Related
Download the .apk found here. http://forum.xda-developers.com/showthread.php?t=1044765 i used version 1.2. install a file manager if you transfered the file from your pc and find the .apk and install it. if doing it from the device same thing. before opening the .apk make sure debugging is on and unknown sources is enabled.
Open the gingerbreak .apk and simply click Root device. If successful the device will reboot. Once it reboots download an app that requires superuser. and if all went well it should ask for superuser perms. Also you should now see the SU apk in your app draw.
Now Download Rom Manager from the market and flash Clockworkmod recovery and flash away. Rom manager is only good for flashing recovery nothing else works within it. You must manually enter recovery by holding + volume and power until bootloader menu appears. Then select option 2. Make sure your battery has 80% or more. No more fastboot. Good luck and happy streaking.
I'm not responsible if you brick your device. Do some reading before you think about rooting and see if its for you.
Thanks goes to the devs of gingerbreak.
THANK YOU HELLZYA!
And Thanks to Chainfire over at GingerBreak.
This is the coolest thing EVER!
So happy to have root now!!!!!!
Time to be a flash monster. lol
Very strange. I have SU but CWM does not work.
I click on Backup ROM and it just reboots.
I click on Install ROM from SDCard and it just reboots.
I click Reboot into Recovery and it just reboots.
Other than that everything else works great that needs SU.
Now everything force closes
I haven't been able to flash because everytime I reboot my Streak 7 returns to factory state, so in another thread I was suggested this workaround to help me get CWM installed and then flash another ROM...
Well, I ran this and it seemed to be fine, ran quick and then rebooted, but much to my disappointment, now everything force closes, everything, I can't even use the calculator.... and sometimes the startup wizard crashes and/or the home launcher...
Im worse off than when I started.
About the only info I can give you is that it's a Streak 7 with 2.2.2 installed
Gravityrat rom manager is only good for flashing recovery nothing else. You have to manually access. Cwr by holding plus volume and power till you see bootloader menu. Select option 2 and you will be presented with cwr. Make sure your battery is at 80% or more
sent from a tower
My bad... Figured that out laying in bed last night.
Giving StreakDroid7 v1.3 a try today.
Sent from my HTC Vision using XDA App
i rememeber reading this on streak forums last week
thanks for this!!! Too bad it was just one day late for me after spending 6 hours figuring everything out...
Where was this when I spent hours using SuperOneClick and finding workarounds?
But seriously, thanks for the method input! I love methods that don't require a computer (I'm trying to rid myself of a computer entirely, so I hate to hook up to my old desktop even if it's to root).
Thatruth it was actually posted this week. Saw it tryed it and it worked. Figured id share
sent from a tower
yeah i smoke alot so my days be off sometime lol
This worked great!!
Sent from my Dell Streak 7 using XDA App
Worked for me. Thank!!!
Awesome.
Sent from my Sensational Phone using XDA Premium App
Nice and simple worked for me
Sent from my X10 using XDA Premium App
Mods, can you replace the SuperOneClick sticky with this?
I am new at this, so can someone please explain how do I "make sure debugging is on and unknown sources is enabled"?
You need to download the gingerbreak apk from xda, make sure you allow opps from unknown sources and have debugging ticked, install the apk then open it and run it your streak will reboot then you have root hope it helps you
Go to your streaks settings and within there in applciations and development sections
Settings - applications - tick unknown sources - select development - tick debugging
Sent from my X10 using XDA Premium App
chiefy009 said:
You need to download the gingerbreak apk from xda, make sure you allow opps from unknown sources and have debugging ticked, install the apk then open it and run it your streak will reboot then you have root hope it helps you
Go to your streaks settings and within there in applciations and development sections
Settings - applications - tick unknown sources - select development - tick debugging
Sent from my X10 using XDA Premium App
Click to expand...
Click to collapse
Thank you for this explanation!
Do i REALLY need an SD card to do this?
