Related
Hello,
I'm not gonna panic, as I think Ive not bricked my phone YET.
Here is what I have done, I have a GALAXY S I9000.
Have been using it for quite some time now. 2 years ago, I have flashed it with - hardcore's kernel with the ClockworkMod Recovery - using Odin.
Today I decided to give Cyanogenmod a go, followed the steps here. - http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S:_Full_Update_Guide
Since I have the hardoce's kernel, I skipped this Installing the ClockworkMod Recovery - and moved on to - Flashing CyanogenMod.
I will go step by step from here.
Download the latest version of CyanogenMod.
Optional: Download the Google Apps for the device.
Place the CyanogenMod update.zip file on the root of the internal memory.
Optional: Place the Google Apps .zip on the root of the internal memory also.
Boot into the ClockworkMod Recovery.
Once the device boots into the ClockworkMod Recovery, use the side volume buttons to move around, and either the power button or the trackball to select.
Select the option to Wipe data/factory reset.
Then select the option to Wipe cache partition.
Select Install zip from sdcard.
done these, no problem so far.
[*]Select Choose zip from sdcard.
when I chose this, phone rebooted, it was so fast something may have come up and I didnt see.
Now I am stuck in a boot loop:
- Galaxy S I9000 samsung screen comes up, goes away for a second, comes up again.
- A page with code appearing from the bottom comes up really fast ( logo in the middle changes quickly) then it disappears.
- whole thing starts again.
UPDATE: I got a picture of the fast screen that comes up. : http://localhostr.com/files/b5NzFRy/2012-08-27 05.07.32.jpg
Some observations.
- I can go into download mode when opening it with the key combo.
- loop only stops when I unplug the battery
I need advice on what caused this and how to fix this, please help me.
edizarca said:
I need advice on what caused this and how to fix this, please help me.
Click to expand...
Click to collapse
Just flash it again ...see quick fix and solutions link below
xsenman said:
Just flash it again ...see quick fix and solutions link below
Click to expand...
Click to collapse
I cannot see what will help me on this page, but I understand how flashing again could work.
But how with the situation I have?
edizarca said:
I cannot see what will help me on this page, but I understand how flashing again could work.
But how with the situation I have?
Click to expand...
Click to collapse
are you not able to get into recovery? If only download than you need to get back to GB and than do a progressive update from GB to ICS to JB
Flash it again. From what I've heard, it only flashes the kernel the first time.
I had the same problem today with CM7 today. Just reboot in recovery and flash again cm zip, form there on everything is gonna run smooth!
edizarca said:
Hello,
I'm not gonna panic, as I think Ive not bricked my phone YET.
Here is what I have done, I have a GALAXY S I9000.
Have been using it for quite some time now. 2 years ago, I have flashed it with - hardcore's kernel with the ClockworkMod Recovery - using Odin.
Today I decided to give Cyanogenmod a go, followed the steps here. - http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S:_Full_Update_Guide
Since I have the hardoce's kernel, I skipped this Installing the ClockworkMod Recovery - and moved on to - Flashing CyanogenMod.
I will go step by step from here.
Download the latest version of CyanogenMod.
Optional: Download the Google Apps for the device.
Place the CyanogenMod update.zip file on the root of the internal memory.
Optional: Place the Google Apps .zip on the root of the internal memory also.
Boot into the ClockworkMod Recovery.
Once the device boots into the ClockworkMod Recovery, use the side volume buttons to move around, and either the power button or the trackball to select.
Select the option to Wipe data/factory reset.
Then select the option to Wipe cache partition.
Select Install zip from sdcard.
done these, no problem so far.
[*]Select Choose zip from sdcard.
when I chose this, phone rebooted, it was so fast something may have come up and I didnt see.
Now I am stuck in a boot loop:
- Galaxy S I9000 samsung screen comes up, goes away for a second, comes up again.
- A page with code appearing from the bottom comes up really fast ( logo in the middle changes quickly) then it disappears.
- whole thing starts again.
UPDATE: I got a picture of the fast screen that comes up. : http://localhostr.com/files/b5NzFRy/2012-08-27 05.07.32.jpg
Some observations.
- I can go into download mode when opening it with the key combo.
- loop only stops when I unplug the battery
I need advice on what caused this and how to fix this, please help me.
Click to expand...
Click to collapse
Installation Procedure for CM9
If you have CWM Recovery
Copy both zip files int internal SDCARD
Boot into recovery
Do a full wipe (data/factory,cache, dalvik)
Install zip from sdcard
Choose zip from sdcard
Select the ROM
You will get boot loop
Again boot into recovery
Install the same zip file one more time
Install google app
Do a full wipe again (data/factory,cache,dalvik)
Reboot your phone
Enjoy...
Hi,
I had the same pb coming from a GB
I think this pb is very common
1) DON'T WORRY !
2) Unplug the battery when bootlooping
3) Put the SGS in Recovery Mode (the CWM's version has changed)
4) Select the CM .zip and flash it AGAIN
5) When it's done, reboot system
This time, everything shoot be OK
Just be carefull with your IMEI (always have a backup of EFS folder !)
anukilimanoor said:
Installation Procedure for CM9
If you have CWM Recovery
Copy both zip files int internal SDCARD
Boot into recovery
Do a full wipe (data/factory,cache, dalvik)
Install zip from sdcard
Choose zip from sdcard
Select the ROM
You will get boot loop
Again boot into recovery
Install the same zip file one more time
Install google app
Do a full wipe again (data/factory,cache,dalvik)
Reboot your phone
Enjoy...
