Database Develop

Cry for help! D:

I tried to root my G1 from this link..
http://forum.xda-developers.com/showthread.php?t=442480
Made it through the first few steps well, until i finally began to upgrade the image dreaimg or w,e.. It failed on me & now i cannot leave the screen. I remove the battery & turn it on. but when i do it stays in the same spot.. I tried everything & need some help.. ]:
Here is a pic of the screen.. : http://img683.imageshack.us/img683/4355/picture001bk.jpg

Did it start updating, then stop in the middle of it? Did the phone turn off due to running out of battery during the flash? Did you format your card to FAT32, download the proper RC for the original sale location of your phone?
Try pulling the battery at, then removing your SD card, do a long format to FAT32 (whether it is or not) copy the dreamimg.nbh onto the SD card, put the SD card back in the phone, put the battery back in, put it on a charger not turned on for 30 minutes, then take it off the charger...
Now that you have done all that, try booting into boot loader again by holding down the camera and power button until it goes into that screen again and does it's thing.
If this doesn't work, well, good luck since I have no idea from there.

Yes i've tried all of that.. Once i remove my battery it turns on, but as soon as i put it on again it turns on & the same screen appears.. There nothing i can do to go back to the Home screen.. D':
I most likely made a mistake but now i cannot fix this! ]:

SOme onee! please help me.. ]:
Everyone continues to ignore my thread..

have you tried to reset within there by pressing Home+menu+end? ppl are not ignoring.. jus they dont kno how to help.. as the guy already gave ideas that im pretty sure everyone would have said

Jose_95 said:
SOme onee! please help me.. ]:
Everyone continues to ignore my thread..
Click to expand...
Click to collapse
When does this screen appear? Instead of the G1 screen or after it? If after, hold down home+Power and get into recovery, try reflashing your rom.

ilostchild said:
have you tried to reset within there by pressing Home+menu+end? ppl are not ignoring.. jus they dont kno how to help.. as the guy already gave ideas that im pretty sure everyone would have said
Click to expand...
Click to collapse
I tried that combination just now & it wont work either.. ]: I've tried all combinations with buttons i know to try and reset the phone to get away from that uploader thing.. But nothing works..

BTaylor927 said:
When does this screen appear? Instead of the G1 screen or after it? If after, hold down home+Power and get into recovery, try reflashing your rom.
Click to expand...
Click to collapse
That screen is the only thing that ever appears on my phone.. ]:I cant take that screen away like i want too.. So it appears instead of the G1 screen..

If that is the only screen that ever shows up, you very well may be bricked, I hate to say it.
It really sounds like during your flashing of the .nbh file it was disrupted for one reason or another, either the battery died or it was a corrupted file, so the only file left on the phone is the boot loader. Thus, it is the only thing that will show...
Of course, I am not 100% positive without knowing exactly what you did, not being able to mess with the phone myself, and so forth.
Some people have been able to bring phones back from the dead by getting lucky and being able to get ADB to work... try plugging the phone into your computer using a data cable and see if you can get any sort of ADB to work, perhaps seeing if you can get the stock HTC update program to recognize the phone and hopefully flash it into working.

pjcforpres said:
If that is the only screen that ever shows up, you very well may be bricked, I hate to say it.
It really sounds like during your flashing of the .nbh file it was disrupted for one reason or another, either the battery died or it was a corrupted file, so the only file left on the phone is the boot loader. Thus, it is the only thing that will show...
Of course, I am not 100% positive without knowing exactly what you did, not being able to mess with the phone myself, and so forth.
Some people have been able to bring phones back from the dead by getting lucky and being able to get ADB to work... try plugging the phone into your computer using a data cable and see if you can get any sort of ADB to work, perhaps seeing if you can get the stock HTC update program to recognize the phone and hopefully flash it into working.
Click to expand...
Click to collapse
So then is there anyway to restart the phone? Like a secret way? & when i connect my phone to the computer when its shut off, it appears on the computer but not completely.. it says that one of the files are not recognized. Damn, this is really a pain.. ]:

So, you cannot boot into recovery, correct? And have you tried to connect to your pc and use ADB?

rjgonza said:
So, you cannot boot into recovery, correct? And have you tried to connect to your pc and use ADB?
Click to expand...
Click to collapse
Agreed.
You should read up tutorials on ADB and see if you can use ADB to access your phone. If you can, your phone can still be recovered.
If not - then yeah, brick.

akapoor said:
Agreed.
You should read up tutorials on ADB and see if you can use ADB to access your phone. If you can, your phone can still be recovered.
If not - then yeah, brick.
Click to expand...
Click to collapse
I cannot connect it to my computer at all.. Once turning on the phone the only thing that appears is the loader thing.. Whats ADB? how can it help me?