I have one but it's a mini and i lost the adapter :s
I am using stock ICS, upgraded through KIES. But still i'm not able to install applications that have been downloaded as .apk. The install button in the installation screen doesn't seem to respond. But once i boot into recovery and wipe data, i get to install once and the problem is back again. Can anyone please help me out. is this common with ICS or am i the only one at stake ?
It's not common in ICS..
Anyways Be careful
Data wipe in ICS is not recommended...
It can be dangerous...
Do you know any reason why im not able to install applications?
Sent from my GT-N7000 using xda premium
Have you ubticked allow install from unknown sources in settings?
Are you sure the apk you are installing is compatible with ICS??
Maybe that are made for GB..
Obviously yes !!
Yea i had that install from unknown sources Checked. Not able to install any apps, the Install button remains dull. i had the same problem with AOSP ICS stunner also. And now the same with stock ICS.
I've got the exact same problem! ===and solved it ===
I'm on ICS stock, rooted and the install button does not respond.
Luckily i have an application (DX Toolbox) installed that allows me to install apk's. It uses a different interface.
Build in explorer, Root Explorer and ES File Explorer all use the main install screen with the 'defective' button.
I'm sorry to hear you've got this problem too, but also happy, cuz i honestly thought i was becoming retarded...
======Edit=======
I found out what app caused my troubles!
It was my screenfilter (got a yellowish screen tint, so it's always running). Once turned off everything worked as it should.
Pfff......was so close to getting retarded
Back in time. .
I rolled back to GB cuz i really got frustrated . Ll update and see if things get going better. And would you be kind enough to lemme know what screen filter you were using as i use ScreenFilter by haxor industry. and are you sure the app causes the problem ?
Akilesh said:
I am using stock ICS, upgraded through KIES. But still i'm not able to install applications that have been downloaded as .apk. The install button in the installation screen doesn't seem to respond. But once i boot into recovery and wipe data, i get to install once and the problem is back again. Can anyone please help me out. is this common with ICS or am i the only one at stake ?
Click to expand...
Click to collapse
Ok, you need root for this & also a root explorer.
Open your file manager navigate to etc/init.d/ and if you see the file 01mvdalvik move it to /mnt/sdcard/ then clear the cache and data for Play and reboot into recovery. Wipe your dalvik and cache in recovery and then reboot.
You will have much less internal memory after this. The script you moved (if it is there) tells the OS to move the dalvik to the system partition instead of the user partition. This causes problems with Play sometimes.
hi had exact same problem I to frustrated again I just uninstalled brightness apk(lux) than onwards installation working fine that's weired and I use lux app for auto brightness see wheather u installed any auto brightness. uninstall and check it
Sent from my GT-N7000 using Tapatalk 2
Will Check It out.
Thanks guys for your replies. Currently downloading stock ICS. will Upgrade and check out the "installation process".
If you have screen filter running then you'll have to disable it. Somehow install button doesn't respond when its enabled while everything else works just fine.
Sent from my GT-N7000 using XDA
Akilesh said:
I rolled back to GB cuz i really got frustrated . Ll update and see if things get going better. And would you be kind enough to lemme know what screen filter you were using as i use ScreenFilter by haxor industry. and are you sure the app causes the problem ?
Click to expand...
Click to collapse
I'm using 'filter your screen' app by Kovit. But this issue is caused by all kinds of apps that put some kind of layer on your screen. When i disable my filter i can install just fine, so I'm 100% sure this is the cause.
If you do a search for 'packet installer not working' you find similar threads. That's what i did after typing here
Hope it all works out for you, sorry you had to reinstall.
Sent from my GT-N7000 using xda premium
I'm back into the ICS truck. Can anyone suggest me a safe kernel without the emmc brick bug ?
Sent from my GT-N7000 using xda premium
Had the same problem, disabled Lux and I could install. Thx all!
Nirak said:
I'm on ICS stock, rooted and the install button does not respond.
Luckily i have an application (DX Toolbox) installed that allows me to install apk's. It uses a different interface.
Build in explorer, Root Explorer and ES File Explorer all use the main install screen with the 'defective' button.
