Related
I received this bike g purchased from amazon with lollipop but not passed from the boot image.
I've flashed several firmwares but nothing to start, until I installed cm12 and stays at black screen
some solution'm desperate :crying::crying::crying:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Do you know what the exact model is? Is it xt1063? 1064?
Perhaps you are flashing the wrong image.
In HTCMania say as restore
Reinstall the factory firmware, on page HTCMania indicate how to do it
bluehacker007 said:
Do you know what the exact model is? Is it xt1063? 1064?
Perhaps you are flashing the wrong image.
Click to expand...
Click to collapse
xt1063
[
Campero said:
In HTCMania say as restore
Click to expand...
Click to collapse
campero_electronica said:
Reinstall the factory firmware, on page HTCMania indicate how to do it
Click to expand...
Click to collapse
Amigo pasarme el link
saludos
Bajate este firmware 5.0.2 Lollipop primero, es europeo, pero le queda al Moto G XT1063...
http://www.4shared.com/zip/UtS8KSq5ce/RETUGLB_XT1063_502_LXB2246-28_.html
Lo flasheas:
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
Dejas que inicie y todo pero no tendras señal, te bajas esto:
https://www.dropbox.com/s/xy58fv4y7r3zdcs/Modem moto g 2014.rar?dl=0
De ahi, sacas el archivo NON-HLOS.bin y lo flasheas con fastboot:
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
y es todo, deberas tener señal y con Lollipop.
Saludos, y no le instales ningun firmware KitKat o brickearas el celular.
joel_sinbad said:
Bajate este firmware 5.0.2 Lollipop primero, es europeo, pero le queda al Moto G XT1063...
http://www.4shared.com/zip/UtS8KSq5ce/RETUGLB_XT1063_502_LXB2246-28_.html
Lo flasheas:
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
Dejas que inicie y todo pero no tendras señal, te bajas esto:
https://www.dropbox.com/s/xy58fv4y7r3zdcs/Modem moto g 2014.rar?dl=0
De ahi, sacas el archivo NON-HLOS.bin y lo flasheas con fastboot:
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
y es todo, deberas tener señal y con Lollipop.
Saludos, y no le instales ningun firmware KitKat o brickearas el celular.
Click to expand...
Click to collapse
Amigo ya ese lo instale y nada sigue en lo mismo anoche le volvi a poner cm12 y queda así
Y cuando instalo el firmware ese pasan mas de 20 minutos en ese logo y no pasa nada
Estará brickeado o tendrá un partición dañada
Guys keep it in English,
Do you have boot logo?
Just black screen?
good friend @fburgos
with cm12 stays at black screen
with lollipop 5.0.2 stays in motoroola logo alli fails
Check the partitions permissions, very strange problem seems a softbrick
Try to do a RMA in amazon
Right now this connected to my laptop and watch
appears
and the phone has more than 40 minutes in the boot image Paid
Julio_MotoMod said:
I received this bike g purchased from amazon with lollipop but not passed from the boot image.
I've flashed several firmwares but nothing to start, until I installed cm12 and stays at black screen
some solution'm desperate :crying::crying::crying:
View attachment 3239014
Click to expand...
Click to collapse
http://forum.xda-developers.com/mot...dows-tool-moto-g-2014-xt1064-restore-t2957167
Prueba esto, a mí me funcionó aún cuando había actualizado el bootloader para poder usar Lollipop. Si te funciona perderás la señal, en el hilo de cómo actualizar tu bootloader, en el FAQ hay un link a MEGA con los archivos necesarios para poder recuperar la señal. Yo mismo conseguí esos archivos así que puedes estar seguro que funcionarán.
Espero te funcione. Suerte.
--------------
Try this, it worked for me even after I updated the bootloader in order to use Lollipop. If it works for you, you'll lose your phone signal, on the thread on how to update your bootloader, on the FAQ, there's a link to MEGA with the necessary files to restore the signal. I myself retrieved those files so you can be sure they'll work.
Hope it works for you. Good luck.
Shampoos said:
http://forum.xda-developers.com/mot...dows-tool-moto-g-2014-xt1064-restore-t2957167
Prueba esto, a mí me funcionó aún cuando había actualizado el bootloader para poder usar Lollipop. Si te funciona perderás la señal, en el hilo de cómo actualizar tu bootloader, en el FAQ hay un link a MEGA con los archivos necesarios para poder recuperar la señal. Yo mismo conseguí esos archivos así que puedes estar seguro que funcionarán.
Espero te funcione. Suerte.
--------------
Try this, it worked for me even after I updated the bootloader in order to use Lollipop. If it works for you, you'll lose your phone signal, on the thread on how to update your bootloader, on the FAQ, there's a link to MEGA with the necessary files to restore the signal. I myself retrieved those files so you can be sure they'll work.
Hope it works for you. Good luck.
Click to expand...
Click to collapse
te cuento yo use ese firmware que esta en ese enlace que me pásate y el teléfono no hacia nada
osea quedaba peor el bootloader que tiene ahorita es el 48.82 pero metiendo le firmware kitkat 4.4.4
se pone peor porque se pega en la imagen del boot
I tell you I use the firmware that is on that link to head over me and the phone did nothing
bone was worse bootloader having right now is the 48.82 but getting him kitkat firmware 4.4.4
it gets worse because it sticks in the boot image
without solving the problem the phone gets stuck in bootloop
any solution
[mega.co.nz/#F!29RX1L6I!gfxcXgqkAhf5GDhr_aPGYg]
[mega.co.nz/#!nlh3ibCL!s3ObZDg4oUTPVi_FYeENJtB5mmkmFHaZt9fLNvNU3Rc]
The first link is the shared folder motorola g
the second link is the program for flash
Password: Alkalinorap (Program)
---------- Post added at 01:55 AM ---------- Previous post was at 01:34 AM ----------
Tests that are linked to are the official firmware
I mean at first.
I'm tired of flash always works for me
Para la guia en español, ve al final del post y haz click en el spoiler para verla.
THIS IS NOT FOR DROID TURBO I REPEAT DONT DO THIS FOR DROID TURBO
Hello guys, given the unlocked bootloader nature of our moto maxx's and moto turbos
and that some of us like to try and test firmware from different countries, i present you:
How to Flash Different Official Firmware on Moto Maxx/Turbo
Lets say you have the mexico, puerto rico or brasil firmware and want to try India Firmware
you have to get this on your PC:
Requisites:
RSD LITE
Android Studio or Minimal ADB and Fasboot (i personally recommend Minimal Adb and Fastboot because thats all we gonna need and its lighter than Android Studio 2 Mb vs 800Mb)
Official Firmware you want to flash
mFastboot (motorola Fastboot) i uploaded it for you: https://mega.co.nz/#!MVtz1DLb!CZTh_-wCl-qyta4Q0yZuPk_TB6Wq7Z4zElk6eArXrXk
RSD LITE only Works if you are going back to your Original Firmware
Installation:
1.- Install MAaF
Install Minimal ADB and Fastboot
2.- Install mFastboot
Copy the contents of mfastboot.zip and put them on Minimal ADB and Fastboot Folder (C:\Program Files (x86)\Minimal ADB and Fastboot)
Now you have working Fastboot AND mFastboot
3.- Copy Firmware
Copy the contents of your desired firmware to Minimal ADB and Fastboot Folder like this:
Now you are ready to flash!
