 (in the way I previously described), all my apps and files were still in tact. Does it just affect the system and not the file memory?
P.S. Hey! I'm no longer a noob! lol I just noticed I am now a "Junior Member".
Click to expand...
Click to collapse
That is because you didn't check F.Reset Time on the left side of ODIN before flashing. It is advisable to make sure it is checked. Thanks, I'm gonna put that little but important detail in my guide (dunno how I missed that one ). I advise using Titanium Backup (for apps backup) and then ODIN. You might be fine as you are, but if you ever experience something weird then you know.
Firecracker_RC said:
P.S.S. I'm now running my tablet off my wm hotspot while charging it on my pc! woohoo
Click to expand...
Click to collapse
I'm glad you made it!
Thanks for your support. If I ever have some extra change and feel like making a donation, I'll keep you in mind! Hey, where's your donation link anyway? Better get one!
nirogu325 said:
That is because you didn't check F.Reset Time on the left side of ODIN before flashing. It is advisable to make sure it is checked. Thanks, I'm gonna put that little but important detail in my guide (dunno how I missed that one ). I advise using Titanium Backup (for apps backup) and then ODIN. You might be fine as you are, but if you ever experience something weird then you know.
Click to expand...
Click to collapse
My tablet is definitely a little laggy now, but that could be the 3.2 HC. Since I did not check that off, does it mean that it did not install on a clean wipe? I'm wondering if I should just do it while I remember the path to how I got where I'm at now. I doubt I'll remember everything down the road.
I have been making nandroid backups as well as titanium app backups.
Firecracker_RC said:
My tablet is definitely a little laggy now, but that could be the 3.2 HC. Since I did not check that off, does it mean that it did not install on a clean wipe? I'm wondering if I should just do it while I remember the path to how I got where I'm at now. I doubt I'll remember everything down the road.
I have been making nandroid backups as well as titanium app backups.
Click to expand...
Click to collapse
As for donations, nah it's ok, I am no developer. As for the suggestion, it was just that, a suggestion for next time. Keep that in mind. It will become a habit down the road.
Sent from my GT-P7310
nirogu325,
I'm back to do my clean wipe. I performed the wipe/data reset in nandroid and now it's saying there is an update from KJ5 to LA3. Do you still think the custom kj5 is better than the stock LA3? I'm wondering if I should just install the update, root, install the motley kernel and go from there...?
Hope you're well! I still think you should add a donate link...you don't have to be a developer, your assistance/guidance is equally helpful to the community.
While I'm waiting, I flashed http://forum.xda-developers.com/showthread.php?t=1375112 and then I noticed I have the old CMR so I downloaded your updated package: GTab89Files and I cannot paste a single file from that folder onto my tab. I can paste files from other folders, but this one I copy and when I go to paste the paste option is not enabled; if I drag I get a little red circle with a line through it. Any ideas as to why it's rejecting?
Hello All;
I have decided to try and male my HP touch pad an Android only touch pad.
I need help though as i am a novice at best.
I am looking for help on the files i will need. Want to install CM 10 recent and CWM.
Do i need a boot loader or will that be in the ROM?
And what other files will i need?
i am assuming i need a ROM, Recovery, and GAPPS. Other than that i am not sure.
Found someone on the WebOS Nation who is willing to help so i dont want to go into this like and idiot, i want to have my ducks in a row.
Any help will be appreciated
thanks
This is a good guide: http://forum.xda-developers.com/showthread.php?t=2147284. As for Android-only, I don't recommend it. WebOS has gotten me out of Android trouble before.
Install Android only
bananagranola said:
This is a good guide: http://forum.xda-developers.com/showthread.php?t=2147284. As for Android-only, I don't recommend it. WebOS has gotten me out of Android trouble before.
Click to expand...
Click to collapse
Good point, Hey let me ask you something.
I like flashing ROMs but I always end up with a mess. Moboot, i dont think updates as grub2 does. So, i have thought the best way to switch ROMs would be treating the ROM as a first install, does that make sense and do you agree?
Or do you know a method to change ROMs that works well for you?
geomonroe said:
Good point, Hey let me ask you something.
I like flashing ROMs but I always end up with a mess. Moboot, i dont think updates as grub2 does. So, i have thought the best way to switch ROMs would be treating the ROM as a first install, does that make sense and do you agree?
Or do you know a method to change ROMs that works well for you?
Click to expand...
Click to collapse
Android doesn't update the way Linux does, it only updates apps; the bootloader isn't going to update neatly from a package manager. At the same time, updating the TP's bootloader (moboot) is usually unnecessary. On the other hand I usually like to keep my recovery (TWRP/CWM) up to date. When I switch ROMs I just wipe and flash from recovery. Never had a problem.
