[Q] Problems installing CM TheWhisp on SGM2 - Samsung Galaxy Mini

Hi Guys,
I have a 6500 with NFC. I bought it in Europe, so its not the 6500D.
But i think i have a 6500D bootloader
when rooting with odin: it tells me 6500D
when flashing or restoring with other ROMS, it tells me 7500
strange. ha?
but never the less: i cant install the rom from the.wisp.
it stops in the beginning when checking the phone-model
what did you use when rooting with odin?
thnx

freagle05 said:
Hi Guys,
I have a 6500 with NFC. I bought it in Europe, so its not the 6500D.
But i think i have a 6500D bootloader
when rooting with odin: it tells me 6500D
when flashing or restoring with other ROMS, it tells me 7500
strange. ha?
but never the less: i cant install the rom from the.wisp.
it stops in the beginning when checking the phone-model
what did you use when rooting with odin?
thnx
Click to expand...
Click to collapse
Flash latest CWM 6.0.3.3b2 . I think that you use old CWM v5 which have a lot of bugs and problems.

o yes. i am using 5.0.2.8
hang on a sec. i found this here:
http://forum.xda-developers.com/showthread.php?t=2156194
edit:
ok. thank you. i installed a newer version of the tar.md5-file and i could install the rom. thank you.
when i boot the phone it always stays at the cyanogenmod-logo with the circle turning around. it does not boot till the end.
any ideas?

wipe data/factory reset, cache partition and dalvik cache in advanced menu, before and after installation!

larissamafia said:
wipe data/factory reset, cache partition and dalvik cache in advanced menu, before and after installation!
Click to expand...
Click to collapse
okay, i would like to, but i cant get in the recovery-mode anymore. have the buttons changed? i have installed the cwm-6.0.3.3-b2-jena.tar.md5 with odin. now i cant acess recovery???

freagle05 said:
okay, i would like to, but i cant get in the recovery-mode anymore. have the buttons changed? i have installed the cwm-6.0.3.3-b2-jena.tar.md5 with odin. now i cant acess recovery???
Click to expand...
Click to collapse
Try with s7500 combination

but
xfim said:
Try with s7500 combination
Click to expand...
Click to collapse
i did. no change.
i am either stuck in the
- cyanogenmod-logo-circle
- download-mode
- ramdump mode arm9 mode
i cant enter the recovery-mode anymore. pls help...

hi, i found a solution: i installed stock-rom with odin, made a factory-reset and installed everything again. now it works. tnx. im very happy i got rid of the old software. cm looks and feels much better
but i have a few questions with that rom (30.08):
i installed another file-browser because the shipped one doesent see any files on my external sd-card... what could that be?
i sometimes have the whitescreen-problem. i searched for a solution, but there are several out there...?
in the statusbar there is no button for gps? how can i see that?

freagle05 said:
hi, i found a solution: i installed stock-rom with odin, made a factory-reset and installed everything again. now it works. tnx. im very happy i got rid of the old software. cm looks and feels much better
but i have a few questions with that rom (30.08):
i installed another file-browser because the shipped one doesent see any files on my external sd-card... what could that be?
i sometimes have the whitescreen-problem. i searched for a solution, but there are several out there...?
in the statusbar there is no button for gps? how can i see that?
Click to expand...
Click to collapse
im not curently on CM but go to stock file manager > option > you will find some option to enable your sdcard ( sorry i dont remember entirely but im sure there was something there)
about that white screen bug there is nothing that anybody can do , at least not right now .

For browsing ext sd use ES file explorer (go to / and search for folder external SD)

