with no external SD Card, the NOOK HD+ only Boots To Recovery. It will not Boot from external SD image.
RLeeA said:
with no external SD Card, the NOOK HD+ only Boots To Recovery. It will not Boot from external SD image.
Click to expand...
Click to collapse
Ok, NOOK HD+ finally booted with a External SD image CWM 6032 , but at bottom of CWM page it says
E: Can't mount/cache/recovery/command
E: Can't mount/cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount/cache/recovery/last_log
E: Can't open/cache/recovery/last_log
RLeeA said:
Ok, NOOK HD+ finally booted with a External SD image CWM 6028 , but at bottom of CWM page it says
E: Can't mount/cache/recovery/command
E: Can't mount/cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount/cache/recovery/last_log
E: Can't open/cache/recovery/last_log
Click to expand...
Click to collapse
You could have a few things wrong. If you formatted /bootdata then it will only boot to recovery. Or you might be a victim of the emmc bug.
You need to tell us more how you got to this state.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
You could have a few things wrong. If you formatted /bootdata then it will only boot to recovery. Or you might be a victim of the emmc bug.
You need to tell us more how you got to this state.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
was working fine Installed CM10.1 and tried going to 10.2 but something happened and all I could get was Nook HD+ booting to Recovery without external SD installed.
I tried several images , but the only one that would Boot is the Stock CM 6028 . and that is were it is at. the Screen reads what I posted first, except on Top it reads " SDCARD-based recovery v6.0.3.2 "
can this be done from were I'm at ?
6. Full HD/HDplus 2.1.1 Stock with Root
I now have full stock 2.1.1 rooted ROM zips. They can be flashed with the CWM above and have the verygreen boot.img that removes the /system file protection. They also are rooted and have superuser and busybox. Get the HD version of the rooted stock here or here and the HD+ version here or here. They can be flashed over whatever version you have. You can do it without any wiping so your installed apps and settings will remain intact. If you had previously flashed the new Enable Unknown Sources zip, that is a setting and should stick. But the ROM zips will replace your entire /system so any other zips you flashed here like Extras or swaps will be gone. After flashing this ROM, you will need to reflash any mods you want from this thread (except the new Enable Unknown Sources). ??
RLeeA said:
was working fine Installed CM10.1 and tried going to 10.2 but something happened and all I could get was Nook HD+ booting to Recovery without external SD installed.
I tried several images , but the only one that would Boot is the Stock CM 6028 . and that is were it is at. the Screen reads what I posted first, except on Top it reads " SDCARD-based recovery v6.0.3.2 "
Click to expand...
Click to collapse
That is not my 6028 version for stock. That is verygreen's SD install version 6032. You had to have gotten that from his early7.1 zip.
When you tried to go to CM10.2, did you do any wiping? If so, what did you wipe?
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
That is not my 6028 version for stock. That is verygreen's SD install version 6032. You had to have gotten that from his early7.1 zip.
When you tried to go to CM10.2, did you do any wiping? If so, what did you wipe?
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Ok, I have used " NookHDplus-bootable-CWM-6028-for-stock-4GB-rev4-(05.15.13) " Boots to Recovery
" CWM-based Recovery v6.0.2.8 for HD+ (stock)"
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
E: Can't mount /sdcard/
E: Can't mount /emmc/
and yes I did Wipe all that I usually do Factory, cache, delv cache ... then install
RLeeA said:
Ok, I have used " NookHDplus-bootable-CWM-6028-for-stock-4GB-rev4-(05.15.13) " Boots to Recovery
" CWM-based Recovery v6.0.2.8 for HD+ (stock)"
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
E: Can't mount /sdcard/
E: Can't mount /emmc/
and yes I did Wipe all that I usually do Factory, cache, delv cache ... then install
Click to expand...
Click to collapse
But you did not wipe/format /bootdata?
You should be able to flash a plain stock zip. I recommend trying the 2.1.0 version.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
But you did not wipe/format /bootdata?
You should be able to flash a plain stock zip. I recommend trying the 2.1.0 version.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
OK , I put the " stock-ovation-2.1.0.zip " on the bootable SD
when i " choose Zip from SD Card"
it says a bottom
E: Can't mount /sdcard/
RLeeA said:
OK , I put the " stock-ovation-2.1.0.zip " on the bootable SD
when i " choose Zip from SD Card"
it says a bottom
E: Can't mount /sdcard/
Click to expand...
Click to collapse
You have really got your files mixed up. If you are using the sdcard 6032 CWM, that is why you got that error message. You are getting your files from the verygreen thread and that version expects sdcard to be somewhere else. Use my thread and use my 6028 CWM bootable SD.
You quoted my section 6 about the rooted 2.1.1. There is where you get the plain stock 2.1.0 I was suggesting. But verygreen's should work.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
You have really got your files mixed up. If you are using the sdcard 6032 CWM, that is why you got that error message. You are getting your files from the verygreen thread and that version expects sdcard to be somewhere else. Use my thread and use my 6028 CWM bootable SD.
You quoted my section 6 about the rooted 2.1.1. There is where you get the plain stock 2.1.0 I was suggesting. But verygreen's should work.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
OK , I put the "NookHDplus-factory-2.1.0-plain-stock" on the bootable SD
when i " choose Zip from SD Card"
it says a bottom
E: Can't mount /sdcard/
could the internal ram be messed up ?
RLeeA said:
OK , I put the "NookHDplus-factory-2.1.0-plain-stock" on the bootable SD
when i " choose Zip from SD Card"
it says a bottom
E: Can't mount /sdcard/
could the internal ram be messed up ?
Click to expand...
Click to collapse
Which CWM are you using?
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
Which CWM are you using?
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
NookHDplus-bootable-CWM-6028-for-stock-4GB-rev4-(05.15.13).img
2: I can only Boot with this image , It will not install anything from this external (4gb sandisk SD card)
1: I did have this Booting from Internal 32gb SD , and same thing ,, could not install anything from there.
I think the internal Ram is messed up, but I do not know how to check it ?
RLeeA said:
NookHDplus-bootable-CWM-6028-for-stock-4GB-rev4-(05.15.13).img
2: I can only Boot with this image , It will not install anything from this external (4gb sandisk SD card)
1: I did have this Booting from Internal 32gb SD , and same thing ,, could not install anything from there.
I think the internal Ram is messed up, but I do not know how to check it ?
Click to expand...
