i found the link for the test mode fix but when i click it this pops up "Opps google could not find this webpage" along with some othe links i have tried like the revolt rom and othe roms they says "this is not available currently in your area" please help me i am trying to find a custom rom for my phoneand play around with it til i find one i like
Related
Well, the title says it all, I was one of the idiots that deleted the im plugins without proprerly backing up and now I cannot access the market. I have already tried to flash to the new custom rom in hopes of getting my market access back, but for some reason no matter how many times I try the rom keeps coming up with errors ( see the last page in the custom rom thread to see if you have a fix for that ) However becasue the only thing wrong with my phone is the lack of access to the market, all I need is for someone to kindly supply me with the files for the market, and maybe also the im plugins I deleted, seeing those casued the problem, and I can just re-load them my self from adb. Someone please help me out.
Hey guys. I tried asking these questions on the official thread of this Rom but somehow my post is getting lost in the tons of pages which are accumulating everyday So here are my questions :
y2jamit said:
Alright folks. I finally managed to move from CM6 stable to NXSense. Before moving from CM 6, I partitioned my SD card using Rom manager with a partition of 512 MB & a swap of 32 MB.I managed to install version eViL-NXSense-v.1.13.1. However after that eViL-Q&D-NXSense-v.1.14.1 was released. So I downloaded that first from the 4shared link. I tried to install the new ROM from Rom Manager using the wipe option. However when the phone goes into recovery it shows formatting blah blah blah and then phone doesn't install the 1.14.1 Rom and reboots and gets stuck on the Google cross logo.
I managed to restore back to 1.13.1 from the back up that I had made. Now instead of using the Rom Manager I booted into recovery and tried to use the install from SD card option. This time the phone started copying files and showed that twice. After this I get the following huge error:
E: Can't symlink /system /customize/resource/bootanimation.zip
E: Failure at line 27:
symlink/data/local/bootanimation.zip
SYSTEM : customize/resource/bootanimation.zip
Installation aborted.
I had to once again resort back to my backup. Can anyone help me out this issue?
After all this I even tried to install 1.13.1 from the recovery using the install from sd card option and apparently this also gave me the exact same bootanimation error. So I guess both the zips are ok. not sure what else could be going wrong.
Also even after flashing networkfix on 1.13.1, the market still struggles to work. It shows loading for some time and then gives an option to retry. However if I try to search for any application or go to downloads, the market starts working normally. Can anyone also provide a fix for this problem?
I really want to use this as my default rom because I am in love with it Excellent work Evil !!! Just want to sort out these issues.
Click to expand...
Click to collapse
In addition to the above mentioned post, I wanted to add that I now also have a2sd enabled after running the commands from terminal emulator. What is the simplest way to update from 1.13.1 to a higher version? Also when loading market for the first time, the GPRS connection disappears and comes back in like a minute. Why is this happening? When using Trackball Alert Pro the patch option says compatible rom not found but the alerts are working fine When using wi-fi hotspot and default options, it is not getting turned on although 3G shows in the top left corner. Do I have manually change any settings.
I would be highly grateful if anyone can resolve all or any of my queries. I am absolutely exhausted in asking these queries in the official thread and reading through tons of pages just to see my query being buried.
Thanks in advance guys.
Alright guys I managed to install 1.14.1 successfully by doing a full wipe first using instructions from this fabulous thread http://forum.xda-developers.com/showthread.php?t=747381 Although this thread is for myTouch 3G Slide, the basic instructions are the same for Nexus One. You just have to use the trackball to select an option. This is exactly what I was looking for I am sure many newbies like me who don't know what a full wipe is, will learn a lot from this magnificent thread. Thank you kingofyo1
Now I still don't understand why the patch option in Trackball Alert Pro shows the rom is not compatible even though basic version is officially provided with the rom. Anyway the alerts work, so I am not going to waste any more time on it.
Even in eViL-Q&D-NXSense-v.1.14.1, when I first open market, my GPRS connection disappears and comes back in like 20-30 seconds. After that market works really well. Anyone has a solution for this?
Also Wi-Fi hotspot still doesn't turn on using default settings. Do I have to manually choose any settings?
Can anyone shed some light on the above mentioned questions?
