Database Develop

[Think Tank] Improve 3D Performance

Any ideas on how to improve 3D performance on the G1? I am talking about changing things in the kernel/firmware to make 3D games run a little smoother. My favorite game on android is raging thunder 2, and it runs fine for the most part until more then one car gets on the screen. At that point it starts to lag alot. I know it was designed for faster hardware but with some mods we can make it better.
My setup:
CM based 2.6.34 kernel with BFS
Cyanogen 5.0.8 test4
No sound
All tasks killed before the game starts.
Overclocked at 691 min/max (Universal overclock, and always plugged in)
Any ideas?

One, stop killing tasks.
I'm curious if there's a way to assign more RAM to 3d. Hence a... reverse RAM hack?

r3s-rt said:
One, stop killing tasks.
I'm curious if there's a way to assign more RAM to 3d. Hence a... reverse RAM hack?
Click to expand...
Click to collapse
I use the running services section under settings to kill tasks. I haven't used a separate app taskiller since my donut days. Now the reverse RAM hack seems like a good idea, but wouldn't general phone performance suffer because of that?

Ah. Smart man on the killing tasks then.
Hmm... Probably? I usually go with about 18 free... never under 10... But that's ME. Maybe giving it 5mb more? That's a ~50% increase of the original 10.7MB reserved for it. The question here is how? I'm sure it can't be too hard.

the funny thing is dude, you dont mean to boost ur GPU as everything is integrated. when it comes to lag u'd usually resort to OCing the processor. i normally stick to RT1. RT2's requirements are 700Mhz and I dont know if i wanna put ma poor G1 through that - i have a hard enough time trying to get speedforge to work propperly

Vylle said:
the funny thing is dude, you dont mean to boost ur GPU as everything is integrated. when it comes to lag u'd usually resort to OCing the processor. i normally stick to RT1. RT2's requirements are 700Mhz and I dont know if i wanna put ma poor G1 through that - i have a hard enough time trying to get speedforge to work propperly
Click to expand...
Click to collapse
How could I have forgotten about overclock?!?! I'm one of the lucky ones my phone will boot at up to 710 Mhz for a good 30 seconds and I'm perfectly stable at around 652 Mhz. RT1 runs a lot smoother but it has a lot worse graphics. RT2 actually runs fairly well most of the time with the sound off when clocked at 528 so I dunno.

Yeah so I played with overclock some and I'm getting amazing results. When playing 3D games I've got my cpu clocked at 710 max/min and I am getting absolutely no slowdowns. My neocore benchmark is at 30.2 fps now, way higher then stock cyanogen's 22.5 ish scores. I haven't played with overclock since the universal overclock first came out and now my phone seems to be a lot more stable at higher frequencies then it was before. It's gonna kill my battery, but I'll just play with the phone plugged in lol. Problem is solved, but I'm still open to any 3D improving suggestions.
EDIT:I still get a few random reboots, specially if the phone has been idle, but performance is amazing.
EDIT2: I'm gonna have to eat my words....710max/min might have been too aggressive. Sometimes it reboots completely, sometimes it just exits out of the game. Until I posted on here I was having amazing results but a slower clock is more reasonable...I'll go with 691 max/min=p

Choppy/Framerate Issue When Gaming?

Hello, everyone.
Thought I'd take this question to XDA, since I'm unsure if I have a defective unit or not.
I have a HTC One (obviously) and it's stock, unrooted 4.1.2, running the latest 1.29 update. But when playing some games, I've noticed that ever 2 or 3 seconds, I'd get some sort of...frame jump, or random choppyness when playing. It's not framerate lag as far as I can tell, and when running benchmark tests, they appear to be fine.
The games I have tried where I can see this issue are:
-Mini Motor Racing
-Ski Safari
-Temple Run 2
I don't game that often, but these are the games I mainly play when I do. I know that not all CPUs/GPUs are made equally, so some people may not have this issue, but some *hopefully* might.
But as I say, when I run an AnTuTu benchmark and watch the GPU benchmarks, I see no jitter or jumping.
I'm wondering if I have a defective GPU or not, and just wanted to see if people are in the same situation as me.