Click to expand...
Click to collapse
Thanks!, this method worked a treat :highfive:
Anyone have a trick yet for CM 10.1 v.22 Nightly, I keep getting a bootloop on all their versions except the original one. This is so frustrating because I have to keep going back to stock and then update to ICS.
kvarug01 said:
Anyone have a trick yet for CM 10.1 v.22 Nightly, I keep getting a bootloop on all their versions except the original one. This is so frustrating because I have to keep going back to stock and then update to ICS.
Click to expand...
Click to collapse
Same here, after the Samsung and CM logos, and splash animation, it says :
"Encryption unsuccessful.
Encryption was interrupted and can't complete. As a result, the data on your phone is no longer accessible.
To resume using your phone, you must perform a factory reset...."
After I tap Reset phone, it goes to CWM recovery.
Do the factory reset and the same thing occured in loop.
I came from JVU and CF root.
anukilimanoor said:
Installation Procedure for CM9
If you have CWM Recovery
Copy both zip files int internal SDCARD
Boot into recovery
Do a full wipe (data/factory,cache, dalvik)
Install zip from sdcard
Choose zip from sdcard
Select the ROM
You will get boot loop
Again boot into recovery
Install the same zip file one more time
Install google app
Do a full wipe again (data/factory,cache,dalvik)
Reboot your phone
Enjoy...
Click to expand...
Click to collapse
How long should the first boot take after following these steps? And does it have to be from SDCARD, because I can't get the rom onto my sd card, I can only do it via usb otg cable
---------- Post added at 05:11 AM ---------- Previous post was at 04:34 AM ----------
anukilimanoor said:
Installation Procedure for CM9
If you have CWM Recovery
Copy both zip files int internal SDCARD
Boot into recovery
Do a full wipe (data/factory,cache, dalvik)
Install zip from sdcard
Choose zip from sdcard
Select the ROM
You will get boot loop
Again boot into recovery
Install the same zip file one more time
Install google app
Do a full wipe again (data/factory,cache,dalvik)
Reboot your phone
Enjoy...
Click to expand...
Click to collapse
Does it have to be from the sdcard or can you do it from a flash drive via usb otg. I cannot get the rom onto my sd card
paradiselost28 said:
Hi,
I had the same pb coming from a GB
I think this pb is very common
1) DON'T WORRY !
2) Unplug the battery when bootlooping
3) Put the SGS in Recovery Mode (the CWM's version has changed)
4) Select the CM .zip and flash it AGAIN
5) When it's done, reboot system
This time, everything shoot be OK
Just be carefull with your IMEI (always have a backup of EFS folder !)
Click to expand...
Click to collapse
The same thing happend to me.
Just plug out the battery and flash again on cwm recovery.
Sent from my GT-I9000 using XDA Premium 4 mobile app
By example of this thread, I thought it would be convenient to also create a separate thread for our L5. I will update this first post with relevant information and links when needed.
Info
CyanogenMod's site: http://www.cyanogenmod.org/
Announcement on Google+ by CM: link
Screenshots by luKi13223: link
Screenshots by Sirrocco with dpi lowered to 130 and theme applied: link
Requirements
Properly unlocked boot loader (here, a guide on top of first post)
Root/working CWM
Ability to read and common sense
Downloads
Nightlies started building. You can get the latest build from http://get.cm/?device=e610 OR http://10.cmxlog.com/?device=e610
CWM Recovery by Ricardo Cerqueira (CyanogenMod): Direct download. Alternatively you can download the flashable zip provided in the attachment, it's the same, but easier to install if you already had a recovery installed.
Google Apps (GAPPS) for Jelly Bean/CM10: http://goo.im/gapps/gapps-jb-20121011-signed.zip
Short Installations guide
Make sure you meet the requirements
Download needed files (see above) and place them on your internal sd card
Update your ClockWorkMod Recovery to v6.0.2.8 (you can do this by using terminal, adb (guide) or use the flashable zip I've attached
This will avoid status(7) error messages and prevent issues with ROM Manager.
Flash "cm-10-build date-NIGHTLY-e610.zip" from your internal sd card with CWM (or if you prefer with ROM Manager)
[*]Optional: Flash custom kernel by PinkFlozd: link to thread WARNING: Don't install this kernel with builds created on 21 april 2013 or later (at least not untill someone updates the kernel)
Optional: Flash "gapps-jb-20121011-signed.zip"
After first boot see if your receiving any signal (provided your normally have any signal on that spot). If not, don't worry, a simple reboot might fix it.
Enjoy
Bugs:
Considering these are the very first nightly builds of CM10 for our device, the dev did a pretty great job. Almost everything is working. Thanks to him :highfive:
Network / data is not working after 1st boot. A simple reboot after a few minutes might fix this
Multi-touch not fully working (dual touch works)?
SD card is full error, while there is still room left (up to at least 300 MB). I haven't experienced this bug in a while, it may be fixed, but I'm not sure.
