Install Nandroid ZIP Woes - One (M7) Q&A, Help & Troubleshooting

I can't for the life of my install a stock nandroid to my HTC One. I have tried everything and i can't restore it to the BM___001 nandroid. I need to restore it to stock and i am out of tricks. Suggestions?

Want to give some more details? Which custom recovery are you using? What commands have you been using? What errors you get?

deeevan said:
Want to give some more details? Which custom recovery are you using? What commands have you been using? What errors you get?
Click to expand...
Click to collapse
I am trying to install the BM____001 nandroid with CWM. I put the unzipped folder in the right location and cwm does see it. I tried flashing the straight zip and it fails. I try flashing through ROM Manager and it fails. I will re flash to get error codes for you.

MKVFTW said:
I am trying to install the BM____001 nandroid with CWM. I put the unzipped folder in the right location and cwm does see it.
Click to expand...
Click to collapse
You can forget about the rest of your attempts. CWM nandroids are not flashed. Just report back the error you got when you selected the folder to restore.

deeevan said:
You can forget about the rest of your attempts. CWM nandroids are not flashed. Just report back the error you got when you selected the folder to restore.
Click to expand...
Click to collapse
I knew that but tried anyways. I can't even get the the folder to show up in the backup menu to try and restore.

MKVFTW said:
I knew that but tried anyways. I can't even get the the folder to show up in the backup menu to try and restore.
Click to expand...
Click to collapse
I thought you said CWM could see it? Was that a typo?
I'm guessing you're on a 4.2.2 ROM? CWM still thinks your sdcard is at /data/media not the new /data/media/0. Move the clockworkmod folder into /data/media and CWM should be able to see your backups.

deeevan said:
I thought you said CWM could see it? Was that a typo?
I'm guessing you're on a 4.2.2 ROM? CWM still thinks your sdcard is at /data/media not the new /data/media/0. Move the clockworkmod folder into /data/media and CWM should be able to see your backups.
Click to expand...
Click to collapse
.
Got it, and have restored with the CWM backup. Now once it boots, the touch screen does not work. Previously i was on GPe 4.3 and have since updated the firmware.
Downloaded the appropriate BM OTA from the RUU collection and tried to install it and it gives me CID missmatch. I changed from CID 1111111 back to BM___001 and it still gives me the same issue. So i pulled the firmware.zip from the OTA and flashed it via rebootRUU. It flashed sucessfully (both times) and restarted. Still the touch wont work.
I am at a loss with this thing.

Related

stock rom (rooted)

This is a clockworkmod back up of the Hero_C_Sprint_2-1.27.651.5_R mod!! I rooted then made this recovery. For anybody that doesn't want to go through the load of @#$% I had to go through to update my prl. Just unzip and put in the clockworkmod/backup folder on your sd card then you can install it from Rom manager or recovery.
http://dl.dropbox.com/u/22765899/stock.zip
Shows error code 404.
Sorry about that didn't realize it would take that long to upload to dropbox. Should be good now.
Sent from my HERO200 using XDA App
I tried to flash this from recovery and got an md5 mismatch error. Any ideas?
nharvill said:
I tried to flash this from recovery and got an md5 mismatch error. Any ideas?
Click to expand...
Click to collapse
You don't flash it. You need to restore it - it's a nandroid backup, not a ROM.
Sorry, I'm new to this. I did download ClockworkMod Recovery 3.0.0.5 using Method I, don't know if I did it correct. Did not see anything different then, don't know if I was supposed to. I did unzip your stock.zip but don't see the clockworkmod/backup folder. Do I use Rom Manage to install from Recovery. Hopefully only one last question, do you have the RUU 1.56.651.1. That is what was original on my phone and where I want to end up. I really appreciate all the help. I'll never upgrade again without thorough research. This has been a nightmare.
kady2003 said:
Sorry, I'm new to this. I did download ClockworkMod Recovery 3.0.0.5 using Method I, don't know if I did it correct. Did not see anything different then, don't know if I was supposed to. I did unzip your stock.zip but don't see the clockworkmod/backup folder. Do I use Rom Manage to install from Recovery. Hopefully only one last question, do you have the RUU 1.56.651.1. That is what was original on my phone and where I want to end up. I really appreciate all the help. I'll never upgrade again without thorough research. This has been a nightmare.
Click to expand...
Click to collapse
If you don't see the clockworkmod/backup folder on your SD card, trying backing up your current ROM first. That will create the folder if it doesn't exist. Then you put the unzipped files from stock.zip under the backup folder. Open ROM Manager, select Manage and Restore Backups, and then select the folder with those unzipped files.
do you lose root if you do this to update the prl?
motoelliot said:
do you lose root if you do this to update the prl?
Click to expand...
Click to collapse
He says it's rooted, so you shouldn't.
You won't lose root if you use it to update prl and profile, just don't click on update software. Then the software patch could revert you to stock.
Sent from my HTC Hero CDMA using XDA App