First turn off your device and Put it on fastboot mode (Power and volume down for 2 seconds with your phone off)
4.- Get Detected
type
Code:
fastboot devices
on minimal adb to see if your pc detects your phone on fastboot mode
if you get some numbers and letters like the picture you are ready to go.
if not, you are missing drivers, looks for Motorola Device Manager
5.- Install
Copy and Paste these commands on Minimal ADB and Fastboot:
mfastboot flash motoboot bootloader.img
mfastboot flash radio radio.img
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash system system.img_sparsechunk.8
mfastboot erase cache
mfastboot erase userdata
mfastboot oem fb_mode_clear
mfastboot reboot
Click to expand...
Click to collapse
and thats all, as easy as copy from here and paste on cmd.
when your phone finishes flashing just press enter to execute mfastboot reboot and you will boot the new firmware.
Tip:
you can remove/skip the line
Code:
mfastboot flash recovery recovery.img
if you want to keep your custom recovery like TWRP of CyanogenRecovery
remember:
Flashing another firmware will erase all your information
i know that you can flash without erasing anything but that causes many many errors and inestability i've seen it a lot of times so i encourage to erase everything every time you flash a different firmware, better start fresh.
FAQ
i have a Moto Maxx/Turbo and i want to flash Verizon (or another Firmware) will it work???
Flashing different quark phones firmware will work and boot, however getting signal its another history, all moto maxx are unlocked and there is no problem with them but if you flash droid turbo firmware on moto maxx you likely wont get any signal, see my thread for [Guide] Droid Turbo & Moto Maxx Carrier and Bootloader Compatibility
Why i can't just flash it using RSD LITE?
Because somehow it detects the firmware you are on, so you can only flash your original firmware
Why did you not include gpt.bin in the flashing???
Because if you were on kitkat, installed brasil or another firmware and take a OTA to lollipop your gpt.bin version will be greater than the one you'll try to flash and it will FAIL TO FLASH, dont worry just skip that line.
Why If i flashed India/Mexico/Brasil Firmware it says the name of my original Firmware???? did it failed??
Motorola Somehow stores in a partition your original firmware name, even if you flash another from another country it will say the name of the original firmware you had, dont worry it doesnt affect anything.
Can i go back to kitkat if i flashed the Mexico or Brasil Lollipop OTA???
Yes you can flash back to kitkat without risk of brick if you flashed the mexican or brasil OTA using the method of this thread.
Where i can get my official firmware???
you can get it in another thread i have: [All Quark][Official] Stock Firmware Moto Maxx Droid Turbo Moto Turbo
Im in mexico or brasil Lollipop how can i get root?
Just boot or flash TWRP and flash Super SU for android 5.0 by chainfire.
Protip: (my view on flashing soak test on locked devices)
DONT YOU EVER EVER EVER FLASH A SOAK TEST IF YOU HAVE LOCKED BOOTLOADER OR DONT WANT TO UNLOCK, GPT.BIN AND SOME OTHER BOOTLOADER FILES WILL BE UPDATED AND WILL FAIL IF YOU TRY TO FLASH BACK TO OLDER VERSIONS YOU'LL HAVE TO WAIT FOR THE FIRMWARE TO GET OFFICIALLY RELEASED AS A FULL (NOT OTA) AND EVEN THAT ITS NOT A GUARANTEE THAT YOU'LL HAVE YOUR PHONE BACK WORKING, BE CAREFUL WHAT YOU DO TO YOUR PHONE, UNLOCKED BOOTLOADER ITS BEST TO TRY FIRMWARE.
this is a Q&A thread, so if you have any questions just post them here!
i took my time to upload and write this guide for you, so...
If this was useful Press Thanks and if you have $1.00 spare on paypal, i can always take it
Click Donate to me below my name
Guia En español, como instalar diferente FIrmware en tu Moto Maxx o Moto Turbo
NO HAGAS ESTO SI TIENES UN DROID TURBO REPITO NO HAGAS ESTO SI TIENES UN DROID TURBO
Hola amigos, teniendo en cuenta que nuestro telefono se puede desbloquear el bootloader
y que a algunos de nosotros nos gusta tener y probar firmware de otros paises les presento:
Como Instalar Otros Firmwares Oficiales en Moto Maxx/Turbo
Digamos que tienes tu moto maxx Mexico, puerto rico o brasil y quisieras probar el firmware de India
Tienes que tener esto en tu PC:
Requisitos:
RSD LITE
Android Studio or Minimal ADB and Fasboot (yo recomiendo Minimal Adb and Fastboot porque es todo lo que vamos a necesitar y es mas pesado que Android Studio 2 Mb vs 800Mb)
El Firmware Oficial que quieres Instalar (se le dice flashear)
mFastboot (motorola Fastboot) Lo subi para que lo descarguen de aqui: https://mega.co.nz/#!MVtz1DLb!CZTh_-wCl-qyta4Q0yZuPk_TB6Wq7Z4zElk6eArXrXk
RSD LITE Nada mas sirve para volver a tu firmware original, no para instalar otros, OJO
Instalacion:
1.- Instala MAaF
Instala Minimal ADB and Fastboot
2.- Install mFastboot
Copia los contenidos de mfastboot.zip y ponlos en la carpeta de Minimal ADB and Fastboot Folder (C:\Program Files (x86)\Minimal ADB and Fastboot)
Es todo lo que se necesita, ya tienes fastboot y mFastboot
3.- Copiar el Firmware
Copia el contenido del firmware que quieres instalar en la carpeta de Minimal ADB and Fastboot así:
Ya estas listo para Flashear!
Primero apaga tu telefono y ponlo en modo fastboot (presiona boton de encendido y volumen para abajo 2 segundos con el telefono apagado)
4.- Que se Detecte el Telefono
Escribe
Code:
fastboot devices
en minimal adb para ver si tu PC detecta el telefono en modo fastboot
si te salen algunos numeros y letras como la foto ya estas listo para flashear.
si no te salen, te faltan drivers, instala el Motorola Device Manager
5.- Instalar
Copia y pega estos comandos en Minimal ADB and Fastboot:
mfastboot flash partition gpt.bin
mfastboot flash motoboot bootloader.img
mfastboot flash radio radio.img
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash system system.img_sparsechunk.8
mfastboot erase cache
mfastboot erase userdata
mfastboot oem fb_mode_clear
mfastboot reboot
Click to expand...