Accelerometer
Small mods/Fixes
Wake with Home key
Pinkflozd's custom kernel[/COLOR]. Supports multi-touch and allows for overclocking. His kernel doesn't work with builds after April 14th
Overclocked kernel for builds made after April 14th
Workaround to make accelerometer work
:
i tried to flash this on my E612..
But i got an error.
Error in sdcard/cm blah blah.zip
(status 7)
Installation aborted.
Ianuz1320 said:
i tried to flash this on my E612..
But i got an error.
Error in sdcard/cm blah blah.zip
(status 7)
Installation aborted.
Click to expand...
Click to collapse
same here...
Will the developer look here for bugs? Or is there some other way to report CM10 bugs?
Anyway, I noticed that it drains battery much faster than the stock rom too.
Tonight it drained 20% of battery just by standby.
Ianuz1320 said:
i tried to flash this on my E612..
But i got an error.
Error in sdcard/cm blah blah.zip
(status 7)
Installation aborted.
Click to expand...
Click to collapse
First install the recovery provide by CM. This will fix this problem. You will need to copy your flashables zips and back ups to the internal SD-card, because this version only mounts internal SD (instead of only the external)
E.jr said:
Will the developer look here for bugs? Or is there some other way to report CM10 bugs?
Anyway, I noticed that it drains battery much faster than the stock rom too.
Tonight it drained 20% of battery just by standby.
Click to expand...
Click to collapse
I don't know if he will look here. We could inform him about it, when we have more clarity about the bugs.
My main purpose was to concentrate talk about CM10 in one place, because in the other thread also other subjects were discussed and it got messy. And we might help each other here with CM10 related problems.
ldeleeuw said:
First install the recovery provide by CM. This will fix this problem. You will need to copy your flashables zips and back ups to the internal SD-card, because this version only mounts internal SD (instead of only the external)
Click to expand...
Click to collapse
thank you buddy..but where can we get recovery provide by CM?
For Instalation aborted :
Open downloaded zip by winrar or 7zip.
Open Meta-inf>google>android>updater-script
Open updater-script by notepad++
Delete first lane in updater-script
Save and rebuild archive (automaticly)
Copy your package to sd card and instal via cwm
Kisloo said:
For Instalation aborted :
Open downloaded zip by winrar or 7zip.
Open Meta-inf>google>android>updater-script
Open updater-script by notepad++
Delete first lane in updater-script
Save and rebuild archive (automaticly)
Copy your package to sd card and instal via cwm
Click to expand...
Click to collapse
it's not working buddy.
delete this lane :
assert(getprop("ro.product.device") == "e610" || getprop("ro.build.product") == "e610");
Click to expand...
Click to collapse
and it will work
Thanks buddy.. it worked on my phone!! but first boot took so long..i was stuck on CyanogenMod boot logo!! untill now!
Ianuz1320 said:
thank you buddy..but where can we get recovery provide by CM?
Click to expand...
Click to collapse
check first post
The new nightly does seem to lag a little as opposed to the original one.
The first one was smoother I've noticed.
E617
Has anyone tried CM10 for the E617 version of the L5? I'm to much of a newb to try it myself, I wouldn't be able to find my way back if I screwed-up my phone.
Bootlop
Im on cm bootloop about 20 minutes WHEN THIS WILL BOOT UP
I noticed that this cm10 for e610 has a kind of problem with multitouch,I have played shadow gun,modern combat 3 and modern combat 4 and six guns and in all these 4 games, I noticed that I can't move at the same time that I shoot,I wait that they solve this problem in next updates ;p
Sent from my LG-E610 using xda premium
Kisloo said:
delete this lane :
and it will work
Click to expand...
Click to collapse
thanks a lot mate!
---------- Post added at 08:57 PM ---------- Previous post was at 08:53 PM ----------
DodoKoce said:
Im on cm bootloop about 20 minutes WHEN THIS WILL BOOT UP
Click to expand...
Click to collapse
E: I found out why there is a bootloop, we didn't took the right bootloader, see here my tutorial: http://forum.xda-developers.com/showthread.php?t=2186161 - if you do everything like i did, everything will work properly
Use older build, idk - new is more bugged :/ Old working smarter than new.
OK, I've got it installed (nightly 20130310), first I installed the provided CWM (6.0.2.8), had to do that manually though, because for some reason Rom Manager destroyed the 6.0.2.5 version I had when I tried to install CWM through Rom Manager.
It's running smoothly, although I also see a little graining in the screen. I had no data issues.
Also, booting didn't take that long.
One strange phenomenon:
I had FreeL5 running before CM10. Before flashing CM10 I did a factory reset from CWM, cleaned cache and Dalvik cache. After booting CM10 for the first time, my WiFi settings were still there... hadn't expected that, but since I'm on a corporate WiFi connection which needs a username and password to connect, it was nice not to have to retype it :victory:
---
Previous devices:
HTC Desire - MIUI
HTC Desire HD - MIUI
Sony XPeria S - FreeXPeria JB
Current devices:
Samsung Galaxy Tab 2 7.0 - Stock JB (because my girlfriend doesn't want me 'messing' with it)
LG Optimus L5 (E610) - CM10 nightly
Bootloop too, any way to solve?
