Serious problem with my bootup - Galaxy S III Mini Q&A, Help & Troubleshooting

Hey XDA people & general Androiders,
I do a lot of Hacking, Modding and all that crap
BUT
I've got a serious problem with my boot up :crying:
Instead of the regular holding of the on button and receiving the
"Samsung Galaxy S III Mini GT-I8190N"
I get this
*If the picture isn't here it should be at the bottom of this OP*
It happened right after I checked the information of Enabling the HSUPA MOD on Pimp My Rom, as soon as I touched the *i with circle around it* Icon, it went to some weird screen, I did a battery pull and then it went to that weird screen, that's been my boot animation ever since, I've wiped everything including internal and external storage (backed up before just encase), tried everything, flashed a new kernel, tried to remove the current "boot animation" from /data/local and all the other places like data/media etcetera but nothing works
What do I do?
My phone just looks weird and broken at the boot-up now because of it...
PLEASE HELP I APPRECIATE ALL THE CONTRIBUTIONS!

LordwinOfficial said:
Hey XDA people & general Androiders,
I do a lot of Hacking, Modding and all that crap
BUT
I've got a serious problem with my boot up :crying:
Instead of the regular holding of the on button and receiving the
"Samsung Galaxy S III Mini GT-I8190N"
I get this
*If the picture isn't here it should be at the bottom of this OP*
It happened right after I checked the information of Enabling the HSUPA MOD on Pimp My Rom, as soon as I touched the *i with circle around it* Icon, it went to some weird screen, I did a battery pull and then it went to that weird screen, that's been my boot animation ever since, I've wiped everything including internal and external storage (backed up before just encase), tried everything, flashed a new kernel, tried to remove the current "boot animation" from /data/local and all the other places like data/media etcetera but nothing works
What do I do?
My phone just looks weird and broken at the boot-up now because of it...
PLEASE HELP I APPRECIATE ALL THE CONTRIBUTIONS!
Click to expand...
Click to collapse
Download, unzip, and flash in odin. Put the "code"-file in PDA, and "csc"-file in CSC.
It's an older fw, but it's service-fw (thats why file is so big). Flash a newer one after if you like. I also prerooted this one.
I8190NXXALL4__693204_REV00__user_low_ship_Pre-root.zip - 1.29 GB

tys0n said:
Download, unzip, and flash in odin. Put the "code"-file in PDA, and "csc"-file in CSC.
It's an older fw, but it's service-fw (thats why file is so big). Flash a newer one after if you like. I also prerooted this one.
I8190NXXALL4__693204_REV00__user_low_ship_Pre-root.zip - 1.29 GB
Click to expand...
Click to collapse
Oh yeah, I thought it worked, have you got another link to it because it says that it's broken, like mediafire or something like that, and could you compress it a bit more if you can please, that'd be great tys0n

LordwinOfficial said:
Oh yeah, I thought it worked, have you got another link to it because it says that it's broken, like mediafire or something like that, and could you compress it a bit more if you can please, that'd be great tys0n
Click to expand...
Click to collapse
Lets see if this works better. I8190NXXALL4_693204_REV00_user_low_ship-PreRoot.zip

tys0n said:
Lets see if this works better. I8190NXXALL4_693204_REV00_user_low_ship-PreRoot.zip
Click to expand...
Click to collapse
Yes! Worked, Thanks Man

Related

[Q] SGS user urgently need help!!

Firstly guys, I'd like to apologise for this being my first post. I'm usually a regular over at the SGS forums but am yet to have had a response. I'm ****ting bricks currently, so here goes...
ARGH wtf. Just as I thought I had the perfect phone, it messes up! Darky's ROM went mad on me. Kept rebooting the phone. Kept vibrating throughout. No idea what's wrong with it. Tried to do a wipe install of the ROM again, but the bloody thing has disappeared from the SD card! What am I going to do now? Reflash back to my previous firmware and start all over again, AGAIN? Ffs.
Just for the record, I'm basically stuck in recovery mode. It's either that or staring at the Nexus S logo as it attempts to boot, over and over and over... I'm so angry right now! I didn't do anything to the phone for this to happen! Bad luck or what. Really hope there is a solution to this. I don't suppose there's anyway of accessing the device's SD memory when in recovery mode? I just need to plant the update.zip on the SD card again so I can reflash it!
Click to expand...
Click to collapse
I would massively massively appreciate any help you guys could give me. I've had nothing but bad luck with my Galaxy S
[EDIT] Oh and by the way, I still have full access to my three-button combo modes. Clockwork recovery console and Download mode still fully accessible.
Hi
I'm also new here and got my SGS yesterday, but i had a HTC Desire before.
If you can get in to Clockworkmod recovery you should be able to push the file via adb to the sdcard. That was possible on the Desire at least.
vippe said:
Hi
I'm also new here and got my SGS yesterday, but i had a HTC Desire before.
If you can get in to Clockworkmod recovery you should be able to push the file via adb to the sdcard. That was possible on the Desire at least.
Click to expand...
Click to collapse
Hey there, thanks for your response! What may I ask is 'adb'?
Android development....something
Just flash back to eclair again. The time it took you to get an answer on a forum is longer tham the time it takes to flash.
Sent from my GT-I9000 using XDA App
I'm guessing you screwed up without diabling lagfixes or something, just install JM8 with repartition enabled and using pit 512 file again then install clockwork update.zip then install whatever rom (but in this case darkys). It starts to become habbit when testing new roms to do all of them steps, The first time something happens you **** bricks but soon relize the SGS is alot more brick poof then you think (unless you are one of the poor souls with broken recovery modes)
But anyways, calm the hell down. Everything is fine.
ickyboo said:
I'm guessing you screwed up without diabling lagfixes or something, just install JM8 with repartition enabled and using pit 512 file again then install clockwork update.zip then install whatever rom (but in this case darkys). It starts to become habbit when testing new roms to do all of them steps, The first time something happens you **** bricks but soon relize the SGS is alot more brick poof then you think (unless you are one of the poor souls with broken recovery modes)
But anyways, calm the hell down. Everything is fine.
Click to expand...
Click to collapse
I've absolutely no idea what files to flash... I'm a bit of a noob when it comes to flashing with the SGS. Quite embarrassing actually because I used to flash my old Omnia HD with no problems whatsoever! Don't suppose you could link to files.
Don't worry, your Galaxy is not bricked. Please see here how to reflash from a PC.
I've downloaded all necessary files... I've got a CODE a MODEM the 512.pit but no CSC? Am I okay to flash with no CSC?
Eddzz!! said:
I've downloaded all necessary files... I've got a CODE a MODEM the 512.pit but no CSC? Am I okay to flash with no CSC?
Click to expand...
Click to collapse
CSC contains all carrier-related (like APNs) data.
Depending on the type of packaging some CODE files are complete with CSC.
In any case, you can flash a CSC (like ITV or XEU) even later.
Before to go with flash, I'd like to advise you to backup /efs folder on your SD and/or your PC. This is the only folder with information (like your IMEI configuration) that cannot be recovered in case of a total data loss.
After a long gruelling process of flashing and reflashing, I'm back on Darky's ROM. Problem though - App market is messed up. I can't download anything from the Market and it's also the 'old' Market theme... I think has something to do with the fact that I've flashed from Eclair straight to Darky's? (Which I was advised to do...) - How can I get my Market working again?! Everything is fine besides that!
[EDIT] I now have the new market interface but still cannot download a thing!

