I've updated my nook HD+ to 'Nightly CM 10.2 ver. 9/13' then it has a problem now.
It can't normally boot. It was totally slow with cynogen boot screen.
so, I tried to flash former rom but I couldn't do it. I could see same situation after flashing other roms.
I tried to format emmc partition via cwm recovery but I also couldn't.
I don't know what happen with my nook. Please help me.
Related
My nook hd+ is stuck in the cm10.1 bootloop
CWM says error mounting /data
I believe this is from doing a "format /data" when flashing a new rom, which I now believe I wasn't supposed to do..
Anyway,
I'm trying to find the factory.zip that leapinlar is referring to in this thread: http://forum.xda-developers.com/showthread.php?t=2090817
dykim5 said:
My nook hd+ is stuck in the cm10.1 bootloop
CWM says error mounting /data
I believe this is from doing a "format /data" when flashing a new rom, which I now believe I wasn't supposed to do..
Anyway,
I'm trying to find the factory.zip that leapinlar is referring to in this thread: http://forum.xda-developers.com/showthread.php?t=2090817
Click to expand...
Click to collapse
The factory image is on a partition on emmc. But you will probably not find it. You were supposed to format /data. That is not the issue. You may be subject to the emmc bug.
You can try going to my HD/HD+ CWM thread linked in my signature and read item 6. It has a CWM flashable zip for stock.
Sent from my Nook HD+ running CM10.1 on emmc.
I'll try that.
What happened was that I had an earlier version of cm10.1 from early July and I flashed the latest cm10.1.
Everything was working fine. So I rebooted into CWM to make a backup and deleted the old backup and rebooted.
That's when the bootloop started.
btw, thanks for helping me out.
I'm hoping that reverting back works!
Thanks Leapinlar!
My nook is back to cm10.1.
I followed your advice - after flashing the stock rom and several boots, the nook screen came up with a loading bar, I'm guessing to repair damaged files.
Then I went back to CWM, flashed cm10.1 and gapps, created a backup, and now my tablet is up and running.
Thanks again for you help
Hi,
I installed CM10.2 on my Nook HD+ but left the stock recovery on. I figured that it would help to reinstall the stock rom if something goes wrong.
Is there a way to install CM10.2 updates on my tablet without removing the stock recovery. The sdcard-based CWM worked on the stock rom but it no longer works on CM10.2. I have tried a couple of recoveries but none of them worked.
Do I have to install a custom recovery on EMMC to be able to do updates? If so, how can I install the custom recovery after installing 10.2?
Any help would be appreciated.
excalibar001 said:
Hi,
I installed CM10.2 on my Nook HD+ but left the stock recovery on. I figured that it would help to reinstall the stock rom if something goes wrong.
Is there a way to install CM10.2 updates on my tablet without removing the stock recovery. The sdcard-based CWM worked on the stock rom but it no longer works on CM10.2. I have tried a couple of recoveries but none of them worked.
Do I have to install a custom recovery on EMMC to be able to do updates? If so, how can I install the custom recovery after installing 10.2?
Any help would be appreciated.
Click to expand...
Click to collapse
Just follow the "Make the CWM sd" guide from here .It works for the cm emmc install also.
Also why would you not flash custom recovery? If something goes wrong or if you want to go back to stock you could just flash the factory stock ROM from the cwm SD you made. You can get it from the same thread.
excalibar001 said:
Hi,
I installed CM10.2 on my Nook HD+ but left the stock recovery on. I figured that it would help to reinstall the stock rom if something goes wrong.
Is there a way to install CM10.2 updates on my tablet without removing the stock recovery. The sdcard-based CWM worked on the stock rom but it no longer works on CM10.2. I have tried a couple of recoveries but none of them worked.
Do I have to install a custom recovery on EMMC to be able to do updates? If so, how can I install the custom recovery after installing 10.2?
Any help would be appreciated.
Click to expand...
Click to collapse
The same CWM SD you used to flash CM10.2 should still work with CM10.2 installed on emmc. You must have somehow modified the original SD. Try making the SD from scratch again. You can keep stock recovery on emmc if you want so that you can easily reset to stock if you want.
But once you have that SD working you can still flash the CWM or TWRP zip to emmc with it, along with the updated CM you wanted to install.
Sent from my Nook HD+ running CM10.1 on emmc.