[STOCK][C6602&C6603][4.2.2] Update to 10.3.A.0.423 [Rooted & XZDualRecovery][LB/UB]
Requirements:
Flashtool by @Androxyde
XZDualRecovery 2.5 BETA
Current FW version: 10.1.A.1.350, 10.1.A.1.434, 10.1.1.A.1.253 or 10.1.1.A.1.307 all can be updated!
Special features:
Superuser integrated in system, FULL root, no reboots when remounting /system RW!
XZDualRecovery 2.5 BETA (CWM 6.0.3.2 & TWRP 2.5.0.0) pre-installed;
Tailored FTF to minimize the chance of accidental system wiping!
No need to clear caches!
@shem2409 created a nice youtube video guide to assist you in your work, be sure to check this post for it! Thanks m8!
In the following guide I suggest you use an external SDCard but that's just good practice, you can use your internal storage or even an USB OTG storage device in TWRP if you like to install, that's no problem!... If you are modding and the likes, best is to have an external sdcard, just for safeties sake.
C6602: How to update to 10.3.A.0.423:
NOTE: STICK TO THIS ORDER AND STEPS!!
For C6602: Download C6602.flashable.423.zip (Bittorrent: 686MB) and C6602_10.3.A.0.423-stripped.ftf (15MB), save it somewhere you remember;
Put 'C6602.flashable.423.zip' on (the external) SDcard1;
Put 'C6602_10.3.A.0.423-stripped.ftf' inside the Flashtool/firmwares folder;
Create a backup of your phone in CWM or TWRP and don't forget to backup the contents of 'SDCard0';
Flash 'C6602.flashable.423.zip' in TWRP, do not reboot but go back to the main menu, then go to reboot->power off;
Flash everything in 'C6602_10.3.A.0.423-stripped.ftf';
Reboot to system without clearing (dalvik-/)cache.
C6603: How to update to 10.3.A.0.423:
NOTE: STICK TO THIS ORDER AND STEPS!!
For C6603: Download C6603.flashable.423.zip (Bittorrent: 719MB) and C6603_10.3.A.0.423-stripped.ftf (15MB), save it somewhere you remember;
Put 'C6603.flashable.423.zip' on (the external) SDcard1;
Put 'C6603_10.3.A.0.423-stripped.ftf' inside the Flashtool/firmwares folder;
Create a backup of your phone in CWM or TWRP and don't forget to backup the contents of 'SDCard0';
Flash 'C6603.flashable.423.zip' in TWRP, do not reboot but go back to the main menu, then go to reboot->power off;
Flash everything in 'C6603_10.3.A.0.423-stripped.ftf';
Reboot to system without clearing (dalvik-/)cache.
The first boot will be considerably slower and after a long wait at the boot animation you will see Android optimizing the apps on your phone.
After updating your NFC firmware and some update information has been displayed, all is done!
I have done this myself, using my own method and I have not found any problem yet, again! :fingers-crossed:
Enjoy! :victory:
Known XZDualRecovery Issues:
TWRP Usage warning: It seems TWRP 2.5.0.0 has issues with the internal storage, which seem related to the changes made to support encrypted storage volumes... This means the internal storage sometimes shows up almost empty (just folders) and no files. Try to use CWM when that happens.
Busybox Updater/Installer: If you have XZDualRecovery installed, un-install any Busybox updating app/tool as most if not all of them will install a version of busybox which does not support the lzma compression applets XZDualRecovery depends on. The version installed together with XZDualRecovery is very stable and I have yet to hear anyone complain about it's stability.
How to report errors:
Please, before shouting out "It doesn't work!!1!" or "I lost root!" or even "My phone reboots when remounting /system RW!!" try the following:
Restore a /system ONLY using any means you are familiar with so you can try again.
Root it using [Z][ROOT] DooMLoRD Easy Rooting Toolkit.
Install XZDualRecovery and then try to update again using TWRP. This time you can skip the FTF as it has already done it's job.
If it still fails something from there on: LOGS!!.
NOTE: The important ones can be found in /cache/recovery and in /tmp/XZDualRecovery, pack them up and send them to me.
Thank you
Flashable ROM Mutator:
Download AROMA ROM Mutator 0.14
This (former patch package) uses AROMA to create a user friendly menu to choose between updates to be installed.
If you want to switch from SuperSU (default in this ROM) to SuperUser (Be careful, SuperUser is incompatible with 4.2.2!) you can use this to make the change.
If you have the reboot problem when trying to remount /system writable, you can reinstall the superuser app of your preference, it's installation includes the latest patch.
If you are missing /system/bin/chargemon.stock and you want to be able to charge your phone while it's turned off.
Flash using one of the recoveries!
Version 0.13 and upwards is using AROMA 2.70B1 or better, the below warning can be ignored for now. Let me know how it performs!
AROMA Warning: AROMA currently works best in TWRP but even there it has some issues on the Z/ZL. It sometimes does not start up correctly or it has a 'sticky button' issue. It makes it a little less easy to use but this will be fixed in time. It is a combination problem caused by the new hardware and incompatibility with it and the fact the recoveries both have been updated considerably to work on the latest phones, causing issues with some functionality of AROMA.
If it hangs when trying to start, reboot your phone and try again.
If it has the sticky buttons, press the button again to activate.
You can avoid the sticky buttons by pressing them for about half a second (that means not too short and not too long). It will work, it's just showing a bug associated with the latest recoveries.