Click to collapse
It is possible it is messed up. There was a discussion in verygreen's CM10.2 thread about trim and bricking emmc. In a post there I think he gave instructions on how to check emmc. Not fix it, but see if it was bricked.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
It is possible it is messed up. There was a discussion in verygreen's CM10.2 thread about trim and bricking emmc. In a post there I think he gave instructions on how to check emmc. Not fix it, but see if it was bricked.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
I'll check that out ,,, Thanks for all your Help
RLeeA said:
Ok, NOOK HD+ finally booted with a External SD image CWM 6032 , but at bottom of CWM page it says
E: Can't mount/cache/recovery/command
E: Can't mount/cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount/cache/recovery/last_log
E: Can't open/cache/recovery/last_log
Click to expand...
Click to collapse
Im having this same issue and at my wits end. I was running Slimbean 4.3 for a couple of weeks with no issues. Whatever happened, happened while the device was running, and not in recovery mode because I was at work at the time, and my daughters told me the nook just turned off. They dont do or know anything about recovery.
Needless to say, none of my nandroid saves will load. Leapinlar, I made an SD boot of your stock 2.1.0 image (using the older winmanager method because im more familiar with it), and it begin to flash, then get stuck halfway and shutdown. Then I reboot and Im stuck at the same CWM bootscreen, which continues to loop. I also tried the flashing the 2.1.1 with the same results. I followed your instructions in your CWM thread to the letter. What can I do?
ps-is there a way i can check for the emmc bug while Im stuck in recovery?
Help please
Soooooo, I have the same problem: recovery loop with CWM version 6.0.3.2
I was stock, and I was able to use the non-image-burn version of the sd-card method to put TWRP. This proved useless because I could not find any documentation on using it properly.
I then burned an image of 6028 and was able to boot right into recovery.
i then attempted an install of 10.1 and gapps .... this is the last time I would reach nook loading screen.
I have actively formatted nothing, though I attempted to install a different recovery
Errors i am receiving:
e: can't mount (volume(s))
installation aborted
internal memory replaces sd-card and sd-card replaces ext-sd.
also, according to "mounts and storage" there are three partitions that are, upon EACH reboot,
unmounted:
/bootdata
/system
/data
/wits
Please help me, this website is my only hope.
:silly:
Jahallah said:
Soooooo, I have the same problem: recovery loop with CWM version 6.0.3.2
I was stock, and I was able to use the non-image-burn version of the sd-card method to put TWRP. This proved useless because I could not find any documentation on using it properly.
I then burned an image of 6028 and was able to boot right into recovery.
i then attempted an install of 10.1 and gapps .... this is the last time I would reach nook loading screen.
I have actively formatted nothing, though I attempted to install a different recovery
Errors i am receiving:
e: can't mount (volume(s))
installation aborted
internal memory replaces sd-card and sd-card replaces ext-sd.
also, according to "mounts and storage" there are three partitions that are, upon EACH reboot,
unmounted:
/bootdata
/system
/data
/wits
Please help me, this website is my only hope.
:silly:
Click to expand...
Click to collapse
Go to my HD/HD+ CWM thread linked in my signature and try flashing the plain stock 2.2.0 zip from item 6 using that burned 6028 CWM SD.
Sent from my BN NookHD+ using XDA Premium HD app
Thank you
leapinlar said:
Go to my HD/HD+ CWM thread linked in my signature and try flashing the plain stock 2.2.0 zip from item 6 using that burned 6028 CWM SD.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
It [email protected]!
Thanks You, Thank you, Thank You, Thank you, thank you thank you thank you thank you thank you thank you,.
So, if I get back to normal very soon, and then decide after 5-10 minutes of stock that I need some CYANOGENMOD, I can use the same boot drives for wreaking some havoc?
So, thanks, I will let you know how it goes.
Thanks Again!
Jahallah said:
It [email protected]!
Thanks You, Thank you, Thank You, Thank you, thank you thank you thank you thank you thank you thank you,.
So, if I get back to normal very soon, and then decide after 5-10 minutes of stock that I need some CYANOGENMOD, I can use the same boot drives for wreaking some havoc?
So, thanks, I will let you know how it goes.
Thanks Again!
Click to expand...
Click to collapse
Yes, as long as it is CM10.2 or lower. CM11 requires a different version of CWM.
Sent from my BN NookHD+ using XDA Premium HD app
stock rom recovered my mount issues
Related
I was trying to install CM10 onto my Nook HD and I somehow screwed it up. I flash ROMS all the time on my MyTouch 4G and i am not a complete stranger to flashing, but I messed it up some how. Now the Nook HD will get past the Nook Banner. I tried a hard reset but it gets like 98% then shuts off. I can still insert an SD and access CWM but nothing will flash and i get this error when I try to do anything.
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
I made a backup on the internal SD but it says there are no files in recovery. I am at a loss. This is my first post I am hoping someone would have an idea.
Thanks
If you tried a hard reset, the first thing it does is format everything. That is why you no longer have a backup on internal memory. Never store backups on internal memory without copying them to SD or your PC for safekeeping. It is the first thing lost on a reset.
Those cache errors mean that the cache partition is not formatted. You need to boot to a CWM SD for stock and format /system, /cache and /data. Then flash the plain stock 2.0.0 stock ROM that I have linked in my HD/HD+ CWM thread. Then you can boot to it, let it update and register again.
Then you can start over with CM10 to SD. And when you said you tried to install it earlier, I hope you meant install to SD. It cannot be installed to internal memory.
Sent from my Nook HD+ running CM10 on Hybrid SD
I'm the same situation. The problem is that these partitions are physically gone.
How do we recreate them? It sounds like something that has to be done using adb, a disk partioning utility (fdisk maybe?) and the names of the devices that need to be created, and then marking /boot as boot.
I've tried to format /cache and the other partitions but it says they don't exist. This problem is also preventing me from installing images including the stock Nook HD software, too, which apparently needs these partitions to exist already.
Thanks in advance for any advice.
aegrotatio said:
I'm the same situation. The problem is that these partitions are physically gone.
How do we recreate them? It sounds like something that has to be done using adb, a disk partioning utility (fdisk maybe?) and the names of the devices that need to be created, and then marking /boot as boot.
I've tried to format /cache and the other partitions but it says they don't exist. This problem is also preventing me from installing images including the stock Nook HD software, too, which apparently needs these partitions to exist already.
Thanks in advance for any advice.
Click to expand...