what is the point of making backup?

i made a stock backup before going to cm10.1 and then try to restore stock backup but i stuck on htc screen, i installed vipervivo and made a backup before applying a new stock and afterwords i want to back to vipervivo and some restore error in recovery mode, i never changed my recovery im using CWM 5.0.2. hboot2.02, s-on. one thing i dont understand if these backups never gonna work so whats point to made them??. now i have to install vipervivo again and all the app again. crap
Mr909 said:
i made a stock backup before going to cm10.1 and then try to restore stock backup but i stuck on htc screen, i installed vipervivo and made a backup before applying a new stock and afterwords i want to back to vipervivo and some restore error in recovery mode, i never changed my recovery im using CWM 5.0.2. hboot2.02, s-on. one thing i dont understand if these backups never gonna work so whats point to made them??. now i have to install vipervivo again and all the app again. crap
Click to expand...
Click to collapse
You need to get the boot.img from the restore and flash it in fastboot -.-
072665995 said:
You need to get the boot.img from the restore and flash it in fastboot -.-
Click to expand...
Click to collapse
i did in my stock recovery, but how on earth i can do it on my vipervivo rom backup because CWM is nor restoring my backup,i dont remember now but some restore failed error.
Mr909 said:
i did in my stock recovery, but how on earth i can do it on my vipervivo rom backup because CWM is nor restoring my backup,i dont remember now but some restore failed error.
Click to expand...
Click to collapse
I would suggest to achieve S-Off and then you could try another recovery.
And btw. most backups work for me, just sometimes backup of /system fails, but I can still restore the Rest
I am pretty sure that the bootloops accur, because every Rom you installed uses another kernel and your device is S-On, so you can't flash the boot.IMG within recovery
Gizmo648 said:
I would suggest to achieve S-Off and then you could try another recovery.
And btw. most backups work for me, just sometimes backup of /system fails, but I can still restore the Rest
I am pretty sure that the bootloops accur, because every Rom you installed uses another kernel and your device is S-On, so you can't flash the boot.IMG within recovery
Click to expand...
Click to collapse
I tried many times to s-off my device but i every time when i ran RUU i got the 170 error usb connection and i did many things to resolve that error but failed
Mr909 said:
I tried many times to s-off my device but i every time when i ran RUU i got the 170 error usb connection and i did many things to resolve that error but failed
Click to expand...
Click to collapse
Then you could still try another recovery, but remember, you always have to take the boot.IMG from the backup and flash it with fastboot
Gizmo648 said:
Then you could still try another recovery, but remember, you always have to take the boot.IMG from the backup and flash it with fastboot
Click to expand...
Click to collapse
i tried again and this time when i ran RUU i got the unknown error 155.do u have any idea how i solved this issue im using
HTML:
http://forum.xda-developers.com/showthread.php?t=2118187
this guide
Mr909 said:
i tried again and this time when i ran RUU i got the unknown error 155.do u have any idea how i solved this issue im using
HTML:
http://forum.xda-developers.com/showthread.php?t=2118187
this guide
Click to expand...
Click to collapse
Error 155 means that you are trying to run the RUU on a phone with an unlocked bootloader.
Gizmo648 said:
I would suggest to achieve S-Off and then you could try another recovery.
And btw. most backups work for me, just sometimes backup of /system fails, but I can still restore the Rest
I am pretty sure that the bootloops accur, because every Rom you installed uses another kernel and your device is S-On, so you can't flash the boot.IMG within recovery
Click to expand...
Click to collapse
now my device is s-off and blackrose ae well but still cant restore those backups, what a waste
Mr909 said:
now my device is s-off and blackrose ae well but still cant restore those backups, what a waste
Click to expand...
Click to collapse
then it might be a recovery related problem.use another recovery like 4ext or twrp
072665995 said:
then it might be a recovery related problem.use another recovery like 4ext or twrp
Click to expand...
Click to collapse
i have found some where, will it apply to me?
You got that error because you were trying to restore a backup that uses the rfs file system on a CWM that only works with the ext4 file system. You can only restore a stock ROM with CWM 5.0.2.7. Here's a link
Mr909 said:
i have found some where, will it apply to me?
You got that error because you were trying to restore a backup that uses the rfs file system on a CWM that only works with the ext4 file system. You can only restore a stock ROM with CWM 5.0.2.7. Here's a link
Click to expand...
Click to collapse
Its certainly possible although Ive never had that problem. This is the reason why I recommended you get another recovery like 4EXT or TWRP.
072665995 said:
Its certainly possible although Ive never had that problem. This is the reason why I recommended you get another recovery like 4EXT or TWRP.
Click to expand...
Click to collapse
i tried 4EXT recovery as u suggest but no luck...
i successfully restore cm10.1 backup with CWM and now with 4EXT as well. while i made 2 of vipervivo ROM backup and both of them i cant restore, so it means it is the problem in ROM not in recovery??
i also made a stock backup and tried to restore with both CWM and 4EXT and same issue i faced with both, screen stayed on htc logo for few miniuets and then phone reboot to recovery mode by itself. now im almost 100% sure if i will install vipervivo again and will make abackup with 4EXT it wont be restore and will give a same issue "error while restore system"