It could be that 4.1.2 doesn't have optimized GPU drivers for the Snapdragon S4 processor. 4.2.2 runs games like butter, but I think the GPU got a speedbump on that OS. I know you said your on stock, but try applying a custom kernel like from Faux, and see if it makes a difference, maybe OC the GPU a bit.

nintendolinky said:
It could be that 4.1.2 doesn't have optimized GPU drivers for the Snapdragon S4 processor. 4.2.2 runs games like butter, but I think the GPU got a speedbump on that OS. I know you said your on stock, but try applying a custom kernel like from Faux, and see if it makes a difference, maybe OC the GPU a bit.
Click to expand...
Click to collapse
Interesting...I didn't know that, I'll definitely give a custom kernel a try. Thanks

Nitroz said:
Interesting...I didn't know that, I'll definitely give a custom kernel a try. Thanks
Click to expand...
Click to collapse
It's not about drivers, it's about heat throttling. HTC somehow decided that when the CPU hits 40 degrees everything should slow down to keep below that target. Which is bonkers considering many countries have ambient temps of 30+, and the speed of the monster in the One. With custom kernels you can adjust this setting and to delay the throttling.

ArmedandDangerous said:
It's not about drivers, it's about heat throttling. HTC somehow decided that when the CPU hits 40 degrees everything should slow down to keep below that target. Which is bonkers considering many countries have ambient temps of 30+, and the speed of the monster in the One. With custom kernels you can adjust this setting and to delay the throttling.
Click to expand...
Click to collapse
That explains it then. Thanks.

ArmedandDangerous said:
It's not about drivers, it's about heat throttling. HTC somehow decided that when the CPU hits 40 degrees everything should slow down to keep below that target. Which is bonkers considering many countries have ambient temps of 30+, and the speed of the monster in the One. With custom kernels you can adjust this setting and to delay the throttling.
Click to expand...
Click to collapse
Just another question, do you experience this issue as well?

Nitroz said:
Just another question, do you experience this issue as well?
Click to expand...
Click to collapse
Everyone does if it hits 40c ElementalX kernel allows it to hit 55c with the Run Hot option I believe

ArmedandDangerous said:
Everyone does if it hits 40c ElementalX kernel allows it to hit 55c with the Run Hot option I believe
Click to expand...
Click to collapse
Thing is, when the phone is cold and below temps and I start a game, it's still pretty jumpy. So I don't think it's that.

I got the same problen..

Tegra Overclock OUYA Edition is finally here :)

What this app is gonna do?
This will give you some boost that is really required to play games that are demanding on GPU front.
What this app require?
You need to be ROOTed and for that there is a really great app with one touch facility available! The link is http://forum.xda-developers.com/showthread.php?t=2387507
After you get ROOTed just install the Tegra Overclock OUYA EDITION app from attachment and click on OK for one click optimization.
You can also change the actual resolution to somewhat lower to again get a massive boost in GPU intensive games or shall I say those games that scale with GPU clocks very well. (I can confirm nearly 2X boost in RipTideGP2 with all settings maxed out when comparing with 1080p to 720p option provided in the app :laugh
Any kind of hazardous warning before use?
If anything goes wrong then you know where the power switch is! Close the console and cut the power and start again. We have not implemented the on Boot settings for safety reasons...
What about future updates?
I just wish that 4.2.2 gets for the OUYA and that will be a game changer for the console as that support full screen scaling on resolution changing vs screen compensation provided by current android 4.1 version....
NOTE: The app is fully free to use one click solution for OUYA owners and don't require you to get involve in any of cracking stuff Still the app does costs us in development and support front so any kind of donation will be greatly appreciated. If you are planning to buy any Tegra device in future then you can support us by purchasing the original Tegra Overclock app from the market that will in turn benefit you as well..
BTW don't forget to hit the thanks button
EDIT: Version 1.1 Change log
*Nothing new just made the interactive governor as a default rather than performance governor due to heating concern.
*Checked the code so that 2D GPU is set to 520 MHz too, in case it still reports half let me know..
EDIT: Version 1.2 Change Log
***Added requested LBCMT (LastBootCpuMaximumTemperature!) This shows the maximum temperature your device went during last boot.
***Added apply on boot (Works only when the USB device with at least a single file is detected to ensure you don't intentionally mess up anywhere )
The LBCMT will works as soon as you boot once after you open the app for the first time. Also note that YOU SHOULD NOT KILL THE APP manually by task killers or the reporting will be fake. BEWARE....
EDIT: Version 1.3 Change LOG
***Full screen stretched resolution support for CM11 Rom users. Use the special newly added resolution (will only work for CM users currently as no other 4.3 or 4.4 Roms available)
Fixes for temp not showing on custom kernel like EPRJ Kernel.
Thank you for being patient.