The Search button is your friend.
http://forum.xda-developers.com/showthread.php?t=502010

Force Reboot Recovery/Download

Is there a file in the android system that, sort of like an autoexec.bat, lists what to do on startup? For example forcing the system into recovery or download on power on?
I flashed the latest Vibrant firmware and did so with the option to repartition, which Im now finding out was not the right way to flash this one.
Long story short, it didnt contain the dbdata directory information and now, I am unable to boot and unable to get to download. I still have ADB access, it just isnt responding to ADB reboot download, it just comes right back up booting into recovery to flash the last stage of odin before it starts up.
Is there a way to force the phone back into download mode or force it to stop rebooting into recovery?

Pull battery out and USB to use the hardware buttons to manually get into download mode?
P.S. wrong forum

Aren't there some apps that can do that? I do it manually but like you said its not working for you, p.s im downloading that firmware
Sent from my SGH-T959 using XDA App

iwillkillyou said:
Aren't there some apps that can do that? I do it manually but like you said its not working for you, p.s im downloading that firmware
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
OP said that he isn't able to boot so I believe he's stuck on the loadup to Android.

zephiK said:
Pull battery out and USB to use the hardware buttons to manually get into download mode?
P.S. wrong forum
Click to expand...
Click to collapse
Manual buttons arent seemingly working, so far ive tried every conceivable combination of vol up down and power, even if all I do is plug the phone in Im back in recovery before the battery turns green.
(ps. I know, but I had a billion percent better chance not getting a mouthbreather response, despite the definite chance of flame posts lol)

Viralblack said:
Manual buttons arent seemingly working, so far ive tried every conceivable combination of vol up down and power, even if all I do is plug the phone in Im back in recovery before the battery turns green.
(ps. I know, but I had a billion percent better chance not getting a mouthbreather response, despite the definite chance of flame posts lol)
Click to expand...
Click to collapse
Try every step here: http://forum.xda-developers.com/showthread.php?t=771247
Have you successfully gotten into Download mode with hardware buttons before? Or are you one of those vibrants with "locked download?"

I have a feeling mines locked, Ive never used the buttons to successfully get into download mode, just adb reboot download
EDIT: Tried the posts suggestions, problem is second I plug in the USB and the battery pops up it goes right to recovery. Even if im holding the buttons before hand.

Viralblack said:
I have a feeling mines locked, Ive never used the buttons to successfully get into download mode, just adb reboot download
EDIT: Tried the posts suggestions, problem is second I plug in the USB and the battery pops up it goes right to recovery. Even if im holding the buttons before hand.
Click to expand...
Click to collapse
x_x don't know what to tell you then. With locked hardware, you have to be really careful because if something goes wrong you cant manually get back in there. Do you have Clockwork Recovery? try restoring to a previous nandroid backup.

zephiK said:
x_x don't know what to tell you then. With locked hardware, you have to be really careful because if something goes wrong you cant manually get back in there. Do you have Clockwork Recovery? try restoring to a previous nandroid backup.
Click to expand...
Click to collapse
I was working with that a bit, but it just kept getting to datadata and being unable to wipe or flash to it due to the odin botch. I tried wiping it clean and it just wouldnt let me do that to reflash.
So now im stuck at the samsung recovery screen without the ability to get into clockwork or flash lol
This smells like 130 bucks for a new phone I think... brick number two >.>

Viralblack said:
I was working with that a bit, but it just kept getting to datadata and being unable to wipe or flash to it due to the odin botch. I tried wiping it clean and it just wouldnt let me do that to reflash.
So now im stuck at the samsung recovery screen without the ability to get into clockwork or flash lol
This smells like 130 bucks for a new phone I think... brick number two >.>
Click to expand...
Click to collapse
Why did you change update.zip? Update.zip should always lead to Clockwork :|

zephiK said:
Why did you change update.zip? Update.zip should always lead to Clockwork :|
Click to expand...
Click to collapse
I didnt! But when I was formatting and it failed to reapply the nandroid completely cause of the section it couldnt mount, now when I hit reinstall packages it just reboots. Same with shell, it just yells at me and tells me to die in a fire.

if you didnt figure this out, the way to fix it is to first flash WITH ODIN the original JVD firmware and check repartition, then flash the new one IN ODIN without the repartition box checked.
first update includes the dbdata that the phone is looking for.