Click to collapse
y eso es todo, copia de aqui y pega en la consola de comandos
cuando tu telefono termine de flashear solo presiona enter para ejecutar mfastboot reboot y se reiniciara con el nuevo firmware.
Tip:
puedes quitar la linea
Code:
mfastboot flash recovery recovery.img
si te quieres quedar con TWRP Recovery o la que tengas.
Recuerda:
Flashear otra información va a borrar toda tu información
se que se puede flashear sin borrar nada pero eso causa muchos errores e inestabilidad, lo he visto muchas veces, asi que yo recomiendo borrar todo cada vez que flasheas un firmware diferente, siempre es mejor empezar limpio
PREGUNTAS FRECUENTES
si tengo un moto maxx o moto turbo y quiero flashear el firmware de Verizon (o cualquier otro) funcionara?
Mira flashear diferentes firmwares de los moto maxx funcionaran y encenderan, pero tener señal es otra historia, todos los moto maxx estan desbloqueados y no hay problemas en poner otro firmware de otro pais de otro moto maxx pero si instalas el firmware del droid turbo en el moto maxx es probable que no tengas señal, para ver un cuadro de compatibilidad mira mi tema: [Guia] Droid Turbo & Moto Maxx compatibilidad de señal y desbloqueo de firmware
Porque no puedo flashear directo usando RSD LITE?
Porque de alguna forma RSD LITE detecta el firmware que estas o estabas, asi que solo puedes flashear tu firmware original usando rsd lite.
Por que no incluiste la parte gpt.bin en el flasheo???
Porque si estas en kitkat e instalaste brasil u otro firmware y tomaste la OTA para lollipop tu version de gpt.bin es mas nueva que la que intentas flashear y si incluyes esa version, fallara de flashear y te fallara tu telefono., no te preocupes solo borra esa linea.
Si Flashie el firmware de India/Mexico/Brasil sigue diciendo el nombre de mi Firmware original???? fallo??
Motorola de alguna forma guarda en una particion el nombre de tu firmware original, incluso si flasheas otra de otro pais, seguira diciendo el nombre del firmware original que tenias, no te preocupes, no afecta en nada.
Me puedo regresar a kitkat si flashie la OTA de Mexico o Brasil???
Si, puedes usar el método de este tema si te puedes regresar a kitkat sin el riesgo de brickeo si flasheaste la ota de mexico o brasil
Donde puedo sacar el firmware original de mi telefono???
Lo puedes obtener en este tema que tengo: [All Quark][Official] Stock Firmware Moto Maxx Droid Turbo Moto Turbo
Estoy en el firmware de mexico/brasil/india en lollipop, como puedo tener root??
solo inicia el recovery TWRP y descarga e instala Super SU para android 5.0 por chainfire.
tip: (mi punto de vista en flashear un soak test en un telefono con el bootloader bloqueado)
NUNCA NUNCA NUNCA NUNCA FLASHEES UN SOAK TEST SI TIENES EL BOOTLOADER BLOQUEADO O NO QUIERES DESBLOQUEAR EL BOOTLOADER, GPT.BIN Y OTROS ARCHIVOS DEL BOOTLOADER SE ACTUALIZAN Y FALLAN SI TRATAS DE FLASHEAR A VERSIONES MAS VIEJAS, TU TELEFONO SE JODERA Y TENDRAS QUE ESPERAR QUE EL FIRMWARE SALGA OFICIALMENTE COMPLETO (NO OTA) Y AUN ASI NO ES GARANTIA DE QUE TU TELEFONO VUELVA A FUNCIONAR, TEN CUIDADO CON LO QUE LE HACES A TU TELEFONO, ES MEJOR PROBAR FIRMWARE CON EL BOOTLOADER DESBLOQUEADO.
RECUERDA QUE ESTO ES XDA, SI TIENES PREGUNTAS HAZLO EN INGLES EN ESTE TEMA
yo me tome mi tiempo para subir y escribir esta guia para ti, asi que...
Si esto fue util presiona el boton gracias y si tienes $1.00 de sobra en paypal, siempre lo puedo aceptar
haz click en donate debajo de mi nombre.
And where the RDS flash point?
hi
thanks for the great work! congratz!
i have a moto maxx br version. im using cm12 with twrp. i can downgrade to OTA 4.4.4 using this tutorial? and if yes, its safe? i'm asking because i see a lot of post of bricked mmaxx owners. thanks in advance!
fillonov said:
And where the RDS flash point?
Click to expand...
Click to collapse
It's on the official firmware thread
colthars said:
hi
thanks for the great work! congratz!
i have a moto maxx br version. im using cm12 with twrp. i can downgrade to OTA 4.4.4 using this tutorial? and if yes, its safe? i'm asking because i see a lot of post of bricked mmaxx owners. thanks in advance!
Click to expand...
Click to collapse
As long as you have unlocked bootloader and only took the ota for lollipop it's ok
[Q] Not in FAQ - mind puzzler
After cable got unplugged while flashing moforoot. I have tried to put stock ROM back on through boot loader.
I get stuck on your step #4. Says devices not found.
I am able to see my phone though usb deview as fastbook quark S... or while in recovery mode as xt1254. (see attached)
I have uninstalled/reinstalled drivers mulitple times but it will not take to my phone/computer.
I have used USBDeview.
I have done partition clean.
I have wiped/factory reset
I have tried RSD Lite - which will not find the device
I have tried connecting it to PC through recovery mode.
I have tried everything. Still at a stand still. Help would be greatly appreciated. I would much rather donate someone on here than to pay 200$ to insurance a new phone.
jerney307 said:
After cable got unplugged while flashing moforoot. I have tried to put stock ROM back on through boot loader.
I get stuck on your step #4. Says devices not found.
I am able to see my phone though usb deview as fastbook quark S... or while in recovery mode as xt1254. (see attached)
I have uninstalled/reinstalled drivers mulitple times but it will not take to my phone/computer.
I have used USBDeview.
I have done partition clean.
I have wiped/factory reset
I have tried RSD Lite - which will not find the device
I have tried connecting it to PC through recovery mode.
I have tried everything. Still at a stand still. Help would be greatly appreciated. I would much rather donate someone on here than to pay 200$ to insurance a new phone.
Click to expand...
Click to collapse
You have a droid turbo you have to flash back using rsd lite, I believe the rsd version you have doesn't detect your phone, uninstall it and use the one on my thread http://forum.xda-developers.com/showthread.php?t=3063470, also download your phones firmware (verizon) and your phone will be detected and it will flash
If I am on 4.4.4 and I wish to flash the Indian 5.0.2 firmware, I need to include the following line:
mfastboot flash partition gpt.bin
Click to expand...
Click to collapse
but if I later want to go back to 4.4.4, I will need to skip flashing gpt.bin, correct?
I guess I want to verify that 1) flashing gpt.bin is necessary for Lollipop and 2) running an upgraded partition doesn't cause any problems for KitKat
Thanks!