Kingshoo said:
What this app is gonna do?
This will give you some boost that is really required to play games that are demanding on GPU front.
What this app require?
You need to be ROOTed and for that there is a really great app with one touch facility available! The link is http://forum.xda-developers.com/showthread.php?t=2387507
After you get ROOTed just install the Tegra Overclock OUYA EDITION app from attachment and click on OK for one click optimization.
You can also change the actual resolution to somewhat lower to again get a massive boost in GPU intensive games or shall I say those games that scale with GPU clocks very well. (I can confirm nearly 2X boost in RipTideGP2 with all settings maxed out when comparing with 1080p to 720p option provided in the app :laugh
Any kind of hazardous warning before use?
If anything goes wrong then you know where the power switch is! Close the console and cut the power and start again. We have not implemented the on Boot settings for safety reasons...
What about future updates?
I just wish that 4.2.2 gets for the OUYA and that will be a game changer for the console as that support full screen scaling on resolution changing vs screen compensation provided by current android 4.1 version....
NOTE: The app is fully free to use one click solution for OUYA owners and don't require you to get involve in any of cracking stuff Still the app does costs us in development and support front so any kind of donation will be greatly appreciated. If you are planning to buy any Tegra device in future then you can support us by purchasing the original Tegra Overclock app from the market that will in turn benefit you as well..
BTW don't forget to hit the thanks button
Click to expand...
Click to collapse
now a simple question....can you tell me which options i need to use for get a best performance in ouya games and emu?

This app has a one click solution (found in the op). All you need to do is click the button and your ouya is optimized. The op already has this information.
On another note, this app rocks. Thank you.

Awesome, finally the OUYA version, im about to jump on this right now and give it a spin!!!:good:

darkknight1812 said:
This app has a one click solution (found in the op). All you need to do is click the button and your ouya is optimized. The op already has this information.
On another note, this app rocks. Thank you.
Click to expand...
Click to collapse
i asked before install...now i saw it very nice and user friendly

.. one click optimization .. nice job .. cheers

sasuke1981 said:
now a simple question....can you tell me which options i need to use for get a best performance in ouya games and emu?
Click to expand...
Click to collapse
Just Press the OK button and wait a few seconds as the settings getting applied. After that Run your Emulator Games and you should notice a difference . Note that Resolution options also cuts the screen area so use them only if a game is unplayable!

is there no way to allow users to set advanced profiles so that they can configure a medium and max overclock setting?
i saw the temps on my core rise up pretty quickly just from fiddling with the UI, not sure if I want to subject this little guy to that much abuse with no really efficient cooling solution under the hood.

Careless_ said:
is there no way to allow users to set advanced profiles so that they can configure a medium and max overclock setting?
i saw the temps on my core rise up pretty quickly just from fiddling with the UI, not sure if I want to subject this little guy to that much abuse with no really efficient cooling solution under the hood.
Click to expand...
Click to collapse
it's understandable for the lil guy to get hot quickly when you are overclocking the GPU+CPU, can't expected to run cool unless you put a better cooling fan into you console, i don't mid my ouya running a lil hot, well mines don't get hot enough cause my ouya got a acrylic custom shell with enough vents and airflow that keeps my console way cooler then the ouya stock/factory shell...

its obvious that it would run hotter if the clock speed is higher. no one is disputing that. i just don't see how not allowing the user to specify speed as much of the other CPU overclocking programs like SetCPU allow the user to do.
It's a needed feature IF it can be supported and implemented.

Excellent!
I'll give this a bash tonight and see what improvements there are!