The Samsung S4, HTC One and One X and the Nexus 4 & 7 show the same issues. For them AROMA sometimes crashes, this is an issue i have not yet observed on the Z/ZL.
Thanks go to @Androxyde for the FTF creation, cheers m8!
nice! so does that mean we dont need to factory wipe before upgrading? I thought if we go across versions (4.1.2 > 4.2.2) you gotta wipe all your stuff first.
After flashing the stripped ftf, the phone doesn't go into recovery. It shows green light, Sony logo and nothing else. Then it just reboot again. Already tried downloaing the file and flashing again. still the same problem.
Ya, I need manual install dual boot to access back to CWM/TWRP then just can install but the preinstall superuser root is not working at all.
Root working back by installing DooMLoRD Easy Rooting Toolkit (v15) - http://forum.xda-developers.com/showthread.php?t=2327472
Is there any reason why the dalvik cache are not wiped in this release process?
Is it simply a speed/optimisation thing, or will it cause issues if it happens?
Comming from PAC... Do i need to install other Stock rom before update or just use the instructions above? thanks.
Ok, so this is what ive done to get this to boot, on existing rom with recovery installed I flashed the .432.zip, obviously it bootlooped, but then flashed the ftf file which got the rom to boot. Then rooted and installed recovery as Andrewtst has linked to above.
Cheers.
Can't download the zip and ftf file, doesnt work, anyone can confirm that? can you reuploading or verify if is everything ok, thx for the work you done.
zanndoth said:
After flashing the stripped ftf, the phone doesn't go into recovery. It shows green light, Sony logo and nothing else. Then it just reboot again. Already tried downloaing the file and flashing again. still the same problem.
Click to expand...
Click to collapse
I got into the same problem, and cannot get out. Anyone has any advice?
please fix dead links
dopeee said:
nice! so does that mean we dont need to factory wipe before upgrading? I thought if we go across versions (4.1.2 > 4.2.2) you gotta wipe all your stuff first.
Click to expand...
Click to collapse
I found out with the leak by doomlord that it would be possible to update, no need to wipe, the official update works even better
lysp said:
Is there any reason why the dalvik cache are not wiped in this release process?
Is it simply a speed/optimisation thing, or will it cause issues if it happens?
Click to expand...
Click to collapse
It's meant as an update process and not wiping anything will make the ROM treat your phone as one that just got updated
Faelz said:
Comming from PAC... Do i need to install other Stock rom before update or just use the instructions above? thanks.
Click to expand...
Click to collapse
Yes, you need a stock ROM before you can flash this, I would not recommend updating your phone from PAC...
bungknees said:
Ok, so this is what ive done to get this to boot, on existing rom with recovery installed I flashed the .432.zip, obviously it bootlooped, but then flashed the ftf file which got the rom to boot. Then rooted and installed recovery as Andrewtst has linked to above.
Cheers.
Click to expand...
Click to collapse
&
zanndoth said:
After flashing the stripped ftf, the phone doesn't go into recovery. It shows green light, Sony logo and nothing else. Then it just reboot again. Already tried downloaing the file and flashing again. still the same problem.
Click to expand...
Click to collapse
&
chuazy said:
I got into the same problem, and cannot get out. Anyone has any advice?
Click to expand...
Click to collapse
I have modified the guide a bit as i should have done before i posted it...
Restore the kernel to anything other then the 4.2.2 one and then try to flash the update package, after flashing the update, re-flash the kernel.
I made one error in my guide: If someone is not using the correct version of XZDualRecovery (2.5 BETA) then you lose recovery when on the 4.2.2 kernel. The correct steps order to prevent this from happening are now in the OP.
please fix dead links
calvinleeabc said:
please fix dead links
Click to expand...
Click to collapse
+1
After flashing this Rom, my data is still at Data/media but not on the default path, what should i do in this case? should i move the data from data/media to new location manually?
calvinleeabc said:
please fix dead links
Click to expand...
Click to collapse
buciupetru said:
Can't download the zip and ftf file, doesnt work, anyone can confirm that? can you reuploading or verify if is everything ok, thx for the work you done.
Click to expand...
Click to collapse
Sorry guys, the server is under a heavy load at the moment... the webserver lost a few workers that ate up much of the cpu time. I've killed them all and restarted the webserver.
IF the problem was caused by that, it's solved now
lethalfriend said:
After flashing this Rom, my data is still at Data/media but not on the default path, what should i do in this case? should i move the data from data/media to new location manually?
Click to expand...
Click to collapse
No need: /data/media IS the 'new' location.
[NUT] said:
Sorry guys, the server is under a heavy load at the moment... the webserver lost a few workers that ate up much of the cpu time. I've killed them all and restarted the webserver.
IF the problem was caused by that, it's solved now
Click to expand...
Click to collapse
thanks:good:efficient
[NUT] said:
No need: /data/media IS the 'new' location.
Click to expand...
Click to collapse
But strangely, my phone isn't detecting the media from the above path, its just showing the pictures form newly created DCIM folder which is on a different location
lethalfriend said:
But strangely, my phone isn't detecting the media from the above path, its just showing the pictures form newly created DCIM folder which is on a different location
Click to expand...
Click to collapse
Ooh... i now see what you mean... you are correct. I'll patch up the flashable package to do it automatically.