Install Android only
bananagranola said:
Android doesn't update the way Linux does, it only updates apps; the bootloader isn't going to update neatly from a package manager. At the same time, updating the TP's bootloader (moboot) is usually unnecessary. On the other hand I usually like to keep my recovery (TWRP/CWM) up to date. When I switch ROMs I just wipe and flash from recovery. Never had a problem.
Click to expand...
Click to collapse
I wander what i am doing wrong? i had skizoid and wanted to go back to cyanogenmod. followed the rules for flashing a rom and at the bootloader i had an entry still on the list for skiziod and the cyanogen entry, when i clicked the cyan entry i got the eternal loading screen.
geomonroe said:
I wander what i am doing wrong? i had skizoid and wanted to go back to cyanogenmod. followed the rules for flashing a rom and at the bootloader i had an entry still on the list for skiziod and the cyanogen entry, when i clicked the cyan entry i got the eternal loading screen.
Click to expand...
Click to collapse
What rules are you following? Full wipe? Leaving extra stuff in moboot is normal. You can delete the extras if they really bother you.
wipe cache and dalvik and factory reset
geomonroe said:
wipe cache and dalvik and factory reset
Click to expand...
Click to collapse
You should wipe system as well and if the extra uimage is still there you can delete it using a file manager after booting
4catalyst2cI said:
You should wipe system as well and if the extra uimage is still there you can delete it using a file manager after booting
Click to expand...
Click to collapse
As far as I know, most ROM install scripts automatically wipe system for you. Can't hurt to try, though.
Thankfully I have this zip again thanks to sstar posting it the other day. This zip will wipe your ulmage clean. Just flash it as you would a rom, than flash rom and gapps after.
https://copy.com/3F9kE
When should you do a full wipe when installing a custom rom and when is it ok to dirty flash? Can someone please explain?
Sent from my HTC One using xda app-developers app
If you're changing bases it's always good to wipe. And if you're changing roms you should always wipe. But if you're just applying an update you might get away with a dirty flash. Save a backup first and you don't risk much with a dirty flash.
Sent from my HTC One using xda app-developers app
lampel said:
If you're changing bases it's always good to wipe. And if you're changing roms you should always wipe. But if you're just applying an update you might get away with a dirty flash. Save a backup first and you don't risk much with a dirty flash.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
I apologize if this is a stupid question. When you say change base what exactly do you mean? Is this from one rom to another or a version change on the same rom like 5.0 to 6.0? Or is it a kernal change? If it is a version change would 5.1 to 5.6 be considered changing base?
Thank you very much. Again, I apologize if this is a dumb question. I have read around a little and did not quite get an answer I was comfortable with.
easyrabbit said:
I apologize if this is a stupid question. When you say change base what exactly do you mean? Is this from one rom to another or a version change on the same rom like 5.0 to 6.0? Or is it a kernal change? If it is a version change would 5.1 to 5.6 be considered changing base?
Thank you very much. Again, I apologize if this is a dumb question. I have read around a little and did not quite get an answer I was comfortable with.
Click to expand...
Click to collapse
What rom are you using?
CYNiCAL2KX said:
What rom are you using?
Click to expand...
Click to collapse
I am using VenomOne 5.7.0 but it is more of a general question. I am a bit new to this and want to have a good understanding of everything from the ground up.
---------- Post added at 08:31 AM ---------- Previous post was at 08:23 AM ----------
easyrabbit said:
I am using VenomOne 5.7.0 but it is more of a general question. I am a bit new to this and want to have a good understanding of everything from the ground up.
Click to expand...
Click to collapse
Sorry I meant ViperOne...
easyrabbit said:
I am using VenomOne 5.7.0 but it is more of a general question. I am a bit new to this and want to have a good understanding of everything from the ground up.
---------- Post added at 08:31 AM ---------- Previous post was at 08:23 AM ----------
Sorry I meant ViperOne...
Click to expand...
Click to collapse
'4.19.401.8' that is the current base which is in use by viper. Sometimes it's okay to flash, it's trail and error.
Always make a Nand before you flash, incase anything goes wrong, you can go back to the previous version, like a windows restore point.
A fresh install is wiping data and cache in TWRP it's called a factory reset. This doesn't format the /sdcard/0 so all sd card data remains.
If you were to flash a older base with a newer one, it may work perfectly, it may not, what I do is: Create a Nandroid of system,data,boot. Wipe, then install, then I restore data only. This way the phone tends to be (fairly) just how you left it, with messages, apps etc still remaining.