Related

(Q) Need help BADLY

I got some problem with installing a Custom rom...
I allready got root from superone Click, got Titanium Backup working...
then i installed The clockworkmod (external sd) from the tread in the forum.
then i moved the Custom rom MODACO FR17 Fear edition to my external sd..
booted into CMW by holding VOL DOWN + POWER
backup with nand
then wiped data and Cache
then installed the Custom rom and it went fine it took 3-4 min and then it said ok
I rebooted and i just hanged on the LG LOGO for 10-15 min.
removed the battery and still the same hangs on the LG LOGO
tried flashing it all over but still the same...
i was so lucky that i could restore my backup and now it up running...
can somebody please help me what could have gone Wrong ??
should i try another CWM ??
dk_iceman said:
I got some problem with installing a Custom rom...
I allready got root from superone Click, got Titanium Backup working...
then i installed The clockworkmod (external sd) from the tread in the forum.
then i moved the Custom rom MODACO FR17 Fear edition to my external sd..
booted into CMW by holding VOL DOWN + POWER
backup with nand
then wiped data and Cache
then installed the Custom rom and it went fine it took 3-4 min and then it said ok
I rebooted and i just hanged on the LG LOGO for 10-15 min.
removed the battery and still the same hangs on the LG LOGO
tried flashing it all over but still the same...
i was so lucky that i could restore my backup and now it up running...
can somebody please help me what could have gone Wrong ??
should i try another CWM ??
Click to expand...
Click to collapse
newest CWM is here : http://forum.xda-developers.com/showthread.php?t=1098001
generally, you did everything right, wipe data / cache FIRST in recovery, THEN apply custom ROM
superone Click is not really needed before, but it doesn´t matter ...
you could update baseband first : http://android.modaco.com/content/l...lash-stock-baseband-release-1035-21-20110502/
use Baseband 1035.21_20110405 , Baseband 1035.21_20110502 is buggy !
75markus said:
newest CWM is here : http://forum.xda-developers.com/showthread.php?t=1098001
generally, you did everything right, wipe data / cache FIRST in recovery, THEN apply custom ROM
superone Click is not really needed before, but it doesn´t matter ...
you could update baseband first : http://android.modaco.com/content/l...lash-stock-baseband-release-1035-21-20110502/
use Baseband 1035.21_20110405 , Baseband 1035.21_20110502 is buggy !
Click to expand...
Click to collapse
The CWM your refering to is the one i used ? should i try the one useing INTERNAL SD ?
does it matter that before i used the mentioned CWM above i tried to use the CWM ROM MANAGER from Marked, but it did'nt work, then i installede the other CWM ??
I Allready got the baseband 405 installed
can it have something to do with the custom rom change the fileformat to EXT4 ??
I really dont undestand what went wrong ?? I have been flashing rom since HTC HERO, never had problems not even with SGS
had the same problem that it hange at the LG log, i searched for a recovery solution and i found one in this forum and found a soltution to restore the phone with NVFlash
here is the link :http://android.modaco.com/content/l...rom-release-v10b-dated-1300166062-15-03-2011/
all you have to do is download the 2 files from there, take the battery out of your device, connect it to the computer. hold up and down and power and a device will be recognized by your system (the device disp;lay will stay black)
install the downloaded driver (the device should be recognized by your windows)
then run the bat file from the 2nd download and the device should be restored.
after that it will go into boot loop and you have to insert the battery.
then it should start up like a new device. hope that helps
grognaz said:
had the same problem that it hange at the LG log, i searched for a recovery solution and i found one in this forum and found a soltution to restore the phone with NVFlash