[Q] Seriously? Why does my new captivate constantly brick?

Sorry for the long read, this is half rant and half question.
Alright, I got a captivate a long time ago (about a year and 3 months ago), loved it, rooted it and installed cyanogenmod as soon as I got home, changed roms and kernals constantly, did whatever I wanted to do.
About 3 months ago my screen stopped working.. So I take it in and they give me a refurb captivate, looked brand new so I didn't mind. However, when I tried to get into recovery it didn't work, the 3-button-method just wouldn't work at all, period, so I try to get it to work, gets stuck in bootloop.. pretty much every time I try to flash a rom something goes wrong and I get stuck in a bootloop but I can usually get into recovery or download mode because I had CWM.
So I'm on maxq's rom and it's working great for the past 2 months, decide not to mess with kernals or anything, however today I decided to try ICS, load it up, everything's fine, then I realize my soft keys aren't working, search for awhile, can't find anything, finally just manually start looking through the rom pages, and someone said that if you have the problem to just odin back to stock and try again.
I odin back to stock, but now 3 button combo doesn't work.. So more searching, find that I can run the 3e fix by TRusselo, doesn't work because I need root, more searching on how to root without recovery, find "SuperOneClick", root with superoneclick, then run 3e fix, everything is working fine, I check my email and load the ICS files onto SD card, go to restart and go into recovery mode.. Bricked, stuck in a bootloop, won't go to recovery, won't go to download, nothing.
Why the **** was I able to do anything I wanted with my old captivate, but if I even root this one it bricks? And what did I do to even brick it? I only ran the 2 programs and both of them worked flawlessly.
I guess my only option is to usb jig it, but honestly now I'm convinced that the phone is just faulty, I want to run the thing over.
-Pirate said:
So I'm on maxq's rom and it's working great for the past 2 months, decide not to mess with kernals or anything, however today I decided to try ICS, load it up, everything's fine, then I realize my soft keys aren't working, search for awhile, can't find anything, finally just manually start looking through the rom pages, and someone said that if you have the problem to just odin back to stock and try again.
Click to expand...
Click to collapse
If you would have actually searched you would have known it was a bug in the glitch. There are atleast 40 pages about that.
-Pirate said:
I odin back to stock, but now 3 button combo doesn't work.. So more searching, find that I can run the 3e fix by TRusselo, doesn't work because I need root, more searching on how to root without recovery, find "SuperOneClick", root with superoneclick, then run 3e fix, everything is working fine, I check my email and load the ICS files onto SD card, go to restart and go into recovery mode.. Bricked, stuck in a bootloop, won't go to recovery, won't go to download, nothing.
Click to expand...
Click to collapse
If you flashed ICS you should know it takes 2 flashes for it to work first time. Having a jig around is always a good idea as well.
-Pirate said:
Why the **** was I able to do anything I wanted with my old captivate, but if I even root this one it bricks? And what did I do to even brick it? I only ran the 2 programs and both of them worked flawlessly.
Click to expand...
Click to collapse
Stuff doesn't work as intended. Keep in mind everything is still in dev and not all devices are the same. But you should have searched a little more and it would have ran =/
U def don't need a jig. If it's booting it's not bricked. Try removing battery, start Odin, hold down power and down, plug in and put battery in. This should bring u to download mode.
prbassplayer said:
If you would have actually searched you would have known it was a bug in the glitch. There are atleast 40 pages about that.
Click to expand...
Click to collapse
I did start to see a few people with the problem, however many people do not follow up with what fixes their problem, and I did what a few people had said to do.
prbassplayer said:
If you flashed ICS you should know it takes 2 flashes for it to work first time. Having a jig around is always a good idea as well.
Click to expand...
Click to collapse
I should of mentioned that I did flash a few times, 3 total I think, it was getting stuck at boot.
prbassplayer said:
Stuff doesn't work as intended. Keep in mind everything is still in dev and not all devices are the same. But you should have searched a little more and it would have ran =/
Click to expand...
Click to collapse
I understand that **** happens but honestly my old captivate could always get into recover mode and download mode no matter what, it's extremely frustrating that something changed with the newer models. One of my questions was what caused the brick? I did nothing wrong from what I see and it was running perfectly until I tried to restart/boot into recovery.
Oh and mbc663, thanks but download mode doesn't work at all, nor does recovery obviously.
I can't say exactly what you are doing. Best advice I can do Re download your .zips Flash back to stock GB and try again.
-Pirate said:
About 3 months ago my screen stopped working.. So I take it in and they give me a refurb captivate, looked brand new so I didn't mind. However, when I tried to get into recovery it didn't work, the 3-button-method just wouldn't work at all, period, so I try to get it to work, gets stuck in bootloop.. pretty much every time I try to flash a rom something goes wrong and I get stuck in a bootloop but I can usually get into recovery or download mode because I had CWM.
So I'm on maxq's rom and it's working great for the past 2 months, decide not to mess with kernals or anything, however today I decided to try ICS, load it up, everything's fine, then I realize my soft keys aren't working, search for awhile, can't find anything, finally just manually start looking through the rom pages, and someone said that if you have the problem to just odin back to stock and try again.
I odin back to stock, but now 3 button combo doesn't work.. So more searching, find that I can run the 3e fix by TRusselo, doesn't work because I need root, more searching on how to root without recovery, find "SuperOneClick", root with superoneclick, then run 3e fix, everything is working fine, I check my email and load the ICS files onto SD card, go to restart and go into recovery mode.. Bricked, stuck in a bootloop, won't go to recovery, won't go to download, nothing.
Why the **** was I able to do anything I wanted with my old captivate, but if I even root this one it bricks? And what did I do to even brick it? I only ran the 2 programs and both of them worked flawlessly.
I guess my only option is to usb jig it, but honestly now I'm convinced that the phone is just faulty, I want to run the thing over.
Click to expand...
Click to collapse
Last year, I had issues with my original Cap, and got a "new" one. I learned that the bulk of the Caps going out as replacements are referbs. The one I got was a 1008 build, and does not have 3 button recovery. There are minor differences with each and every Cap that's out there. That's why some have issues with ROM's and some don't, some can over clock like crazy, and some can't at all. My guess is you have a 1008 as well, but that really doesn't matter. You just have a different device and as you seem to already have learned.
It sounds like there is more research you need to do. Even though the devices are a bit different, if you are having issues with ROM's loading, then I would say it's more of a procedure issue, than one with your device.
My procedure, is,
Remove SD/Micro SD
Odin1 Click to Stock JF6, and Master Clear(This will erase EVERYTHING)
Root with One-Click Root
Use Sideload Wonder Machine to install ROM Manager, copy update.zip and 3buttonFix to my SD, then reboot into recovery
Once in recovery I install the 3buttonFix, and install my new ROM
For me this has proven to be a very good method versus going from one ROM to another. The Master Clear cleans EVERYTHING off of your SD, so there is no chance for anything to corrupt your new install. Anytime I read a post of a install gone FUBAR, USUALLY a Flash To Stock/Master Clear (FTS/MC) fixes it
Before using Odin 1 Click, check your devices build number!! If it is higher than 1012, I would NOT recommend using 1 click, there is a higher chance of hard brick on the newer devices
Kangi...if you flash a firmware package without bootloaders, you won't have to do the 3 button fix every time. And if you keep a copy of the update.zip on your pc you don't have to even root, let alone bother with side loading ROM manager.
Cezar has a no boots jf6 and after you run that, you can still use master clear in one click.
Sounds like you got one of the refurbs that is missing the SBL. Have you looked at this thread? http://forum.xda-developers.com/showthread.php?t=1129821
I've not had this problem myself but it sounds like that might help. If I remember reading correctly, once this is flashed it should stick as long as you don't flash any other bootloaders on top of it.
Its not missing the sbl. The sbl it has doesn't respond to key combos. Derpa sherpa moment for samsung I guess?
Rofl yeah...if it was missing the sbl it would be fuggin bricked!
studacris said:
Kangi...if you flash a firmware package without bootloaders, you won't have to do the 3 button fix every time. And if you keep a copy of the update.zip on your pc you don't have to even root, let alone bother with side loading ROM manager.
Cezar has a no boots jf6 and after you run that, you can still use master clear in one click.
Click to expand...
Click to collapse
I know, thanks. I'm such a creature of habit, I started doing it like this a bit over a year ago, and has worked flawlessly for me(just jinxed myself!) so I never saw a reason to "fix what aint broke".
I'll take a look at Cezar's thanks!
Yeah, missing SBL was a poor choice of words. My bad.
kangi26 said:
Last year, I had issues with my original Cap, and got a "new" one. I learned that the bulk of the Caps going out as replacements are referbs. The one I got was a 1008 build, and does not have 3 button recovery. There are minor differences with each and every Cap that's out there. That's why some have issues with ROM's and some don't, some can over clock like crazy, and some can't at all. My guess is you have a 1008 as well, but that really doesn't matter. You just have a different device and as you seem to already have learned.
