Database Develop

Need Boot Help

I have two droid 3's and I rooted them both and went to install a blue theme on one of them from the rom manager app and it worked great, so I did it on my second one, too. When it was in the reboot process it never finished bootoing and it stopped at the red M. All it shows is the boot logo, not the boot animation. I have tried flashing it with rsd lite, but it always fails. Is there any other ideas as to what I should do?

You need to get rsdlite working(does it work on the other phone?). Get the drivers installed from motohelper (or reinstall) if needed, get the phone into ap fastboot and sbf to stock and go from there. Check this thread on users with the same issue.

Willis111 said:
You need to get rsdlite working(does it work on the other phone?). Get the drivers installed from motohelper (or reinstall) if needed, get the phone into ap fastboot and sbf to stock and go from there.
Click to expand...
Click to collapse
Yes, the theme works on the other phone. I will get the drivers and try again and will get back to you. Thanks for the help so far.

RaTTeDH said:
Yes, the theme works on the other phone. I will get the drivers and try again and will get back to you. Thanks for the help so far.
Click to expand...
Click to collapse
I meant rsdlite, have you ever used it with either phone without having an issue? I edited my previous post, added a link you might want to check out.

Instead of RSD Lite, I'd suggest using the quick unbricking script. It works for XT862 (maybe why Willis didn't recommend it). I have a mirror of it below. It's a ~450MB .zip file that is NOT flashable from the phone, but must be unzipped onto your desktop where you then boot into AP Fastboot, connect with the stock cable, and run a batch file from the download and it'll restore the phone's software to box stock in about 5 minutes.
http://minus.com/mB0zknQrL/

I have never used RSDLite before. So I do not know if it works. But when I am flashing it with the stock 5.6.890 it fails at step 5. It reboots the bootloader. But it fails always at step 5. Let me try the other replys...

redsox985 said:
Instead of RSD Lite, I'd suggest using the quick unbricking script. It works for XT862 (maybe why Willis didn't recommend it). I have a mirror of it below. It's a ~450MB .zip file that is NOT flashable from the phone, but must be unzipped onto your desktop where you then boot into AP Fastboot, connect with the stock cable, and run a batch file from the download and it'll restore the phone's software to box stock in about 5 minutes.
Click to expand...
Click to collapse
I have downloaded this and tried this. When I run the application moto.fastboot.exe it takes like 30 seconds and when I run the batcch file it immediately finishes and says moto fastboot is not recognized as an internal or external command, operable file or command. And finishes immediately. Sigh.

redsox985 said:
Instead of RSD Lite, I'd suggest using the quick unbricking script. It works for XT862 (maybe why Willis didn't recommend it). I have a mirror of it below. It's a ~450MB .zip file that is NOT flashable from the phone, but must be unzipped onto your desktop where you then boot into AP Fastboot, connect with the stock cable, and run a batch file from the download and it'll restore the phone's software to box stock in about 5 minutes.
http://minus.com/mB0zknQrL/
Click to expand...
Click to collapse
The unbrick script will flash a vzw rom to your xt860 and have you stuck at the M logo anyways so I wouldn't suggest trying that. If you haven't used rsdlite before and are having trouble with it now you probably need to install the drivers from the motohelper software.
1./ download the drivers (from motorola)
2./ shutdown phone and turn it on by hold m + power
3./ select ap fastboot mode, enter and plug your phone into the computer ignoring any add new hardware
4./ start the driver install and follow it through
5./ unplug and replug your phone with computer leaving it fastboot mode.
Rsdlite should show your device under listed devices when you start it up at this point and allow you to flash w/e rom. I would suggest using the iucell or brazil retail fastboot files from the xt860 fastboot thread to get your phone up.

I fixed it using CMD in Windows flashing some stuff. Thanks guys!

[HELP] Unbrick RAZR i X890

Hi people, I have a big problem with my friend's Razr i, I was trying to root it, but i didn't want to unlock my bootloader so tried several methods but not a single one worked, So i tried the one for unlocked bootloaders and ended up bricking my device, Now It's stuck on fastboot mode.
I've tried to flash some brazilian firmwares via RSD lite, but it get stuck on "6/9 flashing radio_signed" SO PLEASE SOMEONE GUIDE ME TO THE SOLUTION WHAT AM I DOING WRONG?
PS: Also tried to flash an argentinian Firmware but it didn't even let me start flashing bringing the error "Faled flashing process. Unknown fastboot command. (getvar)"
PS2: Also tried the eternityprj Alternate method without RSD, and it gets stuck on flashing recovery... and it also prompts some errors you can see in the attached file.
HELP ME PLEASE AS I SAID THE RAZR IS A FRIEND'S PHONE NOT MINE, I NEED TO SAVE IT.

