I updated my version of the device from
euro open firmware
From the link http://forum.xda-developers.com/showthread.php?t=1035041
And since when I connect the device to the TV
Nothing happens
It seems the device detects the TV
According to the HDMI settings
But I do not see anything on TV?
sganach said:
I updated my version of the device from
euro open firmware
From the link http://forum.xda-developers.com/showthread.php?t=1035041
And since when I connect the device to the TV
Nothing happens
It seems the device detects the TV
According to the HDMI settings
But I do not see anything on TV?
Click to expand...
Click to collapse
Does your tv support PAL system? Hdmi on stock firmwares is working very nice afaik.
Sent from my mobile pantofla
I think you're right
The problem in my TV
Thank you!
As you probably have noticed if using Miracast, WiFi is disabled when connecting to wireless display. Is this planned to be fixed?
Very strange implementation..
Konstigt said:
As you probably have noticed if using Miracast, WiFi is disabled when connecting to wireless display. Is this planned to be fixed?
Very strange implementation..
Click to expand...
Click to collapse
No reply from the sony developers too
http://talk.sonymobile.com/thread/144129
TK8 said:
No reply from the sony developers too
http://talk.sonymobile.com/thread/144129
Click to expand...
Click to collapse
Miracast is broken in 4.2.2-update. Used it many times on the previous SW but it is not even possible to connect with 4.2.2 on the ZR. I'm trying to connect to a Netgear PTV3000 with 2.44 (beta)firmware.
On the ZR, I see the PTV3000, choose connect and nothing happens on the PTV and the ZR just counts down from 120. After 20 seconds maybe, I get a error on the PTV saying connect failed.
The "bug" (I think it's more broken by design) is still there, before connecting it notifies me of a WiFi disconnect.
So I woke up one morning turn on my TV I notice it was updating and thought nothing about it but then it went to a blank screen. I reset it then it wasn't connecting to wifi then I went on my computer and it says that if I did reset it wouldn't connect to my wifi unless I contacted my router provider. Didn't want to go through so I bought a new one. After I set it up and relaunched it went to a black screen again then exchange it and it happened again. It has nothing to do with the device it's the new update. I hope someone knows how to fix it. Please i like chromecast don't want to return it. Someone please help.
SleepyJay831 said:
So I woke up one morning turn on my TV I notice it was updating and thought nothing about it but then it went to a blank screen. I reset it then it wasn't connecting to wifi then I went on my computer and it says that if I did reset it wouldn't connect to my wifi unless I contacted my router provider. Didn't want to go through so I bought a new one. After I set it up and relaunched it went to a black screen again then exchange it and it happened again. It has nothing to do with the device it's the new update. I hope someone knows how to fix it. Please i like chromecast don't want to return it. Someone please help.
Click to expand...
Click to collapse
What TV make/model and router make/model are you using?
bhiga said:
What TV make/model and router make/model are you using?
Click to expand...
Click to collapse
Mine just "died" too.
Didn't notice if it was updating but basically had been plugged into my TV and working for months, then i tried using and my TV would just say no signal when i switched to that HDMI port.
Called amazon and have a new one on the way.
bummer.
bhiga said:
What TV make/model and router make/model are you using?
Click to expand...
Click to collapse
I have insignia TV and 2 wire modem.
SleepyJay831 said:
I have insignia TV and 2 wire modem.
Click to expand...
Click to collapse
Google says it should work, just requires change to router settings.
Did you add your Chromecast MAC to the allowed list?
https://support.google.com/chromecast/table/3477832?hl=en&ref_topic=3205565
Sent from a device with no keyboard. Please forgive typos, they may not be my own.