Hello everyone,
i have a weird problem right now.... i am using Windows 7 - btw i F-ing LOVE IT!!! and i'm trying to get my Galaxy i9000T to Froyo or Gingerbread... i might not know what the difference is or even if they are different things... if someone could explain this it would be great... i've search everywhere in this website and i've found answers as to how to upgrade my phone, but nothing seems to work, so this is my last resort right here....
the reason why i need to enter download mode and flash my phone is because i had it with Gingerbread, but for some reason my "soft keys" where acting erratically, so i found these ROM:
- CODE_I9000TUBJI1_AP_PDA_CL568719
- CSC_I9000TUUBJI1_MULTI_UUB
- MODEM_I9000TUBJH1_CP_PHONE
and my phone came back to life , but after this my phone cannot go into download mode to get the updated firmwares....
i've found numerouos options in this site to get into download mode but none work, this includes Android SDK, removing and holding the battery.
once i get into download mode then i don't know how to get Froyo or gingerbread in my phone again??
WolfShooterX said:
Hello everyone,
i have a weird problem right now.... i am using Windows 7 - btw i F-ing LOVE IT!!! and i'm trying to get my Galaxy i9000T to Froyo or Gingerbread... i might not know what the difference is or even if they are different things... if someone could explain this it would be great... i've search everywhere in this website and i've found answers as to how to upgrade my phone, but nothing seems to work, so this is my last resort right here....
the reason why i need to enter download mode and flash my phone is because i had it with Gingerbread, but for some reason my "soft keys" where acting erratically, so i found these ROM:
- CODE_I9000TUBJI1_AP_PDA_CL568719
- CSC_I9000TUUBJI1_MULTI_UUB
- MODEM_I9000TUBJH1_CP_PHONE
and my phone came back to life , but after this my phone cannot go into download mode to get the updated firmwares....
i've found numerouos options in this site to get into download mode but none work, this includes Android SDK, removing and holding the battery.
once i get into download mode then i don't know how to get Froyo or gingerbread in my phone again??
Click to expand...
Click to collapse
Found some thread
http://forum.xda-developers.com/showthread.php?t=821698
you could try starting download mode with adb... or with a homemade jtag (worked for me everytime)
Yea try usb jig.. lots of thread here that'll help and plus if u dont want to do it on your own, amazon sells it..
use the usb jig!
Hi all,
This is my first post on XDA, but have found it useful in the past when needing info for my original G1 and later my HTC Desire, both of which I rooted and added custom roms on via the threads here.
Now though I am really stuck having cocked up an attempt to install Cyanogenmod 10.2 on my 4X HD.
I have a black screen with red text saying "Stuck on Critical Failure:Unable to start Kernel." and a few more lines.
I initially followed a guide at AndroidLegend but because the links in this guide went to Nightly's for 10.2 I decided to download a stable 10.1 instead. I can't post the link but the comments show the problems I was having.
The end result was that I never managed to install 10.1 and had just gone back to the original factory settings, but along the way on another forum I saw someone mention that the ROM may have the original phone name wrong and to take out the assert name in a config file, which I did (now knowing that that was the last thing I should have done). So upon rebooting I ended up where I am now.
I have searched thoroughly on these forums and have tried numerous fixes none of which none have been successful.
The one that I feel comes closest is this one by RuedasLocas (post number 7) on "Rollback Optimus 4X HD from 4.1.2 JellyBean to 4.0.3 Stock ICS"
I've followed it exactly and tried 3 or 4 times on different PC's and although I can see the phone in Device Manager and change port settings (LGE CDMA USB Serial Port to 41) etc, I never get beyond LGFlash Tool changing from "waiting" to anything downloading in Blue or failing in Red, nothing happens and my phone will just sit there in SafeMode whilst plugged in.
Can anyone suggest anything else that I need to do?
Many thanks if you got this far!
Snookered said:
Hi all,
This is my first post on XDA, but have found it useful in the past when needing info for my original G1 and later my HTC Desire, both of which I rooted and added custom roms on via the threads here.
Now though I am really stuck having cocked up an attempt to install Cyanogenmod 10.2 on my 4X HD.
I have a black screen with red text saying "Stuck on Critical Failure:Unable to start Kernel." and a few more lines.
I initially followed a guide at AndroidLegend but because the links in this guide went to Nightly's for 10.2 I decided to download a stable 10.1 instead. I can't post the link but the comments show the problems I was having.