I'm sorry to hear you've got this problem too, but also happy, cuz i honestly thought i was becoming retarded...
======Edit=======
I found out what app caused my troubles!
It was my screenfilter (got a yellowish screen tint, so it's always running). Once turned off everything worked as it should.
Pfff......was so close to getting retarded
Click to expand...
Click to collapse
Sorry to bring an old thread back to life, but I also had this issue -- I was running screenadjuster because I also have a yellow tint on my Samsung Galaxy S3, and I couldn't install APKs until I disabled the screen filter. I will file a bug report with the author
Deleted....
Sent from my GT-N7000 using xda app-developers app
hello,
i know creating a new thread isnt the nicest thing but my note isnt responding and im sweating badly
i have also posted this under the thread with the call recording mod but doing this here for faster response
i was running speedmod kernel k3-13 with stock 4.0.4
in the day to update by phone via ota reverted to stock kernel, still the update failed so reverted back to speedmod.
everything was working fine till then
sometime back thought of trying the call recording mod...
deleted the 2 files mentioned and then flashed the zip via recovery
after the reboot network gone, touch screen working intermittently and baseband version to unknown.
will flashing this rom via pc odin help? i dont have mobile odin
N7000DDLPA---4.0.3/12.06---N7000ODDLP5---Download--- India
i might have also done some stupid thing that i dont remember but i guess above mentioned is all what i did.
please help
thanks and regards
sujai
Just replied to call recording thread
Again writing steps here wait
Get root explorer
Put device in flight mode
Extract recording zip file
You will find two folder appl and lib in system folder
Now copy files in lib folder to system/lib
And appl files to system/app
Change permission. To rw-r-r
Delete phone. Odex and phone utility. Odex. From system/app folder
Sent from my GT-N7000 using xda premium
thanks doc for the blazing fast reply but had taken out the battery and was waiting for reply
now the touch screen wont work, it just stays on the home screen...thats it
i cannot go any further, no option works
please note that the phone is showing baseband version as unknown (saw it when the screen was working earlier)
and
there is no network aswell.
thanks doc, hoping for a solution.
even if i have to loose all my data to restore phone to factory rom and kernel, im okay with it. but just want my note to come to life.
Restart device and just try pressing power button and if you get option to flight mode, it should work for further procedure as I have mentioned.
If you finish as I suggest then you will get everything working with record mod too.
If you are unable to handle then just put device in Download mode and reflash modem with pc Odin it should work, in last resort just reflashed rom otherwise, neither method will wipe your data.
Just need patience, don't be panic this is little issue.
Sent from my GT-N7000 using xda premium
just flash the stock rom again using pc Odin to get back to original state
Sent from my GT-N7000 using xda premium
dear doc and nokiamodeln91,
pressing the power button does take it to airplane mode but then the phone does not get recognized by computer when i connect it.
so i would want to flash stock ROM straight away and just need a clarification. Ill put the phone in download mode, connect it to pc odin.
and then click the phone tab or the PDA tab?
will flashing this ROM - (N7000DDLPA---4.0.3/12.06---N7000ODDLP5) get me back to stock ROM and kernel?
afterwards i can always update it via OTA to the latest ROM and then put speedmod k3-13 kernel back, right?
will do as you say and report back. any other thing i should keep in mind while doing this?
thanks a ton for the help
regards
sujai
If you put ROM file for Phone, then it should work too. It will just replace your Modem, which is corrupted right now.
If it doesn't work then use it for PDA, it will replace full ROM and that will work sure.
a billion thanks doc for helping out!! though it failed in phone mode...worked in PDA mode and best thing is that i have all my data aswell.
thanks a ton and respect to you!!
sujaishukla said:
a billion thanks doc for helping out!! though it failed in phone mode...worked in PDA mode and best thing is that i have all my data aswell.
thanks a ton and respect to you!!
Click to expand...
Click to collapse
good to know all ok now:laugh:
sujaishukla said:
a billion thanks doc for helping out!! though it failed in phone mode...worked in PDA mode and best thing is that i have all my data aswell.
thanks a ton and respect to you!!