Click to collapse
I will give you two clues, then do some research.
First to understand the HD/HD+ partition structure, go to my HD/HD+ Tips thread linked in my signature and read item 16.
Second, the HD/HD+ uses a GPT partition structure rather than the standard DOS MBR structure. You need to use gdisk instead of fdisk. Search the Nook Tablet forum to understand a little more about gdisk and GPT. The NT also uses it.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
I will give you two clues, then do some research.
First to understand the HD/HD+ partition structure, go to my HD/HD+ Tips thread linked in my signature and read item 16.
Second, the HD/HD+ uses a GPT partition structure rather than the standard DOS MBR structure. You need to use gdisk instead of fdisk. Search the Nook Tablet forum to understand a little more about gdisk and GPT. The NT also uses it.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Thanks for the clues. I was hoping someone could have a plug-and-play solution for this that I can use.
But, I'll see what I can do to solve this puzzle but I'm about to mail this thing to someone who can restore it and buy a new one at this point.
.
bricked my nook hd+
Hi guys, I'm a noob and yet I took a chance to upgrade my nook hd+ into CM 10.2. On the initial boot with CWM sd card, my nook recognized it right away. I followed "installing cyanogenmod 10.2(instead of 10.1) for dummies After much trouble I was able to "reboot system now". Now as I rebooted from the CWM 10.2 install, all I get is an initial boot with nook for a few seconds which flashes in and out then switches to the cyanogen universal bootloader after power button is pressed a number of times. Then much to my surprise it loaded the page EMMC CWM Based recovery v6.0.3.2. I pressed reboot system now but it didn't load CWM cyanogenmod but only loads nook's initial boot page, flashes same page in & out, then after pressing on the power button a number of times, would switch to the cyanogen universal bootloader, pressing the power button some more brings the screen to EMMC CWM Based recovery v6.0.3.2. The choices here are: 1. reboot system now, 2. install zip from sd card (CWM sd card is still inserted in nook hd+), 3. install zip from sideload, 4. wipe data/factory reset, 5. wipe cache partition, 6. backup and restore, 7. mount & storage, and 8. advanced. What should be done from here? PLEASE HELP. Thanks
newbienyc said:
Hi guys, I'm a noob and yet I took a chance to upgrade my nook hd+ into CM 10.2. On the initial boot with CWM sd card, my nook recognized it right away. I followed "installing cyanogenmod 10.2(instead of 10.1) for dummies BUT when I was about to "reboot system now", instead of pressing the n button, the power button was pressed. Now as I rebooted from the CWM 10.2 install, all I get is an initial boot with nook for a few seconds and switches immediately to the cyanogen universal bootloader and NEVER progresses but simply stays there. The only way to turn it off is by pressing on the power button to shut it off. Is the nook hd+ rendered useless from now on?Is there any remedy to this? If and when I download and write on another microsd card the nook 2.1 zip to revert to the original nook will the nook hd+ be able to recognize the microsd card and boot from it? Thank you.
Click to expand...
Click to collapse
Quick question leapinlar. Does the 8 failed boots hard reset also restore the /boot partition to stock given your recovery is stock and not cwm or other?
ididitforthenookie said:
Quick question leapinlar. Does the 8 failed boots hard reset also restore the /boot partition to stock given your recovery is stock and not cwm or other?
Click to expand...
Click to collapse
You need stock recovery still on internal memory for the 8 failed boot to work. But if it works, everything is completely back to stock, including /boot.
Sent from my Nook HD+ running CM10.1 on emmc.
newbienyc said:
Hi guys, I'm a noob and yet I took a chance to upgrade my nook hd+ into CM 10.2. On the initial boot with CWM sd card, my nook recognized it right away. I followed "installing cyanogenmod 10.2(instead of 10.1) for dummies BUT when I was about to "reboot system now", instead of pressing the n button, the power button was pressed. Now as I rebooted from the CWM 10.2 install, all I get is an initial boot with nook for a few seconds and switches immediately to the cyanogen universal bootloader and NEVER progresses but simply stays there. The only way to turn it off is by pressing on the power button to shut it off. Is the nook hd+ rendered useless from now on?Is there any remedy to this? If and when I download and write on another microsd card the nook 2.1 zip to revert to the original nook will the nook hd+ be able to recognize the microsd card and boot from it? Thank you.
Click to expand...
Click to collapse
The only 10.2 out yet is an SD install. If you haven't already, I would suggest to power off, remove the SD card and try booting from internal storage.
Sent from my HD+ Running CM 10.1 from emmc
Sherip said:
The only 10.2 out yet is an SD install. If you haven't already, I would suggest to power off, remove the SD card and try booting from internal storage.
Sent from my HD+ Running CM 10.1 from emmc
Click to expand...
Click to collapse
Hi, thanks for the quick response. Do you mean rebooting the nook hd+ without the CWM sd card? Yes, I've done this step to no avail. It would boot to the EMMC CWM based recovery v6.0.3.2. I've to be honest, whilst waiting for a response, I tried to remedy the situation by trying to install CWM 10.1 but the upgrade cannot get installed, then the android mascot just seemed to die (open chest with an exclamation point inside a red triangle). Does this mean it's irreparable?
newbienyc said:
Hi, thanks for the quick response. Do you mean rebooting the nook hd+ without the CWM sd card? Yes, I've done this step to no avail. It would boot to the EMMC CWM based recovery v6.0.3.2. I've to be honest, whilst waiting for a response, I tried to remedy the situation by trying to install CWM 10.1 but the upgrade cannot get installed, then the android mascot just seemed to die (open chest with an exclamation point inside a red triangle). Does this mean it's irreparable?
Click to expand...
Click to collapse
As Sherip said, the CM10.2 is an SD install only. You should not have been following the Dummies guide for installing that. That is for installing to internal memory. You need to go to my HD/HD+ CWM thread linked in my signature and put stock recovery back on internal. I have a link to it in my item 5 in that thread. Then the device can successfully do an 8 failed boot to get back to stock.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
As Sherip said, the CM10.2 is an SD install only. You should not have been following the Dummies guide for installing that. That is for installing to internal memory. You need to go to my HD/HD+ CWM thread linked in my signature and put stock recovery back on internal. I have a link to it in my item 5 in that thread. Then the device can successfully do an 8 failed boot to get back to stock.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Thanks. (sorry for being such a dummy) I tried flashing NookHDpus-emmc-...zip to my nook hd+ but this is the response I get each time I try and choose zip from sdcard, E: Can't mount /sdcard?
ididitforthenookie said:
Quick question leapinlar. Does the 8 failed boots hard reset also restore the /boot partition to stock given your recovery is stock and not cwm or other?
