V!sk Kernel for Xperia TX
Power by EXR Team
--------introduce------
Hi friends, First,Sorry for my bad English.
I compile this kernel for Xperia TX,And i want to share it here,
Hope you like this work my friends:victory:
--------Feaeurts------
compile form 9.1.B.1.67 sources
startup script (init.d) support!
TWRP 2.5.0.0(VOL- button to setup)
CWM 6.0.3.7(VOL+ button to setup) (I build this Recovery from the newly CM10.2 sources)
CPU bootup at 384Mhz to 1512Mhz
CPU overclock upto 1809Mhz!
smooth scaling along CPU frequency table
192MHz lower cpu frequency bin
kernel level Sound Contro(v2.1)
added intelli_plug (v1.6) kernel level multi-core controller (replacement for mpdecision)
with ECO-Mode!eco-mode disables one cores(On TX) and work with one core! hence giving better battery life when performance is not required!
I include the scripts to Contor eco mode and intelli_plug, After you flash my kernel,you can see the folder named "Visk_ECO_Ctrl" in the root dir (/ ),and there are 4 .sh scripts can be use to contor this mode.
Cortex-A15 optimizations for compiling
USB force FastCharge(allow users to force USB charging at 1000mA)
MSM CPU Freq Limiter
lowered CPU undervolt voltage to 700mV
CPU governors:
msm-dcvs
intellidemand
interactive
ondemand
wheatly
performance
I/O schedulers:
sio
noop
deadline
cfq
screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
disclaimer
OVERCLOCKING CAN BE DANGEROUS! U RISK THE HARDWARE GETTING DAMAGED!
PROCEED WITH CAUTION! U HAVE BEEN WARNED!
I AM NOT TO BE HELD RESPONSIBLE IF U DAMAGE UR PHONE / SPILL UR COFFEE / MISS UR ALARMS / ANY OTHER CALAMITY/MISHAP
DO NOT CROSS FLASH! THIS IS MENT ONLY FOR Xperia TX (LT29i)
credits for features
FreeXperia Team - for many thing...
DooMLoRD - for many things too (A huge Thank,Your work is very very great bro)
Faux123 - for kernel level Sound Control GPL sources,and intellidemand CPU governors also the intelli_plug (Thank's a lot bro!!!)
TeamWin - for TWRP
FranciscoFranco - for Cortex-A15 optimizations
mathkid95 - for the SIO Scheduler
FranciscoFranco, motley-git, Chad Frobel - for the USB force FastCharge interface
Ezekeel - for Wheatley CPU Governor
THANK YOU GUYS FOR YOUR AWESOME WORK!!
requirements
Xperia TX(LT29i)
FW - 9.1.B.1.67
bootloader unlocked
working fastboot
how to install my kernel
You can install it with CWM
And you can install it with the work fastboot
Code:
fastboot flash boot kernel.elf
Code:
fastboot reboot
The detail about how to install kernel please see DooMLoRD'S post{[KERNEL][Z] DooMKernel {JB}(v14)[20130906]}
Remember the Xperia TX kernel named "kernel.elf" not boot.img
Sources in my github:
https://github.com/V1sk/android_kernel_sony_msm8960
Download:
V!sk-02
Works fine with my TX now=)
Sent from my LT29i using xda app-developers app
Thank you bro : )
Sent from my C6603 using xda app-developers app
Xperia-Lover said:
V!sk Kernel for Xperia TX]
I was waiting from a long time for a kernel for my TX under B.1.67 SW. Finally it arrived, thanks to you!. I have tested your kernel with Timin8 for B.1.67 rooted deodexed rom in the last 9 hours and everything works O.K.
-Boot: O.K, with the last TWRP and CWM
-Touchscreen: O.K. Vibrator: O.K. Display: O.K. Hardware keys: O.K.
-GPS: O.K. WiFi: O.K. Front and rear camera: O.K Sensors: O.K
-GSM: O.K. Connectivity with PC: O.K. Charging: O.K.
So, everything works O.K, without any problems, and I wanna thank you, bro, thousand times!
In the next few hours I will test some benchmarks and I will tell you the results!
Thanks once again and I hope you will continue your work for the Xperia TX community!!!
Click to expand...
Click to collapse
Thank you for do so much test bro!!! I will continue my works!
Sent from my C6603 using xda app-developers app
Very thanks ! Works
Sent from my Xperia TX using XDA Premium 4 mobile app
Xperia-Lover said:
V!sk Kernel for Xperia TX
Power by EXR Team
Click to expand...
Click to collapse
Hi, Xperia-Lover,
Now is 36 hours from when I've installed your Kernel under Timin8R rooted deodexed ROM. Everything works OK. No SOD, no blockage etc.
I have tested with a lot of tests (vellamo, antutu, quadrant, gpu benchmark, smartbench, starling benchmark, etc). The results are a little better under 1512 MHz than the stock B.1.67 kernel at the same frequence. For example I obtained 6069 under Quadrant Professional 2.1.1 (compared with 5850 under stock B.1.67 Kernel), also I obtained 16699 with Antutu 4.0.1 (compared with 16200 under stock kernel). So, results are good, (maybe the device couldn't more).
But, impressive is the stability at 1,8 GHz, for hours. Conclusion: your kernel is stable, very useful, good for dayly work. :good:
Congratulations and many thanks for your work!
I'm testing. Thank for your work.
Thank you very much bro!!! I will add more feature for my kernel in coming, And your test work are great!:thumbup:
Sent from my C6603 using xda app-developers app
Working fine, no error. Maybe sony's kernel is very good so I can't feel different between two kernel.
Anyone, can you provide some compatible rom (rooted, deodexed)? thanks
womanizerzz said:
Anyone, can you provide some compatible rom (rooted, deodexed)? thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=44351297
http://www.androidfilehost.com/?fid=23060877489998414
Taejilovely said:
Working fine, no error. Maybe sony's kernel is very good so I can't feel different between two kernel.
Click to expand...