[Q] return to stock

Think I have this figured out but just want some advice before I take the plunge! I have a Bell Mobility phone rooted with the lastest Viper Rom. Cracked my screen and want to return it for warranty...so what I gather is I need to relock the bootloader and flash the RUU?
As I cant seem to find an official Bell RUU I have downloaded this
http://bugsylawson.com/files/file/1818-m7-cwm-nandroid-backup-cid-bm-001-1296665/
Sound about right?
No RUU for Bell is available.
Only one solution I thing
1) Get S-OFF (using revone) and unlocked boootloader
2) Flash CWM custom recovery
3) Flash this
M7 CWM Nandroid Backup / CID BM___001 / 1.29.666.5
from here http://forum.xda-developers.com/showthread.php?p=39588860
4) Flash any stock recovery
5) Using revone ,remove TAMPERED , Lock bootloader.
6) Get S-On
7) Return phone to service.
ps.If you made the nandroid backup before flashed custom ROM , use it, instead of item 3.
it would be better.
tash2013 said:
No RUU for Bell is available.
Only one solution I thing
1) Get S-OFF (using revone) and unlocked boootloader
2) Flash CWM custom recovery
3) Flash this
M7 CWM Nandroid Backup / CID BM___001 / 1.29.666.5
from here http://forum.xda-developers.com/showthread.php?p=39588860
4) Flash any stock recovery
5) Using revone ,remove TAMPERED , Lock bootloader.
6) Get S-On
7) Return phone to service.
ps.If you made the nandroid backup before flashed custom ROM , use it, instead of item 3.
it would be better.
Click to expand...
Click to collapse
I cant find a stock recovery that will work
faroreefer said:
I cant find a stock recovery that will work
Click to expand...
Click to collapse
stock recovery is here: http://android-revolution-hd.blogspot.com/p/android-revolution-hd-mirror-site-var.html
credits to mike1986
argggg...so frustrated with this. cant flash my origianl back up (post root) says md5 mismatch. cant flash the one that is linked above. just says installation aborted. help??!!
herwegan said:
stock recovery is here: http://android-revolution-hd.blogspot.com/p/android-revolution-hd-mirror-site-var.html
credits to mike1986
Click to expand...
Click to collapse
Can you use that stock recovery on 4.2.2 firmware. As it says 4.1.2 recovery, thanks.
Sent from my HTC One using xda premium
faroreefer said:
argggg...so frustrated with this. cant flash my origianl back up (post root) says md5 mismatch. cant flash the one that is linked above. just says installation aborted. help??!!
Click to expand...
Click to collapse
well, if you get a md5 mismatch there's nothing you can do, this file must be corrupt then.
edit: can you give us some more information about your device/rom/bootloader? and which custom recovery are you using?
jadaress1 said:
Can you use that stock recovery on 4.2.2 firmware. As it says 4.1.2 recovery, thanks.
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
yes, you should be able to use it since it's for 2.17.401.1 and all firmwares above 2 are based on 4.2.2. maybe mike just forgot to change it..
Hboot 1.44.0000
The rom is viper 1.0
Cwm recovery v6.0.3.0
Sent from my HTC One S using xda app-developers app
faroreefer said:
Hboot 1.44.0000
The rom is viper 1.0
Cwm recovery v6.0.3.0
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