Careless_ said:
is there no way to allow users to set advanced profiles so that they can configure a medium and max overclock setting?
i saw the temps on my core rise up pretty quickly just from fiddling with the UI, not sure if I want to subject this little guy to that much abuse with no really efficient cooling solution under the hood.
Click to expand...
Click to collapse
Actually Temperatures are no problem for this chip as it can bear temperatures of 70 C with great ease as the manufacturer mentioned. Don't worry about that also let me know if they are above this temperature so that we can do something about that. If you ask me I am comfortable with 85C as that is what the throttle temperatures (Default mind you!). Just Relax and crush the games already

Careless_ said:
its obvious that it would run hotter if the clock speed is higher. no one is disputing that. i just don't see how not allowing the user to specify speed as much of the other CPU overclocking programs like SetCPU allow the user to do.
It's a needed feature IF it can be supported and implemented.
Click to expand...
Click to collapse
The custom CPU clock feature conflict the one click feature and not to mention lower clocks are not required as there is no trouble with the highest speed since the cooling is active and with sink. Just don't worry about the temps too much as everything is normal here and the purpose of console is to bear high temperatures with high load even with little heat management..

I have both the old app and the Ouya specific one and it looks to me that 2D GPU clock is set to 260MHz (1/2 of 3D clock). @Kingshoo, can you tell us what the "one click" settings are (governor, CPU clock, GPU, etc).
Much appreciate the work you've done.

Ipse_Tase said:
I have both the old app and the Ouya specific one and it looks to me that 2D GPU clock is set to 260MHz (1/2 of 3D clock). Can you tell us what the "one click" settings are (governor, CPU clock, GPU, etc).
Much appreciate the work you've done.
Click to expand...
Click to collapse
Oh really If its working on Half then I will bump that to full to in next iteration
Settings are nothing but final settings in one click. Meaning Performance governor (Because this one has no polling overhead as opposed to interactive). GPU to 520Mhz, CPU clock to 1.7Ghz (1.6 on all 4 cores as set by OUYA). Ram at 800Mhz and also no throttling on Ram and GPU so that performance is reduced only due to H/W limitation or by bad coding practices and not due to some power saving logics

Kingshoo said:
Oh really If its working on Half then I will bump that to full to in next iteration
Settings are nothing but final settings in one click. Meaning Performance governor (Because this one has no polling overhead as opposed to interactive). GPU to 520Mhz, CPU clock to 1.7Ghz (1.6 on all 4 cores as set by OUYA). Ram at 800Mhz and also no throttling on Ram and GPU so that performance is reduced only due to H/W limitation or by bad coding practices and not due to some power saving logics
Click to expand...
Click to collapse
Cool...thanks! Looking forward to v2
BTW...for reference, I had my governor set to performance for a while and it drove the fan to run almost at all times. To the point I ended up shelling 20 bux to buy the Noctua quiet fan. Maybe others have better luck with the stock fan - but if noise is a concern, I found that the "Interactive" governor scales pretty fast with no visible impact on performance vs "Performance".
My 2 cents.

After reading several reviews about Noctua 40x10mm A-Series Blades with AAO Frame, SSO2 Bearing Premium Retail Cooling Fan NF-A4x10, I decided to buy it. I replaced the noisy fan of my OUYA, and the difference in sound is amazing. I had to check if the fan was actually running because barely hear it. Also, the temperature of my equipment dropped ~ 10°C, so overheating issues could be easily fixed, if you decided to overclock. I recommend this product without a doubt. Check on eBay or Amazon.
If you want to replace the fan, here's a guide how to do it. youtube . com /watch?v=rra0FwlHvBA

Well honestly I wasn't able to play games on OUYA but since you people are playing games what the temps of CPU are anyways after say an hour? I am asking this because I don't see a need for custom coolers as 50C or 70C it really don't make any difference to your hardware. Yes the fan noise may be concerning to many but I have cotton plugs in my ears to keep it silent (these really costs cents and not $$!). OK so newer version will have interactive on one click..

My stock fan is totally silent anyway
Sent from my ADR6350 using Tapatalk

Ipse_Tase said:
Cool...thanks! Looking forward to v2
BTW...for reference, I had my governor set to performance for a while and it drove the fan to run almost at all times. To the point I ended up shelling 20 bux to buy the Noctua quiet fan. Maybe others have better luck with the stock fan - but if noise is a concern, I found that the "Interactive" governor scales pretty fast with no visible impact on performance vs "Performance".
My 2 cents.
Click to expand...
Click to collapse
i will also try this, i run my OUYA on performance all the time and it's pretty loud...