Click to expand...
Click to collapse
Forgive me but does 8 failed boots mean turning on my nook and the initial phase of boot-up with"nook" just fades in and out and does hard reset mean pressing on power and n buttons simultaneously till it comes on? Thanks
newbienyc said:
Forgive me but does 8 failed boots mean turning on my nook and the initial phase of boot-up with"nook" just fades in and out and does hard reset mean pressing on power and n buttons simultaneously till it comes on? Thanks
Click to expand...
Click to collapse
It means
1. turn on the nook,
2. when it starts to boot up press and hold power until it turns off.
3. turn it back on,
4. repeat steps 2 & 3 8x.
It needs to be 8 "failed" boots, that get interrupted before it has a chance to get all the way through the process.
bpaulien said:
It means
1. turn on the nook,
2. when it starts to boot up press and hold power until it turns off.
3. turn it back on,
4. repeat steps 2 & 3 8x.
It needs to be 8 "failed" boots, that get interrupted before it has a chance to get all the way through the process.
Click to expand...
Click to collapse
I did this twice and it booted up alright but right into this screen "EMMC CWM based recovery v6.0.3.2". I'm at myself, but I thank you all for your best efforts at helping me .
newbienyc said:
I did this twice and it booted up alright but right into this screen "EMMC CWM based recovery v6.0.3.2". I'm at myself, but I thank you all for your best efforts at helping me .
Click to expand...
Click to collapse
8 failed boots will not work unless you have stock recovery still on emmc. It looks like you replaced stock recovery with CWM. You either have to flash a stock ROM (which also replaces the CWM with stock recovery) or you need to flash my stock recovery zip from my HD/HD+ CWM thread linked in my signature.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
8 failed boots will not work unless you have stock recovery still on emmc. It looks like you replaced stock recovery with CWM. You either have to flash a stock ROM (which also replaces the CWM with stock recovery) or you need to flash my stock recovery zip from my HD/HD+ CWM thread linked in my signature.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Thanks, I will be following your instruction (perhaps flash your stock ROM) with a new microsd card. :fingers-crossed: Hope i'll get it right this time.
leapinlar said:
8 failed boots will not work unless you have stock recovery still on emmc. It looks like you replaced stock recovery with CWM. You either have to flash a stock ROM (which also replaces the CWM with stock recovery) or you need to flash my stock recovery zip from my HD/HD+ CWM thread linked in my signature.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
I did try using a new sd card and an old one, both failed; why is the message always "E: Can't mount /sdcard/"? I was hoping to sideload but my laptop cannot even recognize the nook attached by usb.
newbienyc said:
I did try using a new sd card and an old one, both failed; why is the message always "E: Can't mount /sdcard/"? I was hoping to sideload but my laptop cannot even recognize the nook attached by usb.
Click to expand...
Click to collapse
I don't know why it gives you that error message. I recommend you go to my HD/HD+ CWM thread linked in my signature and make one of my CWM bootable SDs from item 1. Then flash my plain stock 2.1.0 zip from my item 6.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
I don't know why it gives you that error message. I recommend you go to my HD/HD+ CWM thread linked in my signature and make one of my CWM bootable SDs from item 1. Then flash my plain stock 2.1.0 zip from my item 6.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
I'll do that, thanks.
So my Nook HD+ has been running Evergreen's CM 10.1 EMMC fine for a couple weeks. I've had some lag issues so I ran Lagfix and it worked great (though that's another topic). Today, I ran Lagfix again and my HD+ froze. I pressed the power button for 12 seconds to shut it off and it wouldn't boot, just a black screen. Crap.
Ok, no panic. I try pressing the power button for 30 seconds, plug it in, etc. Nothing. Ok, no biggie, going to have to reflash, right? So I download the updated 6/13 Cm10.1 EMMC, copy it over to my CWM SD card, stick it into my HD+ and boot. Boots into CWM no problem. First thing I see is:
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open/cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open/cache/recovery/last_log
Click to expand...
Click to collapse
Well I've seen that before, so I don't panic as I seem to recall its not a serious error. So I wipe cache thinking that maybe its corrupted. Not sure if that was smart or stupid but it seems it doesn't matter, because I try and install from SDcard and I get can't mount SDcard. Yikes! I choose install from internal SD and I get can't mount EMMC. Yikes!! I try and restore a backup, there is no backup as sdcard can't mount! Ok so I reboot and try it again a few times, the same error. I try running chkdsk on the SD card on my desktop and it checks out fine, no errors. I tried swapping in another clean and newly formatted fat32 SD card with only CM10.1 on it and it won't mount either.
I try going to advance->boot to recovery and pull out the sdcard. My HD+ boots and then is stuck at the screen where it says "NOOK" in white. Right before recovery should load. Its like recovery is missing or something.
Ok, I'm getting nervous that I have a serious problem. I boot my CWM SD card again and plug the HD+ into my desktop (Windows) and run ADB. I can adb shell, so I try and mount sdcard from the shell. I get
mount: mounting /dev/block/mmcblk1p1 on /sdcard failed: no such file or directory.
Click to expand...
Click to collapse
Ok, lets try sideload: adb sideload cm.zip.
failed to write data 'protocol fault (no status)
Click to expand...
Click to collapse
Ok, I have a trick I did one time before when I had a similar problem. I try and run:
adb shell mount -t tmpfs none /sdcard
This should mount my ram as sdcard and then I can push the rom to ram and flash from there. However, the error I get is like tmpfs doesn't exist. Ok, I am no expert so at this point I am stuck.
I didn't want to wipe anything yet as I don't know what that would do. At this point being able to boot into my CWM SD card is the only thing that works and I don't want to mess with it as I am now out of my knowledge area.
Anyone know what I can do here? I mean I can't restore a backup or flash a new rom. Does the HD+ have a download mode so I can use Odin? Is fastboot an option here? I am a few days behind on my backup but I can live with a factory reset if that is called for, no problem.
I've hit panic time, please help! Thanks!
Isn't lagfix that zip that reformats your partitions? How did you flash that on an HD+?
Sent from my Galaxy Tab 2 using XDA Premium
leapinlar said:
Isn't lagfix that zip that reformats your partitions? How did you flash that on an HD+?