Vaizen said:
Hi people, I have a big problem with my friend's Razr i, I was trying to root it, but i didn't want to unlock my bootloader so tried several methods but not a single one worked, So i tried the one for unlocked bootloaders and ended up bricking my device, Now It's stuck on fastboot mode.
I've tried to flash some brazilian firmwares via RSD lite, but it get stuck on "6/9 flashing radio_signed" SO PLEASE SOMEONE GUIDE ME TO THE SOLUTION WHAT AM I DOING WRONG?
PS: Also tried to flash an argentinian Firmware but it didn't even let me start flashing bringing the error "Faled flashing process. Unknown fastboot command. (getvar)"
PS2: Also tried the eternityprj Alternate method without RSD, and it gets stuck on flashing recovery... and it also prompts some errors you can see in the attached file.
HELP ME PLEASE AS I SAID THE RAZR IS A FRIEND'S PHONE NOT MINE, I NEED TO SAVE IT.
Click to expand...
Click to collapse
your secure level was to high for a non bootloader method and if you done a method with a unlocked bootloader and your bootloader was locked thats bad.
unlock your bootloader >>WARRANTY VOID<< install cwm and use any backup. or flash the 39 gb fw but i think you have yet to unlokc the bootloader to safe it.. and be patient dont try to much stuff if your battery goes low you need a factory adapter or something like this to charge ur razr i if the battery is down.
regards hope you get it waorking again

I solved my problem this way
Vaizen said:
Hi people, I have a big problem with my friend's Razr i, I was trying to root it, but i didn't want to unlock my bootloader so tried several methods but not a single one worked, So i tried the one for unlocked bootloaders and ended up bricking my device, Now It's stuck on fastboot mode.
I've tried to flash some brazilian firmwares via RSD lite, but it get stuck on "6/9 flashing radio_signed" SO PLEASE SOMEONE GUIDE ME TO THE SOLUTION WHAT AM I DOING WRONG?
PS: Also tried to flash an argentinian Firmware but it didn't even let me start flashing bringing the error "Faled flashing process. Unknown fastboot command. (getvar)"
PS2: Also tried the eternityprj Alternate method without RSD, and it gets stuck on flashing recovery... and it also prompts some errors you can see in the attached file.
HELP ME PLEASE AS I SAID THE RAZR IS A FRIEND'S PHONE NOT MINE, I NEED TO SAVE IT.
Click to expand...
Click to collapse
Hello good morning
I brick 2 phones trying to get one of them and in the process did fail at 2, how the recovery?
1. - Use RSD Lite version 6.1.4
2. - Use 1 extra phone (htc wildfire root and backup CWMR in case of failure)
3. - Use a GB retail rom (CFC_8.7.1I-110_IFW-39_S7_UCASMI01E1017.0R_USASMIICSRTGB_P042_A005_S1FF_fb.xml)
4. - The phone to unbrick, put fastboot mode, switching on via the power button and vol (-) until the fastboot mode screen read "fastboot reason:" if it does not, re-try until there is
5. should not say "fastboot reason: flash failure, or anything else xxxxxx xxxx xxxxx ............"
6. - Boot rsd lite 6.1.4, select retail rom, and indicate that only "unzip" connects your motorola razr I, and it connects back to the other phone (in my case htc wildfire), which has a debug mode enabled.
7. - Note, that in the window of the Rsd Lite in row 1, the Razr I phone is detected, then you start flashing in RSD Lite 6.1.4, see screenshot of your razr I to see that data is being sent, (the other phone should not be affected and only serves as a decoy to usb drivers, Rsd lite at least do not damage to my phone)
8. - Remember flashing erase the card was in your internal Razr I therefore will lose programs, photos or music you had or downloaded to the SD or internal virtual
9. - Flashing can stop and have to do everything again, but remember that no fastboot mode screen should read:
"fastboot reason: flash failure or otherwise else xxxxxx xxxxxxx ......." must be clean that is just:
"fastboot reason: "
luck : Good:
Warning, do not take responsibility for any damage to your cell involved in the process, ......... the lure of the phone can be found on youtube and just suits the way because of my need to get my phone ........ in no way am programmer or software developer, for which only comment what turned out ok to me
excuse my bad English