Like I said, after making a Nand, just flash unless the OP says specifically not to. Then if you have issues, it's a simple case of rolling back by restoring Data, System. I hope this answers your question, I think you'll just get the hang of how it works just by actually giving it ago, not much can really go wrong unless you start flashing things not meant for your phone.
CYNiCAL2KX said:
'4.19.401.8' that is the current base which is in use by viper. Sometimes it's okay to flash, it's trail and error.
Always make a Nand before you flash, incase anything goes wrong, you can go back to the previous version, like a windows restore point.
A fresh install is wiping data and cache in TWRP it's called a factory reset. This doesn't format the /sdcard/0 so all sd card data remains.
If you were to flash a older base with a newer one, it may work perfectly, it may not, what I do is: Create a Nandroid of system,data,boot. Wipe, then install, then I restore data only. This way the phone tends to be (fairly) just how you left it, with messages, apps etc still remaining.
Like I said, after making a Nand, just flash unless the OP says specifically not to. Then if you have issues, it's a simple case of rolling back by restoring Data, System. I hope this answers your question, I think you'll just get the hang of how it works just by actually giving it ago, not much can really go wrong unless you start flashing things not meant for your phone.
Click to expand...
Click to collapse
Thank you very much for the info. So now I understand what the base is. Aside from time or laziness I would think that doing a full wipe is the way to go. Maybe I am wrong but I would rather not take chances.
Right now Iam currently having some issues. I basically did a dirty flash of the same version I am on to clear the theme and it went wrong. It never came back up after an hour in the "starting applications" state. After that I got back in to recovery (TWRP) and did full wipes and installs. They seem to go OK but then the android setup crashes right after the "name your device" part and the launcher wont start (chose Nova). Everything just hangs. I reboot but then it just hangs. I just did my nandroid restore and I am back up and running but not sure what is going wrong. I tried the install a few times with different options but everytime the setup part crashes. So my simple question is now another full blown issue haha.
I love this board tho, everyone is so helpful. One day I hope to be the one giving the advice.
CYNiCAL2KX said:
'4.19.401.8' that is the current base which is in use by viper. Sometimes it's okay to flash, it's trail and error.
Always make a Nand before you flash, incase anything goes wrong, you can go back to the previous version, like a windows restore point.
A fresh install is wiping data and cache in TWRP it's called a factory reset. This doesn't format the /sdcard/0 so all sd card data remains.
If you were to flash a older base with a newer one, it may work perfectly, it may not, what I do is: Create a Nandroid of system,data,boot. Wipe, then install, then I restore data only. This way the phone tends to be (fairly) just how you left it, with messages, apps etc still remaining.
Like I said, after making a Nand, just flash unless the OP says specifically not to. Then if you have issues, it's a simple case of rolling back by restoring Data, System. I hope this answers your question, I think you'll just get the hang of how it works just by actually giving it ago, not much can really go wrong unless you start flashing things not meant for your phone.
Click to expand...
Click to collapse
May I ask, is restoring the data folder similar to adb backup/restore or even titanium? With titanium I could just restore messages or whatever. Doing the whole data folder could put back something I dont want or something I want to get rid of. With my current situation I think this might solve my issue with setup but I really wanted to start from scratch and retweak everything.
Regarding the base, I cant seem to find where I can check that on the device. It is not in settings-about where I would expect to find it.
I am finally working my nerve up to try this again and figure out why the initial android setup is crashing. I am getting more comfortable now especially since I know my nandroid restore works. Good fun but scares the hell out of me at the same time when things go wrong haha....
easyrabbit said:
May I ask, is restoring the data folder similar to adb backup/restore or even titanium? With titanium I could just restore messages or whatever. Doing the whole data folder could put back something I dont want or something I want to get rid of. With my current situation I think this might solve my issue with setup but I really wanted to start from scratch and retweak everything.
Regarding the base, I cant seem to find where I can check that on the device. It is not in settings-about where I would expect to find it.
I am finally working my nerve up to try this again and figure out why the initial android setup is crashing. I am getting more comfortable now especially since I know my nandroid restore works. Good fun but scares the hell out of me at the same time when things go wrong haha....
Click to expand...
Click to collapse
Ususally most issues regarding cross flashed bases are problems derived from the system partition, however i'm not saying it doesn't happen, but I've never really had many issues restoring data. Also, once you back up data , you can install a Nandroid manager app where you can restore certain things from nand backups. This is what I chose to use over things like titanium as it's just another thing to do
CYNiCAL2KX said:
Ususally most issues regarding cross flashed bases are problems derived from the system partition, however i'm not saying it doesn't happen, but I've never really had many issues restoring data. Also, once you back up data , you can install a Nandroid manager app where you can restore certain things from nand backups. This is what I chose to use over things like titanium as it's just another thing to do
Click to expand...