Click to collapse
The most important for Xperia-Lover's kernel is not the increased (a little) of performance, but rooting, the last TWRP and CWM (with all their facilities) and of course, the stability, even at overclocking. And, at this moment, it is the only custom kernel for Xperia TX, 9.1.B.1.67 FW.
Xperia-Lover said:
Thank you very much bro!!! I will add more feature for my kernel in coming, And your test work are great!:thumbup:
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
You can port touch 2 times on screen to wake up screen from N7?
Bro did you have random reboot problem?
After updating jellybean that problem makes me angry
I had searched this problem and i find who had the same problem
Please help me
Sorry for english
Sent from my LT29i using xda app-developers app
sinnadla said:
Bro did you have random reboot problem?
After updating jellybean that problem makes me angry
I had searched this problem and i find who had the same problem
Please help me
Sorry for english
Sent from my LT29i using xda app-developers app
Click to expand...
Click to collapse
Go to Mount and Storage , on Mount system press power button (it will show unmount system then), Go Back and Install Zip from SD card , please locate 167Rootfix.zip
After finished install, go back to main menu and Reboot.
You can try it.
undervolting not work
Taejilovely said:
Go to Mount and Storage , on Mount system press power button (it will show unmount system then), Go Back and Install Zip from SD card , please locate 167Rootfix.zip
After finished install, go back to main menu and Reboot.
You can try it.
Click to expand...
Click to collapse
Thank u for answer me.
But bro, i wonder what is problem and why it occurs in jellybean not in ics?
Also i wonder u had the same problem and how did u know how to solve it?
Could u explain 'why this problem occurs' detailed?
Thx for all of your help
Sorry for english
Sent from my LT29i using xda app-developers app
YongJeah said:
undervolting not work
Click to expand...
Click to collapse
I think just like Doom's kernel, you need to edit the 99vdd file in ini.d folder. Follow Doom's instruction in his thread.
Sent from my LT29i using xda premium
sinnadla said:
Thank u for answer me.
But bro, i wonder what is problem and why it occurs in jellybean not in ics?
Also i wonder u had the same problem and how did u know how to solve it?
Could u explain 'why this problem occurs' detailed?
Thx for all of your help
Sorry for english
Sent from my LT29i using xda app-developers app
Click to expand...
Click to collapse
Because i think your problem like my problem. When i rooted phone by doomlord tool kit and intervention in the system, it automatically reboot. Ex: edit build.prop, delete app system, play game a long time. I think my problem is tool root so I've found other tool root and it's working perfect.
You can try it http://forum.xda-developers.com/showthread.php?t=2334552.
I don't know why, maybe you should ask the developers ^___^.
Thanks for listen to me.
Related
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to use these modifications upon your own choice, and if
* you point the finger at me for messing up your device, I'll just sit and laugh at you.
*/
Features
-Enable RLE ( SplashFace)
-NO OC ( why to keep the battery nice and clean )
-Governors
brazzilianwax
lagfree
smartass
scary
savadedZen
InteractiveX
Interactive
conservative
intellidemand
ondemand
Lionheart
smartassv2
performance
-CPU Levels
122 MHZ
200 MHZ
245 MHZ
320 MHZ
480 MHZ
540 MHZ
614 MHZ
672 MHZ
729 MHZ
768 MHZ
780 MHZ
800 MHZ
-Triple buffer for framebuffer
-enabled cleancache and frontswap
- more ram from logger
- memory tweaks
- Call recording
- Updated Netfilter
- and multiple more
Sources
My sources- https://github.com/spacecaker/CM7_Space_Kernel_Cooper
Downloads
http://www.mediafire.com/?2vk1v9dub7d4d0c V1
http://www.mediafire.com/?q03s2zrssab6asg V2
Screenshoots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: the kernel is NOT 3.0 its moddified 2.6.35.14
Credits
Teamhacksung
nobodyatall
skynet28 - for some very helpfull governors and sio files
Dragonn - for a better compile script
Ketut kumayaya - for blackhawktools ( included insource )
How to install?
Instal CM7 ( GB2.3.7/8)based rom
Download my spacekernel.zip
Put the zip on the root of sdcard
Go to cwm recovery
Press install zip from sdcard
Select the zip
Let it install and
Reboot
ChangeLog
Code:
V1
- Initial Release
- Deleted OC options
- fix compile tool
- use GCC not linaro ( didnt boot when i tried linaro but that could be because its for armv7 )
- merge Governors of Skynet
V2
- Second release
- Trimmed CPU freq to bit lower / usefull volumes
- claim more ram from loggers
- Memory Tweaks * thanks NaA*
V3
- Third release
Firsties !
Awesome Space you got it released!
I couldn't get it to build lol.
Re: [DEV]]KERNEL][W.I.P] SpaceKernel CM7
PulseDroid said:
Firsties !
Awesome Space you got it released!
I couldn't get it to build lol.
Click to expand...
Click to collapse
Tell me ur error xD
I will fix as i did modify the compile script a lot
Sent from my ST25i using xda app-developers app
SpaceCaker said:
Tell me ur error xD
I will fix as i did modify the compile script a lot
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
Nope it's okay, I mean here it is I don't need to compile it
Please check my Logcat of CM Mini uppyDogEyes:
I will try with last lewa os rom
When I saw kernel 3 was going to explode but then I saw the note below
Re: [DEV]]KERNEL][W.I.P] SpaceKernel CM7
Mm7 said:
When I saw kernel 3 was going to explode but then I saw the note below
Click to expand...
Click to collapse
Yeah
I was doing some edits
And compiled
After that but then it was 2.6.35.14
And thought oh my edit didnt worked so next day i fixed some parts and compiled again and it was changed
Sent from my ST25i using xda app-developers app
Wow !! Awesome job Space ! I noticed a difference as soon as my Ace finished booting up. Way smoother and faster. Sweet
hooked_on_droid said:
Wow !! Awesome job Space ! I noticed a difference as soon as my Ace finished booting up. Way smoother and faster. Sweet
Click to expand...