Yeah, I figured it out now, but Odin is seriously the devil if your phone doesnt have the hardware buttons enabled.

Now heres a question, if I can still get into stock recovery... is there a way to like, you know, recover using the stock system? lol

BUT THE GOOD NEWS IS that Tmo is letting me warranty out my phone for free, shipping me a new one, and gave me a loner while I wait.
TMo for the win.

Viralblack said:
BUT THE GOOD NEWS IS that Tmo is letting me warranty out my phone for free, shipping me a new one, and gave me a loner while I wait.
TMo for the win.
Click to expand...
Click to collapse
lol looks like you and I are in the same boat man. Hardware lock FTMFL. I have never been able to get into download mode, or recovery mode with the hardware keys, only with adb reboot recovery/download and terminal emulator app with SU privs. I wish there was a jumper we could reset to unlock it haha that'd be the s*# son. Good old pentium 133 in the palm of the hands, but no . Atleast they are taking care of the people who don't do things properly.

I did the same thing and ended up with the same problem, but i was able to get in into download mode. When i would plug it in it would try to boot into recovery after the battery screen i would use the keys to make it boot to download mode instead of recovery, it was a *****, but i got it, though idk if there is another way for people with locked down phones.

[Q] boot loop maybe

Hi
I think* i was trying to do a back up or custom recovery just before it went pear shaped, phone froze and i took the battery out and then ->
The phone doesn't get past boot image ( custom boot image of terminators from the movie ).
I have tried factory reset , trying different roms on sd card and then booting into recovery - but i only had the default recovery on the phone.
I have a kdz file image and a few dz files as well as zip but they don't 'work' , even if i rename them 'update'
The lg support tool gets to a point where it says ' super duper bad , your fxxxxd or fatal error or something so it wont even start a fix or update.
'Unkdzing' only gives me a dz file and .dll
I tried uptestEX ,dzextract,lgflashmuncher,expand,lgextract and extractor kdz - but on that it stops with some WMD warning - in spanish i think.
This is the 5th day ive tried to fix the prob but i fail.
After I un screw the phone can it be flashed/shocked with electricity on the part that holds the info ? ( thought id ask before going ahead and doing it anyways )
The phone is rooted

try this
Thiswilldo said:
Hi
I think* i was trying to do a back up or custom recovery just before it went pear shaped, phone froze and i took the battery out and then ->
The phone doesn't get past boot image ( custom boot image of terminators from the movie ).
I have tried factory reset , trying different roms on sd card and then booting into recovery - but i only had the default recovery on the phone.
I have a kdz file image and a few dz files as well as zip but they don't 'work' , even if i rename them 'update'
The lg support tool gets to a point where it says ' super duper bad , your fxxxxd or fatal error or something so it wont even start a fix or update.
'Unkdzing' only gives me a dz file and .dll
I tried uptestEX ,dzextract,lgflashmuncher,expand,lgextract and extractor kdz - but on that it stops with some WMD warning - in spanish i think.
This is the 5th day ive tried to fix the prob but i fail.
After I un screw the phone can it be flashed/shocked with electricity on the part that holds the info ? ( thought id ask before going ahead and doing it anyways )
The phone is rooted
Click to expand...
Click to collapse
have you tried all methods here
http://forum.xda-developers.com/showthread.php?t=2068321

Hi
Yeah I tried those and those led me to other links of people trying other methods but none of them worked out.
Basically I think I need to shelf the phone until there's a boot loader - that should fix most/all problems shouldn't it ?
I like the phone so I'll order another one same colour same place same bat channel :good:

did you change or reinstall busybox

busy box was changed days before

Thiswilldo said:
busy box was changed days before
Click to expand...
Click to collapse
but i am sure, you didn't rebooted before this after replacing busybox. Busybox takes effect after reboot.

yeah i agree as its exactly the same as happened to my phone, i had installed busybox 1.20 and didnt reboot then a while later the phone froze and when i rebooted it stuck at boot logo

I was doing a few things with the phone so yeah, you're probably right.
So is there a fix ?