ok, so since the nandroid is for cwm and you are using cwm, this can not be the problem. are you sure that you've placed the nandroid backup in the correct cwm backup folder? so in cwm you can find it under "restore" but then you get an error?
edit: your bootloader is still unlocked isn't it?
herwegan said:
ok, so since the nandroid is for cwm and you are using cwm, this can not be the problem. are you sure that you've placed the nandroid backup in the correct cwm backup folder?[/
pretty sure. I made a backup of the current rom, and then placeed the backup in the same folder. The most current backup restores fine, so i dont think thats it.
Click to expand...
Click to collapse
faroreefer said:
ok, so since the nandroid is for cwm and you are using cwm, this can not be the problem. are you sure that you've placed the nandroid backup in the correct cwm backup folder?[/
pretty sure. I made a backup of the current rom, and then placeed the backup in the same folder. The most current backup restores fine, so i dont think thats it.
Click to expand...
Click to collapse
... i'd really like to help you, but this..... so your own backup file is corrupt and the one from the collection here on xda gives an error, right? do you have cid BM___001?
herwegan said:
ok, so since the nandroid is for cwm and you are using cwm, this can not be the problem. are you sure that you've placed the nandroid backup in the correct cwm backup folder? so in cwm you can find it under "restore" but then you get an error?
edit: your bootloader is still unlocked isn't it?
Click to expand...
Click to collapse
yep & s-off
faroreefer said:
yep & s-off
Click to expand...
Click to collapse
look what i found on the downloadpage: "Backup created with ClockworkMod Recovery v6.0.3.1"
maybe that's the key? try to flash cwm 6.0.3.1 and then the backup
herwegan said:
look what i found on the downloadpage: "Backup created with ClockworkMod Recovery v6.0.3.1"
maybe that's the key? try to flash cwm 6.0.3.1 and then the backup
Click to expand...
Click to collapse
YES!! that did it. so i have the stock rom flashed. but now ive flashed the recovery from the previous suggestion and all i have is a big red triangle?!
frustraion level 9.1
faroreefer said:
YES!! that did it. so i have the stock rom flashed. but now ive flashed the recovery from the previous suggestion and all i have is a big red triangle?!
frustraion level 9.1
Click to expand...
Click to collapse
great! don't worry, this is how it should be now because you've flashed STOCK-recovery all fine, now just leave it like that, use revone to lock your bootloader and finally use hasoon2000's toolkit to switch back to s-on. and voilà, you're completely stock then :highfive:
herwegan said:
great! don't worry, this is how it should be now because you've flashed STOCK-recovery all fine, now just leave it like that, use revone to lock your bootloader and finally use hasoon2000's toolkit to switch back to s-on. and voilà, you're completely stock then :highfive:
Click to expand...
Click to collapse
DONE and DONE! only took 2 days.lol
thanks for the assistance
faroreefer said:
DONE and DONE! only took 2 days.lol
thanks for the assistance
Click to expand...
Click to collapse
congrats, you're welcome, glad i could help

Help please!