jacbarahona72 said:
Hello good morning
I brick 2 phones trying to get one of them and in the process did fail at 2, how the recovery?
1. - Use RSD Lite version 6.1.4
2. - Use 1 extra phone (htc wildfire root and backup CWMR in case of failure)
3. - Use a GB retail rom (CFC_8.7.1I-110_IFW-39_S7_UCASMI01E1017.0R_USASMIICSRTGB_P042_A005_S1FF_fb.xml)
4. - The phone to unbrick, put fastboot mode, switching on via the power button and vol (-) until the fastboot mode screen read "fastboot reason:" if it does not, re-try until there is
5. should not say "fastboot reason: flash failure, or anything else xxxxxx xxxx xxxxx ............"
6. - Boot rsd lite 6.1.4, select retail rom, and indicate that only "unzip" connects your motorola razr I, and it connects back to the other phone (in my case htc wildfire), which has a debug mode enabled.
7. - Note, that in the window of the Rsd Lite in row 1, the Razr I phone is detected, then you start flashing in RSD Lite 6.1.4, see screenshot of your razr I to see that data is being sent, (the other phone should not be affected and only serves as a decoy to usb drivers, Rsd lite at least do not damage to my phone)
8. - Remember flashing erase the card was in your internal Razr I therefore will lose programs, photos or music you had or downloaded to the SD or internal virtual
9. - Flashing can stop and have to do everything again, but remember that no fastboot mode screen should read:
"fastboot reason: flash failure or otherwise cuarquier xxxxxx xxxxxxx ......." must be clean that is just:
"fastboot reason: "
luck : Good:
Warning, do not take responsibility for any damage to your cell involved in the process, ......... the lure of the phone can be found on youtube and just suits the way because of my need to get my phone ........ in no way am programmer or software developer, for which only comment what turned out ok to me
excuse my bad English
Click to expand...
Click to collapse
Could PM Me with the instructions in spanish, there are some things that i do not understand in your english
Tried to use your method but RSD lite got stuck on "4/11 erase userdata" and the phone says "program dummy sp block for userdata" I don't thin I understood well the part of the second phone, does it have to be on, i mean normal on, or does it have to be in flashmode aswell?

stuck at red logo

Hey guys,
i did stupid things witch my razr i and now i'm completely lost…maybe someone can help?
I've been impatient enough to try to flash the leaked jb rom 3 days ago. That did'nt work
No, whenever i power up the phone it shows the red M logo and nothing happens.
I can power it down by holding vol+down and power for more than 4 seconds.
If i release the keys, it goes back to te red M,
If i keep holding vol+down it boot s into AP fastboot flash mode (secure boot) 20.0f
i can choose recovery and that'll work, but i don't have an update for external storage. rebooting from there leads to red M.
Normal Powerup, Factory and BP Tools are choosable, log says Booting into… but nothing happens after that, i'll stay in fastboot.
Power off works.
I tried to flash various images via »fastboot flash boot/recovery/system«, but nothing worked out.
I flashed the files from Razri_Root_Linux, two files (retail central europe) from here sbf.droid-developers, but nothing helped, every reboot leads to the red M.
I read about RSD-Lite, tried to install it under Win7, got it, but was lost after the Program always complained about an invalid xml.
Since i don't own that machine i went back to my linuxbox where i found sbf_flash, but i don't get it how to put the pieces together (which file/s to use)
Any hints on how to go from here?
[EDIT:] I downloaded 91.2.26001.Retail.en.EU.zip and did all the steps from flashandboot.bat, read
fastboot flash boot
fastboot flash system
fastboot flash recovery
next step ist to select recovery, did this an cwm comes up, sideloaded RAZRiRoot2.zip everything is pisitively quited, no errors are shown.
reboot leads to red M
wiped data/factory reset, reboot
red Logo.
I'm completely lost, please help
[\EDIT]
greetings, D.