Click to collapse
i am still working on the kernel but also CSM7.2
kernel will have some updates offcourse
Can you create an version with overclock option pleaseeeee?
update comming soon
Sent from my S500 using xda app-developers app
Kernel Updated
me frustrated thanks to my fabulous wifi =_=
damn thing doesnt load xda properly or any other sites
so
i think i migth keep from the web for a short time till my net works properly again
good bye guys
SpaceCaker said:
Kernel Updated
me frustrated thanks to my fabulous wifi =_=
damn thing doesnt load xda properly or any other sites
so
i think i migth keep from the web for a short time till my net works properly again
good bye guys
Click to expand...
Click to collapse
if possible could someone sent me the about phone / kernel version screenshoot ?
thank u :3
Sent from my S500 using xda app-developers app
Just asking, did you build it purely from source or used some kernels like fire kernel to build for example ? I'm keen to know. Because I absolutely love dragonn's fire kernel. And if you've used this as a base, I'm sure that your tweaks would have made it very better. And how do you think is the kernel's performance as compared to that of fire kernel ? Eager to try this.
Sent from my GT-S5830 using xda premium
Venomous Viper 119 said:
Just asking, did you build it purely from source or used some kernels like fire kernel to build for example ? I'm keen to know. Because I absolutely love dragonn's fire kernel. And if you've used this as a base, I'm sure that your tweaks would have made it very better. And how do you think is the kernel's performance as compared to that of fire kernel ? Eager to try this.
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
ive based it on cm7.2 kernel(teamhacksung) and merged some commits + added some myself
and for source u can see my github
i couldnt add more / change more as everything is like almost in every kernel already :/
thats why i didnt ad oc
Sent from my S500 using xda app-developers app
SpaceCaker said:
ive based it on cm7.2 kernel(teamhacksung) and merged some commits + added some myself
and for source u can see my github
i couldnt add more / change more as everything is like almost in every kernel already :/
thats why i didnt ad oc
Sent from my S500 using xda app-developers app
Click to expand...
Click to collapse
about performance i currently dont know
dont use ace
its laying somewhere
Is SU included in kernel ?
Cryss said:
Is SU included in kernel ?
Click to expand...
Click to collapse
think none
or it was superuser
Sent from my S500 using xda app-developers app
SpaceCaker said:
think none
or it was superuser
Sent from my S500 using xda app-developers app
Click to expand...
Click to collapse
Is best if not ... but thanx for answer
STOP PRESS: STILL UNDER DEVELOPMENT GALAXY TAB 2 DUAL BOOT PROJECT
Click to expand...
Click to collapse
Only for cm-10.1-20130217-NIGHTLY or newer and stock JB ROM 4.1.1 (untested) and 4.1.2
Click to expand...
Click to collapse
This is [BOOT IMAGE][GT-P31XX] KK-Boot - Custom boot image for stock 4.1.1/4.1.2 ROM and [KERNEL][GT-P31XX][JB][4.2.2]CyanogenMod 10.1 unofficial kernel 3.0.31 combination, plus cm-10.1-blackhawk commit on github:
Remove Samsung debugging code in ext4 filesystem, inline with omapzoom
Initializing Android USB depending on the rom type, big thanks to gokhanmoral. This is the key of single kernel. Multiboot support not so far, you can reuse my kernel for multiboot (if you can)
Compiler optimizations
Kernel without CGROUPS support
Using SLQB memory allocator
Decrease MPU, IVA, and GPU voltage
Adapt and fix codeworkx's sysfs for controlling pivot mode. This is the key of landscape kernel
Stop the spam from audio driver
An exprimental config, remove a lot of debugging config from kernel: 775MB RAM
Stock JB 4.1.1/4.1.2 ROM: Using a slim version of busybox (from gokhanmoral's ramfs for siyahkernel-sgs3), bash and nano binary, sysrw and sysro script removed. GPU clock @ 384MHz + 2D GPU rendering, stock ROM really need an overclocked GPU.
CM/CM based ROM: As usual, change ro.sf.hwrotation value from 270 to 0 in /system/build.prop will transform your device to landscape mode, a workaround fix for boot animation graphic glitch. GPU clock @ 307MHz + 2D GPU rendering + 16bit transparency + disabled dithering + purging assets allowed
/system/etc/init.post_boot.sh is yours kernel tuning template. But remember, do not force your system too much until you are sure that your device is able to handle it.
Flash this using the latest CWM, CWM Touch, Philz Touch, or TWRP at your own risk!
Sir u r totally awesome.. Jus one word for u.. Waaoo.. The quality of work u have.. Jus incredible.. Please accept my honour.. God bless u :thumbup:
Thanks & Regards
Vishesh
Sent from my GT-P3100 using xda premium
I m pretty sure that its going work on pac rom as well as slim rom.thanks a million ketut sir
drsiddique5700 said:
I m pretty sure that its going work on pac rom as well as slim rom.thanks a million ketut sir
Click to expand...
Click to collapse
Yes Bro it will surely work..
Thanks & Regards
Vishesh
Sent from my GT-P3100 using xda premium
ketut.kumajaya said:
An exprimental config, remove a lot of debugging config from kernel: 775MB RAM
Click to expand...
Click to collapse
But this tab doesn't have 1GB of RAM? Or we only see this because Android reserve a few RAM to internal use?
Anyway, amazing work, as always. Will try it now! Thank you!
Wondering if this will work with Sungsonic HD V2 ROM???
jazzespresso said:
Wondering if this will work with Sungsonic HD V2 ROM???
Click to expand...
Click to collapse
Bro as described by ketut clearly.. It will work with stock as well cm based rom, as sungsonic is based on stock.. It will surely work.. Try it.. M also gonna flash it with pac rom very soon
Thanks & Regards
Vishesh
Sent from my GT-P3100 using xda premium
Renan Lazarotto said:
But this tab doesn't have 1GB of RAM? Or we only see this because Android reserve a few RAM to internal use?