Click to expand...
Click to collapse
glad to know you recovered it, basically it was not a big issue, just bad flashing
Now if you want to recording MOD, don't flash zip but just copy files manually in flight mode.
thanks nokiamodeln91
and doc, right now i just flashed to LR9 by your method...rooted it and now installing mods...
your help has given me so much of confidence that everything seems so cool to do.
thanks a tons once again!!
(will trouble again if i mess up)
ewwww all my user installed apps have now gone grey!! followed everything to the T. did not do a clean install though
and though the phone has rooted i still dont hv supersu in appl drawer even after flashing the second way you mentioned...just letting you know so that you can check it out
Have you installed app to sd card?
This is bug on new launcher, move them to phone number everything will be fine.
Sent from my GT-N7000 using xda premium
sujaishukla said:
thanks nokiamodeln91
and doc, right now i just flashed to LR9 by your method...rooted it and now installing mods...
your help has given me so much of confidence that everything seems so cool to do.
thanks a tons once again!!
(will trouble again if i mess up)
ewwww all my user installed apps have now gone grey!! followed everything to the T. did not do a clean install though
and though the phone has rooted i still dont hv supersu in appl drawer even after flashing the second way you mentioned...just letting you know so that you can check it out
Click to expand...
Click to collapse
yes that happens to the apps moved to SD card.. restore them using TB or reinstall them
and as dr ketan mentioned.. on the new twhome launcher... the apps moved to SD card will not stay where to fixed in (folders etc)..
No need to restore with TB/Reinstall
Just go to setting - Application - Apl on SD
And appl which are on SD card will have option to move to phone, move from there and that will be sufficient.
yes doc did that yesterday and its all cool!! call recording and transparent weather widget also working great!! all thanks to you!!
are you trying to find out a way for apps to display icons even when they are moved to card?
No, I think it can be solved by new launcher only, hope next update we shall get it fixed
Sent from my GT-N7000 using xda premium
I Have created a CM7 rom for rooted 621 and it should a lot easier to use now that I have tested personally and everything works as it should no need for gapps as it has vendor.apk in it and it will update to playstore.
Flashing Instructions
1:Back-up always
2:full wipe
3:install rom via CWR or bootstrap
4:Gapps arent needed but you may flash just to be comfortable
5: reboot
6: leave me feedback
7: enjoy
Downloads
Rom: http://www.4shared.com/zip/PvWul1cI/KiladarsCM7GBKERNEL.html?
Gapps: http://www.4shared.com/zip/tDblkDjI/gapps-gb-20110828-signed.html?
Known Bugs:
Settings does not open working on it right now.
let me know what you guys think.
change log:
Settings updated should work now
I Have finally fixed the settings
will this work on gb.605?
Sent from my DROID RAZR using xda premium
I believe it should. I only have my 621. Flash at your own risk.
Sent from my DROIDX using xda app-developers app
ok I'll flash later then thanks
Sent from my DROID RAZR using xda premium
BADDINOROX99 said:
ok I'll flash later then thanks
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
If your scared that your phone may brick or boot loop remember to back up and if you need me to i can find you a tutorial to unbrick your device just for comfort
Kiladar said:
If your scared that your phone may brick or boot loop remember to back up and if you need me to i can find you a tutorial to unbrick your device just for comfort
Click to expand...
Click to collapse
I can't flash it yet because my computer is in the repair shop and I never do anything risky with my phones unless my computer is nearby
Sent from my DROID RAZR using xda premium
Okay. I wonder if anyone has tried this yet.
Sent from my DROIDX using xda app-developers app
I hope so it looks promising
Sent from my DROID RAZR using xda premium
Well Im very new at modding Droid X, but I have an important question...
Is the hdmi fully working?
Or is there any rom which make it work as it should?
I mean something like a mirror.
Thanks!
Downloading Now. I just hope it's for the rooted .621 Non-Milestone hack. The Milestone hack (for root) is .604.
