Hi - I apologize if this has been covered, I was unable to find an answer.
I have the Verizon HTC One - and its been great getting back to Android after being away for a few years. My question is around themes and the great stuff that comes from everyone on MyColorScreen.com...for instance I've downloaded Zooper which looks great, however if I want to use someone's .zw file I can't figure out where to drop it on the One since there's no SD card.
I have installed HTC Sync Manager - but not sure what folder to drop this file into so Zooper will recognize it. Or is there another method? And not limited to Zooper, if there are other apps or better ways to get custom themes on to the One I'm open to suggestions.
Thanks for any assistance!
you need to read a little more
There is an internal SD card, connect your phone up to a PC and have a look around
Related
I just flashed my Kaiser to Dutty and as a result it's wiped my Onenote Mobile notes (no great surprise there).
Before I flashed, I took a Sprite Backup. Does anyone know where the actual "notes" live? Is in a directory or registry entry somewhere? I'd like to restore them if possible. I have searched XDA Devs, but there's nothing I can see explaining this.
Thanks in advance...
\Application Data\Microsoft\OneNote Mobile.
I've been looking for a way to move them to another folder but I cannot find it.
Ta,
Dave
Thank You!
Thanks very much for this solution. I copied from the backup and I can see all my notes again.
You just saved me a lot of frustration
I love this forum. Every time I have some obscure question, someone has already asked it and, usually, someone else has answered it perfectly!
Thank you!
amazing
Amazing, I was asking myself this same question this afternoon on the way to school. You guys are amazing!
Thank you! Been flashing new ROMs and needed to back up my notes... this forum rocks!
one note 2010
dear all
one notes stores in local device memory instead of storage card. any solution to store the one notes 2010 files in storage cards. Please help me
just navigate to \Application Data\Microsoft\OneNote Mobile... highlight the "OneNote Mobile" folder, select menu edit, copy...then navigate to your storage card...place it anywhere you want it by hitting menu, edit, paste. Now they will be on your storage card for future retrival
Signman1123 said:
just navigate to \Application Data\Microsoft\OneNote Mobile... highlight the "OneNote Mobile" folder, select menu edit, copy...then navigate to your storage card...place it anywhere you want it by hitting menu, edit, paste. Now they will be on your storage card for future retrival
Click to expand...
Click to collapse
But how to make OneNote store to SD?
Haven't figured that out yet either...still working
I think it's Pocket Mechanic that has the option to move applications to run from storage card...I've successfully moved most everything I've tried with it. Has anyone tried 'moving' folder to storage card with this app? I'm not sure how it works...if it leaves a shortcut behind pointing to new location on card maybe? I use OneNote for work, and can't afford to screw it up and have down time trying to fix, so wondering if anyone has tried that route yet?
UPDATE: Tried above method, and it did not work. Has anyone else found a feasible way to do this yet? With it storing audio recordings in .wav format, it's basically not usable without being able to store to storage card. I run out of memory in less than one minute.
The frustration continues
Hi everybody,
I have been grappling with this damned issue with OneNote 2007 on my HD2 forever. It’d be nice if some of the top dogs here at the XDA took a minute or two out of their busy schedules to fix us up with a way to force OneNote to SD card. I mean come on people, don’t you leave us at the mercy of windows unpredictable array of hangs, crashes and total system annihilations, give us a way out.
I have personally wormed around the registry and found a way for that whole attachment thing JVolger. Go to: HKEY_LOCAL_MACHINE>Software>Microsoft>OneNote Mobile>12.0.
Once there edit the attachments String value with your favorite registry editor and change the string entry with the address of the folder where you like one note to save your attachments.
Now if someone could figure out a way to force one note to save to the SD entirely, I would be one happy man!!
I was wondering if someone could please help me as I am a complete noob at this. I recently purchased the Tilt (Kaiser) and I love it. My question is what is the best emulator for SNES to run on the tilt and can anyone give me a step by step instruction on how to put it on my phone. I was also curious as to how to put Shadow Of Legend on as well (cant seem to do it). I have plenty of space as I have a 4gb sdhc card. Any help would be greatly appreciated thank you in adavance.
Nick
There are quite a few emulators around. Some people like one and some people will hate it. It's all about personal prefs really.
Have a look around the web http://www.google.co.uk/search?hl=en&q=snes+emulator+for+pocket+pc&meta=
find a few and install them.... usually they are just a cab file that needs putting on your device and then clicking to run it exactly the same as any other PPC bit of software
Yo guy, stop making the same thread over and over again. The mods keep closing them for a reason you dope.
Sorry man im just getting overly frustrated with this i cant seem to get it on my phone i dont know exactly what to do.
Ok, I'm going to try and close this topic once and for all...
I went to http://www.spicypixel.com/web/page/morphgear/Download.aspx and downloaded MorphGear and SNES9X MorphModule by clicking on the link [CAB].
I then extracted both of the resulting ZIP files on my Vista box, and copied them to my phone using WM Device Center. After the copy was complete, I tapped on both CABs to install them (to Main Memory). I then copied one of my SNES games to my phone (I will not provide any of these because they are illegal unless you have the physical cartridge in your possession).
I then went to Start -> Programs -> Games -> MorphGear, and launched the program. THERE WAS NO MENTION OF NEEDING A SERIAL NUMBER, MorphGear is an open source application.
I then clicked on the Open file icon and browsed to where I copied Super Punch Out (my SNES game of choice) to, and tapped on it to open.