I had same problem
Hello.
I had same problem because I did very stupid thing. I flashed homemade JB and because some apps don´t work I tried downgrade my i to ICS back....
My i stucked at the red M then I tried same thing as you and phone still booted into red M.
So I tried in windows cmd and FlashAndRoot.bat from this .zip "91.2.26001.Retail.en.EU - 4.1.2" it did nothing, but I tried to choose in fastboot mode BP Tools, then my i booted and started to flash JB what I can see in command window. Phone was still connected to PC. After next reboot my phone has work normally with JB.
I hope to help you. Let me know.
Lucki

Hi Lucki
thanks for jumping by.
Lucki_X said:
Hello.
So I tried in windows cmd and FlashAndRoot.bat from this .zip "91.2.26001.Retail.en.EU - 4.1.2" it did nothing, but I tried to choose in fastboot mode BP Tools,
Click to expand...
Click to collapse
I tried this, and display on razr i says »Booting into BP Tools mode…«
and nothing more happens, display stays on…
and after some time pc automounts a "cd-rom drive" with some motorola files (Autorun.inf MDMSetup.xml MotorolaDeviceManagerSetup.exe MDMSetup.ini MotorolaDeviceManager_2.2.28)
but it still won't reboot…
i don't know.

Hi.
I had opened command window, "FlashAndRoot.bat" was running (I pressed any key) process was running (it means freezing ) and at this time I chose in fastboot booting into BP tools mode. My phone did restart and after it "FlashAndRoot.bat" process started to flash JB. After flashing my phone is going normally with JB. But some apps don´t work in JB.
Lucki

Lucki_X said:
Hi.
I had opened command window, "FlashAndRoot.bat" was running (I pressed any key) process was running (it means freezing ) and at this time I chose in fastboot booting into BP tools mode. My phone did restart and after it "FlashAndRoot.bat" process started to flash JB. After flashing my phone is going normally with JB. But some apps don´t work in JB.
Lucki
Click to expand...
Click to collapse
Doesn't work. :crying:
since i use linux i opened FlashAndRoot.bat in texteditor and executed the comands from there in terminal
only chance for the script to stop and wait is IMHO(correct-me-if-i'm-wrong) "adb wait-for-device push RAZRiRoot2.zip /sdcard/RAZRiRoot2.zip & adb reboot bootloader"
but that message "Booting into BP Tools mode…" just stays there forever, or does it take longer than 5minutes?

dogo77 said:
but that message "Booting into BP Tools mode…" just stays there forever, or does it take longer than 5minutes?
Click to expand...
Click to collapse
In my case it booted within 10 second and ran.
I am noob, I am writing just my experience. I couldn´t give you another advice, sorry.

I'm not sure how far the real installation went, but i would find Windows computer, get RSD (6.0-6.14) and try to flash ICS first. If failed due to impossibility of downgrading, then try JB. While you are able to boot to Recovery - don't loose hope yet

okaban said:
I'm not sure how far the real installation went, but i would find Windows computer, get RSD (6.0-6.14) and try to flash ICS first. If failed due to impossibility of downgrading, then try JB. While you are able to boot to Recovery - don't loose hope yet
Click to expand...
Click to collapse
Yeah. I'm still stuck at the red logo, or indeed, at a blueish "Bootloader unlocked warnig" message since i was able to install parts of an image from sbf.droid-developers. But flashing always fails while trying to flash system.img_signed.
After reading and trying a lot these last days i think i have to install windows somewhere just to get rsd-lite to run.
sbf_flash for linux didn't work for me and fastboot gives stange warnings about "Invalid sparse file format at header magi"…
so i'll give rsd a try before i give up. As i read in posts by HSDPilot, this is the only tool that works
thanks for your help!

help please. stuck in boot loader screen

What's up guys. I recently bought a 2014 moto x us cellular. Turns out it was stuck asking for the last Google sign in. I decided to flash back to stock using fastboot. Used motofastboot and entered all the commands correctly, but now it says failed to boot or boot up failed after flashing the m Motorola screen for a split second. It also says failed to validate system image in pink. I tried both the 5.0 and 5.1 factory firmware. Fastboot didn't say any errors. I can't get rsd to see it. Any suggestions? Do I need to flash all 9 of the system.img_sparsechunk files?

