Hi all,
I tried to overclock my Mini II but it doesn't worked. I followed the instructions from this link:
Please click here
I downloaded the overclocked kernel and installed it via CWM but nothing changed. The Kernel Version on my phone is still 2.6.38.6 and overclocking is not available in CPU-Tuner. I just can lower the frequence (<800MHz).
Here some more Infos about my device:
GT-S6500
Gingerbread.XXMD1
Original Stock ROM with CWM and ROOT.
Any hints?
Thanks in advance!
Peter
EDIT: Got IT! Thread can be closed! I downloaded the updated version from this site again and it worked!
Install cm 10.1 and be happy
Sent from my GT-S6500 using Tapatalk 2
Related
Please help!
I have cm7.1 installed using CWM, I tried overclocking to 768, 868, 928, 864, etc using CWM and didn't work. Please help me on this! A step by step instruction would be nice.
Is it to be installed using CWM itself?
What is the max. freequency I can overclock?
please reply!
nelsonchrissimom said:
Please help!
I have cm7.1 installed using CWM, I tried overclocking to 768, 868, 928, 864, etc using CWM and didn't work. Please help me on this! A step by step instruction would be nice.
Is it to be installed using CWM itself?
What is the max. freequency I can overclock?
please reply!
Click to expand...
Click to collapse
THese are the article that you need to Go through
http://yagyagaire.blogspot.com/search/label/Overclocking Kernels
Also, for more articles or information about Galaxy Mini, just click the message on my Signature below. You will get to know almost everything about Galaxy Mini.
Thanks buddy!
Hello. Can I flash CyanogenMOD 7.2.0 RC5.5 on Galaxy Mini with the following firmware:
PDA: S5570LWMKPJ
CSC: S5570LUUBKP8
Currently running Gingerbread 2.3.6 with root. Have also flashed CWM
No. Squadzone wrote that you need a KPI, KPL or KPK stock rom. However you can just try and see if it works, but maybe you'll get some troubles...
Could I flash the required stock rom instead, then go ahead and flash cyanogen mod?
Sent from my GT-S5570L using XDA App
markledra said:
Could I flash the required stock rom instead, then go ahead and flash cyanogen mod?
Sent from my GT-S5570L using XDA App
Click to expand...
Click to collapse
Actually, you can use any baseband you like.. I have used plenty of them and did not have any issues. from EU to Latin AM firmware.. but for best results, you use the preferred baseband that developers specify..
markledra said:
Hello. Can I flash CyanogenMOD 7.2.0 RC5.5 on Galaxy Mini with the following firmware:
PDA: S5570LWMKPJ
CSC: S5570LUUBKP8
Currently running Gingerbread 2.3.6 with root. Have also flashed CWM
Click to expand...
Click to collapse
kitrax59 said:
Actually, you can use any baseband you like.. I have used plenty of them and did not have any issues. from EU to Latin AM firmware.. but for best results, you use the preferred baseband that developers specify..
Click to expand...
Click to collapse
He's right, buddy.
I've tried 2.3.6 with CM7 RC5.5. And I got several problems. When I play Angry Birds, sometimes it closed itself, sometimes the phone reboot after I send message & lock the screen. Sometimes the screen doesn't coming back after I lock it.
So, use recommended baseband. It'll work for the best.
markledra said:
Hello. Can I flash CyanogenMOD 7.2.0 RC5.5 on Galaxy Mini with the following firmware:
PDA: S5570LWMKPJ
CSC: S5570LUUBKP8
Currently running Gingerbread 2.3.6 with root. Have also flashed CWM
Click to expand...
Click to collapse
i had same baseband and CyanogenMOD works prefectly.
i've tried also with S5570JVKT1 and still works fine.
i think that any baseband with GB is fine for Cyanogen ( but i've not tried all )
XXKPK is the best base for cm doesnt matter if its squads or the rc0 fom madteam or mebitek!! Choose kpk and you dont get in trouble ;-)
Sent from my GT-S5570 using xda premium
what will happen or what is the benefit after I installed the CWM on my stock/ official 2.3.4GB?
Please give me some pro's and con's because I've been curious about cwm since ive been encountering that term every time I read here in xda.
just a noob...thanks
xany_28 said:
what will happen or what is the benefit after I installed the CWM on my stock/ official 2.3.4GB?
Please give me some pro's and con's because I've been curious about cwm since ive been encountering that term every time I read here in xda.
just a noob...thanks
Click to expand...
Click to collapse
No Con's, Just Pro's.. hahaha You can flash custom ROMs once you have cwm installed..
yes you can't, i used xxwmkpj for my rc 5.6...fine for me..