Sent from my DROIDX using xda premium
Update:
First I tried it without gapps. Everything booted fine, but there was no market nor would accounts/ sync let me add Google account.
So, I rebooted into recovery, which worked fine, and flashed gapps.
This time on boot, I actually got the Droid X welcome screen, was able to put in Google info, and market initiator ran and updated.
After that everything worked fine.
Tested Bluetooth, Messages, Gps and Calls. Didn't get chance to try Wifi yet, but I'm sure it works since everything-else does.
The only thing that Would be better is an updated Superuser. The 1 included will NOT update SU Binary. I think it's the old edify binary. Even by updating Superuser in the market WON'T help. Although an easy fix is to get RootUninstaller and uninstall Rom Superuser, then download new 1 from the market and install.
Keep up the hard work. Nice Rom.
Finally, does this works for any other gb kernel besides .621?
Anybody please tell us!
Nope, but maybe yes
BADDINOROX99 said:
will this work on gb.605?
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
Nope, but I may have a bad download as I forgot to check the Md5 sum before I flashed. Install was aborted. I can't try again right now because I have another phone to flash and have to go to bed early tonight.
And thank your for the review I've been waiting for a review like that I've created a couple roms and no one has have gave me so much input
Sent from my SGH-i917 using XDA Windows Phone 7 App
No prob Kiladar. I think if someone is going to comment on someones work, they should at least review it and be as informative as possible. It makes it easier
on the devs to look at potential probs/fixes too.
Oh yea, I also got to looking into your system/app folder in your zip. The vending.apk is Not in there, which i would say is why I had to flash the gapps. Just wanted you to know.
Also there is no "boot.img" (which is kernel right?) in the new dwnload.
Right, I will update OP saying to flash gapps rather then say not needed
Sent from my SGH-i917 using XDA Windows Phone 7 App
Beanerman said:
Downloading Now. I just hope it's for the rooted .621 Non-Milestone hack. The Milestone hack (for root) is .604.
Sent from my DROIDX using xda premium
Update:
First I tried it without gapps. Everything booted fine, but there was no market nor would accounts/ sync let me add Google account.
So, I rebooted into recovery, which worked fine, and flashed gapps.
This time on boot, I actually got the Droid X welcome screen, was able to put in Google info, and market initiator ran and updated.
After that everything worked fine.
Tested Bluetooth, Messages, Gps and Calls. Didn't get chance to try Wifi yet, but I'm sure it works since everything-else does.
The only thing that Would be better is an updated Superuser. The 1 included will NOT update SU Binary. I think it's the old edify binary. Even by updating Superuser in the market WON'T help. Although an easy fix is to get RootUninstaller and uninstall Rom Superuser, then download new 1 from the market and install.
Keep up the hard work. Nice Rom.
Click to expand...
Click to collapse
wifi works just fine with it, and I agree bout the updated superuser since you cant uninstall the one you have with it which means you also cant update to the new superuser because they are different volumes but over all nice ROM.:good:
thelangosta said:
Nope, but I may have a bad download as I forgot to check the Md5 sum before I flashed. Install was aborted. I can't try again right now because I have another phone to flash and have to go to bed early tonight.
Click to expand...
Click to collapse
I had it working on mine but my .605 was the .621/.605 deodexed hacked version cause I was on the .621 before I did the work around on the magic 5 route, originally I did the .604 work around but it should work on the .605 stock rooted, but then again I was also running the kernel for the .621 sooooo if the kernel is the key for running it maybe you cant.
Try another download, maybe you did get a bad DL
Other issues with phone
mbm262 said:
I had it working on mine but my .605 was the .621/.605 deodexed hacked version cause I was on the .621 before I did the work around on the magic 5 route, originally I did the .604 work around but it should work on the .605 stock rooted, but then again I was also running the kernel for the .621 sooooo if the kernel is the key for running it maybe you cant.
Try another download, maybe you did get a bad DL
Click to expand...