Sent from my Galaxy Tab 2 using XDA Premium
Click to expand...
Click to collapse
I'm glad you saw this, as I could use your Nook guruness right about now. This is it: https://play.google.com/store/apps/details?id=com.grilledmonkeydonate.lagfix&feature=search_result. Its just a GUI for fstrim and it runs it on /data.
Is there a download mode on the Nook by any chance? If I could Odin this rom on there, I think I'd be all set, but I have to say, the fact that CWM SD can't mount or find EMMC has me worried.
silkshadow said:
I'm glad you saw this, as I could use your Nook guruness right about now. This is it: https://play.google.com/store/apps/details?id=com.grilledmonkeydonate.lagfix&feature=search_result. Its just a GUI for fstrim and it runs it on /data.
Is there a download mode on the Nook by any chance? If I could Odin this rom on there, I think I'd be all set, but I have to say, the fact that CWM SD can't mount or find EMMC has me worried.
Click to expand...
Click to collapse
That sounds like a dangerous thing to be playing with. There is not a download mode and Odin is for Samsung devices.
It sounds like you borked your partitions. Did you replace the stock recovery with CWM or TWRP?
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
That sounds like a dangerous thing to be playing with. There is not a download mode and Odin is for Samsung devices.
It sounds like you borked your partitions. Did you replace the stock recovery with CWM or TWRP?
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
I did initially (like 2 weeks ago) replace the stock recovery with TWRP. I've run TWRP backups a bunch since then. Of course, those are useless with CWM SD, but I have 2 CWM nandroids on my CWM SD (which I can't access since CWM can't mount the SD ). BTW I am using, and used originally, your CWM SD image.
If I screwed up my partitions, is there a fix I can perform from CWM SD or adb?
Edit: BTW, Lagfix also runs fstrim on /cache as well, I had forgotten.
silkshadow said:
I did initially (like 2 weeks ago) replace the stock recovery with TWRP. I've run TWRP backups a bunch since then. Of course, those are useless with CWM SD, but I have 2 CWM nandroids on my CWM SD (which I can;t access since CWM can't mount the SD ). BTW I am using, and used originally, your CWM SD image.
If I screwed up my partitions, is there a fix I can perform from CWM SD?
Click to expand...
Click to collapse
If you had not replaced stock recovery with TWRP you could have done the 8 failed boot reset, but you cannot with TWRP. Also those TWRP backups are worthless because the TWRP emmc backup/restore is broken for the HD+.
You can try to repair the partitions with ADB when booted to CWM. First thing I would try is to DD the boot.img and recovery.img from your CWM backups. Boot.img goes to partition 4 and recovery.img goes to p3.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
If you had not replaced stock recovery with TWRP you could have done the 8 failed boot reset, but you cannot with TWRP. Also those TWRP backups are worthless because the TWRP emmc backup/restore is broken for the HD+.
You can try to repair the partitions with ADB when booted to CWM. First thing I would try is to DD the boot.img and recovery.img from your CWM backups. Boot.img goes to partition 4 and recovery.img goes to p3.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
I've actually been wanting to put CWM instead of TWRP, but I've been nervous about messing with recovery since I had a problem doing that on an old Samsung. Man I wish I had just bit the bullet and re-flashed CWM.
I know how to DD, but repairing the partitions is a step above what I've done before. Is there a tutorial on how to do this? Thanks!
Edit: Wait maybe I don't know how to DD. cat proc/mtd gives an error. How do I identify what to backup?
Edit2: Nevermind, I knew I saw it somewhere and there it is in your tips thread. Sorry, my bad. I'll report back after I have done it.
Ok, I'm stuck, sorry. How do I get the boot.img from my PC to my Nook? CWM won't mount SDcard. Can I just push the file to /data and then restore it from there?
Edit: Fastboot doesn't seem to work in CWM recovery?
silkshadow said:
Ok, I'm stuck, sorry. How do I get the boot.img from my PC to my Nook? CWM won't mount SDcard. Can I just push the file to /data and then restore it from there?
Click to expand...
Click to collapse
Maybe, if your /data is still ok.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
Maybe, if your /data is still ok.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Thanks, trying it now.
Ok:
~ # dd if=/data/boot.img of=/dev/block/mmcblk0p4
dd if=/data/boot.img of=/dev/block/mmcblk0p4
32768+0 records in
32768+0 records out
16777216 bytes (16.0MB) copied, 0.445588 seconds, 35.9MB/s
~ # dd if=/data/recovery.img of=/dev/block/mmcblk0p3
dd if=/data/recovery.img of=/dev/block/mmcblk0p3
30720+0 records in
30720+0 records out
15728640 bytes (15.0MB) copied, 0.397918 seconds, 37.7MB/s
Click to expand...
Click to collapse
Ok, this is a stupid question but how do I tell if it worked? The HD still won't boot without CWM SD card and sdcard or EMMC doesn't mount in CWM SD. Reboot ot recovery in CWM SD, then removing SD card, still gives me "nook" start up screen hang.
Was /data able to take the *.img files? If so, would it be a good idea to push the cm 10.1 rom to it and try and do a full flash? That doesn't have a boot partition though, right?
Edit: BTW, /data was empty in adb shell (except for the 2 img files i pushed there). There was a "media" subdir but it was also empty.
silkshadow said:
Ok:
Ok, this is a stupid question but how do I tell if it worked? The HD still won't boot without CWM SD card and sdcard or EMMC doesn't mount in CWM SD. Reboot ot recovery in CWM SD, then removing SD card, still gives me "nook" start up screen hang.
Click to expand...
Click to collapse
Take the card out, boot holding the power and n key. It should try to boot to recovery. Which backup did you use, stock or one you did after the CM10.1 install?
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
Take the card out, boot holding the power and n key. It should try to boot to recovery. Which backup did you use, stock or one you did after the CM10.1 install?
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
The HD still doesn't boot at all without the CWM SD card in. Just black screen. I can get it to boot without the SD card only if I choose advanced->boot to recovery in CWM SD. Then it just hands at the "nook" screen (the one before Cyanogenmod boot universal boot should appear).
I *think* it was the one from CM 10.1 but I cannot be 100% sure. Its the last backup I did on the CWM SD, and I recall thinking that I should have a backup of CM 10.1 but sometimes I am an idiot and don't listen to myself.
silkshadow said:
Was /data able to take the *.img files? If so, would it be a good idea to push the cm 10.1 rom to it and try and do a full flash? That doesn't have a boot partition though, right?
