Updater script - Moto X Q&A

Just wondering if someone could fire up an updated script?
I have the system files ready to go but I lack the knowledge to do an updater script.
I am attempting to do a stock deodex rom, your help would be much appreciated
Sent on my Moto X
Just wondering if someone could fire up an updated script?
I have the system files ready to go but I lack the knowledge to do an updater script.
I am attempting to do a stock deodex rom, your help would be much appreciated
No need for update script Mattlgroff has it already, thanks
Sent on my Moto X

Related

[ROM] GladiAtrix for 1.5.2 v0.3 *UPDATED 03-26-2011*

GladiAtrix for OLYFR_U4_1.5.2 v0.3
Deodexed the 1.5.2 SBF and repackaged everything up, including the WiFi and Market fixes. Just like Adeo, you do not need to root first.
Working on getting the reboot/recovery power options, preferred install location, and unknown sources (this now enables sideloading, though) tweaks installed. The new version adds options to root, add the tethering APN, init.d support and sideloading at the same time this installs.
This is only for AT&T phones running firmware version 1.5.2. If you have 1.2.6 please go here: GladiAtrix for 1.2.6 v1
Come chat with us!​
Features:
Standard Features
Works on rooted and non-rooted devices
Deodexed
Da_G's WiFi fix
ghost_o's Market fix
Ad blocking
v0.2+ Optional Features
Root
Tethering APN
Sideloading
init.d support
​
Installation instructions:
Read the instructions all the way through before starting
Read them again and make sure you understand them
Download the file from the link below
Extract the files to any folder
Connect your phone with USB debugging, set USB mode to none (unsure if this is required, but I always do it to be safe)
Run INSTALL.bat
Follow the on-screen instructions for rooting, sideloading, tethering APN, and init.d support
Confirm installation of the ROM
Wait PATIENTLY for it to finish and reboot your phone
Read disclaimer below
​
DISCLAIMER: I've only tested this on my device. I ran it twice to be sure, once with aRoot, once without, both on fresh SBF reflash. I am not responsible if this bricks you.​
Download Links
Direct Download Link: http://goo.gl/B8T6L
Alternate Download Link: http://goo.gl/Eue6I​
Changelog:
* Version 0.1
Initial release
* Version 0.2
Updated installer script
Added options for rooting, tethering apn, sideloading, and init.d support.
* Version 0.3
Major improvements to installer script
Fixed syntax bug on root/tethering/sideloading/init.d to make it function properly again
​
Notes/thanks:
I have not tested the wifi fix as I haven't had any wifi issues in the first place. If someone could confirm this, I would appreciate. Feel free to PM me if you have any issues or see anything that needs to be changed.
Special thanks to: Da_G for wifi fix, ghost_o for market fix, designgears for the use of his Adeo and aRoot scripts, Sogoth for the batch sorcery, and gitbrew.org for hosting​
Reserved
To Do:
Add reboot option to power menu
Add recovery option to power menu
Add support for 1.2.6
Very good work.
great! thank you!
Awesome! I've got GingerBlur but I know a lot of people loved using Adeo and with this update it will help. Good work!
Damn son! I wanna try this but I don't wanna start over from sbf. It scares me to brick though. Lemme know how it goes
Sent from Atrix ;-)
Sweet! Nice job man.
frankiedizzle87 said:
Damn son! I wanna try this but I don't wanna start over from sbf. It scares me to brick though. Lemme know how it goes
Sent from Atrix ;-)
Click to expand...
Click to collapse
There should not be any bricks resulting from this software, the creator just does not want to be held responsible for any mistakes the user may make.
frankiedizzle87 said:
Damn son! I wanna try this but I don't wanna start over from sbf. It scares me to brick though. Lemme know how it goes
Sent from Atrix ;-)
Click to expand...
Click to collapse
Updated first post with instructions and a little more info. This shouldn't brick you if you do everything correctly.
Also, if anyone has run this and can confirm market or wifi fixes for me, I would definitely appreciate.
It won't work on the Bell Atrix, would it?
i.mac said:
It won't work on the Bell Atrix, would it?
Click to expand...
Click to collapse
I don't really see any reason why it wouldn't. You might get the default AT&T apps loaded (which can just be easily removed through the app management in settings), but I find it hard to believe the apps are that much different. I would probably hold off on it, though. If you want to get me a /system dump from a stock Bell Atrix (there might be one already I haven't really looked), I can deodex it and make a new package for it.
Ririal said:
I don't really see any reason why it wouldn't. You might get the default AT&T apps loaded (which can just be easily removed through the app management in settings), but I find it hard to believe the apps are that much different. I would probably hold off on it, though. If you want to get me a /system dump from a stock Bell Atrix (there might be one already I haven't really looked), I can deodex it and make a new package for it.
Click to expand...
Click to collapse
If you tell me how... I would be more that happy to do so.
How to add power menu options. Hope this helps.
http://forum.xda-developers.com/showthread.php?t=811532
doesn't gingerblur already deodexes whatever SBF you have? if so, i don't see the point in this.
Anyway, if you want to enable unknown sources, just download aroot and copy the script from there, it's way easy, it's just a sql statement via sqlite to make it happen.
franciscojavierleon said:
doesn't gingerblur already deodexes whatever SBF you have? if so, i don't see the point in this.
Anyway, if you want to enable unknown sources, just download aroot and copy the script from there, it's way easy, it's just a sql statement via sqlite to make it happen.
Click to expand...
Click to collapse
Not all of us want a themed device. Some of us want to customize it ourselves. :x
franciscojavierleon said:
doesn't gingerblur already deodexes whatever SBF you have? if so, i don't see the point in this.
Anyway, if you want to enable unknown sources, just download aroot and copy the script from there, it's way easy, it's just a sql statement via sqlite to make it happen.
Click to expand...
Click to collapse
Yes it does, but afaik Gingerblur is optimized for 1.2.6, this is for the leaked 1.5.2 SBF. There were more than a few apps that were updated and are much smoother than the 1.4.6 apps (camera for one), so it's a nice option to have. Also, as darkamikaze mentioned, some people don't want the gingerbread theme stuff. I'm working to get this as close to a stock flash as possible, deodexed, with the basic tweaks and functionality addons that everyone can use without changing too much of the phone functionality.
Is this an update the the ones release last week (redux v.02...)? If so can i just install over the redux v.01.7?
sirkao said:
Is this an update the the ones release last week (redux v.02...)? If so can i just install over the redux v.01.7?
Click to expand...
Click to collapse
No, the other Adeo versions are for the retail SBF (1.2.6) this is for the leaked SBF (1.5.2).
nice,, would like to try
Giving it a try. I haven't come close to flashing my Atrix as much as my Captivate yet.
GingerBlur is giving me some wicked battery life though.
Edit : Maybe some alt download links though. The http://goo.gl/5slwi is killing me.