Thiswilldo said:
I was doing a few things with the phone so yeah, you're probably right.
So is there a fix ?
Click to expand...
Click to collapse
hello
the way i fixed it is explained in the following link(the last post)
http://forum.xda-developers.com/showthread.php?t=2068321&page=3
good luck and feel free to ask if you become stuck,im certain that if its something i dont know then there will be someone here

friartuckme said:
hello
the way i fixed it is explained in the following link(the last post)
http://forum.xda-developers.com/showthread.php?t=2068321&page=3
good luck and feel free to ask if you become stuck,im certain that if its something i dont know then there will be someone here
Click to expand...
Click to collapse
I tried and it didn't work
What should the screen look like when its plugged in and turned on ? , I did the vol + power key and its statiky* and sometimes vibrates. So i tried vol - and power, vol + and home and power, vol - and home and power but total commander still didn't see the phone connected to it.
I extracted adb to total commander and i click on it when total commander is open then I have to click connect to device then a box pops up and i input COM4 ( matched it up with device manager ) but nothing happens.
The only 'normal' screen is when it is in sw update mode, other than that its either grey or pink or white and vibrates at times with all sometimes.
Ok I tried vol + and power with the battery in and when i click on adb the device ID is shown but when i click on that, its totally empty.. no folders or files , completely blank.
Also next to the network 3 pc image it still says [none]
When i try to copy the new busybox to the device id it says 'please remove the write protection'.. so I right click the busybox file and click unblock but same message again
It has full permissions.

you need to keep hold of the keys until it starts up.it will vibrate and screen will go blank about 2 times before it boots into the correct mode,sorry i didnt think of writing that into my other post

friartuckme said:
you need to keep hold of the keys until it starts up.it will vibrate and screen will go blank about 2 times before it boots into the correct mode,sorry i didnt think of writing that into my other post
Click to expand...
Click to collapse
yeah it takes like 5 seconds for it to reboot and then the 'notice' screen appears, but still it says ' please remove the write protection '

Also noticed on my pc under device manager that android adapter has yellow triangle.
I went to LG site and got the driver but it didn't install, even found generic driver but it didn't install, also let windows find one but it didn't install, also tried manually but android driver just wont install.
My understanding is without that android driver total command won't work.

hi sorry to hear your still having problems, all i can suggest is uninstall the drivers and reinstall without the device connected,also are you leaving it til it comes to the screen has a window with a phone and and cables with a red hand covering them,
the driver that you really need it too load is the called Android Sooner single ADB Interface, as far as im aware that when booting into this mode it doesnt load your currently corrupted system files maybe after you retry installing it should hopefully work also if you havent already installed the lg support tool then it would be easier for you to install that and install the drivers that way,they can be found through the following link
http://www.lg.com/uk/support/mobile-support
il have a good think and look at what could be the problem if you are still having problems

yeah I have that driver and two others, nothing is working unfortunately

[Q] Rooted my LG p880, and now it won't start

Hi!
I just rooted my brand new LG optimus 4x HD, and when I was going to install cyanogenmod on it, the phone stopped working. I pressed to restart in recovery and installing the rom, but when it was about to restart, it only says something like: unrecoverable boot loader, and something with kernel. I don't know what this means, but I hope there is a way to fix this, because the phone is brand new, and now I can't even start it.
Some suggestions?

Taynor said:
Hi!
I just rooted my brand new LG optimus 4x HD, and when I was going to install cyanogenmod on it, the phone stopped working. I pressed to restart in recovery and installing the rom, but when it was about to restart, it only says something like: unrecoverable boot loader, and something with kernel. I don't know what this means, but I hope there is a way to fix this, because the phone is brand new, and now I can't even start it.
Some suggestions?
Click to expand...
Click to collapse
Just flash original stock KDZ file with kdz flasher.

If you want to install CM, you do not need a rooted phone, but an unlocked bootloader.
Check the respective threads for details on how to unlock the phone and then flash CM.

