Database Develop

[Q] Download Mode & Booting Problem

Helo All,
I am running CM 7.1 and facing the following two issues:
1) My SGS i9000 boots itself even if i select the Power Off option.
2) Whenever i take out the battery and reinsert it into the set...the phone automatically boots into Download Mode. Its only after 3-5 attempts that the phone boots normally. This happens only when i take out the battery, otherwise it boots normally.
Please help.
Kashif

Try with this:
- Install Darky 10.2 RE "multiupload.com/XWD2GIFMMM" (WITH ODIN)
- Reboot to recovery
- Wipe data/factory reset
- Flash CM7.1
- Your phone will reboot and go into bootloop. That's normal. Press Power + Home + Vol Up for 10 seconds and you'll be into recovery
- Wipe data / factory reset
- Format /system
- Flash CM7.1 ROM again
- Reboot

[Q]Brick??

I am not so sure about my phone status,
here is the condition:
can enter download mode, and ramdump mode but can't enter recovery mode and keep restarting at samsung logo (not at boot image)
i recently installed ICS cm9
and CWM 5.0.2.8
this happen when i tried to reboot and enter recovery(pressing power button and select recovery)
i tried to flash using odin, but it always stop at reboot phase (as i mentioned before always stop at samsung logo but can't proceed further)
any advice on what i suppose to do to fix it?

so no one have solution for me?

Did u wipe data and cache when flashing cm9
Sent from my GT-S5570 using Tapatalk 2

Can u go in download mode
Sent from my GT-S5570 using xda premium

ruewar said:
I am not so sure about my phone status,
here is the condition:
can enter download mode, and ramdump mode but can't enter recovery mode and keep restarting at samsung logo (not at boot image)
i recently installed ICS cm9
and CWM 5.0.2.8
this happen when i tried to reboot and enter recovery(pressing power button and select recovery)
i tried to flash using odin, but it always stop at reboot phase (as i mentioned before always stop at samsung logo but can't proceed further)
any advice on what i suppose to do to fix it?
Click to expand...
Click to collapse
flash gingerbread via odin.
then install cwm recovery 4
then install cwm 5
wipe data and cache before and after flashin a new rom of ur choice...

Lol. I faced this problem long time back. Do this-
Flash stock Rom with help of Odin.
After it tells pass, you ll boot loop. Its normal.
Remove usb.
Remove battery and put it back while its boot looping.
Go to "Stock Recovery" and then clear user data and cache.
Reboot and wait. Might take around 1min-5min max. Good luck.

[Q] Flash Custom ROM with Odin?

Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...

If you can get into download mode (power off, hold V+/V-, insert USB), you can try flashing a ROM via Heimdall. Apex 12.5 has a package you can flash from Heimdall.
You can also try Mosaic 9, as that has an Odin-based installer package.

surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
yes you can, use the link below and download any of the latest rom with bootloader based on odin.
http://forum.xda-developers.com/showthread.php?t=1300843

Galaxy Grand Bricked
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP

KrisjNoel said:
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP
Click to expand...
Click to collapse
Read above, the answer was given.
http://forum.xda-developers.com/showthread.php?t=1300843

same problem but on a different device its gt-i9070 by samsung I download ROMs already but cant flash them there is absolute no custom recovery for this model tried anything and everything on google and xda , any solution to apply ROM not using recovery

Is this file can use to flash i9300??? Where can i get custom rom for gt-i9300 that flash via odin...bcoz my s3 also cannot boot to recovery mode to hard reset

Hey,
I'm using samsung galaxy star s5282. I rooted this phone 2 days ago. Everything went good until today when i was i my class it suddenly switched off. When i rebooted it, it hang on the samsung logo.
I tried to boot into cwm recovery mode by pressing v+, home, power but it boots into default system recovery mode.
I again flashed cwm recovery many times using odin but it dosent work. Odin shows pass but when i reboot my phone in cwm recovery mode my phone enters in default system recovery mode.
What should i do please please please help.....

Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
applies to all recoveries
cheers
bhavnoor singh

surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
Surenda 1863,
I had exactly the same problem and it took me almost one week of fiiddling and searching the Web to solve it.
The solution was in front me since day ONE : install ODIN on the PC !
In my case, I had I had accidentally wiped out the stock ROM and the tablet was hopelessly frozen on the download mode. I couldn't turn it off to boot it back with any of the usual buttons ( Volume , Home, Power)
I made the wrong assumption that since my PC didn't see the tablet, it couldn't connect to Odin either . I was wrong!
Here is what you have to do:
1. Install Odin on your PC. Connect the tablet to it. You will see that Odin sees the tablet because there will be a caption saying "added" on the top left.
2. Press the AP tab button at the right to go to the location where your Stock ROM is. The stock ROM file will have an MD5 ending.
3 Once the file is loaded (next to the AP button) just press Start. You will see the DOWNLOAD bar gradually filling up on the tablet and at the top left of ODIN.
4. When the operation is terminated, you will see a caption " PASSED" at the top left of he Odin screen and the tablet will automatically boot up to the HOME screen.
As simple as this! I didn't even have to worry about flashing the TWRP ( or CWR) recovery system, probably because the OS ROM was already wiped out. May be your case is different. I only know that in my case it worked like a charm.
Ittiandro

[Q] Flash CWM recovery on GT-19305?

Can it be done? How to do it?

through Odin. make sure it's for the i9305

The most recent CWM ported is in this thread, which also contains a link to Odin. Make sure Kies isn't running and that you have the right USB drivers, open Odin, put your phone in download mode (turn it off, then hold volume down + home while you turn it on again), connect your phone to your PC, and flash the .tar.md5 file as PDA.

1. First, download Odin from this link
Make sure you have the drivers for your phone installed. *If not download KIES from the Samsung site and install*
2. Plug your phone into the computer and start Odin.
3. Shutdown your phone and boot it in to download-mode by pressing Vol. down + home + power
4. Press the PDA-button in Odin and select your CWM-recovery file.
5. Make sure that Auto Reboot and F. Reset Time checkboxes are selected.
6. When flashing is done you will se a message "PASS" and your device should restart automatically.
Congratiulations, you now have CWM flashed on your phone
Here's a link to a CWM recovery flashable file if you not have one alreddy. LINK
Creds for the CWM-recovery file upload goes to codeworkx

I have flashed the cwm file through odin. It passed but when I go into recovery it is still the stock recovery and not cwm. Why?

I've gotten the same problem. So.. i flashed the recovery, but whej the phone restarted i shut it down without booting.(i removed the battery when the s3 lte screen showed up). Then i entered recovery and it worked. (S3 lte reflashes stock recovery and other stock things on stock kernel when booting). If you want permanent cwm recovery, flash a custom kernel! I hope this will help you!
Sent from my GT-I9305 using XDA Premium HD app

I used this one http://forum.xda-developers.com/showthread.php?t=2140681
Seems to work fine for me
Sean.

Struck at recovery black screen

Hi Guys,
I'm using Paranoid 4.6 beta5 i tried using power + vol up + home button to enter into the recovery mode but it just displayed a black screen. Now the crazy thing I did was I downloaded reboot to recovery app and used it and ever since then i am struck at the black screen i see samsung logo and then just black screen no paranoid boot animation what do i do now ?
Solution:
If someone falls in the same boat here's how i resolved it i connected the usb to my pc and did i restart which made it reboot in safe mode then i unplugged it and did a reboot from the power button and voila everything is back to normal

You need to flash a kernel or stock ROM in PC Odin and get recovery back
Sent from my GT-I9205 using Tapatalk

Try this:
I didn't experience any data loss but cant guarantee anything.
1. Download this http://d-h.st/HJM
2. Flash with PC Odin (Add via PDA button and make sure ONLY Auto reboot is checked)
3. Wait till completed
4. Boot into recovery (Which will now be CWM)
5. Do a factory reset and wipe cache and dalvik cache
6. Reboot
7. Enjoy
8. Smash my thanks button (Please.....)
Note: You will now be on Gingerbread 2.3.5 Rooted + CWM, and you're good to go.