It sounds like there is more research you need to do. Even though the devices are a bit different, if you are having issues with ROM's loading, then I would say it's more of a procedure issue, than one with your device.
My procedure, is,
Remove SD/Micro SD
Odin1 Click to Stock JF6, and Master Clear(This will erase EVERYTHING)
Root with One-Click Root
Use Sideload Wonder Machine to install ROM Manager, copy update.zip and 3buttonFix to my SD, then reboot into recovery
Once in recovery I install the 3buttonFix, and install my new ROM
For me this has proven to be a very good method versus going from one ROM to another. The Master Clear cleans EVERYTHING off of your SD, so there is no chance for anything to corrupt your new install. Anytime I read a post of a install gone FUBAR, USUALLY a Flash To Stock/Master Clear (FTS/MC) fixes it
Before using Odin 1 Click, check your devices build number!! If it is higher than 1012, I would NOT recommend using 1 click, there is a higher chance of hard brick on the newer devices
Click to expand...
Click to collapse
I didn't think anyone else was going to reply to this thread, whoops.
Thank you for helping me, but I'm still having trouble.
Rom manager doesn't show up in Market, Sideload wonder machine tells me [INSTALL FAILED OLDER SDK] with any apk of Rom manager I find.
kangi26 said:
3buttonFix to my SD, then reboot into recovery
Click to expand...
Click to collapse
How do you reboot into recovery when 3buttonfix hasn't been applied yet?
This sucks and is extremely frustrating, I feel like my captivate is just trolling me.
-Pirate said:
I didn't think anyone else was going to reply to this thread, whoops.
Thank you for helping me, but I'm still having trouble.
Rom manager doesn't show up in Market, Sideload wonder machine tells me [INSTALL FAILED OLDER SDK] with any apk of Rom manager I find.
How do you reboot into recovery when 3buttonfix hasn't been applied yet?
This sucks and is extremely frustrating, I feel like my captivate is just trolling me.
Click to expand...
Click to collapse
When I get home later tonight I'll link you everything you'll need. Again, VERY important, what is your build number? If it's 1012 or higher, don't use Odin 1 click
Sent from a autonomous device
kangi26 said:
When I get home later tonight I'll link you everything you'll need. Again, VERY important, what is your build number? If it's 1012 or higher, don't use Odin 1 click
Sent from a autonomous device
Click to expand...
Click to collapse
Ok, finally got it working, I did exactly what you said, I found the rom manager 3.00.002 or whatever and that worked with sideloader, it took some messing around with but I'm running ICS now, thank you so much man, you've helped me so much, and now I can change roms and keep up to date without worrying about constantly soft-bricking.
As for my build number, I'm not sure, the only thing I see under build number in settings is: "IML74k"
-Pirate said:
Ok, finally got it working, I did exactly what you said, I found the rom manager 3.00.002 or whatever and that worked with sideloader, it took some messing around with but I'm running ICS now, thank you so much man, you've helped me so much, and now I can change roms and keep up to date without worrying about constantly soft-bricking.
As for my build number, I'm not sure, the only thing I see under build number in settings is: "IML74k"
Click to expand...
Click to collapse
The build number is actually under your battery, and looks like 10.06, 10.07, 10.08 and so on. It is the production date
Edit** And as a side note, do NOT try to use the 3buttonFix with a GB ROM, it WILL brick your phone in a really bad way. ONLY use it with 2.1 or 2.2
kangi26 said:
The build number is actually under your battery, and looks like 10.06, 10.07, 10.08 and so on. It is the production date
Edit** And as a side note, do NOT try to use the 3buttonFix with a GB ROM, it WILL brick your phone in a really bad way. ONLY use it with 2.1 or 2.2
Click to expand...
Click to collapse
Is it weird that I don't have a build number? It seems I can't post pictures without a few more posts, maybe this will work: deleted
And thanks for the warning on the 3buttonfix, I'm going to have to read more about bootloaders though, I don't understand what you and studacris were talking about earlier in the thread, haha.
-Pirate said:
Is it weird that I don't have a build number? It seems I can't post pictures without a few more posts, maybe this will work: imgurDOTcom/26sXGl.jpg
And thanks for the warning on the 3buttonfix, I'm going to have to read more about bootloaders though, I don't understand what you and studacris were talking about earlier in the thread, haha.
Click to expand...
Click to collapse
I havent seen that before, there doesnt seem to be a build#
Might want to pull that photo, it's not too good having your IMEI number publicly displayed
kangi26 said:
I havent seen that before, there doesnt seem to be a build#
Might want to pull that photo, it's not too good having your IMEI number publicly displayed
Click to expand...
Click to collapse
Maybe because it's a refurb? and whoops didn't think about that.
-Pirate said:
Maybe because it's a refurb? and whoops didn't think about that.
Click to expand...
Click to collapse
I'm not sure why, mine is a referb, and I have a sticker with mine on it. Ooh well, it is what it is
Sent from a autonomous device