Jaocagomez said:
It's on the official firmware thread
As long as you have unlocked bootloader and only took the ota for lollipop it's ok
Click to expand...
Click to collapse
About the RDS -> In the instraction i cant find the point where i have to flash it with RDS. Only adb. So I asked where have i to run RDS, what file to put there and flash?
So, if i have Br 5.0.2 i jast flash with RDS the file with Mex 5.0.2???
dreyln said:
If I am on 4.4.4 and I wish to flash the Indian 5.0.2 firmware, I need to include the following line:
but if I later want to go back to 4.4.4, I will need to skip flashing gpt.bin, correct?
I guess I want to verify that 1) flashing gpt.bin is necessary for Lollipop and 2) running an upgraded partition doesn't cause any problems for KitKat
Thanks!
Click to expand...
Click to collapse
That's exactly how it works
fillonov said:
About the RDS -> In the instraction i cant find the point where i have to flash it with RDS. Only adb. So I asked where have i to run RDS, what file to put there and flash?
So, if i have Br 5.0.2 i jast flash with RDS the file with Mex 5.0.2???
Click to expand...
Click to collapse
No, don't flash OTA just full firmware
problem
OK, I decided to flash the India Lollipop 5.02 to my Mexico Moto Maxx which still has 4.4.4. Bootloader unlocked, rooted, has TWRP recovery installed.
I started by copying and pasting the first command while in Fastboot. I get this error message. What am I doing wrong?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Grab the mfastboot.exe from the link in the first post and put it in the same directory as fastboot.exe.
ChazzMatt said:
OK, I decided to flash the India Lollipop 5.02 to my Mexico Moto Maxx which still has 4.4.4. Bootloader unlocked, rooted, has TWRP recovery installed.
I started by copying and pasting the first command while in Fastboot. I get this error message. What am I doing wrong?
Click to expand...
Click to collapse
OK, solved the problem. I copied and pasted all the India files to my regular ADB Android/SDK2/Platform Tools folder and did everything from there. I just removed the "m" from the front of all the fastboot commands as I was no longer using "Minimal" version.
I purposefully left out the recovery image command as I want to retain TWRP...
fastboot flash partition gpt.bin
fastboot flash motoboot bootloader.img
fastboot flash radio radio.img
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
fastboot reboot
Phone is rebooting now. Wish me luck! :good:
___________
Hmmmmm... seems stuck on the boot logo for a LONG time! How long until I get worried?
---------- Post added at 04:13 PM ---------- Previous post was at 04:05 PM ----------
Steve-x said:
Grab the mfastboot.exe from the link in the first post and put it in the same directory as fastboot.exe.
Click to expand...
Click to collapse
I downloaded and installed Minimal Fastboot from the first post. I don't see an mfastboot.exe.
The link is in the first post but here it is again:
https://mega.co.nz/#!MVtz1DLb!CZTh_-wCl-qyta4Q0yZuPk_TB6Wq7Z4zElk6eArXrXk
Steve-x said:
The link is in the first post but here it is again:
https://mega.co.nz/#!MVtz1DLb!CZTh_-wCl-qyta4Q0yZuPk_TB6Wq7Z4zElk6eArXrXk
Click to expand...
Click to collapse
Thanks. I thought it was the same program as in the links above, just a different place to download it. Then Chrome blocked it twice, so I had to use IE to download it.
Flashing everything again using mfastboot. Let's see if it works this time!
At least I'm doing it on my "spare" Moto Maxx first. Not that I want to ruin it, because I still want to sell it...
---------- Post added at 04:36 PM ---------- Previous post was at 04:33 PM ----------
___________________
Still stuck on the Motorola logo like before. NOT good.
---------- Post added at 04:40 PM ---------- Previous post was at 04:36 PM ----------
________
@Jaocagomez,
You say this:
Q: Why did you not include gpt.bin in the flashing???
A: Because if you were on kitkat, installed brasil or another firmware and take a OTA to lollipop your gpt.bin version will be greater than the one you'll try to flash and it will FAIL TO FLASH, dont worry just skip that line.
Click to expand...
Click to collapse
Yet I see flash gpt.bin as your first command.
5.- Install
Copy and Paste these commands on Minimal ADB and Fastboot:
Quote:
mfastboot flash partition gpt.bin
mfastboot flash motoboot bootloader.img
mfastboot flash radio radio.img
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot erase cache
mfastboot erase userdata
mfastboot oem fb_mode_clear
mfastboot reboot
and thats all, as easy as copy from here and paste on cmd.
Click to expand...
Click to collapse
Is that a mistake? And how do I fix my phone now?
Did you flash all 8 of the system chunks?
With your bootloader unlocked there should be almost no way to mess up the phone, so no need to panic at all.
Steve-x said:
Did you flash all 8 of the system chunks?
With your bootloader unlocked there should be almost no way to mess up the phone, so no need to panic at all.
Click to expand...
Click to collapse
Yeah, figured it out. I was taking the list too literally. There are 8 sparse chunks in the India image, and I only flashed 0-4. I feel stupid. :crying:
Rebooted and everything is fine. Now on India Lollipop 5.02!
Woo hoo! I now have a Moto Turob XT1225. But for some reason TWRP didn't get saved? when I go to "recovery" I get the Android with the open chest. Hmmm... guess I can reflash TWRP, right?
Now just have to do it with my main phone -- my Puerto Rico Moto Maxx -- I mean Moto Turbo.
Need to back up everything with Titanium Backup -- again -- and transfer off to my PC so I can restore all my apps...
The phone OS is restoring the factory recovery image each boot up because it detected the recovery image wasn't the factory image. If you flash TWRP and then root the phone it will no longer get overwritten as the rooting process disables this "feature".
Steve-x said:
The phone OS is restoring the factory recovery image each boot up because it detected the recovery image wasn't the factory image. If you flash TWRP and then root the phone it will no longer get overwritten as the rooting process disables this "feature".
Click to expand...
Click to collapse
OK, flashed TWRP and rooted.
I even made a TWRP backup with root, but for some reason I can't see the TWRP folder on my Mexico Moto Maxx/Moto Turbo with Lollipop. Even when I use TWRP file manager to copy the backup file to the Download folder, I can't see it there either. Very strange. I want to upload the TWRP folder with India Lollipop for others to use.
In my Puerto Rico 4.4.4 Moto Maxx I see ALL my folders, including TWRP.
ChazzMatt said:
OK, flashed TWRP and rooted.
I even made a TWRP backup with root, but for some reason I can't see the TWRP folder on my Mexico Moto Maxx/Moto Turbo with Lollipop. Even when I use TWRP file manager to copy the backup file to the Download folder, I can't see it there either. Very strange. I want to upload the TWRP folder with India Lollipop for others to use.
In my Puerto Rico 4.4.4 Moto Maxx I see ALL my folders, including TWRP.