Better use squadzone's prefered baseband
Sent from my GT-S5570 using xda premium
** MOD EDIT: Thread closed at OP request **
hi guys
i'm new user of the galaxy s1 so my question is what's the best rom to use the stable version of cyanogenmod 9.1 or last nightly cm 10?
and what's the best kernel to use?
thanks in advance
midomad said:
hi guys
i'm new user of the galaxy s1 so my question is what's the best rom to use the stable version of cyanogenmod 9.1 or last nightly cm 10?
and what's the best kernel to use?
thanks in advance
Click to expand...
Click to collapse
Hmm. A lot of threads to read in the development section for you there are. Answers you will find.
-
But as I am kind:
I think the best beginner roms with great benefit are darkys roms. But since u have to flash cm9 to flash darkys v11 black, you can also stay with cm9.
I think the stable 9.1 is a good choice with either semaphore 1.3.0 kernel or devils 1.0.3 kernel.
Cm10 is still too unstable for me, but I am sure there are other opinions.
Sent from my GT-I9000 using xda app-developers app
moriansafas said:
Hmm. A lot of threads to read in the development section for you there are. Answers you will find.
-
But as I am kind:
I think the best beginner roms with great benefit are darkys roms. But since u have to flash cm9 to flash darkys v11 black, you can also stay with cm9.
I think the stable 9.1 is a good choice with either semaphore 1.3.0 kernel or devils 1.0.3 kernel.
Cm10 is still too unstable for me, but I am sure there are other opinions.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
thank you
now that i have instaled cm stable 9.1
is there any script to flash or kernel?
and what about memory do i need to install any script?
midomad said:
thank you
now that i have instaled cm stable 9.1
is there any script to flash or kernel?
and what about memory do i need to install any script?
Click to expand...
Click to collapse
In CM, you are flashing kernels, modems, mods - via CMW (flash zip from sdcard).
I think ICS - based roms don't need any memory tweaks.
midomad said:
thank you
now that i have instaled cm stable 9.1
is there any script to flash or kernel?
and what about memory do i need to install any script?
Click to expand...
Click to collapse
CM9.1's stock kernel works well.
IMHO If you're not looking for specific tweaks, you don't need to flash a different kernel.
what's about memory(storage)?
do i need to install anything to expand it?
midomad said:
what's about memory(storage)?
do i need to install anything to expand it?
Click to expand...
Click to collapse
Storage is physical memory. You have to buy a external microSD card or delete apps to get more.
If you are talking about ram: there are tweaks in the kernels mentioned above.
Sent from my GT-I9000 using xda app-developers app
Hi guys,
I'm running on CyanogenMod 9.1.
Which kernel i can use to overclock CPU? Is siyah kernel compatible with CM9??
Please help.
hi guys i'm new here
how do i use this mod?
[KERNEL][STOCK GB 2.3.x] 06-11-2012 PSN>> Kernel Memory-Modded SWAPALL v3.0 & SuperSU
what are the prereqs?
do need to root? flash CWM? custom Rom or stock rom?
installation Procedure pls!
i really have no idea pls help!
Thanks In Advance!
im using galaxy ace s5830
Monmimi17 said:
hi guys i'm new here
how do i use this mod?
[KERNEL][STOCK GB 2.3.x] 06-11-2012 PSN>> Kernel Memory-Modded SWAPALL v3.0 & SuperSU
what are the prereqs?
do need to root? flash CWM? custom Rom or stock rom?
installation Procedure pls!
i really have no idea pls help!
Thanks In Advance!
im using galaxy ace s5830
Click to expand...
Click to collapse
You need to root, flash cwm and flash the rom through cwm. Instructions on flashing the rom are given on its thread. Instructions on rooting are given as a sticky in the general page. Good luck.
Press thanks if I helped!
Sent from my GT-S5830 using xda premium
Hey everyone!
I am running DDLSC Stock ROM (un-rooted) on my Galaxy Note N7000. I want to try custom ROM's on this device and firmware. Can you please answer these queries for me?
What ROM should I install?
Is it possible to install a ROM on this Firmware?
Do I need to Root my device?
Thank you for your help!
1 Try cm 10.2 as a start.
2 Yes..why not.
3 Of course you need to. Use philz kernel as per your build. I see it's ddlsc so you can flash philz_lsc and gain root. Just make sure to use the appropriate version of philz kernel as per your build. Detailed instructions are on the original thread. Just do a little search.
Sent from my GT-I9105 using xda app-developers app
Hi,
if you want Tablet feeling, i advice you N8XT Rom here: http://forum.xda-developers.com/showthread.php?t=2366175
It's very smooth and fast with C.O.H Kernel. I'm using it since 2 weeks. GREAT. It's stable and also has a Touchwiz UI.
But first flash a Philz Kernel via Odin.
Thank you for the suggestions!
I am installing CM 10.2 as of now.. Will then try out a few ROMS
Thanks for the help everyone!
Thread closed as its a Best ROM thread.