Click to collapse
I tried this again but, I think the real problem is with my microSD card. I have subsequently tried to flash other roms and have had other aborts as well. I know that the md5's on those checked out. I was able to flash a cm9 based rom and got it set up just fine. All this from the same card on the same phone. Sooo I am attempting to format the card just in case I have bad sectors or something.
Luckily my DX is no longer activated and just keeps me from killing my SGS3 with flashes.:silly:
thelangosta said:
I tried this again but, I think the real problem is with my microSD card. I have subsequently tried to flash other roms and have had other aborts as well. I know that the md5's on those checked out. I was able to flash a cm9 based rom and got it set up just fine. All this from the same card on the same phone. Sooo I am attempting to format the card just in case I have bad sectors or something.
Luckily my DX is no longer activated and just keeps me from killing my SGS3 with flashes.:silly:
Click to expand...
Click to collapse
I hear ya, I had the same prob with sd card so i formatted mine as well, problem was still there though. whenever i tried to install a rom from sd card via rom manager the problem was i kept getting the message saying waiting for sd cart to mount then it would say error bla bla bla sending log file to cwm ect ect ect.... i dont know exactally how i fixed that, all i know is i installed another rom, like cm7 or cm9 for instance and after that whenever i went to back up rom it worked fine ever since.... maybe something flashes over correcting the sd card problem when you install a rom... I know rom manager checks to verify the marker on sd card and thats what your problem is I believe.
Try doing this, try installing a rom cm7/cm9 without making a backup (i know you could lose everything if it fails but its the only way i know that fixed mine) after you have installed cm7/9 go to rom manager and hit the Backup Current Rom it should reboot you to cwm recovery and make an auto backup, if it does this without throwing up the waiting for sd card to mount error stuff and it runs the backup program and then reboots you it should fix your sd card problems.....
Review this rom
this is by far a ROM with the least lag by far i tried liquid ICS and plenty others don't know what it is but the lag is really minimal runs really smooth i only have this for like 3 hours but will update soon
pls hit thanks if i helped
Because I'm not allowed to post to the appropriate thread in the developer forum, here my experiences with the latest CM-10.2 from August, 27th 2013 by C-o-M:
Upgraded device GT-P3700 from Android 3.1 Honeycomb (maybe some new user finds these instructions useful):
1) Rooted device by applying root-original.zip using stock recovery.
2) Applied latest code.google.com/p/tab89cm/downloads/detail?name=Clockwork_Recovery_6.0.2.7_GT-P7300.zip&can=2&q=" using stock recovery.
3) Wiped cache, data partition, cleared, dalvik cache, ran factory reset using CWM.
4) Applied CM-10.2 and appropriate gapps-jb-mr2-noneon-20130824-signed.zip using CWM.
First, I noticed a minor thing: The cyanogenmod boot animation is a bit strange though; it seems broken the first few moments, that is there seems to be a wrong display mode set that distorts the image, or maybe the orientation is wrong. Whatever, it does no harm to general functionality and the screen restores itself shortly before the home screen is being loaded, and shows the correct logo animation.
So far, everything works fine except GPS (apart from HDMI out which I can't even test). I can use fdroid now which crashed on stock. And everything is very smooth and snappy now. I've tested WLAN and bluetooth, no 3g so far (but other user reports claim it works fine).
It would be nice if the GPS could be made to work. I'd like to use the tablet as an offline navigation system sometimes. GPS is reported to be enabled, but no satellites are found.
Otherwise great job, thanks a lot!
@Moderators: If it is no issue, please grant me rights to post to the appropriate dev thread directly. It is a bit impractical to post this out of place.
dark$hadow said:
Because I'm not allowed to post to the appropriate thread in the developer forum, here my experiences with the latest CM-10.2 from August, 27th 2013 by C-o-M:
Upgraded device GT-P3700 from Android 3.1 Honeycomb (maybe some new user finds these instructions useful):
1) Rooted device by applying root-original.zip using stock recovery.
2) Applied latest code.google.com/p/tab89cm/downloads/detail?name=Clockwork_Recovery_6.0.2.7_GT-P7300.zip&can=2&q=" using stock recovery.