I always get a unsuccessful message when flashing rom through twrp. After that, I wanna restore my stock 4.1 I backup earlier, but it went into boot loop after I restore, I had Odin back to stock for twice, reroot and things remain the same, any help?
Thanks in advance!
If i remember right in TWRP must mount your system before flash.
Powered by CM11
R_a_z_v_a_n said:
If i remember right in TWRP must mount your system before flash.
Powered by CM11
Click to expand...
Click to collapse
I'm a newbie, can you kindly link me to a related article about that? Thanks btw
quanlim said:
I'm a newbie, can you kindly link me to a related article about that? Thanks btw
Click to expand...
Click to collapse
What error message receive in TWRP after you try to flash?
R_a_z_v_a_n said:
What error message receive in TWRP after you try to flash?
Click to expand...
Click to collapse
I'm not able to boot after that, I Odin back to stock, it showed failed after trying to flash
quanlim said:
I'm not able to boot after that, I Odin back to stock, it showed failed after trying to flash
Click to expand...
Click to collapse
From what ROM you are trying to restore?
quanlim said:
... it showed failed after trying to flash
Click to expand...
Click to collapse
And the cause which led to the installation failure?
Try to use CWM recovery from CoCore Kernel and see if you can flash custom ROM's.
But make a backup in CWM of your stock ROM, because that one from TWRP don't work in CWM.
I have never had any bugs/errors with CWM, NEVET. So try to follow Razvan's comment
elementbt said:
I have never had any bugs/errors with CWM, NEVET. So try to follow Razvan's comment
Click to expand...
Click to collapse
I will try first, will report back =D
elementbt said:
I have never had any bugs/errors with CWM, NEVET. So try to follow Razvan's comment
Click to expand...
Click to collapse
Using CWM, getting a 'bad zip' message, when I try to restore, it says 'md5 mismatch'
quanlim said:
Using CWM, getting a 'bad zip' message, when I try to restore, it says 'md5 mismatch'
Click to expand...
Click to collapse
I can't really help. Try to search on forum for this error, I have read something about it time ago but can't remember where, sorry.
quanlim said:
Using CWM, getting a 'bad zip' message, when I try to restore, it says 'md5 mismatch'
Click to expand...
Click to collapse
Redownload the ROM. Zip is corrupted, or you renamed the folder zip and name contain spaces.
Try first with redownload. I'm almost sure for corrupted zip.
R_a_z_v_a_n said:
Redownload the ROM. Zip is corrupted, or you renamed the folder zip and name contain spaces.
Try first with redownload. I'm almost sure for corrupted zip.
Click to expand...
Click to collapse
Ok, and how about the unable to restore what i backed up? btw, just to double confirm, do I flash CWM by downloading Cocore, extract it, and flash the tar.md5 with universal kernel flasher?
quanlim said:
Ok, and how about the unable to restore what i backed up? btw, just to double confirm, do I flash CWM by downloading Cocore, extract it, and flash the tar.md5 with universal kernel flasher?
Click to expand...
Click to collapse
Make sure what version you flash. If your phone is I9070P you must download EP version, and for I9070 must flash E version.
R_a_z_v_a_n said:
Make sure what version you flash. If your phone is I9070P you must download EP version, and for I9070 must flash E version.
Click to expand...
Click to collapse
Re-rooted, install recovery, just not able to flash roms, still get the 'bad' message, redownloaded the rom, and tried other roms too
quanlim said:
Re-rooted, install recovery, just not able to flash roms, still get the 'bad' message, redownloaded the rom, and tried other roms too
Click to expand...
Click to collapse
Bro, what kind of phone do you have?
What recovery are you trying to install?
What ROM ?
Tell more details if you want help.
R_a_z_v_a_n said:
Bro, what kind of phone do you have?
What recovery are you trying to install?
What ROM ?
Tell more details if you want help.
Click to expand...
Click to collapse
GT-i9070, rooted with the root.zip (from recovery), flash shaan temporary cwm, from there flashed cocore kernel (CWM), and I'm stuck here, unable to flash roms, unable to restore stock rom backups
quanlim said:
GT-i9070, rooted with the root.zip (from recovery), flash shaan temporary cwm, from there flashed cocore kernel (CWM), and I'm stuck here, unable to flash roms, unable to restore stock rom backups
Click to expand...
Click to collapse
Put screenshot of your system
R_a_z_v_a_n said:
Put screenshot of your system
Click to expand...
Click to collapse
here you go
quanlim said:
here you go
Click to expand...
Click to collapse
Hmm, now you have custom recovery.
Enter in recovery, and if choose backup to sdcard1., and wit until finish that operation and receive message "backup complete".
Then, if you already have downloaded ROM and GApps, make wipe cache and dalvik and do a wipe of data/factory reset (be sure you have already backed up your apps with some backup app like Titanium Backup or other), go to install zip, choose zip from external card and proceed to flash, first ROM after that GApps.