SGT Hard Resets on every bootup on any ROM.

It's been quite a learning curve getting my Sprint CDMA Galaxy Tab and attempting to load every Miui, CM7/CM9 I could find on XDA and Rootzwiki. I never fully tested my tablet before beginning the delve into the flashing world so I don't know if this is an issue with the tablet itself or caused by my endless flashing trials.
I simply am unable to save any settings or data. Everytime I boot up, no matter which ROM (Miui CM7/9), it is always factory reset. This is quite frustrating.
I'm back on stock from odining Sprint EF17 GB w/ original PIT file and this is still happening. Does anyone have any idea if this was self-incurred or if there is a partitioning bug of some sort that I have missed.
Much Thanks in advance!
So every time you turn on your Tab it loads and then reboots in a continuous loop? Do you see the Android OS unlock screen or the load process does not gets so far? Because if it does not then in my opinion the boot loader is incorrect for some reason. That is my opinion.
What you can do if you suspect that the PIT is incorrect, you read your PIT and save via Heimdall and compare it with somebody else who has the same Tab as you have.
Unable to personalize "issue"
Zero_Tab_2011 said:
So every time you turn on your Tab it loads and then reboots in a continuous loop? Do you see the Android OS unlock screen or the load process does not gets so far? Because if it does not then in my opinion the boot loader is incorrect for some reason. That is my opinion.
What you can do if you suspect that the PIT is incorrect, you read your PIT and save via Heimdall and compare it with somebody else who has the same Tab as you have.
Click to expand...
Click to collapse
Negative. This is not a continuous loop bug. It is a "unable to personalize" bug. I can install market/apps/data/contacts etc etc, but every single time I boot up. it's a Fresh Copy with no personalized settings.
sounds like permission issue? Is there a fix permission in recovery?
priyana said:
sounds like permission issue? Is there a fix permission in recovery?
Click to expand...
Click to collapse
Yes I booted into CWM,fixed permissions, rebooted, put 2-3 icons on desktop, rebooted.
Nothing, it was back to factory default settings.
A permissions issue does make sense, but it didn't work and this is just mind boggling to me.
jrhsu529 said:
Yes I booted into CWM,fixed permissions, rebooted, put 2-3 icons on desktop, rebooted.
Nothing, it was back to factory default settings.
A permissions issue does make sense, but it didn't work and this is just mind boggling to me.
Click to expand...
Click to collapse
I've got the exact same problem... after reading forums for 14hrs seems like a galaxy tab thing not common at all with no real answers
Sprint SPH-P100
I'm sorry you have the same problem.
However I'm glad to have someone to share it with. Misery loves company. I've scoured the web for 3 days and have nothing.
Please if anybody knows what's going on. From my non-developer logic I need to find a way to get the changes I make to my phone to write permanently (so to speak), everything I do is temporary until I reboot.
Hmmmm... I suppose you guy's already tried to wipe all caches and reflash the kernel (= not the ROM, just the kernel) ?
Where do I find the Kernal?
It's the zImage file right?
The ROM I'm on right now is JT's CM7 here:
I wanted to try just flashing the kernal but I am unable to locate the zImage file. What directory is it in?
Edit: I found the Kernal, it's actually in the CWM 5.0.2.7 package. I'm gonna try flashing the kernal over to see if it fixes the issue.
Edit2: No cigar, reflashing kernal does not fix this issue. On a side note, I tried to upgrade to CM9 and got "Encryption Unsuccessful". Not that I am knowledgable in this, but it seems the issue may share some commonality with that.
jrhsu529 said:
Where do I find the Kernal?
It's the zImage file right?
The ROM I'm on right now is JT's CM7 here:
I wanted to try just flashing the kernal but I am unable to locate the zImage file. What directory is it in?
Click to expand...
Click to collapse
Hi,
Yah, zImage should be the kernel.
In this thread, I found something about the issue you have. It might have something to do with NoFrillsCPU... Hope this helps
dirlan2001 said:
Hi,
Yah, zImage should be the kernel.
In this thread, I found something about the issue you have. It might have something to do with NoFrillsCPU... Hope this helps
Click to expand...
Click to collapse
Eh, I just went through all 37 pages of that thread. Couldn't find anything on NoFrillsCPU and didn't see any issues that resemble mine. Was that tthe right thread? I'll do a google for nofrillscpu and see if that brings up anything.
jrhsu529 said:
Eh, I just went through all 37 pages of that thread. Couldn't find anything on NoFrillsCPU and didn't see any issues that resemble mine. Was that tthe right thread? I'll do a google for nofrillscpu and see if that brings up anything.
Click to expand...
Click to collapse
you read very fast then LOL
Anyway, my bad, it's not NoFrillsCPU but it's SetCPU ... It's in the OP : "Please DO NOT check the "Set on Boot" button in SetCPU untill you have tested it, or you may not be able to get control back without a reflash."
EDIT : Looks like there's a misunderstanding in me confused about the CDMA versions. Sounds like this thread has all the solutions you need. I may be wrong , of course...
dirlan2001 said:
you read very fast then LOL
Anyway, my bad, it's not NoFrillsCPU but it's SetCPU ... It's in the OP : "Please DO NOT check the "Set on Boot" button in SetCPU untill you have tested it, or you may not be able to get control back without a reflash."
Click to expand...
Click to collapse
I think you have my issue confused with another . My issue is that everytime I boot it's a clean boot with google account reset/desktop reset. I can't save any settings or download any apps without it getting wiped by a boot. I don't even think my ROM is currently overclocked but I'll look to see if indeed it's hiding in here somewhere.
Let me know if you see anything else that I can try :-(
Thanks though
Edit: Just checked, my system was not overcloccked and set on boot was not checked so this is definetely not the same issue.
jrhsu529 said:
I think you have my issue confused with another . My issue is that everytime I boot it's a clean boot with google account reset/desktop reset. I can't save any settings or download any apps without it getting wiped by a boot. I don't even think my ROM is currently overclocked but I'll look to see if indeed it's hiding in here somewhere.
Let me know if you see anything else that I can try :-(
Thanks though
Edit: Just checked, my system was not overcloccked and set on boot was not checked so this is definetely not the same issue.
Click to expand...
Click to collapse
LOL this is getting even more confused... while you wrote your reply, I edited my post and added this link...
Anyhow, I'm about to surrender on this, so I'm in for wishing you good luck
Bump! Bump Bump.