I spent 30 minutes playing it at FULL 60fps with NO slowdown due to piss poor video drivers that we have to work with.
Please do not take this next part the wrong way, but if you do not know how to install a CAB file or copy files to your device using either ActiveSync or Windows Mobile Device Center, you need to do A LOT of reading before you attempt to do anything other than make/receive phone calls on your device.
Good luck, and I hope this helps.
Hi Folks,
I'm sure the answers to my questions are somewhere on XDA, but I've not been able to find them. I've been trying to get some basic things working for a good few evenings now and I’m stuck
Using Erviuskitchen, packages creator 5.4 and EXT_PAckages_rebuilder I've been able to dump the HTC 6.5 base ROM to work from. Then put it all back together, pull some bits out, cook it and flash it to my phone....all went surprisingly well, my phone's still running and a bit more bloat-free!
What I'm stumped on though is adding things to my ROM, I'm good with packages found elsewhere, but nothing of my own.
I've got a bunch of .CABs which I'd like to 'cook in'... but when I create a package from the CAB file using packages creator 5.4 and EXT_PAckages_rebuilder and then flash it, I get no start menu icons. The app seems to be installed correctly, but without icons for it.
(my goal's to cook in a pre-configured copy of GuardMobile for if my phone's evey lost/stolen, but I'd like to be able to include other apps too).
What am I missing?
On a slightly different note: during my travels around here, I've seen various cooked ROMs which give you the option of uninstalling cooked-in apps as if they'd been installed using a .CAB file - how's this bit done?
Like I mentioned, I’m sure the these are pretty basic questions and the answers are around here somewhere, but I'm afraid my search-powers are failing me! (tbh, there's just too much info and I'm struggling to filter it down to what I need).
Any links or quick pointers would be greatly appreciated. Hey if my ROM turns out to be any good, I’ll put it up for others to use.
Thanks in anticipation!
'tunes
Most times when creating a package the shortcut created in the CAB is added to some .DAT file which you can edit using Notepad++ or any other text editor.
There should be some lines in this file like this:
Code:
Directory("\Windows"):-Directory("Start Menu\Programs")
Directory("\Windows\Start Menu\Programs"):-File("PROGRAMNAME.lnk","\Windows\SOURCESHORTCUT.lnk")
At least this is one way to do it. Con about this methode is that you need shortcuts (lnk) in your Windows folder to point to. Should be other ways. I use Mortscript in my ROM (not ready for release ) this allows me to create shortcuts without having shortcuts in my Windows folder.
EDIT:
Just did a quick search for you. THIS might help you (and us) out
Thanks mccune, I'll get reading...
Hi there. I have had my Nexus One for a week now, and so far im finding it ok - I havent really used it much though. Anyway, I have a few basic questions which are really confusing me, but I know could be simply answered by all you Pro's
Anyway, here is what I want to be able to do. What I want to do is be able to make/select my own Icons to open up applications or folders..
1: Have an Icon/picture of a game controller (or something which symbolises gaming) Then when you click on the Icon it opens a folder full of my games.
2: Have an Icon of something which symbolises Pictures. When you click on the Icon it will open up my gallery.
I Currently have Desktop Visualizer. I know with that you can select a picture and then select what you want to open with that. But I dont know how to make it so that it opens a folder when clicking not an application??
Do I need a different application? Also, Do I download the pictures/Icons on my PC then put them over to my SD Card, or just get them straight on my phone?
Last question, If I want to combine two images (Lets say for example two different types of controllers) into the one image, What software on my pc/application on my phone would I need?
Sorry if that doesnt make sense, its as english as I can make it. All help is greatly appreciated
Get Bettercut or FolderOrganizer. Look for them in the market. They will allow you to customize your app's icons and shortcuts. You should read up on how to use it, it's pretty simple so I'm not going to write it here.
The best way is to download and install "icon Packs" apk's (there are so many on here and on the markets, BIG THANKS TO THE MANY CREATIVE PEOPLE OUT THERE.). It works very well with the above apps.
to download pictures/icons on your pc to the sdcard:
1. download ASTRO file manager (free)
2. connect your phone to pc via usb, then turn on connection (make sure you have usb debugging turned on)
3. once you are connected, then your sd card becomes a "removable storage drive" and you can just copy & paste any files from your pc to the card like you would if you had an external drive.
I don't know if you want to use your phone to combine images or pictures. it will be pretty hard with the controls. i would say do it on your pc and then just transfer it over to the phone.
Thank you Thank you Thank you. Using Folder Organiser now and is exactly what I wanted. Thanks heaps for everything
Hi
Just a quick question. Running WM7 on HTC HD2 but I can't see my SD card or any settings to get to it.
Is there any obvious setting I've missed.
You won't see it as such as it's effectively incorporated into the WP7 file system. You can tweak your PC's registry to make the device appear in Windows Explorer, which gives you limited access to folders, but you really need to use Zune or email to put files onto the device - the card doesn't work quite like it used to in terms of portable storage.
I understand schapps is working on a WP7 'Device Centre' that may help with some aspects of this - should be released following the forthcoming WP7 update.
Thanks for info.
After install I only have 64MB of data storage left. Therefore I can't install aps or take pic's etc so looks like Android for me then.
Hi,
I had the same problem few days agot...
I tried two of my sd cards, and it didn't work, so I bought a new one, and re install my hd2, then it worked...
You can try to reformat the card with SDFormatter, maybe it could help!
But you have to hard reset your phone when you change your sd card.
++