Custom roms, or stock rom modification?

Hi,
im on stock rom, with bootloader unlocked and root installed. my deivce is still very hot even after system configurations, so id like some advice on how to tweak the kernel or improve performance, make it not overheat, install custom roms or delete system apps and so on.
Ive tried uninstaller system applications or bloatware, tweaking the kernel with CPU Tuner, installing and configuring the L Speed app, who i was someone had awesome resaults with here: http://forum.xda-developers.com/xperia-z4/themes-apps/one-to-tweak-apps-l-speed-t3350288
i only get around 2 hrs of screen on time with my deice, and a lot of heat, i saw it over 80 degrees yesterday...
id like some good optimization and battery life for the device, as im not able to do so now...
thanks in advanced

xswish said:
Hi,
im on stock rom, with bootloader unlocked and root installed. my deivce is still very hot even after system configurations, so id like some advice on how to tweak the kernel or improve performance, make it not overheat, install custom roms or delete system apps and so on.
Ive tried uninstaller system applications or bloatware, tweaking the kernel with CPU Tuner, installing and configuring the L Speed app, who i was someone had awesome resaults with here: http://forum.xda-developers.com/xperia-z4/themes-apps/one-to-tweak-apps-l-speed-t3350288
i only get around 2 hrs of screen on time with my deice, and a lot of heat, i saw it over 80 degrees yesterday...
id like some good optimization and battery life for the device, as im not able to do so now...
thanks in advanced
Click to expand...
Click to collapse
Well try to install the latest firmware .244 is not that much hot. I'm using it for the past 8 hours ?

njaya95 said:
Well try to install the latest firmware .244 is not that much hot. I'm using it for the past 8 hours ��
Click to expand...
Click to collapse
Ive been using that firmware sins the day it released (a weak ago almost)? but no change there...
what i have done now is done some heavy modifications to the kernel and some CPU governors.
I flashed this Kernel: http://forum.xda-developers.com/xperia-z4/development/kernel-andropluskernel-t3392772
the kernel works like a dream after under-clocking it with this program: https://play.google.com/store/apps/details?id=com.grarak.kerneladiutor&hl=no
Used the "alucard" governor, CPU is sitting around 60 degrees when using the camera, and its a bit laggy, but much more survivable that it was before...

This Kernel is the best you can do, perhaps you can try to deactivate one or two of the big cores.

xswish said:
Ive been using that firmware sins the day it released (a weak ago almost)? but no change there...
what i have done now is done some heavy modifications to the kernel and some CPU governors.
I flashed this Kernel: http://forum.xda-developers.com/xperia-z4/development/kernel-andropluskernel-t3392772
the kernel works like a dream after under-clocking it with this program: https://play.google.com/store/apps/details?id=com.grarak.kerneladiutor&hl=no
Used the "alucard" governor, CPU is sitting around 60 degrees when using the camera, and its a bit laggy, but much more survivable that it was before...
Click to expand...
Click to collapse
I never tweaked anything but mine is only hot when I play heavy games and record video for more than 20 mins (720p)
Anyway your lag is too much or just a little bit???
And one thing I use stamina mode whenever I'm about to do something CPUy
So try it without tweaks and tell me what's the result.

Trilliard said:
This Kernel is the best you can do, perhaps you can try to deactivate one or two of the big cores.
Click to expand...
Click to collapse
thanks ill try that!!

njaya95 said:
I never tweaked anything but mine is only hot when I play heavy games and record video for more than 20 mins (720p)
Anyway your lag is too much or just a little bit???
And one thing I use stamina mode whenever I'm about to do something CPUy
So try it without tweaks and tell me what's the result.
Click to expand...
Click to collapse
I get the stamina thing, id do that too if i did not need the screen brightness
The laggs are not small, im talking CPU om 80 degrees an so hot that i can not touch top backside of the phone
and thats withou any tweaks on MM .244 with everything stock. Ive also tried it with root, but really that does not make any differense, i need to edit the kernel to be able to use the camera, or else it will shut down when recording in 720p.
Anyways, underclocking the device for me, actualle made it faster in my case, i have no idea why makes no sense, but there is no throtteling and cpu struggles when underclocking it, so now it relly smooth, a lot smoother than on stock .244 MM,
Hope it help!