STUCK on Android is Updating" Starting Apps Swirl"

Okay, so now we have 3 Atrix HD's in the house and except for the unremoveable battery thing, and the short "battery life" when actively using it, I'd say we pretty much love them. However, I decided to remove some apps, etc. and managed to get my messages, camera and gallery to the "not working" and basically non-existent point. Now on startup I'm getting the Android is Updating message with the never-ending swirl of Starting Apps... I'm positive I've waited long enough as I set it down and went back to bed just to wake up and still see it.
Info - phone IS rooted
running the "jellybean" update
Unfortuanately a couple weeks ago, I UNCHECKED the sync photots for both facebook and gmail, so there are pictures I really don't want to lose.....
I'm definitely not a "pro" like lots of them up here, but am capable of following directions. I'm pretty sure I have to "unroot" my phone via USB/SD card through my laptop....Any help would be greatly appreciated... and the more specific the directions the better!! :cyclops: LOL... Thanks so much.
/COLOR]
Sounds like you deleted a critical OS file. You need to flash back to stock again. Is your boot loader locked or unlocked?
Don't remeber...
ai6908 said:
Sounds like you deleted a critical OS file. You need to flash back to stock again. Is your boot loader locked or unlocked?
Click to expand...
Click to collapse
I Don't rememer if I unlocked the bootloader. Is there a way to check? Thanks.
Follow what's in the website to reload your stock image...
http://www.andromods.com/tips-trick...-qinara-stock-original-firmware-fastboot.html
ai6908 said:
Follow what's in the website to reload your stock image...
http://www.andromods.com/tips-trick...-qinara-stock-original-firmware-fastboot.html
Click to expand...
Click to collapse
I've been trying and I've fallowed everything to the T but everytime it says it falls.
I'm not sure...I have used it before and was able to restore...are you sure it's not a hardware issue?
Sent from my HTC_Flyer_P512_NA using xda app-developers app
Okay, here's where we're at.... it is no longer frozen on that screen and goes thru the setup w/ my gmail, etc.... but then I have a black screen (except for the top row icons...). I can pull down the settings menu and see everything there, but I have no "homescreen"....It's black. It seems like we're in the right direction and I know it's not dead. Anything??
Also wanted to thank you for the help. This place is ALWAYS amazing....
Hey, my son and I are wondering since it's already running 4.1.1 and we can't downgrade, what about flashing a custom rom? Will that flash a totally complete, full home page and everything?? Just a thought.
While trying to search for answers I came across a "xoom forums??" post with a tablet that was doing exactly the same thing....multiple people had that problem, but doesn't seem to have been answered...... not sure if I'm suppose to post links to that or not, but at least I know I'm not alone.....
If you're rooted, than I'm assuming ADB debugging is on. You should be able to unlock your boot loader and load CWM recovery. From there you can wipe cache and dalvik cache. If that doesn't help, you can reflash a stock ROM zip from Skeevys thread. Flashing a zip won't touch your SD card
There is official 4.1.1 available...you can try flashing that...you dont need to downgrade.
Okay, my son installed safetystrap (whatever that is...lol) and when you click Operating system, it says "there is no operating system installed are you sure you want to reboot????
Is this fixable?
Note: We have two other identical Atrix HD's in the house if that helps for any reason.....
Well that's what we are trying to figure out is how to install OS...Lol..
Try install system using fastboot... Look for skeevedudes guide...its in this forum somewhere...
Sent from my MB886 using xda premium
LOL....okay, so do yoiu see why my son says I'm not "ALLOWED" to have a rooted phone if this happens again..... Guess I was just glad to SEE it written out, so that it's a little more def what's going on - but I'm sure everyone up here (except me) already knew that!!!
He's not around today, so my phone is just "sitting" saying "creating rom slot" but never gets off that screen. The good thing is that we can see it's actually charging and we weren't sure before....... Does this sound like something that will eventually be repairable??
You have a soft brick...yes it is fixable...
Okay, thought I had already posted this before but I guess I never hit the submit ....
Before safety strap was installed, we could get the phone (minus the homescreen and os) to come on....the settings, wifi etc.....No we can't seem to get to that point with the safetystrap on. It just goes completely blank and won't let safestrap connect to the computer via usb.
Apparently there is also no way to remove SS without an opperating system. This doesn't sound promising.....ugggg..... I so want my phone back.
Any help would be greatly appreciated.
OK dude. Follow my instructions.
Hold down power and both volume buttons all at once until the phone screen turns black, then continue holding the volume buttons. You will get a menu. Go to AP fastboot mode using the volume down button, select it with the volume up button. Plug your phone into your computer with a data cable. Download RSD lite and the MOTOROLA drivers from the MOTOROLA website. Install both. Download the 4.1.1 sbf file for your phone, there is a thread for it here in the AHD forum. Its a zip file, extract it to your desktop. Open RSD lite, click the browse for file button, select the XML file inside the folder you just unzipped. Hit flash. If you get any errors, let me know I'll send you a different XML file with the getvar lines removed.
Okay, will get it started..... Thanks so much. My son has been working on this for hours and hours. You have no idea how much I appreciate this place and everyone who helps out!! You guys rock! Will let you know what we get.
Here is the website for what youngunn mentioned...
http://www.andromods.com/tips-trick...-qinara-stock-original-firmware-fastboot.html
[FONT="Comic [SIZE="3"]Okay, my son (BlackestPain) is too new here to post the picture links, so I copied and pasted. They're just downloads from his camera pictures. This is where we are right now after following suggestions....[/SIZE]MS"][/FONT]
Okay, here is what I've (chixwithkidz5' son) tried.... Please cut me some slack because I haven't been doing this stuff long....
Getvar file
Getvar removed
RSD Lite connected
RSD Lite failed
\
***** this is what the phone reads after everything
What am I missing ? Thanks - I can use all the decent help I can get.

[Q] Samsung Galaxy S GT-i9000 freezes after around 30 seconds from reboot.