Click to expand...
Click to collapse
i dont know if thats a twrp bug or lollipop one.
Hi all.
Today, after rebooting my X4, I got greeted by a black bootloader screen, saying the following (attached photo for more details):
Code:
AP Flastboot Flash Mode (Secure)
No bootable A/B slot
Failed to boot Linux, falling back to fastboot
Flastboot Reason: Fall-through from normal boot mode
Choosing to enter recovery mode does nothing. I have a "Factory" option, which probably does factory reset?
It may have something to do with Magisk uptade that gave a error and couldn't get installed a week ago. It's been at least a month since I last rebooted the phone, so it's hard to know.
my question is: As the system seems ok (I was using it normally before rebooting) could I fix it without flashing stock or factory resetting and losing my data? Like booting TWRP and restoring just the boot partition from a backup?
I would rather not have to set up the whole thing again if I don't need to
Twski said:
Hi all.
Today, after rebooting my X4, I got greeted by a black bootloader screen, saying the following (attached photo for more details):
Code:
AP Flastboot Flash Mode (Secure)
No bootable A/B slot
Failed to boot Linux, falling back to fastboot
Flastboot Reason: Fall-through from normal boot mode
Choosing to enter recovery mode does nothing. I have a "Factory" option, which probably does factory reset?
It may have something to do with Magisk uptade that gave a error and couldn't get installed a week ago. It's been at least a month since I last rebooted the phone, so it's hard to know.
my question is: As the system seems ok (I was using it normally before rebooting) could I fix it without flashing stock or factory resetting and losing my data? Like booting TWRP and restoring just the boot partition from a backup?
I would rather not have to set up the whole thing again if I don't need to
Click to expand...
Click to collapse
I suppose you have bootloader unlocked. Extract boot.img from fastboot ROM (https://mirrors.lolinet.com/firmware/moto/payton/official/RETAIL/) and flash it using this command: fastboot flash boot boot.img.
Comby_sk said:
I suppose you have bootloader unlocked. Extract boot.img from fastboot ROM (https://mirrors.lolinet.com/firmware/moto/payton/official/RETAIL/) and flash it using this command: fastboot flash boot boot.img.
Click to expand...
Click to collapse
I get this:
Code:
c:\adb\platform-tools>fastboot flash boot boot.img
error: Failed to identify current slot
Can I specify a slot for it to flash?
Tried to boot twrp aswell, it gives me "(bootloader) Failed to load/authenticate boot image: Not Found"
EDIT: fastboot -set-active-slot=a / -set-active-slot=b was what I needed. Changed it to B (I knew it was lastly using B), flashed stock boot.img, booted TWRP and restored my rooted boot.img from a backup.
Twski said:
I get this:
Code:
c:\adb\platform-tools>fastboot flash boot boot.img
error: Failed to identify current slot
Can I specify a slot for it to flash?
Tried to boot twrp aswell, it gives me "(bootloader) Failed to load/authenticate boot image: Not Found"
EDIT: fastboot -set-active-slot=a / -set-active-slot=b was what I needed. Changed it to B (I knew it was lastly using B), flashed stock boot.img, booted TWRP and restored my rooted boot.img from a backup.
Click to expand...
Click to collapse
I know this thread is old, but I have the same exact problem and can't find any solution. What brought mine about was I restored my stock boot image from within Magisk and then I tried reinstalling Magisk afterwards without a reboot, but got an error. When I rebooted, the problem started. I can't possibly think of what is wrong. I tried switching slots, but it says my device doesn't support slots. Any idea what else I can try?
Twski said:
I get this:
Code:
c:\adb\platform-tools>fastboot flash boot boot.img
error: Failed to identify current slot
Can I specify a slot for it to flash?
Tried to boot twrp aswell, it gives me "(bootloader) Failed to load/authenticate boot image: Not Found"
EDIT: fastboot -set-active-slot=a / -set-active-slot=b was what I needed. Changed it to B (I knew it was lastly using B), flashed stock boot.img, booted TWRP and restored my rooted boot.img from a backup.
Click to expand...
Click to collapse
Thanx very much, man! U saved me!
no meu moto g8 plus eu tinha perdido o root e tentei reinstalar a imagem pelo maginsk e ele não começou e depois apaguei várias coisas do sistema com o twrp e agora ele só dá as mesmas mensagens e não sei o que fazer sim, eu tentei de tudo, e ao ter que instalar uma rom aparece "destino relatado tamanho máximo de download de 805273600 bytes
enviando 'boot' (65536 KB) ...
OK [2.168s]
escrevendo 'boot' ...
(bootloader) Nome de partição inválido boot
FAILED (falha remota)
concluído. tempo total: 2.319s " para todos os comunicadores
MarttinsBR01 said:
no meu moto g8 plus eu tinha perdido o root e tentei reinstalar a imagem pelo maginsk e ele não começou e depois apaguei várias coisas do sistema com o twrp e agora ele só dá as mesmas mensagens e não sei o que fazer sim, eu tentei de tudo, e ao ter que instalar uma rom aparece "destino relatado tamanho máximo de download de 805273600 bytes
enviando 'boot' (65536 KB) ...
OK [2.168s]
escrevendo 'boot' ...
(bootloader) Nome de partição inválido boot
FAILED (falha remota)
concluído. tempo total: 2.319s " para todos os comunicadores
Click to expand...
Click to collapse
Try this solution:
No bootable A/B Slot and OEM locked device, not able to revert to stock.
Hello everybody! My brother got a Moto One (XT 1941-3) last year and tried to flash it, but somehow he got the wrong Rom and bricked it. I'm trying to recover the phone to its stock rom, but the device says that it is OEM_locked, so I can't...
forum.xda-developers.com
------------------------Translated Version by Google Translate--------------------------
Tutorial to install Stock Oreo 8.1 Firmware in Moto G5sPlus
Tools:
-adb fastboot [GOOGLE DRIVE]
-Divers Motorola [GOOGLE DRIVE]
Firmware:
Oreo 8.1 Stock Patch August 2018 (Global)
SANDERS_OPS28.65-36_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
[GOOGLE DRIVE]
Firmware extracted from: https://androidfilehost.com/?w=files&flid=214680
Requirements:
1-Having the bootloader unlocked (I tried without unlocking and it did not work for me)
2-Cell charged to 50% (I prefer to have it 100% to have margin of error)
3-Motorola Drivers installed
4-A pair of eyes and READ WELL
Steps:
1-Unzip the Zip "adb fastboot"
2-Unzip the Zip of the firmware and place all its contents inside the previously decompressed adb fastboot folder
3-Turn on the phone in fastboot mode, for this: turn off the phone, keep the power button pressed + the volume down key a few seconds and release.
If I start in fastboot mode we go to point 4
4-Connect the cell phone to the PC using the USB cable
5-Enter the folder adb fastboot and inside press SHIFT + CLICK right mouse. A window will open, select "Open command window here"
6-Once the command window opens we are ready to Flash our firmware.