Taynor said:
Hi!
I just rooted my brand new LG optimus 4x HD, and when I was going to install cyanogenmod on it, the phone stopped working. I pressed to restart in recovery and installing the rom, but when it was about to restart, it only says something like: unrecoverable boot loader, and something with kernel. I don't know what this means, but I hope there is a way to fix this, because the phone is brand new, and now I can't even start it.
Some suggestions?
Click to expand...
Click to collapse
try flashing the stock rom again
to fix this problem
seems like something went wrong maybe
go in dev section to find how

Soul reaper said:
try flashing the stock rom again
to fix this problem
seems like something went wrong maybe
go in dev section to find how
Click to expand...
Click to collapse
But how am I supposed to do anything when I can't even start my phone? :/

Taynor said:
But how am I supposed to do anything when I can't even start my phone? :/
Click to expand...
Click to collapse
Enter software upgrade mode. Better yet http://forum.xda-developers.com/showthread.php?t=2069723

anGel_pLayer said:
Enter software upgrade mode. Better yet http://forum.xda-developers.com/showthread.php?t=2069723
Click to expand...
Click to collapse
ok, i'll try that in a couple of hours when I get home, Thanks everyone! I'll be back if there is another problem

in the lg pc suite that comes with the phone there is an option in "Device" for "emergency firmware recovery" this should be a relatively easy way to restore your phone if it allows you to do it without booting up otherwise use the method posted earlier. to get into the correct mode on the phone turn phone off, then whilst holding vol- plug in the usb (don't press power button) this should enter software upgrade mode.
after this you will lose root and if you unlocked your bootloader will relock it.
i used this http://forum.xda-developers.com/showthread.php?t=2256392 all in one tool to root and this http://forum.xda-developers.com/showpost.php?p=40918727&postcount=108 to unlock bootloader, you can use the all in one tool (from rooting) to install cwm after you have unlocked bootloader.
I hope this helps

maff90 said:
in the lg pc suite that comes with the phone there is an option in "Device" for "emergency firmware recovery" this should be a relatively easy way to restore your phone if it allows you to do it without booting up otherwise use the method posted earlier. to get into the correct mode on the phone turn phone off, then whilst holding vol- plug in the usb (don't press power button) this should enter software upgrade mode.
after this you will lose root and if you unlocked your bootloader will relock it.
i used this http://forum.xda-developers.com/showthread.php?t=2256392 all in one tool to root and this http://forum.xda-developers.com/showpost.php?p=40918727&postcount=108 to unlock bootloader, you can use the all in one tool (from rooting) to install cwm after you have unlocked bootloader.
I hope this helps
Click to expand...
Click to collapse
I tried to root via the all-in-one toolbox, but I don't get how I am supposed to do... And after trying to do some things and factory resets, I'm unable to start my phone again. This time i'm stuck on bootscreen. And I can't seem to get to the S/W Upgrade screen again, i don't know why...
Is there something i can do with ADB sideload?

Taynor said:
I tried to root via the all-in-one toolbox, but I don't get how I am supposed to do... And after trying to do some things and factory resets, I'm unable to start my phone again. This time i'm stuck on bootscreen. And I can't seem to get to the S/W Upgrade screen again, i don't know why...
Is there something i can do with ADB sideload?
Click to expand...
Click to collapse
Open and reinsert your battery. It may help.
It helped me when couldn't get into s/w upgrade mode after flashing CyanogenMod RC2.

Subhajitdas298 said:
Open and reinsert your battery. It may help.
It helped me when couldn't get into s/w upgrade mode after flashing CyanogenMod RC2.
Click to expand...
Click to collapse
I try to flash to RC2 too... But without success. How do I get into S/W Upgrade mode? nothing works, and holding down volume button doesn't make anything happen :/

Taynor said:
I try to flash to RC2 too... But without success. How do I get into S/W Upgrade mode? nothing works, and holding down volume button doesn't make anything happen :/
Click to expand...
Click to collapse
to get into S/W upgrade mode, remove battery, insert battery, hold the vol-, and plug in a usb attached to a computer (keep holding vol-).
hope this helps. also try a different pc usb port or a different cable (just to eliminate any variables)

maff90 said:
to get into S/W upgrade mode, remove battery, insert battery, hold the vol-, and plug in a usb attached to a computer (keep holding vol-).
hope this helps. also try a different pc usb port or a different cable (just to eliminate any variables)
Click to expand...
Click to collapse
For how long do I need to hold down the volume button?