Edit: BTW, /data was empty in adb shell (except for the 2 img files i pushed there). There was a "media" subdir but it was also empty.
Click to expand...
Click to collapse
no, putting the CM10.1 rom zip on /data will do no good. You can't get to it to flash it. And the cm zip does include the boot partition.
/data being empty means that data was wiped somehow.
Sent from my Nook HD+ running CM10.1 on emmc.
---------- Post added at 09:20 AM ---------- Previous post was at 09:16 AM ----------
silkshadow said:
The HD still doesn't boot at all without the CWM SD card in. Just black screen. I can get it to boot without the SD card only if I choose advanced->boot to recovery in CWM SD. Then it just hands at the "nook" screen (the one before Cyanogenmod boot universal boot should appear).
I *think* it was the one from CM 10.1 but I cannot be 100% sure. Its the last backup I did on the CWM SD, and I recall thinking that I should have a backup of CM 10.1 but sometimes I am an idiot and don't listen to myself.
Click to expand...
Click to collapse
It would be best if you could restore the boot and recovery from a stock backup. Then stock can try to repair itself.
Edit: if it will not turn on without the SD inserted, you may have also messed up xloader and bootloader partitions.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
no, putting the CM10.1 rom zip on /data will do no good. You can't get to it to flash it. And the cm zip does include the boot partition.
/data being empty means that data was wiped somehow.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Ouch but /data loss is not too big, especially at this point. I just want to say you are awesome and thank you so much for helping me here! Anything I can do next? I am not sure what I could've done to wipe data. My HD was lagging a bit today but nothing serious. Just ran lagfix and it froze, but as soon as it froze I shut the Nook down.
Is it strange that I cannot mount EMMC? Is it possible that CWM is not seeing /data on EMMC but just a virtual /data?
Edit: Ok, will try to restore from stock imgs right now.
Ok these are definitely the stock boot and recovery CWM backup images:
~ # dd if=/data/recovery.img of=/dev/block/mmcblk0p3
dd if=/data/recovery.img of=/dev/block/mmcblk0p3
30720+0 records in
30720+0 records out
15728640 bytes (15.0MB) copied, 0.401123 seconds, 37.4MB/s
~ # dd if=/data/boot.img of=/dev/block/mmcblk0p4
dd if=/data/boot.img of=/dev/block/mmcblk0p4
32768+0 records in
32768+0 records out
16777216 bytes (16.0MB) copied, 0.443817 seconds, 36.1MB/s
Click to expand...
Click to collapse
Here's a strange thing. I was expecting to have to go into /data and delete the older boot.img and recovery.img before pushing the new ones. However, /data was empty again.
Ok stock img (I hope) were restored. HD will still not boot (black screen) :crying:. CWM SD advanced ->boot to recovery still hangs at "nook" boot screen the first time. The 2nd time, just black screen and now nothing but black screens.
More weirdness, I've had to plug the HD in and hold down the power button to get it to boot off the CWM SD card every time I take the CWM SD card out and try to boot without it. I just noticed that when I do this the charge light is green and stays green until CWM loads and then it turns amber.
Could this be a bootloader issue? Is there a way to restore that too?
silkshadow said:
Ok these are definitely the stock boot and recovery CWM backup images:
Here's a strange thing. I was expecting to have to go into /data and delete the older boot.img and recovery.img before pushing the new ones. However, /data was empty again.
Ok stock img (I hope) were restored. HD will still not boot (black screen) :crying:. CWM SD advanced ->boot to recovery still hangs at "nook" boot screen the first time. The 2nd time, just black screen and now nothing but black screens.
More weirdness, I've had to plug the HD in and hold down the power button to get it to boot off the CWM SD card every time I take the CWM SD card out and try to boot without it. I just noticed that when I do this the charge light is green and stays green until CWM loads and then it turns amber.
Could this be a bootloader issue? Is there a way to restore that too?
Click to expand...
Click to collapse
When you say black screen without the SD in, you mean it will not turn on?
It looks like the stock stuff took. I might be able to post my stock Xloader and bootloader img files for you. Hang on.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
When you say black screen without the SD in, you mean it will not turn on?
It looks like the stock stuff took. I might be able to post my stock Xloader and bootloader img files for you. Hang on.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Yes, It doesn't seem to boot at all.
You.Rule. Thanks!
silkshadow said:
Yes, It doesn't seem to boot at all.
You.Rule. Thanks!
Click to expand...
Click to collapse
try dding these.
http://d-h.st/SG6
Sent from my Nook HD+ running CM10.1 on emmc.
Thank you very much! I will download and DD right now.
Hi all,
I run CM10.1 on my phone but am new to the Nook HD+. I have emmc-cwm-early2.1.img dd-ed to an SD card, and it boots just fine. I have cm-10.1-20130719-UNOFFICIAL-ovation-emmc.zip downloaded on the Nook. The problem I'm encountering is that backups are failing with "Can't mount /system!" after boot is backed up. It seems foolish to flash any ROM without an initial nandroid backup.
If I select advanced->show log I see this line:
W: failed to mount /dev/block/mmcblk1p2 (Invalid argument)
However, the Nook boots just fine into my unmodified stock if I remove the SD card.
Help? Thanks!
crazybikeperson said:
Hi all,
I run CM10.1 on my phone but am new to the Nook HD+. I have emmc-cwm-early2.1.img dd-ed to an SD card, and it boots just fine. I have cm-10.1-20130719-UNOFFICIAL-ovation-emmc.zip downloaded on the Nook. The problem I'm encountering is that backups are failing with "Can't mount /system!" after boot is backed up. It seems foolish to flash any ROM without an initial nandroid backup.
If I select advanced->show log I see this line:
W: failed to mount /dev/block/mmcblk1p2 (Invalid argument)
However, the Nook boots just fine into my unmodified stock if I remove the SD card.
Help? Thanks!
Click to expand...
Click to collapse
If you are trying to backup to the sdcard, there is not enough room there to hold a complete backup. It usually fails about the time it gets to /system. The solution is to backup to internal memory where it has plenty of room. That mmcblk1p2 failure is just not finding the sd-ext partition on SD. A normal error.