here is the link :http://android.modaco.com/content/l...rom-release-v10b-dated-1300166062-15-03-2011/
all you have to do is download the 2 files from there, take the battery out of your device, connect it to the computer. hold up and down and power and a device will be recognized by your system (the device disp;lay will stay black)
install the downloaded driver (the device should be recognized by your windows)
then run the bat file from the 2nd download and the device should be restored.
after that it will go into boot loop and you have to insert the battery.
then it should start up like a new device. hope that helps
Click to expand...
Click to collapse
I got it up running again by restoring my nand backup, and its working.
but what i would like to is installe a custom rom, would that your are saying help me ??
do i have to root it after doing the above ?
dk_iceman said:
The CWM your refering to is the one i used ? should i try the one useing INTERNAL SD ?
does it matter that before i used the mentioned CWM above i tried to use the CWM ROM MANAGER from Marked, but it did'nt work, then i installede the other CWM ??
I Allready got the baseband 405 installed
can it have something to do with the custom rom change the fileformat to EXT4 ??
I really dont undestand what went wrong ?? I have been flashing rom since HTC HERO, never had problems not even with SGS
Click to expand...
Click to collapse
you can try and download / install CWM 3028 with ROM Manger, it also used to work for me ...
perhaps the EXT4 conversion didin´t work, who knows ...
you didn´t do anything wrong yet, so keep trying
Just one question, did you wipe the dalvik cache ?
Mike_52 said:
Just one question, did you wipe the dalvik cache ?
Click to expand...
Click to collapse
yes i tried again now... and wiped dalvik cache in advanced. still the same stops on the LG LOGO
one question.. when entering CWM by holding VOL DOWN + Power i have read it should say ANDROID ?? but mine Dosen't say ANDROID , it just goes from LG LOGO into CWM
okay now Im starting all over i think...
I just flashed the O2X with NVflash and beging from scratch
make sure your CWM is updated the first CWM version had issues
Anyway you should post such threads in General, it has nothing to do with dev.
Sorry for placing this tread in the wrong place...
I finally got something working..
CyanogenMod 7 is running and BlazingDragon 1,7 works perfekt..
but still no matter what i do i can't get MoDaCo FR17 Fear Edition to work :-(
dk_iceman said:
Sorry for placing this tread in the wrong place...
I finally got something working..
CyanogenMod 7 is running and BlazingDragon 1,7 works perfekt..
but still no matter what i do i can't get MoDaCo FR17 Fear Edition to work :-(
Click to expand...
Click to collapse
you can try orig. FR17 prebake from Modaco, worked fine for me ... http://android.modaco.com/content/l...ptimus-2x-with-online-kitchen-now-with-oc-uv/
FR17 Fear is using my theme, you can apply afterwards if you like
find in my signature BGB Theme
Have you tried downloading the ROM one more time?
Maybe you got a bad download. you could do a MD5 check on the file to be sure.
cagra said:
Have you tried downloading the ROM one more time?
Maybe you got a bad download. you could do a MD5 check on the file to be sure.
Click to expand...
Click to collapse
Tried that also :-S
the only thing i haven't tryed is Checking the MD5, wich program do you use to check it with ?
Never done a MD5 check my self, but there should be plenty of freeware tools that can do it.
I had the same problem on fear edition. After i got stuck @ logo i just wiped dalvik and cache again 2x and then rebooted and started working fine.
Sent from my LG-P990 using XDA App
peacekeeper05 said:
I had the same problem on fear edition. After i got stuck @ logo i just wiped dalvik and cache again 2x and then rebooted and started working fine.
Sent from my LG-P990 using XDA App
Click to expand...
Click to collapse
still not working