These are the commands:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash oem oem.img
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
7-After installing and that the cell phone start, restart
in fastboot mode and enter the stock recovery, to do
A hadr reset and restart the cell phone.
How to enter recovey?
Enter fastboot mode, select recovery and enter it,
then an android will come out saying no command,
in that step keep pressing the power key and then press
volume more and drop everything.
With that we will enter the recovery stock
8-Tutorial Finished !!!
DISCLAIMER OF LIABILITY
I can not be held responsible for any damage caused to your cell phone.
Use this tutorial at your own risk.
This tutorial was successfully tested on my cell phone
I can only provide help in case of being stuck in a step!
-------------------------------Versión Original Castellano-----------------------------------
Tutorial para instalar Firmware Stock Oreo 8.1 en Moto G5sPlus
Herramientas:
-adb fastboot [GOOGLE DRIVE]
-Drivers Motorola [GOOGLE DRIVE]
Firmware:
Oreo 8.1 Stock Parche de agosto 2018 (Global)
SANDERS_OPS28.65-36_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml [GOOGLE DRIVE]
Firmware extraído de: https://androidfilehost.com/?w=files&flid=214680
Los archivos de descarga no son de mi auditoría, solo me tome el trabajo de subirlos a Google Drive
Requisitos:
1-Tener el bootloader desbloqueado (probé sin desbloquear y no funciono para mi)
2-Celular cargado al 50% (yo prefiero tenerlo al 100% para tener margen de error)
3-Drivers de Motorola instalados
4-Un par de ojos y LEER BIEN
Pasos:
1-Descomprimir el Zip “adb fastboot”
2-Descomprimir el Zip del firmware y colocar todo su contenido dentro de la carpeta adb fastboot previamente descomprimida
3-Encender el celular en modo fastboot, para esto: apagar el celular, mantener apretado el botón de encendido + la tecla de bajar volumen unos segundos y soltar.
Si inicio en modo fastboot pasamos al punto 4
4-Conectar el celular al pc mediante el cable USB
5-Entrar a la carpeta adb fastboot y dentro presionar SHIFT + CLICK derecho del mouse. Se abrirá una ventana, seleccionar “Abrir ventana de comandos aquí”
6-Una vez se abre la ventana de comandos estamos listos para Flashear nuestro firmware.
Estos son los comandos:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash oem oem.img
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
7-Luego de instalar y que el celular inicio, reiniciar
en modo fastboot y entrar al recovery stock, para hacer
un hadr reset y reiniciar el celular.
¿Cómo entrar en recovey?
Entrar a modo fastboot, seleccionar recovery y darle entrar,
luego saldrá un android diciendo no command,
en ese paso mantener apretada la tecla de encendido y luego apretar
volumen mas y soltar todo.
Con eso entraremos al recovery stock
8-Tutorial Finalizado!!!
DESCARGO DE RESPONSABILIDAD
No me hago responsable de cualquier daño ocasionado a su celular.
Use este tutorial bajo su responsabilidad.
Este tutorial fue probado en mi celular con éxito
¡Solo puedo brindar ayuda en caso de estar atascado en algún paso!
Oreo bootloader is fixing modem problems..
So no need to skip clear modem comman @Adi5
---------- Post added at 03:43 AM ---------- Previous post was at 03:41 AM ----------
Will we get back the OTAs?
And plz also share the bootloader relocking tutorial...
Saadatrm said:
Oreo bootloader is fixing modem problems..
So no need to skip clear modem comman @Adi5
---------- Post added at 03:43 AM ---------- Previous post was at 03:41 AM ----------
Will we get back the OTAs?
And plz also share the bootloader relocking tutorial...
Click to expand...
Click to collapse
hello, shortly I will be posting the bootloader relocking tutorial
ncandroid84 said:
hello, shortly I will be posting the bootloader relocking tutorial
Click to expand...
Click to collapse
Thnx..
Give bootloader relocking tutorial on oreo fastboot rom please..
Hola amigo, sabes instalé paso a paso la rom y me di cuenta que perdí la señal, pero no el imei, tienes alguna idea de como solucionarlo? ): , tengo un backup con twrp, pero no creo que me funcione restaurándolo. Gracias por el aporte
Friend, i installed step by step the rom and realize that I lost my signal but not the emai, do you have an idea how can I fix it?, have a twrp backup, but i dont think it will work. Thank u for sharing
ncandroid84 said:
hello, shortly I will be posting the bootloader relocking tutorial
Click to expand...
Click to collapse
When is Bootloader relocking tutorial coming?
Saadatrm said:
When is Bootloader relocking tutorial coming?
Click to expand...
Click to collapse
I have not tried to block the bootloader yet, I do not know if it works and I want to be sure to post something and it really works! These days I'll be putting together the tutorial!
Hi,
That firmware isn't global. Please don't say it is because it has been causing issues with us and eu users.
Followed all the steps to the letter and everything worked perfectly. My Moto G5S Plus now has official Android Oreo 8.1. Thanks a lot for sharing these steps.
pizzaboy192 said:
Hi,
That firmware isn't global. Please don't say it is because it has been causing issues with us and eu users.
Click to expand...
Click to collapse
I have the motorcycle g5splus XT-1800 to challenge and it worked perfect, zero problems. It is assumed that this firmware bo should give network connection problems, by avoiding modem commands.
---------------------
yo tengo el moto g5splus XT-1800 retar y me funciono perfecto, cero problemas. Se supone que este firmware bo debería dar problemas de conexión de redes, al evitar los comando de modem.
ncandroid84 said:
hello, shortly I will be posting the bootloader relocking tutorial
Click to expand...
Click to collapse
ADD MODEMST COMMANDS THEY ARE SAFE I TESTED IT....:good::good:
---------- Post added at 06:15 PM ---------- Previous post was at 06:13 PM ----------
pizzaboy192 said:
Hi,
That firmware isn't global. Please don't say it is because it has been causing issues with us and eu users.
Click to expand...
Click to collapse
Which issues anything is okish on us and eu
eu I have
us have lels
Hi, it's 64 bits? Thanks!
Hola, es de 64 bits? Gracias!
jdhelman said:
Hi, it's 64 bits? Thanks!
Hola, es de 64 bits? Gracias!
Click to expand...
Click to collapse
32 bits!!
D13Gho said:
Hola amigo, sabes instalé paso a paso la rom y me di cuenta que perdí la señal, pero no el imei, tienes alguna idea de como solucionarlo? ): , tengo un backup con twrp, pero no creo que me funcione restaurándolo. Gracias por el aporte
Friend, i installed step by step the rom and realize that I lost my signal but not the emai, do you have an idea how can I fix it?, have a twrp backup, but i dont think it will work. Thank u for sharing
Click to expand...