If RSD Lite cannot see your phone it might have to do with no drivers installed or improperly installed.
You'll have to deinstall any drivers related to Motorola and/or ADB cleanly using USBDeview http://www.majorgeeks.com/files/details/usbdeview.html and DriverStore Explorer [RAPR.exe] https://driverstoreexplorer.codeplex.com/releases/view/99694 .
1.) In USBDeview you'll want to highlight anything related to Motorola, ADB, Google ADB driver, Samsung ADB driver etc and then right click and select 'Uninstall Selected Devices'. Done with this program.
2.) In DriverStore Explorer [RAPR.exe] click on Enumerate, then you'll also want to select the checkboxes next to anything related to items listed in step 1, then on the right side choose 'Force Deletion' box, then click Delete Package. Done with this program.
3.) Restart Windows
4.) Download Lollipop 5.0.2 for USC from http://motofirmware.center/files/file/169-victara_usc_502_lxe2246-33_cid9_cfcxmlzip/ or Lollipop 5.1 for USC from http://motofirmware.center/files/file/248-victara_usc_51_lpe2332-213_cid9_cfcxmlzip/ depending on your current firmware version.
5.) Install Motorola USB drivers for our device (#82) from http://androidxda.com/download-motorola-usb-drivers
6.) Connect your phone, let Windows install the necessary drivers.
7.) Run RSD Lite, browse for the firmware you downloaded earlier, choose 'Decompress and Flash' on the box that pops up. *Do not try to downgrade Lollipop versions as it will fail and you'll end up with a third of the files flashed before it errors*
8.) Wait for your firmware to flash, no need to wipe after the flash since RSD Lite runs the 'erase userdata' & 'erase cache' commands after flashing.
I recommend flashing with RSD Lite since it does everything correctly and automatically. These steps will help make sure your system has Motorola device drivers properly installed.
Try this and let me know if this works. If not, we'll troubleshoot further.

Thanks for such a detailed description man. Drivers are something I always struggle with. I'm downloading everything now and ill try when I get home. I'll let you know how it turns out. Thanx again

Help! My Motorola RAZR I XT890 cannot be "unbricked" and I tried several methods...

Help! My Motorola RAZR I XT890 cannot be "unbricked" and I tried several methods...
Hello!
I unlocked the bootloader successfully, then I tried to root my phone using The Razr guy method and I used the "RAZRi_Root_Windows" file, while rooting my phone went to the "warning bootloader unlocked" screen and it just loops forever from that screen, the bat file, showed that it successfully rooted my phone. I tried to fix it using rsd lite, but it never detects my phone, so I searched for a way to make my pc able to detect it, so I found I could use Intel xFSTK, installed it but still nothing it doesn't appear as shown in the tutorial, I even downloaded the dll file that it needed to run, but after running the xFSTK DLDR or something like that, the application is completely empty, and I saw it should show some tools to download something. Also tried using Linux Zorin, but it only says that my XT890 cannot be accessed and shows an usb error code.
I am able to enter the fastboot screen, the one you get by pressing POWER and VOLUME DOWN, also it charges my batter completely normal. Also my pc is able to show that the XT890 is connected, but only before installing the drivers and it shows the CD installer for the Motorola Device Manager and some other files (all this while looping), and if I enter the fastboot flash mode, it appears as "fastboot smi S", with a yellow triangle and an exclamation sign while in Windows device manager. It has Jelly Bean update from telcel (mexico), and I already have the xml.zip file to reinstall it.
I use windows 8.1 , and as mentioned Linux Zorin on my PC.
Could some help me with it...if you now how to fix it please list every single step on how to do it T_T, THANKS IN ADVANCE!!!!

It looks like the root method changed something bad in your system partition and that's why it won't boot up. First thing to do is installing the correct Motorola drivers. When in fastboot the device should be normally listed and could be acceded by fastboot. If fastboot is working well, use rsd lite to recover it or flash the system partition manually.
If everything is working well, consider installing a custom recovery and flashing a SuperSU zip for root access.