Fix
Mine seemed to be dead too. I tried reseting the device but without any success. The only fix by now is to remove Chromecast from HDMI, but keep power cable plugged in. So i start my tv without Chromecast being connected to hdmi port, and after the led on the chromescast became steady white, no blinking, i would connect it to it. It worked that way. Had to do this before each time i start my tv. I hope it will help u and hope that google will fix this in future update.
re: Fix
iorga_ciprian said:
Mine seemed to be dead too. I tried reseting the device but without any success. The only fix by now is to remove Chromecast from HDMI, but keep power cable plugged in. So i start my tv without Chromecast being connected to hdmi port, and after the led on the chromescast became steady white, no blinking, i would connect it to it. It worked that way. Had to do this before each time i start my tv. I hope it will help u and hope that google will fix this in future update.
Click to expand...
Click to collapse
This worked!. Thank you very much... :victory: Google, give this man a cigar, and fix this bug!!!
Same problem, same (interim) solution
thedisch said:
This worked!. Thank you very much... :victory: Google, give this man a cigar, and fix this bug!!!
Click to expand...
Click to collapse
The solution also worked for me, thanks ! :good: It's clearly a bug
Yeah, Build 14651 is having problems booting up for me too. My CC ends up going "blank" when its plugged into my Yamaha AVR. It works fine when I plug it directly into my TV or if I let it boot up while unplugged from any HDMI port.
My other two CCs on Build 13000 work fine with my AVR.
I posted to this thread about this issue:
http://forum.xda-developers.com/showthread.php?p=48445263&posted=1#post48445263
Sorry for the crosspost.
iorga_ciprian said:
Mine seemed to be dead too. I tried reseting the device but without any success. The only fix by now is to remove Chromecast from HDMI, but keep power cable plugged in. So i start my tv without Chromecast being connected to hdmi port, and after the led on the chromescast became steady white, no blinking, i would connect it to it. It worked that way. Had to do this before each time i start my tv. I hope it will help u and hope that google will fix this in future update.
Click to expand...
Click to collapse
U da man indeed +iorga!! Still not fixed as of Feb 2015 - Google's gotta get w the program!
Hello,
Hope you guys can help?
I have just got a Panasonic Veira TX-40AS640B and I have a nexus 6.
The TV has a mirroring function on it but cast screen does not pick the TV up.
Am I missing an app or do I need to use chromcast or similar??
The message on the TV reads:
Viera_txas640b_dc1b
Input devices such as a smartphone or PC display the screen to viera.
Please select viera as a output device after wireless connect mode is started by input device.
Please refer to instruction of input device such as method of connection
Waiting connection from input device
Any help appreciated
icedmunkie said:
Hello,
Hope you guys can help?
I have just got a Panasonic Veira TX-40AS640B and I have a nexus 6.
The TV has a mirroring function on it but cast screen does not pick the TV up.
Am I missing an app or do I need to use chromcast or similar??
The message on the TV reads:
Viera_txas640b_dc1b
Input devices such as a smartphone or PC display the screen to viera.
Please select viera as a output device after wireless connect mode is started by input device.
Please refer to instruction of input device such as method of connection
Waiting connection from input device
Any help appreciated
Click to expand...
Click to collapse
The Nexus 6 doesn't support MHL (VieraLink in Panasonic words) out of the box. Easiest way is just to get a Chromecast for $30. That's what I use on my Panasonic flat screen.
Or maybe try the build.prop edit if you're rooted.. Not sure it'd work but why not? I'll try to find it right now
Add this to build.prop I you'd like to try.. Idk if it breaks anything or its fully functional. Or if you even want to go through the trouble haha
persist.debug.wfd.enable=1
grim489 said:
Or maybe try the build.prop edit if you're rooted.. Not sure it'd work but why not? I'll try to find it right now
Add this to build.prop I you'd like to try.. Idk if it breaks anything or its fully functional. Or if you even want to go through the trouble haha
persist.debug.wfd.enable=1
Click to expand...
Click to collapse
Unfortunately I'm not rooted currently. I actually don't feel the need to with this phone
I'm sure in time I will root it.
I thought I would need Chromecast but wanted to check. Best I get shopping then!
i have a Pioneer AVH-X8700BT and i have tried to connect a Chromecast 2.
but... when i connect the radio see the HDMI source but i see only black screen
i think there is a HDCP problem...
anyone have a trick for solve this problem?