Anyway, amazing work, as always. Will try it now! Thank you!
Click to expand...
Click to collapse
Yeah, android reserve RAM for itself, driver and co. Its the same thing with internal storage, i mean, when you have a 8 GB Tab than you have only 4,5 GB for yourself, the rest is for the system.
god_creature said:
Yes Bro it will surely work..
Thanks & Regards
Vishesh
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
Yeah, works on Slim.
Thx I want to try this kernel for Slim rom 4.2.2 ,I and how must I change the value for rotation.
where can I find this on mine rom when I have instald this Kernel ``ro.sf.hwrotation``
CM/CM based ROM: As usual, change ro.sf.hwrotation value from 270 to 0 will transform your device to landscape mode, fix boot animation graphic glitch.
Thx
On /system you find a file called "build.prop" there you must change this things.
smartidoos said:
Thx I want to try this kernel for Slim rom 4.2.2 ,I and how must I change the value for rotation.
where can I find this on mine rom when I have instald this Kernel ``ro.sf.hwrotation``
CM/CM based ROM: As usual, change ro.sf.hwrotation value from 270 to 0 will transform your device to landscape mode, fix boot animation graphic glitch.
Thx
Click to expand...
Click to collapse
After installing such kernel.. Open any root explorer.. Go to system.. Change the permission.. There is a file with name BUILD.PROP.. open it in text editor and accordingly make changes..
Thanks & Regards
Vishesh
Sent from my GT-P3100 using xda premium
---------- Post added at 08:47 PM ---------- Previous post was at 08:37 PM ----------
Jus flash this kernel in my pac rom, Wat to say.. It's totally awesome.. I can feel the smoothness in rom, gpu value set to default which means no overheating.. Fab work ketut sir.. Love u.. Superb :thumbup:
Thanks & Regards
Vishesh
Sent from my GT-P3100 using xda premium
OK guyz tested on slim from and it works very smooth.played temple run 2 and it lags to very negotiable extend.tablet doesn't gets heated.gonna try battery life.once again thanks ketut sir
god_creature said:
Bro as described by ketut clearly.. It will work with stock as well cm based rom, as sungsonic is based on stock.. It will surely work.. Try it.. M also gonna flash it with pac rom very soon
Thanks & Regards
Vishesh
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
yes I know that sungsonic is based on stock ROM, but developer modified, so I was not sure if flashing this kernel will break other stuff in sungsonic ROM. that's why I asked
Dexxmor said:
On /system you find a file called "build.prop" there you must change this things.
Click to expand...
Click to collapse
Thx ,trying now
---------- Post added at 07:20 PM ---------- Previous post was at 06:53 PM ----------
Dexxmor said:
On /system you find a file called "build.prop" there you must change this things.
Click to expand...
Click to collapse
Perfect,thx it works:good:
I tried It with PSN>> Stock Rom >> and it's running good for now ... keep the good works
My feedback:
ROM is running smoother now, I'm using CyanogenMod 10.1, 22/04 nightly. All animations seems to be a lot smoother, powering the screen and turning it off feels a bit more responsive now, aswell touchscreen. Can't say about battery life because haven't used the tab a lot, but I can imagine that is better than never.
Thanks Ketut! Awesome work, as always!
Awesome! Only tested on Slim so far but it is working great here!
I never tried Cubic traffic control before, and now I am wondering why not. What an improvement over Westwood, at least in browsing around these forums!
Great job ketut.kumajaya! Thanks.
P.S. I have always hoped that you named your kernel Blackhawk because you are a fan of the hockey team the Chicago Blackhawks like me!:laugh: Either way you're still a good man!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Go Hawks!
Thank you ketut. You are the best.
Damn it I really wish I could try it.
Anyways... this should keep the noobs trying kk-boot on cm and vice versa.
ground- breaking work ketut !!
nice way to bring the community together :good:
may i recommend your name to other kernel devs plz ? there are others who have the same cause- one universal language :fingers-crossed:
@Caldair Hockey is not popular in my country, but I really like the logo.
Go Hawks!
Hello everybody. Dear jeroenqui (author of meow-kernel) can make port his kernel for Sony Xperia ZR but he doesn't think that we need in this kernel. Please everybody write in this thread who want this kernel, who will donate for it and who will test and use meow kernel.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THIS IS FOR UNLOCKED BOOTLOADER ONLY!!!
FEATURES:
All the functionality of the great CM/FXP kernel! Thanks a lot to them, who made this all possible!
Includes TWRP 2.6.3.0 recovery
Updated GAMMA settings for the screen for more realistic colours
Sweep 2 Wake
Doubletap 2 Wake
Proper and stable CPU overclocking upto 1836 MHz
Proper and stable GPU overclocking upto 627 MHz
CPU & GPU voltage control
Undervolt for better battery life
Intelli thermal module to prevent heat of device
Hotplug msm_mpdecision
Extra CPU governors: wheatly and intellidemand
Extra GPU governor: simple
Extra I/O scheduler: row
Fast charging
Fast charging for unkown (cheaper) chargers
Faux Sound 3.0 support
More smoothness by misc. tweaks
COMPATIBILITY:
This kernel is currently compatible with the following 4.3 ROMS
CM 10.2
All ROM's that are based on CM10.2
This kernel is currently compatible with the following 4.4 ROMS
Beanstalk (confirmed, bug with gsm signal)
Cyanfox(confirmed)
All ROM's that are based on CM11
DOWNLOAD: The fist version: MEOW-kernel.v2.01.24-kitkat-dogo.zip :victory: :good::good::good:
Big thanks to jeroenqui for creating kernel for Sony Xperia ZR.
INSTALLATION:1. Reboot phone to recovery
2. Flash the .zip from your sdcard ( after I recommend wipe cache)
3. Reboot and wait (lading is very slow.)
4. Enjoy
nikhil18 said:
By this kernel we can increase Mic gain in 4.4 Rom so volume in video recording can be increased and overclocking on stock Rom is a pain in a** because of many thermal protections but in cm Rom there are less so we can bring out the real power of this chipset with this kernel an on cm roms the battery life is way better than stock Rom and with this kernel we can undervolt which will increase the battery life and in future we may not get official 4.4 so after this long speech you all will know why this kernel is needed for our device
Sent from my C5502 using XDA Premium HD app
Click to expand...