Hazou said:
It looks like the root method changed something bad in your system partition and that's why it won't boot up. First thing to do is installing the correct Motorola drivers. When in fastboot the device should be normally listed and could be acceded by fastboot. If fastboot is working well, use rsd lite to recover it or flash the system partition manually.
If everything is working well, consider installing a custom recovery and flashing a SuperSU zip for root access.
Click to expand...
Click to collapse
Thanks for answering!!
I've checked on some websites that if the phone is not detected by RSD Lite it maybe due to a bug in the phone's driver that happens only on windows 8/8.1, so I will try to do the same thing on windows 7 and see what happens...
Hope it works...T_T

weird_user said:
Thanks for answering!!
I've checked on some websites that if the phone is not detected by RSD Lite it maybe due to a bug in the phone's driver that happens only on windows 8/8.1, so I will try to do the same thing on windows 7 and see what happens...
Hope it works...T_T
Click to expand...
Click to collapse
That could be it.
I just noticed u have unlocked your bootloader. That means u have used fastboot earlier to get the unlock code into the device. So the drivers should work perfectly if u are in the good device modes. Try to flash the system_signed image manually though fastboot and see what happens ("fastboot flash system <path-to-system_signed-image>", u may need mFastboot for that(is inside the rsd-lite package))
Just for the record if u didn't know:
Adb: works only in selected recovery's and normal boot(sometimes in charging mode as well)
Fastboot: works only in AP fastboot mode (power+vol-down, black screen with white/blue text (rsd-lite needs this mode))
XFSTK: works only in medfield flash modues, something u don't need to be with that kind of error

Thanks again!!!
Hazou said:
That could be it.
I just noticed u have unlocked your bootloader. That means u have used fastboot earlier to get the unlock code into the device. So the drivers should work perfectly if u are in the good device modes. Try to flash the system_signed image manually though fastboot and see what happens ("fastboot flash system <path-to-system_signed-image>", u may need mFastboot for that(is inside the rsd-lite package))
Just for the record if u didn't know:
Adb: works only in selected recovery's and normal boot(sometimes in charging mode as well)
Fastboot: works only in AP fastboot mode (power+vol-down, black screen with white/blue text (rsd-lite needs this mode))
XFSTK: works only in medfield flash modues, something u don't need to be with that kind of error
Click to expand...
Click to collapse
Hazou said:
That could be it.
I just noticed u have unlocked your bootloader. That means u have used fastboot earlier to get the unlock code into the device. So the drivers should work perfectly if u are in the good device modes. Try to flash the system_signed image manually though fastboot and see what happens ("fastboot flash system <path-to-system_signed-image>", u may need mFastboot for that(is inside the rsd-lite package))
Just for the record if u didn't know:
Adb: works only in selected recovery's and normal boot(sometimes in charging mode as well)
Fastboot: works only in AP fastboot mode (power+vol-down, black screen with white/blue text (rsd-lite needs this mode))
XFSTK: works only in medfield flash modues, something u don't need to be with that kind of error
Click to expand...
Click to collapse
I am able to enter RECOVERY MODE NOW (I installed CWM, before this I was only able to see the android lying on the floor ans saty dead right there, I was supposed to press Volume + and - and the camera button at the same time, but nothing happened), it seems to be easier to unbrick it this way, but now the problem is that after I follow the steps to reinstall the original ROM, it aborts installation. I read this may be caused due to a file on the zip file, I looked for it, but nor the Folder META-INF, whic is supposed to contain a "update-script" file, nor that file is anywhere in the ROM folder...
I've even tried cyanogenmod (after first trying Telcel original ROM and then the retail GB ROM) cuz it actually contains the folder previously mentioned and the file is in a different path, but it is there, I modified it, but got a "Can't open tmd/update.zip (bad) Installation aborted" error...I don't know what else to do T_T...
Note: I also used sideload and CWM to install it, but the same thing happens. Also checked some other post about this issue, but none has helped me...

What zip file are u installing?
If u want to go back to stock, just use a RSD lite package for 4.1.2 or install TWRP and restore a TWRP backup to go to 4.4.2. There is no official RSD lite package for 4.4.2 and the update.zip doesn't work if your system doesn't boot already.

Hazou said:
What zip file are u installing?
If u want to go back to stock, just use a RSD lite package for 4.1.2 or install TWRP and restore a TWRP backup to go to 4.4.2. There is no official RSD lite package for 4.4.2 and the update.zip doesn't work if your system doesn't boot already.
Click to expand...
Click to collapse
It's done! Thanks!
I actually used another computer with windows 10, also I used RSD Lite and it worked just fine, now I have the stock ROM from Telcel and it it is working almost normal. The only abnormality I've seen is that my phone turns itself off when battery is at 20%, I searched info about that problem and it says I may re calibrate the battery, so it may work fine again, but now I need to root again to be able to do that T_T, hope it works this time...
THANKS! again!