Several times in my week with the moto x internet will stop working despite the 4g sign being blue in the status bar. It happens in crowded areas where there is likely a lot of people connecting to a single cell tower (concert, sporting events, etc), but friends on other Verizon phones (iPhone and S4) still have service as their phone has switched them to 3g.
Is there a way to force 3g mode? In Settings -> Mobile Networks -> Network Mode there is only the option for LTE / CDMA and GSM / UMTS (which doesn't work), not CDMA only mode like there was on the Gnex. Any apps or tricks to force the switch?
Use the app LTE OnOff from the Play Store. Says it's for HTC Thunderbolt but works fine on the X.
-Sent from my Droid Mini.-
Related
Any one else loosing LTE data and droping to hspa while on a call. Happening to both my vivid and skyrocket.
Located in Houston, Tx
The reason for this is that, currently, LTE is data-only. Until LTE providers begin to deploy Vo-LTE (Voice over LTE. Basically VoIP, on and LTE network), the only way you will be able to engage the voice stack on your hardware and access data at the same time is if you fall back to UMTS, which has always integrated both services (voice and data) together.
Unlike Verizon lte, art lte uses circuit switch fallback. Can't do hspa and LTE at one time.
Sent from my HP Touchpad using xda premium
THAT SUCKS ATT!!!! I have to talk & use internet on the HDSPA+ network....it seems so slow. Am I the only person this happens to?
It happens to *everyone* because that is the way it works. Notice that every time you make a call the "LTE" tag goes away....and stays gone until you hang up and the phone reselects back.
There will not be any LTE voice until an IMS is up and running...
Jade Eyed Wolf said:
The reason for this is that, currently, LTE is data-only. Until LTE providers begin to deploy Vo-LTE (Voice over LTE. Basically VoIP, on and LTE network), the only way you will be able to engage the voice stack on your hardware and access data at the same time is if you fall back to UMTS, which has always integrated both services (voice and data) together.
Click to expand...
Click to collapse
I know its data only. But dont see why it has to drop off. I have been playing with the build.prop. And it has
#device supports simultaneous 1x voice + LTE
#ro.config.svlte1x=true
So i guess at one point we will have this ability.
This phone only has one radio built in and can't run on both UMTS and LTE at the same time.
I think that setting is referring to a Verizon type LTE device. They have two radios and don't do CSFB like the Vivid/Skyrocket.
Each phone type has it's own pros and cons.
Hey All,
I searched the web on and on and cant figure it out.
My provider Vodafone in holland provides me with 4G.
On some sites i read there is a minor update which activates the LTE option.
that update is for the I9505..
I cant find if its possible to unlock my LTE option.
i have the I9295. And throug kies or OTA is no update
I hope you can help me out guys.
Thaantje said:
Hey All,
I searched the web on and on and cant figure it out.
My provider Vodafone in holland provides me with 4G.
On some sites i read there is a minor update which activates the LTE option.
that update is for the I9505..
I cant find if its possible to unlock my LTE option.
i have the I9295. And throug kies or OTA is no update
I hope you can help me out guys.
Click to expand...
Click to collapse
I can't really help you but as far as I know LTE is already unlocked and working on all international S4 Actives. Mine certainly worked perfectly out of the box - although I turned it off promptly because I have ****ty 4G coverage where I live so it was nothing but a battery drain for me.
Are you sure you have a 4G sim card, and that you are in an area where 4G has coverage?
If you go in under settings > connections > more networks > mobile networks > network mode don't you have the LTE option at the top?
Cederic said:
I can't really help you but as far as I know LTE is already unlocked and working on all international S4 Actives. Mine certainly worked perfectly out of the box - although I turned it off promptly because I have ****ty 4G coverage where I live so it was nothing but a battery drain for me.
Are you sure you have a 4G sim card, and that you are in an area where 4G has coverage?
If you go in under settings > connections > more networks > mobile networks > network mode don't you have the LTE option at the top?
Click to expand...
Click to collapse
Im not 100% but i got the textmessage from my provider, so i recon they only send it to people who are able to use the 4G.
Yes, i am in a 4g coverage area
i dont have the LTE option at the top no. i have:
- wcdma/gsm
- only wcdma
- only gsm
Thaantje said:
Im not 100% but i got the textmessage from my provider, so i recon they only send it to people who are able to use the 4G.
Yes, i am in a 4g coverage area
i dont have the LTE option at the top no. i have:
- wcdma/gsm
- only wcdma
- only gsm
Click to expand...
Click to collapse
Well then I really have no idea - the only thing I can think of is that you might need to replace your sim card if your provider didn't already do so in advance of the 4G rollout. Hopefully someone with more information might step in here, but the international version is LTE capable out of the box. If you don't hear anything else I'd suggest to try and contact vodafone and get a clear answer from them first.