xswish said:
I get the stamina thing, id do that too if i did not need the screen brightness
The laggs are not small, im talking CPU om 80 degrees an so hot that i can not touch top backside of the phone
and thats withou any tweaks on MM .244 with everything stock. Ive also tried it with root, but really that does not make any differense, i need to edit the kernel to be able to use the camera, or else it will shut down when recording in 720p.
Anyways, underclocking the device for me, actualle made it faster in my case, i have no idea why makes no sense, but there is no throtteling and cpu struggles when underclocking it, so now it relly smooth, a lot smoother than on stock .244 MM,
Hope it help!
Click to expand...
Click to collapse
Okay i'll try underclocking and let you know what happened here.

njaya95 said:
Okay i'll try underclocking and let you know what happened here.
Click to expand...
Click to collapse
thank! would like to see what others get as resaults !
have u had any heating issues as well?

xswish said:
thank! would like to see what others get as resaults !
have u had any heating issues as well?
Click to expand...
Click to collapse
Well it gets hot but I don't mind about the heat, I'll throw it in a glass of water or inside the refrigerator if it's too hot [emoji48] . And I didn't underclock it. It's still running stock governor.
Sent from my E6533 using XDA-Developers mobile app

njaya95 said:
Well it gets hot but I don't mind about the heat, I'll throw it in a glass of water or inside the refrigerator if it's too hot [emoji48] . And I didn't underclock it. It's still running stock governor.
Sent from my E6533 using XDA-Developers mobile app
Click to expand...
Click to collapse
I dont mind the heat as well, but it is throttling in my day to day use applications, that's what's bothering me?

galaxy tab s2 9.7 increase gaming performance

In some games i get lag spike like gta san anders play on medium seatings and rawensword 2 i use game tuner but not help . how to increase performance for gaming maybe custom kernel or overcloking if its possible for it or some kind programs I'm new in android staff.

If the graphics on the 815 don't work for you then surely don't replace it with an 813/819. The GPU is supposed to be better on the one you have.
I don't think these are gaming tablets really. I don't know any that are but that's not my thing. They do have more RAM and better screens than most other tablets.

any other option ?

Maybe Apple is better for gaming? I really don't know. Hopefully a clueful individual will answer you. I am too new to the whole tablet world to know much.

i find gltools maybe its improve performance i see a lot of video of it . but its need root access? who have experience from it ?

I guess you could change the thread title and perhaps get more help.

bump any suggestion? i need to improve performance for some games not to much a bit game now rawensword runs 20 fps sometime drops to 15 in fights :/ i like to boost to 30 fps any suggestion i try different programs but no luck :/

The issue is simple. The Exynos version throttles like mad with continuous high usage (games and video SW rendering). And you can do nothing about it. From what I read, the snapdragon version doesn't throttle as bad/at all. I recommend switching to android 6 if you haven't done that already, as it increases the performance by a little bit, as well as setting the resolution in those heavier game to 50% and force capping the frame rate to 30.

Dariusdd said:
The issue is simple. The Exynos version throttles like mad with continuous high usage (games and video SW rendering). And you can do nothing about it. From what I read, the snapdragon version doesn't throttle as bad/at all. I recommend switching to android 6 if you haven't done that already, as it increases the performance by a little bit, as well as setting the resolution in those heavier game to 50% and force capping the frame rate to 30.
Click to expand...
Click to collapse
I've had the exact opposite experience.
The snapdragon version lags with many games while the exynos version played all these games smoothly...
Sent from my iPad using Tapatalk

It's certainly peculiar. I couldn't play Asphalt 8 for too long without setting the resolution all the way down to 50%(1024x768). At 1080p it'd start lagging really bad on me in about 3-4 minutes at best. That doesn't mean it doesn't have an adequate overall performance, it's flying, but anything as heavy as asphalt or worse would bring it to its knees.

strange in asphalt 8 i have no lag run rely smoothly only san andres and rawensword run not what great san andres 25~28 medium graphic rawensword 22 in fight with max distance other setting cant change.