For you, use a file explorer to move the contents (skipping the 0 folder) of /data/media to /data/media/0/. Sorry man, i missed that completely on my phone
server stilll unreachable.
Ok, I see many of you have tried installing CM11 but with "Status 7" on the installing process
See this thread how to install CM11 http://forum.xda-developers.com/galaxy-ace/s5830i-develop/rom-cyanogenmod-11-0-androidarmv6-t2805309
But I've figured out that many of you have not completely understand this process..
First let's install the Clockwork mod Recovery onto our phones:
1.Download this zip onto your SD card Click!
2.Boot into recovery (hold vol + vol- and power until the screen goes on)
3.In recovery select Apply update from SD card and select the Clowermod_Recovery_MTD.zip file and it will install it
4.Select Reboot system now in your stock recovery, or if you have temporary CWM recovery select advanced and Reboot Recovery...
5.Install the CM11 zip from your SD card through the CWM recovery
Second way for installing the CM11 without the bugs and that you can run your phone with SIM card and some bugs fixed also:
1.Follow this thread Click!
2.Go into Odin and put this file in your phone place without PDA and CSC Click!
3.Hit start and boot into stock ROM with that modem
4.Follow the above instructions
And that it is you phone is now running 4.4.4 Kit Kat
Addon:
If you have any trouble during the process (if you didn't go through the explanation very well, if you did there wont be any problems) do this process from this thread
Click!
I am not responsible for any damage done to your mobile phone!!
If you want you can donate to me for this only by clicking nothing else:
If you want click on this link to donate me 20 points haha wo hoo
http://www.allkeyshop.com/?mref=dobermanGT
Status 7-Error by installing ClockworkMod-Recovery 6.0.8.2 on Samsung Cooperve
Hello,
I want to install CyanogenMod 11 on my Samsung Cooperve.
when I go into Recovery Mode and try to install ClockworkMod-Recovery 6.0.8.2 - as mentioned in flexton´s howto - I get the Error Messages:
Code:
This package is for „cooperve,GT-S5830i,gt-s5830i“ devices; this is a „“.
E:Error in /tmp/sideload/package.zip
(Status 7)
Installation aborted.
Thats weird because my device IS a cooperve,GT-S5830i. What went wrong here and how can I solve this problem?
I don´t know, If this is important, but my Andorid System does not boot anymore.
foto2000 said:
What went wrong here and how can I solve this problem?
I don´t know, If this is important, but my Andorid System does not boot anymore.
Click to expand...
Click to collapse
I think for the moment you have to restore your system.
Edit
I find it this link for S5830i:
http://forum.xda-developers.com/showthread.php?t=1840645
I wish you success !
rom link dead
the link to the cm11 rom doesnt work. I cannot find the cm11 rom for s5830i anywhere. Please help
Best Tutorial I've found! Works perfect. Thanks.
Windows 7 is the most recommended OS to do almost all work without any problem, So I recommend you to activate your existing OS being purchased its license code from ODosta Store
Which is distributing license for almost all types of Microsoft Products with good customer support. I personally use it and have a good experience.
You can upgrade your windows 7 or windows 8.1 pro to windows 10, But you can face some technical issues, So I recommend you to have clean installation of Windows 7, windows 8 or Windows 10 and activate it using legal license.
Latest Ufirm QE2 Nougat Firmware For The S7 Flat Only
This well give you a Customizable NonRooted Rom that uses stock boot.img not the eng boot image so there is no lag and it will pass safetynet checks and samsung pay will work
Give this guy @umaro some thanks he worked on this until it became reality even when I gave up
Files To Download
Odin.zip
ADB_Root_G930U_QE2Files.zip
UFIRM_G930_Odin_Firmware.zip
FlashFire_Flashable_G930UFirmware.zip
UFirm_Multi_Carrier_Hybrid_NoNaMe_PS_BS_Free_G930U_QE2_V2.zip
These first 2 step must be done first unless you are on my previous version of this rom or my carrier specific rom that do not have root or if your unsure just do this first
This Will Wipe Your Phone
1. Unzip UFIRM_G930_Odin_Firmware.zip and flash all files in odin
2. Go through setup ignore invalid sim message and skip adding accounts
3. Goto Step 3 Below
If you are on one of my previous version of this rom or my carrier specific rom
1. Unzip UFIRM_G930_Odin_Firmware.zip
2. Use odin to flash BL and CP
3. Unzip ADB_Root_G930U_QE2Files.zip
4. Flash EngBoot image with odin
5. Root Phone. Im not going to have half a page about rooting there is an entire rooting thread here. The Eng Boot.img can be found in the UFIRM_QD2_Modified_Nougat_Firmware Folder
6. Unzip FlashFire_Flashable_G930UFirmware.zip
7. Copy AP_FlashFire_Only_G930U_QE2_Firmware.tar.md5 to your phone
8. Copy UFirm_Multi_Carrier_Hybrid_NoNaMe_PS_BS_Free_G930U_QE2_V2.zip to your phone
9. Open FlashFire and click Add Zip and choose UFirm_Multi_Carrier_Hybrid_NoNaMe_PS_BS_Free_G930U_QE2_V2.zip make sure to check mount system
10. Now in FlashFire click Add Firmware and choose AP_FlashFire_Only_G930U_QE2_Firmware.tar.md5 select all the partitions
11. Make sure Inject SuperSu is not selected
12. Click Add Wipe and choose Wipe Dalvik Cache and Cache and choose Format Cache Also select wipe SuperSU image. Make sure wipe is at end of flash sequence. The sequence should be AP file first then Zip second and Wipe cache last
13. Now Choose Flash
14. Phone will take Up to 20 minutes to boot
15. Reflashing Zip Will Require Flashing The AP File In FlashFire At The Same Time
16. Do not use Package Disabler Pro if you Choose NoNaMe mods in Aroma
MODS- (NoNaMeRomControl)
3minitbattery
Speed meter
Status bar mods
Center clock
Wifi/signal bar mods
Color change icon mod
Custom backgrounds
Notification drop-down
Incallui background
Gif in notification drop-down
Change/remove carrier names
And much more...