Taynor said:
For how long do I need to hold down the volume button?
Click to expand...
Click to collapse
it should only be about 15secs before the s/w update mode starts
just to make it clear i made a video http://www.youtube.com/watch?v=F0Vw-ZTr3xY

maff90 said:
it should only be about 15secs before the s/w update mode starts
just to make it clear i made a video http://www.youtube.com/watch?v=F0Vw-ZTr3xY
Click to expand...
Click to collapse
Thank you so much for the video, it worked and now my phone is rooted and alive, now I just have to figure out how to flash a custom rom into it and the CMW recovery...

Good to see you ok. CWM needs unlocked bootloader not just root.
Taynor said:
Thank you so much for the video, it worked and now my phone is rooted and alive, now I just have to figure out how to flash a custom rom into it and the CMW recovery...
Click to expand...
Click to collapse
I don't know why didn't you understand my words but glad that you are running well now. For CWM or a custom rom, you need unlocked the bootloader not root.

I've managed to fix it now, I don't know how, but it worked thanks everyone for the help, running cm10.1 now

Is there anyway i can dowbload lg+ tag and quick memo? It isnt included in the rom :/

No, but I did a factory reset and flashed the rom, and then the stock apps werent included

astr_x said:
If you want to install CM, you do not need a rooted phone, but an unlocked bootloader.
Check the respective threads for details on how to unlock the phone and then flash CM.
Click to expand...
Click to collapse
Hi astr_x,
Do you have any example links for the respective threads you mention? I have tried adb and fastboot. I hold Volume down + plug into my computer and I get the Unrecoverable bootloader error that was mentioned above. In fact, I get this error even when I plug my phone to a normal plug (and not PC). Anyway, I connect my phone to my laptop (I always get the error mentioned) and when I type the relative adb+fastboot command in cmd (after installing all the relative drivers), I get "Error: Unknown device".
Any thoughts?

[SOLVED] I'm possibly bricked.

Okay, so, I know it's possible to fix this, it has to be. And let me explain why I can conclude this.
1.) I can access Philz recovery but ONLY when forcing the phone to hard reset via buttons.
2.) The touchscreen works in the recovery when resetting but doesn't go to the main menu or anything to restore a backup.
3.) The phone will recognize adb commands from the computer, but since the touches don't work when booted I cannot select the "allow this computer" prompt.
4.) The phone boots into the CM11 ROM and the buttons work (I can change volume, take screenshots, and access power menu.)
So, I'll explain what happened. I tested a boot.img for Quarx and flashed it. I didn't reboot my phone, just let it stay on. It worked and everything, but a little bit after church it rebooted on me and showed the CM setup menu. I was like, "What? Okay..." So I was going trying to make it work, but I realized the touchscreen wouldn't respond to my touches. I locked/unlocked the screen, rebooted, all that good stuff, and none of it worked. So, here's the damage done.
1.) I can't touch anything on the screen. It won't respond to touches.
2.) I cannot access recovery, only hard reset.
3.) I cannot approve adb commands because I need to hit "allow" on the screen. (The prompt does come up though)
So, I have a phone that boots, responds to hardware actions, and can recognize adb commands, but won't accept them unless I say "allow." I can access recovery but only when factory resetting through holding Power + VOL DOWN when booting. The touchscreen works in recovery, but it won't do any actions (back, home, etc.) because it's resetting. After resetting it boots instantly, and voila, my problem remains.
So in short, I need a way to bypass that "authentication" for adb, because in order for fastboot to recognize my device I need to run adb commands to set it up (since that's gone too now). That, or, I need to find a way to access Philz recovery without having to use the touchscreen. It's so frustrating because the one button I need to press is literally right in front of my face, on my screen, but it won't respond to my input.
Does anybody here have any suggestions? I haven't been able to flash a KDZ successfully, I don't know why. It never works for me on this phone. I was a pro at it on the L9. School begins in a week and I need to have a phone that works, for transportation and such. I'm not really at a point to buy a phone right now either since I'm focusing on buying my first car (yay I guess).
If anyone can help I'd really appreciate it. In fact, I'm even willing to donate money to whomever can point me in the right direction.