Help with Rom plz, Devs please help:D

I'm working on a Rom that i was thinking about Releasiing and it was also my first Gingerbread Rom, i have made a couple froyo roms tho for my personal use and i cant seem to get the updater script working with the updater binary... and ive tried almost eveything i can to do it but i have a mac and the options are limited... if anyone could please help me i have attached the updater scrip to the post so that u can check it out and help me thanks in advance
Ive been using Rom kitchen and ammend2edify for Script conversions and its not working i get status 6 error in cwm...
updater script is in 2nd post
Howtomen
here is the attachment
i had to convert it to text and here is the updater script...

V6 Super Charger for ICS!

THIS IS NOT MY WORK! I'M POSTING THIS WITH PERMISSION FROM zeppelinrox
Back in the ancient times (Eclair,Froyo,Gingerbread) the stock android launcher was....Slow to put it nicely. Zeppelinrox wrote a script that changes the oom values inside of android to put the launcher in it's rightful place. No more redrawing launchers weird lagging etc etc. He's done it again for ICS.
This is a little more involved than simply executing a script at boot time though. 4.0 is to Gingerbread what Froyo was to Cupcake! Pretty big differences but if you're up to the challenge then feel free to CLICK HERE http://forum.xda-developers.com/showthread.php?t=991276 and check it out for yourself!
I'm just posting this as an additional bit of information. Dropping in from the MyTouch 4G Forum as I recently got a "broken" vibrant from a customer. (Camera just needed reseating)
Oh boy, I think I'm entering this game! Wish me luck.
Arhg, it's really much to do! Any tutorial? I don't ever know what step I should take first! please, explain us what you did. Thanks!
Say why not attach a patched services.jar
Zeppelinrox, could you please provide us with updated info about the installation process?
I see too many files.
Enviado desde mi SGH-T959 usando Tapatalk
i am using the zenwich beta rom, tried this, but got errors during the script run, so i tried updating the SU binary. I ran into trouble setting permissions on the /system/xbin/su
i was using file expert to change permissions, but i guess that wasn't enough.
does this have to get pushed through adb?
ps, i just flashed the newest zenwich beta...#4, so i have a completely fresh machine.
i also understand that you shouldn't/cant change a file that is in use, aas is the case with the /system/xbin/su
and, does zenwich need this mod?
thanks, 1fd
a patched services.jar would be awesome.
Wouldn't it be....
G00DFe77a said:
a patched services.jar would be awesome.
Click to expand...
Click to collapse
I'm still learning how to do this myself. I posted this so the developers would be aware of it if they felt like incorporating it into a rom.