3) Wiped cache, data partition, cleared, dalvik cache, ran factory reset using CWM.
4) Applied CM-10.2 and appropriate gapps-jb-mr2-noneon-20130824-signed.zip using CWM.
First, I noticed a minor thing: The cyanogenmod boot animation is a bit strange though; it seems broken the first few moments, that is there seems to be a wrong display mode set that distorts the image, or maybe the orientation is wrong. Whatever, it does no harm to general functionality and the screen restores itself shortly before the home screen is being loaded, and shows the correct logo animation.
So far, everything works fine except GPS (apart from HDMI out which I can't even test). I can use fdroid now which crashed on stock. And everything is very smooth and snappy now. I've tested WLAN and bluetooth, no 3g so far (but other user reports claim it works fine).
It would be nice if the GPS could be made to work. I'd like to use the tablet as an offline navigation system sometimes. GPS is reported to be enabled, but no satellites are found.
Otherwise great job, thanks a lot!
@Moderators: If it is no issue, please grant me rights to post to the appropriate dev thread directly. It is a bit impractical to post this out of place.
Click to expand...
Click to collapse
thanks for your expierens. I am use CM 10.2 from first reply and before also CM 10.1 by different versions , i think the Boot animation is not a bug.
I think also it is better that .we were are user have the Chance to post our expirence at the thread,but these are the rules.
For me is this version very good and i am used my tab daily. My onlyest bug are the battery drain. So i searcht settings .were i can reduced this.
Sent from my GT-P7310 using xda app-developers app
What the prob with the GPS?
Im still thinking to flash this rom....but worried about the bugs...
Coz i had softbricked my tab few time b4... huhu...
slaughterer0206 said:
What the prob with the GPS?
Im still thinking to flash this rom....but worried about the bugs...
Coz i had softbricked my tab few time b4... huhu...
Click to expand...
Click to collapse
I don't think there's any risk of bricking while flashing this rom. Just make a nandroid if you are worried, and restore it if the bugs aren't worth it. If you are going back to ics, you will have to move all the files from /sdcard/0 to /sdcard, but that's easy enough. Going back to any 4.2.x rom is no hassle at all.
Other than HDMI, is there any other issues with this rom?
Saw some people have problem with APN...with on/off the aeroplane mode will solve it i think..
Coz i had this issue b4...
No calls
Everything seems fine except I can't make or receive calls (GT-P7300)
As soon as I can press Call it hangs up. Can't receive calls either.
Data over 3G is fine, and I can send/receive SMS messages no problem.
Grabbing output from logcat, everything seems fine except for this:
Code:
E/BluetoothPhoneService( 974): Could not get a handle on Connection object for the call
Which is the only error I see. I'm not trying to use Bluetooth (it's turned off).
Anyone else with this issue?
Just flash cm10.2 by com...
So far, all good... 3g APN already set after boot...
GPS on google map, waze & sygic so far is ok.. Didnt try navigating yet
Issue I found so far
-cannot reboot...it just switch off the tab & need to on manually
-when open setting>interface>quick setting panel>tyle & layout..
then press "back", its FC & written "unfortunately, setting has stopped"
-call in & out is not functioning.. does we need to do someting to make it work? (Like installing modem on ics rom before)
lost root after installed.
Sent from my GT-P7310 using XDA Premium 4 mobile app
asiansdude said:
lost root after installed.
Sent from my GT-P7310 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Go to setting > about tablet...then tap build number 7/8 times.. then enable root at developers
GPS prob are fixed,show the thread by COM 10.2 ( 4.3 ) post 133 by DemonGloom,Post #133
Be fore i ve copyed the file i show only 2 Satellit after then 10 and more
Sent from my GT-P7310 using xda app-developers app
bierma32 said:
GPS prob are fixed,show the thread by COM 10.2 ( 4.3 ) post 133 by DemonGloom,Post #133
Be fore i ve copyed the file i show only 2 Satellit after then 10 and more
Sent from my GT-P7310 using xda app-developers app
Click to expand...