SGS I9000 too slow!

Hy everybody,
I have got a big problem with my i9000: it doesn't start up very properly i mean it takes a lot to start the S logo animation, the animation is very slow (really low fps) and it usually stuck at the end of the animation (only once i managed to arrive to the menu where you have to choose the language but the touchscreen was not responding). Even CWM recovery is slow! There is a lag while choosing the options. I also tried to reflash using stock Samsung ROMS such as XXJPU and XXJW7 but i get the same issue. Also tried to install custom ROM via CWM, i get the speed back but touch doesn't work! I have already searched on the site for this issue and got a thread that had exactly the same problem but didn't manged to get out from this situation (here is the thread http://forum.xda-developers.com/showthread.php?t=1422634, it's exactly the same issue!).
I have been flashing and repearing android devices for years and this is the first time i meet this kind of issue! Maybe it is a bootloader problem or motherboard, but i ask you experts before getting in troubles =)
Sorry for my bad english :victory:
Cheers :laugh:
I think it is a hardware problem mate(since you flashed too many roms...)
Rooting wont help you too so...
Even if you dont have warranty give it for repairing..
GT-I9000 cihazımdan Tapatalk 2 ile gönderildi
Uhm i don t have warranty anymore but i'm able to disassembly and replace any piece i need. Hope it is not a motherboard prolem, but i can t image something different...
NotoriuStyle™ said:
Uhm i don t have warranty anymore but i'm able to disassembly and replace any piece i need. Hope it is not a motherboard prolem, but i can t image something different...
Click to expand...
Click to collapse
First pull out everything, Ext SD card, Sim Card, power up after a few min of pressing power button..get into CWM recovery and format SD card, everything and wipe... flash a rescue kit from My Android Collection, link below
If you cannot format Internal SD card in recovery use a Format tool from My Android collections link below to format it from PC
xsenman said:
First pull out everything, Ext SD card, Sim Card, power up after a few min of pressing power button..get into CWM recovery and format SD card, everything and wipe... flash a rescue kit from My Android Collection, link below
If you cannot format Internal SD card in recovery use a Format tool from My Android collections link below to format it from PC
Click to expand...
Click to collapse
When you say format everything do you mean format /boot too ? Thank u for your help =]
NotoriuStyle™ said:
When you say format everything do you mean format /boot too ? Thank u for your help =]
Click to expand...
Click to collapse
can be done, but If you don't have boot loader on the ROM , you will have problem, so avoid it , for now
xsenman said:
First pull out everything, Ext SD card, Sim Card, power up after a few min of pressing power button..get into CWM recovery and format SD card, everything and wipe... flash a rescue kit from My Android Collection, link below
If you cannot format Internal SD card in recovery use a Format tool from My Android collections link below to format it from PC
Click to expand...
Click to collapse
I did everything and than flashed "i9000 Rescue Darky's ROM Resurrection edition" but with no result, even the robotic voice of Darky's ROM is laggy!! Trying other rescue kit and will let you know
NotoriuStyle™ said:
I did everything and than flashed "i9000 Rescue Darky's ROM Resurrection edition" but with no result, even the robotic voice of Darky's ROM is laggy!! Trying other rescue kit and will let you know
Click to expand...
Click to collapse
remember to do full wipes /factory reset before and after flashing the ROM and Internal SD card must be formatted
xsenman said:
remember to do full wipes /factory reset before and after flashing the ROM and Internal SD card must be formatted
Click to expand...
Click to collapse
Yes i always wipe data, wipe cache, wipe dalvik and wipe battery stats. Tried even GB Flash Kit and Rescue Kit for i9000 using heimdall packed but nothing. Boot animation is always slow and after 1 hour, after getting loaded, touch doesn't work =(
Nothing ... tried everything excpet formatting /boot. Will i risk to brick my device if i choose that option ?
NotoriuStyle™ said:
Nothing ... tried everything excpet formatting /boot. Will i risk to brick my device if i choose that option ?
Click to expand...
Click to collapse
Nope, but you must not try to reboot after formatting it, . You need to power down, do a battery pull and flash a ROM package with boot loader for phone to function
xsenman said:
Nope, but you must not try to reboot after formatting it, . You need to power down, do a battery pull and flash a ROM package with boot loader for phone to function
Click to expand...
Click to collapse
I've done 3 wipes then the 5 formats (boot too) then while still in recovery flash Elite's JB RC 12.1 rom .. if problems then it's deff a hardware issue
Sent from my GT-I9300 using xda premium
jj92942000 said:
I've done 3 wipes then the 5 formats (boot too) then while still in recovery flash Elite's JB RC 12.1 rom .. if problems then it's deff a hardware issue
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Nothing =( every rom i flash via CWM gives speed back but touch doesn't work =S
NotoriuStyle™ said:
Nothing =( every rom i flash via CWM gives speed back but touch doesn't work =S
Click to expand...
Click to collapse
Then it's hardware .. any gb rom gives you touch?
Sent from my GT-I9300 using xda premium
jj92942000 said:
Then it's hardware .. any gb rom gives you touch?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Uhm every rom i tried via CWM, and even the stock rom when it gets loaded, doesn't give me a working touchscreen. This problem happened last month too and after flashing a lot of roms i managed to solve it in the end, but i was just lucky because i didn't know what the device had and i solved just flashing random ROMS and getting solved with XXJW7. That's why i'm not so sure it is a hardware problem =(