Hi guys,
I have bought the Nook HD+ and I tried to install CM 10.1 to the Nook by following this one
1. restore the CWM img to the micro SD ( my own is 16Gb one )
2. I did not make a backup in CWM ( the guide didn't say so and Im just a newbie of Android ). After that, I did install CM 10.1 ( downloaded from homepage) zip file, also Goo Apps as well.
Kind of simple one. Now my nook jsut boot in CM 10.1 with the logo and staying at this stage ( without micro SD card). In case I keep the micro SD card inside the Nook, it just continue booting into CWM. I did not do any format option in CWM. Did I make any mistake? What can I do now?
You must do a factory reset with CWM after installing CM10.1. You need to get rid of those stock settings.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
You must do a factory reset with CWM after installing CM10.1. You need to get rid of those stock settings.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
yep! the problem is even when I choose to install from zip file then I did wipe all setting, clear cache. I still cannot boot into CM 10.1 Now I just can boot into CWM. What can I do now?
I just did it successful. Thank for your supporting
:laugh:
My Nook HD+ keeps rebooting to my EMMC recovery (currently CWM 6.0.4.6) no matter what I try. It all started with a botched CM11 install from a while back. Since then I've tried installing CM11 M8 and CM10 RC2 through both the emmc recovery and the bootable sd card recovery. Even when the install goes smoothly, my Nook will just reboot back into whichever recovery I have installed.
Not sure what the problem is but would really appreciate any help. Thanks!
riceknight said:
My Nook HD+ keeps rebooting to my EMMC recovery (currently CWM 6.0.4.6) no matter what I try. It all started with a botched CM11 install from a while back. Since then I've tried installing CM11 M8 and CM10 RC2 through both the emmc recovery and the bootable sd card recovery. Even when the install goes smoothly, my Nook will just reboot back into whichever recovery I have installed.
Not sure what the problem is but would really appreciate any help. Thanks!
Click to expand...
Click to collapse
You need to go to my HD/HD+ CWM thread linked in my signature and make a new bootable CWM SD per item 1a and use that to flash a plain stock zip from item 6, followed by a system reset with CWM. That should get you going again and you can start over.
Sent from my SM-T900 using XDA Premium HD app
I got the similar problem on my nook hd (version : CM10.1). Someday, it automatically upgraded and i interrupt it, then a tragedy comes. It always get into cyanboot and recovery 6.0.4.6 when i rebooted. And i try flash newer CM, but it always reboot. Then i try many ways during several days.
When i just wanted to give up, the miracle showed. My nook was connected on PC with internet, the screen is stuck on cyanboot as usually. Then new screen pop up to ask me set language.
I quickly flash recovery, CM11 and google market. In this time, recovery 6.0.4.6 was worked but i didn't why and how. BUT when i reboot it, it still went into cyanboot and recovery 6.0.4.6. In recovery menu, i try advanced-->reboot to bootloader. Yes, i got into new CM11 :crying:
Now, although my nook get into recovery 6.0.4.6 when it rebooted, but tap advanced-->reboot to bootloader, which get 100% into CM11.
It really a tough work, and i still don't know how i solve it~~
See this thread http://forum.xda-developers.com/showthread.php?t=1444630 for an explanation of one common (but not the only possible) cause of the "recovery boot loop" problem. Although it was written for the Nook Tablet, the same mechanism also applies to the Nook Color, Nook HD/HD+.
For the Nook Tablet (not HD/HD+), there is a flashable_fix_bootloop.zip created by XDA developer succulent (and posted at his Blog http://iamafanof.wordpress.com/2013...-1-jellybean-sdcard-img-for-nook-tablet-0110/) that can be flashed (using CWM/TWRP) to reset the two files BCB and BootCnt and thereby getting the NT out of the recovery boot loop condition; with a little tweak this tool can be adapted for use with another Nook device type such as HD or HD+.
So, I was running the latest CM snapshot on my Nook HD+ and decided that I wanted to have TWRP instead of CWM as my custom recovery. I downloaded the latest TWRP img and flashed using Flashify. I rebooted and now it's stuck on the 'Nook' boot screen and doesn't progress. I can't boot into recovery or the OS. What should I do?
Apologies in advance for my naivity!
Okay, more details. Tried to run CWM recovery from a bootable SD card (as per instructions on another thread). With the SD card in the Nook won't even power on (black screen). Have a bricked it?
Solved! Tried a different SD card and was able to boot recovery and reinstall the ROM.
Was feeling like Samuel L Jackson (ie a bad mother f*cker) and tried to flash TWRP again, this time using Rashr, and it worked fine. Hope this helps someone!