Need help with a system dump

I am working to build a rom for the atrix hd. I will attach screenshots. I have built the rom and all but the only problem is that it is on my phone and i need to do a system dump so i can turn it into a flashable .zip. I am using ubuntu 12.04 lts. The rom is built from source and includes the touchwiz interface. Gps works and everything else does too. Will someone help me with the system dump so i can share this rom here on xda.
Nevermind I had some help to dump it but now im making the updater script and will upload the new rom by tomorow afternoon

[Q] [UPDATED] Probelm Bootloop error with dsixda's kitchen cooked ROM

Hello guys:laugh:
I searched every forum thoroughly but didn't found a proper and working solution for Xperia devices
I am trying to make a custom ROM from stock using dsixda kitchen
I used stock 12.1.A.201 as the base ROM
I believe that it's either the updater script error or kernel probelm as I am using stock kernel and my zip is like this
Data
META-INF
system
boot.img
check_data_app
Click to expand...
Click to collapse
This happens when rom is created
De-odexed it rooted it and added X-Reality engine and created the rom
First on installing I got error of status 0 so I changed my update binary file from same de-odexed version from this link http://forum.xda-developers.com/showthread.php?t=2704312 by @dipesh1502 (thanks to him for that awesome rom)
Next I am getting error status 7
ROM Starts flashing then it comes to this part
formatting system bla bla
expected 5 args got 3
Click to expand...
Click to collapse
something like that and then it stops on error status 7
here is the updater-script please have a look. I really want to create this ROM. Please help
Updater-Script Download
here is my build prop build.prop download
Help guys please I'll be highly grateful
My device is C5302 rooted and unlocked bootloader with 12.1.A.205 stock kernel
EDIT : Got past the error status 7 now ROM gets installed
But unfortunately now it ends in a bootloop :/ Got stuck on Sony splash logo and then reboots constantly :/
Had a nandroid backup ready x)
Had to flash the ftf file over and over again. :/
Phone is allright just want to catch this error of bootloop.
I changed kernel with the dipesh1502's ROM but still no luck. Modified Updater script but still no luck. help me I am soo confused and screwed!! :'( :'(
My new Updater-Script
There's a HUGE difference in creating boot animations and creating a ROM.
Don't expect to teach yourself how to make a ROM in just a few days.
It takes, weeks, months, years...
If you're mainly planning to make some exterior changes, which I think you're currently doing, I would focus on making complete themes and not ROMs.
People are not waiting for a ROM which is already available but that looks somewhat different and maybe has some extra or removed apps.
Regarding your problem, I will not be able to help you since I don't have that kind of knowledge.
Anyway, good luck!
Gamm86 said:
There's a HUGE difference in creating boot animations and creating a ROM.
Don't expect to teach yourself how to make a ROM in just a few days.
It takes, weeks, months, years...
If you're mainly planning to make some exterior changes, which I think you're currently doing, I would focus on making complete themes and not ROMs.
People are not waiting for a ROM which is already available but that looks somewhat different and maybe has some extra or removed apps.
Regarding your problem, I will not be able to help you since I don't have that kind of knowledge.
Anyway, good luck!
Click to expand...
Click to collapse
Thanks for the reply.
Yeah I know that it's not easy to create ROM and also it takes a lot of time. I am ready to give it a shot
I am just making some small changes just for my sake I'll be using this ROM personally for my own use I know that there are a thousand times better ROM's than mine
Anyway glad you considered my probelm.
Bootloop can be cause by:
- Wrong permissions
- Corrupt installation
It is nice if you collect either the last_ksmg or logcat when bootlooping. (if possible)
~~Regard
---------- Post added at 08:08 PM ---------- Previous post was at 08:04 PM ----------
But first:
Share me the .zip you have created perhaps I can take a small look
~~ Regards
mrjraider said:
Bootloop can be cause by:
- Wrong permissions
- Corrupt installation
It is nice if you collect either the last_ksmg or logcat when bootlooping. (if possible)
~~Regard
Click to expand...
Click to collapse
Thanks for the reply
Can you please have a look at my new updater-script and tell me what is wrong?
I will surely try to get logcat but before that if you can just analyze this updater-script and pinpoint the mistakes it'll make my work a lot easier.
Thanks in advance :good:
Sent me the entire .zip file instead (but start with updater-script)
~~Regards
mrjraider said:
Sent me the entire .zip file instead (but start with updater-script)
~~Regards
Click to expand...
Click to collapse
Sure thing I'll
I am compressing it to maxium extent using KGB archiver and it'll become around 10~20 mb only
It's still compressing so it'll take some time before it reaches it's max compression.
I'll surely send you asap

Categories

Resources