Click to collapse
First, before doing the turorial, you had installed some custom rom or were you in android 7.1 stock?
Just in case, go back to the tutorial, I just updated the commands.
This I just tried on my XT1800 and it works fine I did not have lost imei
Lo primero, antes de realizar el turorial, tenías instalado alguna custom rom o estabas en android 7.1 stock?
Por las dudas, volve a realizar el tutorial, acabo de actualizar los comandos.
Esto lo acabo de probar en mi XT1800 y funciona bien no tuve perdida de imei
Adi5 said:
ADD MODEMST COMMANDS THEY ARE SAFE I TESTED IT....:good::good:
Updated tutorial, add the modemst1 and 2 commands and other commands.
Remove the commands and put them in order as they are in the flashfile file of the firmware zip !!! I just made the flashing and everything works perfect without loss of imei and data !!!!
Click to expand...
Click to collapse
Dos preguntas:
- ¿Es necesario estar en 7.1.1 stock o estando desde una custom ROM se puede hacer igual?
- ¿Sabés si se puede volver a bloquear el bootloader con esta ROM? (por si algún día lo quiero vender, entregarlo con el boot bloqueado)
Two questions:
- Is it necessary to be in stock 7.1.1 or with a custom rom can it be done?
- Can the bootloader be relocked with this ROM?
Hola, veo que sos de Argentina. Le has encontrado algún bug luego de la actualización?. Muchos dicen que con este método actualiza igual, aunque se tenga el bootloader bloqueado. Que pasaría si intento actualizar con el bootloader bloqueado?. Cuándo crees que llegará a Argentina la actualización?.
Hello, I see you are from Argentina. Have you found a bug after the update ?. Many say that with this method it updates the same, even if the bootloader is blocked. What would happen if I try to update with the blocked bootloader?. When do you think the update will arrive in Argentina?.
Enviado desde mi Moto G (5S) Plus mediante Tapatalk
gercdgcat said:
Dos preguntas:
- ¿Es necesario estar en 7.1.1 stock o estando desde una custom ROM se puede hacer igual?
- ¿Sabés si se puede volver a bloquear el bootloader con esta ROM? (por si algún día lo quiero vender, entregarlo con el boot bloqueado)
Two questions:
- Is it necessary to be in stock 7.1.1 or with a custom rom can it be done?
- Can the bootloader be relocked with this ROM?
Click to expand...
Click to collapse
Hello, as far as I know, everyone has problems when returning from a custom rom. If I was in that situation of being in custom rom and wanting to install this firmware, what I would do would be to enter the TWRP and completely eliminate the operating system, entering wipe / advanced and checking all the boxes (Dalvik / ART Cache - System - Data - Internal Storage - Cache) Swipe to Wipe. Then restart in fastboot mode and perform this tutorial.
I believe that by doing this you should not have problems. The same investigates a little before doing something!
Regarding blocking the bootloader, I've never had luck! There is a tutorial going around but I never tried it.
It is said that it can be blocked again!
Hola, hasta donde se, todos tienen problemas al volver de una custom rom. Si estuviera en esa situación de estar en custom rom y querer instalar este firmware, lo que haría yo sería entrar al TWRP y eliminar por completo el sistema operativo, entrando en wipe/advanced y marcando todos los casilleros (Dalvik/ART Cache - System - Data - Internal Storage - Cache) Swipe to Wipe. Luego reiniciar en modo fastboot y realizar este tutorial.
Yo creo que haciendo esto no deberías tener problemas. Igual investiga un poco antes de hacer algo!!!
Con respecto a bloquear el bootloader, nunca he tenido suerte! Hay un tutorial dando vueltas pero nunca lo probé.
Se dice que se puede bloquear nuevamente!
andresrodolfo said:
Hola, veo que sos de Argentina. Le has encontrado algún bug luego de la actualización?. Muchos dicen que con este método actualiza igual, aunque se tenga el bootloader bloqueado. Que pasaría si intento actualizar con el bootloader bloqueado?. Cuándo crees que llegará a Argentina la actualización?.
Hello, I see you are from Argentina. Have you found a bug after the update ?. Many say that with this method it updates the same, even if the bootloader is blocked. What would happen if I try to update with the blocked bootloader?. When do you think the update will arrive in Argentina?.
Enviado desde mi Moto G (5S) Plus mediante Tapatalk
Click to expand...
Click to collapse
Hola, si soy de Argentina!!! No le encontre ningún bug, ya llevo usando 1 mes y esta excelente!!! No amigo no actualiza, y con el bootloader desbloqueado ni se te ocurra instalar una OTA porque te quedará un ladrillo!!!
Yo intente instalar este firmware sin desbloquear el bootloader pero no hubo forma que se instale, asique toco desbloquear. Muchos dicen que sin desbloquear boot se puede o que seguis recibiendo OTA y en mi experiencia esto no es cierto.
Hello, if I'm from Argentina! I did not find any bug, I've been using it for 1 month and it's excellent !!! No friend does not update, and with the bootloader unlocked do not even think about installing an OTA because you will have a brick!
I tried to install this firmware without unlocking the bootloader but there was no way to install it, so I touch unlock. Many say that without unlocking boot you can or that you continue to receive OTA and in my experience this is not true.
ncandroid84 said:
Hola, si soy de Argentina!!! No le encontre ningún bug, ya llevo usando 1 mes y esta excelente!!! No amigo no actualiza, y con el bootloader desbloqueado ni se te ocurra instalar una OTA porque te quedará un ladrillo!!!
Yo intente instalar este firmware sin desbloquear el bootloader pero no hubo forma que se instale, asique toco desbloquear. Muchos dicen que sin desbloquear boot se puede o que seguis recibiendo OTA y en mi experiencia esto no es cierto.
Hello, if I'm from Argentina! I did not find any bug, I've been using it for 1 month and it's excellent !!! No friend does not update, and with the bootloader unlocked do not even think about installing an OTA because you will have a brick!
I tried to install this firmware without unlocking the bootloader but there was no way to install it, so I touch unlock. Many say that without unlocking boot you can or that you continue to receive OTA and in my experience this is not true.
Click to expand...
Click to collapse
Y si hago el intento de actualizar por fastboot con el bootloader bloqueado no provoca brick?. A algunos les salió el mensaje start up failed luego de hacer el procedimiento.
Gracias!
And if I try to update by fastboot with the blocked bootloader does not cause brick?. Some people got the message start up failed after doing the procedure.
Thank you!.
Enviado desde mi Moto G (5S) Plus mediante Tapatalk
-------------------------version translated by Google Translator-------------------------
Tutorial to make a Downgrade in the MotoG5
Tools:
-adb fastboot GOOGLE DRIVE
-Divers Motorola GOOGLE DRIVE
-Firmware to which you want to download
Requirements:
1-Having the bootloader unlocked (I tried without unlocking and it did not work for me)
2-Cell charged to 50% (I prefer to have it 100% to have margin of error)
3-Motorola Drivers installed
4-A pair of eyes and READ WELL
Steps:
1-Unzip the Zip "adb fastboot"
2-Unzip the Zip of the firmware and place all its contents inside the previously decompressed adb fastboot folder
3-Turn on the phone in fastboot mode, for this: turn off the phone, keep the power button pressed + the volume down key a few seconds and release.