If you check the mobile networks in your area and don't see anything that supports LTE, you may just live in an area that doesn't have it yet (people get 4G and LTE somewhat mixed up - 4G is the overall identifier for a whole class of technologies with "4th generation cellular networks" basically while LTE is technically one of those technologies so, it should rightfully be classified as 4G in most respects.
Having said that, the only way I got my GS4A to function in LTE mode - meaning it actually shows LTE in the notification bar under the 4 with a small G and LTE underneath it - was to go into the service menu (*#*#4636#*#*) and change the preferred network type to either LTE only or LTE/GSM auto (PRL). Once I did that the radio would reset and connect and then it would be in proper LTE mode. Doing a speedtest with the Speedtest.net app shows LTE as the connection whereas with my standard setting which is WCDMA Preferred (T-Mobile AWS) it'll just show as "4G."
I've had no luck making alterations in the Settings/Mobile Networks section, I have to change it in the service menu to get LTE functional. I don't use it because here in Vegas where I live (specifically my home location) the LTE mode gets me about 1-2 bars of signal (about 8-12Mbps) whereas the WCDMA Preferred setting pulls in 5 bars rock solid and 25-35Mbps.
Can't do screenshots or I'd add them, I'm running the pre-release MI2 ROM presently and that aspect is borked.
br0adband said:
If you check the mobile networks in your area and don't see anything that supports LTE, you may just live in an area that doesn't have it yet (people get 4G and LTE somewhat mixed up - 4G is the overall identifier for a whole class of technologies with "4th generation cellular networks" basically while LTE is technically one of those technologies so, it should rightfully be classified as 4G in most respects.
Having said that, the only way I got my GS4A to function in LTE mode - meaning it actually shows LTE in the notification bar under the 4 with a small G and LTE underneath it - was to go into the service menu (*#*#4636#*#*) and change the preferred network type to either LTE only or LTE/GSM auto (PRL). Once I did that the radio would reset and connect and then it would be in proper LTE mode. Doing a speedtest with the Speedtest.net app shows LTE as the connection whereas with my standard setting which is WCDMA Preferred (T-Mobile AWS) it'll just show as "4G."
I've had no luck making alterations in the Settings/Mobile Networks section, I have to change it in the service menu to get LTE functional. I don't use it because here in Vegas where I live (specifically my home location) the LTE mode gets me about 1-2 bars of signal (about 8-12Mbps) whereas the WCDMA Preferred setting pulls in 5 bars rock solid and 25-35Mbps.
Can't do screenshots or I'd add them, I'm running the pre-release MI2 ROM presently and that aspect is borked.
Click to expand...
Click to collapse
I can check my area on the vodafone site. I live in a 4G network area 100%!
i guess my wcdma is sufficient then.. didnt experience speedboost tho..
br0adband said:
I've had no luck making alterations in the Settings/Mobile Networks section, I have to change it in the service menu to get LTE functional.
Click to expand...
Click to collapse
That would be because you're on the i537 from ATT, rather than the i9295 that this discussion is about. I checked google and vodafone holland does indeed use LTE on the right bands in its brand new rollout, so it isn't that - most likely it's his sim that needs replacing or it's just not activated on his account yet.
I want to select network and choose 3G for tmobile/ptel. It works great on my defy.
I am out on the edge of town where 2g and 4g reception are weak but 3g is great. Sadly the phone always either chooses 2g or 4g and is having problems getting a signal out here.
I know for a fact I have tmo/ptel 3g here. My moto defy is on it right now.
I downloaded network setting app and i do not see how to change the settings.
How can I get this Atrix HD to force 3G on t-mobile/ptel?
Do I need to root?
I use this app called Phone Info that has been removed from Google Play (it was actually only renamed, it can still be found at https://play.google.com/store/apps/details?id=myc.phone.PhoneInfo with a title in Chinese). I get 3G when I select WCDMA only.
videocard said:
I want to select network and choose 3G for tmobile/ptel. It works great on my defy.
I am out on the edge of town where 2g and 4g reception are weak but 3g is great. Sadly the phone always either chooses 2g or 4g and is having problems getting a signal out here.
I know for a fact I have tmo/ptel 3g here. My moto defy is on it right now.
I downloaded network setting app and i do not see how to change the settings.
How can I get this Atrix HD to force 3G on t-mobile/ptel?
Do I need to root?
Click to expand...
Click to collapse
Tmobile's "3G" and "4G" are the same, or are you referring to LTE? Look in your About Phone, what type of data connection does it say you're getting while idle and using data?
Depending what ROM you have many of the ROMs you can enable toggles for the desire network
Sent from my Atrix HD using Carbon rom and XDA 4 Premium
If you use the hidden menus you can force it to stay 3g.