Click to collapse
Original thread for xperia Z: http://forum.xda-developers.com/showthread.php?t=2448130
kostazol said:
Hello everybody. Dear jeroenqui (author of meow-kernel) can make port his kernel for Sony Xperia ZR but he doesn't think that we need in this kernel. Please everybody write in this thread who want this kernel, who will donate for it and who will test and use meow kernel.
Click to expand...
Click to collapse
What improvements bring this kernel? share some details and the we consider to donate..
adryanodej said:
What improvements bring this kernel? share some details and the we consider to donate..
Click to expand...
Click to collapse
I added some details in first message.
kostazol said:
I added some details in first message.
Click to expand...
Click to collapse
sorry , think my phone skiped first post )) so, wohoo lot of interesting improvemets .. so works only with cm based roms? how about stock 4.3
adryanodej said:
sorry , think my phone skiped first post )) so, wohoo lot of interesting improvemets .. so works only with cm based roms? how about stock 4.3
Click to expand...
Click to collapse
Yes, It work only with CM and AOKP roms. DoomLorD's kernel work with stock, but roms which based on CM11 and AOKP are interesting.
kostazol said:
Yes, It work only with CM and AOKP roms. DoomLorD's kernel work with stock, but roms which based on CM11 and AOKP are interesting.
Click to expand...
Click to collapse
it will be nice to have such a kernel on a stock rom i don`t use cm yet cuz in recording the volume is too low ... and the photos i take don`t see on full screen .. tha`t very annoying for me .. anyway if i move again on CM I would definitely such a kernel !
Sorry for my english
By this kernel we can increase Mic gain in 4.4 Rom so volume in video recording can be increased and overclocking on stock Rom is a pain in a** because of many thermal protections but in cm Rom there are less so we can bring out the real power of this chipset with this kernel an on cm roms the battery life is way better than stock Rom and with this kernel we can undervolt which will increase the battery life and in future we may not get official 4.4 so after this long speech you all will know why this kernel is needed for our device
Sent from my C5502 using XDA Premium HD app
I'm interested to see this kernel for ZR
Sent from my Xperia ZR using Tapatalk
So OP will sir jeroenqui make this kernel for our device
Sent from my C5502 using XDA Premium HD app
Hehe, @kostazol nice one
I already told you I will try to make a port of MEOW for this device.
Although, I don't want you to raise donations before I start working on it.
Donating is ALWAYS optional and only a sign of appreciation about the work that was done.
Also, this does not increase my motivation in any way. It's more of a time issue.
I will try to release a test build in the coming week. Please stay tuned and have some patience.
Thanks
nikhil18 said:
By this kernel we can increase Mic gain in 4.4 Rom so volume in video recording can be increased
Click to expand...
Click to collapse
cooooooooooooooooooooooooooooooooool if true.
don't understand why xperia custom development like tribal pattern, good things don't get submitted to the official repo.
why?????
---------- Post added at 02:33 PM ---------- Previous post was at 02:06 PM ----------
btw, can he backport f2fs, fix the sim and breathing light as well?
Ok, I made a first attempt to port it.
Please test:
https://drive.google.com/file/d/0B0sY8nIwzcLrMk5scWpZRXlNQUU/edit?usp=sharing
Requirements:
Ofcourse, unlocked bootloader
A CM11/AOSP 4.4 based KITKAT ROM (NOT FOR STOCK ROMS)
Install:
Flash the .zip from your recovery
Reboot
Notes:
This is the first version, altough it should work fine, don't expect it to work very stable.
This will replace your recovery with the newest TWRP
Please report the first findings here. When it's graduated I will make a seperate thread for it in the development section.
jeroenqui said:
Ok, I made a first attempt to port it.
Please test:
https://drive.google.com/file/d/0B0sY8nIwzcLrMk5scWpZRXlNQUU/edit?usp=sharing
Requirements:
Ofcourse, unlocked bootloader
A CM11/AOSP 4.4 based KITKAT ROM (NOT FOR STOCK ROMS)
Click to expand...
Click to collapse
Does this kernel have doubleTap2Wake and Sweep2Wake ?
Big thanks for you. It works on cm11(fxp), beanstalk and cyanfox.
After 5 attempts beanstalk work.
Bugs:
kernel has very low speed before loading bacause of it i can't use recovery. Recovery loading 5 minutes and after it i have freezes in recovery.
TWRP has resoltion 1920x1080, but display of ZR has resolution 1280x720 because of it we can use this TWRP(many buttons located outside the screen)
loading on cm11 and beanstalk more than 2 minutes. ( it is normal?). It start with freezes(on animation logo) after freezes leave me.
It work with cyanfox but it start more than cm11 and beanstalk.(it takes 10 minutes in the fist boot, after 1-2 minutes)
CPU frequency does not increase more than 1134mhz in interactive
CPU frequency does not increase more than 1134mhz even if I put min and max as 1728mhz and the recovery is working I use a theme for twrp because it is not resized but it is too slow it hangs a lot but flashing is fine and booting time is too much and fauxsound is working great and no option for changing GPU governor
Sent from my C5503 using XDA Premium HD app
On test !!!
First reboot home freeze, nothing work
Second reboot....waiting...waiting...and more waiting....and.....FIRST SONY FREEZE, NOTHING WORK !!!
HEY man did you test yourself before upload ????
We have ZR not Z
juanenbas said:
On test !!!
First reboot home freeze, nothing work
Second reboot....waiting...waiting...and more waiting....and.....FIRST SONY FREEZE, NOTHING WORK !!!
HEY man did you test yourself before upload ????
We have ZR not Z
Click to expand...
Click to collapse
He can't test it because he have xperia Z.