NotoriuStyle™ said:
Uhm every rom i tried via CWM, and even the stock rom when it gets loaded, doesn't give me a working touchscreen. This problem happened last month too and after flashing a lot of roms i managed to solve it in the end, but i was just lucky because i didn't know what the device had and i solved just flashing random ROMS and getting solved with XXJW7. That's why i'm not so sure it is a hardware problem =(
Click to expand...
Click to collapse
Try Elite JB RC12.1, if working on jw7, do a android backup, then you'll have to flash JVU 1st, if touch screen works then it'll work with the JB rom, here's a trick, instructions are there but do this. Backup everything to pc, take out sdcard, before flash jvu, do 3 wipes, data, cache, dalvik, then go to usb mount, format 5 items there, boot, data, cache, system, sdcard ( last wipes everything). Now do 3 wipes again, yes again, flash JVU, root, transfer Rom to sdcard, 3 wipes, do usb mount, then 4 formats (not sdcard), 3 wipes again, flash JB rom. If bootloop, no bigger it just flashed kernel, take battery out, wait back in recovery flash Rom. You'll be on JB.
Sent from my GT-I9300 using xda premium
dreamer94 said:
I think it is a hardware problem mate(since you flashed too many roms...)
Rooting wont help you too so...
Even if you dont have warranty give it for repairing..
GT-I9000 cihazımdan Tapatalk 2 ile gönderildi
Click to expand...
Click to collapse
Flashing your phone multiple times, does not make it slow. I have flash my phone almost every day, to check out new roms that are released every day and my phone hasn't slowed down a bit
---------- Post added at 04:16 PM ---------- Previous post was at 04:10 PM ----------
NotoriuStyle™ said:
Hy everybody,
I have got a big problem with my i9000: it doesn't start up very properly i mean it takes a lot to start the S logo animation, the animation is very slow (really low fps) and it usually stuck at the end of the animation (only once i managed to arrive to the menu where you have to choose the language but the touchscreen was not responding). Even CWM recovery is slow! There is a lag while choosing the options. I also tried to reflash using stock Samsung ROMS such as XXJPU and XXJW7 but i get the same issue. Also tried to install custom ROM via CWM, i get the speed back but touch doesn't work! I have already searched on the site for this issue and got a thread that had exactly the same problem but didn't manged to get out from this situation (here is the thread http://forum.xda-developers.com/showthread.php?t=1422634, it's exactly the same issue!).
I have been flashing and repearing android devices for years and this is the first time i meet this kind of issue! Maybe it is a bootloader problem or motherboard, but i ask you experts before getting in troubles =)
Sorry for my bad english :victory:
Cheers :laugh:
Click to expand...
Click to collapse
Why dont you try flashing your original firmware via Odin with "repartition" ticked. Once that is done, let your phone boot and see if there's and lag. If lag still persists, go to CMW, format system, boot and data and restart your phone and then check again
Touchscreen problem
NotoriuStyle™ said:
Hy everybody,
I have got a big problem with my i9000: it doesn't start up very properly i mean it takes a lot to start the S logo animation, the animation is very slow (really low fps) and it usually stuck at the end of the animation (only once i managed to arrive to the menu where you have to choose the language but the touchscreen was not responding). Even CWM recovery is slow! There is a lag while choosing the options. I also tried to reflash using stock Samsung ROMS such as XXJPU and XXJW7 but i get the same issue. Also tried to install custom ROM via CWM, i get the speed back but touch doesn't work! I have already searched on the site for this issue and got a thread that had exactly the same problem but didn't manged to get out from this situation (here is the thread http://forum.xda-developers.com/showthread.php?t=1422634, it's exactly the same issue!).
I have been flashing and repearing android devices for years and this is the first time i meet this kind of issue! Maybe it is a bootloader problem or motherboard, but i ask you experts before getting in troubles =)
Sorry for my bad english :victory:
Cheers :laugh:
Click to expand...
Click to collapse
Hey!! I tried various ROM combinations and it worked for a few months. Although even after a few days, the problem would reappear and I was forced to flash again(it started working after flashing about 30-50 ROMs). Finally, a month back, I came across the same problem again but this time, nothing worked. After hitting my head on the wall for a month, I finally gave it to the Samsung ppl and they figured that the problem was with the touchscreen!!(zoinks!!) They will replace the touchscreen and it would cost me $145(8,000INR , expired warranty). They'll return it in 4 days. I'll post more when I get my SGS back.
Hmm, looks to me, you must have flashed something wrong/flashing process goes wrong. I would suggest this 'solution':
1. Flash a new recovery system. I suggest the latest TWRP recovery or flash the latest CWM. To me, CWM has given me lots of problems. You can flash it through computer or through CWM using their flashable zip.
2. Once then, wipe everything! Data, cache, dalvik cache.
3. Next, format the system! If you formatted system, you will lose your current rom. Meaning the phone will not boot up until you install/flash a ROM.
4.Install necessary stuff like Google Apps
Done! Things should be working right now. I had problems like you, my phone sometimes takes 2-5 minutes to boot.
I'm using the Samsung Galaxy S Plus I9001. So, I flashed Acro86's ICS rom. Super smooth.
Hope I helped you!
Sent from my GT-I9001 using xda app-developers app
Hi, I have exactly the same problems.
I guess it's also touch error, I already changed it once and after the year and then started having problems as it was pressed alone, stuck all the time and stopped working. As I was reading and testing, I think I'll buy again the touch.
From Argentina.
Regards.