Click to collapse
Thank you very much. I have heard back and forth on wiping the system but had never done it till now. I am still not sure what was happening. in my initial installs I allways removed sense and used Nova. The last time I left Sense and most off the apps. I also 're-downloaded the zip. it worked like a charm. soon I will start investigating kernals and updating firmwae and antennas. Will play with the basics for a while first tho. eventually I would like to try my own. However the bar is set high with venomone.
I am now dealing with sense which is ok bit for me Nova is as close to perfect a launcher for me. still investigating battery lifevetc but will probably do another flash removing sense. venomone fixed everything I didnt like about it for the most part but I love to be able to swipe up or down anywhere to get quickbar and app drawer... still testing tho, I have a full life but definitely want to contribute here... my new obsession.
I can access the CM12 Recovery but thats it. I have tried with many nightlies sideloading through adb or just from the sd card but it still isnt working. I don't mind downgrading but I can't work out how to.
H0lmEd said:
I can access the CM12 Recovery but thats it. I have tried with many nightlies sideloading through adb or just from the sd card but it still isnt working. I don't mind downgrading but I can't work out how to.
Click to expand...
Click to collapse
Hello
You have to flash the stock rom with flashtool to recover the phone.
I give you a link of the stock rom for the xperia z3 compact.
And if you need instructions tell me here.
I hope that I help you.:good:
Regards
ovejasrepublicanas said:
Hello
You have to flash the stock rom with flashtool to recover the phone.
I give you a link of the stock rom for the xperia z3 compact.
And if you need instructions tell me here.
I hope that I help you.:good:
Regards
Click to expand...
Click to collapse
No offence but that's crappy advice, imo. If you tell people that the only way to recover from a soft brick is by restoring stock, you'll help raise a full generation of idiots. Flashing a stock .FTF can do many things if you don't know how to use Flashtool, including wiping the internal storage (which I'm sure OP doesn't want), and is only really necessary if nothing else works.
@H0lmEd: Try flashing the TWRP recovery (2.8.5.0 is the latest available version) and while you're at it, flash the boot image of the nightly you've downloaded. Boot into TWRP, then backup your data partition (if you have any data on there that you'd like to restore later). Then wipe /system, /cache, /data and dalvik (basically anything but your SD card and internal storage), and flash the ROM zip. You should be up and running again.
If you want to restore any apps and such, you can try just restoring from TWRP, or (preferably) using an app (like Titanium Backup) to restore your apps and their data from the recovery backup.
someone755 said:
No offence but that's crappy advice, imo. If you tell people that the only way to recover from a soft brick is by restoring stock, you'll help raise a full generation of idiots. Flashing a stock .FTF can do many things if you don't know how to use Flashtool, including wiping the internal storage (which I'm sure OP doesn't want), and is only really necessary if nothing else works.
@H0lmEd: Try flashing the TWRP recovery (2.8.5.0 is the latest available version) and while you're at it, flash the boot image of the nightly you've downloaded. Boot into TWRP, then backup your data partition (if you have any data on there that you'd like to restore later). Then wipe /system, /cache, /data and dalvik (basically anything but your SD card and internal storage), and flash the ROM zip. You should be up and running again.
If you want to restore any apps and such, you can try just restoring from TWRP, or (preferably) using an app (like Titanium Backup) to restore your apps and their data from the recovery backup.
Click to expand...
Click to collapse
You offended me.I go with the good intetion to help other people.
I want to remove my account.There are more experts than me.Now i know that my help don´t served.
Regards
ovejasrepublicanas said:
You offended me.
Click to expand...
Click to collapse
While that was not my intention, and I do feel apologetic, that doesn't change anything. I don't know why you felt the need to write this.
I go with the good intetion to help other people.
I want to remove my account.There are more experts than me.Now i know that my help don´t served.
Click to expand...
Click to collapse
I believe that your intentions were good, as were mine; I was simply pointing out that your advice is valid and satisfactory, but that there are many methods that are more efficient and overall superior.
You are free to remove your account should you so please, but having somebody correct you is no reason to wish to do that -- must I switch schools (or worse, commit suicide) because my math teacher corrected me when I had made an error!? We're here to help other people learn, both you and me. There are hundreds upon hundreds of people that know better than both of us, and we are here to learn from them. Taking the comment of your advice to your heart is no way to go about it (or anything else in life, for that matter). Instead what you should see is a short critique of your advice, followed by a comment on what is better and why that is so -- see the knowledge and helpfulness, don't stop because you did something that wasn't perfect.
And though my comment was not meant as a derogatory one, I do see that my poor choice of words could and, in fact, should, be improved upon.