Please try it:
You need wipe cache after install, also unplug usb, and wait 10-15 minutes(the fist loading). I don't know why but while it boot it has freezes and it doesn't have freezes after loading. Other loading needs about 2-4 minutes
juanenbas said:
On test !!!
First reboot home freeze, nothing work
Second reboot....waiting...waiting...and more waiting....and.....FIRST SONY FREEZE, NOTHING WORK !!!
HEY man did you test yourself before upload ????
We have ZR not Z
Click to expand...
Click to collapse
Hey if you don't want to test it don't come here and argue, or expect anything bad happening at your phone at your fault!
at least he made a build for us!
Is any one else having the problem of CPU frequency not going more than 1134mhz and there is no intelliplug option
Sent from my C5503 using XDA Premium HD app
nikhil18 said:
Is any one else having the problem of CPU frequency not going more than 1134mhz and there is no intelliplug option
Sent from my C5503 using XDA Premium HD app
Click to expand...
Click to collapse
I also have this problem, and i think starting frequency is low, because of it we have freezes during loading.
Aight, as I expected it has some problems, but at least it boots and basic features work. Will do my best to solve some of the problems in the coming week. Please keep reporting the problems here. The next version will be released in a new thread in the development section. When it's the time, I'll announce that here as well.
Sent from my Xperia Z1 using Tapatalk
THIS IS FOR UNLOCKED BOOTLOADER ONLY!!!
Credits
@FXP @Kali- @codeworkx @binary for all the work on the hardware bringup for yuga
@cdesai @Entropy512 @championswimmer for their work on the device tree
FreeXperia team
CyanogenMod team
TWRP team
@faux123 for using a lot of his features
@DooMLoRD for using some of his sources.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FEATURES:
All the functionality of the great CM/FXP kernel! Thanks a lot to them, who made this all possible!
Includes TWRP recovery
Updated GAMMA settings for the screen for more realistic colours
Sweep 2 Wake
Doubletap 2 Wake
Proper and stable CPU overclocking upto 1836 MHz
Proper and stable GPU overclocking upto 627 MHz
CPU & GPU voltage control
Undervolt for better battery life
Intelli thermal module to prevent heat of device
Hotplug msm_mpdecision
Extra CPU governors: wheatly and intellidemand
Extra GPU governor: simple
Extra I/O scheduler: row
Fast charging
Fast charging for unkown (cheaper) chargers
Faux Sound 3.0 support
More smoothness by misc. tweaks
UPCOMING FEATURES:
Dual Recovery
Gamma control
..........
BOOTLOGO:
COMPATIBILITY:
This kernel is currently compatible with the following 4.4 ROMS
PAC-rom (recommended, confirmed)
Beanstalk (confirmed)
Omnirom (confirmed)
All ROM's that are based on CM11
DOWNLOAD:
http://forum.xda-developers.com/devdb/project/?id=2769#downloads
INSTALLATION:
1. Download the .zip and save it to your sdcard
2. Reboot phone to recovery
3. Flash the .zip from your sdcard
4. Laugh because of the installation images
5. Make loud MEOW sounds
6. Calm down your neighbourhood
4. Reboot and enjoy
if you like my stuff, you are welcome to donate a beer or a coffee via PayPal or Bank
SOURCES:
https://github.com/MEOW-kernel/android_kernel_sony_apq8064
XDA:DevDB Information
MEOW-kernel (For CM11-based ROMS), a Kernel for the Sony Xperia ZR
Contributors
jeroenqui
Kernel Special Features:
Version Information
Status: Testing
Created 2014-02-04
Last Updated 2014-02-04
Changelog
0204:
Initial version
Reserved
Status: first build is uploaded. Check the downloads tab.
akash4357 said:
I'm unable to boot using this Kernel on the latest CM11 Nightly. Can this be flashed on FXP's 10.2?
Click to expand...
Click to collapse
According to the OP, it's only compatible with cm11 for now.
Boot Issues!
I'm unable to boot using this Kernel on the latest CM11 Nightly. Can this be flashed on FXP's 10.2?
It work greatly with CyanFox(confirmed). New version doesn't work.((((crying: Dark screen and boot-loop. ( I made wipe cashe after installation.)
P.s. V3 work with cyanfox, but v4 doesn't work. We don't have OmniRom and PAC rom for Sony xperia ZR, but i hope to see it.
kostazol said:
It work greatly with CyanFox(confirmed).
P.s. We don't have OmniRom and PAC rom for Sony xperia ZR, but i hope to see it.
Click to expand...
Click to collapse
How long does it take to boot?
Sent from my Xperia ZR using Tapatalk
If it's slow after first boot, just give it some time.. It will be faster after some use.
If not, reboot it twice.
First boot might take up to 5 minutes
Can someone confirm if sweep2wake and dt2wake are working?
jeroenqui said:
If it's slow after first boot, just give it some time.. It will be faster after some use.
If not, reboot it twice.
First boot might take up to 5 minutes
Click to expand...
Click to collapse
Did reboot twice, Still unable to boot. Its been 15 min now.
Using Latest CM11 Nightly.
akash4357 said:
Did reboot twice, Still unable to boot. Its been 15 min now.
Using Latest CM11 Nightly.
Click to expand...
Click to collapse
I have boot-loop. it reboot every 1 minute.
Reboot more than twice and waited for more than 20 minutes. It just stays on Sony logo forever.
Sent from my Xperia ZR using Tapatalk
I do not get Sony logo phone restarts cm11
Sent from my C5503 using XDA Premium HD app
2nd mic works?
nostupidthing said:
2nd mic works?
Click to expand...
Click to collapse
Most people can't get it boot.
Sent from my Xperia ZR using Tapatalk
I am stuck on Bootloop as well :'( :'( . Screen gets turned on for some time, and then turns off. There is no display at all.
Was using Beanstalk ROM (cm-11 based).
@jeroenqui please help me here.