HTC DM and Wifi not turning on

Hi my wifi on my m8 mini is not turning on and there is an error called HTC DM that always pop up. What should I do? I already tried factory reset but it didn't help. TIA
pkdd_ said:
Hi my wifi on my m8 mini is not turning on and there is an error called HTC DM that always pop up. What should I do? I already tried factory reset but it didn't help. TIA
Click to expand...
Click to collapse
try this:
go to setting>aplications>all
find HTC dm
clear cache
force stop
restart phone
kativiti said:
try this:
go to setting>aplications>all
find HTC dm
clear cache
force stop
restart phone
Click to expand...
Click to collapse
Thanks, I already did that but it still pops up. The wifi is not turning on as well. I'm planning to just re-flash the stock rom and I bumped in into this thread: http://forum.xda-developers.com/one-mini-2/general/stock-ruu-rom-recovry-htc-one-mini-2-t3250020
I'm confused on how to reflash it? What is RUU? By the way I can go to TWRP. If you don't mind, I would like some help reflashing the stock rom.
pkdd_ said:
Thanks, I already did that but it still pops up. The wifi is not turning on as well. I'm planning to just re-flash the stock rom and I bumped in into this thread: http://forum.xda-developers.com/one-mini-2/general/stock-ruu-rom-recovry-htc-one-mini-2-t3250020
I'm confused on how to reflash it? What is RUU? By the way I can go to TWRP. If you don't mind, I would like some help reflashing the stock rom.
Click to expand...
Click to collapse
forget that...all you need in here
1-Download file and and unzip (DO NOT RENAME)
2-send to TWRP backup folder
3-Reboot phone to recovery mode TWRP
4-Use restore option (should only exist one described with a date)
5-Swipe to restore.
kativiti said:
forget that...all you need in here
1-Download file and and unzip (DO NOT RENAME)
2-send to TWRP backup folder
3-Reboot phone to recovery mode TWRP
4-Use restore option (should only exist one described with a date)
5-Swipe to restore.
Click to expand...
Click to collapse
How can I copy the file to the TWRP backup folder? When I go to my TWRP folder, there is no backup folder available. Should I create the folder first? Can I do it using my memory card? Thank you.
pkdd_ said:
How can I copy the file to the TWRP backup folder? When I go to my TWRP folder, there is no backup folder available. Should I create the folder first? Can I do it using my memory card? Thank you.
Click to expand...
Click to collapse
create a backup with TWRP.
delete that one and then replace with the file.
dont use sdcard. gives errors
It's a bit too late but I got it fixed. Thank you for the help guys.
Thanks for the help guys ?

Categories

Resources