For 5.1 I was using optimal rom found in development section. He also made a kernel you could over clock with synapse support found here http://forum.xda-developers.com/tab-s2/development/nn-kernel-lp-t701-t3309570.com With synapse you can force the gpu to over clock along with cpu. Download synapse from market. In setting developer options turn off hardware overlays ticking that on will use the gpu for rendering. Off (default) cpu. At least that is my understanding. Some games work better with it on others off. Minecraft on I got 60fps at 2nd highest view distance using customers textures. Yet terraria would stutter on certain conditions but never a problem with it turned off. Warning though it will make your device hot where the cpu is. I've got no idea how well you're games will play as I have never played them. I did get a noticeable difference from stock vs the above. So maybe it's an option worth trying.

Hm thx for advise but i read all posts but i don't see anything say it's for 6.0 marshmallow and my it's sm-t815 lite version i only see 810? Maybe its work for my device ?

Might be too different. Not sure.
http://www.devicespecifications.com/en/comparison/676f391aa
You have mobile data and I just have WiFi. Everything else seemed the same.
On my xoom it was from Verizon I flashed WiFi only rom and kernels. Lost mobile data but all was fine. As long as the kernal matched the rom. Worse case recover backup or Odin MM back on it. Just use the kernel with a 5.1 810 rom plus whatever you need to root it. I used that kernel with a few different romps but never cm since that's liable to be experimental still on my death bed. So it felt compatible with any 810 rom. If I was you and didn't mind losing cellular data I would treat it as an 810. Maybe do a bit more research and make sure they really are similar.

its same i see ok but one question if i flash this kernel how much i can improve performance like gta san andres can i play max at normal frame rate become on max now i have 17~21 fps i ask it become i was thinking its wort or not don't want to lose warranty

If you don't want to lose warranty then stock it is. That's my advise. I highly doubt you would break it but still if you dropped it in get it. You want that available. I've seen root options that don't trip Knox but I didn't care to research because I didn't have a warranty. I knew using ct auto root would void warrenty (method I used) before doing it. Search for different rooting options to 810.
I get not wanting to void warranty but if you're over clocking it, rooting, accept it as a trade off. You replied before I edited my last post so maybe reread. They are slightly different.

um when how about performance in gaming ? there i mention it i read it make 2.0ghz for 4 core and for others 1.5 or 1.6 it make huge boost in game or just small i rely care about it. ?

That sounds right. And the gpu goes up to 700hz. I think stock is 600. I don't play the games you are so can't say for sure performance but it was noticeable for me. I set both cpu min 1,000 max whatever max it allowed like you mentioned. So if it needed cpu it was there. Gpu I did max because there is a noticeable difference going from 600 to 650 to 700. Put the min as the max. Then toggle on turn off hardware overlays. Other games preferred the opposite. Max cpu for both and min close to max, whatever for gpu and no toggle for turn off hardware overlays.
Don't do max cpu and max Gpu. To much heat without any improvement. Pick one or the other as max, other one able to if needed. Here is what I ended up with.
Mine craft liked the first option. Not sure what it was playing at before over clocking. Maybe 30-40 fps while flying in creative mode. Got up to 60 fps no stuttering unless I was at a huge super dense forest biome where you couldn't see the ground. Probably used 25% per hour. I know mine craft doesn't sound like much but I had fancy on (transparent leaves), 128bit textures, 2nd highest view (it was far), and flying really fast in creative. Even bought a controller because of it. Though it actualy plays and feels better without. To wierd.
Terraria preferred all cpu so second option. Again you think but it's 2d. It isn't optimized by any means. Even on pc that game uses more then one would believe. I played at 60 fps with no slowdowns on second option. Without over clock it would stutter fairly easily vs completly smooth. It felt like whoever programed the cpu made sure they never gave enough power at any given time as a cruel joke. With synapse I could set the min as max and over clock it.
All I can say in the end it is noticable. It was enough to get 60fps. For a 2d game, it wasn't worth playing unless it was so. Download terraria dig a bit underground, get some lighting going and some enemies. Notice the wonderful stutter and ask why, it's 2d. Then you can decide if that vs 60 fps is worth the void warrenty and possibly broken device achieving it.

can y try gta san andres on max with overclock your system ? i'm rely curios

No.
Sent from my SM-T810 using XDA-Developers mobile app