[Update : I can still get into fastboot mode. Anything that I can do from there?]
ayushag96 said:
I am stuck on Bootloop as well :'( :'( . Screen gets turned on for some time, and then turns off. There is no display at all.
Was using Beanstalk ROM (cm-11 based).
@jeroenqui please help me here.
[Update : I can still get into fastboot mode. Anything that I can do from there?]
Click to expand...
Click to collapse
You can try to flash stock kernel with flashtool so it boots again
Sent from my C5503 using xda premium
ayushag96 said:
I am stuck on Bootloop as well :'( :'( . Screen gets turned on for some time, and then turns off. There is no display at all.
Was using Beanstalk ROM (cm-11 based).
@jeroenqui please help me here.
[Update : I can still get into fastboot mode. Anything that I can do from there?]
Click to expand...
Click to collapse
You can download this file:
https://www.dropbox.com/s/t2pds6e00vfu534/aokp_cwm_touch.zip
and flash it in recovery. I pull the kernel and wifi driver files from AOKP rom and compiled this zip for my use in case of anything goes wrong in flashing stuff like kernel.
If you're using other rom (not aokp), you can open up my zip and pull the respective files from the rom.zip you are using and replace those files in my zip.
Or if you dont understand me, you can simply flash back your rom and your phone will be able to boot again.
IJskonijn22 said:
You can try to flash stock kernel with flashtool so it boots again
Sent from my C5503 using xda premium
Click to expand...
Click to collapse
Sent from my Xperia ZR using Tapatalk
wai10691 said:
You can download this file:
https://www.dropbox.com/s/t2pds6e00vfu534/aokp_cwm_touch.zip
and flash it in recovery. I pull the kernel and wifi driver files from AOKP rom and compiled this zip for my use in case of anything goes wrong in flashing stuff like kernel.
Click to expand...
Click to collapse
Thanks for the reply. I flashed the boot.img from the ROM's zip and then got into recovery and with a nandroid restore, so its good right now. However, I am very eager to try this kernel (once it gets fixed), mainly because of the overclocking part.
ayushag96 said:
Thanks for the reply. I flashed the boot.img from the ROM's zip and then got into recovery and with a nandroid restore, so its good right now. However, I am very eager to try this kernel (once it gets fixed), mainly because of the overclocking part.
Click to expand...
Click to collapse
Me too. Can't wait to see double tap to wake / slide to wake feature on my ZR.
Sent from my Xperia ZR using Tapatalk
error
not start the screen goes black and restarts continuously
Standard disclaimer:
Your warranty is now void. Use at your own risk.
In other words: It is your choice to use this software,
I am not responsible for any damage or problems!
Click to expand...
Click to collapse
Futures:
- under voltage support
- gamma control (to use it you need to run insmod /system/lib/modules/msm_kcal_ctrl.ko or add such file in init.d:
Code:
#!/system/bin/sh
insmod /system/lib/modules/msm_kcal_ctrl.ko
- sound control (faux code)
- gpu oc to 450Mhz
- gpu voltage control (you can access it via /sys/devices/system/cpu/cpufreq/vdd_table/gpu_mv_table default values are 945 mV, 1050 mV, 1150 mV to change the voltage run for example
Code:
echo "935 950 1150" > /sys/devices/system/cpu/cpufreq/vdd_table/gpu_mv_table
- cpuquiet for best cpu hotplug policy, I suggest to use load_stats for best balance between battery live and performance
- cpu governors (default preservative):
preservative for best battery live without losing any smoothies in system UI and ever day usage! http://forum.xda-developers.com/showpost.php?p=50173462&postcount=662
inteliactive for best performance
- LoUIS cache
- kernel runs in NEON mode
- optimized ARM RWSEM algorithm
- memutils optimization
- uksm - optimized RAM usage, using only a little bit of cpu power for that
- dynamic writeback - dynamically manage the dirty page writebacks with two different intervals, one when the screen is on and another when the screen is off. more info http://forum.xda-developers.com/showthread.php?p=42354290#post42354290
- interactive gpu governor
- Linaro and compile optimization -Ofast
- other small changes, to read in github commits
Big thanks goes to:
- rebelos for SlimKat (base source for this kernel)
- DooMLoRD, alnikki25k, jeroenqui, aidfarh for they kernel for yuga, often explored they repos for interesting things and changes
- faux123, ak and francisfranco for they kernel for other devices, I have taken much from they work
- And others with I not remember now!
-
FAQ:
- this kernel should run on most AOSP 4.4 based ROM's but I am testing it only on SlimKAT, report on with ROM's it works too
- for now no OC support - Z is fast enough phone, but is is getting hot on high usage and eats the battery fast so I don't think OC is really usefully
- on default settings you will got lower benchmark score in for example Antutu it got ~17k instant 20k - this is because we are using preservative cpu governor as default but since they are no lags in every day usage I don't care about it! Change to inteliactive if you want higher benchmark scores
Download
https://dl.dropboxusercontent.com/u/1664131/firekernel-yuga_v0.3.1beta.zip
https://dl.dropboxusercontent.com/u/1664131/firekernel-yuga_v0.3beta.zip
https://dl.dropboxusercontent.com/u/1664131/firekernel_yuga_v0.2beta.zip
Source
https://github.com/dragonnn/kernel_sony_apq8064
ROM's on they it doesn't work (for now, tested by other users):
- Vanir
- DU
- Pabx
- OmniROM
Changelog:
v0.3.1
- fixed wakeup gestures - now they should work
v0.3
- gpu voltage control
- force run all cores on one freq when user sets other min/max freq
- small gpu code cleanup form xzaosp
- gamma control
- true cd-rom emulation mode
- doubletap2wake and sweep2wake via generic sysfs files
- fixed wifi speed (I had some problem to get my full network speed on wifi)
XDA:DevDB Information
Firekernel for yuga, Kernel for the Sony Xperia Z
Contributors
dragonnn
Kernel Special Features: UV, dynamic fsync, dynamic writeback, UKSM, cpuquiet
Version Information
Status: Beta
Current Beta Version: v0.3
Beta Release Date: 2014-05-07
Created 2014-05-07
Last Updated 2014-05-14
OMG....downloading bro..