The end result was that I never managed to install 10.1 and had just gone back to the original factory settings, but along the way on another forum I saw someone mention that the ROM may have the original phone name wrong and to take out the assert name in a config file, which I did (now knowing that that was the last thing I should have done). So upon rebooting I ended up where I am now.
I have searched thoroughly on these forums and have tried numerous fixes none of which none have been successful.
The one that I feel comes closest is this one by RuedasLocas (post number 7) on "Rollback Optimus 4X HD from 4.1.2 JellyBean to 4.0.3 Stock ICS"
I've followed it exactly and tried 3 or 4 times on different PC's and although I can see the phone in Device Manager and change port settings (LGE CDMA USB Serial Port to 41) etc, I never get beyond LGFlash Tool changing from "waiting" to anything downloading in Blue or failing in Red, nothing happens and my phone will just sit there in SafeMode whilst plugged in.
Can anyone suggest anything else that I need to do?
Many thanks if you got this far!
Click to expand...
Click to collapse
when you get to "waiting", plug out your cell phone, eject battery, put the battery back in and hold vol - while plugging it back into comp. lgflashtool should then recognise the device and start flashing.
another thing you can do is use kdz flasher, which has a bit easier interface when compared to lgflashtool.
Many thanks for the speedy reply Flying_Bear, possibly seeing some success, did as you said and a file downloaded to the device, however I am now seeing the image that I have attached.
It looks like it's saying don't remove cable and don't switch off and refresh?
Can you confirm what I should do next?
Thanks again
Snookered said:
Many thanks for the speedy reply Flying_Bear, possibly seeing some success, did as you said and a file downloaded to the device, however I am now seeing the image that I have attached.
It looks like it's saying don't remove cable and don't switch off and refresh?
Can you confirm what I should do next?
Thanks again
Click to expand...
Click to collapse
hmmm, truth to be told, i dont remember seeing that image appear when using lgflashtool. also, i've never seen anyone with similar problem to yours (unable to start kernel)
did you give it some time? if it didnt work, try http://forum.xda-developers.com/showthread.php?t=2069723; it's similar to lgflashtool, but no need to set up ports, and you can track the progress while it's flashing (lParam=x on pictures). try 20a kdz file, if that fails, report here with some more info on what the problem was. hope we can fix things for you
also, can you post the link on tutorial you followed to flash cm, just so i can check what steps you have done? just remove http from the link if you cant post it
Flying_Bear said:
hmmm, truth to be told, i dont remember seeing that image appear when using lgflashtool. also, i've never seen anyone with similar problem to yours (unable to start kernel)
did you give it some time? if it didnt work, try http://forum.xda-developers.com/showthread.php?t=2069723; it's similar to lgflashtool, but no need to set up ports, and you can track the progress while it's flashing (lParam=x on pictures). try 20a kdz file, if that fails, report here with some more info on what the problem was. hope we can fix things for you
also, can you post the link on tutorial you followed to flash cm, just so i can check what steps you have done? just remove http from the link if you cant post it
Click to expand...
Click to collapse
It's working!
Just read your reply and as I wanted to wait to see what you might say I left the phone alone, so it was still attached to the pc showing that image.
I then unplugged it, held the power button down to power it down and then back on again, image of the android came up for a second showing as though it was updating, then the LG logo and then Setup started.
5 minutes later wifi and 3G were working and I was logged into Google.
So problem solved!
I'll hang back from updating further until I've read up more on XDA....thanks so much for your help though!
Hi,
As mentioned above, I managed to soft brick my Galaxy Mini. I see the Samsung logo, but afterwards nothing is happening (Odin sees it, and I also have access to recovery menu and DL menu). I've read the forums, which says, to put back an original ROM, but I cant seem to find one.
I've tried to look up samfirmware.com but there is no download link, as their file host site is down. Is it fine to flash it with a ROM from a different country maybe?
If not, anyone happens to have a hungarian T-mobile original ROM lying around which he could upload somewhere?
Thanks
Not sure about posting this as I've not heard anyone else use this site but I've managed to find a good amount of stock firmwares on SamMobile.
You'll need a login, but search GT-S5570 on the firmwares page and select the original operator/country your phone was from, should give you a package you can flash with odin.