Hello everyone, thanks for taking your time and reading this.
I've owned a Samsung Galaxy S GT-i9000 for about two years now. This phone is not my primary phone, as I just use it as a secondary phone for different apps/backup, most of the times the phone is turned off.
But a few days ago, I turned the phone on, and once the homescreen had loaded, around 20-30 seconds later, the phone will freeze, and there's nothing else you can do other than take the battery out to turn it off.
A few details about the phone: the phone has never been flashed, and the OS has never been touched. It's basically at stock, but the only thing I remember is updating the official firmware through the Samsung link in the settings. The phone has never been modded, and that's what bugs me the most. (I've never had experience with 'modding' phones with custom ROMS and such)
So, after sitting at home all day looking for a fix, I couldn't find anyone else in my situation. There are a few similar situations, but I am yet to find something that replicates my problem exactly.
I've also tried rebooting the phone in many different ways, for example, taking out the memory card, then taking out the sim card, then taking them both out completely.
That's when I found a link which gave me information on how to factory reset the device. Since nothing else was working, I decided to go for it.
I held the VOLUME UP button + the HOME button, and hit the power button and got the menu up.
The menu works fine, I was flicking through the options for 10 whole minutes just to check if it freezes or not, and it works perfectly fine.
So then I factory reset the phone, wiped the system cache, and I also formatted the internal SD card.
Still, the problem persists. This time, the phone will reboot for a little while longer, since I expect the system files are getting set up, then it asks for the language, and before I can hit English, it freezes, and the screen stays like that until the battery is dead. All the hardware buttons don't do anything, it's basically fully dead with the screen still on the OS menu.
I was wondering if anyone knows what I should do?
I can provide more information if needed, and I can even upload a video to YouTube if you want a better aspect of the problem.
Any help is appreciated, thanks.
is it i9000 or 9100?
Sent from my GT-I9000 using xda premium
compacity said:
is it i9000 or 9100?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Ah, sorry, got the title completely messed up there.
Yes it's the GT-i9000 and I think it had Froyo 2.2.1, forgot to include that in the main text.
Could try Rooting the phone and wiping all options in Recovery and Reboot
or
Could be that something maybe corrupted which is halting the system
Upload a video so that we can offer better advice
Which Rom / Firmware are you using?
Last option.
Would Recommend Downloading Rom (whichever you choose) and go from there....
Major UPDATE:
Okay, so after sticking at it the whole day and trying to get a better understanding of this situation, I've managed to work around the problem slightly. It's not fixed yet, though.
So after the screen had frozen for the (insert number here)th time, the battery was starting to go empty, so I stuck it on charge, but I forgot that I had left the frozen screen on (currently frozen on the 'Language Select' set up menu).
After about 20 minutes, the phone vibrated and a little message popped up, and it said that 'the process Soundhound.com.xxx.xxx was force closed', or something along the lines. I can't remember fully because it popped up for only around 4 seconds and disappeared.
As soon as I saw that, I quickly went to the application settings and deleted all of the soundhound cache/data and then removed the app completely. After that I thought it was fixed for sure, so I was messing around with the phone and using different apps to see if it freezes again, and it didn't.
But I had to restart the phone to see if the freeze issues happened again, and yep, it was there again, this time the same as the first issue, where it used to freeze up in the home screen. AND, I let it sit on the frozen screen for 15 minutes and it was that SAME soundhound app that got force closed, so once it got out of the frozen state, I quickly went to the application settings and the app was still there, it was like I didn't even delete it?
This leads to my new problem, the so called 'hard factory wipe/reset' doesn't actually reset EVERYTHING. As seen in my other post: http://forum.xda-developers.com/showthread.php?t=2305825
Now I'm completely confused as to what I should do.
I've pretty much tried everything, and i'm sure a FULL hard reset where EVERYTHING gets wiped out might just fix it? The thing is though, I don't know how? I've been trying to fix this phone for about 7 hours straight now.
My opinion Flash a Stock Rom or what ever you wish and then Root it...
If selling it just dont bother with Rooting it.
As you say you have been at it for Several hours and flashing takes less than an hour even for a newbie if following the procedure correctly
As going by what you say it seems that files are messed up on the phone and better to start fresh
ywasaf acquitted
EwOkie said:
My opinion Flash a Stock Rom or what ever you wish and then Root it...
If selling it just dont bother with Rooting it.
As you say you have been at it for Several hours and flashing takes less than an hour even for a newbie if following the procedure correctly
As going by what you say it seems that files are messed up on the phone and better to start fresh
Click to expand...
Click to collapse
Is there a legit way to flash it, maybe through Samsungs website? I don't want to mess around with custom files, as I would like to keep everything clean.
Oh, and also, I just went through the media files and found some of my old pictures too. So for some reason, the 'format internal SD' option in the recovery menu isn't working.
If I flash it, will I have to flash it to Froyo 2.2.1 which it is currently in right now?
Here's information I found on the 'About phone' menu:
Kernel version:
2.6.32.9
[email protected] # 1
Build number:
FROYO.XXJPY
Baseband version:
i9000XXJPY
Thanks for all the help so far.
Legit way your on XDA!
Flash a Stock 2.3.6 (Clean) which is the same as Samsung Site its in my How to Guide if you wish to follow it
Its the exact same Rom just not on there Site
EwOkie said:
Legit way your on XDA!