EDIT:- booted successfuly with AICP rom..no issues so far..good work bro
Sent from my Xperia Z using Tapatalk
Awesome !!!
Hey, you made my Day.
Downloading and testing on 4.4.2 slimkat weekly 4.9.
I will report back soon.
Best Regard's
Alex1911
MY configuration
Governor : Preservative
Scheduler: Fiops
Fsync : On
Cpu Quiet : load_stats
Mp decision : off
the only missing thing was Double tap to wake..but that's not an issue its running smoothly..:good::good::good::good::good::fingers-crossed:
Excellent, will give it a shot on Vanir 4.4.2.
EDIT:
Doesnt work with Vanir, get past boot logo, during boot animation, it then goes into a boot loop, without the kernel logo being displayed again, screen gets lit (although still black)and just loops on and off like this,
Cheers
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Xperia Z using Tapatalk
spida_singh said:
Excellent, will give it a shot on Vanir 4.4.2.
EDIT:
Doesnt work with Vanir, get past boot logo, during boot animation, it then goes into a boot loop, without the kernel logo being displayed again, screen gets lit (although still black)and just loops on and off like this,
Cheers
Click to expand...
Click to collapse
Does other kernels like MOEW works on it? Could you give me a logcat?
Wysłane z mojego C6603 przy użyciu Tapatalka
Very Nice. Tested on Pabx rom and it boots but serious issue when you hit the power button screen goes black but is still on Baseband unknown so wifi and cellular radio dont work
Techpenguin5 said:
Where did you find AICP rom for the yuga
Click to expand...
Click to collapse
http://dwnld.aicp-rom.com/
Sent from my Xperia Z using Tapatalk
That is exactly the best kernel, in my opinion.
Alex1911 said:
Hey, you made my Day.
Downloading and testing on 4.4.2 slimkat weekly 4.9.
I will report back soon.
Best Regard's
Alex1911
Click to expand...
Click to collapse
I tested it on SlimKat 4.9 weekly build.
Kernel confug with TricksterMOD:
CPU Governour: Preservative
FSync: On
SOC Temperaturlimt: On
CPU Clock 384-1512 mhz
GPU Clock: 400 mhz
Undervolt on all Frequencies: -37,5 mV
CPU Quiet: load stats
CPU powersave: very agressive
Soooo...this kernel is in beta stage ? are you kidding, @dragonnn ?
This is the best and fastest working kernel i have had for my Device and i will surely stick with it
Keep up the very good and hard work
Best Regard's
Alex1911
Yes, you have post your kernel in the new thread Very good news!
Thanks... Very thanks man
anything other good has future ?
* Gamma control
* Sweep 2 Wake
* Doubletap 2 wake
* USB Fastcharge
usb fastcharge is already , about s2w and dt2w in next version I think. With Gamma Control I will see what can I do.
It is beta because it wasn't tested by many users for now.
Wysłane z mojego C6603 przy użyciu Tapatalka
dragonnn said:
usb fastcharge is already , about s2w and dt2w in next version I think. With Gamma Control I will see what can I do.
It is beta because it wasn't tested by many users for now.
Wysłane z mojego C6603 przy użyciu Tapatalka
Click to expand...
Click to collapse
It has already been tested by me and I'm very happy (3 days already I am with your kernel)
Ok i'm very happy to your work because optimise kernel are very rare
PS: Gamma Control is really very good and will be appreciated
dragonnn said:
Does other kernels like MOEW works on it? Could you give me a logcat?
Wysłane z mojego C6603 przy użyciu Tapatalka
Click to expand...
Click to collapse
MOEW does not work with Vanir, im trying to get logcat during boot, ill also grab a syslog and upload, hopefully it helps. I managed to logcat usin adb and write output to PC, but dont know if it stopped once the device booted up with your kernel.
Will upload shortly
EDIT
Logs attatched
Screen flickering on DU v.07,.
Sent from my C6603 using XDA Premium 4 mobile app
spida_singh said:
MOEW does not work with Vanir, im trying to get logcat during boot, ill also grab a syslog and upload, hopefully it helps. I managed to logcat usin adb and write output to PC, but dont know if it stopped once the device booted up with your kernel.
Will upload shortly
EDIT
Logs attatched
Click to expand...
Click to collapse
muphetz said:
Screen flickering on DU v.07,.
Sent from my C6603 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It looks like booth of your ROM's uses different gpu driver with isn't compatible with my, unfortunately I can not do much for now without breaking the support for CM/SlimKat and other ROM's on they it works.
dragonnn said:
It looks like booth of your ROM's uses different gpu driver with isn't compatible with my, unfortunately I can not do much for now without breaking the support for CM/SlimKat and other ROM's on they it works.
Click to expand...
Click to collapse
No problem, i had a feeling it may have been ROM specific, any way to 'fuse' the ramdisk with the kernel similar to how alnikki25k does it, he has managed to keep compatibility by doing it this way, although there are still some graphical issues, which I think have been resolved, but not built / released since.
Either way, thanks for your work. I may have to switch ROMS, or wait for a solution.
Regards
spida_singh said:
No problem, i had a feeling it may have been ROM specific, any way to 'fuse' the ramdisk with the kernel similar to how alnikki25k does it, he has managed to keep compatibility by doing it this way, although there are still some graphical issues, which I think have been resolved, but not built / released since.
Either way, thanks for your work. I may have to switch ROMS, or wait for a solution.
Regards
Click to expand...
Click to collapse
I know what about are you talking - this needs are reworked flashable zip with generates the boot.img by using ramdisk form you old ROM with zImage (with is the kernel) when you flash it. I will provide such zip, but as you says this will not fix all problems.
Great work @dragonnn!
Working nicely on PA 4.3
This is a fantastic kernel...working on AOKP , thanks a lot @dragonnn
Sent from my Xperia Z using XDA Premium 4 mobile app