Click to collapse
Yeah... now when i open Sygic, it directly detect the satellite... :good:
New Version are avaible , See the threat from Com 10.2 ( 4.3 ) post #1 are updatet, but its complet untest
I hope set are the knowend bugs are fixed
Sent from my GT-P7310 using xda app-developers app
Saw some comment about touchscreen delay...but im not sure what thats issue is all about...
Today I am flashed the new version 10.2 (4.3)from Com
Before I am flashed the new version I am make a backup,to make sure to go back when something going wrong
I done no wipe or factory reset, flashed directly over the old version.
at the startup comes a new account by cynagon
I ve test wlan , GPS , google now , email and all my apps works fine.
root works also.
at the touchscreen I see now lag,
also new user works now
edit: if got the reboot issue, when I press the reboot button on the logscreen ,the tab shuts down but it didn't restart. I must make an hard reset, press and hold 15 seconds the power button before tab restart.
The thame I must do after fully charging. ( the tab was off )
Sent from my GT-P7310 using xda app-developers app
allywilson said:
Everything seems fine except I can't make or receive calls (GT-P7300)
As soon as I can press Call it hangs up. Can't receive calls either.
Data over 3G is fine, and I can send/receive SMS messages no problem.
Grabbing output from logcat, everything seems fine except for this:
Code:
E/BluetoothPhoneService( 974): Could not get a handle on Connection object for the call
Which is the only error I see. I'm not trying to use Bluetooth (it's turned off).
Anyone else with this issue?
Click to expand...
Click to collapse
I've finally figured out how to get the calls working on my GT-P7300 / P5.
I used the latest 10.2 from C-o-M, called cm-10.2-20130912-UNOFFICIAL-P5.zip, installed it under CWM 5.5, rebooted (no flushing of cache). Let it upgrade the apps (let it take me through the latest register for Cyanogenmod stuff as well). SMS and data working, still no calls though.
Found this forum post.
I downloaded the file called CWM_I9103XXLQ3_Modem.zip and installed it under CWM 5.5 again. Rebooted (again no flushing of cache) - and it works!
That forum post has ZIP files named after the baseband with "ENABLE VOICE CALL" on the end as well, and although I downloaded the one specific to my modem version (P7300XXLQ6) I didn't need to install it to get the calls working.
Hope the above makes sense and helps other people!
Ally
Wanna ask... im having video & music stopping everytime notification message....
So far it happen on youtube, viki & apollo...
Did anyone having similar prob?
Wi-fi band function?
Does anyone know if 5ghz wifi is broken on C-O-M's 10.2-20130912 build? If it isn't, what channels are people using?
Fix make/receive call in p7300
allywilson said:
I've finally figured out how to get the calls working on my GT-P7300 / P5.
I used the latest 10.2 from C-o-M, called cm-10.2-20130912-UNOFFICIAL-P5.zip, installed it under CWM 5.5, rebooted (no flushing of cache). Let it upgrade the apps (let it take me through the latest register for Cyanogenmod stuff as well). SMS and data working, still no calls though.
Found this forum post.
I downloaded the file called CWM_I9103XXLQ3_Modem.zip and installed it under CWM 5.5 again. Rebooted (again no flushing of cache) - and it works!
That forum post has ZIP files named after the baseband with "ENABLE VOICE CALL" on the end as well, and although I downloaded the one specific to my modem version (P7300XXLQ6) I didn't need to install it to get the calls working.
Hope the above makes sense and helps other people!
Ally
Click to expand...
Click to collapse
Thank you! I've just flash CM 10.2 and i found out that is the smoothest rom i've ever flash (Rom stock, 4.4.2 Nameless, Omni) . I also have an issue in making and receiving phone call . I'll try fix it
This flash gave a new life to 8.9 tab
Everything works OK...
haven't tried gsm calls but i do not need this feature.
Anybody with "Screen is on while Sleep" problem try "com.afilon.sleepbutton" app from Play-store to put your tab to sleep