Flash a Stock 2.3.6 (Clean) which is the same as Samsung Site its in my How to Guide if you wish to follow it
Its the exact same Rom just not on there Site
Click to expand...
Click to collapse
Thanks.
Briefly read your guide, and it's all mind boggling to a newbie like me :silly: lol
I might just have to flash it, because this problem is getting a little bit annoying now.
Which parts of your guide should I follow exactly? And shouldn't I be sticking Froyo 2.2.1 back in? Won't a newer firmware (such as the 2.3.6) make the phone slower/drain more battery than usual?
Oh and one last thing, what's the difference between rooting and flashing a phone? Cheers.
Rooting briefly means :
Giving yourself root access to system files and the ability to change things that normally are marked read only
This allows you to change all kinds of things that normally you wouldn't be able to
Flashing : Erm.. Flashing a new Rom on your Phone or the process of over-writing your internal memory
2.3.6 will be ok for you if you wish to stay just Stock on your phone.
Plus the fact if you wish to move to another Rom later on its just a matter of Rooting the Phone and installing the Custom Rom
Just follow guide from the : HOW TO GUIDE : TUTORIAL TO FLASH 2.3.6 JVU + ROOT BEFORE INSTALLING CUSTOM ROM
and you will be ok.
EwOkie said:
Rooting briefly means :
Giving yourself root access to system files and the ability to change things that normally are marked read only
This allows you to change all kinds of things that normally you wouldn't be able to
Flashing : Erm.. Flashing a new Rom on your Phone or the process of over-writing your internal memory
2.3.6 will be ok for you if you wish to stay just Stock on your phone.
Plus the fact if you wish to move to another Rom later on its just a matter of Rooting the Phone and installing the Custom Rom
Just follow guide from the : HOW TO GUIDE : TUTORIAL TO FLASH 2.3.6 JVU + ROOT BEFORE INSTALLING CUSTOM ROM
and you will be ok.
Click to expand...
Click to collapse
So the 2.3.6 Firmware you provide, is that known a 'custom firmware'?
I've been searching for YouTube videos with people explaining how to flash, but all the videos sound like they're speaking about some rocket science sh** lol
Now I'm super confused, some guy on YouTube is flashing to 2.3.6 JVT while you're doing JVU, I don't even know what that means haha
I just don't want to brick the phone and make it completely dead, that's why I'm just making sure I understand the basics before I go ahead with it, sorry if I'm starting to sound annoying lol
You wont brick it if you follow it correctly...
2.3.6 JVU is the basis for all custom roms been flashed unless stated otherwise by Rom Developers.
As its basically a stock 2.3.6 then when you want to flash another Rom its just a matter of Rooting the 2.3.6
EwOkie said:
You wont brick it if you follow it correctly...
2.3.6 JVU is the basis for all custom roms been flashed unless stated otherwise by Rom Developers.
As its basically a stock 2.3.6 then when you want to flash another Rom its just a matter of Rooting the 2.3.6
Click to expand...
Click to collapse
Ah, okay.
Well, I'm in the process of downloading your files, THANKS for ALL the help you've given so far, sir!
I'll flash once all the files are downloaded. By the way, does 2.3.6 have Google Play store, and not the old Andropid Market?
I hope I can get this done before I head off to sleep in a few hours, been a very long day haha
I'll let you know of the results, cheers and have a good day sir.
No problem hope it all works out for you :good:
Not sure if Google Play is on it as its 2.3.6 Stock ...just upgrade it if possible
EwOkie said:
No problem hope it all works out for you :good:
Not sure if Google Play is on it as its 2.3.6 Stock ...just upgrade it if possible
Click to expand...
Click to collapse
why is it i cant see ur online status? is my app ...... nevermind that.
Sent from my GT-I9000 using xda premium
---------- Post added at 05:14 AM ---------- Previous post was at 05:13 AM ----------
f2k8 said:
Ah, okay.
Well, I'm in the process of downloading your files, THANKS for ALL the help you've given so far, sir!
I'll flash once all the files are downloaded. By the way, does 2.3.6 have Google Play store, and not the old Andropid Market?
I hope I can get this done before I head off to sleep in a few hours, been a very long day haha
I'll let you know of the results, cheers and have a good day sir.
Click to expand...
Click to collapse
GOOD LUCK N MAY LADY LUCK ON UR SIDE WHILE FLASHING
Sent from my GT-I9000 using xda premium
EwOkie said:
No problem hope it all works out for you :good:
Not sure if Google Play is on it as its 2.3.6 Stock ...just upgrade it if possible
Click to expand...
Click to collapse
Back again, haha.
I was just wondering, did you say I should root or not? As rooting it seems like a bit of a hassle? Plus, it says that I should install a custom rom zip file if I decide to root it, but I don't have one? I am using your 2.3.6 which was in your Odin Files download link, right?
So if I root, what do I do exactly?
compacity said:
why is it i cant see ur online status? is my app ...... nevermind that.
Click to expand...
Click to collapse
Hiding from the Tax Man :laugh:
Rooting takes 15 seconds to do
EwOkie said:
Hiding from the Tax Man :laugh:
Rooting takes 15 seconds to do
Click to expand...
Click to collapse
Okay, so I've rooted it also now, and unplugged the USB.
Now it's restarted, and the language set-up page is there, and guess what? .. It froze again :|
Exactly the same way before I flashed it :crying: :crying: lol
I actually feel like crying right now haha, I think the phone may be completely dead? Something is seriously corrupt with it I'm guessing?
I've never dropped it, or accidentally dropped liquid on it or anything like that.
I have absolutely no idea what to do now. Sigh.
Thanks for your help either way though.
can you upload a video on whats happening?
EwOkie said:
can you upload a video on whats happening?
Click to expand...
Click to collapse
how bout activate repartition?
Sent from my GT-I9000 using xda premium
---------- Post added at 05:49 AM ---------- Previous post was at 05:48 AM ----------
EwOkie said:
Hiding from the Tax Man :laugh:
Rooting takes 15 seconds to do
Click to expand...
Click to collapse
so thats why, i thought my app got error.
Sent from my GT-I9000 using xda premium

Categories

Resources