THANKS AND CREDITS
@jds3118 for testing and providing files and bootlooping his phone countless times for me
Gharrington for his awesome 3minitbattery mod...
NoNaMe rom development team for their incredible mods and rom control app...
@malbert16442 for his black themes
Xda for all the great guides to accomplish this...
Kernel source
RomControl Source
In the OP I had the ADB_Root_G930U_QE2Files.zip linked to the ADB_Root_G935U_QE2Files.zip zip so please make sure you have the ADB_Root_G930U_QE2Files.zip when downloading. Its fixed in the OP now so just double check
I recommend everyone put the Flashfire AP zip and Rom Zip on your internal storage as the AP file is so large that it may not be read properly do too limitations of some SD Cards. When you select AP file in Firmware there should be 4 partitions that are selected. If not then you have a bad download or need to have AP file on internal storage
Thanks for all your hard work . I just installed this so far so good but I am missing Wi-Fi calling. Is that normal or am I just not looking in the correct place? Thanks
ledezma2003 said:
Thanks for all your hard work . I just installed this so far so good but I am missing Wi-Fi calling. Is that normal or am I just not looking in the correct place? Thanks
Click to expand...
Click to collapse
You may have to flash the TMO version of this rom
jrkruse said:
You may have to flash the TMO version of this rom
Click to expand...
Click to collapse
Ok will try that when I get a chance. Thanks again.
Thx for an awesome rom.
Sorry if this question is asked before but couldn't find a solution (checked Verizon thread as well).
I am running Playstore version ROM and everything is working fine except Video Recording.
Photo is fine but when I record a video with included Camera NX, it only plays sound and the screen is either still or black.
I have been taking a needed break. I will update all my s7 roms including this one in the next few days
Nice
That rom can flash for g930p? tks your work!!
@jrkruse
Thanks for all your contributions to this device. I just bought this device and I've been diving through the forums trying to gather as much info on this locked down device.
Could you provide me with just the boot images that don't check the system image and from what model/rom are they from?
Oh and could you provide the partitions locations? The latest roms have an updated Knox that blocks SU from doing it's thing and I have to perform everything via adb (eng boot).
Blank screen
Hello,
I am on your custom rom and the phone was working fine for a day. After I restarted the phone I am not able to see the lockscreen. Its just blank. I do hear the sound of taking a screenshot when I press the buttons and I also can see the " shut down, restart, emg mode" buttons when I hold the power button but no lockscreen. I tried running the recovery boot img but nothing changed.
There is some kind of issue at the locksceen after a restart.
I'm Stuck
jrkruse said:
Latest Ufirm QE2 Nougat Firmware For The S7 Flat Only
This well give you a Customizable NonRooted Rom that uses stock boot.img not the eng boot image so there is no lag and it will pass safetynet checks and samsung pay will work
Give this guy @umaro some thanks he worked on this until it became reality even when I gave up
Files To Download
Odin.zip
ADB_Root_G930U_QE2Files.zip
UFIRM_G930_Odin_Firmware.zip
FlashFire_Flashable_G930UFirmware.zip
UFirm_Multi_Carrier_Hybrid_NoNaMe_PS_BS_Free_G930U_QE2_V2.zip
These first 2 step must be done first unless you are on my previous version of this rom or my carrier specific rom that do not have root or if your unsure just do this first
This Will Wipe Your Phone
1. Unzip UFIRM_G930_Odin_Firmware.zip and flash all files in odin
2. Go through setup ignore invalid sim message and skip adding accounts
3. Goto Step 3 Below
If you are on one of my previous version of this rom or my carrier specific rom
1. Unzip UFIRM_G930_Odin_Firmware.zip
2. Use odin to flash BL and CP
3. Unzip ADB_Root_G930U_QE2Files.zip
4. Flash EngBoot image with odin
5. Root Phone. Im not going to have half a page about rooting there is an entire rooting thread here. The Eng Boot.img can be found in the UFIRM_QD2_Modified_Nougat_Firmware Folder
6. Unzip FlashFire_Flashable_G930UFirmware.zip
7. Copy AP_FlashFire_Only_G930U_QE2_Firmware.tar.md5 to your phone
8. Copy UFirm_Multi_Carrier_Hybrid_NoNaMe_PS_BS_Free_G930U_QE2_V2.zip to your phone
9. Open FlashFire and click Add Zip and choose UFirm_Multi_Carrier_Hybrid_NoNaMe_PS_BS_Free_G930U_QE2_V2.zip make sure to check mount system
10. Now in FlashFire click Add Firmware and choose AP_FlashFire_Only_G930U_QE2_Firmware.tar.md5 select all the partitions
11. Make sure Inject SuperSu is not selected
12. Click Add Wipe and choose Wipe Dalvik Cache and Cache and choose Format Cache Also select wipe SuperSU image. Make sure wipe is at end of flash sequence. The sequence should be AP file first then Zip second and Wipe cache last
13. Now Choose Flash
14. Phone will take Up to 20 minutes to boot
15. Reflashing Zip Will Require Flashing The AP File In FlashFire At The Same Time
16. Do not use Package Disabler Pro if you Choose NoNaMe mods in Aroma
MODS- (NoNaMeRomControl)
3minitbattery
Speed meter
Status bar mods
Center clock
Wifi/signal bar mods
Color change icon mod
Custom backgrounds
Notification drop-down
Incallui background
Gif in notification drop-down
Change/remove carrier names
And much more...