Sent from Moto Atrix HD Maxx Probam edition
I saw a few screenshots of people's Moto X's from sprint with a bunch of options under Network Mode. I have the XT1053 (TMO unlocked, on ATT network) and the only options I see are "Auto" and "2G."
I browsed around and found that there's an LTE OnOff app, but I'm just wondering if there's a way I can get those options for 3G on my device's Network Mode option list?
The reason why I even care is because for some reason at my workplace, I can't seem to get any data through LTE. My signal will display 3 bars of LTE, but it absolutely does not work. While it will turn off LTE and just say 4G since it's on auto, I find that a majority of my day, it WON'T switch. It stays on 4G LTE 99% of the time and does not function at all. When I walk outside the building, LTE works perfectly fine. Would I be right to assume that the auto mode is literally on borderline between switching, so it never establishes a stable connection?
I guess it brings me to the question, is the Auto mode inefficient / will I have to live with manually turning off LTE every time I get to work? :/
noc215 said:
I saw a few screenshots of people's Moto X's from sprint with a bunch of options under Network Mode. I have the XT1053 (TMO unlocked, on ATT network) and the only options I see are "Auto" and "2G."
I browsed around and found that there's an LTE OnOff app, but I'm just wondering if there's a way I can get those options for 3G on my device's Network Mode option list?
The reason why I even care is because for some reason at my workplace, I can't seem to get any data through LTE. My signal will display 3 bars of LTE, but it absolutely does not work. While it will turn off LTE and just say 4G since it's on auto, I find that a majority of my day, it WON'T switch. It stays on 4G LTE 99% of the time and does not function at all. When I walk outside the building, LTE works perfectly fine. Would I be right to assume that the auto mode is literally on borderline between switching, so it never establishes a stable connection?
I guess it brings me to the question, is the Auto mode inefficient / will I have to live with manually turning off LTE every time I get to work? :/
Click to expand...
Click to collapse
3 bars of LTE is an excellent signal. With 1 bar of signal I can still get 15mbps down from my provider. If your phone is detecting such a strong received signal it won't be switching back to HSPA on its own. For some reason the building you're in may block the phones transmitted signal more then it blocks the signal from the cell site. I am guessing you're on band 4 LTE which has quite the frequency difference between uplink and downlink. Your only option(assuming the phone or cell site isn't defective) is to manually switch to WCDMA with a third party app such as the "LTE setting" app in the Play store. Or unlock your bootloader and flash firmware from another provider that has more options. I know the Rogers Canada firmware has an LTE on/off option, it also has a 2G only option. Sadly Rogers has not yet approved the release of 4.4 (kitkat).
Steve-x said:
3 bars of LTE is an excellent signal. With 1 bar of signal I can still get 15mbps down from my provider. If your phone is detecting such a strong received signal it won't be switching back to HSPA on its own. For some reason the building you're in may block the phones transmitted signal more then it blocks the signal from the cell site. I am guessing you're on band 4 LTE which has quite the frequency difference between uplink and downlink. Your only option(assuming the phone or cell site isn't defective) is to manually switch to WCDMA with a third party app such as the "LTE setting" app in the Play store. Or unlock your bootloader and flash firmware from another provider that has more options. I know the Rogers Canada firmware has an LTE on/off option, it also has a 2G only option. Sadly Rogers has not yet approved the release of 4.4 (kitkat).
Click to expand...
Click to collapse
That makes a lot more sense to me now. So basically the "Auto" mode only considers my reception and not transmittance strength, so it never saw a need to switch me off LTE. I am almost sure it is not my phone because I started experiencing a signal loss issue with my S3 a few days ago. I doubt it's the cell site because as soon as I step out of the building, LTE works with no problems.
I did ended up using LTE OnOff to force CDMA and I can actually do stuff now. I went and did a speedtest ...
Ping: 114 ms
Down: 4.06 Mbps
Up: 0.77 Mbps
I guess with the lack of options, I have yet another reason to roll up the sleeves and get my hands dirty. Haven't touched ABD since I had a samsung captivate!
Thank you
PagePlus does not activate an LTE phone on their "low-end" plan but allows a modified LTE phone to be activated. I used an app to make it CDMA only but PagePlus still cannot activate it saying it has some issues because their system still thinks it is LTE. I wonder if I have to something special on the phone.
I unlocked fast boot. The phone is not yet rooted.
Any help is appreciated.
Network connections? Set preffered to 3G/2G.
@kyzn is right with going to Settings > More > Cellular networks > Preferred network type and selecting 3g. This does not mean it will be in 3g only because 2g is there for a backup network signal in case that the 3g or higher signal is lost. Shouldn't be problem for you with what you are asking.
If you would like a little more info here is a link to the similar OP
http://forum.xda-developers.com/showthread.php?t=2602681
Grab this app, it'll take you to a menu which lets you select the mode you want.
https://play.google.com/store/apps/details?id=com.tapbase.LTEswitcher