http://forum.xda-developers.com/lg-l90/general/guide-flash-stock-kdz-offline-lg-l90-t2803479
follow this guide and reflash KDZ

Ilxaot said:
Okay, so, I know it's possible to fix this, it has to be. And let me explain why I can conclude this.
1.) I can access Philz recovery but ONLY when forcing the phone to hard reset via buttons.
2.) The touchscreen works in the recovery when resetting but doesn't go to the main menu or anything to restore a backup.
3.) The phone will recognize adb commands from the computer, but since the touches don't work when booted I cannot select the "allow this computer" prompt.
4.) The phone boots into the CM11 ROM and the buttons work (I can change volume, take screenshots, and access power menu.)
So, I'll explain what happened. I tested a boot.img for Quarx and flashed it. I didn't reboot my phone, just let it stay on. It worked and everything, but a little bit after church it rebooted on me and showed the CM setup menu. I was like, "What? Okay..." So I was going trying to make it work, but I realized the touchscreen wouldn't respond to my touches. I locked/unlocked the screen, rebooted, all that good stuff, and none of it worked. So, here's the damage done.
1.) I can't touch anything on the screen. It won't respond to touches.
2.) I cannot access recovery, only hard reset.
3.) I cannot approve adb commands because I need to hit "allow" on the screen. (The prompt does come up though)
So, I have a phone that boots, responds to hardware actions, and can recognize adb commands, but won't accept them unless I say "allow." I can access recovery but only when factory resetting through holding Power + VOL DOWN when booting. The touchscreen works in recovery, but it won't do any actions (back, home, etc.) because it's resetting. After resetting it boots instantly, and voila, my problem remains.
So in short, I need a way to bypass that "authentication" for adb, because in order for fastboot to recognize my device I need to run adb commands to set it up (since that's gone too now). That, or, I need to find a way to access Philz recovery without having to use the touchscreen. It's so frustrating because the one button I need to press is literally right in front of my face, on my screen, but it won't respond to my input.
Does anybody here have any suggestions? I haven't been able to flash a KDZ successfully, I don't know why. It never works for me on this phone. I was a pro at it on the L9. School begins in a week and I need to have a phone that works, for transportation and such. I'm not really at a point to buy a phone right now either since I'm focusing on buying my first car (yay I guess).
If anyone can help I'd really appreciate it. In fact, I'm even willing to donate money to whomever can point me in the right direction.
Click to expand...
Click to collapse
I hate to say it but Factory Reset appears to be your only option for a fix.

Maybe this is a long shot but check out this thread

shinobisoft said:
I hate to say it but Factory Reset appears to be your only option for a fix.
Click to expand...
Click to collapse
Reset doesn't fix it because the boot.img is still the messed up one.
shinobisoft said:
Maybe this is a long shot but check out this thread
Click to expand...
Click to collapse
I cannot enable USB debugging to use that since the screen doesn't work and it reset itself.

gdjindal said:
http://forum.xda-developers.com/lg-l90/general/guide-flash-stock-kdz-offline-lg-l90-t2803479
follow this guide and reflash KDZ
Click to expand...
Click to collapse
I've tried that but it doesn't work for me. I need someone that can do it for me or something, because the KDZs never flash

@Ilxaot
are able to use philz??? fully...means is touch working on philz???
if yes then
you can put aroma file manager there...and in root of it in default.prop
change the lines
ro.adb.secure=1
ro.secure=1
to
ro.adb.secure=0
ro.secure=0
and reboot
now you have adb access without any confirmation required....
this is possible only if philz is working...
best luck...
and remove every possible LG driver from your pc
then reboot
connect to the internet
dont install drivers manually
let windows find the drivers if it doesnt find one.
then just reboot
after rebooting install drivers manually.
this works form me everytime.

k2wl said:
@Ilxaot
are able to use philz??? fully...means is touch working on philz???
if yes then
you can put aroma file manager there...and in root of it in default.prop
change the lines
ro.adb.secure=1
ro.secure=1
to
ro.adb.secure=0
ro.secure=0
and reboot
now you have adb access without any confirmation required....
this is possible only if philz is working...
best luck...
and remove every possible LG driver from your pc
then reboot
connect to the internet
dont install drivers manually
let windows find the drivers if it doesnt find one.
then just reboot
after rebooting install drivers manually.
this works form me everytime.
Click to expand...
Click to collapse
The only way I can boot into Philz is when it's factory resetting. When it's resetting, it shows the recovery and everything, but it's just resetting. There are no options to flash anything and such. It just resets and reboots.
EDIT - If I could get a KDZ to flash, I'd be set. When I connect my phone in laf mode (s/w mode) my computer doesn't recognize it. It says it's an unknown USB device, and shows a warning symbol next to it in the device manager. If I could get that fixed, I might be able to flash!