[Q] Bootloop + Recovery wont boot

So yeah i bricked my phone, its stuck in a damn bootloop and i cannot enter recovery no matter which one i install.
I even flashed stock rom via odin and tried both flashing twrp and cwm, none worked, whichever rom is installed i still get in a damn bootloop and i cannot boot into recovery (blank screen).
Is there anything i can do for my phone?
Thank you all in advance
Try to flash Dorimanx Kernel using Odin (v9.34 for JB Roms, v8. for Stock Roms)
I will upload a guide tomorrow for people facing problems with their recovery. I will edit this when its finished.
EDIT: Here it is: http://forum.xda-developers.com/showthread.php?t=2441940
Sent from my GT-I9100 using xda app-developers app
Hit Thanks please
OverkillSRB said:
So yeah i bricked my phone, its stuck in a damn bootloop and i cannot enter recovery no matter which one i install.
I even flashed stock rom via odin and tried both flashing twrp and cwm, none worked, whichever rom is installed i still get in a damn bootloop and i cannot boot into recovery (blank screen).
Is there anything i can do for my phone?
Thank you all in advance
Click to expand...
Click to collapse
can you tell me what did you do to caused that ? or do you have download mode ?
anyway it seems to me a hard break . probably you messed your boot . you got two options:
1.use "RescuePDA" (you can find the thread and every thing in galaxy mini II development)
2.take it to a service center
dlb4all said:
can you tell me what did you do to caused that ? or do you have download mode ?
anyway it seems to me a hard break . probably you messed your boot . you got two options:
1.use "RescuePDA" (you can find the thread and every thing in galaxy mini II development)
2.take it to a service center
Click to expand...
Click to collapse
Download mode is the only thing that works, as i said recovery wont boot and any rom i install is getting into a bootloop. ((
I used triangle away, the problems started after that. I had cwm and cm 10.1 08/18
Is there any way to factory reset using odin?
I have the same exact problem.
I follow the discussion with interest.
zeruel857 said:
I have the same exact problem.
I follow the discussion with interest.
Click to expand...
Click to collapse
Zeruel, i seem to have somehow fixed the problem, however not entirely.
I downloaded some random recovery rom, flashed it with odin and wiped everything (cache, factory reset, dalvik cache), and reinstalled cm 10.1.
Then i flashed back the thewhisp's recovery and booted into cm with no problem.
However now i cannot boot into recovery using volume+- and home and power button, i have to boot to it from the cm.
That i dont know how to solve, but at least my phone works fine
Thank you, but I think to have solved the problem with RescuePDA.
A big thanks go to dlb4all, thank you a lot mate.
zeruel857 said:
Thank you, but I think to have solved the problem with RescuePDA.
A big thanks go to dlb4all, thank you a lot mate.
Click to expand...
Click to collapse
no problem man . my pleasure :good:

[Q] S5830 cant instal rom's status 7

Hello guys,
Having a real problem....
Status 7 error. I tried everything....
Latest CWM (v6)
Every latest rom's: 10.1.4 /.1 /.6
Tryed to erase first lines of binary-script (until "mount") and nothing (it doesnt even install, with the above it would instal until give the status 7).
For what i see i donne every solution available but nothing so far. Any tips?
(srry if im doing anything wrong with the threat. i think im in the right place.)
kirloi said:
Hello guys,
Having a real problem....
Status 7 error. I tried everything....
Latest CWM (v6)
Every latest rom's: 10.1.4 /.1 /.6
Tryed to erase first lines of binary-script (until "mount") and nothing (it doesnt even install, with the above it would instal until give the status 7).
For what i see i donne every solution available but nothing so far. Any tips?
(srry if im doing anything wrong with the threat. i think im in the right place.)
Click to expand...
Click to collapse
As far I know CWM 6 isn't really stable on our ace. Better use CWM 5.
Sent from my GT-S5830 using xda app-developers app
Blackbox421 said:
As far I know CWM 6 isn't really stable on our ace. Better use CWM 5.
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
I used CWM 5 before... same results... that's why i put the 6... :s
kirloi said:
I used CWM 5 before... same results... that's why i put the 6... :s
Click to expand...
Click to collapse
try px recovery it helps sometimes in such situations
earlier fly on mod showed me this error and i flashed it successfully through px so give it a shot
:good::good:good luck buddy:good::good:
Backup your sdcard's data to your PC using a USB adapter then FORMAT it in FAT32 format finally DOWNLOAD again the rom.
I think your sdcard might be corrupted or the rom file you downloaded might not be downloaded correctly so the file is corrupted too.
Try it and report
Viper The Ripper said:
Backup your sdcard's data to your PC using a USB adapter then FORMAT it in FAT32 format finally DOWNLOAD again the rom.
I think your sdcard might be corrupted or the rom file you downloaded might not be downloaded correctly so the file is corrupted too.
Try it and report
Click to expand...
Click to collapse
Well i as coming here to say that i even tryed download mode, another round of diferent roms. And i tryed with the card of a friend of mine but still i get abort error or status 7.
I didnt try to format the cards though... I'll try in the coming days that have another go and do what you're saying.
(as of now i spend 6hours trying to fix my ace... i guess i'm almost giving up... and going to buy a new phone... what is a stupid thing but the phone isnt helping... and i tryed everything from the book )
Thanks. I'll report soon.
After doing the 3 usual wipes in CWM recovery
Go to Mount and storage and see if there is anything mounted like cache or sd-ext (if yes, unmount it then try flashing the ROM)
If that doesn't work try a different ROM.
Additionally, reflash CWM5 and restore your old Nandroid Backup
Report back.
Good luck...
Ashish Goyal said:
After doing the 3 usual wipes in CWM recovery
Go to Mount and storage and see if there is anything mounted like cache or sd-ext (if yes, unmount it then try flashing the ROM)
If that doesn't work try a different ROM.
Additionally, reflash CWM5 and restore your old Nandroid Backup
Report back.
Good luck...
Click to expand...
Click to collapse
So i just got back from another attempt at the restoration of my phone. Correction a friend of mine tryed to do. So he manage to put the orignial rom unrooted on the phone. But i really dont know if its working because the phone didnt leave the brick mode... :s like "what?"
So in short. The phone is unrooted and with fabric settings but is still in brick mode. But now it shows the samsung logo!!!!
kirloi said:
So i just got back from another attempt at the restoration of my phone. Correction a friend of mine tryed to do. So he manage to put the orignial rom unrooted on the phone. But i really dont know if its working because the phone didnt leave the brick mode... :s like "what?"
So in short. The phone is unrooted and with fabric settings but is still in brick mode. But now it shows the samsung logo!!!!
Click to expand...
Click to collapse
Can you boot into stock recovery mode?
Do data/factory reset and wipe cache partition then reboot your phone
reflash cwm 5
kirloi said:
Hello guys,
Having a real problem....
Status 7 error. I tried everything....
Latest CWM (v6)
Every latest rom's: 10.1.4 /.1 /.6
Tryed to erase first lines of binary-script (until "mount") and nothing (it doesnt even install, with the above it would instal until give the status 7).
For what i see i donne every solution available but nothing so far. Any tips?
(srry if im doing anything wrong with the threat. i think im in the right place.)
Click to expand...
Click to collapse
flash cwm5
Viper The Ripper said:
Can you boot into stock recovery mode?
Do data/factory reset and wipe cache partition then reboot your phone
Click to expand...
Click to collapse
I've donne that already... no use...
I'm gonna try to root the phone again and put the Cmod again.
*ill report after.