Sent from my Galaxy Tab 2 using XDA Premium
leapinlar said:
If you are trying to backup to the sdcard, there is not enough room there to hold a complete backup. It usually fails about the time it gets to /system. The solution is to backup to internal memory where it has plenty of room. That mmcblk1p2 failure is just not finding the sd-ext partition on SD. A normal error.
Sent from my Galaxy Tab 2 using XDA Premium
Click to expand...
Click to collapse
"backup to internal sdcard" failed as well with "Can't mount /system!"
crazybikeperson said:
"backup to internal sdcard" failed as well with "Can't mount /system!"
Click to expand...
Click to collapse
Go to my HD/HD+ CWM thread linked in my signature and try one of my 6.0.2.8 CWM SDs from item one. Try backing up with it.
Sent from my Galaxy Tab 2 using XDA Premium
leapinlar said:
Go to my HD/HD+ CWM thread linked in my signature and try one of my 6.0.2.8 CWM SDs from item one. Try backing up with it.
Sent from my Galaxy Tab 2 using XDA Premium
Click to expand...
Click to collapse
That seemed to work. I also flashed an sdcard version of CM10.1 and it boots. However, I forgot to install gapps. Now I can't seem to get the Nook to boot into recovery - it only wants to boot CM10.1. Sigh.
crazybikeperson said:
That seemed to work. I also flashed an sdcard version of CM10.1 and it boots. However, I forgot to install gapps. Now I can't seem to get the Nook to boot into recovery - it only wants to boot CM10.1. Sigh.
Click to expand...
Click to collapse
When the cyanoboot logo first comes up, hold the power and n button together for a few seconds and release. It should boot to CWM.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
When the cyanoboot logo first comes up, hold the power and n button together for a few seconds and release. It should boot to CWM.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Unfortunately that didn't work. What did work was replacing the bootfiles on the sdcard... but recovery can't find the gapps .zip file, or anything I downloaded while running CM. I reinstalled CM, and now I can't get back into recovery.
Ugh, this is hard. I'm starting to regret buying it, since the point was to put CM on it.
crazybikeperson said:
Unfortunately that didn't work. What did work was replacing the bootfiles on the sdcard... but recovery can't find the gapps .zip file, or anything I downloaded while running CM. I reinstalled CM, and now I can't get back into recovery.
Ugh, this is hard. I'm starting to regret buying it, since the point was to put CM on it.
Click to expand...
Click to collapse
You need to go to settings and about tablet. Tap the build number several times until developer options is activated. Then go to developer options and check off advanced reboot. Then when you choose reboot on the power off menu, recovery shows.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
You need to go to settings and about tablet. Tap the build number several times until developer options is activated. Then go to developer options and check off advanced reboot. Then when you choose reboot on the power off menu, recovery shows.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
I tried that in the beginning. It just rebooted into CM.
crazybikeperson said:
I tried that in the beginning. It just rebooted into CM.
Click to expand...
Click to collapse
You have all your boot files all mixed up. I give up.
Sent from my Nook HD+ running CM10.1 on emmc.
Hello,
my mess started after I flashed [Nook HD/HD+][SD Install][4.4] CM11.0/SGT7 (KitKat) http://forum.xda-developers.com/showthread.php?t=2583952, after i had CM 10.2 running stable for some while.
After I booted up CM 11 from SD and not really liking it, I removed my SD to start CM 10.2 on emmc again, which it did, but after I picked up my Nook HD+ after a little while, it showed the NOOK start screen, and the device didnt start anymore.
Booting up from SD in goes into recovery showing:
Missing /bootdata/BCB before starting the CWR.
Log file says towards the end:
I:Checking for extendedcommand...
I:Skipping execution of extendedcommand, file not found
...
I:Can't partition non-vfat: /emmc (ext4).
So there is probably something wrong with the partioning of my NookHD+'s emmc, right? Is there a way to repartition my Nook by the likes of Item 16 in your "[USER Tips] HD/HD+ Stock Root User Tips" Thread.
I've tried so far:
Flashing Plain-Stock ROM, Stock revovery, and leapinlar's (who has been a great help) FIX.zip for bricked devices.
I would be very grateful, if s.o. could maybe help me.
Best regards!
My repair zip should have fixed that missing /bootdata/BCB. And those three I: messages are not errors, but information messages which are normal. So there is nothing there saying you have messed up partitions.
You said you had CM11 on SD. Are you still using the CWM SD from that install or are you using the bootable CWM from my thread?
Sent from my SCH-i705 using XDA Premium 4 mobile app
I have used both, and both are booting, also used TWRP 2.6..but only when using CWM-based recovery for CM 11.0 v 6.0.4.5, I get the "/bootdata/BCB missing. Running recovery." message. Always have, since problem exists, even before contacting you, because i formated everything.
When using TWRP 2.6 to install any zip I get:
E:Unable to find parition size for '/recovery'
E:Unable to find parition size for '/boot'
E:Unkown File System: 'datamedia'
and yes, it says parition instead partition.
When installing your repair-emmc-bootdata.zip or stock-recovery.zip it goes through as "Successful".
Installing 2.2.0-plain-stock.zip ends with
Random offset: 0x28x (SOMETIMES OTHER NUMBER)
Boot files...
Boot files...
TWRP states 27070 MB Internal Storage.
guuus said:
I have used both, and both are booting, also used TWRP 2.6..but only when using CWM-based recovery for CM 11.0 v 6.0.4.5, I get the "/bootdata/BCB missing. Running recovery." message. Always have, since problem exists, even before contacting you, because i formated everything.
When using TWRP 2.6 to install any zip I get:
E:Unable to find parition size for '/recovery'
E:Unable to find parition size for '/boot'
E:Unkown File System: 'datamedia'
and yes, it says parition instead partition.
When installing your repair-emmc-bootdata.zip or stock-recovery.zip it goes through as "Successful".
Installing 2.2.0-plain-stock.zip ends with
Random offset: 0x28x (SOMETIMES OTHER NUMBER)
Boot files...
Boot files...
TWRP states 27070 MB Internal Storage.
Click to expand...
Click to collapse
I can think of no other help.
Sent from my SCH-i705 using XDA Premium 4 mobile app
thats a real bummer, coming from THE nook expert. Does the offset notification tell you anything? I tried installing plain-stock, stock-recovery, repair bootdata with your SD CWM again, with the same results, as with TWRP.
Guess I have bury my Nook, and just get a Nexus 7.
To Bad
guuus said:
Does the offset notification tell you anything? I tried installing plain-stock, stock-recovery, repair bootdata with your SD CWM again, with the same results, as with TWRP.