THANKS AND CREDITS
@jds3118 for testing and providing files and bootlooping his phone countless times for me
Gharrington for his awesome 3minitbattery mod...
NoNaMe rom development team for their incredible mods and rom control app...
@malbert16442 for his black themes
Xda for all the great guides to accomplish this...
Kernel source
RomControl Source
Click to expand...
Click to collapse
I followed the directions up to Step 7.
For the life of me I can not get the AP file to copy to my SD card. Yes I have enough space on it and I can get the ROM copied.
I tried copying the AP file with a file explorer, on my PC, external card reader. Every time I try, it gets to about 95-99% and says "copy failed".
I know it says flashfire only, but is that my only option?
Reegs said:
I followed the directions up to Step 7.
For the life of me I can not get the AP file to copy to my SD card. Yes I have enough space on it and I can get the ROM copied.
I tried copying the AP file with a file explorer, on my PC, external card reader. Every time I try, it gets to about 95-99% and says "copy failed".
I know it says flashfire only, but is that my only option?
Click to expand...
Click to collapse
In my case I created a folder named Download in Internal Storage and copied Zip and AP files there. I didn't have trouble coping files there.
From my experience & guess, you may still have old files & settings even though you flashed U-firm files Step 1-2.
Try to access recovery mode and do factory reset and see if this helps. Make sure you backup all important files to External SD because it will factory reset.
So I rooted my phone using Araltd's guide in this forum. I've got a couple of questions about this rom...
1. If I were to flash this rom to my device, would it remove my root access?
2. What's device performance like? After rooting, my device is very slow and buggy. Will this fix that?
3. Will my device still be full of T-Mobile's bloatware?
Thanks!
wolfpls254 said:
So I rooted my phone using Araltd's guide in this forum. I've got a couple of questions about this rom...
1. If I were to flash this rom to my device, would it remove my root access?
2. What's device performance like? After rooting, my device is very slow and buggy. Will this fix that?
3. Will my device still be full of T-Mobile's bloatware?
Thanks!
Click to expand...
Click to collapse
1. Yes, it will remove Root Access but you can still use ADB to do root stuff like push / pull files.
2. Since it will use stock boot instead of ENG boot, it will fix the lag issue.
3. This is U (universal) firmware so it won't have Tmobile bloat but it will have Samsung bloat/apps. During the install you can also choose de-bloat level too. From my experience BS-Free (2nd one), is both lightweight and stable. If you go with Playstore level (most lightweight, replace Samsung Apps with Google ones), you will have trouble with camera.
kyungone said:
1. Yes, it will remove Root Access but you can still use ADB to do root stuff like push / pull files.
2. Since it will use stock boot instead of ENG boot, it will fix the lag issue.
3. This is U (universal) firmware so it won't have Tmobile bloat but it will have Samsung bloat/apps. During the install you can also choose de-bloat level too. From my experience BS-Free (2nd one), is both lightweight and stable. If you go with Playstore level (most lightweight, replace Samsung Apps with Google ones), you will have trouble with camera.
Click to expand...
Click to collapse
Do you know how this rom compares to the QF6 one which seems to be a bit more popular?
wolfpls254 said:
Do you know how this rom compares to the QF6 one which seems to be a bit more popular?
Click to expand...
Click to collapse
The QF6 ROM you mentioned is T-mobile firmware so it will have Tmobile apps. Most of them can be removed from ROM install or disabled after.
Other than that there's no performance difference.
If you want Tmobile like environment with Tmobile update schedule, go with T-mobile one. If you want less carrier apps, go with U-Firmware one.
I will no longer be updating my s7 threads until the time Oreo is released with root method. For now I have worked with @stang5litre to bring my non-root method to his amazing rom. He currently has a nougat release found here http://stang5litre-roms.proboards.com/
I keep getting samsung pay connection error. any fixes? i tried factory reset and reset settings, but the app still doesnt work. do i have to reflash the rom?
amdeng said:
I keep getting samsung pay connection error. any fixes? i tried factory reset and reset settings, but the app still doesnt work. do i have to reflash the rom?
Click to expand...
Click to collapse
If you at any point tried to root it or flashed the modified boot image then you are no longer passing the safteynet checks, my suggestion is to do a clean install and see if it works then try it again making sure you don't root after you are done installing this rom.