If I start in fastboot mode we go to point 4
4-Connect the cell phone to the PC using the USB cable
5-Enter the folder adb fastboot and inside press SHIFT + CLICK right mouse. A window will open, select "Open command window here"
6-Once the command window opens we are ready to Flash our firmware.
These are the commands:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
Four commands were excluded, which are:
These two commands trigger full brick if you are doing a downgrade,
so not to omit them you will have a nice brick !!!!!
-fastboot flash partition gpt.bin
-fastboot flash bootloader bootloader.img
This is so as not to lose the network connection and the IMEI
-fastboot erase modemst1
-fastboot erase modemst2
7-After installing and that the cell phone start, restart
in fastboot mode and enter the stock recovery, to do
A hadr reset and restart the cell phone.
How to enter recovey?
Enter fastboot mode, select recovery and enter it,
then an android will come out saying no command,
in that step keep pressing the power key and then press
volume more and drop everything.
With that we will enter the recovery stock
8-Tutorial Finished !!!
VERY IMPORTANT, AFTER CARRYING OUT THIS DO NOT USE OTA UPDATES
I can not be held responsible for any damage caused to your cell phone.
Use this tutorial at your own risk.
This tutorial was successfully tested on my cell phone
I can only provide help in case of being stuck in a step!
---------------------------------Original version in Spanish----------------------------------
Tutorial para hacer un Downgrade en los MotoG5sPlus
Herramientas:
-adb fastboot GOOGLE DRIVE
-Drivers Motorola GOOGLE DRIVE
-Firmware al que desea bajar
Requisitos:
1-Tener el bootloader desbloqueado (probé sin desbloquear y no funciono para mi)
2-Celular cargado al 50% (yo prefiero tenerlo al 100% para tener margen de error)
3-Drivers de Motorola instalados
4-Un par de ojos y LEER BIEN
Pasos:
1-Descomprimir el Zip “adb fastboot”
2-Descomprimir el Zip del firmware y colocar todo su contenido dentro de la carpeta adb fastboot previamente descomprimida
3-Encender el celular en modo fastboot, para esto: apagar el celular, mantener apretado el botón de encendido + la tecla de bajar volumen unos segundos y soltar.
Si inicio en modo fastboot pasamos al punto 4
4-Conectar el celular al pc mediante el cable USB
5-Entrar a la carpeta adb fastboot y dentro presionar SHIFT + CLICK derecho del mouse. Se abrirá una ventana, seleccionar “Abrir ventana de comandos aquí”
6-Una vez se abre la ventana de comandos estamos listos para Flashear nuestro firmware.
Estos son los comandos:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
Se excluyeron cuatro comandos que son:
Estos dos comandos provocar full brick si está haciendo un downgrade,
por lo cual de no omitirlos tendras un bonito ladrillo!!!!!
-fastboot flash partition gpt.bin
-fastboot flash bootloader bootloader.img
Esto es para no perder la conexión de red y el IMEI
-fastboot erase modemst1
-fastboot erase modemst2
7-Luego de instalar y que el celular inicio, reiniciar
en modo fastboot y entrar al recovery stock, para hacer
un hadr reset y reiniciar el celular.
¿Cómo entrar en recovey?
Entrar a modo fastboot, seleccionar recovery y darle entrar,
luego saldrá un android diciendo no command,
en ese paso mantener apretada la tecla de encendido y luego apretar
volumen mas y soltar todo.
Con eso entraremos al recovery stock
8-Tutorial Finalizado!!!
MUY IMPORTANTE, LUEGO DE REALIZAR ESTO NO UTILIZAR ACTUALIZACIONES OTA
No me hago responsable de cualquier daño ocasionado a su celular.
Use este tutorial bajo su responsabilidad.
Este tutorial fue probado en mi celular con éxito
¡Solo puedo brindar ayuda en caso de estar atascado en algún paso!
Just something to add. Omitting GPT/bootloader may not protect you from a hard brick. Fastboot flashing older firmware onto your device may block flashing an old GPT/bootloader. If you do downgrade, please avoid using OTA updates. It appears it's not the downgrade, but rather using OTA updates that could lead to a hard brick.
Last time when I downgraded to nougat from oreo, I flashed them all still alive lol
Si ingreso los comandos de modem, no tendre problema de brick? Digo, ya que al no hacerlo, no tendria señal en el equipo.
Firmware
Hola me gustaría saber qué firmware debo descargar, mí modelo es el xt1800 RETAR. muchas gracias
Hola amigo, mira he visto 2 post tuyo, el de stock oreo 8.1 y este, pero en ambos me sucede el mismo problema de que me da error "Preflash validation failed" en los comandos "fastboot flash system system.img_sparsechunk.0 - flash oem oem.img" he probado varios firmware y siempre me da error en esos comandos, alguna sugerencia de que pueda ser? tengo el bootloader desbloqueado (o eso creo) ya que al momento de desbloquearlo me da "invalid boot state"
echo92 said:
Just something to add. Omitting GPT/bootloader may not protect you from a hard brick. Fastboot flashing older firmware onto your device may block flashing an old GPT/bootloader. If you do downgrade, please avoid using OTA updates. It appears it's not the downgrade, but rather using OTA updates that could lead to a hard brick.
Click to expand...
Click to collapse
i updated using ota and now phone only shows blinking white light on front screen. cannot boot to fastboot. Any solutions please?
Thanks
raman_ said:
i updated using ota and now phone only shows blinking white light on front screen. cannot boot to fastboot. Any solutions please?
Thanks
Click to expand...
Click to collapse
I'm not aware of any solutions that are free (unless there's a newer Oreo blankflash leaked?). It's likely you'll have to pay for a motherboard repair, either a JTAG flash or a motherboard replacement. Failing that, buy a new device.
gracias
si me funcionoooo al fin recupere el telefono
How to unlock the OEM if I do not have access to the developer menu?
When I try to remove the google account from the help and comments,
in the videos figure I have disabled javascript....
Is there any solution or suggestion?
Help Baseband imei NULL
Estimado amigo, he recuperado al fin la funcion de touch con esto, lo que sucede es que aun sacando los comandos de modem, he perdido el imei, puede que en algún otro intento anterior, como podría recuperar banda base e imei? Modelo XT1790
NEED HELP, my moto G5s plus after flashing, IMEI no lost. now i can't use my phone due to the signal SIM lost to..
please need advice.... i stay in INDONESIA
This guide doesn't work. I successfully downgrade to nougat but never got imei and signal back. And i freaking hate oreo. Sad.