Click to expand...
Click to collapse
No, those messages from the plain stock zip are completely normal. Those TWRP messages sound suspicious though.
Sent from my SCH-i705 using XDA Premium 4 mobile app
Repair ZIP
leapinlar said:
My repair zip should have fixed that missing /bootdata/BCB. And those three I: messages are not errors, but information messages which are normal. So there is nothing there saying you have messed up partitions.
You said you had CM11 on SD. Are you still using the CWM SD from that install or are you using the bootable CWM from my thread?
Sent from my SCH-i705 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Please tell if your Repair ZIP will work for my problem and from where I can get it.
my NOOK HD+ I have CMW 10.2.1 with 6.0.4.6 recovery. Nook went to loop while booting. Now I can go to recovery and able to boot SD recovery CMW 6.0.2.8. But issue is:-
1. For any update even for Stock ROM it gives status 7 error.
2. With system recovery 6.0.4.6 when I try factory reset the TAB reboot same happen when i try to format DATA. While factory reset and DATA format happens with 6.0.2.8 position remains same.
3. When I try to make backup on internal storage both with 6.0.4.6 (TAB recovery) or 6.0.2.8 (From SD card) it makes boot,recovery and system image but give error as failed to backup /DATA.
4. I have done every thing right from various and latest ROM's ( error Status 7), Formatting boot,system but 6.0.4.6 on NOOK is intact and is in loop.
Please tell How I can over come this STATUS 7 error or DATA backup error.
thanks.
Out of the middle of nowhere my HD+ stopped booting and would stick on the "nook" screen could not get into recovery. Been running versions of CM for more than a year without any issues and was currently running the latest CM11. After trying several different versions of CWM, I found two that it would boot to recovery. Now the issue is that while it will boot to recovery, I get continuous errors that it can't mount anything. Can't mount cache, ext SD, or the internal SD. Also I cannot connect to it via the USB cable. I'm stuck! I cannot mount anything so therefore cannot recover. Can anyone help?
philshel said:
Out of the middle of nowhere my HD+ stopped booting and would stick on the "nook" screen could not get into recovery. Been running versions of CM for more than a year without any issues and was currently running the latest CM11. After trying several different versions of CWM, I found two that it would boot to recovery. Now the issue is that while it will boot to recovery, I get continuous errors that it can't mount anything. Can't mount cache, ext SD, or the internal SD. Also I cannot connect to it via the USB cable. I'm stuck! I cannot mount anything so therefore cannot recover. Can anyone help?
Click to expand...
Click to collapse
Try going to my HD/HD+ CWM thread linked in my signature and flash stock recovery back to internal as described in item 5. Then try the 8 failed boot procedure by interrupting the boot by powering off 8 times in a row. See what that does.
Sent from my BN NookHD+ using XDA Premium HD app
If my memory is correct, had the mounting issue when I had played with wiping of the emmc. The sdcard recovery I think was what had worked as flashing from emmc recovery couldnt be done due to the mounting issue which the sdcard recovery had no problem with. Or something like that. Its not really bricked yet.
leapinlar said:
Try going to my HD/HD+ CWM thread linked in my signature and flash stock recovery back to internal as described in item 5. Then try the 8 failed boot procedure by interrupting the boot by powering off 8 times in a row. See what that does.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
I tried #5 already and I cannot flash as it say's that it cannot mount the SD card.
Tried the "8 times" trick and it still hung on the 9th boot.
The symptoms are the same as the emmc bug from a while back but I was not using the software that was causing that issue.
I was having power/charging issues that immediately proceeded the issue. The nook was draining unusually fast and was not charging as usual, I had several incomplete boots just prior to the issue but I several successful boots prior to this issue.
It is acting like the factory partitions are gone/corrupt.
philshel said:
It is acting like the factory partitions are gone/corrupt.
Click to expand...
Click to collapse
If you use sdcard twrp recovery you can use the built in file explorer to check if your emmc is showing up normal or not. At least I would think that would be a good indicator instead of simply assuming the worst.
sandsofmyst said:
If my memory is correct, had the mounting issue when I had played with wiping of the emmc. The sdcard recovery I think was what had worked as flashing from emmc recovery couldnt be done due to the mounting issue which the sdcard recovery had no problem with. Or something like that. Its not really bricked yet.
Click to expand...
Click to collapse
I cannot mount the SD card either. It will boot from the SD but will not access any other files on the card, just throws the "cannot mount sdcard" error
philshel said:
I cannot mount the SD card either. It will boot from the SD but will not access any other files on the card, just throws the "cannot mount sdcard" error
Click to expand...
Click to collapse
D'oh I forgot you may also need to go into the mount options of the sdcard recovery and make sure to mount the stuff. Sorry, been a while hard to remember.
sandsofmyst said:
If you use sdcard twrp recovery you can use the built in file explorer to check if your emmc is showing up normal or not. At least I would think that would be a good indicator instead of simply assuming the worst.
Click to expand...
Click to collapse
I id not know twrp had that function will give that a try.
philshel said:
I id not know twrp had that function will give that a try.
Click to expand...
Click to collapse
Its buried in advanced or something, but its there. Comes in handy.
16465969924
sandsofmyst said:
D'oh I forgot you may also need to go into the mount options of the sdcard recovery and make sure to mount the stuff. Sorry, been a while hard to remember.
Click to expand...
Click to collapse
When I use the recovery's mount menu, it throws the same "cannot mount....." error.
philshel said:
When I use the recovery's mount menu, it throws the same "cannot mount....." error.
Click to expand...
Click to collapse
Might be only leapinlar can help you there.
At least is was good to attempt to exhaust all possible easy fixes. A better idea comes forth.
sandsofmyst said:
Might be only leapinlar can help you there.
At least is was good to attempt to exhaust all possible easy fixes. A better idea comes forth.
Click to expand...
Click to collapse
I appreciate all the help/ideas I can get.
sandsofmyst said:
Its buried in advanced or something, but its there. Comes in handy.
Click to expand...
Click to collapse
No go, gets to the "teamwin" screen and just freezes there.
Well, guess I have a parts HD+ available.
Every post I find with the
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't mount cache/recovery/last_log
E:Can't open /cache/recovery/last_log
Click to expand...
Click to collapse
issue ends without any form of resolution. The opinion seem to be that the emmc is toast. I can't even run from the SD as it won't mount the ext. SD either.