[Q] P7320 trouble

Hi
I have a p7320 which I am trying to install a custom ROM to, and I am having some trouble.
I used this guide: http://forum.xda-developers.com/showthread.php?t=1569122
1: flashed cwd through odin
2: flashed superuser through cwm
All fine until now
3: then I flashed the kernel from the same site through cwm
4: bootloop
I didnt take backup, so I couldnt nandroid back
I couldnt turn the device on, so I couldnt transfer another kernel
There were no "mount USB" in cwm so I couldnt transfer the files there either.
I was able to go into download mode, and I flashed the only stock rom I could find in .tar (flashable through odin)
from here: http://androidromupdate.com/2012/12/12/u-s-att-samsung-galaxy-tab-8-9-lte-sgh-i957-android-4-0-4-ice-cream-sandwich-update-finally-arrives/
flashing went fine and the tab booted.
Now I went back and flashed cwm again through odin, but when I was going to place superuser and the new rom on the sdcard.... there is no room on the tab.
In explorer it says : 0 byte available out of 26.9MB
This tab is 16GB.... what happened?
I cant transfer files to it, so the only thing I can flash is the .tar files through odin.
please help
panelovn said:
In explorer it says : 0 byte available out of 26.9MB
This tab is 16GB.... what happened?
I cant transfer files to it, so the only thing I can flash is the .tar files through odin.
please help
Click to expand...
Click to collapse
Hmmm, this is usually a sdcard mount thing
so maybe all you have to do is reboot to CWM do a format /sdcard from mount and unmount section in CWM
then reboot to system and see if the problem still there
omarainea said:
Hmmm, this is usually a sdcard mount thing
so maybe all you have to do is reboot to CWM do a format /sdcard from mount and unmount section in CWM
then reboot to system and see if the problem still there
Click to expand...
Click to collapse
Hi
There is no such thing as format/sdcard in that section.
Only format/cache, format/data and format/system
panelovn said:
Hi
There is no such thing as format/sdcard in that section.
Only format/cache, format/data and format/system
Click to expand...
Click to collapse
this probably means that your CWM version is old [5.5.0.4 I guess]
I don't know if your tab has a newer CWM cuz my tab is p7300,
so try to find a newer one or even try TWRP instead, cuz it also has sdcard format function
one little thing, you said your tab is P7320 and yet you have installed a SGH-I957 ROM {read it from your link}
I honestly don't know the deference between the two devices
what I'm trying to say is: maybe the problem is because you're using a ROM for a different device
so maybe you should try THIS [the latest ICS Odin tar samsung framework for P7320]
I have a p7320 and I am using this ROM.
http://forum.xda-developers.com/showthread.php?t=2554877
Fast, no bloatware, no freezing.
I followed the instructions no problems. My recovery UI has an option partition SD card under advanced. Dont know if that will help you.
Sent from my GT-P7320 using XDA Premium HD app
Hi
I was able to download another .tar full stock rom which I flashed with odin.
Worked out fine, and the memory of the SD card is back.
However... I once again flashed cwm and superuser, then i tried the rom you are linking to but the tab wont boot with it
Its just stuck with a black screen after the logo.
Now I have reflashed the stock rom with working sd card
Sorry about that. I remember I had a black screen for a few minutes but eventually it booted. The developer also pointed out boot animations are missing
Sent from my GT-N7100 using XDA Premium HD app
panelovn said:
Hi
I was able to download another .tar full stock rom which I flashed with odin.
Worked out fine, and the memory of the SD card is back.
However... I once again flashed cwm and superuser, then i tried the rom you are linking to but the tab wont boot with it
Its just stuck with a black screen after the logo.
Now I have reflashed the stock rom with working sd card
Click to expand...
Click to collapse
Hi,
I'm the developer working on the CM10 ROM for the P7320 - yes, the first boot might take a while, and it doesn't show a boot animation, so it might look like it's crashed. But I have tested going from the stock ICS image to my ROM a few times and it seems to work fine, eventually. Perhaps you could give it another go and see?
Cheers.
CL0SeY said:
Hi,
I'm the developer working on the CM10 ROM for the P7320 - yes, the first boot might take a while, and it doesn't show a boot animation, so it might look like it's crashed. But I have tested going from the stock ICS image to my ROM a few times and it seems to work fine, eventually. Perhaps you could give it another go and see?
Cheers.
Click to expand...
Click to collapse
Hi
I will definetely give it another go this evening
Can i flash superuser, your rom and gapps in one go? Or do I have to boot it in between?
thank you for your answer
The ROM should have super user already, so you shouldn't need that. You can do the ROM and gapps together.
I tried again, and this time it worked like a charm!
Thank you!
panelovn said:
I tried again, and this time it worked like a charm!
Thank you!
Click to expand...
Click to collapse
What am I doing wrong. My device starts to cyanogenmod boot animation but not further.
Do I have to do the dalvik wipe and cache wipe?
I think i have tried everything. It's been rolling boot animation about 30 minutes now.
Sorry about my bad language.
And thank you for your answers.
I dont have a solution. Is this the first time you use this ROM? One time I wanted to revert to stock to check something and I got an everlasting Samsung animation until I did a factory reset from recovery. Did you try factory reset?
Sent from my GT-P7320 using XDA Premium HD app
hondax said:
I dont have a solution. Is this the first time you use this ROM? One time I wanted to revert to stock to check something and I got an everlasting Samsung animation until I did a factory reset from recovery. Did you try factory reset?
Sent from my GT-P7320 using XDA Premium HD app
Click to expand...
Click to collapse
Hi,
Now i tried with factory reset and it worked fine this time. And it was the first time.
Thank you

Categories

Resources