The recovery you use was not ok
Its gave me same problem when i try it,thank God i can enter download mode to flash KDZ and back to TWRP.
But what that is amazing me about your is that its cant do what other D415 does why? did your own D415 is special.
Also another thing is USB debugging,If you using CM11 by Quartz it was enable by default in that rom

4peace1 said:
The recovery you use was not ok
Its gave me same problem when i try it,thank God i can enter download mode to flash KDZ and back to TWRP.
But what that is amazing me about your is that its cant do what other D415 does why? did your own D415 is special.
Also another thing is USB debugging,If you using CM11 by Quartz it was enable by default in that rom
Click to expand...
Click to collapse
Yes but I still need to accept the prompt asking if I want to allow the computer to access the phone, which I cannot do because the screen does not respond.
How did you manage to flash the KDZ? I know it will be fixed if I can flash it, but I'm not having any luck flashing it! It keeps saying that the device is unknown, even though I've installed and uninstalled the drivers countless times.

Ilxaot said:
Yes but I still need to accept the prompt asking if I want to allow the computer to access the phone, which I cannot do because the screen does not respond.
How did you manage to flash the KDZ? I know it will be fixed if I can flash it, but I'm not having any luck flashing it! It keeps saying that the device is unknown, even though I've installed and uninstalled the drivers countless times.
Click to expand...
Click to collapse
I used this file here http://forum.xda-developers.com/lg-l90/general/guide-flash-stock-kdz-offline-lg-l90-t2803479
I entered download mode by remove my battery,unplug cable,
Then insert the battery back and press volume up key(hold it ),then insert the usb cable
after seen download headline then press power key it will take you to firmware update

4peace1 said:
I used this file here http://forum.xda-developers.com/lg-l90/general/guide-flash-stock-kdz-offline-lg-l90-t2803479
I entered download mode by remove my battery,unplug cable,
Then insert the battery back and press volume up key(hold it ),then insert the usb cable
after seen download headline then press power key it will take you to firmware update
Click to expand...
Click to collapse
I tried that guide last night. The LG tool just has a bunch of question marks instead of text, is that normal?

Ilxaot said:
I tried that guide last night. The LG tool just has a bunch of question marks instead of text, is that normal?
Click to expand...
Click to collapse
yes

4peace1 said:
yes
Click to expand...
Click to collapse
Okay, I'll keep trying. When you booted into download mode, did your computer say the USB device was unknown?

Ilxaot said:
Okay, I'll keep trying. When you booted into download mode, did your computer say the USB device was unknown?
Click to expand...
Click to collapse
nope may you need to change the cable or try another port

4peace1 said:
nope may you need to change the cable or try another port
Click to expand...
Click to collapse
Can you give me the link to the kdz you used? I feel that's the problem. It gets stuck at 2%, and another user said he changed KDZs and it worked fine. I got my computer to recognize it, now I just need it to flash it lol.. It's really depressing how something as incredibly stupid as a KDZ flash is holding me back, and nobody's suggestions seem to be working. About to just give up and not even care about mobiles anymore >.<

http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW015106432109876543213/D41010c_00.kdz
this is a kdz for d410 indian variant.
i dont know your model no.

k2wl said:
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW015106432109876543213/D41010c_00.kdz
this is a kdz for d410 indian variant.
i dont know your model no.
Click to expand...
Click to collapse
I actually just fixed it as you responded! Thanks mate!

you are welcome...so what about a nice unbricking guide from your experiences????
i think others will contribute so that we can make a good unbricking thread for l90...

k2wl said:
you are welcome...so what about a nice unbriking guide from your experiences????
i think others will contribute so that we can make a good unbricking thread for l90...
Click to expand...
Click to collapse
The guide that I followed was the one about flashing KDZs in thy general section. The problem I had was that my KDZ that I downloaded was corrupt somehow, so I had to find a working one!!